Avoid need to manually handle of_node_put() by using
for_each_available_child_of_node_scoped(), which can simplfy code.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Avoid need to manually handle of_node_put() by using
for_each_child_of_node_scoped(), which can simplfy code.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Avoid need to manually handle of_node_put() by using
for_each_child_of_node_scoped(), which can simplfy code.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a channel ctx is assigned to a link, we set the
LINK_CONTEXT_MODIFY_RATES_INFO to indicate that the rate fields are now
valid. But then we always take the rates of 2.4 GHz regardless of actual
used band.
This is because we are getting the band from bss_conf->chanctx_conf, but
this is assigned only after drv_assign_vif_chanctx returns, so we take
the bands of 2.4 GHz.
Fix it by taking the band from the iwl_mvm_link_info::phy_ctxt instead,
as this has already assigned in this point.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240901071542.11c2d3609609.I8fa59e29b6bb38e5d06f3536d54dfb2c5d5bab11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we de-activate a link because it started a CSA with mode=1, we want
to tell the firmware it can no longer transmit any frame for that link.
The firmware will do that on its own if the CSA indication (beacon /
action frame) was received on that same link, but with MLO, things got
more complex and the firmware can't track cross link CSA.
Tell the firmware if we de-activate a link because of CSA with mode=1 to
prevent it from transmitting, even if it is only an NDP PM=1 frame that
is part of the de-activation flow.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.4bef89d438d4.If7147a7a84054e67c05414c753d73f4e2e0e6e37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The channel number is at the same position across all versions
of the channel description struct, so move it out of the union
that versions it. Also add __packed annotations to all of the
sub-structs and the union so it's packed correctly, and fully
document the structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.e31623ae4201.I1ea69a8ec3d39492f39d84e31fb105b159359c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Correct spelling in iw_handler.h.
As reported by codespell.
Also, while the "few shortcomings" line is being updated,
correct its grammar.
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240903-wifi-spell-v2-1-bfcf7062face@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Alexander Lobakin says:
====================
netdev_features: start cleaning netdev_features_t up
NETDEV_FEATURE_COUNT is currently 64, which means we can't add any new
features as netdev_features_t is u64.
As per several discussions, instead of converting netdev_features_t to
a bitmap, which would mean A LOT of changes, we can try cleaning up
netdev feature bits.
There's a bunch of bits which don't really mean features, rather device
attributes/properties that can't be changed via Ethtool in any of the
drivers. Such attributes can be moved to netdev private flags without
losing any functionality.
Start converting some read-only netdev features to private flags from
the ones that are most obvious, like lockless Tx, inability to change
network namespace etc. I was able to reduce NETDEV_FEATURE_COUNT from
64 to 60, which mean 4 free slots for new features. There are obviously
more read-only features to convert, such as highDMA, "challenged VLAN",
HSR (4 bits) - this will be done in subsequent series.
Please note that currently netdev features are not uAPI/ABI by any means.
Ethtool passes their names and bits to the userspace separately and there
are no hardcoded names/bits in the userspace, so that new Ethtool could
work on older kernels and vice versa.
This, however, isn't true for Ethtools < 3.4. I haven't changed the bit
positions of the already existing features and instead replaced the freed
bits with stubs. But it's anyway theoretically possible that Ethtools
older than 2011 will break. I hope no currently supported distros supply
such an ancient version.
Shell scripts also most likely won't break since the removed bits were
always read-only, meaning nobody would try touching them from a script.
====================
Link: https://patch.msgid.link/20240829123340.789395-1-aleksander.lobakin@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NETIF_F_ALL_FCOE is used only in vlan_dev.c, 2 times. Now that it's only
2 bits, open-code it and remove the definition from netdev_features.h.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ability to handle maximum FCoE frames of 2158 bytes can never be changed
and thus more of an attribute, not a toggleable feature.
Move it from netdev_features_t to "cold" priv flags (bitfield bool) and
free yet another feature bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NETIF_F_LLTX can't be changed via Ethtool and is not a feature,
rather an attribute, very similar to IFF_NO_QUEUE (and hot).
Free one netdev_features_t bit and make it a "hot" private flag.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make dev->priv_flags `u32` back and define bits higher than 31 as
bitfield booleans as per Jakub's suggestion. This simplifies code
which accesses these bits with no optimization loss (testb both
before/after), allows to not extend &netdev_priv_flags each time,
but also scales better as bits > 63 in the future would only add
a new u64 to the structure with no complications, comparing to
that extending ::priv_flags would require converting it to a bitmap.
Note that I picked `unsigned long :1` to not lose any potential
optimizations comparing to `bool :1` etc.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This commit introduces implementations of three functions:
.port_fdb_dump
.port_fdb_add
.port_fdb_del
The FDB database organization is the same as in other old Vitesse chips:
It has 2048 rows and 4 columns (buckets). The row index is calculated by
the hash function 'vsc73xx_calc_hash' and the FDB entry must be placed
exactly into row[hash]. The chip selects the bucket number by itself.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://patch.msgid.link/20240827123938.582789-1-paweldembicki@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmbSOo4THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b3Q7CACNWVZ79TdlnhayDyXaJ9E1j/jDjUdY
oUpce0n8zCceowkrwsa/XqCltmJ9wi/3FaAl4/kAjGu2GoqPReD+P0UkUAxf0pCX
5JllkFJP5JTZyU81N3ykfKWcZJ03KMuSxc2fQpW36auPuy9LlxeNE1sxGvWYcjex
IQvzbmszjwWLvDQ2meszb0MGwW2jD1m+iX2LfqzpBZQx5TFQHA91B4IWPI/VxmJE
78aAB89TYCjE/2FodFH8znKCGcjH61QvmNIkQ530Qca4qeIMBwcFF5YatR77SjaZ
QPYsm+n5VxolJMv1/PD10t1kglqJ9lFIfCa72U1tCIIANugaxqddpMHB
=Uhyk
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.12-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-08-30
The first patch is by Duy Nguyen and document the R-Car V4M support in
the rcar-canfd DT bindings.
Frank Li's patch converts the microchip,mcp251x.txt DT bindings
documentation to yaml.
A patch by Zhang Changzhong update a comment in the j1939 CAN
networking stack.
Stefan Mätje's patch updates the CAN configuration netlink code, so
that the bit timing calculation doesn't work on stale
can_priv::ctrlmode data.
Martin Jocic contributes a patch for the kvaser_pciefd driver to
convert some ifdefs into if (IS_ENABLED()).
The last patch is by Yan Zhen and simplifies the probe() function of
the kvaser USB driver by using dev_err_probe().
* tag 'linux-can-next-for-6.12-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: kvaser_usb: Simplify with dev_err_probe()
can: kvaser_pciefd: Use IS_ENABLED() instead of #ifdef
can: netlink: avoid call to do_set_data_bittiming callback with stale can_priv::ctrlmode
can: j1939: use correct function name in comment
dt-bindings: can: convert microchip,mcp251x.txt to yaml
dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support
====================
Link: https://patch.msgid.link/20240830214406.1605786-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for RTL8126A rev.b. Its XID is 0x64a. It is basically
based on the one with XID 0x649, but with different firmware file.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20240830021810.11993-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 27f91aaf49 ("netdev-genl: Add netlink framework functions
for napi"), when an invalid NAPI ID is specified the return value
-EINVAL is used and no extack is set.
Change the return value to -ENOENT and set the extack.
Before this commit:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--do napi-get --json='{"id": 451}'
Netlink error: Invalid argument
nl_len = 36 (20) nl_flags = 0x100 nl_type = 2
error: -22
After this commit:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--do napi-get --json='{"id": 451}'
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2
extack: {'bad-attr': '.id'}
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240831121707.17562-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This callback doesn't seem to serve much purpose, and prevents things
like:
- systemd.link files from disabling autonegotiation
- carrier detection in NetworkManager
- any ethtool setting
prior to userspace bringing the link up.
The only fear I can think of is accessing unclocked resources due to
pm_runtime, but ethtool ioctls handle that as of commit
f32a213765 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops")
Reviewed-by: Dmitry Dolenko <d.dolenko@metrotek.ru>
Tested-by: Dmitry Dolenko <d.dolenko@metrotek.ru>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Srujana Challa says:
====================
octeontx2-af: update CPT block for CN10KB and CN10KA B0
This commit addresses two key updates for the CN10KB and CN10KA B0:
1. The number of FLT interrupt vectors has been reduced to 2 on CN10KB.
The code is updated to reflect this change across the CN10K series.
2. The maximum CPT credits that RX can use are now configurable through
a hardware CSR on CN10KA B0. This patch sets the default value to optimize
peak performance, aligning it with other chip versions.
v2:
- Addressed the review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The maximum CPT credits that RXC can use are now configurable on CN10KA B0
through a hardware CSR. This patch sets the default value to optimize peak
performance, aligning it with other chip versions.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch modifies the driver to prevent access to RXC hardware
registers on the CN10KB, as RXC is not available on this chip.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates the driver to use a dynamic number of vectors instead
of a hard-coded value. This change accommodates the CN10KB, which has 2
vectors, unlike the previously supported chips that have 3 vectors.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
Unmask upper DSCP bits - part 2
tl;dr - This patchset continues to unmask the upper DSCP bits in the
IPv4 flow key in preparation for allowing IPv4 FIB rules to match on
DSCP. No functional changes are expected. Part 1 was merged in commit
("Merge branch 'unmask-upper-dscp-bits-part-1'").
The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB
lookup to match against the TOS selector in FIB rules and routes.
It is currently impossible for user space to configure FIB rules that
match on the DSCP value as the upper DSCP bits are either masked in the
various call sites that initialize the IPv4 flow key or along the path
to the FIB core.
In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we
need to make sure the entire DSCP value is present in the IPv4 flow key.
This patchset continues to unmask the upper DSCP bits, but this time in
the output route path.
Patches #1-#3 unmask the upper DSCP bits in the various places that
invoke the core output route lookup functions directly.
Patches #4-#6 do the same in three helpers that are widely used in the
output path to initialize the TOS field in the IPv4 flow key.
The rest of the patches continue to unmask these bits in call sites that
invoke the following wrappers around the core lookup functions:
Patch #7 - __ip_route_output_key()
Patches #8-#12 - ip_route_output_flow()
The next patchset will handle the callers of ip_route_output_ports() and
ip_route_output_key().
No functional changes are expected as commit 1fa3314c14 ("ipv4:
Centralize TOS matching") moved the masking of the upper DSCP bits to
the core where 'flowi4_tos' is matched against the TOS selector.
Changes since v1 [1]:
* Remove IPTOS_RT_MASK in patch #7 instead of in patch #6
[1] https://lore.kernel.org/netdev/20240827111813.2115285-1-idosch@nvidia.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when calling ip_route_output_flow() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when calling ip_route_output_flow() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when calling ip_route_output_flow() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function calls flowi4_init_output() to initialize an IPv4 flow key
with which it then performs a FIB lookup using ip_route_output_flow().
The 'tos' variable with which the TOS value in the IPv4 flow key
(flowi4_tos) is initialized contains the full DS field. Unmask the upper
DSCP bits so that in the future the FIB lookup could be performed
according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function calls flowi4_init_output() to initialize an IPv4 flow key
with which it then performs a FIB lookup using ip_route_output_flow().
'arg->tos' with which the TOS value in the IPv4 flow key (flowi4_tos) is
initialized contains the full DS field. Unmask the upper DSCP bits so
that in the future the FIB lookup could be performed according to the
full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function returns a value that is used to initialize 'flowi4_tos'
before being passed to the FIB lookup API in the following call chain:
xfrm_bundle_create()
tos = xfrm_get_tos(fl, family)
xfrm_dst_lookup(..., tos, ...)
__xfrm_dst_lookup(..., tos, ...)
xfrm4_dst_lookup(..., tos, ...)
__xfrm4_dst_lookup(..., tos, ...)
fl4->flowi4_tos = tos
__ip_route_output_key(net, fl4)
Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Remove IPTOS_RT_MASK since it is no longer used.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
build_sk_flow_key() and __build_flow_key() are used to build an IPv4
flow key before calling one of the FIB lookup APIs.
Unmask the upper DSCP bits so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is used by a few socket types to retrieve the TOS value
with which to perform the FIB lookup for packets sent through the socket
(flowi4_tos). If a DS field was passed using the IP_TOS control message,
then it is used. Otherwise the one specified via the IP_TOS socket
option.
Unmask the upper DSCP bits so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is used to read the DS field that was stored in IPv4
sockets via the IP_TOS socket option so that it could be used to
initialize the flowi4_tos field before resolving an output route.
Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is called to resolve a route for an ICMP message that is
sent in response to a situation. Based on the type of the generated ICMP
message, the function is either passed the DS field of the packet that
generated the ICMP message or a DS field that is derived from it.
Unmask the upper DSCP bits before resolving and output route via
ip_route_output_key_hash() so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits so that in the future output routes could be
looked up according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when looking up an output route via the
RTM_GETROUTE netlink message so that in the future the lookup could be
performed according to the full DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_err_probe() is used to log an error message during the probe process
of a device.
It can simplify the error path and unify a message template.
Using this helper is totally fine even if err is known to never
be -EPROBE_DEFER.
The benefit compared to a normal dev_err() is the standardized format
of the error code, it being emitted symbolically and the fact that
the error code is returned which allows more compact error paths.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Link: https://patch.msgid.link/20240830110651.519119-1-yanzhen@vivo.com
mkl: fix indention
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Use the IS_ENABLED() macro to check kernel config defines instead of
ifdef. Use upper_32_bits() to avoid warnings about "right shift count
>= width of type" on systems with CONFIG_ARCH_DMA_ADDR_T_64BIT not
set. In kvaser_pciefd_write_dma_map_altera() use lower_32_bits() for
symmetry.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://patch.msgid.link/20240830141038.1402217-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch moves the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_changelink in front of the evaluation of data[IFLA_CAN_BITTIMING].
This avoids a call to do_set_data_bittiming providing a stale
can_priv::ctrlmode with a CAN_CTRLMODE_FD flag not matching the
requested state when switching between a CAN Classic and CAN-FD bitrate.
In the same manner the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_validate is also moved in front of the evaluation of
data[IFLA_CAN_BITTIMING].
This is a preparation for patches where the nominal and data bittiming
may have interdependencies on the driver side depending on the
CAN_CTRLMODE_FD flag state.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20240808164224.213522-1-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The function j1939_cancel_all_active_sessions() was renamed to
j1939_cancel_active_session() but name in comment wasn't updated.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Link: https://patch.msgid.link/1724935703-44621-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Convert binding doc microchip,mcp251x.txt to yaml.
Additional change:
- add ref to spi-peripheral-props.yaml
Fix below warning:
arch/arm64/boot/dts/freescale/imx8dx-colibri-eval-v3.dtb: /bus@5a000000/spi@5a020000/can@0:
failed to match any schema with compatible: ['microchip,mcp2515']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240814164407.4022211-1-Frank.Li@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Document support for the CAN-FD Interface on the Renesas R-Car V4M
(R8A779H0) SoC, which supports up to four channels.
The CAN-FD module on R-Car V4M is very similar to the one on R-Car V4H,
but differs in some hardware parameters, as reflected by the Parameter
Status Information part of the Global IP Version Register. However,
none of this parameterization should have any impact on the driver, as
the driver does not access any register that is impacted by the
parameterization (except for the number of channels).
Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
[geert: Clarify R-Car V4M differences]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/68b5f910bef89508e3455c768844ebe859d6ff1d.1722520779.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Correct spelling in nl802154.h.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-ID: <20240829-wpan-spell-v1-2-799d840e02c4@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Correct spelling in mac802154.h.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-ID: <20240829-wpan-spell-v1-1-799d840e02c4@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Add "EEE: Enabled/Disabled" to dmesg for supported X710 Base-T/KR/KX
cards. According to the IEEE standard report the EEE ability and the
EEE Link Partner ability. Use the kernel's 'ethtool_keee' structure
and report EEE link modes.
Example:
dmesg | grep 'NIC Link is'
ethtool --show-eee <device>
Before:
NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None
Supported EEE link modes: Not reported
Advertised EEE link modes: Not reported
Link partner advertised EEE link modes: Not reported
After:
NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None, EEE: Enabled
Supported EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Link partner advertised EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Occasionally when the system goes into pm_suspend, the suspend might fail
due to a PHY access error on the network adapter. Previously, this would
have caused the whole system to fail to go to a low power state.
An example of this was reported in the following Bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=205015
[ 1663.694828] e1000e 0000:00:19.0 eth0: Failed to disable ULP
[ 1664.731040] asix 2-3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ 1665.093513] e1000e 0000:00:19.0 eth0: Hardware Error
[ 1665.596760] e1000e 0000:00:19.0: pci_pm_resume+0x0/0x80 returned 0 after 2975399 usecs
and then the system never recovers from it, and all the following suspend failed due to this
[22909.393854] PM: pci_pm_suspend(): e1000e_pm_suspend+0x0/0x760 [e1000e] returns -2
[22909.393858] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -2
[22909.393861] PM: Device 0000:00:1f.6 failed to suspend async: error -2
This can be avoided by changing the return values of __e1000_shutdown and
e1000e_pm_suspend functions so that they always return 0 (success). This
is consistent with what other drivers do.
If the e1000e driver encounters a hardware error during suspend, potential
side effects include slightly higher power draw or non-working wake on
LAN. This is preferred to a system-level suspend failure, and a warning
message is written to the system log, so that the user can be aware that
the LAN controller experienced a problem during suspend.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205015
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
