Commit Graph

6 Commits

Author SHA1 Message Date
Arnd Bergmann
e9d47b7b31 lib: checksum: hide unused expected_csum_ipv6_magic[]
When CONFIG_NET is disabled, an extra warning shows up for this
unused variable:

lib/checksum_kunit.c:218:18: error: 'expected_csum_ipv6_magic' defined but not used [-Werror=unused-const-variable=]

Replace the #ifdef with an IS_ENABLED() check that makes the compiler's
dead-code-elimination take care of the link failure.

Fixes: f24a70106d ("lib: checksum: Fix build with CONFIG_NET=n")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08 11:03:05 +01:00
Christophe Leroy
3d6423ef8d kunit: Fix again checksum tests on big endian CPUs
Commit b38460bc46 ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cbcb ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.

So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.

Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 6f4c45cbcb ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-29 09:16:02 -08:00
Palmer Dabbelt
f24a70106d
lib: checksum: Fix build with CONFIG_NET=n
The generic ipv6 checksums are only defined with CONFIG_NET=y, so gate
the test as well.

Fixes: 6f4c45cbcb ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401192143.jLdjbIy3-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202401192357.WU4nPRdN-lkp@intel.com/
Reviewed-By: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240119145600.3093-2-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-19 08:12:38 -08:00
Charlie Jenkins
6f4c45cbcb
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
Supplement existing checksum tests with tests for csum_ipv6_magic and
ip_fast_csum.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240108-optimize_checksum-v15-5-1c50de5f2167@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-17 17:52:33 -08:00
Christophe Leroy
b38460bc46 kunit: Fix checksum tests on big endian CPUs
On powerpc64le checksum kunit tests work:

[    2.011457][    T1]     KTAP version 1
[    2.011662][    T1]     # Subtest: checksum
[    2.011848][    T1]     1..3
[    2.034710][    T1]     ok 1 test_csum_fixed_random_inputs
[    2.079325][    T1]     ok 2 test_csum_all_carry_inputs
[    2.127102][    T1]     ok 3 test_csum_no_carry_inputs
[    2.127202][    T1] # checksum: pass:3 fail:0 skip:0 total:3
[    2.127533][    T1] # Totals: pass:3 fail:0 skip:0 total:3
[    2.127956][    T1] ok 1 checksum

But on powerpc64 and powerpc32 they fail:

[    1.859890][    T1]     KTAP version 1
[    1.860041][    T1]     # Subtest: checksum
[    1.860201][    T1]     1..3
[    1.861927][   T58]     # test_csum_fixed_random_inputs: ASSERTION FAILED at lib/checksum_kunit.c:243
[    1.861927][   T58]     Expected result == expec, but
[    1.861927][   T58]         result == 54991 (0xd6cf)
[    1.861927][   T58]         expec == 33316 (0x8224)
[    1.863742][    T1]     not ok 1 test_csum_fixed_random_inputs
[    1.864520][   T60]     # test_csum_all_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:267
[    1.864520][   T60]     Expected result == expec, but
[    1.864520][   T60]         result == 255 (0xff)
[    1.864520][   T60]         expec == 65280 (0xff00)
[    1.868820][    T1]     not ok 2 test_csum_all_carry_inputs
[    1.869977][   T62]     # test_csum_no_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:306
[    1.869977][   T62]     Expected result == expec, but
[    1.869977][   T62]         result == 64515 (0xfc03)
[    1.869977][   T62]         expec == 0 (0x0)
[    1.872060][    T1]     not ok 3 test_csum_no_carry_inputs
[    1.872102][    T1] # checksum: pass:0 fail:3 skip:0 total:3
[    1.872458][    T1] # Totals: pass:0 fail:3 skip:0 total:3
[    1.872791][    T1] not ok 3 checksum

This is because all expected values were calculated for X86 which
is little endian. On big endian systems all precalculated 16 bits
halves must be byte swapped.

And this is confirmed by a huge amount of sparse errors when building
with C=2

So fix all sparse errors and it will naturally work on all endianness.

Fixes: 688eb8191b ("x86/csum: Improve performance of `csum_partial`")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-25 10:14:34 +01:00
Noah Goldstein
688eb8191b x86/csum: Improve performance of csum_partial
1) Add special case for len == 40 as that is the hottest value. The
   nets a ~8-9% latency improvement and a ~30% throughput improvement
   in the len == 40 case.

2) Use multiple accumulators in the 64-byte loop. This dramatically
   improves ILP and results in up to a 40% latency/throughput
   improvement (better for more iterations).

Results from benchmarking on Icelake. Times measured with rdtsc()
 len   lat_new   lat_old      r    tput_new  tput_old      r
   8      3.58      3.47  1.032        3.58      3.51  1.021
  16      4.14      4.02  1.028        3.96      3.78  1.046
  24      4.99      5.03  0.992        4.23      4.03  1.050
  32      5.09      5.08  1.001        4.68      4.47  1.048
  40      5.57      6.08  0.916        3.05      4.43  0.690
  48      6.65      6.63  1.003        4.97      4.69  1.059
  56      7.74      7.72  1.003        5.22      4.95  1.055
  64      6.65      7.22  0.921        6.38      6.42  0.994
  96      9.43      9.96  0.946        7.46      7.54  0.990
 128      9.39     12.15  0.773        8.90      8.79  1.012
 200     12.65     18.08  0.699       11.63     11.60  1.002
 272     15.82     23.37  0.677       14.43     14.35  1.005
 440     24.12     36.43  0.662       21.57     22.69  0.951
 952     46.20     74.01  0.624       42.98     53.12  0.809
1024     47.12     78.24  0.602       46.36     58.83  0.788
1552     72.01    117.30  0.614       71.92     96.78  0.743
2048     93.07    153.25  0.607       93.28    137.20  0.680
2600    114.73    194.30  0.590      114.28    179.32  0.637
3608    156.34    268.41  0.582      154.97    254.02  0.610
4096    175.01    304.03  0.576      175.89    292.08  0.602

There is no such thing as a free lunch, however, and the special case
for len == 40 does add overhead to the len != 40 cases. This seems to
amount to be ~5% throughput and slightly less in terms of latency.

Testing:
Part of this change is a new kunit test. The tests check all
alignment X length pairs in [0, 64) X [0, 512).
There are three cases.
    1) Precomputed random inputs/seed. The expected results where
       generated use the generic implementation (which is assumed to be
       non-buggy).
    2) An input of all 1s. The goal of this test is to catch any case
       a carry is missing.
    3) An input that never carries. The goal of this test si to catch
       any case of incorrectly carrying.

More exhaustive tests that test all alignment X length pairs in
[0, 8192) X [0, 8192] on random data are also available here:
https://github.com/goldsteinn/csum-reproduction

The reposity also has the code for reproducing the above benchmark
numbers.

Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20230511011002.935690-1-goldstein.w.n%40gmail.com
2023-05-25 10:55:18 -07:00