mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 14:21:47 +00:00
a070a08d00
6332 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
6cdebf62a1 |
spi: Updates for v6.9
This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used in
future to allow controllers to directly trigger SPI operations (eg, from
interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages.
- A big set of updates from Uwe Kleine-König moving drivers to use APIs
with more modern terminology for controllers.
- Major overhaul of the s3c64xx driver.
- Support for Google GS101 and Samsung Exynos850.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvHx0ACgkQJNaLcl1U
h9ATVQf/WafEp7ddJ23bRaHZx/gBCMgv8N6mN7OBnzB2pMIGL56SPf9fGAmCUQKt
mne6fDg6/RpydG/72TFppUjRFLN9CwoJjJfQIXMgOqYuPaMEnrj1wbcXar3MeeX2
8hS1u7wKwhOuuwLmoqqMOTKyGUj2mHsBOTOo0vm4WM1s9IHhY5TG2clYv1A+KZbj
kSHE5m7YnBLwimwu0+hsXnRNHZUGKVksQ/9t7AD7/7L8aPj9jPqu1EjTS1/6IDB0
QDVyW7Z6hX7YoUx48gp+j/UFJ7ZyxTajy+0wvzPHou3KJARgFfNZWT2XvvYcpA0/
yqcpbCUwZ1AETXHcmly7YwNpPV9LBg==
=+Xw/
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used
in future to allow controllers to directly trigger SPI operations (eg,
from interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages
- A big set of updates from Uwe Kleine-König moving drivers to use
APIs with more modern terminology for controllers
- Major overhaul of the s3c64xx driver
- Support for Google GS101 and Samsung Exynos850"
* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
spi: Introduce SPI_INVALID_CS and is_valid_cs()
spi: Fix types of the last chip select storage variables
spi: Consistently use BIT for cs_index_mask
spi: Exctract spi_dev_check_cs() helper
spi: Exctract spi_set_all_cs_unused() helper
spi: s3c64xx: switch exynos850 to new port config data
spi: s3c64xx: switch gs101 to new port config data
spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
spi: s3c64xx: get rid of the OF alias ID dependency
spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
spi: s3c64xx: let the SPI core determine the bus number
spi: s3c64xx: allow FIFO depth to be determined from the compatible
spi: s3c64xx: retrieve the FIFO depth from the device tree
spi: s3c64xx: determine the fifo depth only once
spi: s3c64xx: allow full FIFO masks
spi: s3c64xx: define a magic value
spi: dt-bindings: introduce FIFO depth properties
spi: axi-spi-engine: use struct_size() macro
spi: axi-spi-engine: use __counted_by() attribute
spi: axi-spi-engine: remove p from struct spi_engine_message_state
...
|
||
|
Linus Torvalds
|
ca7e917769 |
Rework of APIC enumeration and topology evaluation:
The current implementation has a couple of shortcomings:
- It fails to handle hybrid systems correctly.
- The APIC registration code which handles CPU number assignents is in
the middle of the APIC code and detached from the topology evaluation.
- The various mechanisms which enumerate APICs, ACPI, MPPARSE and guest
specific ones, tweak global variables as they see fit or in case of
XENPV just hack around the generic mechanisms completely.
- The CPUID topology evaluation code is sprinkled all over the vendor
code and reevaluates global variables on every hotplug operation.
- There is no way to analyze topology on the boot CPU before bringing up
the APs. This causes problems for infrastructure like PERF which needs
to size certain aspects upfront or could be simplified if that would be
possible.
- The APIC admission and CPU number association logic is incomprehensible
and overly complex and needs to be kept around after boot instead of
completing this right after the APIC enumeration.
This update addresses these shortcomings with the following changes:
- Rework the CPUID evaluation code so it is common for all vendors and
provides information about the APIC ID segments in a uniform way
independent of the number of segments (Thread, Core, Module, ..., Die,
Package) so that this information can be computed instead of rewriting
global variables of dubious value over and over.
- A few cleanups and simplifcations of the APIC, IO/APIC and related
interfaces to prepare for the topology evaluation changes.
- Seperation of the parser stages so the early evaluation which tries to
find the APIC address can be seperately overridden from the late
evaluation which enumerates and registers the local APIC as further
preparation for sanitizing the topology evaluation.
- A new registration and admission logic which
- encapsulates the inner workings so that parsers and guest logic
cannot longer fiddle in it
- uses the APIC ID segments to build topology bitmaps at registration
time
- provides a sane admission logic
- allows to detect the crash kernel case, where CPU0 does not run on
the real BSP, automatically. This is required to prevent sending
INIT/SIPI sequences to the real BSP which would reset the whole
machine. This was so far handled by a tedious command line
parameter, which does not even work in nested crash scenarios.
- Associates CPU number after the enumeration completed and prevents
the late registration of APICs, which was somehow tolerated before.
- Converting all parsers and guest enumeration mechanisms over to the
new interfaces.
This allows to get rid of all global variable tweaking from the parsers
and enumeration mechanisms and sanitizes the XEN[PV] handling so it can
use CPUID evaluation for the first time.
- Mopping up existing sins by taking the information from the APIC ID
segment bitmaps.
This evaluates hybrid systems correctly on the boot CPU and allows for
cleanups and fixes in the related drivers, e.g. PERF.
The series has been extensively tested and the minimal late fallout due to
a broken ACPI/MADT table has been addressed by tightening the admission
logic further.
-----BEGIN PGP SIGNATURE-----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=/5oR
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC updates from Thomas Gleixner:
"Rework of APIC enumeration and topology evaluation.
The current implementation has a couple of shortcomings:
- It fails to handle hybrid systems correctly.
- The APIC registration code which handles CPU number assignents is
in the middle of the APIC code and detached from the topology
evaluation.
- The various mechanisms which enumerate APICs, ACPI, MPPARSE and
guest specific ones, tweak global variables as they see fit or in
case of XENPV just hack around the generic mechanisms completely.
- The CPUID topology evaluation code is sprinkled all over the vendor
code and reevaluates global variables on every hotplug operation.
- There is no way to analyze topology on the boot CPU before bringing
up the APs. This causes problems for infrastructure like PERF which
needs to size certain aspects upfront or could be simplified if
that would be possible.
- The APIC admission and CPU number association logic is
incomprehensible and overly complex and needs to be kept around
after boot instead of completing this right after the APIC
enumeration.
This update addresses these shortcomings with the following changes:
- Rework the CPUID evaluation code so it is common for all vendors
and provides information about the APIC ID segments in a uniform
way independent of the number of segments (Thread, Core, Module,
..., Die, Package) so that this information can be computed instead
of rewriting global variables of dubious value over and over.
- A few cleanups and simplifcations of the APIC, IO/APIC and related
interfaces to prepare for the topology evaluation changes.
- Seperation of the parser stages so the early evaluation which tries
to find the APIC address can be seperately overridden from the late
evaluation which enumerates and registers the local APIC as further
preparation for sanitizing the topology evaluation.
- A new registration and admission logic which
- encapsulates the inner workings so that parsers and guest logic
cannot longer fiddle in it
- uses the APIC ID segments to build topology bitmaps at
registration time
- provides a sane admission logic
- allows to detect the crash kernel case, where CPU0 does not run
on the real BSP, automatically. This is required to prevent
sending INIT/SIPI sequences to the real BSP which would reset
the whole machine. This was so far handled by a tedious command
line parameter, which does not even work in nested crash
scenarios.
- Associates CPU number after the enumeration completed and
prevents the late registration of APICs, which was somehow
tolerated before.
- Converting all parsers and guest enumeration mechanisms over to the
new interfaces.
This allows to get rid of all global variable tweaking from the
parsers and enumeration mechanisms and sanitizes the XEN[PV]
handling so it can use CPUID evaluation for the first time.
- Mopping up existing sins by taking the information from the APIC ID
segment bitmaps.
This evaluates hybrid systems correctly on the boot CPU and allows
for cleanups and fixes in the related drivers, e.g. PERF.
The series has been extensively tested and the minimal late fallout
due to a broken ACPI/MADT table has been addressed by tightening the
admission logic further"
* tag 'x86-apic-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
x86/topology: Ignore non-present APIC IDs in a present package
x86/apic: Build the x86 topology enumeration functions on UP APIC builds too
smp: Provide 'setup_max_cpus' definition on UP too
smp: Avoid 'setup_max_cpus' namespace collision/shadowing
x86/bugs: Use fixed addressing for VERW operand
x86/cpu/topology: Get rid of cpuinfo::x86_max_cores
x86/cpu/topology: Provide __num_[cores|threads]_per_package
x86/cpu/topology: Rename topology_max_die_per_package()
x86/cpu/topology: Rename smp_num_siblings
x86/cpu/topology: Retrieve cores per package from topology bitmaps
x86/cpu/topology: Use topology logical mapping mechanism
x86/cpu/topology: Provide logical pkg/die mapping
x86/cpu/topology: Simplify cpu_mark_primary_thread()
x86/cpu/topology: Mop up primary thread mask handling
x86/cpu/topology: Use topology bitmaps for sizing
x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT
x86/xen/smp_pv: Count number of vCPUs early
x86/cpu/topology: Assign hotpluggable CPUIDs during init
x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug
x86/topology: Add a mechanism to track topology via APIC IDs
...
|
||
Harshit Mogalapalli
|
0314cebb29 |
platform/x86/amd/pmf: Fix missing error code in amd_pmf_init_smart_pc()
On the error path, assign -ENOMEM to ret when memory allocation of
"dev->prev_data" fails.
Fixes:
|
||
Hans de Goede
|
aec7d25b49 |
platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR
On Goldmont p2sb_bar() only ever gets called for 2 devices, the actual P2SB
devfn 13,0 and the SPI controller which is part of the P2SB, devfn 13,2.
But the current p2sb code tries to cache BAR0 info for all of
devfn 13,0 to 13,7 . This involves calling pci_scan_single_device()
for device 13 functions 0-7 and the hw does not seem to like
pci_scan_single_device() getting called for some of the other hidden
devices. E.g. on an ASUS VivoBook D540NV-GQ065T this leads to continuous
ACPI errors leading to high CPU usage.
Fix this by only caching BAR0 info and thus only calling
pci_scan_single_device() for the P2SB and the SPI controller.
Fixes:
|
||
Mario Limonciello
|
427c70dec7 |
platform/x86: thinkpad_acpi: Only update profile if successfully converted
Randomly a Lenovo Z13 will trigger a kernel warning traceback from this
condition:
```
if (WARN_ON((profile < 0) || (profile >= ARRAY_SIZE(profile_names))))
```
This happens because thinkpad-acpi always assumes that
convert_dytc_to_profile() successfully updated the profile. On the
contrary a condition can occur that when dytc_profile_refresh() is called
the profile doesn't get updated as there is a -EOPNOTSUPP branch.
Catch this situation and avoid updating the profile. Also log this into
dynamic debugging in case any other modes should be added in the future.
Fixes:
|
||
|
Hans de Goede
|
84c16d01ff |
platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler
Commit |
||
|
Hans de Goede
|
8215ca5181 |
platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name
The Acer B1 750 tablet used a Novatek NVT-ts touchscreen, not a Goodix touchscreen. Rename acer_b1_750_goodix_gpios to acer_b1_750_nvt_ts_gpios to correctly reflect this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240216201721.239791-5-hdegoede@redhat.com |
||
|
Hans de Goede
|
812a79b52b |
platform/x86: x86-android-tablets: Fix serdev instantiation no longer working
After commit |
||
|
Hans de Goede
|
dc5afd720f |
platform/x86: Add new get_serdev_controller() helper
In some cases UART attached devices which require an in kernel driver, e.g. UART attached Bluetooth HCIs are described in the ACPI tables by an ACPI device with a broken or missing UartSerialBusV2() resource. This causes the kernel to create a /dev/ttyS# char-device for the UART instead of creating an in kernel serdev-controller + serdev-device pair for the in kernel driver. The quirk handling in acpi_quirk_skip_serdev_enumeration() makes the kernel create a serdev-controller device for these UARTs instead of a /dev/ttyS#. Instantiating the actual serdev-device to bind to is up to pdx86 code, so far this was handled by the x86-android-tablets code. But since commit |
||
|
Hans de Goede
|
bd8905d709 |
platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo Yogabook1 X90
After commit |
||
|
Mario Limonciello
|
76d41fb063 |
platform/x86/amd/pmf: Fix a potential race with policy binary sideload
The debugfs `update_policy` file is created before
amd_pmf_start_policy_engine() has completed, and thus there could be
a possible (albeit unlikely) race between sideloading a policy and the
BIOS policy getting setup.
Move the debugfs file creation after all BIOS policy is setup.
Fixes:
|
||
|
Mario Limonciello
|
e709615058 |
platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()
amd_pmf_init_smart_pc() calls out to amd_pmf_get_bios_buffer() but
the error handling flow doesn't clean everything up allocated
memory.
As amd_pmf_get_bios_buffer() is only called by amd_pmf_init_smart_pc(),
fold it into the function and add labels to clean up any step that
can fail along the way. Explicitly set everything allocated to NULL as
there are other features that may access some of the same variables.
Fixes:
|
||
|
Mario Limonciello
|
20545af302 |
platform/x86/amd/pmf: Add debugging message for missing policy data
If a machine advertises Smart PC support but is missing policy data show a debugging message to help clarify why Smart PC wasn't enabled. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240217014107.113749-2-mario.limonciello@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Mario Limonciello
|
b2b6fa6f5c |
platform/x86/amd/pmf: Fix a suspend hang on Framework 13
The buffer is cleared in the suspend handler but used in
the delayed work for amd_pmf_get_metrics().
Stop clearing it to fix the hang.
Reported-by: Trolli Schmittlauch <t.schmittlauch@orlives.de>
Closes: https://lore.kernel.org/regressions/ed2226ff-257b-4cfd-afd6-bf3be9785474@localhost/
Closes: https://community.frame.work/t/kernel-6-8-rc-system-freezes-after-resuming-from-suspend-reproducers-wanted/45381
Fixes:
|
||
Shyam Sundar S K
|
11e298f354 |
platform/x86/amd/pmf: Fix TEE enact command failure after suspend and resume
TEE enact command failures are seen after each suspend/resume cycle;
fix this by cancelling the policy builder workqueue before going into
suspend and reschedule the workqueue after resume.
[ 629.516792] ccp 0000:c2:00.2: tee: command 0x5 timed out, disabling PSP
[ 629.516835] amd-pmf AMDI0102:00: TEE enact cmd failed. err: ffff000e, ret:0
[ 630.550464] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_RESPONSE:1
[ 630.550511] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_ARGUMENT:7
[ 630.550548] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_MESSAGE:16
Fixes:
|
||
|
Shyam Sundar S K
|
3da01394c0 |
platform/x86/amd/pmf: Remove smart_pc_status enum
Improve code readability by removing smart_pc_status enum, as the same can be done with a simple true/false check; Update the code checks accordingly. Also add a missing return on amd_pmf_init_smart_pc() success, to skip trying to setup the auto / slider modes which should not be used in this case. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240216064112.962582-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Hans de Goede
|
f0ddb8a902 |
platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen data
Now that prefix matches for ACPI names are supported, the ts_dmi_data structs for "GDIX1001:00" and "GDIX1001:01" can be consolidated into a single match matching on "GDIX1001". For consistency also change gdix1002_00_upside_down_data to match. Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240212120608.30469-2-hdegoede@redhat.com |
||
|
Hans de Goede
|
dbcbfd662a |
platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names
On some devices the ACPI name of the touchscreen is e.g. either
MSSL1680:00 or MSSL1680:01 depending on the BIOS version.
This happens for example on the "Chuwi Hi8 Air" tablet where the initial
commit's ts_data uses "MSSL1680:00" but the tablets from the github issue
and linux-hardware.org probe linked below both use "MSSL1680:01".
Replace the strcmp() match on ts_data->acpi_name with a strstarts()
check to allow using a partial match on just the ACPI HID of "MSSL1680"
and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly
to fix the touchscreen not working on models where it is "MSSL1680:01".
Note this drops the length check for I2C_NAME_SIZE. This never was
necessary since the ACPI names used are never more then 11 chars and
I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long
before reaching I2C_NAME_SIZE.
Link: https://linux-hardware.org/?computer=AC4301C0542A
Fixes:
|
||
|
Hans de Goede
|
8f812373d1 |
platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()
Since commit |
||
Mark Pearson
|
6f7d0f5fd8 |
platform/x86: think-lmi: Fix password opcode ordering for workstations
The Lenovo workstations require the password opcode to be run before
the attribute value is changed (if Admin password is enabled).
Tested on some Thinkpads to confirm they are OK with this order too.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes:
|
||
Thomas Gleixner
|
bd745d1c41 |
x86/cpu/topology: Rename topology_max_die_per_package()
The plural of die is dies. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Link: https://lore.kernel.org/r/20240213210253.065874205@linutronix.de |
||
Uwe Kleine-König
|
85ad0ec049
|
platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"
In commit
|
||
Phoenix Chen
|
1abdf288b0 |
platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet
Add touch screen info for TECLAST X16 Plus tablet. Signed-off-by: Phoenix Chen <asbeltogf@gmail.com> Link: https://lore.kernel.org/r/20240126095308.5042-1-asbeltogf@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
Jithu Joseph
|
8c898ec07a |
platform/x86/intel/ifs: Call release_firmware() when handling errors.
Missing release_firmware() due to error handling blocked any future image
loading.
Fix the return code and release_fiwmare() to release the bad image.
Fixes:
|
||
Cong Liu
|
a692a86efe |
platform/x86/amd/pmf: Fix memory leak in amd_pmf_get_pb_data()
amd_pmf_get_pb_data() will allocate memory for the policy buffer,
but does not free it if copy_from_user() fails. This leads to a memory
leak.
Fixes:
|
||
|
Shyam Sundar S K
|
cedecdba60 |
platform/x86/amd/pmf: Get ambient light information from AMD SFH driver
AMD SFH driver has APIs defined to export the ambient light information; use this within the PMF driver to send inputs to the PMF TA, so that PMF driver can enact to the actions coming from the TA. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240123141458.3715211-2-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Shyam Sundar S K
|
118063f380 |
platform/x86/amd/pmf: Get Human presence information from AMD SFH driver
AMD SFH driver has APIs defined to export the human presence information; use this within the PMF driver to send inputs to the PMF TA, so that PMF driver can enact to the actions coming from the TA. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240123141458.3715211-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
Shravan Kumar Ramani
|
732c35ce6d |
platform/mellanox: mlxbf-pmc: Fix offset calculation for crspace events
The event selector fields for 2 counters are contained in one
32-bit register and the current logic does not account for this.
Fixes:
|
||
Liming Sun
|
8cbc756b80 |
platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
Starting from Linux 5.16 kernel, Tx timeout mechanism was added in the virtio_net driver which prints the "Tx timeout" warning message when a packet stays in Tx queue for too long. Below is an example of the reported message: "[494105.316739] virtio_net virtio1 tmfifo_net0: TX timeout on queue: 0, sq: output.0, vq: 0×1, name: output.0, usecs since last trans: 3079892256". This issue could happen when external host driver which drains the FIFO is restared, stopped or upgraded. To avoid such confusing "Tx timeout" messages, this commit adds logic to drop the outstanding Tx packet if it's not able to transmit in two seconds due to Tx FIFO full, which can be considered as congestion or out-of-resource drop. This commit also handles the special case that the packet is half- transmitted into the Tx FIFO. In such case, the packet is discarded with remaining length stored in vring->rem_padding. So paddings with zeros can be sent out when Tx space is available to maintain the integrity of the packet format. The padded packet will be dropped on the receiving side. Signed-off-by: Liming Sun <limings@nvidia.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240111173106.96958-1-limings@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
Armin Wolf
|
348d9cc7bd |
platform/x86: intel-wmi-sbl-fw-update: Fix function name in error message
Since when the driver was converted to use the bus-based WMI
interface, the old GUID-based WMI functions are not used anymore.
Update the error message to avoid confusing users.
Compile-tested only.
Fixes:
|
||
Shin'ichiro Kawasaki
|
9e054ed05d |
platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0()
Accesses to resource[] member of struct pci_dev shall be wrapped with pci_resource_n() for future compatibility. Call the helper function in p2sb_read_bar0(). Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20240108062059.3583028-3-shinichiro.kawasaki@wdc.com Tested-by Klara Modin <klarasmodin@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Shin'ichiro Kawasaki
|
5913320eb0 |
platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.
To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
Before operating the device at P2SB DEVFN for resource cache, check
that its device class is PCI_CLASS_MEMORY_OTHER 0x0580 that PCH
specifications define. This avoids unexpected operation to other devices
at the same DEVFN.
Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Fixes:
|
||
Nathan Chancellor
|
416de0246f |
platform/x86: intel-uncore-freq: Fix types in sysfs callbacks
When booting a kernel with CONFIG_CFI_CLANG, there is a CFI failure when
accessing any of the values under
/sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00:
$ cat /sys/devices/system/cpu/intel_uncore_frequency/package_00_die_00/max_freq_khz
fish: Job 1, 'cat /sys/devices/system/cpu/int…' terminated by signal SIGSEGV (Address boundary error)
$ sudo dmesg &| grep 'CFI failure'
[ 170.953925] CFI failure at kobj_attr_show+0x19/0x30 (target: show_max_freq_khz+0x0/0xc0 [intel_uncore_frequency_common]; expected type: 0xd34078c5
The sysfs callback functions such as show_domain_id() are written as if
they are going to be called by dev_attr_show() but as the above message
shows, they are instead called by kobj_attr_show(). kCFI checks that the
destination of an indirect jump has the exact same type as the prototype
of the function pointer it is called through and fails when they do not.
These callbacks are called through kobj_attr_show() because
uncore_root_kobj was initialized with kobject_create_and_add(), which
means uncore_root_kobj has a ->sysfs_ops of kobj_sysfs_ops from
kobject_create(), which uses kobj_attr_show() as its ->show() value.
The only reason there has not been a more noticeable problem until this
point is that 'struct kobj_attribute' and 'struct device_attribute' have
the same layout, so getting the callback from container_of() works the
same with either value.
Change all the callbacks and their uses to be compatible with
kobj_attr_show() and kobj_attr_store(), which resolves the kCFI failure
and allows the sysfs files to work properly.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1974
Fixes:
|
||
Dan Carpenter
|
8446f9d116 |
platform/x86: wmi: Fix wmi_dev_probe()
This has a reversed if statement so it accidentally disables the wmi
method before returning.
Fixes:
|
||
|
Armin Wolf
|
29e473f4b5 |
platform/x86: wmi: Fix notify callback locking
When an legacy WMI event handler is removed, an WMI event could
have called the handler just before it was removed, meaning the
handler could still be running after wmi_remove_notify_handler()
returns.
Something similar could also happens when using the WMI bus, as
the WMI core might still call the notify() callback from an WMI
driver even if its remove() callback was just called.
Fix this by introducing a rw semaphore which ensures that the
event state of a WMI device does not change while the WMI core
is handling an event for it.
Tested on a Dell Inspiron 3505 and a Acer Aspire E1-731.
Fixes:
|
||
|
Armin Wolf
|
3ea7f59af8 |
platform/x86: wmi: Decouple legacy WMI notify handlers from wmi_block_list
Until now, legacy WMI notify handler functions where using the wmi_block_list, which did no refcounting on the returned WMI device. This meant that the WMI device could disappear at any moment, potentially leading to various errors. Fix this by using bus_find_device() which returns an actual reference to the found WMI device. Tested on a Dell Inspiron 3505 and a Acer Aspire E1-731. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240103192707.115512-4-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Armin Wolf
|
3d8a29fec2 |
platform/x86: wmi: Return immediately if an suitable WMI event is found
Commit
|
||
|
Armin Wolf
|
6ba7843b59 |
platform/x86: wmi: Fix error handling in legacy WMI notify handler functions
When wmi_install_notify_handler()/wmi_remove_notify_handler() are
unable to enable/disable the WMI device, they unconditionally return
an error to the caller.
When registering legacy WMI notify handlers, this means that the
callback remains registered despite wmi_install_notify_handler()
having returned an error.
When removing legacy WMI notify handlers, this means that the
callback is removed despite wmi_remove_notify_handler() having
returned an error.
Fix this by only warning when the WMI device could not be enabled.
This behaviour matches the bus-based WMI interface.
Tested on a Dell Inspiron 3505 and a Acer Aspire E1-731.
Fixes:
|
||
|
Linus Torvalds
|
8c94ccc7cd |
USB / Thunderbolt changes for 6.8-rc1
Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaedng8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yndHACfX3SA2ipK5umpMsWOoLMCBV6VyrwAn3t+FPd/
z4mNiCuNUhbEnU7RinK0
=k/E9
-----END PGP SIGNATURE-----
Merge tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: typec: tipd: fix use of device-specific init function
usb: typec: tipd: Separate reset for TPS6598x
usb: mon: Fix atomicity violation in mon_bin_vma_fault
usb: gadget: uvc: Remove nested locking
usb: gadget: uvc: Fix use are free during STREAMOFF
usb: typec: class: fix typec_altmode_put_partner to put plugs
dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
dt-bindings: usb: xhci: Add num-hc-interrupters definition
xhci: add support to allocate several interrupters
USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8939: Drop RPM bus clocks
arm64: dts: qcom: sdm630: Drop RPM bus clocks
arm64: dts: qcom: qcs404: Drop RPM bus clocks
arm64: dts: qcom: msm8996: Drop RPM bus clocks
...
|
||
|
Linus Torvalds
|
bd736f38c0 |
TTY/Serial changes for 6.8-rc1
Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeUaw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykyOgCgp1uhP/b9iW6qM7qL6OYEG6idI0kAnj0VASNm vSI69HmdKKwo69YLOSBp =14n1 -----END PGP SIGNATURE----- Merge tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ... |
||
|
Linus Torvalds
|
296455ade1 |
Char/Misc and other Driver changes for 6.8-rc1
Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Lots of stuff in here, but first off, you will get a merge conflict in drivers/android/binder_alloc.c when merging this tree due to changing coming in through the -mm tree. The resolution of the merge issue can be found here: https://lore.kernel.org/r/20231207134213.25631ae9@canb.auug.org.au or in a simpler patch form in that thread: https://lore.kernel.org/r/ZXHzooF07LfQQYiE@google.com If there are issues with the merge of this file, please let me know. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues (other than the binder merge conflict.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeMMQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynWNgCfQ/Yz7QO6EMLDwHO5LRsb3YMhjL4AoNVdanjP YoI7f1I4GBcC0GKNfK6s =+Kyv -----END PGP SIGNATURE----- Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ... |
||
|
Linus Torvalds
|
42bff4d0f9 |
pwm: Changes for v6.8-rc1
This contains a bunch of cleanups and simplifications across the board, as well as a number of small fixes. Perhaps the most notable change here is the addition of an API that allows PWMs to be used in atomic contexts, which is useful when time- critical operations are involved, such as using a PWM to generate IR signals. Finally, I have decided to step down as PWM subsystem maintainer. Due to other responsibilities I have lately not been able to find the time that the subsystem deserves and Uwe, who has been helping out a lot for the past few years and has many things planned for the future, has kindly volunteered to take over. I have no doubt that he will be a suitable replacement. -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmWhYQAZHHRoaWVycnku cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zobK8EACtzJX+AeoTkN2S671A7QoG IGl9mrFhvrqN/6syigAIU8ZGOgb5uScZDH58PeTXH/oGEMn+bhQ9MK7JyWF5BUzF I8p6CqaVjG66LsfWz1m8AEAl/0N2Sc2032fWQSJB0o8qgYH0ZRBKc1j371Zm2DgD HT78pZJDSnyCnltPKjbDLShRfBwGINspmbihZKFa6yxrPbvADixCTo19b9Pk8XGa S9k2R/9S/QKPxvB+3DiZAHFstwoTn2p+1IBsg+hp/jLniw8XidZp2Rq0RJuwTjqO jVQDnOFOqNBa3VQccvNe23rDaKUkrmYwk+zzuFF27URam2Gp9wHZ8Y86WPSO5TA9 ftNsoeW++R25PBsOVZFGMU9r9aI9XI1tNyVuv2blNc0yr1fNSRzwjcELzLzG2myp gHgdayJofnvlKM7JV5ZDY6BDPwTP9jfDRdZOqKKNUeB8e9IiQD9JtAV9P+EL/5Hl C+7mh5Xb17bVlczWHqNkTd89Omp+Eu2z5BMfJyiQWQ2lzZpxOkBwB0nrlPshZpPi hz5IhsGjREkEfNV2qz/YDEyaj+CAYO8toitFGt5HeAYTftuG4WD49rHE5VQ8nhwg P9XpWNFHK2EtpU3/BRuupWHZRVd7MU4kMx4WQvWZGOFEqc9DYaC29ynk6sK0ryaC ba8U4gpBS66d3wNvVpkN3A== =pIh8 -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This contains a bunch of cleanups and simplifications across the board, as well as a number of small fixes. Perhaps the most notable change here is the addition of an API that allows PWMs to be used in atomic contexts, which is useful when time- critical operations are involved, such as using a PWM to generate IR signals. Finally, I have decided to step down as PWM subsystem maintainer. Due to other responsibilities I have lately not been able to find the time that the subsystem deserves and Uwe, who has been helping out a lot for the past few years and has many things planned for the future, has kindly volunteered to take over. I have no doubt that he will be a suitable replacement" * tag 'pwm/for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (44 commits) MAINTAINERS: pwm: Thierry steps down, Uwe takes over pwm: linux/pwm.h: fix Excess kernel-doc description warning pwm: Add pwm_apply_state() compatibility stub pwm: cros-ec: Drop documentation for dropped struct member pwm: Drop two unused API functions pwm: lpc18xx-sct: Don't modify the cached period of other PWM outputs pwm: meson: Simplify using dev_err_probe() pwm: stmpe: Silence duplicate error messages pwm: Reduce number of pointer dereferences in pwm_device_request() pwm: crc: Use consistent variable naming for driver data pwm: omap-dmtimer: Drop locking dt-bindings: pwm: ti,pwm-omap-dmtimer: Update binding for yaml media: pwm-ir-tx: Trigger edges from hrtimer interrupt context pwm: bcm2835: Allow PWM driver to be used in atomic context pwm: Make it possible to apply PWM changes in atomic context pwm: renesas: Remove unused include pwm: Replace ENOTSUPP with EOPNOTSUPP pwm: Rename pwm_apply_state() to pwm_apply_might_sleep() pwm: Stop referencing pwm->chip pwm: Update kernel doc for struct pwm_chip ... |
||
|
Linus Torvalds
|
fef018d819 |
hid-for-linus-2024010801
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIVAwUAZZxaAaZi849r7WBJAQL3kQ/+O657H6H/yfi2tC/i+S8Q13gWc9bhtYt/ dI90ixcrWnZbNEuSUZ9aLt5UzVfSO2GnsmwGUwRdfMCOIYv42mS9st0JAGvYx0jL xYHaqMW5VHn9pdUBDdgXG90DyivcbprxAldpTyJFr029g1H7vdnp/KXhzveBfaIw lBGOzM1miiK2/5quj9/tIW1rJLJiR8LLNBpjaDAVZrJqAjJXObCY9AmtpsgiGQSY kh8YTohNcMTo6w/CVoAekoQugE6tDHAvAg7QqRVwuMrFXu71fMjUcyOd8vFrptwC 8OnOVN8qZYohdE9o9AxO8jUm2dUI8hTvijdxERW6zZy3lRNOnfpiTYozGISJofUc +E1fY8/LCtow1RzH8tlfuc+JcWfBdn4egU+r727aRMZSgu+f61xXZGTGsUuwY37Q zSGoAa2P5xodk4S4bF40XKIYYlbEbfUJP73GRFk4QQYkE5lcAK+djG4e1guU+lw2 VsWwCHK4Nl9LxNIj5a6VLrK4JegBHuY9uBGrQUDw7NcB86o7le4wh1HdM8cfBDG5 RrLe/lfyonquFOAPIasVHB5oG+FK1E+ex4DL1qfvWcmV1RRVaEvtrBF2mpidMSoI W0m6iAPN5keGhlus50xXllfmbotpgFQtcBgJQKCUaSYP/WAJT9JpHLYPOA2ADM0g 3XoBX8i6s2M= =3SCb -----END PGP SIGNATURE----- Merge tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - assorted functional fixes for hid-steam ported from SteamOS betas (Vicki Pfau) - fix for custom sensor-hub sensors (hinge angle sensor and LISS sensors) not working (Yauhen Kharuzhy) - functional fix for handling Confidence in Wacom driver (Jason Gerecke) - support for Ilitek ili2901 touchscreen (Zhengqiao Xia) - power management fix for Wacom userspace battery exporting (Tatsunosuke Tobita) - rework of wait-for-reset in order to reduce the need for I2C_HID_QUIRK_NO_IRQ_AFTER_RESET qurk; the success rate is now 50% better, but there are still further improvements to be made (Hans de Goede) - greatly improved coverage of Tablets in hid-selftests (Benjamin Tissoires) - support for Nintendo NSO controllers -- SNES, Genesis and N64 (Ryan McClelland) - support for controlling mcp2200 GPIOs (Johannes Roith) - power management improvement for EHL OOB wakeup in intel-ish (Kai-Heng Feng) - other assorted device-specific fixes and code cleanups * tag 'hid-for-linus-2024010801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (53 commits) HID: amd_sfh: Add a new interface for exporting ALS data HID: amd_sfh: Add a new interface for exporting HPD data HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int() HID: i2c-hid: elan: Add ili2901 timing dt-bindings: HID: i2c-hid: elan: Introduce Ilitek ili2901 HID: bpf: make bus_type const in struct hid_bpf_ops HID: make ishtp_cl_bus_type const HID: make hid_bus_type const HID: hid-steam: Add gamepad-only mode switched to by holding options HID: hid-steam: Better handling of serial number length HID: hid-steam: Update list of identifiers from SDL HID: hid-steam: Make client_opened a counter HID: hid-steam: Clean up locking HID: hid-steam: Disable watchdog instead of using a heartbeat HID: hid-steam: Avoid overwriting smoothing parameter HID: magicmouse: fix kerneldoc for struct magicmouse_sc HID: sensor-hub: Enable hid core report processing for all devices HID: wacom: Add additional tests of confidence behavior HID: wacom: Correct behavior when processing some confidence == false touches HID: nintendo: add support for nso controllers ... |
||
|
Linus Torvalds
|
5dfec3cf3e |
hwmon updates for v6.8
- New drivers
* pmbus: Support for MPS Multi-phase mp2856/mp2857 controller
* pmbus: Support for MPS Multi-phase mp5990
* Driver for Gigabyte AORUS Waterforce AIO coolers
|
||
|
Linus Torvalds
|
5b9b41617b |
Another moderately busy cycle for documentation, including:
- The minimum Sphinx requirement has been raised to 2.4.4, following a
warning that was added in 6.2.
- Some reworking of the Documentation/process front page to, hopefully,
make it more useful.
- Various kernel-doc tweaks to, for example, make it deal properly with
__counted_by annotations.
- We have also restored a warning for documentation of nonexistent
structure members that disappeared a while back. That had the delightful
consequence of adding some 600 warnings to the docs build. A sustained
effort by Randy, Vegard, and myself has addressed almost all of those,
bringing the documentation back into sync with the code. The fixes are
going through the appropriate maintainer trees.
- Various improvements to the HTML rendered docs, including automatic links
to Git revisions and a nice new pulldown to make translations easy to
access.
- Speaking of translations, more of those for Spanish and Chinese.
...plus the usual stream of documentation updates and typo fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmWcRKMPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YTKIH/AxBt/3iWt40dPf18arZHLU6tdUbmg01ttef
CNKWkniCmABGKc//KYDXvjZMRDt0YlrS0KgUzrb8nIQTBlZG40D+88EwjXE0HeGP
xt1Fk7OPOiJEqBZ3HEe0PDVfOiA+4yR6CmDKklCJuKg77X9atklneBwPUw/cOASk
CWj+BdbwPBiSNQv48Lp87rGusKwnH/g0MN2uS0z9MPr1DYjM1K8+ngZjGW24lZHt
qs5yhP43mlZGBF/lwNJXQp/xhnKAqJ9XwylBX9Wmaoxaz9yyzNVsADGvROMudgzi
9YB+Jdy7Z0JSrVoLIRhUuDOv7aW8vk+8qLmGJt2aTIsqehbQ6pk=
=fCtT
-----END PGP SIGNATURE-----
Merge tag 'docs-6.8' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"Another moderately busy cycle for documentation, including:
- The minimum Sphinx requirement has been raised to 2.4.4, following
a warning that was added in 6.2
- Some reworking of the Documentation/process front page to,
hopefully, make it more useful
- Various kernel-doc tweaks to, for example, make it deal properly
with __counted_by annotations
- We have also restored a warning for documentation of nonexistent
structure members that disappeared a while back. That had the
delightful consequence of adding some 600 warnings to the docs
build. A sustained effort by Randy, Vegard, and myself has
addressed almost all of those, bringing the documentation back into
sync with the code. The fixes are going through the appropriate
maintainer trees
- Various improvements to the HTML rendered docs, including automatic
links to Git revisions and a nice new pulldown to make translations
easy to access
- Speaking of translations, more of those for Spanish and Chinese
... plus the usual stream of documentation updates and typo fixes"
* tag 'docs-6.8' of git://git.lwn.net/linux: (57 commits)
MAINTAINERS: use tabs for indent of CONFIDENTIAL COMPUTING THREAT MODEL
A reworked process/index.rst
ring-buffer/Documentation: Add documentation on buffer_percent file
Translated the RISC-V architecture boot documentation.
Docs: remove mentions of fdformat from util-linux
Docs/zh_CN: Fix the meaning of DEBUG to pr_debug()
Documentation: move driver-api/dcdbas to userspace-api/
Documentation: move driver-api/isapnp to userspace-api/
Documentation/core-api : fix typo in workqueue
Documentation/trace: Fixed typos in the ftrace FLAGS section
kernel-doc: handle a void function without producing a warning
scripts/get_abi.pl: ignore some temp files
docs: kernel_abi.py: fix command injection
scripts/get_abi: fix source path leak
CREDITS, MAINTAINERS, docs/process/howto: Update man-pages' maintainer
docs: translations: add translations links when they exist
kernel-doc: Align quick help and the code
MAINTAINERS: add reviewer for Spanish translations
docs: ignore __counted_by attribute in structure definitions
scripts: kernel-doc: Clarify missing struct member description
..
|
||
|
Linus Torvalds
|
5fda5698c2 |
platform-drivers-x86 for v6.8-1
Highlights:
- Intel PMC / PMT / TPMI / uncore-freq / vsec improvements and
new platform support
- AMD PMC / PMF improvements and new platform support
- AMD ACPI based Wifi band RFI mitigation feature (WBRF)
- WMI bus driver cleanups and improvements (Armin Wolf)
- acer-wmi Predator PHN16-71 support
- New Silicom network appliance EC LEDs / GPIOs driver
The following is an automated git shortlog grouped by driver:
ACPI:
- scan: Add LNXVIDEO HID to ignore_serial_bus_ids[]
Add Silicom Platform Driver:
- Add Silicom Platform Driver
Documentation/driver-api:
- Add document about WBRF mechanism
ISST:
- Process read/write blocked feature status
Merge tag 'platform-drivers-x86-amd-wbrf-v6.8-1' into review-hans:
- Merge tag 'platform-drivers-x86-amd-wbrf-v6.8-1' into review-hans
Merge tag 'platform-drivers-x86-v6.7-3' into pdx86/for-next:
- Merge tag 'platform-drivers-x86-v6.7-3' into pdx86/for-next
Merge tag 'platform-drivers-x86-v6.7-6' into pdx86/for-next:
- Merge tag 'platform-drivers-x86-v6.7-6' into pdx86/for-next
Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS:
- Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS
acer-wmi:
- add fan speed monitoring for Predator PHN16-71
- Depend on ACPI_VIDEO instead of selecting it
- Add platform profile and mode key support for Predator PHN16-71
asus-laptop:
- remove redundant braces in if statements
asus-wmi:
- Convert to platform remove callback returning void
clk:
- x86: lpss-atom: Drop unneeded 'extern' in the header
dell-smbios-wmi:
- Stop using WMI chardev
- Use devm_get_free_pages()
hp-bioscfg:
- Removed needless asm-generic
hp-wmi:
- Convert to platform remove callback returning void
intel-uncore-freq:
- Add additional client processors
intel-wmi-sbl-fw-update:
- Use bus-based WMI interface
intel/pmc:
- Call pmc_get_low_power_modes from platform init
ips:
- Remove unused debug code
platform/mellanox:
- mlxbf-tmfifo: Remove unnecessary bool conversion
platform/x86/amd:
- Add support for AMD ACPI based Wifi band RFI mitigation feature
platform/x86/amd/pmc:
- Modify SMU message port for latest AMD platform
- Add 1Ah family series to STB support list
- Add idlemask support for 1Ah family
- call amd_pmc_get_ip_info() during driver probe
- Add VPE information for AMDI000A platform
- Send OS_HINT command for AMDI000A platform
platform/x86/amd/pmf:
- Return a status code only as a constant in two functions
- Return directly after a failed apmf_if_call() in apmf_sbios_heartbeat_notify()
- dump policy binary data
- Add capability to sideload of policy binary
- Add facility to dump TA inputs
- Make source_as_str() as non-static
- Add support to update system state
- Add support update p3t limit
- Add support to get inputs from other subsystems
- change amd_pmf_init_features() call sequence
- Add support for PMF Policy Binary
- Change return type of amd_pmf_set_dram_addr()
- Add support for PMF-TA interaction
- Add PMF TEE interface
platform/x86/dell:
- alienware-wmi: Use kasprintf()
platform/x86/intel-uncore-freq:
- Process read/write blocked feature status
platform/x86/intel/pmc:
- Add missing extern
- Add Lunar Lake M support to intel_pmc_core driver
- Add Arrow Lake S support to intel_pmc_core driver
- Add ssram_init flag in PMC discovery in Meteor Lake
- Move common code to core.c
- Add PSON residency counter for Alder Lake
- Add regmap for Tiger Lake H PCH
- Add PSON residency counter
- Fix in mtl_punit_pmt_init()
- Fix in pmc_core_ssram_get_pmc()
- Show Die C6 counter on Meteor Lake
- Add debug attribute for Die C6 counter
- Read low power mode requirements for MTL-M and MTL-P
- Retrieve LPM information using Intel PMT
- Display LPM requirements for multiple PMCs
- Find and register PMC telemetry entries
- Cleanup SSRAM discovery
- Allow pmc_core_ssram_init to fail
platform/x86/intel/pmc/arl:
- Add GBE LTR ignore during suspend
platform/x86/intel/pmc/lnl:
- Add GBE LTR ignore during suspend
platform/x86/intel/pmc/mtl:
- Use return value from pmc_core_ssram_init()
platform/x86/intel/pmt:
- telemetry: Export API to read telemetry
- Add header to struct intel_pmt_entry
platform/x86/intel/tpmi:
- Move TPMI ID definition
- Modify external interface to get read/write state
- Don't create devices for disabled features
platform/x86/intel/vsec:
- Add support for Lunar Lake M
- Add base address field
- Add intel_vsec_register
- Assign auxdev parent by argument
- Use cleanup.h
- remove platform_info from vsec device structure
- Move structures to header
- Remove unnecessary return
- Fix xa_alloc memory leak
platform/x86/intel/wmi:
- thunderbolt: Use bus-based WMI interface
silicom-platform:
- Fix spelling mistake "platfomr" -> "platform"
wmi:
- linux/wmi.h: fix Excess kernel-doc description warning
- Simplify get_subobj_info()
- Decouple ACPI notify handler from wmi_block_list
- Create WMI bus device first
- Use devres for resource handling
- Remove ACPI handlers after WMI devices
- Remove unused variable in address space handler
- Remove chardev interface
- Remove debug_event module param
- Remove debug_dump_wdg module param
- Add to_wmi_device() helper macro
- Add wmidev_block_set()
x86-android-tablets:
- Fix an IS_ERR() vs NULL check in probe
- Fix backlight ctrl for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add audio codec info for Lenovo Yoga Tab 3 Pro YT3-X90F
- Add support for SPI device instantiation
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmWb29kUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wliAf/bjJw8xGjzKYzipUhhDhM/tPdmuCs
9zXCYXSeioSDCmhQNq6E4R+aBWJvcKAq5tNyf45x6tvWJVY2hk1HVnnJeu7qyVNk
9fA7pGpqsUJg9w9nHW6YLU0AMSSl2a3k/E3lDwhDjYXwZiwQ2Y8atQ702HjiV5US
cZ8/ZblIYqv/WKmhHpBf6dGlGzOUiwnXNIVQDIhXbde7yQPt3gGisftiu6bGyYvA
FuBxm3o0UREX6yHAtII4TQfmcM45BrQa7/7FO3c0ZkpRmGCwiJJjRewUi8Rd2epJ
mP9bNGkGdPriGMdlqcVDMyWvB5XJCaZTlbHHHSyEAaCRTEqeUMKWxp8OMg==
=bmmu
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Intel PMC / PMT / TPMI / uncore-freq / vsec improvements and new
platform support
- AMD PMC / PMF improvements and new platform support
- AMD ACPI based Wifi band RFI mitigation feature (WBRF)
- WMI bus driver cleanups and improvements (Armin Wolf)
- acer-wmi Predator PHN16-71 support
- New Silicom network appliance EC LEDs / GPIOs driver
* tag 'platform-drivers-x86-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (96 commits)
platform/x86/amd/pmc: Modify SMU message port for latest AMD platform
platform/x86/amd/pmc: Add 1Ah family series to STB support list
platform/x86/amd/pmc: Add idlemask support for 1Ah family
platform/x86/amd/pmc: call amd_pmc_get_ip_info() during driver probe
platform/x86/amd/pmc: Add VPE information for AMDI000A platform
platform/x86/amd/pmc: Send OS_HINT command for AMDI000A platform
platform/x86/amd/pmf: Return a status code only as a constant in two functions
platform/x86/amd/pmf: Return directly after a failed apmf_if_call() in apmf_sbios_heartbeat_notify()
platform/x86: wmi: linux/wmi.h: fix Excess kernel-doc description warning
platform/x86/intel/pmc: Add missing extern
platform/x86/intel/pmc/lnl: Add GBE LTR ignore during suspend
platform/x86/intel/pmc/arl: Add GBE LTR ignore during suspend
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: Remove "X86 PLATFORM DRIVERS - ARCH" from MAINTAINERS
platform/x86: hp-bioscfg: Removed needless asm-generic
platform/x86/intel/pmc: Add Lunar Lake M support to intel_pmc_core driver
platform/x86/intel/pmc: Add Arrow Lake S support to intel_pmc_core driver
platform/x86/intel/pmc: Add ssram_init flag in PMC discovery in Meteor Lake
platform/x86/intel/pmc: Move common code to core.c
platform/x86/intel/pmc: Add PSON residency counter for Alder Lake
...
|
||
|
Linus Torvalds
|
3efcce4a9e |
chrome platform changes for 6.8
* Improvements - Implement quickselect for median in cros-ec-sensorhub. * Fixes - Fix an out of boundary array access in cros-ec-vbc. * Misc - Cleanups and fix typos. -----BEGIN PGP SIGNATURE----- iIkEABYIADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCZZuzzBMcdHp1bmdiaUBr ZXJuZWwub3JnAAoJECvFMQYG2jz0HWQBAOKFxGlYbiWT9iwFeImO/3LUDaamoXZn 0bJOAZA2A0VHAP9bKDytdXFtPEtSPOOa3PQoJ8/snUqVpyFzspzkxA4LCw== =E47K -----END PGP SIGNATURE----- Merge tag 'tag-chrome-platform-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Tzung-Bi Shih: - Implement quickselect for median in cros-ec-sensorhub - Fix an out of boundary array access in cros-ec-vbc - Cleanups and fix typos * tag 'tag-chrome-platform-for-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome/wilco_ec: Remove usage of the deprecated ida_simple_xx() API platform/chrome: cros_ec_vbc: Fix -Warray-bounds warnings platform/chrome: sensorhub: Implement quickselect for median calculation platform/chrome: sensorhub: Fix typos |
||
|
Linus Torvalds
|
bd012f3a5b |
ACPI updates for 6.8-rc1
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki).
- Adjust the cpufreq thermal reduction algorithm in the ACPI processor
driver for Tegra241 (Srikar Srimath Tirumala, Arnd Bergmann).
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki).
- Switch over ACPI to using a threaded interrupt handler for the
SCI (Rafael J. Wysocki).
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki).
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki).
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock to
keep local interrupts on (Rafael J. Wysocki).
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg).
- Correct and clean up the generic function for parsing ACPI data-only
tables with array structure (Yuntao Wang).
- Modify acpi_dev_uid_match() to support different types of its second
argument and adjust its users accordingly (Raag Jadav).
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki).
- Use generic ACPI helpers for evaluating trip point temperature
objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
Bergmann).
- Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
zone driver (Jeff Brasen).
- Modify the ACPI LPIT table handling code to avoid u32 multiplication
overflows in state residency computations (Nikita Kiryushin).
- Drop an unused helper function from the ACPI backlight (video) driver
and add a clarifying comment to it (Hans de Goede).
- Update the ACPI backlight driver to avoid using uninitialized memory
in some cases (Nikita Kiryushin).
- Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
Qiu).
- Add support for vendor-defined error types to the ACPI APEI error
injection code (Avadhut Naik).
- Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous memory
failure events, so they are handled differently from the asynchronous
ones (Shuai Xue).
- Fix NULL pointer dereference check in the ACPI extlog driver (Prarit
Bhargava).
- Adjust the ACPI extlog driver to clear the Extended Error Log status
when RAS_CEC handled the error (Tony Luck).
- Add IRQ override quirks for some Infinity laptops and for TongFang
GMxXGxx (David McFarland, Hans de Goede).
- Clean up the ACPI NUMA code and fix it to ensure that fake_pxm is not
the same as one of the real pxm values (Yuntao Wang).
- Fix the fractional clock divider flags in the ACPI LPSS (Intel SoC)
driver so as to prevent miscalculation of the values in the clock
divider (Andy Shevchenko).
- Adjust comments in the ACPI watchdog driver to prevent kernel-doc
from complaining during documentation builds (Randy Dunlap).
- Make the ACPI button driver send wakeup key events to user space in
addition to power button events on systems that can be woken up by
the power button (Ken Xue).
- Adjust pnpacpi_parse_allocated_vendor() to use memcpy() on a full
structure field (Dmitry Antipov).
-----BEGIN PGP SIGNATURE-----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=Ntzm
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the new features standpoint, the most significant change here is
the addition of CSI-2 and MIPI DisCo for Imaging support to the ACPI
device enumeration code that will allow MIPI cameras to be enumerated
through the platform firmware on systems using ACPI.
Also significant is the switch-over to threaded interrupt handlers for
the ACPI SCI and the dedicated EC interrupt (on systems where the
former is not used) which essentially allows all ACPI code to run with
local interrupts enabled. That should improve responsiveness
significantly on systems where multiple GPEs are enabled and the
handling of one SCI involves many I/O address space accesses which
previously had to be carried out in one go with disabled interrupts on
the local CPU.
Apart from the above, the ACPI thermal zone driver will use the
Thermal fast Sampling Period (_TFP) object if available, which should
allow temperature changes to be followed more accurately on some
systems, the ACPI Notify () handlers can run on all CPUs (not just on
CPU0), which should generally speed up the processing of events
signaled through the ACPI SCI, and the ACPI power button driver will
trigger wakeup key events via the input subsystem (on systems where it
is a system wakeup device)
In addition to that, there are the usual bunch of fixes and cleanups.
Specifics:
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki)
- Adjust the cpufreq thermal reduction algorithm in the ACPI
processor driver for Tegra241 (Srikar Srimath Tirumala, Arnd
Bergmann)
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki)
- Switch over ACPI to using a threaded interrupt handler for the SCI
(Rafael J. Wysocki)
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki)
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki)
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock
to keep local interrupts on (Rafael J. Wysocki)
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg)
- Correct and clean up the generic function for parsing ACPI
data-only tables with array structure (Yuntao Wang)
- Modify acpi_dev_uid_match() to support different types of its
second argument and adjust its users accordingly (Raag Jadav)
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki)
- Use generic ACPI helpers for evaluating trip point temperature
objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
Bergmann)
- Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
zone driver (Jeff Brasen)
- Modify the ACPI LPIT table handling code to avoid u32
multiplication overflows in state residency computations (Nikita
Kiryushin)
- Drop an unused helper function from the ACPI backlight (video)
driver and add a clarifying comment to it (Hans de Goede)
- Update the ACPI backlight driver to avoid using uninitialized
memory in some cases (Nikita Kiryushin)
- Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
Qiu)
- Add support for vendor-defined error types to the ACPI APEI error
injection code (Avadhut Naik)
- Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous
memory failure events, so they are handled differently from the
asynchronous ones (Shuai Xue)
- Fix NULL pointer dereference check in the ACPI extlog driver
(Prarit Bhargava)
- Adjust the ACPI extlog driver to clear the Extended Error Log
status when RAS_CEC handled the error (Tony Luck)
- Add IRQ override quirks for some Infinity laptops and for TongFang
GMxXGxx (David McFarland, Hans de Goede)
- Clean up the ACPI NUMA code and fix it to ensure that fake_pxm is
not the same as one of the real pxm values (Yuntao Wang)
- Fix the fractional clock divider flags in the ACPI LPSS (Intel SoC)
driver so as to prevent miscalculation of the values in the clock
divider (Andy Shevchenko)
- Adjust comments in the ACPI watchdog driver to prevent kernel-doc
from complaining during documentation builds (Randy Dunlap)
- Make the ACPI button driver send wakeup key events to user space in
addition to power button events on systems that can be woken up by
the power button (Ken Xue)
- Adjust pnpacpi_parse_allocated_vendor() to use memcpy() on a full
structure field (Dmitry Antipov)"
* tag 'acpi-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override
ACPI: button: trigger wakeup key events
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: EC: Use a spin lock without disabing interrupts
ACPI: EC: Use a threaded handler for dedicated IRQ
ACPI: OSL: Use spin locks without disabling interrupts
ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
ACPI: extlog: Clear Extended Error Log status when RAS_CEC handled the error
ACPI: LPSS: Fix the fractional clock divider flags
ACPI: NUMA: Fix the logic of getting the fake_pxm value
ACPI: NUMA: Optimize the check for the availability of node values
ACPI: NUMA: Remove unnecessary check in acpi_parse_gi_affinity()
ACPI: watchdog: fix kernel-doc warnings
ACPI: extlog: fix NULL pointer dereference check
...
|
||
|
Linus Torvalds
|
9f2a635235 |
Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in "nilfs2: Folio
conversions for file paths".
- Additional nilfs2 folio conversion from Ryusuke Konishi in "nilfs2:
Folio conversions for directory paths".
- IA64 remnant removal in Heiko Carstens's "Remove unused code after
IA-64 removal".
- Arnd Bergmann has enabled the -Wmissing-prototypes warning everywhere
in "Treewide: enable -Wmissing-prototypes". This had some followup
fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
"hexagon: Fix up instances of -Wmissing-prototypes".
- Nathan also addressed some s390 warnings in "s390: A couple of
fixes for -Wmissing-prototypes".
- Arnd Bergmann addresses the same warnings for MIPS in his series
"mips: address -Wmissing-prototypes warnings".
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series "kexec_file: Load kernel at top of
system RAM if required"
- Baoquan He has also added the self-explanatory "kexec_file: print out
debugging message if required".
- Some checkstack maintenance work from Tiezhu Yang in the series
"Modify some code about checkstack".
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is "watchdog:
Better handling of concurrent lockups".
- Yuntao Wang has contributed some maintenance work on the crash code in
"crash: Some cleanups and fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZ2R6AAKCRDdBJ7gKXxA
juCVAP4t76qUISDOSKugB/Dn5E4Nt9wvPY9PcufnmD+xoPsgkQD+JVl4+jd9+gAV
vl6wkJDiJO5JZ3FVtBtC3DFA/xHtVgk=
=kQw+
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
|
||
Jiri Kosina
|
f60c35260e |
Merge branch 'for-6.8/intel-ish' into for-linus
- power management improvement for EHL OOB wakeup in intel-ish (Kai-Heng Feng) - generic intel-ish code cleanups (Even Xu) |