mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 00:21:59 +00:00
a06c3fad49
18117 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Parth Pancholi
|
402d336053 |
arm64: dts: ti: k3-j784s4-main: Correct McASP DMAs
Correct the McASP nodes - mcasp3 and mcasp4 with the right
DMAs thread IDs as per TISCI documentation [1] for J784s4.
This fixes the related McASPs probe failure due to incorrect
DMA IDs.
Link: http://downloads.ti.com/tisci/esd/latest/5_soc_doc/j784s4/psil_cfg.html#psi-l-source-and-destination-thread-ids/ [1]
Fixes:
|
||
Jared McArthur
|
04c9068114 |
arm64: dts: ti: k3-j722s: Fix gpio-range for main_pmx0
Commit |
||
|
Jared McArthur
|
98897a3008 |
arm64: dts: ti: k3-am62p: Fix gpio-range for main_pmx0
Commit |
||
|
Jared McArthur
|
4e436f6fb9 |
arm64: dts: ti: k3-am62p: Add gpio-ranges for mcu_gpio0
Commit |
||
Francesco Dolcini
|
9438f97029 |
arm64: dts: ti: k3-am62-verdin-dahlia: Keep CTRL_SLEEP_MOCI# regulator on
This reverts commit |
||
Nishanth Menon
|
137d9e76ae |
Late fixes towards v6.11-rc1
First patch fixes warning splat seen on J784S4 due to overlapping serdes0 lane. Second patch cleans up the serdes0 references for readability -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmaVYl4QHHZpZ25lc2hy QHRpLmNvbQAKCRDERh5FfJEW48GRCAC5u0MKtI+/BZZVlqmgtL0glWYcFBUKxAFU iRTKIJAEsfR42R6vGFolujtfvb2RDLxgUFhpt8A5X5SiVWk3DC/txAMgIkaFsndu FeHCgwr6jLtZ2Cg3iiD3+/NxEHQ3GKA/CJZYJwAM8ED8UWKENA0JkTwz5H47D+OF Ijc/MyM/HNp2LbfdGN23hcK4Vw2BGZFtRJUkjWNNZcvwG6d66a/3Z/sSOlAL9rB3 a1ypEX2X71O3I7Fdp25v4ukbW8+E+pVEpXQEg8tf8fkPYuRZqUMxbWzHrPAvx6u6 RM+V7iQIxr61rwL31OWDlPnweSUv6cUQH3aADQOok16Chvt/u37N =thvO -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v6.11-part2' into ti-k3-dts-next Late fixes towards v6.11-rc1 First patch fixes warning splat seen on J784S4 due to overlapping serdes0 lane. Second patch cleans up the serdes0 references for readability Signed-off-by: Nishanth Menon <nm@ti.com> |
||
Linus Torvalds
|
ca83c61cb3 |
Kbuild updates for v6.11
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_DEBUG_INFO_BTF
and CONFIG_KALLSYMS
- Enable the warning for symbol reference to .exit.* sections by default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate base
DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
-----BEGIN PGP SIGNATURE-----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=BYu7
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
||
Zhang Bingwu
|
af7925d820 |
kbuild: Abort make on install failures
Setting '-e' flag tells shells to exit with error exit code immediately after any of commands fails, and causes make(1) to regard recipes as failed. Before this, make will still continue to succeed even after the installation failed, for example, for insufficient permission or directory does not exist. Signed-off-by: Zhang Bingwu <xtexchooser@duck.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Linus Torvalds
|
04d17331ca |
USB/Thunderbolt updates for 6.11-rc1
Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
Nothing earth-shattering in here, just constant forward progress in
adding support for new hardware and better debugging functionalities for
thunderbolt devices and the subsystem. Included in here are:
- thunderbolt debugging update and driver additions
- xhci driver updates
- typec driver updates
- kselftest device driver changes (acked by the relevant maintainers,
depended on other changes in this tree.)
- cdns3 driver updates
- gadget driver updates
- MODULE_DESCRIPTION() additions
- dwc3 driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppaNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXZwCgrEtIAQw0x6EF7w/iTWVS5UJj9AEAoLCj5UwO
WX978uThyUctuYYKbw+8
=Cm7j
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
Nothing earth-shattering in here, just constant forward progress in
adding support for new hardware and better debugging functionalities
for thunderbolt devices and the subsystem. Included in here are:
- thunderbolt debugging update and driver additions
- xhci driver updates
- typec driver updates
- kselftest device driver changes (acked by the relevant maintainers,
depended on other changes in this tree.)
- cdns3 driver updates
- gadget driver updates
- MODULE_DESCRIPTION() additions
- dwc3 driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits)
kselftest: devices: Add test to detect device error logs
kselftest: Move ksft helper module to common directory
kselftest: devices: Move discoverable devices test to subdirectory
usb: gadget: f_uac2: fix non-newline-terminated function name
USB: uas: Implement the new shutdown callback
USB: core: add 'shutdown' callback to usb_driver
usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0
usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller
usb: dwc2: add support for other Lantiq SoCs
usb: gadget: Use u16 types for 16-bit fields
usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
usb: dwc3: core: Check all ports when set phy suspend
usb: typec: tcpci: add support to set connector orientation
dt-bindings: usb: Convert fsl-usb to yaml
usb: typec: ucsi: reorder operations in ucsi_run_command()
usb: typec: ucsi: extract common code for command handling
usb: typec: ucsi: inline ucsi_read_message_in
usb: typec: ucsi: rework command execution functions
usb: typec: ucsi: split read operation
usb: typec: ucsi: simplify command sending API
...
|
||
|
Linus Torvalds
|
ebcfbf02ab |
IOMMU Updates for Linux v6.11
- Core:
* Support for the "ats-supported" device-tree property.
* Removal of the 'ops' field from 'struct iommu_fwspec'.
* Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users.
* Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem.
* Remove stale documentation.
* Add missing MODULE_DESCRIPTION() macro.
* Misc cleanups.
- Allwinner Sun50i:
* Ensure bypass mode is disabled on H616 SoCs.
* Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker.
* Add new device-tree compatible strings.
- AMD Vi:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
- Arm SMMUv2:
* Print much more useful information on context faults.
* Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n.
* Add new Qualcomm device-tree bindings.
- Arm SMMUv3:
* Support for hardware update of access/dirty bits and reporting via
IOMMUFD.
* More driver rework from Jason, this time updating the PASID/SVA support
to prepare for full IOMMUFD support.
* Add missing MODULE_DESCRIPTION() macro.
* Minor fixes and cleanups.
- NVIDIA Tegra:
* Fix for benign fwspec initialisation issue exposed by rework on the
core branch.
- Intel VT-d:
* Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
* Use READ_ONCE() to read volatile descriptor status.
* Remove support for handling Execute-Requested requests.
* Avoid calling iommu_domain_alloc().
* Minor fixes and refactoring.
- Qualcomm MSM:
* Updates to the device-tree bindings.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaZTqMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNApdB/wL2gW7ANJN3KDrOiWdq06P9fuzxbuiAegI
aKGH+aT05kJjLBXpAE5K9Bas0RbgN8iIB4TITDR9jyLnMOlTP3poy0fvB8y27q00
/WkQ7yVPkZc58ySdEOGH/EbuQkiXcD1YTjTGWP9071xzbWTDbsYN0smfbvvB9LgI
56KhdcUtB0QsqhqBzyyznHJLFdpVvDpbkiAFDXJfor7SNOOtV9a4Ect6IYteaYKz
S6+DWDEfUs+fHTEKEZ9sZVA745f2zPkT/YHY8vjLOEukWN07+3/2AKTra19DIgqF
HCGitRyZjOut1fg8sLn0SUliCKe/G/bHlwSbHnxJQ73b91YDvpzD
=xvLD
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
|
||
|
Linus Torvalds
|
51835949dd |
Networking changes for 6.11. Not much excitement - a handful of large
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
||
|
Linus Torvalds
|
e3950967f6 |
soc: dt updates for 6.11
The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to
the MT7981 Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv
boards and eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops
based on the Qualcomm x1e80100 (Snapdragon X1 Elite) chip,
the Asus Vivobook S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices
from Samsung, Motorola and LG, as well as a wireless router
and some reference designs
- Six NXP i.MX based machines, mostly industrial boards along
with some reference designs
- Mediatek sees some interesting Filogic based routers
including the "OpenWRT One", a few new Chromebooks as
well as single-board computers.
- Four machines from Solidrun based on Marvell cn913x,
replacing the older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board
computers including some interesting ones based on the
rk3588 chip like the ROCK 5 ITX board and the CM3588
with its four NVMe slots
- The RISC-V boards are all single-board computers based on
Starfive JH7110, Microchip MPFS and Allwinner D1, which all
had similar boards already
There are also a lot of updates to already supported machines,
notably for the TI K3, Rockchips, Freescale and of course
Qualcomm platforms.
-----BEGIN PGP SIGNATURE-----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=xGqj
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
|
||
|
Linus Torvalds
|
cc0f7c3f97 |
soc: driver updates for 6.11
The updates to the mediatek, allwinner, ti, tegra, microchip, stm32, samsung, imx, zynq and amlogic platoforms are farily small maintenance changes, either addressing minor mistakes or enabling additional hardware. The qualcomm platform changes add a number of features and are larger than the other ones combined, introducing the use of linux/cleanup.h across several drivers, adding support for Snapdragon X1E and other SoCs in platform drivers, a new "protection domain mapper" driver, and a "shared memory bridge" driver. The cznic "turris omnia" router based on Marvell Armada gets a platform driver that talks to the board specific microcontroller. The reset and cache subsystems get a few minor updates to SoC specific drivers, while the ff-a, scmi and optee firmware drivers get some code refactoring and new features. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVTTUACgkQYKtH/8kJ UiegixAAqGfwUtwk2GGZJlEGjUjT4cqrwCTLhNlaNfgN/dZxjk1XBTKvtp2mVDi2 lJN8TNqa0Csw8XZYPgHi0s1ppmwQl07Unpbc9tUeS4tAeIuputDe+ia0UtQx3Mkd GTAKJO6VzLeCnDxB4757OURZO9wYlPdZycQbnSKDyfBIapFuZwozmbAc7BuFGvBv 2Zt5lca531EJuM5wg25f+F/8XSxZIqjMA6/PTGNCYig1bx5AM2tCWK2xN+BL+dxn YVLuRZT7lSgpwivg9OHzJ49g9WeJB7RArnSDg1Ac7sNfC8476UC17BAH4rF7QSTP q2GBP2VOdRJA9mJkavtLhE/1LPDJuYTM+nt1xq7jzG2MKN7yLjX0LMrMgKsk0pXZ T2qQh7+4MA9lwlpGEwDruMajTJahbMgiAUcSivLsr18LrifAnKVHBDTRmRwNiRX2 T3/zk90kenJX1NOkc4SrdLd5iCyq0oSN+fukdh3UMgJLnAzaWOe5mKAMF7eefeog rMH276W8JwbbmIC4R2aQm6TL7IWBtaCaHuLqYOiTjooir31OgwW4Mztd7okU4v4I rOGhV0zJTSVXT+a4O2jOooWppS9xE45/F2DSigSvZjEiahZ0L4feaOrHui5PVVlW wmFmobCq6Y0Mjspdk64O1tbUWJ17CmRK1WDrUUk0VgmLy9gn6A8= =ChcR -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "The updates to the mediatek, allwinner, ti, tegra, microchip, stm32, samsung, imx, zynq and amlogic platoforms are fairly small maintenance changes, either addressing minor mistakes or enabling additional hardware. The qualcomm platform changes add a number of features and are larger than the other ones combined, introducing the use of linux/cleanup.h across several drivers, adding support for Snapdragon X1E and other SoCs in platform drivers, a new "protection domain mapper" driver, and a "shared memory bridge" driver. The cznic "turris omnia" router based on Marvell Armada gets a platform driver that talks to the board specific microcontroller. The reset and cache subsystems get a few minor updates to SoC specific drivers, while the ff-a, scmi and optee firmware drivers get some code refactoring and new features" * tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits) firmware: turris-mox-rwtm: Initialize completion before mailbox firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout() firmware: turris-mox-rwtm: Do not complete if there are no waiters MAINTAINERS: drop riscv list from cache controllers platform: cznic: turris-omnia-mcu: fix Kconfig dependencies bus: sunxi-rsb: Constify struct regmap_bus soc: sunxi: sram: Constify struct regmap_config platform: cznic: turris-omnia-mcu: Depend on WATCHDOG platform: cznic: turris-omnia-mcu: Depend on OF soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers arm64: stm32: enable scmi regulator for stm32 firmware: qcom: tzmem: blacklist more platforms for SHM Bridge soc: qcom: wcnss: simplify with cleanup.h soc: qcom: pdr: simplify with cleanup.h soc: qcom: ocmem: simplify with cleanup.h soc: qcom: mdt_loader: simplify with cleanup.h soc: qcom: llcc: simplify with cleanup.h firmware: qcom: tzmem: simplify returning pointer without cleanup soc: qcom: socinfo: Add PM6350 PMIC arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS ... |
||
Jakub Kicinski
|
e5abd12f3d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c |
||
Andrew Halaney
|
cc5049007d |
arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references
Subnodes were added to serdes0 in two different spots (due to independent development of their consumer usage). Let's go ahead and combine those into one reference for readability's sake. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20240710-k3-j784s4-evm-serdes0-cleanup-v1-2-03850fe33922@redhat.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Andrew Halaney
|
84f78178b6 |
arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1
Currently PCIe1 is setup to use SERDES0 lanes 0 thru 3, and USB0 is
setup to use SERDES0 lane 3 as well.
This overlap in lanes causes the following reset related lane splat:
[ 4.846266] WARNING: CPU: 4 PID: 308 at drivers/reset/core.c:792 __reset_control_get_internal+0x128/0x160
...
[ 4.846405] Call trace:
[ 4.846407] __reset_control_get_internal+0x128/0x160
[ 4.846413] __of_reset_control_get+0x4e0/0x528
[ 4.846418] of_reset_control_array_get+0xa4/0x1f8
[ 4.846423] cdns_torrent_phy_probe+0xbc8/0x1068 [phy_cadence_torrent]
[ 4.846445] platform_probe+0xb4/0xe8
...
[ 4.846577] cdns-torrent-phy 5060000.serdes: phy@0: failed to get reset
Let's limit the PCIe1 SERDES0 lanes to 0 and 1 to avoid overlap here.
This works since PCIe1 operates in x2 mode and doesn't need 4 SERDES0
lanes.
Fixes:
|
||
Arnd Bergmann
|
48d2245586 |
Allwinner SoC device tree changes for 6.11 part 2
One additional peripheral enabled for the H616. - H616 crypto engine added -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmaOvwcOHHdlbnNAY3Np ZS5vcmcACgkQOJpUIZwPJDCRuxAApCCnXFDAo5Itnkbq0dJLx9apL8spyjsIIys3 VkpMKWrexc2TOhxvxN6yf9JnqZp4LnyaleTYhdAjN3xE/gNr9bLTuSaMTnjifmzO bT2E392LwTMeNNd+5SO/PnvumbsVfATL44OIa510qzI/KSBO1cDZFHPuxV7wTVpk SLfAXVLmvcdJDRN4Zye9y0gzHgNnUwmGkoXTMROEXI2om7Q/hz5Ag2GgxVslTz7o KlPOsl4F3dCLguXDQZhamU4UA1pLEwIo6fVyn5XuR0gtNhr8g+i0qb1y4VziMKdp BwjaUjzjgmoeYwDXQnGwIQ1tKpQ5z6B27VRHxSq1LN1ErUA23tLGx+QbFFtda8je KdxElNP/uRerArk0vmZKkeklAu3i4+HpSv212IUKPWYbGvsZd4ji10heX6Rgc57V ei12/0jJRb91h4jMNoSFoN9lPW/kV8hhM67pLLj9iJIG/771Kx6jK8RxXKi/aIQP zanrlMhL97uccoQ9L37m2DDwE9aYSw7WLlFaf7PWJO6yhmzzdFWydjl5YGobpp/v x1jk7eW0ThSzPpRLnC8VfcOTpabMLOSKFltW3P5KNhipRHxcDvtBOPX/8H0YA4NF gEtWI5eLdsY3z4h8KXv8eTrfKkQOIEd50eUVpnw3JVwLPCCl8gKQWvE28PFV1WUk bk0kj54= =VCQ5 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaO7aYACgkQYKtH/8kJ Uie/dA//Szb10kTv1oGM8FxU0hjiHW5ehQ64zH92VCva93ypt9rej1nlN9Wb9F9p BRNBOIGl4PUeM3wgWNfFjzMOQcwsKwhp6blRxdsxaTKhmYCYrOJL/IO92hOuKr6L Vcyi/0ZOrNkHdOT79KAPmrFaAE4z83f95wUM68vbnF05EJ5tKYN0/QjgyFhoAZJT P3udsxArFYxInTZ6A1rtPn6Oirxiw2BYfgmo/LgkkA4du7amk2hfLMg2A2Z/xCXf 74OH8tWGmMAlp05yxd+mveUsU5pjBF1AnBOMj779DcsfhCmj/eHZR5mDrPpp4cfC lNBF7tx5JoeHRFhcIIYW1AeWkU9fSKjoo7o3l6DR9bolC+uAJoZs+3nQGyc6ux7S xmQgW8cN6sdKD0y7PFJyO+QPZcAjFM5LTbDtcRBuTVZNrQIb3SmY1DkzAY1QwZW5 pt7mqOz4odWFeB/E2p93fAuRQZrChJ4+DYSkrqwhRN8PBK1ndMIyEgB7OPqqFMUG 5xPEURY4ATFTYVteS+sqWn1HlYoc2RzKLsY1w9vvy8X0A4nFnnauW/OhPmfwvyel 3Wbt0PqdZqUPWvD5WJ3ST44Q4O0KUFLlw3whPZYv1kcfw861YdOYoRUMCvQ9i4kG 0NCJa4adS+jj63RsPcoy7MZAxsaZx+HWLVM9ukPOC1UO9vPjtCk= =4XS5 -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner SoC device tree changes for 6.11 part 2 One additional peripheral enabled for the H616. - H616 crypto engine added * tag 'sunxi-dt-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h616: add crypto engine node Link: https://lore.kernel.org/r/Zo7O73Afx7lZcBRi@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Andre Przywara
|
6ed9a85f1c |
arm64: dts: allwinner: h616: add crypto engine node
The Allwinner H616 SoC contains a crypto engine very similar to the H6 version, but with all base addresses in the DMA descriptors shifted by two bits. This requires a new compatible string. Also the H616 CE relies on the internal osciallator for the TRNG operation, so we need to reference this clock. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20240624232110.9817-5-andre.przywara@arm.com [wens@csie.org: fix up register range size] Signed-off-by: Chen-Yu Tsai <wens@csie.org> |
||
|
Arnd Bergmann
|
28323a7561 |
A few more Arm64 DeviceTree updates for v6.11
This introduces support for Lenovo Thinkpad Yoga slim 7x, LG Leon LTE, and LG K10 (K420n). In addition to this, all Gen-1 platforms gets the DWC3 quirk to disable "SuperSpeed in park mode", which resolves an instabliity issue seen in host mode. For Fairphone 4, PM6150L and PMK8003 thermal sensors are added and thermal zones defined. Two fastrpc contexts on SM6350 are marked as non-secure, to allow non-secure usage. The video clock controller on SM8150 is introduced. IPQ9574 GCC is marked as a interconnect provider. The vibrator block in the PM6150 is described. On SC7280 the download mode register is defined for SCM, allowing it to enable/disable the ramdump support during a system crash. Lastly, add a mailmap entry for Luca Weiss. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmaNjqMVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FdNwP/jMB1vTGZcaYwVGVEYIkUeuuflSr xdrUShN0EzNlB7XPo2yRZakAY4ndINQssC89Z4WYvMMytf+2qWQgGNrAbWme/Nmo /0r7Mqly2ueSN+fCG2s80HQRuuwjhM7KJ1WZ1PN46FNYOqis1eTchzv7Mi9biDgY 4HaVqqwNd6T6VZgIJJqV059XpmFw1RSKJdBjVD1ggn/7MMk2ueeY66iIJqSQC9KF zjqo5pXfwlpHJWUMATNEzfUQwqJ2vD/uR36I7qUVNq7WLZKeWjhp8pYERw1jLt76 93wwMlTXV3vX0yin0ZviQyv+YcxNmTF6V99TZiEs8kSsQ47HgwpTVvdq5dGuKVIg lfe+pfrltIoJn11wmz5hFFcRRvsLzDFOs5dY8kis3i+7nTzRE57gdM5YL4H+Z1VU VA0Z0NImSC+l6PwOZ+QW5v78xRrdDZplj0MpKNvcNERnTXipTcp65oqZY3E+GAro LrYAlLI3oAlNAKYSDk3YBRDami3WrjGy8BZwxKE/VXb0ZcEPCQKMt/17njwLBrqj rslU5tlyeuSxebg08mSIML6N1xOOndO6Ny0FDmqsNf1MiMxPQ+0Cw22P71bnb+8W VPhLmmq1YOAWPH6WKq1Ng4wId7J9GcwMOkvZZsFuwNx35RNLHhKH1Or961K0+vdI /qKRNZjWFV6h7yBC =Qc/t -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaNqgkACgkQYKtH/8kJ UicSKxAAkXAizZjc3PBOQMPH6AwkawwRR7hZDSS5lPLk42cjC5OiWP26q+guulJj SH6CYr9xftVshW9oSTlvEiI+pOp7lygaBNU76BPWmj9/cbS1pJPVBFz3BVdgCCZF 7Zxy7J1d01yIOtDTc+gpAsozWwRLN+frGgg5SJYPKt6sgnTtk4VaulW1rpvHXDJv xdkSlcc34AidKODZ1rCCXrCM5Pi/lxRw8rmj4foSSEW+BZtaCSFT8SbsQ0F3XezS xeIan3vN7uZydazKhefIrQlJfNiZ3gvYFsYYS//lCcGY7fim3pVwfHPnEq0MkPI3 b7YiqpGaLxUKg5pjqobo6ChvTISggbdS38gP/814IzusKIYE6xO4Ff5rEtBNtUMV uzS1ZLok82EOYFtL9DBz3BHdAHOGqKoU5+qW823Th+XTfKJNLxkPRZhM+JB6ChPl wJZDXc1YQdMrhjaP4MCZJL09b/pCfKh0ue8XJo9H7/7FtqSp6ACjvif47Rd36Yri wFBl/EB2qouY6hhsWASE4Ag+P5+DgtBnpybFv88O9dVx7STb5xXNzO45i+9BEDES HsAj+xHsNcMOW+YHhgHHZySYTYpFhvaO8AU4R6ZYgDi6Jg2VidBpvofgdzXslsKb e+kDNOEy4I20ci/it05lJjX2D2oxlT37ooC1aZskuUCa0vCiYzs= =naka -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt A few more Arm64 DeviceTree updates for v6.11 This introduces support for Lenovo Thinkpad Yoga slim 7x, LG Leon LTE, and LG K10 (K420n). In addition to this, all Gen-1 platforms gets the DWC3 quirk to disable "SuperSpeed in park mode", which resolves an instabliity issue seen in host mode. For Fairphone 4, PM6150L and PMK8003 thermal sensors are added and thermal zones defined. Two fastrpc contexts on SM6350 are marked as non-secure, to allow non-secure usage. The video clock controller on SM8150 is introduced. IPQ9574 GCC is marked as a interconnect provider. The vibrator block in the PM6150 is described. On SC7280 the download mode register is defined for SCM, allowing it to enable/disable the ramdump support during a system crash. Lastly, add a mailmap entry for Luca Weiss. * tag 'qcom-arm64-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits) mailmap: Update Luca Weiss's email address arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE arm64: dts: qcom: msm8916-lg-m216: Add initial device tree dt-bindings: arm: qcom: Add msm8916 based LG devices arm64: dts: qcom: ipq9574: Add icc provider ability to gcc dt-bindings: interconnect: Add Qualcomm IPQ9574 support arm64: dts: qcom: sm8150: Add video clock controller node arm64: dts: qcom: pm6150: Add vibrator arm64: dts: qcom: sc7280: Enable download mode register write arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermals arm64: dts: qcom: sm7225-fairphone-fp4: Add PMK8003 thermals arm64: dts: qcom: sm6350: Add missing qcom,non-secure-domain property arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USB arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USB arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USB ... Link: https://lore.kernel.org/r/20240709193406.3966-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
ad828298af |
Three new boards, some improvements for the Lunzn Fastrhino R6xS boards,
allowing dma on uarts connected to bluetooth modules and an update for the gpu operating points on rk356x. As well as some minor fixes for missing power-dmains and ethernet phy binding adherence. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmaMZvcQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgaSfCAC1TuxdQmBvHYAn1aLdGLYpU6u1ezvPynGg eR9dyiQZPiDAyHMCuZl5E8shIb+hnGJtvPP2+sleb1YVEK+FHNPKYu7ZD36Z3aHW I1YVSVFq6r/dq5LPBxhAs4It6mTQ9sBrEOHFluSuR/Ny/ERsxBBh2QdG6q0f6vlF lwWTxvQtGpFMgvf+UVeNTmjEbA//Xnvi/BP4NyrQkfNAfeTHav1JlpEVbuKRt+2R WpFk/RviET9MuclNbGBlq8U1ggPxWch/o8f6Qz1R7wVymgiHihJwFIFk0eAFKyKd rTdf+H01KrDWkasAEsaWYG/4bWId+lppKVA0YUlk3sPRuiewAKl8 =VcOx -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaM+WAACgkQYKtH/8kJ UieAtg/+MinvUFuYNrsiUTsxnaMN0Z32nKM//WQ6pU8Rr4qK6X1Fa8WKkrB/sa2+ fqERdYTq6EX9U/zT3way9iuLkvLs4/tOnMGOOP0yKg5qMx3lYfAQ/r3ZfLnvurp4 +x/ErGfW63ZMSl95iq8+hM0tYK4lr+xl11zg7SCbC0zVeFn42wL70o3bNbSnW/cV qZRMER6mDymqhZ9Bf1tM7PDhzC9JhlYH3ZLi1ovAOZlMZpcOVBUraTxupkAAvKJW wp7WsA64PJ3uPyNVbQZG27kRgG9Qu5zjI8a1f065l20GAhoviZmgO7Ygy3gkXhi/ aSiKG31VIrXPb/bKhXlhbhKUPigAo3aJQ8teNochniTxSXoQxeLXeoopnHe2znG1 AYhlpaU+wecu3oGq9cI5rHBQ2I0glQYXbmTV9+CCJJoGxyr+kk6OmBBMbplbGltK YCG6kNpnPbPJNAHyZesJNVfclKcJrKI/nepu56N0gFNkMQUWFgDFOLaHMdm/9zvm GJO/OmB1p/uOL42TctQ3D5JoyyiohjB+aUWViujMPeFGjOvROLDhCllQSNE5gDK2 BpTKFdsyE69zy48BvZYIVg46bXa3iIn47d1et54Ze/kqhh6XYZ0RKNfr8m28ASSx CEwABBj7UX5xwAA60pIdnHapyZx+KTNRg6eEs/ChTsao3EkC82k= =lz4I -----END PGP SIGNATURE----- Merge tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt These are two additional boards, the Xunlong Orange Pi 3B and the Add Radxa ROCK 3B. * tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add Xunlong Orange Pi 3B dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B arm64: dts: rockchip: Add Radxa ROCK 3B dt-bindings: arm: rockchip: Add Radxa ROCK 3B Link: https://lore.kernel.org/r/2191200.GUh0CODmnK@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Jonas Karlman
|
d79d713d60 |
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
The Xunlong Orange Pi 3B is a single-board computer based on the Rockchip RK3566 SoC. Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240626230319.1425316-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Jonas Karlman
|
846ef7748f |
arm64: dts: rockchip: Add Radxa ROCK 3B
The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community version based on the RK3568 SoC and an industrial version based on the RK3568J SoC. Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20240627211737.1985549-3-jonas@kwiboo.se Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Arnd Bergmann
|
6355edbb3d |
One new board, the pretty interesting Rock 5 ITX, some improvements
for the Lunzn Fastrhino R6xS boards, allowing dma on uarts connected to bluetooth modules and an update for the gpu operating points on rk356x. As well as some minor fixes for missing power-dmains and ethernet phy binding adherence. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmaL+iUQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgbyuB/9Uwa5aie3zf/KRuXdb19UAigKxt1HWxU0f z7hHyFEZoLpByFsE1H0MtKiGdIkuIrwACoPU0bRLFoPOGpvT3ZbiO5vYmjOe/pmb U2jYKR42TOKbWtAW8jlB+OCKnltVgDyUzetersRpLBFT6ukGK5asEapfcSer3p6u NFM/92wNDgf3KU8oY4cxZlXs11p3kRXSU+TV38qYCxGVo9hzZASPqsCCAwBgMK9N v6bPdZBkv0n/iANPZQcM4lrn0p28gbkDuHrgX9gnd/megh0F4XPxmVdZaM8umdmv /O+woP0/9q4ZY4/+qNRYnZOVL84Gi/QWg52Iu7npYQ7509p7PK05 =LRjK -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaMCg4ACgkQYKtH/8kJ UiexpQ//WMMP4xLj8Nv/MRNxvT8XM2k0ExgrshuRQ2JoDv4sXkDvt7/MKTFRzs+G 4vDmk+kdmgEcBOnV/ZtRu2e4ECZOpfVytOAINqUHYIlkvOFrERAoa8qQ+GWonRMx v+dQubDDin79OJzaNyipL5CIR9Ux8Xw0T800IP6ppgLa6Cpy853haD0/XxxFvtb3 YHYhwx9qwcNKGCCpl77VrPIj7HIoMp/43M3XOVq6cFSyJ1X24fOVDIxSs5w2Oadd YyOxeiyNvqYqRNMJ6UWcHX/87HyXXvx/mh7vxzelG7XdOVSzzTPkGY8KnDKpvQRZ mvQzo1XGuC7a7o4LF+5Cfmq1uxvf19IFHISoMc78KpINXbTQeeDKaz7oJ33kej0K h3Y4YyITKwTYQV2XuZIU4HfVpeQzRpeRWSmuq+fc4J16G35S5wqYVfC4u94JSzcR NJ1XKWTHpdqEGPlLoVCiTOr+mqTEsPgpb1jNJJmBPxXUX9msKauWWHB9zotYNtNr wat3l8fqwhmG9o0hKH4ijs7eWLFI41v9lMxzqliqggXlXjS/cY6/7Oa5dmLKqTHr /YOLB/sIMO/0vkq176RRlufzZMpjlw2K1rMGtfhc/Erq+0rURKqG64D/BjYKY04k JMNDCVnlY0cRXcx8FNEok9Dswe8W/g0YkBeIT2c8WA5gCLeGnWM= =A0a5 -----END PGP SIGNATURE----- Merge tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt One new board, the pretty interesting Rock 5 ITX, some improvements for the Lunzn Fastrhino R6xS boards, allowing dma on uarts connected to bluetooth modules and an update for the gpu operating points on rk356x. As well as some minor fixes for missing power-dmains and ethernet phy binding adherence. * tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add ROCK 5 ITX board dt-bindings: arm: rockchip: Add ROCK 5 ITX board arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices arm64: dts: rockchip: Add avdd supplies to hdmi on rock64 arm64: dts: rockchip: fixes PHY reset for Lunzn Fastrhino R68S arm64: dts: rockchip: disable display subsystem for Lunzn Fastrhino R6xS arm64: dts: rockchip: remove unused usb2 nodes for Lunzn Fastrhino R6xS arm64: dts: rockchip: fix pmu_io supply for Lunzn Fastrhino R6xS arm64: dts: rockchip: fix usb regulator for Lunzn Fastrhino R6xS arm64: dts: rockchip: fix regulator name for Lunzn Fastrhino R6xS arm64: dts: rockchip: Add dma-names to uart1 on quartz64-b arm64: dts: rockchip: Update GPU OPP voltages in RK356x SoC dtsi arm64: dts: rockchip: Add GPU OPP voltage ranges to RK356x SoC dtsi arm64: dts: rockchip: Drop ethernet-phy-ieee802.3-c22 from PHY compatible string on all RK3588 boards arm64: dts: rockchip: Add missing power-domains for rk356x vop_mmu Link: https://lore.kernel.org/r/1998182.CrzyxZ31qj@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
2d61b9303c |
Qualcomm Arm64 DeviceTree updates for v6.11
This introduces 11 new boards, namely: * ASUS Vivobook S 15 * Lenovo Smart Tab M10 DTS * Motorola Moto E 2015 LTE (surnia) * Motorola Moto G 2015 (osprey) * Motorola Moto G4 Play (harpia) * Qualcomm AIM300 AIoT development board * Qualcomm SM8650 Hardware Development Kit (HDK) * SHIFTphone 8 * Samsung Galaxy Z Fold5 * Schneider HMIBSC board DTS * TP-Link Archer AX55 v1 Of particular interest here is the Asus Vivobook, the first supported X1 Elite consumer laptop. For IPQ6018 an SDHCI controller is added and on IPQ9574 an MDIO bus is described. The improvements to MSM8916-based devices continues, with sound and mdoem support added to Acer Iconia Talk S and GPLUS FL8005A, the latter also gaining BMS support. Samsung Galaxy devices gains PMIC and charger definitions, NFC support and MUIC. Accelerometer and magnetometer support is added to the Samsung Galaxy Grand Prime devices. On MSM8976 definitions for IOMMU, the display subsystem, wifi subsystem, and Adreno GPU are added. On MSM8996 UFS core clock frequencies are specified, FastRPC nodes are added for the audio DSP, glink-edges are described where available, the display subsystem reset is added. Venus is introduced on MSM8998 and the "No MSA Ready" quirk is added to allow ath10k to come up. GPU support is added to QCM2290 and enabled on the RB1 development board. The I2C controller used for communicating with the LT9611UXC HDMI bridge is temporarily replaced with i2c-gpio while issues with the builtin controller is diagnosed. The same is done for RB2, on the QRB4210 platform. On RB2 TCPM max current draw is corrected and the vreg_l9a regulator is marked as always on to match expectations. On the QDU1000 platform, USB is added, secure QFPROM is introduced to allow LLCC to access OTP data. USB is enabled on the two IDP boards. SA8775p gains PCIe endpoint definitions, LLCCC support, IMEM and PIL info regions. Nodes are marked as dma-coherent as needed, a dedicated carveout for shared memory bridge allocations is introduced. The SA8775P ride device is split in the two versions r2 and r3. The SC7180 Trogdor clamshell/detachable fragments are refactored for convenience, and pwmleds are disabled where unused. On SC7280 the APR nodes for interfacing with the audio services in audio DSP firmware are introduced. The Qualcomm SMMU TBUs are described, to enable improved debug support. QoS clocks are added to interconnects, as needed in order to operate the QoS settings on some buses. SuperSpeed in park is disabled for the primary DWC3 instance to address host controller issues under load. The PM8008 (camera PMIC) is introduced in Fairphone 5, regulators are named for better output, and firmware name for IPA is adjusted to the preferred file format. The HDMI bridge on Rb3gen2 is described, rtc, gpi-dma and qup nodes are enabled. The Type-C port manager found in PM7250b is enabled, for targets not using pmic-glink firmware for Type-C management. SC8180X gets a number of smaller corrections, and some cleanups - related to both functional issues and DeviceTree validation. The PSHOLD node is marked reserved, after reports that this causes issues during shutdown. Description of the USB signals are updated to match the signal path. The PM8008 camera PMIC is added to Lenovo ThinkPad X13s. The PM660 PMIC is extended with charger and rradc definitions, and the SDM670 gains a SMEM region definition. On SDM845 the Qualcomm SMMU TBU nodes are described, to enable improved debug output during faults etc. The UFS PHY is associated with its GDSC, and the DisplayPort controller is wired up to the QMP PHY. The Lenovo Yoga C630 Embedded Controller is introduced, adding battery and Type-C port management and altmode support. The C630 also gains WiFI calibration variant information, to cause selection of the right data. The missing IPA firmware path is corrected. For the SDX75 platform, AOSS, IPCC, SDHCI, TCSR, modem SMP2P, I2C and SPI nodes are introduced. SD-card support is added to the IDP board. CPUfreq support is introduced for the SM4450 platform. Missing reset is added to the SDHC controller of SM6115. The UFS PHY is associated with its GDSC, so is the PHY on SM6350. On Fairphone 4, the camera pmic (PM8008) is introduced, regulators are named for more informative debug output, and USB role switching is enabled. On the Fairphone 3, vibrator support is added and enabled. On SM8250, the USB signal paths are properly described in the OF graph, the UFS PHY gains its required power-domains description. Thanks to the introduction of PCI power sequence support, the QRB5165 RB5 WiFi chip can now be powered up, so this is added. Touchscreen interrupt flags are corrected accross a number of Sony Xperia devices, to remove the unexpected traces from downstream. On SM8450 an OPP-table is introduced for the PCIe controllers, to specify the bandwidth and performance state requirements for the different genrations and link widths. For this the PCIe controllers also gains interconnect path definitions. The LLCC register layout is corrected, and the UFS PHY is associated with its GDSC. On the SM8550 development boards speaker port mapping is added. WiFi support is finally enabled on the QRD board. The new AIM300 development platform/board is introduced. For SM8650 video and camera clock controller are introduced. SCM node gains details necessary to trigger USB ramdump (download mode) upon a system crash. WiFi support and speaker port mapping is added to the QRD and the newly introduced HDK. On the MTP the USB Type-C connector is describe to be routed to the PHY. In addition to the base HDK, a Display Card overlay is also introduced. For X1 Elite bwmon, fastrpc and GPU support, tsens, and the missing PCIe 6a instance are added. Thermal zones are described. Pmic-glink is introduced for both CRD and QCP devices, and remaining PMICs are described. Audio support is also added to the QCP. An explicit, larger, chunk of CMA memory is added to the various devices, in order to compensate for the lack of IOMMU for PCIe. Across a wide range of platforms, the thermal zone polling delays are removed as supplies are interrupt driven anyways. Also thermal related is the introduction of GPU thermal throttling, across many SoCs. The old SMSM implementation is finally transitioned to using the mailbox-based description and implementation for invoking interrupts on remote processors. As such interrupt-triggering is converted to use this mechanism on related platforms. The usb-role-switch property is removed for all USB instances hard coded to either host or peripheral across a range of boards. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmaJfz0VHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FxOMQALOlJsncvYy+WBZ+ganw3VTY43x+ CYtmM+cvy/oEEmqLLKWO63XyPtiDuhwjjmjO9H7019Zhi7dB2odXfr8PH4Wz315G /nW99uEoR1kgdHtMwMhBv+gMSf00c6D5X3fbFxVbt2lqlaB9blZeqbA/PsAcC2Dr FId/ji6/cMdEmC1qbWtvBMSc9Cku7WNt/90qe9q5KuwKbRVF/FKPj+lfBxGnrjQ8 vaKHmqVOYSV+cfuWqA/HrIe3WUds9eXv/F+O2nx22BTqEiBmlOxVR63LwQGFV9D+ fOpRaIR30TxBk+DK/i4jnNu7UEA9lPf//0RDiKeyySAffLfQWBpURGcRUrF6X+yz 7qdi8Ep/L1v7M+FKdPdCDooVxM91JHErPB65+/T/gLbI2Oe7MZED+hY/3UcTY8cr SkSH+3VeZk8M4DDFuVdgXcTBk1d/d1zqaKKokm9IkIqdAspDYJNvlOHMfgg1bsQe Ny9epqR+RR5wFulJ0W0YWGibOYkcubduAytvtad1lawmSTCmMI8SZb8K9n1l2RI3 vYEgaSfOo0SHprgZlpULc+LqPF9n9W2RrME8iFIqpfsZ9ovFccr3QgNbHdtVZyoN t0DhAUk5UKEM4iQ4vf/7+T2WjFA2LMAg1Bznv8X4L69BVkAH/VwRudbwQe429Yqm psehVa9nc/+upil7 =Hsda -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL+k8ACgkQYKtH/8kJ UiffeBAAlBRO7Pp8MCFco+63SXZQTGJ0UXmmrkWLiXW6iCGDuUrllCLuygOGZx8O FVQ9dBQ5AXQbOy++LTYvHIzWt3pCJSIlnbhiv9Na04IgBFnZ3Uy+e+Iikq25o51M gC2lIvLfwDaTVe8KMvLdNoTUN7jWFv6dZerNo35K6mLxf5nwU6bucljM2Vn0naSK 6G4HMXA+ByvCMgSVOp4/5Qd3+XadH8604W+48n6aRM9YtLhTgV2bRRNY23y8hiAI IItgCMjzS30mbd6yrnXJOix0IoNhe9IxNKoKh8P0+G0CvAzH8s7KcVAlU+tiTsnR 0vMKYcYPK6PW8T4umHSvTTEG3HR+uvC5vyWAnCKvlx2OElD80JoVp/IWvmy4n9Fv U3hltgntDkn8raupGgQ9oeM6EoVR6fq5UtzuaZgkElWyuSigVK9jOsG8hrqf1gdo w7I6APX4c1D8ArEvCbBUmff0hy4LqnScwz+7evFwZORMDYiYxhy2ybRZVYGknozA miEkVGZr+MHLCszF8kzetHOFhhddqvTWx6IEh/5SMPTkqnGfaOTc667rJ/hfHt8/ 8AYw3dfpKrXsf3KxeNVlVpJDNexZU3yHK2glNEpr0yvXAuYYXfmXhhNo2DHNDzyg VHd6J24UoWMpQisszsfFPBtBsianBTzsPhfCfmprg8um2f0MaKY= =2vUa -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.11 This introduces 11 new boards, namely: * ASUS Vivobook S 15 * Lenovo Smart Tab M10 DTS * Motorola Moto E 2015 LTE (surnia) * Motorola Moto G 2015 (osprey) * Motorola Moto G4 Play (harpia) * Qualcomm AIM300 AIoT development board * Qualcomm SM8650 Hardware Development Kit (HDK) * SHIFTphone 8 * Samsung Galaxy Z Fold5 * Schneider HMIBSC board DTS * TP-Link Archer AX55 v1 Of particular interest here is the Asus Vivobook, the first supported X1 Elite consumer laptop. For IPQ6018 an SDHCI controller is added and on IPQ9574 an MDIO bus is described. The improvements to MSM8916-based devices continues, with sound and mdoem support added to Acer Iconia Talk S and GPLUS FL8005A, the latter also gaining BMS support. Samsung Galaxy devices gains PMIC and charger definitions, NFC support and MUIC. Accelerometer and magnetometer support is added to the Samsung Galaxy Grand Prime devices. On MSM8976 definitions for IOMMU, the display subsystem, wifi subsystem, and Adreno GPU are added. On MSM8996 UFS core clock frequencies are specified, FastRPC nodes are added for the audio DSP, glink-edges are described where available, the display subsystem reset is added. Venus is introduced on MSM8998 and the "No MSA Ready" quirk is added to allow ath10k to come up. GPU support is added to QCM2290 and enabled on the RB1 development board. The I2C controller used for communicating with the LT9611UXC HDMI bridge is temporarily replaced with i2c-gpio while issues with the builtin controller is diagnosed. The same is done for RB2, on the QRB4210 platform. On RB2 TCPM max current draw is corrected and the vreg_l9a regulator is marked as always on to match expectations. On the QDU1000 platform, USB is added, secure QFPROM is introduced to allow LLCC to access OTP data. USB is enabled on the two IDP boards. SA8775p gains PCIe endpoint definitions, LLCCC support, IMEM and PIL info regions. Nodes are marked as dma-coherent as needed, a dedicated carveout for shared memory bridge allocations is introduced. The SA8775P ride device is split in the two versions r2 and r3. The SC7180 Trogdor clamshell/detachable fragments are refactored for convenience, and pwmleds are disabled where unused. On SC7280 the APR nodes for interfacing with the audio services in audio DSP firmware are introduced. The Qualcomm SMMU TBUs are described, to enable improved debug support. QoS clocks are added to interconnects, as needed in order to operate the QoS settings on some buses. SuperSpeed in park is disabled for the primary DWC3 instance to address host controller issues under load. The PM8008 (camera PMIC) is introduced in Fairphone 5, regulators are named for better output, and firmware name for IPA is adjusted to the preferred file format. The HDMI bridge on Rb3gen2 is described, rtc, gpi-dma and qup nodes are enabled. The Type-C port manager found in PM7250b is enabled, for targets not using pmic-glink firmware for Type-C management. SC8180X gets a number of smaller corrections, and some cleanups - related to both functional issues and DeviceTree validation. The PSHOLD node is marked reserved, after reports that this causes issues during shutdown. Description of the USB signals are updated to match the signal path. The PM8008 camera PMIC is added to Lenovo ThinkPad X13s. The PM660 PMIC is extended with charger and rradc definitions, and the SDM670 gains a SMEM region definition. On SDM845 the Qualcomm SMMU TBU nodes are described, to enable improved debug output during faults etc. The UFS PHY is associated with its GDSC, and the DisplayPort controller is wired up to the QMP PHY. The Lenovo Yoga C630 Embedded Controller is introduced, adding battery and Type-C port management and altmode support. The C630 also gains WiFI calibration variant information, to cause selection of the right data. The missing IPA firmware path is corrected. For the SDX75 platform, AOSS, IPCC, SDHCI, TCSR, modem SMP2P, I2C and SPI nodes are introduced. SD-card support is added to the IDP board. CPUfreq support is introduced for the SM4450 platform. Missing reset is added to the SDHC controller of SM6115. The UFS PHY is associated with its GDSC, so is the PHY on SM6350. On Fairphone 4, the camera pmic (PM8008) is introduced, regulators are named for more informative debug output, and USB role switching is enabled. On the Fairphone 3, vibrator support is added and enabled. On SM8250, the USB signal paths are properly described in the OF graph, the UFS PHY gains its required power-domains description. Thanks to the introduction of PCI power sequence support, the QRB5165 RB5 WiFi chip can now be powered up, so this is added. Touchscreen interrupt flags are corrected accross a number of Sony Xperia devices, to remove the unexpected traces from downstream. On SM8450 an OPP-table is introduced for the PCIe controllers, to specify the bandwidth and performance state requirements for the different genrations and link widths. For this the PCIe controllers also gains interconnect path definitions. The LLCC register layout is corrected, and the UFS PHY is associated with its GDSC. On the SM8550 development boards speaker port mapping is added. WiFi support is finally enabled on the QRD board. The new AIM300 development platform/board is introduced. For SM8650 video and camera clock controller are introduced. SCM node gains details necessary to trigger USB ramdump (download mode) upon a system crash. WiFi support and speaker port mapping is added to the QRD and the newly introduced HDK. On the MTP the USB Type-C connector is describe to be routed to the PHY. In addition to the base HDK, a Display Card overlay is also introduced. For X1 Elite bwmon, fastrpc and GPU support, tsens, and the missing PCIe 6a instance are added. Thermal zones are described. Pmic-glink is introduced for both CRD and QCP devices, and remaining PMICs are described. Audio support is also added to the QCP. An explicit, larger, chunk of CMA memory is added to the various devices, in order to compensate for the lack of IOMMU for PCIe. Across a wide range of platforms, the thermal zone polling delays are removed as supplies are interrupt driven anyways. Also thermal related is the introduction of GPU thermal throttling, across many SoCs. The old SMSM implementation is finally transitioned to using the mailbox-based description and implementation for invoking interrupts on remote processors. As such interrupt-triggering is converted to use this mechanism on related platforms. The usb-role-switch property is removed for all USB instances hard coded to either host or peripheral across a range of boards. * tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (279 commits) dt-bindings: arm: qcom: Document samsung,ms013g arm64: dts: qcom: Add device tree for ASUS Vivobook S 15 dt-bindings: arm: qcom: Add ASUS Vivobook S 15 arm64: dts: qcom: qrb4210-rb2: Correct max current draw for VBUS arm64: dts: qcom: msm8998: add venus node arm64: dts: qcom: sa8775p-ride-r3: add new board file arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsi dt-bindings: arm: qcom: add sa8775p-ride Rev 3 arm64: dts: qcom: sm8550-qrd: add port mapping to speakers arm64: dts: qcom: sm8550-mtp: add port mapping to speakers arm64: dts: qcom: sm8550-hdk: add port mapping to speakers arm64: dts: qcom: sm8650-qrd: add port mapping to speakers arm64: dts: qcom: sm8650-mtp: add port mapping to speakers arm64: dts: qcom: sm8650-hdk: add port mapping to speakers arm64: dts: qcom: sm7225-fairphone-fp4: Name the regulators arm64: dts: qcom: pm8916: correct thermal zone name arm64: dts: qcom: x1e80100: Add gpu support arm64: dts: qcom: x1e80100: Fix USB HS PHY 0.8V supply arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge arm64: dts: qcom: sm6115: add resets for sdhc_1 ... Link: https://lore.kernel.org/r/20240706173140.18887-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
462eeb978d |
mvebu dt64 for 6.11 (part 1)
armada-3720: align GPIO keys and LED node namee with bindings Add description for solidrun cn9130 som and clearfog boards -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCZofxAQAKCRALBhiOFHI7 1a61AJwI37rg/Ki0O1OPKCfkdgrmHIIRoQCfR7rhEmu5lzgC5CwAcQhdtiEjSB4= =ONUU -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL+b0ACgkQYKtH/8kJ UidsFRAAnTaU5h/IsjYky4vOwtm+p2OoxbnOEAHzRySiJ8nAIZcYnm3i45tJK7Yt XzTRhDo1li3EpXgL+n4AZb4dY08c2dquoRky/7zSZnKV5XMhP6Oxzka3EwDq4i/s qpaMD5v22McpqbX+/y0eP0Ja7Bi5pbVQw5u+TpNqEb4NNVY38OXizREQZa0Pi3VX a/jqFCLNA9BCSZYDkFXjgToaoVnzfMfX0762DJqDoE3jE5ZUN3QWQMoCT6mx6aoD rdx9pmjELl3gtXkX+RHggfuHYiQOR/EwhscqpPQsLBUCyOzKsEXWsj4AJiBlTIqd dXLLLUfa5XZpQSJ0vOJzDGRbXJYxrHHL3cZBsJKpxN68ZMtWrCBO9UYUT4yAphvI FwFJv7adNvy65yCW0fFlIGXp3rNkG5day9rPo+2ENEIl4tACIADZD1O+EZf0ivYL 1RFEb01OCsdJOsIlmOMIQ3NjAtwLJHBENm7+ctA7jNs4DLKyJp5SOnDVLqYinuF+ 6oDznE4upreB9ErBdejoP8bQKMsP7qwbbzg8YCsMwD3+aO/6fPrpiBlJBpMgT+4x VGQH0EuTe9XyPSbVosVfWR7wK083sQXMyDHWUwHrUj3oYdYf8Ux/CO690Teo/r2A 2WAEaZT67Wraf451/kLlPWUsosgxCCPkZnc+gAVfLZxCqCua1qk= =XffQ -----END PGP SIGNATURE----- Merge tag 'mvebu-dt64-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.11 (part 1) armada-3720: align GPIO keys and LED node namee with bindings Add description for solidrun cn9130 som and clearfog boards * tag 'mvebu-dt64-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board arm64: dts: add description for solidrun cn9131 solidwan board arm64: dts: add description for solidrun cn9130 som and clearfog boards dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board dt-bindings: arm64: marvell: add solidrun cn9130 som based boards arm64: dts: armada-3720: align LED node name with bindings arm64: dts: armada-3720: align GPIO keys node name with bindings Link: https://lore.kernel.org/r/87wmlzixln.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
b4f8192afb |
TI K3 device tree updates for v6.11
Generic Fixups/Cleanups: - main_pktdma reg ranges fixes - dtbs_check warning cleanups with addition of cpsw-mac-efuse node and dropping "syscon", "simple-mfd" compatibles in favor of simple-bus - Disable McASP FIFOs across SoCs for better latency - Add memory node to bootloader stage with bootph-all - Restructure am62p and j722s dtsi for share nodes across these SoCs - DT warning fixes around USB type-C connector node (AM62/AM62P) SoC Specific features and Fixes: AM62 - GPMC and ELM addition AM62A - Enable RTC by default - Crypto accelerator support AM64 and AM65 - PRU system event support AM69/J784S4: - CPSW2G and CPSW9G addition with QSGMII and UXSGMII board support - PCIe, USB, McASP, EHRPWM node additions AM67/J722s - Fix to update GPIO count - Add gpio-ranges definition - McASP support for audio - PCIe, USB, Serdes support Board Specific features and fixes: AM62 - am62x-phyboard-lyra carrier board support - am625-verdin: nau8822 PLL support - sk: CMA node addition - lp-sk: NAND expansion card overlay AM62A - New phyboard-lyra-am62ax from phytec - CMA node addition AM64: - phycore-board: PMIC support - hummingbird-t: RS485 RTS pin polarity update - am6xx-phycore-som: overlays for variants w/o SPI, RTC, ETH PHY or w/ QSPI - EVM: GPMC NAND expansion card overlay - EVM: ICSSG ethernet MII mode overlay support - SK: power supply temp sensors support AM68 - SK: PMIC, OSPI J721e - SK: MCAN Support - Overlay for infotainment expansion board AM69/J784S4 - EVM: PCIe RC/EP, USB3, MCAN support - SK: PMIC support -----BEGIN PGP SIGNATURE----- iQFDBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmaICFIQHHZpZ25lc2hy QHRpLmNvbQAKCRDERh5FfJEW49SrB/dQ8b2v+JgzPBkOsV9ig96/BFJCOj8WfPfI quUpTkmsRGfD+dRAwBSlfFk/ulwXNf2i+ah3D5ITyplTMn78VYiPWFEMDoH4Uq7+ CHX0hdYneBv4AwhQycQQcdPKrdP2D8vSFoldBMVNh9Tdhvx3RmM4JEhbsBq45SXx QLr8CQkKEYiwxMvnacD92ymhUQdzQC9K5W+J9MIxQAdnq9nc3sosgJbsTIDn1EEu ThFV5OK6zMfVSOIsvtUafv/UdlYmb9xMDZwvGgqa2wUFhdDy7bKj5spzQSQJmoH7 ZJX3Wzfk1HPcPrU8j9anB9xP9WEFn+uzJEwsoscjFdiFL6RNJ3U= =tJcy -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL+PkACgkQYKtH/8kJ Uiex0A/5AVhK/PQ3Hfg8YMf+Z00A6w9LENtF/KowSlIook4eU/EgvMKO6m1R7ofJ ochJyHVXETD9S8ms+zABa0mAWUtvAtMn7x7RJuT+PrTJyLkHgx1VRCMoW3YxOqyq Y5k1Pec5/SwPRDKngcTeh1w8bCghj9l53j5/E1LtR01UmfwDWTo3m2DBghbI/+YK hvRIqgSxi5MAqXNNTJeDIxb6arR77NZ5CStfH6tj60B9RJWqJQeKfeMBSyg1ZYnv qBVfWdYfdkdVu8SR/W8xeYnOGM6E5sG0PfhnUH0WX2pgloL40ZXPOGw0lCNuND3c hDY+ZLGNSKtCu65JaiMF7m68tY2DnpjwAngzA+f1Ga5JP+UDXWfMqZMpnoHRCSpX 9qGmVv45xXObGDmqETPJuElw2NTz9h6CCyrUjDpAmARAbdsK4BQ6amoI+eQTAfO3 WxwepdU8rvpw8EUyKbphOdPShXdWu7DK1hVp82+Gjr1p4rYJwhQSAi91ajUubk0Z w8TLYKNjb685710xIwtC/pZejzUbsz3jkkb/022cHH6po1/VwhZ0OZXy1L6/nOLN XJmNDdpi/rhI939GNLla0OAzDlXqBe8dfiE2XQnlBWV534PTxbh0OlLM94lESG1G svcjd0IKrWi7xPnKr2Q+/IcIRIUjQHMsvzpk0fZn8CvY6gWIg1s= =7zo8 -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.11 Generic Fixups/Cleanups: - main_pktdma reg ranges fixes - dtbs_check warning cleanups with addition of cpsw-mac-efuse node and dropping "syscon", "simple-mfd" compatibles in favor of simple-bus - Disable McASP FIFOs across SoCs for better latency - Add memory node to bootloader stage with bootph-all - Restructure am62p and j722s dtsi for share nodes across these SoCs - DT warning fixes around USB type-C connector node (AM62/AM62P) SoC Specific features and Fixes: AM62 - GPMC and ELM addition AM62A - Enable RTC by default - Crypto accelerator support AM64 and AM65 - PRU system event support AM69/J784S4: - CPSW2G and CPSW9G addition with QSGMII and UXSGMII board support - PCIe, USB, McASP, EHRPWM node additions AM67/J722s - Fix to update GPIO count - Add gpio-ranges definition - McASP support for audio - PCIe, USB, Serdes support Board Specific features and fixes: AM62 - am62x-phyboard-lyra carrier board support - am625-verdin: nau8822 PLL support - sk: CMA node addition - lp-sk: NAND expansion card overlay AM62A - New phyboard-lyra-am62ax from phytec - CMA node addition AM64: - phycore-board: PMIC support - hummingbird-t: RS485 RTS pin polarity update - am6xx-phycore-som: overlays for variants w/o SPI, RTC, ETH PHY or w/ QSPI - EVM: GPMC NAND expansion card overlay - EVM: ICSSG ethernet MII mode overlay support - SK: power supply temp sensors support AM68 - SK: PMIC, OSPI J721e - SK: MCAN Support - Overlay for infotainment expansion board AM69/J784S4 - EVM: PCIe RC/EP, USB3, MCAN support - SK: PMIC support * tag 'ti-k3-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (89 commits) arm64: dts: ti: k3-am62a7-sk: Reserve 576MiB of global CMA arm64: dts: ti: k3-am62x-sk-common: Reserve 128MiB of global CMA arm64: dts: ti: k3-am62x-sk-common: Fix graph_child_address warns arm64: dts: ti: k3-am62p5-sk: fix graph_child_address warnings arm64: dts: ti: k3-j722s: Add gpio-ranges properties arm64: dts: ti: k3-am62p: Add gpio-ranges properties arm64: dts: ti: k3-pinctrl: Define a generic GPIO MUX Mode arm64: dts: ti: k3-am62: Add cpsw-mac-efuse node to wkup_conf arm64: dts: ti: k3-am62a: Add cpsw-mac-efuse node to wkup_conf arm64: dts: ti: k3-j784s4: Add cpsw-mac-efuse node to mcu_conf arm64: dts: ti: k3-j721s2: Add cpsw-mac-efuse node to mcu_conf arm64: dts: ti: k3-j721e: Add cpsw-mac-efuse node to mcu_conf arm64: dts: ti: k3-j7200: Add cpsw-mac-efuse node to mcu_conf arm64: dts: ti: k3-am65: Add cpsw-mac-efuse node to mcu_conf arm: dts: k3-am642-evm-nand: Add bootph-all to NAND related nodes arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM62Ax dt-bindings: arm: ti: Add bindings for PHYTEC AM62Ax based hardware arm64: dts: ti: Add am62x-phyboard-lyra carrier board arm64: dts: ti: k3-am62a: Enable AUDIO_REFCLKx arm64: dts: ti: k3-j784s4-evm: Enable analog audio support ... Link: https://lore.kernel.org/r/37f251a1-f3bd-402f-ab22-cf786c3871d7@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
03b4edd51f |
STM32 DT for v6.11, round 1
Highlights:
----------
-MCU:
- Add syscfg missing clock on stm32f429.
- MPU:
- STM32MP13:
- Add camera support on stm32mp135f-dk bord using DCMIPP and
GC2145 sensor.
- Document PWM output for stm32mp135f-dk
- Add goodix touchscreen support on stm32mp135f-dk board.
- Add new DH DHCOR / DHSBC board (Som + carrier board) based on
STM32MP135F SoC.
SOM part contains: STM32MP135F SoC, 512MB DDR2L RAM and
eMMC/SDIO wifi module.
The carrier boards embedds 2 RGMII ETH ports, USB-A,USB-C
and an extansion connector.
- Add Ethernet controller support on stm32mp135f-dk.
It uses LAN8742A PHY based on RMII.
- STMP32MP15:
- Rework Octavo OSD32MP1 split for USB phy.
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- STM32MP25:
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- Enable firewall for RCC.
- Add all U(s)ART nodes for stm32mp25.
- Add 3 power domains for low power modes.
- Add HPDMA support.
- Add Ethernet controller (ETH2) support on stm32mp257f-ev1.
It uses Realtek PHY based on RGMII.
- Add and enable SCMI regulator support.
-----BEGIN PGP SIGNATURE-----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=sjji
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=EqEk
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.11, round 1
Highlights:
----------
-MCU:
- Add syscfg missing clock on stm32f429.
- MPU:
- STM32MP13:
- Add camera support on stm32mp135f-dk bord using DCMIPP and
GC2145 sensor.
- Document PWM output for stm32mp135f-dk
- Add goodix touchscreen support on stm32mp135f-dk board.
- Add new DH DHCOR / DHSBC board (Som + carrier board) based on
STM32MP135F SoC.
SOM part contains: STM32MP135F SoC, 512MB DDR2L RAM and
eMMC/SDIO wifi module.
The carrier boards embedds 2 RGMII ETH ports, USB-A,USB-C
and an extansion connector.
- Add Ethernet controller support on stm32mp135f-dk.
It uses LAN8742A PHY based on RMII.
- STMP32MP15:
- Rework Octavo OSD32MP1 split for USB phy.
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- STM32MP25:
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- Enable firewall for RCC.
- Add all U(s)ART nodes for stm32mp25.
- Add 3 power domains for low power modes.
- Add HPDMA support.
- Add Ethernet controller (ETH2) support on stm32mp257f-ev1.
It uses Realtek PHY based on RGMII.
- Add and enable SCMI regulator support.
* tag 'stm32-dt-for-v6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (31 commits)
arm64: dts: st: describe power supplies for stm32mp257f-ev1 board
arm64: dts: st: add scmi regulators on stm32mp25
regulator: Add STM32MP25 regulator bindings
ARM: dts: stm32: omit unused pinctrl groups from stm32mp13 dtb files
arm64: dts: st: enable Ethernet2 on stm32mp257f-ev1 board
arm64: dts: st: add eth2 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: add ethernet1 and ethernet2 support on stm32mp25
arm64: dts: st: add HPDMA nodes on stm32mp251
ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: order stm32mp13-pinctrl nodes
ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board
ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
ARM: dts: stm32: Document output pins for PWMs on stm32mp135f-dk
ARM: dts: stm32: OP-TEE async notif interrupt for ST STM32MP15x boards
ARM: dts: stm32: Missing clocks for stm32f429's syscfg.
ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC board
ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board
dt-bindings: arm: stm32: Add compatible string for DH electronics STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: osd32: move pwr_regulators to common
...
Link: https://lore.kernel.org/r/8f10bd29-d067-4060-89ff-2e1a605f3141@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
9289b97a67 |
Allwinner SoC device tree changes for 6.11
This includes a commit shared with the clk tree. This commit adds clock and reset indices to the device tree binding, and thus is needed for both the device tree and driver changes. ARM64 device tree and binding-only changes - Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC - Add cache information for A64, H6, and H616 SoCs - Correct model names and descriptions for Pine64 boards - Add GPADC (general purpose ADC) for H616 SoC - Add ADC joysticks based on GPADC for anbernic-rg35xx-h board - Add additional CPU OPPs for the H700 on top of existing H616 ones - Enable DVFS for rg35xx boards - Add IOMMU for H616 SoC RISC-V device tree changes - Add system LDOs to D1s/T113 SoC - Add ClockworkPi and DevTerm device trees -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmaC5BEOHHdlbnNAY3Np ZS5vcmcACgkQOJpUIZwPJDDszRAAohtAXVlhcOZUyY6jnToNDRhRDe4WR2dKNuth D/sM93uBxEtHkHsV11xKdmXALYszT3c1IxA84Cj3uwBvutIK4/KQUDbtDvGedz/o 90v3bgAR1ETf7RrQFCxpQUFYNufpnXb5ZHA5jRSdxyg9coLR7sDab0r6UCh/EzyN rykvB2oSmjxyG0OjBUU3IcR0B5nliGRc9esVhdSW4cGblaJaT/NrlsmUGL39hXP2 BayJ3FFfS2izs5uHMOeQUaveadBGssc/kzJvnwy/jeM+76uY4SlH58/dl0ivWM0/ h5mifWbMIdl5kUEkUz7OaPT9O6K/1O1/heQYrQSHNKtgD6NN9uS4QWuGyfsWcpUo iRXnYrscWuGQH8ICAG9upNCto2RXn1nS3+FYv/CmNQ+Nl39RpGGWKW9KPesCttdr OgjWGgspyBT3xh4NhrxLbEOmZaCg6ZGfr8Vp4VrXLMbSOrV6Qu8VsJcRWkfwm3yb tg9ONSFrSBNwmWQIqjtpWt3j81sOKkz2WYV6+hNgDyQ5HZQZWNHhOUVQ2W912TNh vJ9d+3jgtn9wj2DyPdkzPRaNaVK+KqRbpUIXLc7TUAJaMcHzX6+ekt1576ZBNUYL hFOoMvzu6k02Fmr8qUe9PX2p5Ie6ubF+2/aWGkZ0pF2cdht1Q6IDiXsSX3PW+VBU acB1TT0= =3vmg -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL9/8ACgkQYKtH/8kJ UifiHRAA0qHvjj5uaQiQnjJgOFF+Rmf3goNje2S9f35ziO2AGKqsfp651mBbZFpJ yFkIMlELMBLmgB9cEXfvoWlvUjITxduiMjn0aNfu4czRhhk1qiqwy+CVhDHT681g 71s1crZ0gT/B9hNQkfHz6AmrvMl6k9NPHioaci4abRNXsGNrZuuSFNOAC82l8nrb PLJZtNOEbtkVP5pdBatTlsdJywOLpl1KwYvXbbC8oXvMobywUSsW/gjcHV0hUjlp 4kwDEyi1cUGeNEuPAcp2Pp0H+WtHJsaTN1BhIy3kyCGiCXX3ShkZiaYIPwBGdUrz NJihJ/WoU2pMzlX5OH2L2d1KybZhOPB+kzSqw2TWyZuKNc+HY3BaXeZ8uVUz59Tv WSml2dz4+T816jDcBrK9sFC1uiJlbieKNJsH8Ol0FykJcfjD48tP7Y1uMhqN3ict y/FZ6nvPNEf7YPGGTXDjn0d5ifXAyGXLhIWxRXBP701HAzTkUPeTEdMLwj+6H1eh HBxFaa4yeAtH9+0c/Tf1Ge244OxbavwjJU4ufyD7X440nHqFVXQvF2FD451tBd5F HbXZ3cm+E8/zg55L0sAcY++5W+Aa2S+TvK64nrKcGEEDonBj3WwdNL5iwtzugWCv /AQg1UP3uQIyPvrwcyyoG8lenyHjOhZnACH3qbxpO9JnnwEIXQk= =Emn4 -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner SoC device tree changes for 6.11 This includes a commit shared with the clk tree. This commit adds clock and reset indices to the device tree binding, and thus is needed for both the device tree and driver changes. ARM64 device tree and binding-only changes - Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC - Add cache information for A64, H6, and H616 SoCs - Correct model names and descriptions for Pine64 boards - Add GPADC (general purpose ADC) for H616 SoC - Add ADC joysticks based on GPADC for anbernic-rg35xx-h board - Add additional CPU OPPs for the H700 on top of existing H616 ones - Enable DVFS for rg35xx boards - Add IOMMU for H616 SoC RISC-V device tree changes - Add system LDOs to D1s/T113 SoC - Add ClockworkPi and DevTerm device trees * tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees riscv: dts: allwinner: d1s-t113: Add system LDOs arm64: dts: allwinner: h616: add IOMMU node arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling arm64: dts: allwinner: h616: add additional CPU OPPs for the H700 arm64: dts: allwinner: anbernic-rg35xx-h: Add ADC joysticks arm64: dts: allwinner: h616: Add GPADC device node dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks ARM: dts: sunxi: remove duplicated entries in makefile arm64: dts: allwinner: Add cache information to the SoC dtsi for H616 arm64: dts: allwinner: Add cache information to the SoC dtsi for A64 arm64: dts: allwinner: Correct the model names for Pine64 boards dt-bindings: arm: sunxi: Correct the descriptions for Pine64 boards arm64: dts: allwinner: Add cache information to the SoC dtsi for H6 ARM: dts: sun50i: Add LRADC node dt-bindings: input: sun4i-lradc-keys: Add H616 compatible Link: https://lore.kernel.org/r/ZoQa8r1N8yi7FlPV@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
b85aad3db1 |
i.MX arm64 device tree change for 6.11:
- New board support: imx8mm-iot-gateway, imx93-9x9-qsb, imx95-19x19-evk, imx8mp-tqma8mpql-mba8mp-ras314, etc. - A series from Adam Ford that improves imx8mp-beacon-kit support by fixing dtschema issues and enabling HDMI bridge HPD - A set of changes from Alexander Stein that adds partitions subnode to spi-nor - A great number of changes from Frank Li that add audio, flexcan, gpmi related devices for imx8dxl, imx8qm based boards - A bunch of layerscape dtschema issue fixes from Frank Li - A series from Krzysztof Kozlowski to use defines for interrupts - A number of improvements on i.MX8MP DHCOM devices from Marek Vasut - A couple of changes from Parthiban Nallathambi that add PCIe PHY and RS232/RS485 overlays for phygate-tauri-l board - A series from Shengjiu Wang that adds bt-sco and XCVR sound card support for imx8mp-evk - A series from Tim Harvey that fixes dt-schema warnings and adds DP83867 configuration for i.MX8M Venice devices - Other random feature additions and improvments on various boards -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmaEB9sUHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM50fQf+LLdjIw/Y2qL1nGtONR2ztD2pykGf 8EDXlEjYBKPgnEqm9Fx04KNlITG4rVZx8vPODTWqbgg/LMyxhoT5oc79Y3cgPU2N +mLYEWWS4M5tCbBsPyM2eVGCGlL6ljU9oAzpCOjeKCWcoALfAKw0Ra0McSDcmnUW numO5gynIJtMk8Vn7bxoOwbdNFWPY+egT9VQiWYz3SQzxND5nDfzO4sWNvZ8A5h2 6lScii47uZd4LOiZy9fijX2xxm8Hc4VXvJyiN+pNcWWlxc/tAzwvq28/xoZcUu90 pK9l3ZYyuUumKEaCc9up7BqNV3KuYpcodk7tufSzuqtSYnVenQU81xZUgA== =JIHm -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL95oACgkQYKtH/8kJ Uif1aQ/6AyIOvlb9LohxzMkR7DXjiPYp3yjOuAJm9+afLfQ7m5eHhF+F0MUVlhCp Kcrc+XoYBjxYKjNg09GiWSywZH6dqn0vcBjdTmLXHuiQAovalv6uuIIS3mk3uYVw x0/FvrWVdBXoOB5c6jmQip4tuyacMzQseDBe7Bejw5YOEZ0havrZ+cGwxCHrmWzT ngsw5IBRs/ItljyP0w9kkgLaXw6UAgavB892przfdxbZVR1axLbBI+eKe7pj/nHC A1GUv4j/i3rOTNUfMdNgtid+ke2S0awqKEsol8k4WvIWeoD1Pie2pdcLPR0q8oZu MR5PPXDNf89wZ5DYDkhDHwmqC01k33EIEF2LJQBjSBy6FhsY8EbcZmN+X2wUGpEu gPzIxX2AmXkhVIWN0jTxpDhFzSTnhXqHgzAm74xXWuE3/5+hXKX41OgcJrZTpd3n z9oRecsVejJc1JTSs+vQOOjVBNL6nwFMH8T8W3UTxDbrQOP0iGVTvN1TeIgtJLkI OyNDSN5t9hRsx2rvR6NDTUWqk3DVVSkhZvb/E7Wk4NKO6dNQwbE4qniK7OUMqrVH CCze4n3RUJ3R4SM7H+MRDtdB7rtCrxhrD0nXlyoVoM1+dvV9uHO/shAl4Nb+08v1 ch3Vaet5zv3cGVKAmnn8BceaOtxcmz8iz1mhDubPjGOhrb7I+RU= =Orkt -----END PGP SIGNATURE----- Merge tag 'imx-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree change for 6.11: - New board support: imx8mm-iot-gateway, imx93-9x9-qsb, imx95-19x19-evk, imx8mp-tqma8mpql-mba8mp-ras314, etc. - A series from Adam Ford that improves imx8mp-beacon-kit support by fixing dtschema issues and enabling HDMI bridge HPD - A set of changes from Alexander Stein that adds partitions subnode to spi-nor - A great number of changes from Frank Li that add audio, flexcan, gpmi related devices for imx8dxl, imx8qm based boards - A bunch of layerscape dtschema issue fixes from Frank Li - A series from Krzysztof Kozlowski to use defines for interrupts - A number of improvements on i.MX8MP DHCOM devices from Marek Vasut - A couple of changes from Parthiban Nallathambi that add PCIe PHY and RS232/RS485 overlays for phygate-tauri-l board - A series from Shengjiu Wang that adds bt-sco and XCVR sound card support for imx8mp-evk - A series from Tim Harvey that fixes dt-schema warnings and adds DP83867 configuration for i.MX8M Venice devices - Other random feature additions and improvments on various boards * tag 'imx-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (91 commits) arm64: dts: imx8mp: Remove 'snps,rx-sched-sp' arm64: dts: imx8mm-verdin: add TPM device arm64: dts: imx8mp-evk: Add audio XCVR sound card arm64: dts: imx8mp: Add audio XCVR device node arm64: dts: imx8mp: Update Fast ethernet PHY MDIO addresses to match DH i.MX8MP DHCOM rev.200 arm64: dts: imx8mp: Do not reconfigure Audio PLL2 on DH i.MX8M Plus DHCOM SoM arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-bus arm64: dts: fsl-ls1046a: rename thermal node name arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog node arm64: dts: layerscape: rename aux_bus to aux-bus arm64: dts: layerscape: change pcie interrupt order arm64: dts: layerscape: rename node name "wdt" to "watchdog" arm64: dts: layerscape: add #dma-cells for qdma arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for fman3 arm64: dts: layerscape: replace node name 'nor' with 'flash' arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches' arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-single arm64: dts: layerscape: add platform special compatible string for gpio arm64: dts: layerscape: rename node 'timer' as 'rtc' arm64: dts: imx8qxp-mek: Pass memory-region to the DSP node ... Link: https://lore.kernel.org/r/20240702142153.413061-4-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Heiko Stuebner
|
31390eb8ff |
arm64: dts: rockchip: add ROCK 5 ITX board
The ROCK 5 ITX as the name suggests is made in the ITX form factor and actually built in a form to be used in a regular case even providing connectors for regular front-panel io. It can be powered either by 12V, ATX power-supply or PoE. Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot, 2*2.5Gb PCIe-connected Ethernet NICs. As of yet unsupported display options consist of 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors. USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel connector. Schematics for the board can be found on - https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf - https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240704153815.837392-3-heiko@sntech.de |
||
Diederik de Haas
|
3087576e1c |
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
Similar to
|
||
|
Diederik de Haas
|
dbdadc14b9 |
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
Pine64's Rock64 was missing the avdd supply properties on the hdmi node, causing the following warnings: dwhdmi-rockchip ff3c0000.hdmi: supply avdd-0v9 not found, using dummy regulator dwhdmi-rockchip ff3c0000.hdmi: supply avdd-1v8 not found, using dummy regulator In the Rock64 Schematic document version 2.0 those supplies are marked as DVIDEO_AVDD_1V0 and DVIDEO_AVDD_1V8 respectively, but in version 3.0 those are named HDMI_AVDD_1V0 and HDMI_AVDD_1V8, which is a bit clearer. In both versions those are connected to LDO3 and LDO1 respectively. While the DeviceTree property is named 'avdd-0v9-supply' the 'rockchip,dw-hdmi.yaml' binding document notes the following: A 0.9V supply that powers up the SoC internal circuitry. The actual pin name varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes HDMI_AVDD_1V0. So the 'vdd_10' reference is not an error. Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20240704191919.38856-1-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> |
||
|
Arnd Bergmann
|
90a4146de8 |
Minor improvements in ARM64 DTS for v6.11
Few cleanups and improvements which were missed by their maintainers:
1. Spreadtrum: correct PMU nodes - split per clusters.
2. HiSilicon: add dedicated compatible to syscon node ("syscon" alone is
not allowed).
3. APM: add dedicated compatible to syscon node (binding applied to MFD
tree).
-----BEGIN PGP SIGNATURE-----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=+vkm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=UGMh
-----END PGP SIGNATURE-----
Merge tag 'dt64-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.11
Few cleanups and improvements which were missed by their maintainers:
1. Spreadtrum: correct PMU nodes - split per clusters.
2. HiSilicon: add dedicated compatible to syscon node ("syscon" alone is
not allowed).
3. APM: add dedicated compatible to syscon node (binding applied to MFD
tree).
* tag 'dt64-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: apm: Add dedicated syscon poweroff compatibles
arm64: dts: hisilicon: hi3660: add dedicated hi3660-usb3-otg-bc compatible
dt-bindings: soc: hisilicon: document hi3660-usb3-otg-bc
arm64: dts: sprd: Split PMU nodes for heterogeneous CPUs
Link: https://lore.kernel.org/r/20240702065359.7378-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
c36a19ed7e |
Samsung DTS ARM64 changes for v6.10
1. Google GS101: Minor cleanup and add fake regulators to USB phy, to
satisfy dtbs_check. The PMIC providing these regulators is not yet
implemented.
2. Exynos850: Add True Random Number Generator.
-----BEGIN PGP SIGNATURE-----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=Oc6g
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=SKUS
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.10
1. Google GS101: Minor cleanup and add fake regulators to USB phy, to
satisfy dtbs_check. The PMIC providing these regulators is not yet
implemented.
2. Exynos850: Add True Random Number Generator.
* tag 'samsung-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos850: Enable TRNG
arm64: dts: exynos: gs101-oriole: add placeholder regulators for USB phy
arm64: dts: exynos: gs101: reorder properties as per guidelines
Link: https://lore.kernel.org/r/20240702063514.6215-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Arnd Bergmann
|
cdb3f6ba4b |
arm64: tegra: Device tree changes for v6.11-rc1
This contains one patch that reworks the device tree structure for Jetson Orin NX and Jetson Orin Nano, which are both within the same family. This restructuring makes it easier to extend both platforms in a consistent way in the future. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmZ+3YsACgkQ3SOs138+ s6E6qg//eJu9trfH6Tgqvga/YDV98jLHXl6mbjk1zpYOE6K51gM2E9ypaU2Xaefz uwZwKe4rDs9GPeKzm2lyd9hHvYUSgzQ5JYfkw8a9G3Ne8E+fbZZ//ElGrUAAbKbd C6uN/uXg5udsiTKuXMf/PSAzyvUbUJOY4DC7CA4ilu0GO3pmtafpcaBPvUAWGqDR IWVJGFjlYNPWB+ROmyhTYCtpDQX/4Ok5JgjLyOiSzYq/qBZ3AA1OaZW9u10nbcH+ cBeCBjt/0Pd1bqSxgPwdSxztR6EdmA34zAhi77rJ5shjfR/lqEntwZabg7SezTXK ZiduASpTr95kHWdJ6+v25Dj0JzXG8b/9KV6WDMhBY6SBQDiJoWwsGaRcMjbAolHN 0t58Y/h8mlSREbQc1Yrd9Gk6g/Z9tSfa0TJ3bY4I+squw01Xtl3zB0kw8dBPKMU6 d5YoTci5QCpih9r7fQ+6YCOA2/QcSxpFURa0Hlm7MjGPRpkmaOt8ZhrfdkFs97mG H9I1KZ4URX7YwVahvO6G+bRSJLvJNqO3IwZIk/vbCOZQCyXz2RX7vHKN9J734ZBA ThtdTvYCDBo0B70h/SAQYza3o40+WXHaDiEUbDa+3ExGOL0vg6hIzoLB5Gyc56CY xKlaDeJUX2XcPoZ11feLbvYu0ylCThmsP/DR7t+qgfkqYfMM8Dw= =+CSv -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL9gIACgkQYKtH/8kJ UicCFBAA5AQQaTZ7ru6bZnGMPMphO26fYTWokqLuRtky3Js6+MD8z6E9CE+KAqMe uETX2ANP3yjIWRKO0ktRndckdA5IzOcyOP9Dp2VuQyuc6OCk7RU2gOvepazYgIu1 JTP/cjka+UwG6asCSQx8+5Ly00RZOTGoVfjfgu48gB3mE3tWPLN0L5C5MzqT4RgY AQ4PWogpyj3GDq82eZtd3cXs+oTuz20x240pwZME9fP7Kja0dyp2Jm5ZrkrIcO+B vV73MZM8eK2nePnpMC+2pUvvB9xH1/MJsaeJT6uz6RN6plex4MabobeZMrjhnPIG 43AaLMM7FMyfjW8hD0b8tQKyda3kXqsYsg/SlVqrA0d92XU//zTWLd7+EeJmEqsf TxjmEKkgwK5tDnwuptnfnZLfvwXPRPqs5X6E+dXTUpTXFsXTTpXDvu3Tjn+B0prC nk4PQBdHKPGxc2PY1L1uscPpGVjMSGjHAaXqIeup6BOuXoptorUCSzl6jKOiNlIc 787kqtlIgE/s0cdUjW2ma1oVhMJZcgAoxJi9UJoQ0ZzwBaBRaMhWYP+J19yGPx4D joLmFFLH3M2sNQC+sFpL+aWtx+1/EShAJ6W3Bqt6yZ3DXyjyi35+Z2vlq31NMIT2 gDwWLFK+fa/t0mPzmtlmtO0nlUaISxZjr9jTs1Szwkro+Ik/SNo= =CUSX -----END PGP SIGNATURE----- Merge tag 'tegra-for-6.11-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree changes for v6.11-rc1 This contains one patch that reworks the device tree structure for Jetson Orin NX and Jetson Orin Nano, which are both within the same family. This restructuring makes it easier to extend both platforms in a consistent way in the future. * tag 'tegra-for-6.11-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Restructure Orin NX/Nano device tree Link: https://lore.kernel.org/r/20240628210818.3627404-3-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
74de3f227e |
Allwinner fixes for 6.10
- Fix PMIC interrupt number for Remix Mini PC -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmaC4bkOHHdlbnNAY3Np ZS5vcmcACgkQOJpUIZwPJDDu2RAA3q3WzjUnNuiJw6oHBQ9lsA9M3A1OLaU4RszS QK8fSab4XWXti07xpZKTH0kcvUapWVVbociKj3glwJe+cCdr88tCmOFxcUBF4R/x kffrSRDcD/ext3vbmszSTCnZp+qcfcDyyHYdNVrpwuv1aISu90RLBSmUPqoI0OM5 XsIgA5QM6MKymFj45pkkL1P74xVfg4vaGwqIa3CBQm3pb+HJrdfbFKjIUvRD/8/x ty/1KkNGKSNRCpv3d3G1C4/CRVrQ6x1HE8B06LPzXhfUNs+FDWQN24KBL4ayXbD7 KrLx2HJQkh8I8t6txtD71FcM+54w3SZ58KpbJTiFefH7ridp4lekNbGv2iT3igWK tbrYuXwiYW4rzSJQqN3X0KYmeUOa23EpyPWUPKSW29u7yQvlTXW5hgyT936uP/D8 nYfARtuLgGJNnoiyXCM14o1GtRm5FaSltjKzGkdKbrB2ceLtqUgSjv0WWeFzTI8j Xp7thQJqopsmd25ZEzNSy0dIWaBQx0yyrYBATwwV7jrxuh0mBCqyyPWuq5RZ7bhQ Z2co9L74KaEIzxR3MfkoFsnTPv/Q7k6OUjbDnzauTvk44EyzUZK+AjJ07BI8nPes pjPraHqL4kX6BowauTNy5+ch6GshZesfjr8vmCccNG1+fyTIA1iABjUgPl0y4hPt ndK5K94= =woAy -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL9PMACgkQYKtH/8kJ Uifp+BAA0XJEZ0vdGzbFAkIs2hXLqQFUldi0JZAotxLmXz3INCrXkKdnN9o0THon 01moV9A5q4c+tfqpyTSTN4eQOCf331JitiOwmZCfweL/wsYYKsCuFLQt+RPaNT6Y 61/vycgvSOuYRinrkBmjNHyHbXtk0QtEYpSO2n2OA9HfwzZV+LbMHm4KSEX995sa ZN9F0X7GVNSUOeD+m+Uim6QpKBWZfOsrlFAS21lKrYMc/ja17Uo7EFOgLNerEJkX aAduFsvemnCujJYguAfVggPGtY8b1vPv3qB+GwGFsH5UrRXhHM0O+VWXpyNHI92v 7iV0yavckJp4dL01/aQlLkizgk8BRuEY17tk6I2RiReTon0vheVaiEbIQMh/MkhP HQbK93d6KUvNHiUxftQDA+QHRur3uM4fl/lDcSug9RzF55adArEzAQXfACdJCx93 cm9+4lF0py0df29lFG/V0aZqRK6TKLC0ZK+7icwl/XfmDi/d1SI4bpXTyuP8MdlB nhF3Abv9ZUOHHLnrOuafjYvzA4XHzZaa7ZL7SCeY6ib2Q/446KolOlpAMPNvFk89 oUqkXhHezgwyBa71QlfqAsE3XplzLnYOvNs1q9LFjC74ONZ1TaAOkQInOaP0mPzS UpB6EEgoLa8HB91dV07tYuRvMc58pNWoupO2AMrlzHT49+MyVAQ= =+Kc0 -----END PGP SIGNATURE----- Merge tag 'sunxi-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner fixes for 6.10 - Fix PMIC interrupt number for Remix Mini PC * tag 'sunxi-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: Fix PMIC interrupt number Link: https://lore.kernel.org/r/ZoQY5k21RQLOrBQ3@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
bcec291967 |
Qualcomm Arm64 DeviceTree fixes for v6.10
This marks the PSHOLD node on SC8280XP as reserved, to resolve a regression where a reset is triggered instead of a clean shutdown. Also on SC8280XP the touchscreen properties are adjusted to make it properly described on CRD and make it work on the Lenovo Thinkpad X13s. Corrects the LLCC definitions on SC8180X and QDU1000 to allow these drivers and their dependencies to probe. X1 Elite CRD is given more CMA space, to avoid running out during boot, as PCIe SMMU is not accessible. Audio configuration is corrected, on the same. SM6115 SDHC is given an IOMMU stream, to avoid access issues. Lastly the EL2 non-secure physical timer interrupt on SA8775P is corrected from its previous incorrect value. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmaDbysVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FjB4P/i8+CZGdqXeUbfX+QuRKr91W9m7H NIdya6FZ6bg3RhmrLLlhmyG3iVVQNYvZ1mjAsK43xtnOU2DX/OMrNAUAdmagC5cI VfjPGlHKbGmK5rfDfxYNRocszo/zh4CFQQmVElsBSaZyi1pPkfOWnUZjTzlAetS4 FMbrDjJyFDPxhzdhPZWyAEAd6eeYMbpEeXOB0NZGdsv3ncfg311cBy2MHEn052J9 lAOexSfhw1hNTMPSfjK/8OKQiAKuA5DWUxZL+/7/5P72zB0GZUCzDJABRRlaWjsM d8eJenuHpluRZxSTtmw5uSmBjbKUW6Q3lhMNeVIcxDhyaMNq2Asw3LIiJFAXQmB3 goQek5Lc33VRAdnw6Vfphzy2nUBAeT5YBl+aGJb8cVR12BKWN0JiVVm1/Ewxd23j GcfKTsLSMI1ZPOsjNgtoqa8O6y76vX1c0+Vn5GvG/8iSa5qlzattMD7hWra5erll MhlOr3OikH1rhTTlJNc6WPJwmYbnf4DAemUyzvF9oIXZf5J05ljDW7KUBJyFH7ip oIfi6JNsuABcDmT2vMFofw2jJwbo6wb1bxUoTYDITRy45GOs44pZAfuxFz5Z0vST kGeqqi4xz3JhNTSLDf50ahJBOHapg5C1c+OSZ22muLGl/7Hzpmd2FhdI85e1+arL TcF+8NCZBkpcraLa =rkld -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaL9IAACgkQYKtH/8kJ UifKORAAmbEROkWShKsTmVk9sl863SUqu3wPOyFUgY0Dw+xsUZum5yk1mxeuJCaE 3o5EzRerPwAyEcMw3jWXIYmKvwP4ocIMo7FVKLqD4icEteufM6uq03AeTMfkWi6v J97zXSrl7lxr3hRnb5NvKm/gUakuHThRAUkzPxccHrgJz2bMbqD/Jz/lKUw+boip Yjw/bk0rz+otSEk5uwG39lDP5eJgukH5cAMBo4YnmAd2KKr56TNPjqRCu2XGNHnU HnJnw8v9iar3imUH7RlM6XBbdd2YDAe9nAcgHZ11ACVaO9eYtsLVHA4Ms6p3zUPE kVtW8NcObc6MDLABc2x5J4lposaPuuVRquchlaPE7UTSidqkq2jvTcME40Mse+lp MfoMhHN35FDtogYFVjvD4dmB1Q0bY74YPl9xa+NuymORJcft/Y3dAbInmsRhBdiC ifK892Z76m7eob+ul7egNeY2uDitoSpY8GKL41EG98G+u/g93J/kv9wjO0o2JH62 RDJge8FY38noqLK3GIk3BIXq9730N+Tau9HGn/Lpqt8JWEAbTcgAH/wjXmKl/GkU zFSgyRTbiyOx8tLsW9RF3D/YMPyzyhyAnwz03llX+iFXIws4o2LSGQ2u6ESsAXxP BQ+XOj2WxGpaRMN8XIrgV08+TZwP6MkqaNK0PRSRAr+JEpRNVio= =R3Mv -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm Arm64 DeviceTree fixes for v6.10 This marks the PSHOLD node on SC8280XP as reserved, to resolve a regression where a reset is triggered instead of a clean shutdown. Also on SC8280XP the touchscreen properties are adjusted to make it properly described on CRD and make it work on the Lenovo Thinkpad X13s. Corrects the LLCC definitions on SC8180X and QDU1000 to allow these drivers and their dependencies to probe. X1 Elite CRD is given more CMA space, to avoid running out during boot, as PCIe SMMU is not accessible. Audio configuration is corrected, on the same. SM6115 SDHC is given an IOMMU stream, to avoid access issues. Lastly the EL2 non-secure physical timer interrupt on SA8775P is corrected from its previous incorrect value. * tag 'qcom-arm64-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: qdu1000: Fix LLCC reg property arm64: dts: qcom: sm6115: add iommu for sdhc_1 arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers arm64: dts: qcom: sc8180x: Fix LLCC reg property again Link: https://lore.kernel.org/r/20240702030913.340814-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Anton Bambura
|
88bf3be9c3 |
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
Add initial device-tree for LG Leon LTE (lg-c50), currently supported features: - eMMC; - MicroSD; - usb in peripheral mode; - WiFi/BT; - vibration; - keys. Signed-off-by: Anton Bambura <jenneron@postmarketos.org> Signed-off-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240623-msm8916-lg-initial-v1-3-6fbcf714d69b@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
Cristian Cozzolino
|
0655b44746 |
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
This commit adds initial support for the LG K10 smartphone. Support for the following features is included: - Serial - Keys - Battery and charger - Accelerometer, magnetometer - Touchscreen - Sound and modem - Haptic Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com> [Nikita: Minor cleanup] Signed-off-by: Nikita Travkin <nikita@trvn.ru> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240623-msm8916-lg-initial-v1-2-6fbcf714d69b@trvn.ru Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
Varadarajan Narayanan
|
5d0ab61a70 |
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
IPQ SoCs dont involve RPM in managing NoC related clocks and there is no NoC scaling. Linux itself handles these clocks. However, these should not be exposed as just clocks and align with other Qualcomm SoCs that handle these clocks from a interconnect provider. Hence include icc provider capability to the gcc node so that peripherals can use the interconnect facility to enable these clocks. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Link: https://lore.kernel.org/r/20240430064214.2030013-7-quic_varada@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
Satya Priya Kakitapalli
|
cfe9685473 |
arm64: dts: qcom: sm8150: Add video clock controller node
Add device node for video clock controller on Qualcomm SM8150 platform. Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240509-videocc-sm8150-dt-node-v4-2-e9617f65e946@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
Jens Reidel
|
e3e169cd28 |
arm64: dts: qcom: pm6150: Add vibrator
Add a node for the vibrator module found inside the PM6150. Signed-off-by: Jens Reidel <adrian@travitia.xyz> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240606181027.98537-3-adrian@travitia.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
Mukesh Ojha
|
134a4b2f3b |
arm64: dts: qcom: sc7280: Enable download mode register write
Enable download mode setting for sc7280 which can help collect ramdump for this SoC. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240705143443.1491956-1-quic_mojha@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
Luca Weiss
|
8cf636a032 |
arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermals
Configure the thermals for the PA_THERM1, MSM_THERM, PA_THERM0, RFC_CAM_THERM, CAM_FLASH_THERM and QUIET_THERM thermistors connected to PM6150L. Due to hardware constraints we can only register 4 zones with pm6150l_adc_tm, the other 2 we can register via generic-adc-thermal. The trip points can really only be considered as placeholders, more configuration with cooling etc. can be added later. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20240705-fp4-thermals-v2-2-a4870a8d084f@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Luca Weiss
|
4d37847187 |
arm64: dts: qcom: sm7225-fairphone-fp4: Add PMK8003 thermals
Configure the thermals for the XO_THERM thermistor connected to the PMK8003 (which is called PMK8350 in software). The ADC configuration for PMK8350_ADC7_AMUX_THM1_100K_PU has already been added in the past. The trip points can really only be considered as placeholders, more configuration with cooling etc. can be added later. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20240705-fp4-thermals-v2-1-a4870a8d084f@fairphone.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
|
Luca Weiss
|
81008068ee |
arm64: dts: qcom: sm6350: Add missing qcom,non-secure-domain property
By default the DSP domains are secure, add the missing qcom,non-secure-domain property to mark them as non-secure. Fixes: |
||
Krishna Kurapati
|
cf4d6d54ea |
arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB
For Gen-1 targets like SDM845, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM845 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Krishna Kurapati
|
44ea1ae3cf |
arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB
For Gen-1 targets like MSM8996, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8996 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Krishna Kurapati
|
c5d57eb7d0 |
arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB
For Gen-1 targets like SM6350, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SM6350 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Krishna Kurapati
|
074992a116 |
arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USB
For Gen-1 targets like SM6115, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SM6115 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes:
|