A few more DPM fixes based on user testing.
* 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/dpm: implement vblank_too_short callback for si
drm/radeon/dpm: implement vblank_too_short callback for cayman
drm/radeon/dpm: implement vblank_too_short callback for btc
drm/radeon/dpm: implement vblank_too_short callback for evergreen
drm/radeon/dpm: implement vblank_too_short callback for 7xx
drm/radeon/dpm: add checks against vblank time
drm/radeon/dpm: add helper to calculate vblank time
drm/radeon: remove stray line in old pm code
drm/radeon/dpm: fix display_gap programming on rv7xx
drm/radeon/dpm: implement force performance level for TN
drm/radeon/dpm: implement force performance level for ON/LN
drm/radeon/dpm: implement force performance level for SI
drm/radeon/dpm: implement force performance level for cayman
drm/radeon/dpm: implement force performance levels for 7xx/eg/btc
drm/radeon/dpm: add infrastructure to force performance levels
drm/radeon: fix surface setup on r1xx
drm/radeon: add support for 3d perf states on older asics
drm/radeon: set default clocks for SI when DPM is disabled
Two minor fixes for regressions.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nvc0/gr: fix gpc firmware regression
drm/nouveau: fix minor thinko causing bo moves to not be async on kepler
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check if we can switch the mclk during the vblank time otherwise
we may get artifacts on the screen when the mclk changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the vblank time is too short to adjust mclk,
assume multiple displays (no mclk adjustments).
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"drm/nve0-/gr: some new gpc registers can have multiple copies"
5ee86c4190 caused a regression for nvc0, because the bit indicating last
transfer has occured was no longer set, resulting in random system lockups.
Reported-by: Ronald Uitermark <ronald645@gmail.com>
Tested-by: Ronald Uitermark <ronald645@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This allows you to force specific power levels within a power
state. Due to hardware restrictions between generations, the
interface is limited to the following 3 selections:
auto: all levels enabled
low: forced to the lowest power level
high: forced to the highest power level
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
r1xx asics have a slightly different surface register
setup compared to newer asics. There is no specific
enable bit for macro tiling, rather, to disable macro
tiling, you need to set the surface pitch to 0.
With this fixed, the special rn50 handling can go.
Noticed-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain older rv770 asics have both a performance and
a 3D performance state rather than just multiple performance
levels in the state power state. The current code would
select the performance state rather than the 3D performance
state when the "performance" profile was selected. This change
switches to the "balanced" profile by default which ends up being
the internal performance profile. When the user selects the
"performance" profile, it selects the internal 3D performance
state so the user can select the higher performance modes.
For most asics this changes nothing. For certain rv770 asics
with static performance and 3D performance states, this allows
you to select between then using by selecting the "balanced"
and "performance" dpm profiles.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix patching of vddc values for SI and enable manually forcing
clocks to default levels as per NI.
This improves the out of the box performance with SI asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- GF117 acceleration support
- GK110 acceleration-with-blob-ucode support, and initial work towards
fixing our own ucode to be suitable.
- Large cleanups of fermi/kepler context handling
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (22 commits)
drm/nva3/disp: Fix HDMI audio regression
drm/nv50-/disp: Use output specific mask in interrupt
drm/nouveau: use vmalloc for pgt allocation
drm/nvc0-/gr: remove some more of the hardcoded register writes
drm/nvc0-/gr: factor out yet more unknown magic into versioned functions
drm/nvd7/devinit: use fermi class, not tesla
drm/nvf0-/gr: ctxsw scratch reg count got bumped to 16
drm/nvc0-/gr: remove hardcoding of UNK count/mask in GPCCS ucode
drm/nvf0/gr: build cs ucode for GK110
drm/nvc0-/gr: extend one of the magic calculations for >4 GPCs
drm/nvf0/gr: fix ddx shaders locking up on me
drm/nvc0/devinit: minor typo
drm/nvf0/gr: enable support, if external cs ucode is available
drm/nvf0/gr: magic sequence that makes PGRAPH come out of hiding
drm/nvf0/ce: enable support
drm/nvf0/fifo: enable support
drm/nvd7/gr: initial support
drm/nvc0-/gr: generate cs register lists from grctx data
drm/nvc0-/gr: tpc regs a subset of gpc, add separate list for gpc/unk regs
drm/nve0-/gr: some new gpc registers can have multiple copies
...
We can use prime helpers instead.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of using the dma_buf functionality for GEM CMA, we can use prime
helpers if we can provide low-level hook functions for GEM CMA.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds to call low-level mmap() from prime helpers.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The drm_gem_map_detach() can be called with sgt is NULL.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is final pull request for 3.11. This resolves some memory leak
issues, and includes some code and dt document file cleanups; just
removed unnecessary descriptions.
And the patch work for enhancing hdmiphy driver isn't in progress so
this patch may go to 3.12.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: remove duplicated error routine and unnecessary assign
drm/exynos: fix pages allocation size in lowlevel_buffer_allocate
drm/exynos: use drm_calloc_large when allocates pointer array
drm/exynos: add error check routine in exynos_drm_open
drm/exynos: initialize the buf_num in vp_video_buffer
drm/exynos: remove dead code in vidi_power_on
drm/exynos: fix not to remain exynos_gem_obj as a leak
of/documentation: Update hpd gpio property for exynos_hdmi
The DU requires a 16 pixels pitch alignement. Make sure dumb buffers are
allocated with the correct pitch, and validate the pitch when creating
frame buffers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is the nva3 counterpart to commit beba44b17 (drm/nv84/disp: Fix
HDMI audio regression). The regression happened as a result of
refactoring in commit 8e9e3d2de (drm/nv84/disp: move hdmi control into
core).
Reported-and-tested-by: Max Baldwin <archerseven@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
The commit
commit 476e84e126
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Mon Feb 11 09:24:23 2013 +1000
drm/nv50-/disp: initial supervisor support for off-chip encoders
changed the write mask in one of the interrupt functions for on-chip encoders,
causing a regression in certain VGA dual-head setups. This commit reintroduces
the mask thus resolving the regression
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66129
Reported-and-Tested-by: Yves-Alexis <corsac@debian.org>
Cc: stable@vger.kernel.org [3.9+]
CC: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Page tables on nv50 take 48kB, which can be hard to allocate in one piece.
Let's use vmalloc.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@vger.kernel.org [3.7+]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NVC1/NVD9 are the only chipsets that should have anything different
happen on them after this. We previously weren't doing these
register modifications, and NVIDIA do.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GK110 exposes more than one, and needs to be dealt with in the ctxsw
ucode just like the TPC sets are.
Broadcast is at +0xe00.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This adds suspend/resume and hibernate support for the KMS driver. it evicts
all the objects, turns off the outputs, and waits for the hw to go idle,
On resume, it resets the memslots, rings, monitors object and forces modeset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This splits the creation of the monitors config object out so we can
re-use it across suspend/resume later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support for a default of 4 heads, with a command line
parameter to change the default number.
It also overhauls the modesetting code to handle this case properly,
and send the correct things to the hardware at the right time.
Signed-off-by: Dave Airlie <airlied@redhat.com>
qxl has a feature to allow the userspace driver do arbitrary resizes
when the viewer resizes, this fixes it by removing unnecessary code
from the kernel side.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull trivial tree updates from Jiri Kosina:
"The usual stuff from trivial tree"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
treewide: relase -> release
Documentation/cgroups/memory.txt: fix stat file documentation
sysctl/net.txt: delete reference to obsolete 2.4.x kernel
spinlock_api_smp.h: fix preprocessor comments
treewide: Fix typo in printk
doc: device tree: clarify stuff in usage-model.txt.
open firmware: "/aliasas" -> "/aliases"
md: bcache: Fixed a typo with the word 'arithmetic'
irq/generic-chip: fix a few kernel-doc entries
frv: Convert use of typedef ctl_table to struct ctl_table
sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
doc: clk: Fix incorrect wording
Documentation/arm/IXP4xx fix a typo
Documentation/networking/ieee802154 fix a typo
Documentation/DocBook/media/v4l fix a typo
Documentation/video4linux/si476x.txt fix a typo
Documentation/virtual/kvm/api.txt fix a typo
Documentation/early-userspace/README fix a typo
Documentation/video4linux/soc-camera.txt fix a typo
lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
...
This fixes gpu reset on my gm45 - without this patch the bsd thing is
forever stuck since the seqno updates never reach the status page.
Tbh I have no idea how this ever worked without rewriting the hws
registers after a gpu reset.
To satisfy my OCD also give the functions a bit more consistent names:
- Use status_page everywhere, also for the physical addressed one.
- Use init for the allocation part and setup for the register setup
part consistently.
Long term I'd really like to share the hw init parts completely
between gpu reset, resume and driver load, i.e. to call
i915_gem_init_hw instead of the individual pieces we might need.
v2: Add the missing paragraph to the commit message about what bug
exactly this patch here fixes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65495
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: lu hua <huax.lu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There were duplicated error handling routines during allocating
pages in lowlevel_buffer_allocate() and g2d_userptr_get_dma_addr().
Also unnecessary NULL assignments for variable used not any more
are removed from g2d_userptr_get_dma_addr() and
g2d_userptr_put_dma_addr().
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When IOMMU is not supported, buf->pages has to be allocated to
assign the result of phys_to_page() which return type is struct
page *. So it is sufficient to allocate buf->pages with the size
of multiple struct page pointers.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
If the type of object is pointer array, the drm_calloc_large() is
more suitable than kzalloc() for its allocation function. And uses
drm_free_large() instead of kfree() also.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When the exynos_drm_subdrv_open() returns error, the file_priv
should be released and file->driver_priv set to NULL.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The buf_num in vp_video_buffer() should be 1 or 2, but it is not
initialized, and only set to 2 in NV12M or NV12MT cases.
So this patch initializes the buf_num with 1 as default.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The type of input parameter enable is bool, so it does not need
to check whether true or false.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The exynos_drm_gem_create() only calls drm_gem_object_release()
when exynos_drm_alloc_buf() is failed, and exynos_gem_obj remains
as a leak, which is allocated in exynos_drm_gem_init().
So this patch fixes it not to remain as a leak.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
seq of a trace point is unsigned int but print format was %d. So
it fixes the format as %u.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There are missing parts to handle error in drm_open_helper().
The priv->minor, assigned by idr_find() which can return NULL,
should be checked whether it is NULL or not before referencing it.
put_pid(), drm_gem_release(), and drm_prime_destory_file_private()
should be called when error happens after their pair functions are
called. If an error occurs after executing dev->driver->open()
which allocates driver specific per-file private data, then the
private data should be released.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If raw_edid of drm_edid_block_vaild() is null, it will crash, so
checking in bad label is removed and instead assertion is added at
the top of the function.
The type of return for the function is bool, so it fixes to return
true and false instead of 1 and 0.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Convert drivers/gpu/drm class to use dev_pm_ops for power management and
remove Legacy PM ops hooks. With this change, drm class registers
suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy
class->suspend/resume. When __device_suspend() runs call-backs, it will
find class->pm ops for the drm class.
drm_class_suspend() hook calls driver legacy ops with the state information.
e.g: drm_class_suspend() calls into driver suspend routines
via drm_dev->driver->suspend(drm_dev, state).
Once drm_class_suspend() is converted to dev_pm_ops, it will no longer
have access to pm_transition which it has to pass into driver legacy
suspend calls. A new freeze and suspend hooks are added to address the not
having access to the state information. The new freeze and suspend hooks
simply call __drm_class_suspend() with the appropriate pm state information.
__drm_class_suspend() is the original suspend hook with a new name.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pile of fixes for 3.11. A bit large in patch count, but that's simply due
to two fixes being split up into really small parts. Also I've included a
few more vlv patches than I'd have included for other platforms. But since
vlv is officially supported for the first time only in 3.11 that shouldn't
result in unbearable risks.
Highlights:
- ghost eDP fixes for hsw from Paulo
- fix PCH detection in virtualized enviroments (Rui Guo)
- duct-tape dma sg construction when swiotlb is in use (Konrad), dupe with
a patch in your drm-fixes branch
- fix sdvo hotplug on i965g
- tune down a bunch of dmesg ERRORs which can be hit under normal
conditions
- detect invalid pitches for tiled scanout buffers (Chris)
- a pile of vlv fixes from Ville: rps improvements, fixes for the dpll
LPF, fixup the sprite mmio offsets
- fix context size on hsw (Ben)
- locking fixes for the hotplug code, specifically the storm handling
- fix get_config on CPT (Xiong Zhang)
- Fix the domain tracking when an unlocked seqno wait was interrupt
(Chris), this seems to explain tons of little corruption bugs in the
ddx. Chris also added a nice igt to exercise this.
- work around stack-corrupting vnsprintf in our error state dumper
* tag 'drm-intel-fixes-2013-07-03' of git://people.freedesktop.org/~danvet/drm-intel: (39 commits)
drm/i915: Don't try to tear down the stolen drm_mm if it's not there
drm/i915: Break up the large vsnprintf() in print_error_buffers()
drm/i915: Refactor the wait_rendering completion into a common routine
drm/i915: Only clear write-domains after a successful wait-seqno
drm/i915: correct intel_dp_get_config() function for DevCPT
drm/i915: fix hpd interrupt register locking
drm/i915: fold the no-irq check into intel_hpd_irq_handler
drm/i915: fold the queue_work into intel_hpd_irq_handler
drm/i915: fold the hpd_irq_setup call into intel_hpd_irq_handler
drm/i915: s/hotplug_irq_storm_detect/intel_hpd_irq_handler/
drm/i915: close tiny race in the ilk pcu even interrupt setup
drm/i915: fix locking around ironlake_enable|disable_display_irq
drm/i915: Fix context sizes on HSW
drm/i915: Fix VLV sprite register offsets
Revert "drm/i915: Don't use the HDMI port color range bit on Valleyview"
drm/i915: s/LFP/LPF in DPIO PLL register names
drm/i915: Fix VLV PLL LPF coefficients for DAC
drm/i915: Jump to at least RPe on VLV when increasing the GPU frequency
drm/i915: Don't increase the GPU frequency from the delayed VLV rps timer
drm/i915: GEN6_RP_INTERRUPT_LIMITS doesn't seem to exist on VLV
...
A few more DPM fixes.
* 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/sumo: implement support for disable_gfx_power_gating_in_uvd flag
drm/radeon/tn: disable PG when changing UVD clocks
drm/radeon/sumo: disable PG when changing UVD clocks
drm/radeon/aruba: disable additional rlc features
drm/radeon: fix endian bug in radeon_atom_get_mclk_range_table()
drm/radeon/dpm: fix compilation with certain versions of gcc
drm/radeon/dpm: clarify debugfs warning
The usual drm driver has tons of different drm_mm memory managers so the drm
error message in dmesg is pretty useless. WARN instead so that we have the full
backtrace.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In
commit 3a359f0b21
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Apr 20 12:08:11 2013 +0200
drm/mm: fix dump table BUG
I've failed to fix both instances of the regression introduced in
commit 9e8944ab56
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Nov 15 11:32:17 2012 +0000
drm: Introduce an iterator over holes in the drm_mm range manager
Patch this up in the same way by extracting the hole debug logic
into it's own function, since that'll also clarify the logic a bit.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In
commit da34242e5e
Author: YoungJun Cho <yj44.cho@samsung.com>
Date: Wed Jun 26 10:21:42 2013 +0900
drm/prime: add return check for dma_buf_fd
the failure case handling was fixed up. But in the case when we
already had the buffer exported it changed the return value:
Previously we've return 0 on success, now we return the fd.
This ABI change has been caught by i-g-t/prime_self_import/with_one_bo.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66436
Cc: YoungJun Cho <yj44.cho@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: lu hua <huax.lu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This replaceable mainboard only has a VGA-out, yet it claims to also have
a connected LVDS header.
Addresses https://bugs.freedesktop.org/show_bug.cgi?id=65256
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reported-by: Cornel Panceac <cpanceac@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <annndddrr@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This replaceable mainboard only has a VGA-out, yet it claims to also have
a connected LVDS header.
Addresses https://bugs.freedesktop.org/show_bug.cgi?id=63860
[jani.nikula@intel.com: use DMI_EXACT_MATCH for board name.]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reported-by: <annndddrr@gmail.com>
Cc: Cornel Panceac <cpanceac@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull VFS patches (part 1) from Al Viro:
"The major change in this pile is ->readdir() replacement with
->iterate(), dealing with ->f_pos races in ->readdir() instances for
good.
There's a lot more, but I'd prefer to split the pull request into
several stages and this is the first obvious cutoff point."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (67 commits)
[readdir] constify ->actor
[readdir] ->readdir() is gone
[readdir] convert ecryptfs
[readdir] convert coda
[readdir] convert ocfs2
[readdir] convert fatfs
[readdir] convert xfs
[readdir] convert btrfs
[readdir] convert hostfs
[readdir] convert afs
[readdir] convert ncpfs
[readdir] convert hfsplus
[readdir] convert hfs
[readdir] convert befs
[readdir] convert cifs
[readdir] convert freevxfs
[readdir] convert fuse
[readdir] convert hpfs
reiserfs: switch reiserfs_readdir_dentry to inode
reiserfs: is_privroot_deh() needs only directory inode, actually
...
For chips without debugfs dpm support say that it's not
implemented rather than not supported to avoid confusion
about DPM support in general.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Every other place properly checks whether we've managed to set
up the stolen allocator at boot-up properly, with the exception
of the cleanup code. Which results in an ugly
*ERROR* Memory manager not clean. Delaying takedown
at module unload time since the drm_mm isn't initialized at all.
v2: While at it check whether the stolen drm_mm is initialized instead
of the more obscure stolen_base == 0 check.
v3: Fix up the logic. Also we need to keep the stolen_base check in
i915_gem_object_create_stolen_for_preallocated since that can be
called before stolen memory is fully set up. Spotted by Chris Wilson.
v4: Readd the conversion in i915_gem_object_create_stolen_for_preallocated,
the check is for the dev_priv->mm.gtt_space drm_mm, the stolen
allocatot must already be initialized when calling that function (if
we indeed have stolen memory).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65953
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: lu hua <huax.lu@intel.com> (v3)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There is no reason to return "int" as this function never fails.
Furthermore, several drivers (ast, sis) already depend on this.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Was disabled due to stability issues on certain boards
caused by the a bug in the parsing of the atom mc reg tables.
That's fixed now so re-enable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was disabled due to stability issues on certain boards
caused by the a bug in the parsing of the atom mc reg tables.
That's fixed now so re-enable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So it appears that I have encountered some bogosity when trying to call
i915_error_printf() with many arguments from print_error_buffers(). The
symptom is that the vsnprintf parser tries to interpret an integer arg
as a character string, the resulting OOPS indicating stack corruption.
Replacing the single call with its 13 format specifiers and arguments
with multiple calls to i915_error_printf() worked fine. This patch goes
one step further and introduced i915_error_puts() to pass the strings
simply.
It may not fix the root cause, but it does prevent my box from dying and
I think helps make print_error_buffers() more friendly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66077
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Harmonise the completion logic between the non-blocking and normal
wait_rendering paths, and move that logic into a common function.
In the process, we note that the last_write_seqno is by definition the
earlier of the two read/write seqnos and so all successful waits will
have passed the last_write_seqno. Therefore we can unconditionally clear
the write seqno and its domains in the completion logic.
v2: Add the missing ring parameter, because sometimes it is good to have
things compile.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the introduction of the non-blocking wait, I cut'n'pasted the wait
completion code from normal locked path. Unfortunately, this neglected
that the normal path returned early if the wait returned early. The
result is that read-only waits may return whilst the GPU is still
writing to the bo.
Fixes regression from
commit 3236f57a01 [v3.7]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Aug 24 09:35:09 2012 +0100
drm/i915: Use a non-blocking wait for set-to-domain ioctl
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66163
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
On DevCPT, the control register for Transcoder DP Sync Polarity is
TRANS_DP_CTL, not DP_CTL.
Without this patch, Many call trace occur on CPT machine with DP monitor.
The call trace is like: *ERROR* mismatch in adjusted_mode.flags(expected X,found X)
v2: use intel-crtc to simple patch, suggested by Daniel.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
[danvet: Extend the encoder->get_config comment to specify that we now
also depend upon intel_encoder->base.crtc being correct. Also bikeshed
s/intel_crtc/crtc/.]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65287
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Our interrupt handler (in hardirq context) could race with the timer
(in softirq context), hence we need to hold the spinlock around the
call to ->hdp_irq_setup in intel_hpd_irq_handler, too.
But as an optimization (and more so to clarify things) we don't need
to do the irqsave/restore dance in the hardirq context.
Note also that on ilk+ the race isn't just against the hotplug
reenable timer, but also against the fifo underrun reporting. That one
also modifies the SDEIMR register (again protected by the same
dev_priv->irq_lock).
To lock things down again sprinkle a assert_spin_locked. But exclude
the functions touching SDEIMR for now, I want to extract them all into
a new helper function (like we do already for pipestate, display
interrupts and all the various gt interrupts).
v2: Add the missing 't' Egbert spotted in a comment.
v3: Actually fix the right misspelled comment (Paulo).
Cc: Egbert Eich <eich@suse.de>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The usual pattern for our sub-function irq_handlers is that they check
for the no-irq case themselves. This results in more streamlined code
in the upper irq handlers.
v2: Rebase on top of the i965g/gm sdvo hpd fix.
Cc: Egbert Eich <eich@suse.de>
Reviewed-by: Egbert Eich <eich@suse.de>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Everywhere the same.
Note that this patch leaves unnecessary braces behind, but the next
patch will kill those all anyway (including the if itself) so I've
figured I can keep the diff a bit smaller.
v2: Rebase on top of the i965g/gm sdvo hpd fix.
Cc: Egbert Eich <eich@suse.de>
Reviewed-by: Egbert Eich <eich@suse.de>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We already have a vfunc for this (and other parts of the hpd storm
handling code already use it).
v2: Rebase on top of the i965g/gm sdvo hpd fix.
Cc: Egbert Eich <eich@suse.de>
Reviewed-by: Egbert Eich <eich@suse.de>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The combination of Paulo's fifo underrun detection code and Egbert's
hpd storm handling code unfortunately made the hpd storm handling code
racy.
To avoid duplicating tricky interrupt locking code over all platforms
start with a bit of refactoring. This patch is the very first step
since in the end the irq storm handling code will handle all hotplug
logic (and so also encapsulate the locking nicely).
v2: Rebase on top of the i965g/gm sdvo hpd fix.
Cc: Egbert Eich <eich@suse.de>
Reviewed-by: Egbert Eich <eich@suse.de>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
By the time we write DEIER in the postinstall hook the interrupt
handler could run any time. And it does modify DEIER to handle
interrupts.
Hence the DEIER read-modify-write cycle for enabling the PCU event
source is racy. Close this races the same way we handle vblank
interrupts: Unconditionally enable the interrupt in the IER register,
but conditionally mask it in IMR. The later poses no such race since
the interrupt handler does not touch DEIMR.
Also update the comment, the clearing has already happened
unconditionally above.
v2: Actually shove the updated comment into the right train^W commit,
as spotted by Paulo.
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The haswell unclaimed register handling code forgot to take the
spinlock. Since this is in the context of the non-rentrant interupt
handler and we only have one interrupt handler it is sufficient to
just grab the spinlock - we do not need to exclude any other
interrupts from running on the same cpu.
To prevent such gaffles in the future sprinkle assert_spin_locked over
these functions. Unfornately this requires us to hold the spinlock in
the ironlake postinstall hook where it is not strictly required:
Currently that is run in single-threaded context and with userspace
exlcuded from running concurrent ioctls. Add a comment explaining
this.
v2: ivb_can_enable_err_int also needs to be protected by the spinlock.
To ensure this won't happen in the future again also sprinkle a
spinlock assert in there.
v3: Kill the 2nd call to ivb_can_enable_err_int I've accidentally left
behind, spotted by Paulo.
Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With updates to the spec, we can actually see the context layout, and
how many dwords are allocated. That table suggests we need 70720 bytes
per HW context. Rounded up, this is 18 pages. Looking at what lives
after the current 4 pages we use, I can't see too much important (mostly
it's d3d related), but there are a couple of things which look scary. I
am hopeful this can explain some of our odd HSW failures.
v2: Make the context only 17 pages. The power context space isn't used
ever, and execlists aren't used in our driver, making the actual total
66944 bytes.
v3: Add a comment to the code. (Jesse & Paulo)
Reported-by: "Azad, Vinit" <vinit.azad@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We forgot to add VLV_DISPLAY_BASE to the VLV sprite registers, which
caused the sprites to not work at all.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The PIPECONF color range bit doesn't appear to be effective, on HDMI
outputs at least. The color range bit in the port register works though,
so let's use it.
I have not yet verified whether the PIPECONF bit works on DP outputs.
This reverts commit 83a2af88f8.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
LPF is short for "low pass filter".
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The current PLL settings produce a rather unstable picture when
I hook up a VLV to my HP ZR24w display via a VGA cable.
According to VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_9, we should
use the the same LPF coefficients for DAC as we do for HDMI and RBR DP.
And indeed that seems to cure the shivers.
v2: Add the name of the relevant document to the commit message
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If the current GPU frquency is below RPe, and we're asked to increase
it, just go directly to RPe. This should provide better performance
faster than letting the frequency trickle up in response to the up
threshold interrupts.
For now just do it for VLV, since that matches quite closely how VLV
used to operate when the rps delayed timer kept things at RPe always.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There's little point in increasing the GPU frequency from the delayed
rps work on VLV. Now when the GPU is idle, the GPU frequency actually
keeps dropping gradually until it hits the minimum, whereas previously
it just ping-ponged constantly between RPe and RPe-1.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I can't find GEN6_RP_INTERRUPT_LIMITS (0xA014) anywhere in VLV docs.
Reading it always returns zero from what I can tell, and eliminating
it doesn't seem to make any difference to the behaviour of the system.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Eliminate the weird inverted logic from the rps new_delay comparison.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It seems that even though Punit reports the frequency change to have
been completed, it still reports the old frequency in the status
register for some time.
So rather than polling for Punit to complete the frequency change after
each request, poll before. This gets rid of the spurious "Punit overrode
GPU freq" messages.
This also lets us continue working while Punit is performing the actual
frequency change. As a result, openarena demo088-test1 timedemo average
fps is increased by ~5 fps, and the slowest frame duration is reduced
by ~25%.
The sysfs cur_freq file always reads the current frequency from Punit
anyway, so having rps.cur_delay be slightly off at times doesn't matter.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Always print both the MHz value and raw register value for rps stuff.
Also kill a somewhat pointless local 'rpe' variable and just use
dev_priv->rps.rpe_delay.
While at it clean up the caps in "GPU" and "Punit" debug messages.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Report back the user error of attempting to setup a CRTC with an invalid
framebuffer pitch. This is trickier than it should be as on gen4, there
is a restriction that tiled surfaces must have a stride less than 16k -
which is less than the largest supported CRTC size.
v2: Fix the limits for gen3
v3: Move check into intel_framebuffer_init() and fix VLV limits. (vsyrjala)
v4: Use idiomatic '>=' for generation checks
References: https://bugs.freedesktop.org/show_bug.cgi?id=65099
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
No need to apply WaForceL3Serialization:vlv twice.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There are legit cases, e.g. when userspace asks for something
impossible. So tune it down to debug output like we do with all other
userspace-triggerable warnings.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66111#c5
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Rebased.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bspec seems to be full of lies, at least it disagress with reality:
Two systems corrobated that SDVO hpd bits are the same as on gen3.
v2: Update comment a bit.
Cc: Arthur Ranyan <arthur.j.runyan@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Alex Fiestas <afiestas@kde.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58405
Cc: stable@vger.kernel.org
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Follow the trend and don't code conditions with platforms but with
features.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/i915_gem.c: In function ‘i915_gem_object_bind_to_gtt’:
drivers/gpu/drm/i915/i915_gem.c:3002:3: warning: format ‘%ld’ expects
argument of type ‘long int’, but argument 5 has type ‘size_t’ [-Wformat]
v2: Use %zu instead of %d. Two char patch, and 100% wrong. (Ville)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Nothing the user (nor we) really can do about this, but upsets a nice
quiet boot.
Note that this happens mostly on SDVs where OEMs obviously haven't had
a chance yet to appropriately trim the output list.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65988
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Amend commit message a bit to clarify a question from Paulo.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Git commit 90797e6d1e
("drm/i915: create compact dma scatter lists for gem objects") makes
certain assumptions about the under laying DMA API that are not always
correct.
On a ThinkPad X230 with an Intel HD 4000 with Xen during the bootup
I see:
[drm:intel_pipe_set_base] *ERROR* pin & fence failed
[drm:intel_crtc_set_config] *ERROR* failed to set mode on [CRTC:3], err = -28
Bit of debugging traced it down to dma_map_sg failing (in
i915_gem_gtt_prepare_object) as some of the SG entries were huge (3MB).
That unfortunately are sizes that the SWIOTLB is incapable of handling -
the maximum it can handle is a an entry of 512KB of virtual contiguous
memory for its bounce buffer. (See IO_TLB_SEGSIZE).
Previous to the above mention git commit the SG entries were of 4KB, and
the code introduced by above git commit squashed the CPU contiguous PFNs
in one big virtual address provided to DMA API.
This patch is a simple semi-revert - were we emulate the old behavior
if we detect that SWIOTLB is online. If it is not online then we continue
on with the new compact scatter gather mechanism.
An alternative solution would be for the the '.get_pages' and the
i915_gem_gtt_prepare_object to retry with smaller max gap of the
amount of PFNs that can be combined together - but with this issue
discovered during rc7 that might be too risky.
Reported-and-Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: Imre Deak <imre.deak@intel.com>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: David Airlie <airlied@linux.ie>
CC: <dri-devel@lists.freedesktop.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In some virtualized environments (e.g. XEN), there is irrelevant ISA bridge in
the system. To work reliably, we should scan trhough all the ISA bridge
devices and check for the first match, instead of only checking the first one.
Signed-off-by: Rui Guo <firemeteor@users.sourceforge.net>
[danvet: Fixup conflict with the num_pch_pll removal. And add
subsystem header to the commit message headline.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Because it's the function that destroys the connector, not the
encoder. And we already have intel_dp_encoder_destroy.
This has annoyed me for a long time.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Zoltan Nyul <zoltan.nyul@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- Various fixes that make surviving concurrent piglit more possible.
- Buffer object deletion no longer synchronous
- Context/register initialisation updates that have been reported to
solve some stability issues (particularly on some problematic GF119
chips)
- Kernel side support for VP2 video decoding engines
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (44 commits)
drm/nvd0-/disp: handle case where display engine is missing/disabled
drm/gr/nvc0-: merge nvc0/nve0 ucode, and use cpp instead of m4
drm/nouveau/bsp/nv84: initial vp2 engine implementation
drm/nouveau/vp/nv84: initial vp2 engine implementation
drm/nouveau/core: xtensa engine base class implementation
drm/nouveau/vdec: fork vp3 implementations from vp2
drm/nouveau/core: move falcon class to engine/
drm/nouveau/kms: don't fail if there's no dcb table entries
drm/nouveau: remove limit on gart
drm/nouveau/vm: perform a bar flush when flushing vm
drm/nvc0/gr: cleanup register lists, and add nvce/nvcf to switches
drm/nvc8/gr: update initial register/context values
drm/nvc4/gr: update initial register/context values
drm/nvc1/gr: update initial register/context values
drm/nvc3/gr: update initial register/context values
drm/nvc0/gr: update initial register/context values
drm/nvd9/gr: update initial register/context values
drm/nve4/gr: update initial register/context values
drm/nvc0-/gr: bump maximum gpc/tpc limits
drm/nvf0/gr: initial register/context setup
...
Not really "core" per-se. About to merge Ilia's work adding another
similar class for the VP2 xtensa engines, so, seems like a good time to
move all these to engine/.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Most graphics cards nowadays have a multiple of this limit as their vram,
so limiting GART doesn't seem to make much sense.
Signed-off-by: Maarten >Lnkhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Appears to fix the regression from "drm/nvc0/vm: handle bar tlb flushes
internally".
nvidia always seems to do this flush after writing values.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
