Commit Graph

16 Commits

Author SHA1 Message Date
Kuniyuki Iwashima
6bae8ceb90 ratelimit: Fix data-races in ___ratelimit().
While reading rs->interval and rs->burst, they can be changed
concurrently via sysctl (e.g. net_ratelimit_state).  Thus, we
need to add READ_ONCE() to their readers.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-24 13:46:57 +01:00
Thomas Gleixner
55716d2643 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428
Based on 1 normalized pattern(s):

  this file is released under the gplv2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 68 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:16 +02:00
Sergey Senozhatsky
656d61ce96 lib/ratelimit.c: use deferred printk() version
printk_ratelimit() invokes ___ratelimit() which may invoke a normal
printk() (pr_warn() in this particular case) to warn about suppressed
output.  Given that printk_ratelimit() may be called from anywhere, that
pr_warn() is dangerous - it may end up deadlocking the system.  Fix
___ratelimit() by using deferred printk().

Sasha reported the following lockdep error:

 : Unregister pv shared memory for cpu 8
 : select_fallback_rq: 3 callbacks suppressed
 : process 8583 (trinity-c78) no longer affine to cpu8
 :
 : ======================================================
 : WARNING: possible circular locking dependency detected
 : 4.14.0-rc2-next-20170927+ #252 Not tainted
 : ------------------------------------------------------
 : migration/8/62 is trying to acquire lock:
 : (&port_lock_key){-.-.}, at: serial8250_console_write()
 :
 : but task is already holding lock:
 : (&rq->lock){-.-.}, at: sched_cpu_dying()
 :
 : which lock already depends on the new lock.
 :
 :
 : the existing dependency chain (in reverse order) is:
 :
 : -> #3 (&rq->lock){-.-.}:
 : __lock_acquire()
 : lock_acquire()
 : _raw_spin_lock()
 : task_fork_fair()
 : sched_fork()
 : copy_process.part.31()
 : _do_fork()
 : kernel_thread()
 : rest_init()
 : start_kernel()
 : x86_64_start_reservations()
 : x86_64_start_kernel()
 : verify_cpu()
 :
 : -> #2 (&p->pi_lock){-.-.}:
 : __lock_acquire()
 : lock_acquire()
 : _raw_spin_lock_irqsave()
 : try_to_wake_up()
 : default_wake_function()
 : woken_wake_function()
 : __wake_up_common()
 : __wake_up_common_lock()
 : __wake_up()
 : tty_wakeup()
 : tty_port_default_wakeup()
 : tty_port_tty_wakeup()
 : uart_write_wakeup()
 : serial8250_tx_chars()
 : serial8250_handle_irq.part.25()
 : serial8250_default_handle_irq()
 : serial8250_interrupt()
 : __handle_irq_event_percpu()
 : handle_irq_event_percpu()
 : handle_irq_event()
 : handle_level_irq()
 : handle_irq()
 : do_IRQ()
 : ret_from_intr()
 : native_safe_halt()
 : default_idle()
 : arch_cpu_idle()
 : default_idle_call()
 : do_idle()
 : cpu_startup_entry()
 : rest_init()
 : start_kernel()
 : x86_64_start_reservations()
 : x86_64_start_kernel()
 : verify_cpu()
 :
 : -> #1 (&tty->write_wait){-.-.}:
 : __lock_acquire()
 : lock_acquire()
 : _raw_spin_lock_irqsave()
 : __wake_up_common_lock()
 : __wake_up()
 : tty_wakeup()
 : tty_port_default_wakeup()
 : tty_port_tty_wakeup()
 : uart_write_wakeup()
 : serial8250_tx_chars()
 : serial8250_handle_irq.part.25()
 : serial8250_default_handle_irq()
 : serial8250_interrupt()
 : __handle_irq_event_percpu()
 : handle_irq_event_percpu()
 : handle_irq_event()
 : handle_level_irq()
 : handle_irq()
 : do_IRQ()
 : ret_from_intr()
 : native_safe_halt()
 : default_idle()
 : arch_cpu_idle()
 : default_idle_call()
 : do_idle()
 : cpu_startup_entry()
 : rest_init()
 : start_kernel()
 : x86_64_start_reservations()
 : x86_64_start_kernel()
 : verify_cpu()
 :
 : -> #0 (&port_lock_key){-.-.}:
 : check_prev_add()
 : __lock_acquire()
 : lock_acquire()
 : _raw_spin_lock_irqsave()
 : serial8250_console_write()
 : univ8250_console_write()
 : console_unlock()
 : vprintk_emit()
 : vprintk_default()
 : vprintk_func()
 : printk()
 : ___ratelimit()
 : __printk_ratelimit()
 : select_fallback_rq()
 : sched_cpu_dying()
 : cpuhp_invoke_callback()
 : take_cpu_down()
 : multi_cpu_stop()
 : cpu_stopper_thread()
 : smpboot_thread_fn()
 : kthread()
 : ret_from_fork()
 :
 : other info that might help us debug this:
 :
 : Chain exists of:
 :   &port_lock_key --> &p->pi_lock --> &rq->lock
 :
 :  Possible unsafe locking scenario:
 :
 :        CPU0                    CPU1
 :        ----                    ----
 :   lock(&rq->lock);
 :                                lock(&p->pi_lock);
 :                                lock(&rq->lock);
 :   lock(&port_lock_key);
 :
 :  *** DEADLOCK ***
 :
 : 4 locks held by migration/8/62:
 : #0: (&p->pi_lock){-.-.}, at: sched_cpu_dying()
 : #1: (&rq->lock){-.-.}, at: sched_cpu_dying()
 : #2: (printk_ratelimit_state.lock){....}, at: ___ratelimit()
 : #3: (console_lock){+.+.}, at: vprintk_emit()
 :
 : stack backtrace:
 : CPU: 8 PID: 62 Comm: migration/8 Not tainted 4.14.0-rc2-next-20170927+ #252
 : Call Trace:
 : dump_stack()
 : print_circular_bug()
 : check_prev_add()
 : ? add_lock_to_list.isra.26()
 : ? check_usage()
 : ? kvm_clock_read()
 : ? kvm_sched_clock_read()
 : ? sched_clock()
 : ? check_preemption_disabled()
 : __lock_acquire()
 : ? __lock_acquire()
 : ? add_lock_to_list.isra.26()
 : ? debug_check_no_locks_freed()
 : ? memcpy()
 : lock_acquire()
 : ? serial8250_console_write()
 : _raw_spin_lock_irqsave()
 : ? serial8250_console_write()
 : serial8250_console_write()
 : ? serial8250_start_tx()
 : ? lock_acquire()
 : ? memcpy()
 : univ8250_console_write()
 : console_unlock()
 : ? __down_trylock_console_sem()
 : vprintk_emit()
 : vprintk_default()
 : vprintk_func()
 : printk()
 : ? show_regs_print_info()
 : ? lock_acquire()
 : ___ratelimit()
 : __printk_ratelimit()
 : select_fallback_rq()
 : sched_cpu_dying()
 : ? sched_cpu_starting()
 : ? rcutree_dying_cpu()
 : ? sched_cpu_starting()
 : cpuhp_invoke_callback()
 : ? cpu_disable_common()
 : take_cpu_down()
 : ? trace_hardirqs_off_caller()
 : ? cpuhp_invoke_callback()
 : multi_cpu_stop()
 : ? __this_cpu_preempt_check()
 : ? cpu_stop_queue_work()
 : cpu_stopper_thread()
 : ? cpu_stop_create()
 : smpboot_thread_fn()
 : ? sort_range()
 : ? schedule()
 : ? __kthread_parkme()
 : kthread()
 : ? sort_range()
 : ? kthread_create_on_node()
 : ret_from_fork()
 : process 9121 (trinity-c78) no longer affine to cpu8
 : smpboot: CPU 8 is now offline

Link: http://lkml.kernel.org/r/20170928120405.18273-1-sergey.senozhatsky@gmail.com
Fixes: 6b1d174b0c ("ratelimit: extend to print suppressed messages on release")
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Borislav Petkov <bp@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-03 17:54:26 -07:00
Borislav Petkov
6b1d174b0c ratelimit: extend to print suppressed messages on release
Extend the ratelimiting facility to print the amount of suppressed lines
when it is being released.

This use case is aimed at short-termed, burst-like users for which we
want to output the suppressed lines stats only once, after it has been
disposed of.  For an example, see /dev/kmsg usage in a follow-on patch.

Also, change the printk() line we issue on release to not use
"callbacks" as it is misleading: we're not suppressing callbacks but
printk() calls.

This has been separated from a previous patch by Linus.

Link: http://lkml.kernel.org/r/20160716061745.15795-2-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Dave Young <dyoung@redhat.com>
Cc: Franck Bui <fbui@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:06 -04:00
Jaewon Kim
c2594bc37f ratelimit: fix bug in time interval by resetting right begin time
rs->begin in ratelimit is set in two cases.
 1) when rs->begin was not initialized
 2) when rs->interval was passed

For case #2, current ratelimit sets the begin to 0.  This incurrs
improper suppression.  The begin value will be set in the next ratelimit
call by 1).  Then the time interval check will be always false, and
rs->printed will not be initialized.  Although enough time passed,
ratelimit may return 0 if rs->printed is not less than rs->burst.  To
reset interval properly, begin should be jiffies rather than 0.

For an example code below:

    static DEFINE_RATELIMIT_STATE(mylimit, 1, 1);
    for (i = 1; i <= 10; i++) {
        if (__ratelimit(&mylimit))
            printk("ratelimit test count %d\n", i);
        msleep(3000);
    }

test result in the current code shows suppression even there is 3 seconds sleep.

  [  78.391148] ratelimit test count 1
  [  81.295988] ratelimit test count 2
  [  87.315981] ratelimit test count 4
  [  93.336267] ratelimit test count 6
  [  99.356031] ratelimit test count 8
  [ 105.376367] ratelimit test count 10

Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 17:20:51 -08:00
Paul Gortmaker
8bc3bcc93a lib: reduce the use of module.h wherever possible
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map
them onto including export.h -- or if the file isn't even
using those, then just delete the include.  Fix up any implicit
include dependencies that were being masked by module.h along
the way.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-07 15:04:04 -05:00
Thomas Gleixner
07354eb1a7 locking, printk: Annotate logbuf_lock as raw
The logbuf_lock lock can be taken in atomic context and therefore
cannot be preempted on -rt - annotate it.

In mainline this change documents the low level nature of
the lock - otherwise there's no functional difference. Lockdep
and Sparse checking will work as usual.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ merged and fixed it ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-13 11:11:54 +02:00
Yong Zhang
57119c34e5 ratelimit: fix the return value when __ratelimit() fails to acquire the lock
The log of commit edaac8e316 ("ratelimit:
Fix/allow use in atomic contexts"), indicates that we want to suppress the
callback when the trylock fails.

Signed-off-by: Yong Zhang <yong.zhang@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:04 -07:00
Yong Zhang
2a7268abc4 ratelimit: annotate ___ratelimit()
To prevent from wrongly using the return value.

[akpm@linux-foundation.org: fix spello]
Signed-off-by: Yong Zhang <yong.zhang@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:04 -07:00
Christian Borntraeger
5c82871335 ratelimit: Make suppressed output messages more useful
Today I got:

  [39648.224782] Registered led device: iwl-phy0::TX
  [40676.545099] __ratelimit: 246 callbacks suppressed
  [40676.545103] abcdef[23675]: segfault at 0 ...

as you can see the ratelimit message contains a function prefix.
Since this is always __ratelimit, this wont help much.

This patch changes __ratelimit and printk_ratelimit to print the
function name that calls ratelimit.

This will pinpoint the responsible function, as long as not several
different places call ratelimit with the same ratelimit state at
the same time. In that case we catch only one random function that
calls ratelimit after the wait period.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
CC: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <200910231458.11832.borntraeger@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23 17:26:37 +02:00
Ingo Molnar
3fff4c42bd printk: Remove ratelimit.h from kernel.h
Decouple kernel.h from ratelimit.h: the global declaration of
printk's ratelimit_state is not needed, and it leads to messy
circular dependencies due to ratelimit.h's (new) adding of a
spinlock_types.h include.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22 16:18:09 +02:00
Ingo Molnar
edaac8e316 ratelimit: Fix/allow use in atomic contexts
I'd like to use printk_ratelimit() in NMI context, but it's not
robust right now due to spinlock usage in lib/ratelimit.c. If an
NMI is unlucky enough to hit just that spot we might lock up trying
to take the spinlock again.

Fix that by using a trylock variant. If we contend on that lock we
can genuinely skip the message because the state is just being
accessed by another CPU (or by this CPU).

( We could use atomics for the suppressed messages field, but
  i doubt it matters in practice and it makes the code heavier. )

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22 14:05:48 +02:00
Ingo Molnar
979f693def ratelimit: Use per ratelimit context locking
I'd like to use printk_ratelimit() in atomic context, but that's
not possible right now due to the spinlock usage this commit
introduced more than a year ago:

  717115e: printk ratelimiting rewrite

As a first step push the lock into the ratelimit state structure.
This allows us to deal with locking failures to be considered as an
event related to that state being too busy.

Also clean up the code a bit (without changing functionality):

 - tidy up the definitions

 - clean up the code flow

This also shrinks the code a tiny bit:

   text	   data	    bss	    dec	    hex	filename
    264	      0	      4	    268	    10c	ratelimit.o.before
    255	      0	      0	    255	     ff	ratelimit.o.after

( Whole-kernel data size got a bit larger, because we have
  two ratelimit-state data structures right now. )

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22 15:31:34 +02:00
Alexey Dobriyan
4d9c377c81 __ratelimit() cpu flags can't be static
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 16:30:20 -07:00
Dave Young
717115e1a5 printk ratelimiting rewrite
All ratelimit user use same jiffies and burst params, so some messages
(callbacks) will be lost.

For example:
a call printk_ratelimit(5 * HZ, 1)
b call printk_ratelimit(5 * HZ, 1) before the 5*HZ timeout of a, then b will
will be supressed.

- rewrite __ratelimit, and use a ratelimit_state as parameter.  Thanks for
  hints from andrew.

- Add WARN_ON_RATELIMIT, update rcupreempt.h

- remove __printk_ratelimit

- use __ratelimit in net_ratelimit

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:29 -07:00
Dave Young
5f97a5a879 isolate ratelimit from printk.c for other use
Due to the rcupreempt.h WARN_ON trigged, I got 2G syslog file.  For some
serious complaining of kernel, we need repeat the warnings, so here I isolate
the ratelimit part of printk.c to a standalone file.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:06 -07:00