Report that none of the rcu read lock maps are held while in an RCU
extended quiescent state (the section between rcu_idle_enter()
and rcu_idle_exit()). This helps detect any use of rcu_dereference()
and friends from within the section in idle where RCU is not allowed.
This way we can guarantee an extended quiescent window where the CPU
can be put in dyntick idle mode or can simply aoid to be part of any
global grace period completion while in the idle loop.
Uses of RCU from such mode are totally ignored by RCU, hence the
importance of these checks.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Earlier versions of RCU used the scheduling-clock tick to detect idleness
by checking for the idle task, but handled idleness differently for
CONFIG_NO_HZ=y. But there are now a number of uses of RCU read-side
critical sections in the idle task, for example, for tracing. A more
fine-grained detection of idleness is therefore required.
This commit presses the old dyntick-idle code into full-time service,
so that rcu_idle_enter(), previously known as rcu_enter_nohz(), is
always invoked at the beginning of an idle loop iteration. Similarly,
rcu_idle_exit(), previously known as rcu_exit_nohz(), is always invoked
at the end of an idle-loop iteration. This allows the idle task to
use RCU everywhere except between consecutive rcu_idle_enter() and
rcu_idle_exit() calls, in turn allowing architecture maintainers to
specify exactly where in the idle loop that RCU may be used.
Because some of the userspace upcall uses can result in what looks
to RCU like half of an interrupt, it is not possible to expect that
the irq_enter() and irq_exit() hooks will give exact counts. This
patch therefore expands the ->dynticks_nesting counter to 64 bits
and uses two separate bitfields to count process/idle transitions
and interrupt entry/exit transitions. It is presumed that userspace
upcalls do not happen in the idle loop or from usermode execution
(though usermode might do a system call that results in an upcall).
The counter is hard-reset on each process/idle transition, which
avoids the interrupt entry/exit error from accumulating. Overflow
is avoided by the 64-bitness of the ->dyntick_nesting counter.
This commit also adds warnings if a non-idle task asks RCU to enter
idle state (and these checks will need some adjustment before applying
Frederic's OS-jitter patches (http://lkml.org/lkml/2011/10/7/246).
In addition, validation of ->dynticks and ->dynticks_nesting is added.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The file rcutiny.c does not need moduleparam.h header, as
there are no modparams in this file.
However rcutiny_plugin.h does define a module_init() and
a module_exit() and it uses the various MODULE_ macros, so
it really does need module.h included.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The changed files were only including linux/module.h for the
EXPORT_SYMBOL infrastructure, and nothing else. Revector them
onto the isolated export header for faster compile times.
Nothing to see here but a whole lot of instances of:
-#include <linux/module.h>
+#include <linux/export.h>
This commit is only changing the kernel dir; next targets
will probably be mm, fs, the arch dirs, etc.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Add trace events to record grace-period start and end, quiescent states,
CPUs noticing grace-period start and end, grace-period initialization,
call_rcu() invocation, tasks blocking in RCU read-side critical sections,
tasks exiting those same critical sections, force_quiescent_state()
detection of dyntick-idle and offline CPUs, CPUs entering and leaving
dyntick-idle mode (except from NMIs), CPUs coming online and going
offline, and CPUs being kicked for staying in dyntick-idle mode for too
long (as in many weeks, even on 32-bit systems).
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu: Add the rcu flavor to callback trace events
The earlier trace events for registering RCU callbacks and for invoking
them did not include the RCU flavor (rcu_bh, rcu_preempt, or rcu_sched).
This commit adds the RCU flavor to those trace events.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This patch #ifdefs TINY_RCU kthreads out of the kernel unless RCU_BOOST=y,
thus eliminating context-switch overhead if RCU priority boosting has
not been configured.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Add a string to the rcu_batch_start() and rcu_batch_end() trace
messages that indicates the RCU type ("rcu_sched", "rcu_bh", or
"rcu_preempt"). The trace messages for the actual invocations
themselves are not marked, as it should be clear from the
rcu_batch_start() and rcu_batch_end() events before and after.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In order to allow event tracing to distinguish between flavors of
RCU, we need those names in the relevant RCU data structures. TINY_RCU
has avoided them for memory-footprint reasons, so add them only if
CONFIG_RCU_TRACE=y.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There was recently some controversy about the overhead of invoking RCU
callbacks. Add TRACE_EVENT()s to obtain fine-grained timings for the
start and stop of a batch of callbacks and also for each callback invoked.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull the code that waits for an RCU grace period into a single function,
which is then called by synchronize_rcu() and friends in the case of
TREE_RCU and TREE_PREEMPT_RCU, and from rcu_barrier() and friends in
the case of TINY_RCU and TINY_PREEMPT_RCU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit e66eed651f ("list: remove prefetching from regular list
iterators") removed the include of prefetch.h from list.h, which
uncovered several cases that had apparently relied on that rather
obscure header file dependency.
So this fixes things up a bit, using
grep -L linux/prefetch.h $(git grep -l '[^a-z_]prefetchw*(' -- '*.[ch]')
grep -L 'prefetchw*(' $(git grep -l 'linux/prefetch.h' -- '*.[ch]')
to guide us in finding files that either need <linux/prefetch.h>
inclusion, or have it despite not needing it.
There are more of them around (mostly network drivers), but this gets
many core ones.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rcu_sched_qs() currently calls local_irq_save()/local_irq_restore() up
to three times.
Remove irq masking from rcu_qsctr_help() / invoke_rcu_kthread()
and do it once in rcu_sched_qs() / rcu_bh_qs()
This generates smaller code as well.
text data bss dec hex filename
2314 156 24 2494 9be kernel/rcutiny.old.o
2250 156 24 2430 97e kernel/rcutiny.new.o
Fix an outdated comment for rcu_qsctr_help()
Move invoke_rcu_kthread() definition before its use.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Many rcu callbacks functions just call kfree() on the base structure.
These functions are trivial, but their size adds up, and furthermore
when they are used in a kernel module, that module must invoke the
high-latency rcu_barrier() function at module-unload time.
The kfree_rcu() function introduced by this commit addresses this issue.
Rather than encoding a function address in the embedded rcu_head
structure, kfree_rcu() instead encodes the offset of the rcu_head
structure within the base structure. Because the functions are not
allowed in the low-order 4096 bytes of kernel virtual memory, offsets
up to 4095 bytes can be accommodated. If the offset is larger than
4095 bytes, a compile-time error will be generated in __kfree_rcu().
If this error is triggered, you can either fall back to use of call_rcu()
or rearrange the structure to position the rcu_head structure into the
first 4096 bytes.
Note that the allowable offset might decrease in the future, for example,
to allow something like kmem_cache_free_rcu().
The new kfree_rcu() function can replace code as follows:
call_rcu(&p->rcu, simple_kfree_callback);
where "simple_kfree_callback()" might be defined as follows:
void simple_kfree_callback(struct rcu_head *p)
{
struct foo *q = container_of(p, struct foo, rcu);
kfree(q);
}
with the following:
kfree_rcu(&p->rcu, rcu);
Note that the "rcu" is the name of a field in the structure being
freed. The reason for using this rather than passing in a pointer
to the base structure is that the above approach allows better type
checking.
This commit is based on earlier work by Lai Jiangshan and Manfred Spraul:
Lai's V1 patch: http://lkml.org/lkml/2008/9/18/1
Manfred's patch: http://lkml.org/lkml/2009/1/2/115
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
If the RCU callback-processing kthread has nothing to do, it parks in
a wait_event(). If RCU remains idle for more than two minutes, the
kernel complains about this. This commit changes from wait_event()
to wait_event_interruptible() to prevent the kernel from complaining
just because RCU is idle.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Thomas Weber <weber@corscience.de>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add tracing for the tiny RCU implementations, including statistics on
boosting in the case of TINY_PREEMPT_RCU and RCU_BOOST.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Add priority boosting, but only for TINY_PREEMPT_RCU. This is enabled
by the default-off RCU_BOOST kernel parameter. The priority to which to
boost preempted RCU readers is controlled by the RCU_BOOST_PRIO kernel
parameter (defaulting to real-time priority 1) and the time to wait
before boosting the readers blocking a given grace period is controlled
by the RCU_BOOST_DELAY kernel parameter (defaulting to 500 milliseconds).
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If RCU priority boosting is to be meaningful, callback invocation must
be boosted in addition to preempted RCU readers. Otherwise, in presence
of CPU real-time threads, the grace period ends, but the callbacks don't
get invoked. If the callbacks don't get invoked, the associated memory
doesn't get freed, so the system is still subject to OOM.
But it is not reasonable to priority-boost RCU_SOFTIRQ, so this commit
moves the callback invocations to a kthread, which can be boosted easily.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Implement a small-memory-footprint uniprocessor-only implementation of
preemptible RCU. This implementation uses but a single blocked-tasks
list rather than the combinatorial number used per leaf rcu_node by
TREE_PREEMPT_RCU, which reduces memory consumption and greatly simplifies
processing. This version also takes advantage of uniprocessor execution
to accelerate grace periods in the case where there are no readers.
The general design is otherwise broadly similar to that of TREE_PREEMPT_RCU.
This implementation is a step towards having RCU implementation driven
off of the SMP and PREEMPT kernel configuration variables, which can
happen once this implementation has accumulated sufficient experience.
Removed ACCESS_ONCE() from __rcu_read_unlock() and added barrier() as
suggested by Steve Rostedt in order to avoid the compiler-reordering
issue noted by Mathieu Desnoyers (http://lkml.org/lkml/2010/8/16/183).
As can be seen below, CONFIG_TINY_PREEMPT_RCU represents almost 5Kbyte
savings compared to CONFIG_TREE_PREEMPT_RCU. Of course, for non-real-time
workloads, CONFIG_TINY_RCU is even better.
CONFIG_TREE_PREEMPT_RCU
text data bss dec filename
13 0 0 13 kernel/rcupdate.o
6170 825 28 7023 kernel/rcutree.o
----
7026 Total
CONFIG_TINY_PREEMPT_RCU
text data bss dec filename
13 0 0 13 kernel/rcupdate.o
2081 81 8 2170 kernel/rcutiny.o
----
2183 Total
CONFIG_TINY_RCU (non-preemptible)
text data bss dec filename
13 0 0 13 kernel/rcupdate.o
719 25 0 744 kernel/rcutiny.o
---
757 Total
Requested-by: Loïc Minier <loic.minier@canonical.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Helps finding racy users of call_rcu(), which results in hangs because list
entries are overwritten and/or skipped.
Changelog since v4:
- Bissectability is now OK
- Now generate a WARN_ON_ONCE() for non-initialized rcu_head passed to
call_rcu(). Statically initialized objects are detected with
object_is_static().
- Rename rcu_head_init_on_stack to init_rcu_head_on_stack.
- Remove init_rcu_head() completely.
Changelog since v3:
- Include comments from Lai Jiangshan
This new patch version is based on the debugobjects with the newly introduced
"active state" tracker.
Non-initialized entries are all considered as "statically initialized". An
activation fixup (triggered by call_rcu()) takes care of performing the debug
object initialization without issuing any warning. Since we cannot increase the
size of struct rcu_head, I don't see much room to put an identifier for
statically initialized rcu_head structures. So for now, we have to live without
"activation without explicit init" detection. But the main purpose of this debug
option is to detect double-activations (double call_rcu() use of a rcu_head
before the callback is executed), which is correctly addressed here.
This also detects potential internal RCU callback corruption, which would cause
the callbacks to be executed twice.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: David S. Miller <davem@davemloft.net>
CC: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
CC: akpm@linux-foundation.org
CC: mingo@elte.hu
CC: laijs@cn.fujitsu.com
CC: dipankar@in.ibm.com
CC: josh@joshtriplett.org
CC: dvhltc@us.ibm.com
CC: niv@us.ibm.com
CC: tglx@linutronix.de
CC: peterz@infradead.org
CC: rostedt@goodmis.org
CC: Valdis.Kletnieks@vt.edu
CC: dhowells@redhat.com
CC: eric.dumazet@gmail.com
CC: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Remove all rcu head inits. We don't care about the RCU head state before passing
it to call_rcu() anyway. Only leave the "on_stack" variants so debugobjects can
keep track of objects on stack.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
TINY_RCU does not need rcu_scheduler_active unless CONFIG_DEBUG_LOCK_ALLOC.
So conditionally compile rcu_scheduler_active in order to slim down
rcutiny a bit more. Also gets rid of an EXPORT_SYMBOL_GPL, which is
responsible for most of the slimming.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because synchronize_rcu_bh() is identical to synchronize_sched(),
make the former a static inline invoking the latter, saving the
overhead of an EXPORT_SYMBOL_GPL() and the duplicate code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This patch is a version of RCU designed for !SMP provided for a
small-footprint RCU implementation. In particular, the
implementation of synchronize_rcu() is extremely lightweight and
high performance. It passes rcutorture testing in each of the
four relevant configurations (combinations of NO_HZ and PREEMPT)
on x86. This saves about 1K bytes compared to old Classic RCU
(which is no longer in mainline), and more than three kilobytes
compared to Hierarchical RCU (updated to 2.6.30):
CONFIG_TREE_RCU:
text data bss dec filename
183 4 0 187 kernel/rcupdate.o
2783 520 36 3339 kernel/rcutree.o
3526 Total (vs 4565 for v7)
CONFIG_TREE_PREEMPT_RCU:
text data bss dec filename
263 4 0 267 kernel/rcupdate.o
4594 776 52 5422 kernel/rcutree.o
5689 Total (6155 for v7)
CONFIG_TINY_RCU:
text data bss dec filename
96 4 0 100 kernel/rcupdate.o
734 24 0 758 kernel/rcutiny.o
858 Total (vs 848 for v7)
The above is for x86. Your mileage may vary on other platforms.
Further compression is possible, but is being procrastinated.
Changes from v7 (http://lkml.org/lkml/2009/10/9/388)
o Apply Lai Jiangshan's review comments (aside from
might_sleep() in synchronize_sched(), which is covered by SMP builds).
o Fix up expedited primitives.
Changes from v6 (http://lkml.org/lkml/2009/9/23/293).
o Forward ported to put it into the 2.6.33 stream.
o Added lockdep support.
o Make lightweight rcu_barrier.
Changes from v5 (http://lkml.org/lkml/2009/6/23/12).
o Ported to latest pre-2.6.32 merge window kernel.
- Renamed rcu_qsctr_inc() to rcu_sched_qs().
- Renamed rcu_bh_qsctr_inc() to rcu_bh_qs().
- Provided trivial rcu_cpu_notify().
- Provided trivial exit_rcu().
- Provided trivial rcu_needs_cpu().
- Fixed up the rcu_*_enter/exit() functions in linux/hardirq.h.
o Removed the dependence on EMBEDDED, with a view to making
TINY_RCU default for !SMP at some time in the future.
o Added (trivial) support for expedited grace periods.
Changes from v4 (http://lkml.org/lkml/2009/5/2/91) include:
o Squeeze the size down a bit further by removing the
->completed field from struct rcu_ctrlblk.
o This permits synchronize_rcu() to become the empty function.
Previous concerns about rcutorture were unfounded, as
rcutorture correctly handles a constant value from
rcu_batches_completed() and rcu_batches_completed_bh().
Changes from v3 (http://lkml.org/lkml/2009/3/29/221) include:
o Changed rcu_batches_completed(), rcu_batches_completed_bh()
rcu_enter_nohz(), rcu_exit_nohz(), rcu_nmi_enter(), and
rcu_nmi_exit(), to be static inlines, as suggested by David
Howells. Doing this saves about 100 bytes from rcutiny.o.
(The numbers between v3 and this v4 of the patch are not directly
comparable, since they are against different versions of Linux.)
Changes from v2 (http://lkml.org/lkml/2009/2/3/333) include:
o Fix whitespace issues.
o Change short-circuit "||" operator to instead be "+" in order
to fix performance bug noted by "kraai" on LWN.
(http://lwn.net/Articles/324348/)
Changes from v1 (http://lkml.org/lkml/2009/1/13/440) include:
o This version depends on EMBEDDED as well as !SMP, as suggested
by Ingo.
o Updated rcu_needs_cpu() to unconditionally return zero,
permitting the CPU to enter dynticks-idle mode at any time.
This works because callbacks can be invoked upon entry to
dynticks-idle mode.
o Paul is now OK with this being included, based on a poll at
the Kernel Miniconf at linux.conf.au, where about ten people said
that they cared about saving 900 bytes on single-CPU systems.
o Applies to both mainline and tip/core/rcu.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: avi@redhat.com
Cc: mtosatti@redhat.com
LKML-Reference: <12565226351355-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
