Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code.
No functional change intended.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/609596/
Signed-off-by: Rob Clark <robdclark@chromium.org>
- Require BMG scanout buffers to be 64k physically aligned (Maarten)
Core (drm) Changes:
- Introducing Xe2 ccs modifiers for integrated and discrete graphics (Juha-Pekka)
Driver Changes:
- General cleanup and more work moving towards intel_display isolation (Jani)
- New display workaround (Suraj)
- Use correct cp_irq_count on HDCP (Suraj)
- eDP PSR fix when CRC is enabled (Jouni)
- Fix DP MST state after a sink reset (Imre)
- Fix Arrow Lake GSC firmware version (John)
- Use chained DSBs for LUT programming (Ville)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmbQf+AACgkQ+mJfZA7r
E8pKQQf+K6n6lMhtpfNUYkFS6IFkNDMuWZV6R262AWNFIJkBumfiqb+LLsfoxfb8
jcrYHKw9cPsx2BWg645KbImhT1L6iISfY0OKkUmDLCyUUV8uhbbnKScF8OK01HVW
XWeZo9LB9gM8SmVJMljHsko+4JCiOq8+99Jm/GjVCZmW69tQ2fFfjeF3Nh9v32uI
+DcGlFP33Htp7oynOJxyfqGK1RfKjkJSZEQKODNHKJ7Q+2LRkA85xs3yfHkUkBX8
AjNI82r1SqAodhCgw8k19yeawvsAx8eu0h6Cal5UQzHlnAYEjfh+flbIDJv7YAZX
Nh5lpn71LBBGCytCI/MvnsmUtcor7A==
=tLyy
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2024-08-29' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-driver (xe-core) Changes:
- Require BMG scanout buffers to be 64k physically aligned (Maarten)
Core (drm) Changes:
- Introducing Xe2 ccs modifiers for integrated and discrete graphics (Juha-Pekka)
Driver Changes:
- General cleanup and more work moving towards intel_display isolation (Jani)
- New display workaround (Suraj)
- Use correct cp_irq_count on HDCP (Suraj)
- eDP PSR fix when CRC is enabled (Jouni)
- Fix DP MST state after a sink reset (Imre)
- Fix Arrow Lake GSC firmware version (John)
- Use chained DSBs for LUT programming (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtCC0lJ0Zf3MoSdW@intel.com
- Fix OA format masks which were breaking build with gcc-5
Cross-subsystem Changes:
Driver Changes:
- Use dma_fence_chain_free in chain fence unused as a sync (Matthew Brost)
- Refactor hw engine lookup and mmio access to be used in more places
(Dominik, Matt Auld, Mika Kuoppala)
- Enable priority mem read for Xe2 and later (Pallavi Mishra)
- Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
- Fix refcount and speedup devcoredump (Matthew Brost)
- Add performance tuning changes to Xe2 (Akshata, Shekhar)
- Fix OA sysfs entry (Ashutosh)
- Add first GuC firmware support for BMG (Julia)
- Bump minimum GuC firmware for platforms under force_probe to match LNL
and BMG (Julia)
- Fix access check on user fence creation (Nirmoy)
- Add/document workarounds for Xe2 (Julia, Daniele, John, Tejas)
- Document workaround and use proper WA infra (Matt Roper)
- Fix VF configuration on media GT (Michal Wajdeczko)
- Fix VM dma-resv lock (Matthew Brost)
- Allow suspend/resume exec queue backend op to be called multiple times
(Matthew Brost)
- Add GT stats to debugfs (Nirmoy)
- Add hwconfig to debugfs (Matt Roper)
- Compile out all debugfs code with ONFIG_DEUBG_FS=n (Lucas)
- Remove dead kunit code (Jani Nikula)
- Refactor drvdata storing to help display (Jani Nikula)
- Cleanup unsused xe parameter in pte handling (Himal)
- Rename s/enable_display/probe_display/ for clarity (Lucas)
- Fix missing MCR annotation in couple of registers (Tejas)
- Fix DGFX display suspend/resume (Maarten)
- Prepare exec_queue_kill for PXP handling (Daniele)
- Fix devm/drmm issues (Daniele, Matthew Brost)
- Fix tile and ggtt fini sequences (Matthew Brost)
- Fix crashes when probing without firmware in place (Daniele, Matthew Brost)
- Use xe_managed for kernel BOs (Daniele, Matthew Brost)
- Future-proof dss_per_group calculation by using hwconfig (Matt Roper)
- Use reserved copy engine for user binds on faulting devices
(Matthew Brost)
- Allow mixing dma-fence jobs and long-running faulting jobs (Francois)
- Cleanup redundant arg when creating use BO (Nirmoy)
- Prevent UAF around preempt fence (Auld)
- Fix display suspend/resume (Maarten)
- Use vma_pages() helper (Thorsten)
- Calculate pagefault queue size (Stuart, Matthew Auld)
- Fix missing pagefault wq destroy (Stuart)
- Fix lifetime handling of HW fence ctx (Matthew Brost)
- Fix order destroy order for jobs (Matthew Brost)
- Fix TLB invalidation for media GT (Matthew Brost)
- Document GGTT (Rodrigo Vivi)
- Refactor GGTT layering and fix runtime outer protection (Rodrigo Vivi)
- Handle HPD polling on display pm runtime suspend/resume (Imre, Vinod)
- Drop unrequired NULL checks (Apoorva, Himal)
- Use separate rpm lockdep map for non-d3cold-capable devices (Thomas Hellström)
- Support "nomodeset" kernel command-line option (Thomas Zimmermann)
- Drop force_probe requirement for LNL and BMG (Lucas, Balasubramani)
-----BEGIN PGP SIGNATURE-----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=aT4y
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-08-28' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Fix OA format masks which were breaking build with gcc-5
Cross-subsystem Changes:
Driver Changes:
- Use dma_fence_chain_free in chain fence unused as a sync (Matthew Brost)
- Refactor hw engine lookup and mmio access to be used in more places
(Dominik, Matt Auld, Mika Kuoppala)
- Enable priority mem read for Xe2 and later (Pallavi Mishra)
- Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
- Fix refcount and speedup devcoredump (Matthew Brost)
- Add performance tuning changes to Xe2 (Akshata, Shekhar)
- Fix OA sysfs entry (Ashutosh)
- Add first GuC firmware support for BMG (Julia)
- Bump minimum GuC firmware for platforms under force_probe to match LNL
and BMG (Julia)
- Fix access check on user fence creation (Nirmoy)
- Add/document workarounds for Xe2 (Julia, Daniele, John, Tejas)
- Document workaround and use proper WA infra (Matt Roper)
- Fix VF configuration on media GT (Michal Wajdeczko)
- Fix VM dma-resv lock (Matthew Brost)
- Allow suspend/resume exec queue backend op to be called multiple times
(Matthew Brost)
- Add GT stats to debugfs (Nirmoy)
- Add hwconfig to debugfs (Matt Roper)
- Compile out all debugfs code with ONFIG_DEUBG_FS=n (Lucas)
- Remove dead kunit code (Jani Nikula)
- Refactor drvdata storing to help display (Jani Nikula)
- Cleanup unsused xe parameter in pte handling (Himal)
- Rename s/enable_display/probe_display/ for clarity (Lucas)
- Fix missing MCR annotation in couple of registers (Tejas)
- Fix DGFX display suspend/resume (Maarten)
- Prepare exec_queue_kill for PXP handling (Daniele)
- Fix devm/drmm issues (Daniele, Matthew Brost)
- Fix tile and ggtt fini sequences (Matthew Brost)
- Fix crashes when probing without firmware in place (Daniele, Matthew Brost)
- Use xe_managed for kernel BOs (Daniele, Matthew Brost)
- Future-proof dss_per_group calculation by using hwconfig (Matt Roper)
- Use reserved copy engine for user binds on faulting devices
(Matthew Brost)
- Allow mixing dma-fence jobs and long-running faulting jobs (Francois)
- Cleanup redundant arg when creating use BO (Nirmoy)
- Prevent UAF around preempt fence (Auld)
- Fix display suspend/resume (Maarten)
- Use vma_pages() helper (Thorsten)
- Calculate pagefault queue size (Stuart, Matthew Auld)
- Fix missing pagefault wq destroy (Stuart)
- Fix lifetime handling of HW fence ctx (Matthew Brost)
- Fix order destroy order for jobs (Matthew Brost)
- Fix TLB invalidation for media GT (Matthew Brost)
- Document GGTT (Rodrigo Vivi)
- Refactor GGTT layering and fix runtime outer protection (Rodrigo Vivi)
- Handle HPD polling on display pm runtime suspend/resume (Imre, Vinod)
- Drop unrequired NULL checks (Apoorva, Himal)
- Use separate rpm lockdep map for non-d3cold-capable devices (Thomas Hellström)
- Support "nomodeset" kernel command-line option (Thomas Zimmermann)
- Drop force_probe requirement for LNL and BMG (Lucas, Balasubramani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/wd42jsh4i3q5zlrmi2cljejohdsrqc6hvtxf76lbxsp3ibrgmz@y54fa7wwxgsd
In order to better handle the necessary DSB DEwake tricks let's
switch over to using a chained DSB for the actual LUT programming.
The CPU will start 'dsb_color_commit', which in turn will start the
chained 'dsb_color_vblank'.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-15-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
We'll soon utilize several DSBs during the commit. To that end
rename the current crtc_state->dsb to crtc_state->dsb_color_vblank
to better reflect its role (color managemnent stuff programmed during
vblank).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-14-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
In order to avoid the DSB keeping the DEwake permanently
asserted we must clear DSB_PMCTRL_2.DSB_FORCE_DEWAKE once
we are done. For good measure do the same for
DSB_PMCTRL.DSB_ENABLE_DEWAKE.
Experimentally this doens't seem to be actually necessary
(unlike with DSB_FORCE_DEWAKE). That is, the DSB_ENABLE_DEWAKE
doesn't seem to do anything whenever the DSB is not active.
But I'd hate to waste a ton of power in case there I'm wrong
and there is some way DEwake could remaing asserted. One extra
register write is a small price to pay for some peace of mind.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-13-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Allow intel_dsb_chain() to start the chained DSB
at start of the undelaye vblank. This is slightly
more involved than simply setting the bit as we
must use the DEwake mechanism to eliminate pkgC
latency.
And DSB_ENABLE_DEWAKE itself is problematic in that
it allows us to configure just a single scanline,
and if the current scanline is already past that
DSB_ENABLE_DEWAKE won't do anything, rendering the
whole thing moot.
The current workaround involves checking the pipe's current
scanline with the CPU, and if it looks like we're about to
miss the configured DEwake scanline we set DSB_FORCE_DEWAKE
to immediately assert DEwake. This is somewhat racy since the
hardware is making progress all the while we're checking it on
the CPU.
We can make things less racy by chaining two DSBs and handling
the DSB_FORCE_DEWAKE stuff entirely without CPU involvement:
1. CPU starts the first DSB immediately
2. First DSB configures the second DSB, including its dewake_scanline
3. First DSB starts the second w/ DSB_WAIT_FOR_VBLANK
4. First DSB asserts DSB_FORCE_DEWAKE
5. First DSB waits until we're outside the dewake_scanline-vblank_start
window
6. First DSB deasserts DSB_FORCE_DEWAKE
That will guarantee that the we are fully awake when the second
DSB starts to actually execute.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-12-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
In order to handle the DEwake tricks without involving
the CPU we need a mechanism by which one DSB can start
another one. Add a basic function to do so. We'll extend
it later with additional code to actually deal with
DEwake.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-11-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Add functions to emit a DSB scanline window wait instructions.
We can either wait for the scanline to be IN the window
or OUT of the window.
The hardware doesn't handle wraparound so we must manually
deal with it by swapping the IN range to the inverse OUT
range, or vice versa.
Also add a bit of paranoia to catch the edge case of waiting
for the entire frame. That doesn't make sense since an IN
wait would be a nop, and an OUT wait would imply waiting
forever. Most of the time this also results in both scanline
ranges (original and inverted) to have lower=upper+1
which is nonsense from the hw POV.
For now we are only handling the case where the scanline wait
happens prior to latching the double buffered registers during
the commit (which might change the timings due to LRR/VRR/etc.)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-10-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Adjust the code that determines the correct DSB_CHICKEN value
to be usable for use within DSB commands themselves. Ie.
precompute it based on our knowledge of what the hardware state
(VRR vs. not mainly) will be at the time of the commit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-9-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
When determining various scanlines for DSB use we should take into
account whether VRR is active at the time when the DSB uses said
scanline information. For now all DSB scanline usage occurs prior
to the actual commit, so we only need to care about the state of
VRR at that time.
I've decided to move intel_crtc_scanline_to_hw() in its entirety
to the DSB code as it will also need to know the actual state
of VRR in order to do its job 100% correctly.
TODO: figure out how much of this could be moved to some
more generic place and perhaps be shared with the CPU
vblank evasion code/etc...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-8-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Currently we calculate the DEwake scanline based on
the delayed vblank start, while in reality it should be computed
based on the undelayed vblank start (as that is where the DSB
actually starts). Currently it doesn't really matter as we
don't have any vblank delay configured, but that may change
in the future so let's be accurate in what we do.
We can also remove the max() as intel_crtc_scanline_to_hw()
can deal with negative numbers, which there really shouldn't
be anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-7-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Relocate intel_dsb_dewake_scanline() and dsb_chicken() upwards
in the file. I need to reuse these while emitting DSB
commands, and I'd like to keep the DSB command emission
stuff more or less grouped together in the file.
Also drop the intel_ prefix from intel_dsb_dewake_scanline() since
it's all internal stuff and thus doesn't need so much namespacing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-6-ville.syrjala@linux.intel.com
Reviewed-by: Animesh manna <animesh.manna@intel.com>
Currently we switch from out software idea of a scanline
to the hw's idea of a scanline during the commit phase in
_intel_dsb_commit(). While that is slightly easier due to
fastsets fiddling with the timings, we'll also need to
generate proper hw scanline numbers already when emitting
DSB scanline wait instructions. So this approach won't
do in the future. Switch to hw scanline numbers earlier.
Also intel_dsb_dewake_scanline() itself already makes
some assumptions about VRR that don't take into account
VRR toggling during fastsets, so technically delaying
the sw->hw conversion doesn't even help us.
The other reason for delaying the conversion was that we
are using intel_get_crtc_scanline() during intel_dsb_commit()
which gives us the current sw scanline. But this is pretty
low level stuff anyway so just using raw PIPEDSL reads seems
fine here, and that of course gives us the hw scanline
directly, reducing the need to do so many conversions.
v2: Return the non-hw scanline from intel_dsb_dewake_scanline()
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624191032.27333-5-ville.syrjala@linux.intel.com
Enable all DSB error/fault interrupts so that we can see if
anything goes terribly wrong.
v2: Pass intel_display to DISPLAY_VER() (Jani)
Drop extra '/' from drm_err() for consistency
v3: Reorder the irq handler a bit
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625135852.13431-1-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
On ilk/snb the pipe may be configured to place the LUT before or
after the CSC depending on various factors, but as there is only
one LUT (no split mode like on IVB+) we only advertise a gamma_lut
and no degamma_lut in the uapi to avoid confusing userspace.
This can cause a problem during readout if the VBIOS/GOP enabled
the LUT in the pre CSC configuration. The current code blindly
assigns the results of the readout to the degamma_lut, which will
cause a failure during the next atomic_check() as we aren't expecting
anything to be in degamma_lut since it's not visible to userspace.
Fix the problem by assigning whatever LUT we read out from the
hardware into gamma_lut.
Cc: stable@vger.kernel.org
Fixes: d2559299d3 ("drm/i915: Make ilk_read_luts() capable of degamma readout")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11608
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710124137.16773-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Instead of just smashing jiffies into a GUID, use guid_gen() to generate
RFC 4122 compliant GUIDs.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Instead of just smashing jiffies into a GUID, use guid_gen() to generate
RFC 4122 compliant GUIDs.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The kernel has a guid_t type for GUIDs. Switch to using it, but avoid
any functional changes here.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Battlemage platform is sufficiently tested and found stable. CI is also
pretty stable. Remove the force_probe requirement to enable the platform
support by default.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828082152.3194814-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Make sure that ggtt_node_remove() is invoked only if both node and ggtt
are not null. Move the null checks to the caller function
xe_ggtt_node_remove().
v2: Move null check below declarations (Tejas)
Fixes: 919bb54e98 ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828092229.3606503-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The function parameter out can be used directly instead of assigning it
to a temporary u64 variable first.
Remove the local variable tmp2 and use the parameter out directly as the
divisor in do_div() to remove the following Coccinelle/coccicheck
warning reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240710210034.796032-2-thorsten.blum@toblux.com
Rather than hooking up the PM domains through devm_pm_opp_attach_genpd()
and manage the device-link, let's avoid the boilerplate-code by converting
into dev_pm_domain_attach|detach_list.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240723144610.564273-2-ulf.hansson@linaro.org
Syncpoint IRQs are currently requested in a code path that runs
during resume. Due to this, we get multiple overlapping registered
interrupt handlers as host1x is suspended and resumed.
Rearrange interrupt code to only request IRQs during initialization.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531070719.2138-1-cyndis@kapsi.fi
Set the timeout of all drm-ci jobs to 1h30m since
some jobs takes more than 1 hour to complete.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820070818.1124403-1-vignesh.raman@collabora.com
I haven't been able to follow or review the work on the driver for some
time now and I don't see the situation improving anytime soon. I'd like
to continue being listed as a reviewer.
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Acked-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240525142637.82586-1-melissa.srw@gmail.com
For non-d3cold-capable devices we'd like to be able to wake up the
device from reclaim. In particular, for Lunar Lake we'd like to be
able to blit CCS metadata to system at shrink time; at least from
kswapd where it's reasonable OK to wait for rpm resume and a
preceding rpm suspend.
Therefore use a separate lockdep map for such devices and prime it
reclaim-tainted.
v2:
- Rename lockmap acquire- and release functions. (Rodrigo Vivi).
- Reinstate the old xe_pm_runtime_lockdep_prime() function and
rename it to xe_rpm_might_enter_cb(). (Matthew Auld).
- Introduce a separate xe_pm_runtime_lockdep_prime function
called from module init for known required locking orders.
v3:
- Actually hook up the prime function at module init.
v4:
- Rebase.
v5:
- Don't use reclaim-safe RPM with sriov.
Cc: "Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Cc: "Auld, Matthew" <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826143450.92511-1-thomas.hellstrom@linux.intel.com
Remove TTM_TT_FLAG_CLEARED_ON_FREE now that XE stopped using this
flag.
This reverts commit decbfaf06d.
Cc: Christian König <christian.koenig@amd.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828083635.23601-2-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This optimization relied on having to clear CCS on allocations.
If there is no need to clear CCS on allocations then this would mostly
help in reducing CPU utilization.
Revert this patch at this moment because of:
1 Currently Xe can't do clear on free and using a invalid ttm flag,
TTM_TT_FLAG_CLEARED_ON_FREE which could poison global ttm pool on
multi-device setup.
2 Also for LNL CPU:WB doesn't require clearing CCS as such BO will
not be allowed to bind with compression PTE. Subsequent patch will
disable clearing CCS for CPU:WB BOs for LNL.
This reverts commit 2368306180.
Cc: Christian König <christian.koenig@amd.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828083635.23601-1-nirmoy.das@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
For CCS formats on affected platforms, CCS can be used freely, but
display engine requires a multiple of 64k physical pages. No other
changes are needed.
At the BO creation time we don't know if the BO will be used for CCS
or not. If the scanout flag is set, and the BO is a multiple of 64k,
we take the safe route and force the physical alignment of 64k pages.
If the BO is not a multiple of 64k, or the scanout flag was not set
at BO creation, we reject it for usage as CCS in display. The physical
pages are likely not aligned correctly, and this will cause corruption
when used as FB.
The scanout flag and size being a multiple of 64k are used together
to enforce 64k physical placement.
VM_BIND is completely unaffected, mappings to a VM can still be aligned
to 4k, just like for normal buffers.
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170117.327709-3-maarten.lankhorst@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some plane formats have been designed to require 64k physical alignment.
By returning whether this is the case for certain formats, we do not
need to hardcode this check inside Xe.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170117.327709-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Need to take some Xe bo definition in here before
we can add the BMG display 64k aligned size restrictions.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Setting 'nomodeset' on the kernel command line disables all graphics
drivers with modesetting capabilities, leaving only firmware drivers,
such as simpledrm or efifb.
Most DRM drivers automatically support 'nomodeset' via DRM's module
helper macros. In xe, which uses regular module_init(), manually call
drm_firmware_drivers_only() to test for 'nomodeset'. Do not register
the driver if set.
v2:
- use xe's init table (Lucas)
- do NULL test for init/exit functions
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827121003.97429-1-tzimmermann@suse.de
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This reverts commit 8ebb1fc2e6.
The panel should be handled through the samsung-atna33xc20 driver for
correct power up timings. Otherwise the backlight does not work correctly.
We have existing users of this panel through the generic "edp-panel"
compatible (e.g. the Qualcomm X1E80100 CRD), but the screen works only
partially in that configuration: It works after boot but once the screen
gets disabled it does not turn on again until after reboot. It behaves the
same way with the default "conservative" timings, so we might as well drop
the configuration from the panel-edp driver. That way, users with old DTBs
will get a warning and can move to the new driver.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240715-x1e80100-crd-backlight-v2-2-31b7f2f658a3@linaro.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmbK2B8eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFwkH/10QpUgzIfbFKbF+
5hwcvaqS5myxWwJ4PjN0eR1qGE6RzVO0Tb24+TVql+7pxu+iWm1kYgC3+/T5xJsP
ECAszdmPWSco1xaHrh2y3PyCJjaBiqFbIxdjPp7odjDpG9qarbcty8YpWs44u/gd
RDXzHUuScEShBhEt0ZhvE1pIDL8jJ8JL3yqOMZ+XaDxtJbjaHw4GHp8efxlBWc8N
jZKIVJi22q5NWG5T0tGtPWwzCm0ewA/JNMTEvE9leoSoAgO85NZ0ivxMC76q/tbj
BrYk5KnzfhJs4b/n/KtIwWaLTgLyXKGqHMaMq8sbXtp410aUdgnRJO2cl3fI+1vc
vxQfAfk=
=RemI
-----END PGP SIGNATURE-----
Merge v6.11-rc5 into drm-next
amdgpu pr conconflicts due to patches cherry-picked to -fixes, I might
as well catch up with a backmerge and handle them all. Plus both misc
and intel maintainers asked for a backmerge anyway.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
UAPI Changes:
- Limit the number of relocations to INT_MAX (Tvrtko)
Only impact should be synthetic tests.
Driver Changes:
- Fix for #11396: GPU Hang and rcs0 reset on Cherrytrail platform
- Fix Virtual Memory mapping boundaries calculation (Andi)
- Fix for #11255: Long hangs in buddy allocator with DG2/A380 without
Resizable BAR since 6.9 (David)
- Mark the GT as dead when mmio is unreliable (Chris, Andi)
- Workaround additions / fixes for MTL, ARL and DG2 (John H, Nitin)
- Enable partial memory mapping of GPU virtual memory (Andi, Chris)
- Prevent NULL deref on intel_memory_regions_hw_probe (Jonathan, Dan)
- Avoid UAF on intel_engines_release (Krzysztof)
- Don't update PWR_CLK_STATE starting Gen12 (Umesh)
- Code and dmesg cleanups (Andi, Jesus, Luca)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZshcfSqgfnl8Mh4P@jlahtine-mobl.ger.corp.intel.com