When multicast snooping is enabled, the Linux bridge resorts to flooding
unregistered multicast packets to all ports only in case it did not
detect a querier in the network.
The above condition is not reflected to underlying drivers, which is
especially problematic in IPv6 environments, as multicast snooping is
enabled by default and since neighbour solicitation packets might be
treated as unregistered multicast packets in case there is no
corresponding MDB entry.
Until the Linux bridge reflects its querier state to underlying drivers,
simply treat unregistered multicast packets as broadcast and allow them
to reach their destination.
Fixes: 9df552ef3e ("mlxsw: spectrum: Improve IPv6 unregistered multicast flooding")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current code uses global variables, adjusts them and passes pointer down
to devlink. With every other mlxsw_core instance, the previously passed
pointer values are rewritten. Fix this by de-globalize the variables and
also memcpy size_params during devlink resource registration.
Also, introduce a convenient size_param_init helper.
Fixes: ef3116e540 ("mlxsw: spectrum: Register KVD resources with devlink")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IP_TTL, IP_ECN and IP_DSCP are using the same offset within the
scratchpad as L4 ports. Fix this by shifting all up.
Fixes: 5f57e09091 ("mlxsw: acl: Add ip ttl acl element")
Fixes: i80d0fe4710c ("mlxsw: acl: Add ip tos acl element")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun says:
====================
net/smc: fixes 2018-02-28
here are 3 smc bug fixes for the net-tree. Karsten's first patch is
the reworked version of last week's
"[PATCH net-next 2/5] net/smc: fix structure size"
patch, now solved without using __packed, and now targetted for net
instead of net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The CONFIRM LINK reply message must contain the link_id sent
by the server. And set the link_id explicitly when
initializing the link.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sizeof(struct smc_cdc_msg) evaluates to 48 bytes instead of the
required 44 bytes. We need to use the constant value of
SMC_WR_TX_SIZE to set and check the control message length.
Signed-off-by: Karsten Graul <kgraul@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We try to disable NAPI to prevent a single XDP TX queue being used by
multiple cpus. But we don't check if device is up (NAPI is enabled),
this could result stall because of infinite wait in
napi_disable(). Fixing this by checking device state through
netif_running() before.
Fixes: 4941d472bf ("virtio-net: do not reset during XDP set")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The link to the pdf containing the algorithm description is now a
dead link; it seems http://www.ifp.illinois.edu/~srikant/ has been
moved to https://sites.google.com/a/illinois.edu/srikant/ and none of
the original papers can be found there...
I have replaced it with the only working copy I was able to find.
n.b. there is also a copy available at:
http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.296.6350&rep=rep1&type=pdf
However, this seems to only be a *cached* version, so I am unsure
exactly how reliable that link can be expected to remain over time
and have decided against using that one.
Signed-off-by: Joey Pabalinas <joeypabalinas@gmail.com>
1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
When the connection is reset, there is no point in
keeping the packets on the write queue until the connection
is closed.
RFC 793 (page 70) and RFC 793-bis (page 64) both suggest
purging the write queue upon RST:
https://tools.ietf.org/html/draft-ietf-tcpm-rfc793bis-07
Moreover, this is essential for a correct MSG_ZEROCOPY
implementation, because userspace cannot call close(fd)
before receiving zerocopy signals even when the connection
is reset.
Fixes: f214f915e7 ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng says:
====================
tcp: revert a F-RTO extension due to broken middle-boxes
This patch series reverts a (non-standard) TCP F-RTO extension that aimed
to detect more spurious timeouts. Unfortunately it could result in poor
performance due to broken middle-boxes that modify TCP packets. E.g.
https://www.spinics.net/lists/netdev/msg484154.html
We believe the best and simplest solution is to just revert the change.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 89fe18e44f.
While the patch could detect more spurious timeouts, it could cause
poor TCP performance on broken middle-boxes that modifies TCP packets
(e.g. receive window, SACK options). Since the performance gain is
much smaller compared to the potential loss. The best solution is
to fully revert the change.
Fixes: 89fe18e44f ("tcp: extend F-RTO to catch more spurious timeouts")
Reported-by: Teodor Milkov <tm@del.bg>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit cc663f4d4c. While fixing
some broken middle-boxes that modifies receive window fields, it does not
address middle-boxes that strip off SACK options. The best solution is
to fully revert this patch and the root F-RTO enhancement.
Fixes: cc663f4d4c ("tcp: restrict F-RTO to work-around broken middle-boxes")
Reported-by: Teodor Milkov <tm@del.bg>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann says:
====================
s390/qeth: fixes 2018-02-27
please apply some more qeth patches for -net and stable.
One patch fixes a performance bug in the TSO path. Then there's several
more fixes for IP management on L3 devices - including a revert, so that
the subsequent fix cleanly applies to earlier kernels.
The final patch takes care of a race in the control IO code that causes
qeth to miss the cmd response, and subsequently trigger device recovery.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If multiple IPA commands are build & sent out concurrently,
fill_ipacmd_header() may assign a seqno value to a command that's
different from what send_control_data() later assigns to this command's
reply.
This is due to other commands passing through send_control_data(),
and incrementing card->seqno.ipa along the way.
So one IPA command has no reply that's waiting for its seqno, while some
other IPA command has multiple reply objects waiting for it.
Only one of those waiting replies wins, and the other(s) times out and
triggers a recovery via send_ipa_cmd().
Fix this by making sure that the same seqno value is assigned to
a command and its reply object.
Do so immediately before submitting the command & while holding the
irq_pending "lock", to produce nicely ascending seqnos.
As a side effect, *all* IPA commands now use a reply object that's
waiting for its actual seqno. Previously, early IPA commands that were
submitted while the card was still DOWN used the "catch-all" IDX seqno.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current code ("qeth_l3_ip_from_hash()") matches a queried address object
against objects in the IP table by IP address, Mask/Prefix Length and
MAC address ("qeth_l3_ipaddrs_is_equal()"). But what callers actually
require is either
a) "is this IP address registered" (ie. match by IP address only),
before adding a new address.
b) or "is this address object registered" (ie. match all relevant
attributes), before deleting an address.
Right now
1. the ADD path is too strict in its lookup, and eg. doesn't detect
conflicts between an existing NORMAL address and a new VIPA address
(because the NORMAL address will have mask != 0, while VIPA has
a mask == 0),
2. the DELETE path is not strict enough, and eg. allows del_rxip() to
delete a VIPA address as long as the IP address matches.
Fix all this by adding helpers (_addr_match_ip() and _addr_match_all())
that do the appropriate checking.
Note that the ADD path for NORMAL addresses is special, as qeth keeps
track of how many times such an address is in use (and there is no
immediate way of returning errors to the caller). So when a requested
NORMAL address _fully_ matches an existing one, it's not considered a
conflict and we merely increment the refcount.
Fixes: 5f78e29cee ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit cb816192d9.
The issue this attempted to fix never actually occurs.
l3_add_rxip() checks (via l3_ip_from_hash()) if the requested address
was previously added to the card. If so, it returns -EEXIST and doesn't
call l3_add_ip().
As a result, the "address exists" path in l3_add_ip() is never taken
for rxip addresses, and this patch had no effect.
Fixes: cb816192d9 ("s390/qeth: fix using of ref counter for rxip addresses")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Registering an IPv4 address with the HW takes quite a while, so we
temporarily drop the ip_htable lock. Any concurrent add/remove of the
same IP adjusts the IP's use count, and (on remove) is then blocked by
addr->in_progress.
After the register call has completed, we check the use count for
concurrently attempted add/remove calls - and possibly straight-away
deregister the IP again. This happens via l3_delete_ip(), which
1) looks up the queried IP in the htable (getting a reference to the
*same* queried object),
2) deregisters the IP from the HW, and
3) frees the IP object.
The caller in l3_add_ip() then does a second free on the same object.
For this case, skip all the extra checks and lookups in l3_delete_ip()
and just deregister & free the IP object ourselves.
Fixes: 5f78e29cee ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the HW is not reachable, then none of the IPs in qeth's internal
table has been registered with the HW yet. So when deleting such an IP,
there's no need to stage it for deregistration - just drop it from
the table.
This fixes the "add-delete-add" scenario on an offline card, where the
the second "add" merely increments the IP's use count. But as the IP is
still set to DISP_ADDR_DELETE from the previous "delete" step,
l3_recover_ip() won't register it with the HW when the card goes online.
Fixes: 5f78e29cee ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_get_elements_for_range() doesn't know how to handle a 0-length
range (ie. start == end), and returns 1 when it should return 0.
Such ranges occur on TSO skbs, where the L2/L3/L4 headers (and thus all
of the skb's linear data) are skipped when mapping the skb into regular
buffer elements.
This overestimation may cause several performance-related issues:
1. sub-optimal IO buffer selection, where the next buffer gets selected
even though the skb would actually still fit into the current buffer.
2. forced linearization, if the element count for a non-linear skb
exceeds QETH_MAX_BUFFER_ELEMENTS.
Rather than modifying qeth_get_elements_for_range() and adding overhead
to every caller, fix up those callers that are in risk of passing a
0-length range.
Fixes: 2863c61334 ("qeth: refactor calculation of SBALE count")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't include in the Rx bytecount of the packet sent up the stack:
the FCB (frame control block), and the padding bytes inserted by
the controller into the frame payload, nor the FCS. All these are
being pulled out of the skb by gfar_process_frame().
This issue is old, likely from the driver's beginnings, however
it was amplified by recent:
commit d903ec7711 ("gianfar: simplify FCS handling and fix memory leak")
which basically added the FCS to the Rx bytecount, and so brought
this to my attention.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Cinterion PL8 is an LTE modem with 2 possible WWAN interfaces.
The modem is controlled via AT commands through the exposed TTYs.
AT^SWWAN write command can be used to activate or deactivate a WWAN
connection for a PDP context defined with AT+CGDCONT. UE supports
two WWAN adapter. Both WWAN adapters can be activated a the same time
Signed-off-by: Bassem Boubaker <bassem.boubaker@actia.fr>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tls ulp overrides sk->prot with a new tls specific proto structs.
The tls specific structs were previously based on the ipv4 specific
tcp_prot sturct.
As a result, attaching the tls ulp to an ipv6 tcp socket replaced
some ipv6 callback with the ipv4 equivalents.
This patch adds ipv6 tls proto structs and uses them when
attached to ipv6 sockets.
Fixes: 3c4d755915 ('tls: kernel TLS support')
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have uninlined the sh_eth_{read|write}() functions introduced in the
commit 4a55530f38 ("net: sh_eth: modify the definitions of register").
Now remove *inline* from sh_eth_tsu_{read|write}() as well and move
these functions from the header to the driver itself. This saves 684
more bytes of object code (ARM gcc 4.8.5)...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
net: fix IFLA_MTU ignored on NEWLINK for some ip and ipv6 tunnels
The fix for ip_gre follows the way other ip tunnels do: not to
set mtu in ndo_init, as ip_tunnel_newlink will take care of it
properly.
The fix for ip6_tunnel and sit follows the way ipv6 tunenls do:
to set mtu again according to IFLA_MTU after, as all bind_dev
are called in ndo_init where it can't get the tb[IFLA_MTU].
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 128bb975dc ("ip6_gre: init dev->mtu and dev->hard_header_len
correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same
mtu fix is also needed for sit.
Note that dev->hard_header_len setting for sit works fine, no need to
fix it. sit is actually ipv4 tunnel, it can't call ip6_tnl_change_mtu
to set mtu.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 128bb975dc ("ip6_gre: init dev->mtu and dev->hard_header_len
correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same
mtu fix is also needed for ip6_tunnel.
Note that dev->hard_header_len setting for ip6_tunnel works fine,
no need to fix it.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's safe to remove the setting of dev's needed_headroom and mtu in
__gre_tunnel_init, as discussed in [1], ip_tunnel_newlink can do it
properly.
Now Eric noticed that it could cover the mtu value set in do_setlink
when creating a ip_gre dev. It makes IFLA_MTU param not take effect.
So this patch is to remove them to make IFLA_MTU work, as in other
ipv4 tunnels.
[1]: https://patchwork.ozlabs.org/patch/823504/
Fixes: c544193214 ("GRE: Refactor GRE tunneling code.")
Reported-by: Eric Garver <e@erig.me>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit f5e64032a7 ("net: phy: fix resume handling") changes the
locking semantics for phy_resume() such that the caller now needs to
hold the phy mutex. Not all call sites were adopted to this new
semantic, resulting in warnings from the added
WARN_ON(!mutex_is_locked(&phydev->lock)). Rather than change the
semantics, add a __phy_resume() and restore the old behavior of
phy_resume().
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: f5e64032a7 ("net: phy: fix resume handling")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 60c2530696 ("tipc: fix race between poll() and
setsockopt()") we introduced a pointer from struct tipc_group to the
'group_is_connected' flag in struct tipc_sock, so that this field can
be checked without dereferencing the group pointer of the latter struct.
The initial value for this flag is correctly set to 'false' when a
group is created, but we miss the case when no group is created at
all, in which case the initial value should be 'true'. This has the
effect that SOCK_RDM/DGRAM sockets sending datagrams never receive
POLLOUT if they request so.
This commit corrects this bug.
Fixes: 60c2530696 ("tipc: fix race between poll() and setsockopt()")
Reported-by: Hoang Le <hoang.h.le@dektek.com.au>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix resource coverity errors.
Fixes: d9f9b9a4d0 ("devlink: Add support for resource abstraction")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to RFC 1191 sections 3 and 4, ICMP frag-needed messages
indicating an MTU below 68 should be rejected:
A host MUST never reduce its estimate of the Path MTU below 68
octets.
and (talking about ICMP frag-needed's Next-Hop MTU field):
This field will never contain a value less than 68, since every
router "must be able to forward a datagram of 68 octets without
fragmentation".
Furthermore, by letting net.ipv4.route.min_pmtu be set to negative
values, we can end up with a very large PMTU when (-1) is cast into u32.
Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to
unsigned ints.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth 2018-02-26
Here are a two Bluetooth driver fixes for the 4.16 kernel.
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The current implementation checks the combined size of the children with
the 'size' of the parent. The correct behavior is to check the combined
size vs the pending change and to compare vs the 'size_new'.
Fixes: d9f9b9a4d0 ("devlink: Add support for resource abstraction")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Tested-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
r8152 driver handles TSO packets (limited to ~16KB) quite well,
but pretends each TSO logical packet is a single packet on the wire.
There is also some error since headers are accounted once, but
error rate is small enough that we do not care.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 5c38bd1b82.
skb->mark contains the mark the encapsulated traffic which
can result in incorrect routing decisions being made such
as routing loops if the route chosen is via tunnel itself.
The correct method should be to use tunnel->fwmark.
Signed-off-by: Thomas Winter <thomas.winter@alliedtelesis.co.nz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a VLAN is added on a port, a reference is taken on the
corresponding master VLAN entry. If it does not already exist, then it
is created and a reference taken.
However, in the second case a reference is not really taken when
CONFIG_REFCOUNT_FULL is enabled as refcount_inc() is replaced by
refcount_inc_not_zero().
Fix this by using refcount_set() on a newly created master VLAN entry.
Fixes: 2512775985 ("net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Renesas R-Car V3H (R8A77980) SoC has the R-Car gen3 compatible EtherAVB
device, so document the SoC specific bindings.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added MODULE_ALIAS("rpmsg:IPCRTR") to ensure qrtr-smd and qrtr will load
when IPCRTR channel is detected.
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sometimes when physical lines have a just good noise to make the protocol
handshaking fail, but the carrier detect still good. Then after remove of
the noise, nobody will trigger this protocol to be start again to cause
the link to never come back. The fix is when the carrier is still on, not
terminate the protocol handshaking.
Signed-off-by: Denis Du <dudenis2000@yahoo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't flush batched XDP packets through xdp_do_flush_map(), this
will cause packets stall at TX queue. Consider we don't do XDP on NAPI
poll(), the only possible fix is to call xdp_do_flush_map()
immediately after xdp_do_redirect().
Note, this in fact won't try to batch packets through devmap, we could
address in the future.
Reported-by: Christoffer Dall <christoffer.dall@linaro.org>
Fixes: 761876c857 ("tap: XDP support")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Except for tuntap, all other drivers' XDP was implemented at NAPI
poll() routine in a bh. This guarantees all XDP operation were done at
the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But
for tuntap, we do it in process context and we try to protect XDP
processing by RCU reader lock. This is insufficient since
CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which
breaks the assumption that all XDP were processed in the same CPU.
Fixing this by simply disabling preemption during XDP processing.
Fixes: 761876c857 ("tap: XDP support")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 762c330d67. The
reason is we try to batch packets for devmap which causes calling
xdp_do_flush() in the process context. Simply disabling preemption
may not work since process may move among processors which lead
xdp_do_flush() to miss some flushes on some processors.
So simply revert the patch, a follow-up patch will add the xdp flush
correctly.
Reported-by: Christoffer Dall <christoffer.dall@linaro.org>
Fixes: 762c330d67 ("tuntap: add missing xdp flush")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add check for build_skb enabled ring in ixgbe_dma_sync_frag().
In that case &skb_shinfo(skb)->frags[0] may not always be set which
can lead to a crash. Instead we derive the page offset from skb->data.
Fixes: 42073d91a2
("ixgbe: Have the CPU take ownership of the buffers sooner")
CC: stable <stable@vger.kernel.org>
Reported-by: Ambarish Soman <asoman@redhat.com>
Suggested-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is not valid for orion5x to use mac_pton().
First of all, the orion5x buffer is not NULL terminated. mac_pton()
has no business operating on non-NULL terminated buffers because
only the caller can know that this is valid and in what manner it
is ok to parse this NULL'less buffer.
Second of all, orion5x operates on an __iomem pointer, which cannot
be dereferenced using normal C pointer operations. Accesses to
such areas much be performed with the proper iomem accessors.
Fixes: 4904dbda41 ("ARM: orion5x: use mac_pton() helper")
Signed-off-by: David S. Miller <davem@davemloft.net>
James Chapman says:
====================
l2tp: fix API races discovered by syzbot
This patch series addresses several races with L2TP APIs discovered by
syzbot. There are no functional changes.
The set of patches 1-5 in combination fix the following syzbot reports.
19c09769f WARNING in debug_print_object
347bd5acd KASAN: use-after-free Read in inet_shutdown
6e6a5ec8d general protection fault in pppol2tp_connect
9df43faf0 KASAN: use-after-free Read in pppol2tp_connect
My first attempts to fix these issues were as net-next patches but
the series included other refactoring and cleanup work. I was asked to
separate out the bugfixes and redo for the net tree, which is what
these patches are.
The changes are:
1. Fix inet_shutdown races when L2TP tunnels and sessions close. (patches 1-2)
2. Fix races with tunnel and its socket. (patch 3)
3. Fix race in pppol2tp_release with session and its socket. (patch 4)
4. Fix tunnel lookup use-after-free. (patch 5)
All of the syzbot reproducers hit races in the tunnel and pppol2tp
session create and destroy paths. These tests create and destroy
pppol2tp tunnels and sessions rapidly using multiple threads,
provoking races in several tunnel/session create/destroy paths. The
key problem was that each tunnel/session socket could be destroyed
while its associated tunnel/session object still existed (patches 3,
4). Patch 5 addresses a problem with the way tunnels are removed from
the tunnel list. Patch 5 is tagged that it addresses all four syzbot
issues, though all 5 patches are needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
pppol2tp_release uses call_rcu to put the final ref on its socket. But
the session object doesn't hold a ref on the session socket so may be
freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by
having the session hold a ref on its socket until the session is
destroyed. It is this ref that is dropped via call_rcu.
Sessions are also deleted via l2tp_tunnel_closeall. This must now also put
the final ref via call_rcu. So move the call_rcu call site into
pppol2tp_session_close so that this happens in both destroy paths. A
common destroy path should really be implemented, perhaps with
l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release
does, but this will be looked at later.
ODEBUG: activate active (active state 1) object type: rcu_head hint: (null)
WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220
Modules linked in:
CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:debug_print_object+0x166/0x220
RSP: 0018:ffff880013647a00 EFLAGS: 00010082
RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0
RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001
R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001
R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0
Call Trace:
debug_object_activate+0x38b/0x530
? debug_object_assert_init+0x3b0/0x3b0
? __mutex_unlock_slowpath+0x85/0x8b0
? pppol2tp_session_destruct+0x110/0x110
__call_rcu.constprop.66+0x39/0x890
? __call_rcu.constprop.66+0x39/0x890
call_rcu_sched+0x17/0x20
pppol2tp_release+0x2c7/0x440
? fcntl_setlk+0xca0/0xca0
? sock_alloc_file+0x340/0x340
sock_release+0x92/0x1e0
sock_close+0x1b/0x20
__fput+0x296/0x6e0
____fput+0x1a/0x20
task_work_run+0x127/0x1a0
do_exit+0x7f9/0x2ce0
? SYSC_connect+0x212/0x310
? mm_update_next_owner+0x690/0x690
? up_read+0x1f/0x40
? __do_page_fault+0x3c8/0xca0
do_group_exit+0x10d/0x330
? do_group_exit+0x330/0x330
SyS_exit_group+0x22/0x30
do_syscall_64+0x1e0/0x730
? trace_hardirqs_off_thunk+0x1a/0x1c
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f362e471259
RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259
RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000
RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60
R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000
Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e
8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41
Fixes: ee40fb2e1e ("l2tp: protect sock pointer of struct pppol2tp_session with RCU")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tunnel socket tunnel->sock (struct sock) is accessed when
preparing a new ppp session on a tunnel at pppol2tp_session_init. If
the socket is closed by a thread while another is creating a new
session, the threads race. In pppol2tp_connect, the tunnel object may
be created if the pppol2tp socket is associated with the special
session_id 0 and the tunnel socket is looked up using the provided
fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel
socket to prevent it being destroyed during pppol2tp_connect since
this may itself may race with the socket being destroyed. Doing
sockfd_lookup in pppol2tp_connect isn't sufficient to prevent
tunnel->sock going away either because a given tunnel socket fd may be
reused between calls to pppol2tp_connect. Instead, have
l2tp_tunnel_create sock_hold the tunnel socket before it does
sockfd_put. This ensures that the tunnel's socket is always extant
while the tunnel object exists. Hold a ref on the socket until the
tunnel is destroyed and ensure that all tunnel destroy paths go
through a common function (l2tp_tunnel_delete) since this will do the
final sock_put to release the tunnel socket.
Since the tunnel's socket is now guaranteed to exist if the tunnel
exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel
to derive the tunnel from the socket since this is always
sk_user_data.
Also, sessions no longer sock_hold the tunnel socket since sessions
already hold a tunnel ref and the tunnel sock will not be freed until
the tunnel is freed. Removing these sock_holds in
l2tp_session_register avoids a possible sock leak in the
pppol2tp_connect error path if l2tp_session_register succeeds but
attaching a ppp channel fails. The pppol2tp_connect error path could
have been fixed instead and have the sock ref dropped when the session
is freed, but doing a sock_put of the tunnel socket when the session
is freed would require a new session_free callback. It is simpler to
just remove the sock_hold of the tunnel socket in
l2tp_session_register, now that the tunnel socket lifetime is
guaranteed.
Finally, some init code in l2tp_tunnel_create is reordered to ensure
that the new tunnel object's refcount is set and the tunnel socket ref
is taken before the tunnel socket destructor callbacks are set.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
RIP: 0010:pppol2tp_session_init+0x1d6/0x500
RSP: 0018:ffff88001377fb40 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d
RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228
RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002
R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000
R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76
FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0
Call Trace:
pppol2tp_connect+0xd18/0x13c0
? pppol2tp_session_create+0x170/0x170
? __might_fault+0x115/0x1d0
? lock_downgrade+0x860/0x860
? __might_fault+0xe5/0x1d0
? security_socket_connect+0x8e/0xc0
SYSC_connect+0x1b6/0x310
? SYSC_bind+0x280/0x280
? __do_page_fault+0x5d1/0xca0
? up_read+0x1f/0x40
? __do_page_fault+0x3c8/0xca0
SyS_connect+0x29/0x30
? SyS_accept+0x40/0x40
do_syscall_64+0x1e0/0x730
? trace_hardirqs_off_thunk+0x1a/0x1c
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7ffb3e376259
RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259
RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004
RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60
R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000
Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f
a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16
Fixes: 80d84ef3ff ("l2tp: prevent l2tp_tunnel_delete racing with userspace close")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, if a ppp session was closed, we called inet_shutdown to mark
the socket as unconnected such that userspace would get errors and
then close the socket. This could race with userspace closing the
socket. Instead, leave userspace to close the socket in its own time
(our session will be detached anyway).
BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0
Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296
CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91
Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Call Trace:
dump_stack+0x101/0x157
? inet_shutdown+0x5d/0x1c0
print_address_description+0x78/0x260
? inet_shutdown+0x5d/0x1c0
kasan_report+0x240/0x360
__asan_load4+0x78/0x80
inet_shutdown+0x5d/0x1c0
? pppol2tp_show+0x80/0x80
pppol2tp_session_close+0x68/0xb0
l2tp_tunnel_closeall+0x199/0x210
? udp_v6_flush_pending_frames+0x90/0x90
l2tp_udp_encap_destroy+0x6b/0xc0
? l2tp_tunnel_del_work+0x2e0/0x2e0
udpv6_destroy_sock+0x8c/0x90
sk_common_release+0x47/0x190
udp_lib_close+0x15/0x20
inet_release+0x85/0xd0
inet6_release+0x43/0x60
sock_release+0x53/0x100
? sock_alloc_file+0x260/0x260
sock_close+0x1b/0x20
__fput+0x19f/0x380
____fput+0x1a/0x20
task_work_run+0xd2/0x110
exit_to_usermode_loop+0x18d/0x190
do_syscall_64+0x389/0x3b0
entry_SYSCALL_64_after_hwframe+0x26/0x9b
RIP: 0033:0x7fe240a45259
RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259
RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5
RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000
R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000
R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040
Allocated by task 8331:
save_stack+0x43/0xd0
kasan_kmalloc+0xad/0xe0
kasan_slab_alloc+0x12/0x20
kmem_cache_alloc+0x144/0x3e0
sock_alloc_inode+0x22/0x130
alloc_inode+0x3d/0xf0
new_inode_pseudo+0x1c/0x90
sock_alloc+0x30/0x110
__sock_create+0xaa/0x4c0
SyS_socket+0xbe/0x130
do_syscall_64+0x128/0x3b0
entry_SYSCALL_64_after_hwframe+0x26/0x9b
Freed by task 8314:
save_stack+0x43/0xd0
__kasan_slab_free+0x11a/0x170
kasan_slab_free+0xe/0x10
kmem_cache_free+0x88/0x2b0
sock_destroy_inode+0x49/0x50
destroy_inode+0x77/0xb0
evict+0x285/0x340
iput+0x429/0x530
dentry_unlink_inode+0x28c/0x2c0
__dentry_kill+0x1e3/0x2f0
dput.part.21+0x500/0x560
dput+0x24/0x30
__fput+0x2aa/0x380
____fput+0x1a/0x20
task_work_run+0xd2/0x110
exit_to_usermode_loop+0x18d/0x190
do_syscall_64+0x389/0x3b0
entry_SYSCALL_64_after_hwframe+0x26/0x9b
Fixes: fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
