Commit Graph

667 Commits

Author SHA1 Message Date
Linus Torvalds
9187210eee Networking changes for 6.9.
Core & protocols
 ----------------
 
  - Large effort by Eric to lower rtnl_lock pressure and remove locks:
 
    - Make commonly used parts of rtnetlink (address, route dumps etc.)
      lockless, protected by RCU instead of rtnl_lock.
 
    - Add a netns exit callback which already holds rtnl_lock,
      allowing netns exit to take rtnl_lock once in the core
      instead of once for each driver / callback.
 
    - Remove locks / serialization in the socket diag interface.
 
    - Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
 
    - Remove the dev_base_lock, depend on RCU where necessary.
 
  - Support busy polling on a per-epoll context basis. Poll length
    and budget parameters can be set independently of system defaults.
 
  - Introduce struct net_hotdata, to make sure read-mostly global config
    variables fit in as few cache lines as possible.
 
  - Add optional per-nexthop statistics to ease monitoring / debug
    of ECMP imbalance problems.
 
  - Support TCP_NOTSENT_LOWAT in MPTCP.
 
  - Ensure that IPv6 temporary addresses' preferred lifetimes are long
    enough, compared to other configured lifetimes, and at least 2 sec.
 
  - Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
 
  - Add support for the independent control state machine for bonding
    per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
    control state machine.
 
  - Add "network ID" to MCTP socket APIs to support hosts with multiple
    disjoint MCTP networks.
 
  - Re-use the mono_delivery_time skbuff bit for packets which user
    space wants to be sent at a specified time. Maintain the timing
    information while traversing veth links, bridge etc.
 
  - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
 
  - Simplify many places iterating over netdevs by using an xarray
    instead of a hash table walk (hash table remains in place, for
    use on fastpaths).
 
  - Speed up scanning for expired routes by keeping a dedicated list.
 
  - Speed up "generic" XDP by trying harder to avoid large allocations.
 
  - Support attaching arbitrary metadata to netconsole messages.
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
    VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
 
  - Rework selftest harness to enable the use of the full range of
    ksft exit code (pass, fail, skip, xfail, xpass).
 
 Netfilter
 ---------
 
  - Allow userspace to define a table that is exclusively owned by a daemon
    (via netlink socket aliveness) without auto-removing this table when
    the userspace program exits. Such table gets marked as orphaned and
    a restarting management daemon can re-attach/regain ownership.
 
  - Speed up element insertions to nftables' concatenated-ranges set type.
    Compact a few related data structures.
 
 BPF
 ---
 
  - Add BPF token support for delegating a subset of BPF subsystem
    functionality from privileged system-wide daemons such as systemd
    through special mount options for userns-bound BPF fs to a trusted
    & unprivileged application.
 
  - Introduce bpf_arena which is sparse shared memory region between BPF
    program and user space where structures inside the arena can have
    pointers to other areas of the arena, and pointers work seamlessly
    for both user-space programs and BPF programs.
 
  - Introduce may_goto instruction that is a contract between the verifier
    and the program. The verifier allows the program to loop assuming it's
    behaving well, but reserves the right to terminate it.
 
  - Extend the BPF verifier to enable static subprog calls in spin lock
    critical sections.
 
  - Support registration of struct_ops types from modules which helps
    projects like fuse-bpf that seeks to implement a new struct_ops type.
 
  - Add support for retrieval of cookies for perf/kprobe multi links.
 
  - Support arbitrary TCP SYN cookie generation / validation in the TC
    layer with BPF to allow creating SYN flood handling in BPF firewalls.
 
  - Add code generation to inline the bpf_kptr_xchg() helper which
    improves performance when stashing/popping the allocated BPF objects.
 
 Wireless
 --------
 
  - Add SPP (signaling and payload protected) AMSDU support.
 
  - Support wider bandwidth OFDMA, as required for EHT operation.
 
 Driver API
 ----------
 
  - Major overhaul of the Energy Efficient Ethernet internals to support
    new link modes (2.5GE, 5GE), share more code between drivers
    (especially those using phylib), and encourage more uniform behavior.
    Convert and clean up drivers.
 
  - Define an API for querying per netdev queue statistics from drivers.
 
  - IPSec: account in global stats for fully offloaded sessions.
 
  - Create a concept of Ethernet PHY Packages at the Device Tree level,
    to allow parameterizing the existing PHY package code.
 
  - Enable Rx hashing (RSS) on GTP protocol fields.
 
 Misc
 ----
 
  - Improvements and refactoring all over networking selftests.
 
  - Create uniform module aliases for TC classifiers, actions,
    and packet schedulers to simplify creating modprobe policies.
 
  - Address all missing MODULE_DESCRIPTION() warnings in networking.
 
  - Extend the Netlink descriptions in YAML to cover message encapsulation
    or "Netlink polymorphism", where interpretation of nested attributes
    depends on link type, classifier type or some other "class type".
 
 Drivers
 -------
 
  - Ethernet high-speed NICs:
    - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
    - Intel (100G, ice, idpf):
      - support E825-C devices
    - nVidia/Mellanox:
      - support devices with one port and multiple PCIe links
    - Broadcom (bnxt):
      - support n-tuple filters
      - support configuring the RSS key
    - Wangxun (ngbe/txgbe):
      - implement irq_domain for TXGBE's sub-interrupts
    - Pensando/AMD:
      - support XDP
      - optimize queue submission and wakeup handling (+17% bps)
      - optimize struct layout, saving 28% of memory on queues
 
  - Ethernet NICs embedded and virtual:
    - Google cloud vNIC:
      - refactor driver to perform memory allocations for new queue
        config before stopping and freeing the old queue memory
    - Synopsys (stmmac):
      - obey queueMaxSDU and implement counters required by 802.1Qbv
    - Renesas (ravb):
      - support packet checksum offload
      - suspend to RAM and runtime PM support
 
  - Ethernet switches:
    - nVidia/Mellanox:
      - support for nexthop group statistics
    - Microchip:
      - ksz8: implement PHY loopback
      - add support for KSZ8567, a 7-port 10/100Mbps switch
 
  - PTP:
    - New driver for RENESAS FemtoClock3 Wireless clock generator.
    - Support OCP PTP cards designed and built by Adva.
 
  - CAN:
    - Support recvmsg() flags for own, local and remote traffic
      on CAN BCM sockets.
    - Support for esd GmbH PCIe/402 CAN device family.
    - m_can:
      - Rx/Tx submission coalescing
      - wake on frame Rx
 
  - WiFi:
    - Intel (iwlwifi):
      - enable signaling and payload protected A-MSDUs
      - support wider-bandwidth OFDMA
      - support for new devices
      - bump FW API to 89 for AX devices; 90 for BZ/SC devices
    - MediaTek (mt76):
      - mt7915: newer ADIE version support
      - mt7925: radio temperature sensor support
    - Qualcomm (ath11k):
      - support 6 GHz station power modes: Low Power Indoor (LPI),
        Standard Power) SP and Very Low Power (VLP)
      - QCA6390 & WCN6855: support 2 concurrent station interfaces
      - QCA2066 support
    - Qualcomm (ath12k):
      - refactoring in preparation for Multi-Link Operation (MLO) support
      - 1024 Block Ack window size support
      - firmware-2.bin support
      - support having multiple identical PCI devices (firmware needs to
        have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
      - QCN9274: support split-PHY devices
      - WCN7850: enable Power Save Mode in station mode
      - WCN7850: P2P support
    - RealTek:
      - rtw88: support for more rtw8811cu and rtw8821cu devices
      - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
      - rtlwifi: speed up USB firmware initialization
      - rtwl8xxxu:
        - RTL8188F: concurrent interface support
        - Channel Switch Announcement (CSA) support in AP mode
    - Broadcom (brcmfmac):
      - per-vendor feature support
      - per-vendor SAE password setup
      - DMI nvram filename quirk for ACEPC W5 Pro
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmXv0mgACgkQMUZtbf5S
 IrtgMxAAuRd+WJW++SENr4KxIWhYO1q6Xcxnai43wrNkan9swD24icG8TYALt4f3
 yoT6idQvWReAb5JNlh9rUQz8R7E0nJXlvEFn5MtJwcthx2C6wFo/XkJlddlRrT+j
 c2xGILwLjRhW65LaC0MZ2ECbEERkFz8xcGfK2SWzUgh6KYvPjcRfKFxugpM7xOQK
 P/Wnqhs4fVRS/Mj/bCcXcO+yhwC121Q3qVeQVjGS0AzEC65hAW87a/kc2BfgcegD
 EyI9R7mf6criQwX+0awubjfoIdr4oW/8oDVNvUDczkJkbaEVaLMQk9P5x/0XnnVS
 UHUchWXyI80Q8Rj12uN1/I0h3WtwNQnCRBuLSmtm6GLfCAwbLvp2nGWDnaXiqryW
 DVKUIHGvqPKjkOOMOVfSvfB3LvkS3xsFVVYiQBQCn0YSs/gtu4CoF2Nty9CiLPbK
 tTuxUnLdPDZDxU//l0VArZmP8p2JM7XQGJ+JH8GFH4SBTyBR23e0iyPSoyaxjnYn
 RReDnHMVsrS1i7GPhbqDJWn+uqMSs7N149i0XmmyeqwQHUVSJN3J2BApP2nCaDfy
 H2lTuYly5FfEezt61NvCE4qr/VsWeEjm1fYlFQ9dFn4pGn+HghyCpw+xD1ZN56DN
 lujemau5B3kk1UTtAT4ypPqvuqjkRFqpNV2LzsJSk/Js+hApw8Y=
 =oY52
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Large effort by Eric to lower rtnl_lock pressure and remove locks:

      - Make commonly used parts of rtnetlink (address, route dumps
        etc) lockless, protected by RCU instead of rtnl_lock.

      - Add a netns exit callback which already holds rtnl_lock,
        allowing netns exit to take rtnl_lock once in the core instead
        of once for each driver / callback.

      - Remove locks / serialization in the socket diag interface.

      - Remove 6 calls to synchronize_rcu() while holding rtnl_lock.

      - Remove the dev_base_lock, depend on RCU where necessary.

   - Support busy polling on a per-epoll context basis. Poll length and
     budget parameters can be set independently of system defaults.

   - Introduce struct net_hotdata, to make sure read-mostly global
     config variables fit in as few cache lines as possible.

   - Add optional per-nexthop statistics to ease monitoring / debug of
     ECMP imbalance problems.

   - Support TCP_NOTSENT_LOWAT in MPTCP.

   - Ensure that IPv6 temporary addresses' preferred lifetimes are long
     enough, compared to other configured lifetimes, and at least 2 sec.

   - Support forwarding of ICMP Error messages in IPSec, per RFC 4301.

   - Add support for the independent control state machine for bonding
     per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
     control state machine.

   - Add "network ID" to MCTP socket APIs to support hosts with multiple
     disjoint MCTP networks.

   - Re-use the mono_delivery_time skbuff bit for packets which user
     space wants to be sent at a specified time. Maintain the timing
     information while traversing veth links, bridge etc.

   - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.

   - Simplify many places iterating over netdevs by using an xarray
     instead of a hash table walk (hash table remains in place, for use
     on fastpaths).

   - Speed up scanning for expired routes by keeping a dedicated list.

   - Speed up "generic" XDP by trying harder to avoid large allocations.

   - Support attaching arbitrary metadata to netconsole messages.

  Things we sprinkled into general kernel code:

   - Enforce VM_IOREMAP flag and range in ioremap_page_range and
     introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
     bpf_arena).

   - Rework selftest harness to enable the use of the full range of ksft
     exit code (pass, fail, skip, xfail, xpass).

  Netfilter:

   - Allow userspace to define a table that is exclusively owned by a
     daemon (via netlink socket aliveness) without auto-removing this
     table when the userspace program exits. Such table gets marked as
     orphaned and a restarting management daemon can re-attach/regain
     ownership.

   - Speed up element insertions to nftables' concatenated-ranges set
     type. Compact a few related data structures.

  BPF:

   - Add BPF token support for delegating a subset of BPF subsystem
     functionality from privileged system-wide daemons such as systemd
     through special mount options for userns-bound BPF fs to a trusted
     & unprivileged application.

   - Introduce bpf_arena which is sparse shared memory region between
     BPF program and user space where structures inside the arena can
     have pointers to other areas of the arena, and pointers work
     seamlessly for both user-space programs and BPF programs.

   - Introduce may_goto instruction that is a contract between the
     verifier and the program. The verifier allows the program to loop
     assuming it's behaving well, but reserves the right to terminate
     it.

   - Extend the BPF verifier to enable static subprog calls in spin lock
     critical sections.

   - Support registration of struct_ops types from modules which helps
     projects like fuse-bpf that seeks to implement a new struct_ops
     type.

   - Add support for retrieval of cookies for perf/kprobe multi links.

   - Support arbitrary TCP SYN cookie generation / validation in the TC
     layer with BPF to allow creating SYN flood handling in BPF
     firewalls.

   - Add code generation to inline the bpf_kptr_xchg() helper which
     improves performance when stashing/popping the allocated BPF
     objects.

  Wireless:

   - Add SPP (signaling and payload protected) AMSDU support.

   - Support wider bandwidth OFDMA, as required for EHT operation.

  Driver API:

   - Major overhaul of the Energy Efficient Ethernet internals to
     support new link modes (2.5GE, 5GE), share more code between
     drivers (especially those using phylib), and encourage more
     uniform behavior. Convert and clean up drivers.

   - Define an API for querying per netdev queue statistics from
     drivers.

   - IPSec: account in global stats for fully offloaded sessions.

   - Create a concept of Ethernet PHY Packages at the Device Tree level,
     to allow parameterizing the existing PHY package code.

   - Enable Rx hashing (RSS) on GTP protocol fields.

  Misc:

   - Improvements and refactoring all over networking selftests.

   - Create uniform module aliases for TC classifiers, actions, and
     packet schedulers to simplify creating modprobe policies.

   - Address all missing MODULE_DESCRIPTION() warnings in networking.

   - Extend the Netlink descriptions in YAML to cover message
     encapsulation or "Netlink polymorphism", where interpretation of
     nested attributes depends on link type, classifier type or some
     other "class type".

  Drivers:

   - Ethernet high-speed NICs:
      - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
      - Intel (100G, ice, idpf):
         - support E825-C devices
      - nVidia/Mellanox:
         - support devices with one port and multiple PCIe links
      - Broadcom (bnxt):
         - support n-tuple filters
         - support configuring the RSS key
      - Wangxun (ngbe/txgbe):
         - implement irq_domain for TXGBE's sub-interrupts
      - Pensando/AMD:
         - support XDP
         - optimize queue submission and wakeup handling (+17% bps)
         - optimize struct layout, saving 28% of memory on queues

   - Ethernet NICs embedded and virtual:
      - Google cloud vNIC:
         - refactor driver to perform memory allocations for new queue
           config before stopping and freeing the old queue memory
      - Synopsys (stmmac):
         - obey queueMaxSDU and implement counters required by 802.1Qbv
      - Renesas (ravb):
         - support packet checksum offload
         - suspend to RAM and runtime PM support

   - Ethernet switches:
      - nVidia/Mellanox:
         - support for nexthop group statistics
      - Microchip:
         - ksz8: implement PHY loopback
         - add support for KSZ8567, a 7-port 10/100Mbps switch

   - PTP:
      - New driver for RENESAS FemtoClock3 Wireless clock generator.
      - Support OCP PTP cards designed and built by Adva.

   - CAN:
      - Support recvmsg() flags for own, local and remote traffic on CAN
        BCM sockets.
      - Support for esd GmbH PCIe/402 CAN device family.
      - m_can:
         - Rx/Tx submission coalescing
         - wake on frame Rx

   - WiFi:
      - Intel (iwlwifi):
         - enable signaling and payload protected A-MSDUs
         - support wider-bandwidth OFDMA
         - support for new devices
         - bump FW API to 89 for AX devices; 90 for BZ/SC devices
      - MediaTek (mt76):
         - mt7915: newer ADIE version support
         - mt7925: radio temperature sensor support
      - Qualcomm (ath11k):
         - support 6 GHz station power modes: Low Power Indoor (LPI),
           Standard Power) SP and Very Low Power (VLP)
         - QCA6390 & WCN6855: support 2 concurrent station interfaces
         - QCA2066 support
      - Qualcomm (ath12k):
         - refactoring in preparation for Multi-Link Operation (MLO)
           support
         - 1024 Block Ack window size support
         - firmware-2.bin support
         - support having multiple identical PCI devices (firmware needs
           to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
         - QCN9274: support split-PHY devices
         - WCN7850: enable Power Save Mode in station mode
         - WCN7850: P2P support
      - RealTek:
         - rtw88: support for more rtw8811cu and rtw8821cu devices
         - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
         - rtlwifi: speed up USB firmware initialization
         - rtwl8xxxu:
             - RTL8188F: concurrent interface support
             - Channel Switch Announcement (CSA) support in AP mode
      - Broadcom (brcmfmac):
         - per-vendor feature support
         - per-vendor SAE password setup
         - DMI nvram filename quirk for ACEPC W5 Pro"

* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
  nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
  nexthop: Fix out-of-bounds access during attribute validation
  nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
  nexthop: Only parse NHA_OP_FLAGS for get messages that require it
  bpf: move sleepable flag from bpf_prog_aux to bpf_prog
  bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
  selftests/bpf: Add kprobe multi triggering benchmarks
  ptp: Move from simple ida to xarray
  vxlan: Remove generic .ndo_get_stats64
  vxlan: Do not alloc tstats manually
  devlink: Add comments to use netlink gen tool
  nfp: flower: handle acti_netdevs allocation failure
  net/packet: Add getsockopt support for PACKET_COPY_THRESH
  net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
  selftests/bpf: Add bpf_arena_htab test.
  selftests/bpf: Add bpf_arena_list test.
  selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
  bpf: Add helper macro bpf_addr_space_cast()
  libbpf: Recognize __arena global variables.
  bpftool: Recognize arena map type
  ...
2024-03-12 17:44:08 -07:00
Linus Torvalds
045395d86a cgroup: Changes for 6.9
A quiet cycle. One trivial doc update patch. Two patches to drop now defunct
 memory_spread_slab feature from cgroup1 cpuset.
 -----BEGIN PGP SIGNATURE-----
 
 iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZe7MVQ4cdGpAa2VybmVs
 Lm9yZwAKCRCxYfJx3gVYGR59APwO8h/GCRH0KovpemkjsIHxicWMlvfHVleIdS4l
 FY7lLgD+JGucXcxd4YM/ZAZkj9pSUvrEm46n+Jrst7GFH8lfUQ0=
 =YY0C
 -----END PGP SIGNATURE-----

Merge tag 'cgroup-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

Pull cgroup updates from Tejun Heo:
 "A quiet cycle. One trivial doc update patch. Two patches to drop the
  now defunct memory_spread_slab feature from cgroup1 cpuset"

* tag 'cgroup-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/cpuset: Mark memory_spread_slab as obsolete
  cgroup/cpuset: Remove cpuset_do_slab_mem_spread()
  docs: cgroup-v1: add missing code-block tags
2024-03-11 13:13:22 -07:00
Jakub Kicinski
e3afe5dd3a Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.

No conflicts.

Adjacent changes:

net/core/page_pool_user.c
  0b11b1c5c3 ("netdev: let netlink core handle -EMSGSIZE errors")
  429679dcf7 ("page_pool: fix netlink dump stop/resume")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07 10:29:36 -08:00
Kamalesh Babulal
25125a4762 cgroup/cpuset: Fix retval in update_cpumask()
The update_cpumask(), checks for newly requested cpumask by calling
validate_change(), which returns an error on passing an invalid set
of cpu(s). Independent of the error returned, update_cpumask() always
returns zero, suppressing the error and returning success to the user
on writing an invalid cpu range for a cpuset. Fix it by returning
retval instead, which is returned by validate_change().

Fixes: 99fe36ba6f ("cgroup/cpuset: Improve temporary cpumasks handling")
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
2024-02-29 10:30:35 -10:00
Xiongwei Song
3ab67a9ce8 cgroup/cpuset: Mark memory_spread_slab as obsolete
We've removed the SLAB allocator, cpuset_do_slab_mem_spread() and
SLAB_MEM_SPREAD, memory_spread_slab is a no-op now. We can mark
memory_spread_slab as obsolete in case someone still wants to use it after
cpuset_do_slab_mem_spread() removed. For more details, please check [1].

[1] https://lore.kernel.org/lkml/32bc1403-49da-445a-8c00-9686a3b0d6a3@redhat.com/T/#m8e292e21b00f95a4bb8086371fa7387fa4ea8f60

tj: Description and cosmetic updates.

Signed-off-by: Xiongwei Song <xiongwei.song@windriver.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2024-02-29 10:28:19 -10:00
Waiman Long
66f40b926d cgroup/cpuset: Fix a memory leak in update_exclusive_cpumask()
Fix a possible memory leak in update_exclusive_cpumask() by moving the
alloc_cpumasks() down after the validate_change() check which can fail
and still before the temporary cpumasks are needed.

Fixes: e2ffe502ba ("cgroup/cpuset: Add cpuset.cpus.exclusive for v2")
Reported-and-tested-by: Mirsad Todorovac <mirsad.todorovac@alu.hr>
Closes: https://lore.kernel.org/lkml/14915689-27a3-4cd8-80d2-9c30d0c768b6@alu.unizg.hr
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v6.7+
2024-02-28 08:02:55 -10:00
Daniel Xu
6f3189f38a bpf: treewide: Annotate BPF kfuncs in BTF
This commit marks kfuncs as such inside the .BTF_ids section. The upshot
of these annotations is that we'll be able to automatically generate
kfunc prototypes for downstream users. The process is as follows:

1. In source, use BTF_KFUNCS_START/END macro pair to mark kfuncs
2. During build, pahole injects into BTF a "bpf_kfunc" BTF_DECL_TAG for
   each function inside BTF_KFUNCS sets
3. At runtime, vmlinux or module BTF is made available in sysfs
4. At runtime, bpftool (or similar) can look at provided BTF and
   generate appropriate prototypes for functions with "bpf_kfunc" tag

To ensure future kfunc are similarly tagged, we now also return error
inside kfunc registration for untagged kfuncs. For vmlinux kfuncs,
we also WARN(), as initcall machinery does not handle errors.

Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/e55150ceecbf0a5d961e608941165c0bee7bc943.1706491398.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-31 20:40:56 -08:00
Linus Torvalds
80955ae955 Driver core changes for 6.8-rc1
Here are the set of driver core and kernfs changes for 6.8-rc1.  Nothing
 major in here this release cycle, just lots of small cleanups and some
 tweaks on kernfs that in the very end, got reverted and will come back
 in a safer way next release cycle.
 
 Included in here are:
   - more driver core 'const' cleanups and fixes
   - fw_devlink=rpm is now the default behavior
   - kernfs tiny changes to remove some string functions
   - cpu handling in the driver core is updated to work better on many
     systems that add topologies and cpus after booting
   - other minor changes and cleanups
 
 All of the cpu handling patches have been acked by the respective
 maintainers and are coming in here in one series.  Everything has been
 in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeOrg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymtcwCffzvKKkSY9qAp6+0v2WQNkZm1JWoAoJCPYUwF
 If6wEoPLWvRfKx4gIoq9
 =D96r
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here are the set of driver core and kernfs changes for 6.8-rc1.
  Nothing major in here this release cycle, just lots of small cleanups
  and some tweaks on kernfs that in the very end, got reverted and will
  come back in a safer way next release cycle.

  Included in here are:

   - more driver core 'const' cleanups and fixes

   - fw_devlink=rpm is now the default behavior

   - kernfs tiny changes to remove some string functions

   - cpu handling in the driver core is updated to work better on many
     systems that add topologies and cpus after booting

   - other minor changes and cleanups

  All of the cpu handling patches have been acked by the respective
  maintainers and are coming in here in one series. Everything has been
  in linux-next for a while with no reported issues"

* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
  Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
  kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
  class: fix use-after-free in class_register()
  PM: clk: make pm_clk_add_notifier() take a const pointer
  EDAC: constantify the struct bus_type usage
  kernfs: fix reference to renamed function
  driver core: device.h: fix Excess kernel-doc description warning
  driver core: class: fix Excess kernel-doc description warning
  driver core: mark remaining local bus_type variables as const
  driver core: container: make container_subsys const
  driver core: bus: constantify subsys_register() calls
  driver core: bus: make bus_sort_breadthfirst() take a const pointer
  kernfs: d_obtain_alias(NULL) will do the right thing...
  driver core: Better advertise dev_err_probe()
  kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
  kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
  kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
  initramfs: Expose retained initrd as sysfs file
  fs/kernfs/dir: obey S_ISGID
  kernel/cgroup: use kernfs_create_dir_ns()
  ...
2024-01-18 09:48:40 -08:00
Linus Torvalds
9f8413c4a6 cgroup: Changes for v6.8
- Yafang Shao added task_get_cgroup1() helper to enable a similar BPF helper
   so that BPF progs can be more useful on cgroup1 hierarchies. While cgroup1
   is mostly in maintenance mode, this addition is very small while having an
   outsized usefulness for users who are still on cgroup1. Yafang also
   optimized root cgroup list access by making it RCU protected in the
   process.
 
 - Waiman Long optimized rstat operation leading to substantially lower and
   more consistent lock hold time while flushing the hierarchical statistics.
   As the lock can be acquired briefly in various hot paths, this reduction
   has cascading benefits.
 
 - Waiman also improved the quality of isolation for cpuset's isolated
   partitions. CPUs which are allocated to isolated partitions are now
   excluded from running unbound work items and cpu_is_isolated() test which
   is used by vmstat and memcg to reduce interference now includes cpuset
   isolated CPUs. While it isn't there yet, the hope is eventually reaching
   parity with the isolation level provided by the `isolcpus` boot param but
   in a dynamic manner.
 
   This involved a couple workqueue patches which were applied directly to
   cgroup/for-6.8 rather than ping-ponged through the wq tree. This was
   because the wq code change was small and the area is usually very static
   and unlikely to cause conflicts. However, luck had it that there was a wq
   bug fix in the area during the 6.7 cycle which caused a conflict. The
   conflict is contextual but can be a bit confusing to resolve, so there is
   one merge from wq/for-6.7-fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZYnuJg4cdGpAa2VybmVs
 Lm9yZwAKCRCxYfJx3gVYGQ5kAP9nMMWqi+R1HeG7+hWROTVjQZ0OM9KRcpZ1TmjF
 FNbkJgEAzt+sPnoWwYDTSI7pkNeZ/IM7x1qkkKGvENNtUXrz0Ac=
 =PyYN
 -----END PGP SIGNATURE-----

Merge tag 'cgroup-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

Pull cgroup updates from Tejun Heo:

 - Yafang Shao added task_get_cgroup1() helper to enable a similar BPF
   helper so that BPF progs can be more useful on cgroup1 hierarchies.
   While cgroup1 is mostly in maintenance mode, this addition is very
   small while having an outsized usefulness for users who are still on
   cgroup1. Yafang also optimized root cgroup list access by making it
   RCU protected in the process.

 - Waiman Long optimized rstat operation leading to substantially lower
   and more consistent lock hold time while flushing the hierarchical
   statistics. As the lock can be acquired briefly in various hot paths,
   this reduction has cascading benefits.

 - Waiman also improved the quality of isolation for cpuset's isolated
   partitions. CPUs which are allocated to isolated partitions are now
   excluded from running unbound work items and cpu_is_isolated() test
   which is used by vmstat and memcg to reduce interference now includes
   cpuset isolated CPUs. While it isn't there yet, the hope is
   eventually reaching parity with the isolation level provided by the
   `isolcpus` boot param but in a dynamic manner.

* tag 'cgroup-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Move rcu_head up near the top of cgroup_root
  cgroup/cpuset: Include isolated cpuset CPUs in cpu_is_isolated() check
  cgroup: Avoid false cacheline sharing of read mostly rstat_cpu
  cgroup/rstat: Optimize cgroup_rstat_updated_list()
  cgroup: Fix documentation for cpu.idle
  cgroup/cpuset: Expose cpuset.cpus.isolated
  workqueue: Move workqueue_set_unbound_cpumask() and its helpers inside CONFIG_SYSFS
  cgroup/rstat: Reduce cpu_lock hold time in cgroup_rstat_flush_locked()
  cgroup/cpuset: Take isolated CPUs out of workqueue unbound cpumask
  cgroup/cpuset: Keep track of CPUs in isolated partitions
  selftests/cgroup: Minor code cleanup and reorganization of test_cpuset_prs.sh
  workqueue: Add workqueue_unbound_exclude_cpumask() to exclude CPUs from wq_unbound_cpumask
  selftests: cgroup: Fixes a typo in a comment
  cgroup: Add a new helper for cgroup1 hierarchy
  cgroup: Add annotation for holding namespace_sem in current_cgns_cgroup_from_root()
  cgroup: Eliminate the need for cgroup_mutex in proc_cgroup_show()
  cgroup: Make operations on the cgroup root_list RCU safe
  cgroup: Remove unnecessary list_empty()
2024-01-08 20:04:02 -08:00
Kees Cook
ff6d413b0b kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
One of the last remaining users of strlcpy() in the kernel is
kernfs_path_from_node_locked(), which passes back the problematic "length
we _would_ have copied" return value to indicate truncation.  Convert the
chain of all callers to use the negative return value (some of which
already doing this explicitly). All callers were already also checking
for negative return values, so the risk to missed checks looks very low.

In this analysis, it was found that cgroup1_release_agent() actually
didn't handle the "too large" condition, so this is technically also a
bug fix. :)

Here's the chain of callers, and resolution identifying each one as now
handling the correct return value:

kernfs_path_from_node_locked()
        kernfs_path_from_node()
                pr_cont_kernfs_path()
                        returns void
                kernfs_path()
                        sysfs_warn_dup()
                                return value ignored
                        cgroup_path()
                                blkg_path()
                                        bfq_bic_update_cgroup()
                                                return value ignored
                                TRACE_IOCG_PATH()
                                        return value ignored
                                TRACE_CGROUP_PATH()
                                        return value ignored
                                perf_event_cgroup()
                                        return value ignored
                                task_group_path()
                                        return value ignored
                                damon_sysfs_memcg_path_eq()
                                        return value ignored
                                get_mm_memcg_path()
                                        return value ignored
                                lru_gen_seq_show()
                                        return value ignored
                        cgroup_path_from_kernfs_id()
                                return value ignored
                cgroup_show_path()
                        already converted "too large" error to negative value
                cgroup_path_ns_locked()
                        cgroup_path_ns()
                                bpf_iter_cgroup_show_fdinfo()
                                        return value ignored
                                cgroup1_release_agent()
                                        wasn't checking "too large" error
                        proc_cgroup_show()
                                already converted "too large" to negative value

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Waiman Long <longman@redhat.com>
Cc:  <cgroups@vger.kernel.org>
Co-developed-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Link: https://lore.kernel.org/r/20231116192127.1558276-3-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231212211741.164376-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 17:25:10 +01:00
Max Kellermann
fe3de0102b kernel/cgroup: use kernfs_create_dir_ns()
By passing the fsugid to kernfs_create_dir_ns(), we don't need
cgroup_kn_set_ugid() any longer.  That function was added for exactly
this purpose by commit 49957f8e2a ("cgroup: newly created dirs and
files should be owned by the creator").

Eliminating this piece of duplicate code means we benefit from future
improvements to kernfs_create_dir_ns(); for example, both are lacking
S_ISGID support currently, which my next patch will add to
kernfs_create_dir_ns().  It cannot (easily) be added to
cgroup_kn_set_ugid() because we can't dereference struct kernfs_iattrs
from there.

--
v1 -> v2: 12-digit commit id

Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231208093310.297233-1-max.kellermann@ionos.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-15 17:22:40 +01:00
Linus Torvalds
9ace34a8e4 cgroup: Fixes for v6.7-rc4
Just one patch.
 
 f5d39b0208 ("freezer,sched: Rewrite core freezer logic") changed how
 freezing state is recorded which cgroup_freezing() disagree with the actual
 state of the task while thawing triggering a warning. Fix it by updating
 cgroup_freezing().
 -----BEGIN PGP SIGNATURE-----
 
 iIMEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZXDMtQ4cdGpAa2VybmVs
 Lm9yZwAKCRCxYfJx3gVYGX2kAQDqVMZJ+fq3+nGYZNWdsCP+GtDOjsMf8GaadsMT
 e8Iu4QDzBo6QwRyFIA4glPQVWiTh3R35XeN0TCN1qEfCTYEICw==
 =F8Zn
 -----END PGP SIGNATURE-----

Merge tag 'cgroup-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

Pull cgroup fix from Tejun Heo:
 "Just one fix.

  Commit f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
  changed how freezing state is recorded which made cgroup_freezing()
  disagree with the actual state of the task while thawing triggering a
  warning. Fix it by updating cgroup_freezing()"

* tag 'cgroup-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup_freezer: cgroup_freezing: Check if not frozen
2023-12-07 12:42:40 -08:00
Waiman Long
3232e7aad1 cgroup/cpuset: Include isolated cpuset CPUs in cpu_is_isolated() check
Currently, the cpu_is_isolated() function checks only the statically
isolated CPUs specified via the "isolcpus" and "nohz_full" kernel
command line options. This function is used by vmstat and memcg to
reduce interference with isolated CPUs by not doing stat flushing
or scheduling works on those CPUs.

Workloads running on isolated CPUs within isolated cpuset
partitions should receive the same treatment to reduce unnecessary
interference. This patch introduces a new cpuset_cpu_is_isolated()
function to be called by cpu_is_isolated() so that the set of dynamically
created cpuset isolated CPUs will be included in the check.

Assuming that testing a bit in a cpumask is atomic, no synchronization
primitive is currently used to synchronize access to the cpuset's
isolated_cpus mask.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-12-06 09:37:28 -10:00
Waiman Long
d499fd418f cgroup/rstat: Optimize cgroup_rstat_updated_list()
The current design of cgroup_rstat_cpu_pop_updated() is to traverse
the updated tree in a way to pop out the leaf nodes first before
their parents. This can cause traversal of multiple nodes before a
leaf node can be found and popped out. IOW, a given node in the tree
can be visited multiple times before the whole operation is done. So
it is not very efficient and the code can be hard to read.

With the introduction of cgroup_rstat_updated_list() to build a list
of cgroups to be flushed first before any flushing operation is being
done, we can optimize the way the updated tree nodes are being popped
by pushing the parents first to the tail end of the list before their
children. In this way, most updated tree nodes will be visited only
once with the exception of the subtree root as we still need to go
back to its parent and popped it out of its updated_children list.
This also makes the code easier to read.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-12-01 07:40:04 -10:00
Tim Van Patten
cff5f49d43 cgroup_freezer: cgroup_freezing: Check if not frozen
__thaw_task() was recently updated to warn if the task being thawed was
part of a freezer cgroup that is still currently freezing:

	void __thaw_task(struct task_struct *p)
	{
	...
		if (WARN_ON_ONCE(freezing(p)))
			goto unlock;

This has exposed a bug in cgroup1 freezing where when CGROUP_FROZEN is
asserted, the CGROUP_FREEZING bits are not also cleared at the same
time. Meaning, when a cgroup is marked FROZEN it continues to be marked
FREEZING as well. This causes the WARNING to trigger, because
cgroup_freezing() thinks the cgroup is still freezing.

There are two ways to fix this:

1. Whenever FROZEN is set, clear FREEZING for the cgroup and all
children cgroups.
2. Update cgroup_freezing() to also verify that FROZEN is not set.

This patch implements option (2), since it's smaller and more
straightforward.

Signed-off-by: Tim Van Patten <timvp@google.com>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-11-28 08:04:03 -10:00
Waiman Long
877c737db9 cgroup/cpuset: Expose cpuset.cpus.isolated
The root-only cpuset.cpus.isolated control file shows the current set
of isolated CPUs in isolated partitions. This control file is currently
exposed only with the cgroup_debug boot command line option which also
adds the ".__DEBUG__." prefix. This is actually a useful control file if
users want to find out which CPUs are currently in an isolated state by
the cpuset controller. Remove CFTYPE_DEBUG flag for this control file and
make it available by default without any prefix.

The test_cpuset_prs.sh test script and the cgroup-v2.rst documentation
file are also updated accordingly. Minor code change is also made in
test_cpuset_prs.sh to avoid false test failure when running on debug
kernel.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-11-28 06:45:11 -10:00
Johannes Weiner
8b39d20ece sched: psi: fix unprivileged polling against cgroups
519fabc7aa ("psi: remove 500ms min window size limitation for
triggers") breaks unprivileged psi polling on cgroups.

Historically, we had a privilege check for polling in the open() of a
pressure file in /proc, but were erroneously missing it for the open()
of cgroup pressure files.

When unprivileged polling was introduced in d82caa2735 ("sched/psi:
Allow unprivileged polling of N*2s period"), it needed to filter
privileges depending on the exact polling parameters, and as such
moved the CAP_SYS_RESOURCE check from the proc open() callback to
psi_trigger_create(). Both the proc files as well as cgroup files go
through this during write(). This implicitly added the missing check
for privileges required for HT polling for cgroups.

When 519fabc7aa ("psi: remove 500ms min window size limitation for
triggers") followed right after to remove further restrictions on the
RT polling window, it incorrectly assumed the cgroup privilege check
was still missing and added it to the cgroup open(), mirroring what we
used to do for proc files in the past.

As a result, unprivileged poll requests that would be supported now
get rejected when opening the cgroup pressure file for writing.

Remove the cgroup open() check. psi_trigger_create() handles it.

Fixes: 519fabc7aa ("psi: remove 500ms min window size limitation for triggers")
Reported-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: stable@vger.kernel.org # 6.5+
Link: https://lore.kernel.org/r/20231026164114.2488682-1-hannes@cmpxchg.org
2023-11-14 22:27:00 +01:00
Waiman Long
e76d28bdf9 cgroup/rstat: Reduce cpu_lock hold time in cgroup_rstat_flush_locked()
When cgroup_rstat_updated() isn't being called concurrently with
cgroup_rstat_flush_locked(), its run time is pretty short. When
both are called concurrently, the cgroup_rstat_updated() run time
can spike to a pretty high value due to high cpu_lock hold time in
cgroup_rstat_flush_locked(). This can be problematic if the task calling
cgroup_rstat_updated() is a realtime task running on an isolated CPU
with a strict latency requirement. The cgroup_rstat_updated() call can
happen when there is a page fault even though the task is running in
user space most of the time.

The percpu cpu_lock is used to protect the update tree -
updated_next and updated_children. This protection is only needed when
cgroup_rstat_cpu_pop_updated() is being called. The subsequent flushing
operation which can take a much longer time does not need that protection
as it is already protected by cgroup_rstat_lock.

To reduce the cpu_lock hold time, we need to perform all the
cgroup_rstat_cpu_pop_updated() calls up front with the lock
released afterward before doing any flushing. This patch adds a new
cgroup_rstat_updated_list() function to return a singly linked list of
cgroups to be flushed.

Some instrumentation code are added to measure the cpu_lock hold time
right after lock acquisition to after releasing the lock. Parallel
kernel build on a 2-socket x86-64 server is used as the benchmarking
tool for measuring the lock hold time.

The maximum cpu_lock hold time before and after the patch are 100us and
29us respectively. So the worst case time is reduced to about 30% of
the original. However, there may be some OS or hardware noises like NMI
or SMI in the test system that can worsen the worst case value. Those
noises are usually tuned out in a real production environment to get
a better result.

OTOH, the lock hold time frequency distribution should give a better
idea of the performance benefit of the patch.  Below were the frequency
distribution before and after the patch:

     Hold time        Before patch       After patch
     ---------        ------------       -----------
       0-01 us           804,139         13,738,708
      01-05 us         9,772,767          1,177,194
      05-10 us         4,595,028              4,984
      10-15 us           303,481              3,562
      15-20 us            78,971              1,314
      20-25 us            24,583                 18
      25-30 us             6,908                 12
      30-40 us             8,015
      40-50 us             2,192
      50-60 us               316
      60-70 us                43
      70-80 us                 7
      80-90 us                 2
        >90 us                 3

Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-11-12 15:23:07 -06:00
Waiman Long
72c6303acf cgroup/cpuset: Take isolated CPUs out of workqueue unbound cpumask
To make CPUs in isolated cpuset partition closer in isolation to
the boot time isolated CPUs specified in the "isolcpus" boot command
line option, we need to take those CPUs out of the workqueue unbound
cpumask so that work functions from the unbound workqueues won't run
on those CPUs.  Otherwise, they will interfere the user tasks running
on those isolated CPUs.

With the introduction of the workqueue_unbound_exclude_cpumask() helper
function in an earlier commit, those isolated CPUs can now be taken
out from the workqueue unbound cpumask.

This patch also updates cgroup-v2.rst to mention that isolated
CPUs will be excluded from unbound workqueue cpumask as well as
updating test_cpuset_prs.sh to verify the correctness of the new
*cpuset.cpus.isolated file, if available via cgroup_debug option.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-11-12 15:07:41 -06:00
Waiman Long
11e5f407b6 cgroup/cpuset: Keep track of CPUs in isolated partitions
Add a new internal isolated_cpus mask to keep track of the CPUs that are in
isolated partitions. Expose that new cpumask as a new root-only control file
".cpuset.cpus.isolated".

tj: Updated patch description to reflect dropping __DEBUG__ prefix.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-11-12 15:07:41 -06:00
Linus Torvalds
89cdf9d556 Including fixes from netfilter and bpf.
Current release - regressions:
 
  - sched: fix SKB_NOT_DROPPED_YET splat under debug config
 
 Current release - new code bugs:
 
  - tcp: fix usec timestamps with TCP fastopen
 
  - tcp_sigpool: fix some off by one bugs
 
  - tcp: fix possible out-of-bounds reads in tcp_hash_fail()
 
  - tcp: fix SYN option room calculation for TCP-AO
 
  - bpf: fix compilation error without CGROUPS
 
  - ptp:
    - ptp_read() should not release queue
    - fix tsevqs corruption
 
 Previous releases - regressions:
 
  - llc: verify mac len before reading mac header
 
 Previous releases - always broken:
 
  - bpf:
    - fix check_stack_write_fixed_off() to correctly spill imm
    - fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
    - check map->usercnt after timer->timer is assigned
 
  - dsa: lan9303: consequently nested-lock physical MDIO
 
  - dccp/tcp: call security_inet_conn_request() after setting IP addr
 
  - tg3: fix the TX ring stall due to incorrect full ring handling
 
  - phylink: initialize carrier state at creation
 
  - ice: fix direction of VF rules in switchdev mode
 
 Misc:
 
  - fill in a bunch of missing MODULE_DESCRIPTION()s, more to come
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmVNRnAACgkQMUZtbf5S
 IrsYaA/+IUoYi96/oLtvvrET6HIbXeMaLKef0UlytEicQKy8h5EWlhcTZPhQEY0g
 dtaKOemQsO0dQTma4eQBiBDHeCeSkitgD9p7fh0i+//QFYWSFqHrBiF2mlToc/ZQ
 T1p4BlVL7D2Xsr1Lki93zk+EhFGEy2KroYgrWbZc9TWE5ap9PtSVF9eqeHAVCmZ7
 ocre/eo4pqUM9rAHIAyhoL+0xtVQ59dBevbJC0qYcmflhafr82Gtdveo6pBBKuYm
 GhwbRrAXER3Neav9c6NHqat4zsMwGpC27SiN9dYWm6dlkeS9U9t2PUu71OkJGVfw
 VaSE+utkC/WmzGbuiUIjqQLBrRe372ItHCr78BfSRMshS+RBTHtoK7njeH8Iv67E
 RsMeCyVNj9dtGlOQG5JAv8IoCQ1WbMw9B36Yzw3ip/MmDX/ntXz7Dcr4ZMZ6VURS
 CHhHFZPnmMykMXkT6SIlxeAg2r8ELtESzkvLimdTVFPAlk3cPkibKJbh3F/tEqXS
 PDb3y0uoEgRQBAsWXXx9FQEvv9rTL6YrzbMhmJBIIEoNxppQYQ7FZBJX9utAVp5B
 1GdyqhR6IRTaKb9cMRj/K1xPwm2KgCw9xj9pjKdAA7QUMslXbFp8blv1rIkFGshg
 hiNXmPcI8wo0j+0lZYktEcIERL5y6c8BgK2NnPU6RULua96tuQ4=
 =k6Wk
 -----END PGP SIGNATURE-----

Merge tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - sched: fix SKB_NOT_DROPPED_YET splat under debug config

  Current release - new code bugs:

   - tcp:
       - fix usec timestamps with TCP fastopen
       - fix possible out-of-bounds reads in tcp_hash_fail()
       - fix SYN option room calculation for TCP-AO

   - tcp_sigpool: fix some off by one bugs

   - bpf: fix compilation error without CGROUPS

   - ptp:
       - ptp_read() should not release queue
       - fix tsevqs corruption

  Previous releases - regressions:

   - llc: verify mac len before reading mac header

  Previous releases - always broken:

   - bpf:
       - fix check_stack_write_fixed_off() to correctly spill imm
       - fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
       - check map->usercnt after timer->timer is assigned

   - dsa: lan9303: consequently nested-lock physical MDIO

   - dccp/tcp: call security_inet_conn_request() after setting IP addr

   - tg3: fix the TX ring stall due to incorrect full ring handling

   - phylink: initialize carrier state at creation

   - ice: fix direction of VF rules in switchdev mode

  Misc:

   - fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"

* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  net: ti: icss-iep: fix setting counter value
  ptp: fix corrupted list in ptp_open
  ptp: ptp_read should not release queue
  net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
  net: kcm: fill in MODULE_DESCRIPTION()
  net/sched: act_ct: Always fill offloading tuple iifidx
  netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
  netfilter: xt_recent: fix (increase) ipv6 literal buffer length
  ipvs: add missing module descriptions
  netfilter: nf_tables: remove catchall element in GC sync path
  netfilter: add missing module descriptions
  drivers/net/ppp: use standard array-copy-function
  net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
  virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
  r8169: respect userspace disabling IFF_MULTICAST
  selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
  bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
  net: phylink: initialize carrier state at creation
  test/vsock: add dobule bind connect test
  test/vsock: refactor vsock_accept
  ...
2023-11-09 17:09:35 -08:00
Yafang Shao
aecd408b7e cgroup: Add a new helper for cgroup1 hierarchy
A new helper is added for cgroup1 hierarchy:

- task_get_cgroup1
  Acquires the associated cgroup of a task within a specific cgroup1
  hierarchy. The cgroup1 hierarchy is identified by its hierarchy ID.

This helper function is added to facilitate the tracing of tasks within
a particular container or cgroup dir in BPF programs. It's important to
note that this helper is designed specifically for cgroup1 only.

tj: Use irsqsave/restore as suggested by Hou Tao <houtao@huaweicloud.com>.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-11-09 13:25:47 -10:00
Yafang Shao
0008454e8f cgroup: Add annotation for holding namespace_sem in current_cgns_cgroup_from_root()
When I initially examined the function current_cgns_cgroup_from_root(), I
was perplexed by its lack of holding cgroup_mutex. However, after Michal
explained the reason[0] to me, I realized that it already holds the
namespace_sem. I believe this intricacy could also confuse others, so it
would be advisable to include an annotation for clarification.

After we replace the cgroup_mutex with RCU read lock, if current doesn't
hold the namespace_sem, the root cgroup will be NULL. So let's add a
WARN_ON_ONCE() for it.

[0]. https://lore.kernel.org/bpf/afdnpo3jz2ic2ampud7swd6so5carkilts2mkygcaw67vbw6yh@5b5mncf7qyet

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Michal Koutny <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-11-09 13:25:47 -10:00
Yafang Shao
9067d90006 cgroup: Eliminate the need for cgroup_mutex in proc_cgroup_show()
The cgroup root_list is already RCU-safe. Therefore, we can replace the
cgroup_mutex with the RCU read lock in some particular paths. This change
will be particularly beneficial for frequent operations, such as
`cat /proc/self/cgroup`, in a cgroup1-based container environment.

I did stress tests with this change, as outlined below
(with CONFIG_PROVE_RCU_LIST enabled):

- Continuously mounting and unmounting named cgroups in some tasks,
  for example:

  cgrp_name=$1
  while true
  do
      mount -t cgroup -o none,name=$cgrp_name none /$cgrp_name
      umount /$cgrp_name
  done

- Continuously triggering proc_cgroup_show() in some tasks concurrently,
  for example:
  while true; do cat /proc/self/cgroup > /dev/null; done

They can ran successfully after implementing this change, with no RCU
warnings in dmesg.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-11-09 13:25:47 -10:00
Yafang Shao
d23b5c5777 cgroup: Make operations on the cgroup root_list RCU safe
At present, when we perform operations on the cgroup root_list, we must
hold the cgroup_mutex, which is a relatively heavyweight lock. In reality,
we can make operations on this list RCU-safe, eliminating the need to hold
the cgroup_mutex during traversal. Modifications to the list only occur in
the cgroup root setup and destroy paths, which should be infrequent in a
production environment. In contrast, traversal may occur frequently.
Therefore, making it RCU-safe would be beneficial.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-11-09 13:25:47 -10:00
Yafang Shao
96a2b48e5e cgroup: Remove unnecessary list_empty()
The root hasn't been removed from the root_list, so the list can't be NULL.
However, if it had been removed, attempting to destroy it once more is not
possible. Let's replace this with WARN_ON_ONCE() for clarity.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-11-09 13:25:46 -10:00
Linus Torvalds
ecae0bd517 Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
 
 - Kemeng Shi has contributed some compation maintenance work in the
   series "Fixes and cleanups to compaction".
 
 - Joel Fernandes has a patchset ("Optimize mremap during mutual
   alignment within PMD") which fixes an obscure issue with mremap()'s
   pagetable handling during a subsequent exec(), based upon an
   implementation which Linus suggested.
 
 - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
   following patch series:
 
 	mm/damon: misc fixups for documents, comments and its tracepoint
 	mm/damon: add a tracepoint for damos apply target regions
 	mm/damon: provide pseudo-moving sum based access rate
 	mm/damon: implement DAMOS apply intervals
 	mm/damon/core-test: Fix memory leaks in core-test
 	mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
 
 - In the series "Do not try to access unaccepted memory" Adrian Hunter
   provides some fixups for the recently-added "unaccepted memory' feature.
   To increase the feature's checking coverage.  "Plug a few gaps where
   RAM is exposed without checking if it is unaccepted memory".
 
 - In the series "cleanups for lockless slab shrink" Qi Zheng has done
   some maintenance work which is preparation for the lockless slab
   shrinking code.
 
 - Qi Zheng has redone the earlier (and reverted) attempt to make slab
   shrinking lockless in the series "use refcount+RCU method to implement
   lockless slab shrink".
 
 - David Hildenbrand contributes some maintenance work for the rmap code
   in the series "Anon rmap cleanups".
 
 - Kefeng Wang does more folio conversions and some maintenance work in
   the migration code.  Series "mm: migrate: more folio conversion and
   unification".
 
 - Matthew Wilcox has fixed an issue in the buffer_head code which was
   causing long stalls under some heavy memory/IO loads.  Some cleanups
   were added on the way.  Series "Add and use bdev_getblk()".
 
 - In the series "Use nth_page() in place of direct struct page
   manipulation" Zi Yan has fixed a potential issue with the direct
   manipulation of hugetlb page frames.
 
 - In the series "mm: hugetlb: Skip initialization of gigantic tail
   struct pages if freed by HVO" has improved our handling of gigantic
   pages in the hugetlb vmmemmep optimizaton code.  This provides
   significant boot time improvements when significant amounts of gigantic
   pages are in use.
 
 - Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
   rationalization and folio conversions in the hugetlb code.
 
 - Yin Fengwei has improved mlock()'s handling of large folios in the
   series "support large folio for mlock"
 
 - In the series "Expose swapcache stat for memcg v1" Liu Shixin has
   added statistics for memcg v1 users which are available (and useful)
   under memcg v2.
 
 - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
   prctl so that userspace may direct the kernel to not automatically
   propagate the denial to child processes.  The series is named "MDWE
   without inheritance".
 
 - Kefeng Wang has provided the series "mm: convert numa balancing
   functions to use a folio" which does what it says.
 
 - In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
   makes is possible for a process to propagate KSM treatment across
   exec().
 
 - Huang Ying has enhanced memory tiering's calculation of memory
   distances.  This is used to permit the dax/kmem driver to use "high
   bandwidth memory" in addition to Optane Data Center Persistent Memory
   Modules (DCPMM).  The series is named "memory tiering: calculate
   abstract distance based on ACPI HMAT"
 
 - In the series "Smart scanning mode for KSM" Stefan Roesch has
   optimized KSM by teaching it to retain and use some historical
   information from previous scans.
 
 - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
   series "mm: memcg: fix tracking of pending stats updates values".
 
 - In the series "Implement IOCTL to get and optionally clear info about
   PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
   us to atomically read-then-clear page softdirty state.  This is mainly
   used by CRIU.
 
 - Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
   - a bunch of relatively minor maintenance tweaks to this code.
 
 - Matthew Wilcox has increased the use of the VMA lock over file-backed
   page faults in the series "Handle more faults under the VMA lock".  Some
   rationalizations of the fault path became possible as a result.
 
 - In the series "mm/rmap: convert page_move_anon_rmap() to
   folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
   and folio conversions.
 
 - In the series "various improvements to the GUP interface" Lorenzo
   Stoakes has simplified and improved the GUP interface with an eye to
   providing groundwork for future improvements.
 
 - Andrey Konovalov has sent along the series "kasan: assorted fixes and
   improvements" which does those things.
 
 - Some page allocator maintenance work from Kemeng Shi in the series
   "Two minor cleanups to break_down_buddy_pages".
 
 - In thes series "New selftest for mm" Breno Leitao has developed
   another MM self test which tickles a race we had between madvise() and
   page faults.
 
 - In the series "Add folio_end_read" Matthew Wilcox provides cleanups
   and an optimization to the core pagecache code.
 
 - Nhat Pham has added memcg accounting for hugetlb memory in the series
   "hugetlb memcg accounting".
 
 - Cleanups and rationalizations to the pagemap code from Lorenzo
   Stoakes, in the series "Abstract vma_merge() and split_vma()".
 
 - Audra Mitchell has fixed issues in the procfs page_owner code's new
   timestamping feature which was causing some misbehaviours.  In the
   series "Fix page_owner's use of free timestamps".
 
 - Lorenzo Stoakes has fixed the handling of new mappings of sealed files
   in the series "permit write-sealed memfd read-only shared mappings".
 
 - Mike Kravetz has optimized the hugetlb vmemmap optimization in the
   series "Batch hugetlb vmemmap modification operations".
 
 - Some buffer_head folio conversions and cleanups from Matthew Wilcox in
   the series "Finish the create_empty_buffers() transition".
 
 - As a page allocator performance optimization Huang Ying has added
   automatic tuning to the allocator's per-cpu-pages feature, in the series
   "mm: PCP high auto-tuning".
 
 - Roman Gushchin has contributed the patchset "mm: improve performance
   of accounted kernel memory allocations" which improves their performance
   by ~30% as measured by a micro-benchmark.
 
 - folio conversions from Kefeng Wang in the series "mm: convert page
   cpupid functions to folios".
 
 - Some kmemleak fixups in Liu Shixin's series "Some bugfix about
   kmemleak".
 
 - Qi Zheng has improved our handling of memoryless nodes by keeping them
   off the allocation fallback list.  This is done in the series "handle
   memoryless nodes more appropriately".
 
 - khugepaged conversions from Vishal Moola in the series "Some
   khugepaged folio conversions".
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
 jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
 FgeUPAD1oasg6CP+INZvCj34waNxwAc=
 =E+Y4
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:
 "Many singleton patches against the MM code. The patch series which are
  included in this merge do the following:

   - Kemeng Shi has contributed some compation maintenance work in the
     series 'Fixes and cleanups to compaction'

   - Joel Fernandes has a patchset ('Optimize mremap during mutual
     alignment within PMD') which fixes an obscure issue with mremap()'s
     pagetable handling during a subsequent exec(), based upon an
     implementation which Linus suggested

   - More DAMON/DAMOS maintenance and feature work from SeongJae Park i
     the following patch series:

	mm/damon: misc fixups for documents, comments and its tracepoint
	mm/damon: add a tracepoint for damos apply target regions
	mm/damon: provide pseudo-moving sum based access rate
	mm/damon: implement DAMOS apply intervals
	mm/damon/core-test: Fix memory leaks in core-test
	mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval

   - In the series 'Do not try to access unaccepted memory' Adrian
     Hunter provides some fixups for the recently-added 'unaccepted
     memory' feature. To increase the feature's checking coverage. 'Plug
     a few gaps where RAM is exposed without checking if it is
     unaccepted memory'

   - In the series 'cleanups for lockless slab shrink' Qi Zheng has done
     some maintenance work which is preparation for the lockless slab
     shrinking code

   - Qi Zheng has redone the earlier (and reverted) attempt to make slab
     shrinking lockless in the series 'use refcount+RCU method to
     implement lockless slab shrink'

   - David Hildenbrand contributes some maintenance work for the rmap
     code in the series 'Anon rmap cleanups'

   - Kefeng Wang does more folio conversions and some maintenance work
     in the migration code. Series 'mm: migrate: more folio conversion
     and unification'

   - Matthew Wilcox has fixed an issue in the buffer_head code which was
     causing long stalls under some heavy memory/IO loads. Some cleanups
     were added on the way. Series 'Add and use bdev_getblk()'

   - In the series 'Use nth_page() in place of direct struct page
     manipulation' Zi Yan has fixed a potential issue with the direct
     manipulation of hugetlb page frames

   - In the series 'mm: hugetlb: Skip initialization of gigantic tail
     struct pages if freed by HVO' has improved our handling of gigantic
     pages in the hugetlb vmmemmep optimizaton code. This provides
     significant boot time improvements when significant amounts of
     gigantic pages are in use

   - Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
     rationalization and folio conversions in the hugetlb code

   - Yin Fengwei has improved mlock()'s handling of large folios in the
     series 'support large folio for mlock'

   - In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
     added statistics for memcg v1 users which are available (and
     useful) under memcg v2

   - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
     prctl so that userspace may direct the kernel to not automatically
     propagate the denial to child processes. The series is named 'MDWE
     without inheritance'

   - Kefeng Wang has provided the series 'mm: convert numa balancing
     functions to use a folio' which does what it says

   - In the series 'mm/ksm: add fork-exec support for prctl' Stefan
     Roesch makes is possible for a process to propagate KSM treatment
     across exec()

   - Huang Ying has enhanced memory tiering's calculation of memory
     distances. This is used to permit the dax/kmem driver to use 'high
     bandwidth memory' in addition to Optane Data Center Persistent
     Memory Modules (DCPMM). The series is named 'memory tiering:
     calculate abstract distance based on ACPI HMAT'

   - In the series 'Smart scanning mode for KSM' Stefan Roesch has
     optimized KSM by teaching it to retain and use some historical
     information from previous scans

   - Yosry Ahmed has fixed some inconsistencies in memcg statistics in
     the series 'mm: memcg: fix tracking of pending stats updates
     values'

   - In the series 'Implement IOCTL to get and optionally clear info
     about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
     which permits us to atomically read-then-clear page softdirty
     state. This is mainly used by CRIU

   - Hugh Dickins contributed the series 'shmem,tmpfs: general
     maintenance', a bunch of relatively minor maintenance tweaks to
     this code

   - Matthew Wilcox has increased the use of the VMA lock over
     file-backed page faults in the series 'Handle more faults under the
     VMA lock'. Some rationalizations of the fault path became possible
     as a result

   - In the series 'mm/rmap: convert page_move_anon_rmap() to
     folio_move_anon_rmap()' David Hildenbrand has implemented some
     cleanups and folio conversions

   - In the series 'various improvements to the GUP interface' Lorenzo
     Stoakes has simplified and improved the GUP interface with an eye
     to providing groundwork for future improvements

   - Andrey Konovalov has sent along the series 'kasan: assorted fixes
     and improvements' which does those things

   - Some page allocator maintenance work from Kemeng Shi in the series
     'Two minor cleanups to break_down_buddy_pages'

   - In thes series 'New selftest for mm' Breno Leitao has developed
     another MM self test which tickles a race we had between madvise()
     and page faults

   - In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
     and an optimization to the core pagecache code

   - Nhat Pham has added memcg accounting for hugetlb memory in the
     series 'hugetlb memcg accounting'

   - Cleanups and rationalizations to the pagemap code from Lorenzo
     Stoakes, in the series 'Abstract vma_merge() and split_vma()'

   - Audra Mitchell has fixed issues in the procfs page_owner code's new
     timestamping feature which was causing some misbehaviours. In the
     series 'Fix page_owner's use of free timestamps'

   - Lorenzo Stoakes has fixed the handling of new mappings of sealed
     files in the series 'permit write-sealed memfd read-only shared
     mappings'

   - Mike Kravetz has optimized the hugetlb vmemmap optimization in the
     series 'Batch hugetlb vmemmap modification operations'

   - Some buffer_head folio conversions and cleanups from Matthew Wilcox
     in the series 'Finish the create_empty_buffers() transition'

   - As a page allocator performance optimization Huang Ying has added
     automatic tuning to the allocator's per-cpu-pages feature, in the
     series 'mm: PCP high auto-tuning'

   - Roman Gushchin has contributed the patchset 'mm: improve
     performance of accounted kernel memory allocations' which improves
     their performance by ~30% as measured by a micro-benchmark

   - folio conversions from Kefeng Wang in the series 'mm: convert page
     cpupid functions to folios'

   - Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
     kmemleak'

   - Qi Zheng has improved our handling of memoryless nodes by keeping
     them off the allocation fallback list. This is done in the series
     'handle memoryless nodes more appropriately'

   - khugepaged conversions from Vishal Moola in the series 'Some
     khugepaged folio conversions'"

[ bcachefs conflicts with the dynamically allocated shrinkers have been
  resolved as per Stephen Rothwell in

     https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/

  with help from Qi Zheng.

  The clone3 test filtering conflict was half-arsed by yours truly ]

* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
  mm/damon/sysfs: update monitoring target regions for online input commit
  mm/damon/sysfs: remove requested targets when online-commit inputs
  selftests: add a sanity check for zswap
  Documentation: maple_tree: fix word spelling error
  mm/vmalloc: fix the unchecked dereference warning in vread_iter()
  zswap: export compression failure stats
  Documentation: ubsan: drop "the" from article title
  mempolicy: migration attempt to match interleave nodes
  mempolicy: mmap_lock is not needed while migrating folios
  mempolicy: alloc_pages_mpol() for NUMA policy without vma
  mm: add page_rmappable_folio() wrapper
  mempolicy: remove confusing MPOL_MF_LAZY dead code
  mempolicy: mpol_shared_policy_init() without pseudo-vma
  mempolicy trivia: use pgoff_t in shared mempolicy tree
  mempolicy trivia: slightly more consistent naming
  mempolicy trivia: delete those ancient pr_debug()s
  mempolicy: fix migrate_pages(2) syscall return nr_failed
  kernfs: drop shared NUMA mempolicy hooks
  hugetlbfs: drop shared NUMA mempolicy pretence
  mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
  ...
2023-11-02 19:38:47 -10:00
Dave Marchevsky
15fb6f2b6c bpf: Add __bpf_hook_{start,end} macros
Not all uses of __diag_ignore_all(...) in BPF-related code in order to
suppress warnings are wrapping kfunc definitions. Some "hook point"
definitions - small functions meant to be used as attach points for
fentry and similar BPF progs - need to suppress -Wmissing-declarations.

We could use __bpf_kfunc_{start,end}_defs added in the previous patch in
such cases, but this might be confusing to someone unfamiliar with BPF
internals. Instead, this patch adds __bpf_hook_{start,end} macros,
currently having the same effect as __bpf_kfunc_{start,end}_defs, then
uses them to suppress warnings for two hook points in the kernel itself
and some bpf_testmod hook points as well.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231031215625.2343848-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-01 22:33:53 -07:00
Linus Torvalds
89ed67ef12 Networking changes for 6.7.
Core & protocols
 ----------------
 
  - Support usec resolution of TCP timestamps, enabled selectively by
    a route attribute.
 
  - Defer regular TCP ACK while processing socket backlog, try to send
    a cumulative ACK at the end. Increase single TCP flow performance
    on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
 
  - The Fair Queuing (FQ) packet scheduler:
    - add built-in 3 band prio / WRR scheduling
    - support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
    - improve inactive flow reporting
    - optimize the layout of structures for better cache locality
 
  - Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
    replacement for the old MD5 option.
 
  - Add more retransmission timeout (RTO) related statistics to TCP_INFO.
 
  - Support sending fragmented skbs over vsock sockets.
 
  - Make sure we send SIGPIPE for vsock sockets if socket was shutdown().
 
  - Add sysctl for ignoring lower limit on lifetime in Router
    Advertisement PIO, based on an in-progress IETF draft.
 
  - Add sysctl to control activation of TCP ping-pong mode.
 
  - Add sysctl to make connection timeout in MPTCP configurable.
 
  - Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
    limit the number of wakeups.
 
  - Support netlink GET for MDB (multicast forwarding), allowing user
    space to request a single MDB entry instead of dumping the entire
    table.
 
  - Support selective FDB flushing in the VXLAN tunnel driver.
 
  - Allow limiting learned FDB entries in bridges, prevent OOM attacks.
 
  - Allow controlling via configfs netconsole targets which were created
    via the kernel cmdline at boot, rather than via configfs at runtime.
 
  - Support multiple PTP timestamp event queue readers with different
    filters.
 
  - MCTP over I3C.
 
 BPF
 ---
 
  - Add new veth-like netdevice where BPF program defines the logic
    of the xmit routine. It can operate in L3 and L2 mode.
 
  - Support exceptions - allow asserting conditions which should
    never be true but are hard for the verifier to infer.
    With some extra flexibility around handling of the exit / failure.
    https://lwn.net/Articles/938435/
 
  - Add support for local per-cpu kptr, allow allocating and storing
    per-cpu objects in maps. Access to those objects operates on
    the value for the current CPU. This allows to deprecate local
    one-off implementations of per-CPU storage like
    BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
 
  - Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
    for systemd to re-implement the LogNamespace feature which allows
    running multiple instances of systemd-journald to process the logs
    of different services.
 
  - Enable open-coded task_vma iteration, after maple tree conversion
    made it hard to directly walk VMAs in tracing programs.
 
  - Add open-coded task, css_task and css iterator support.
    One of the use cases is customizable OOM victim selection via BPF.
 
  - Allow source address selection with bpf_*_fib_lookup().
 
  - Add ability to pin BPF timer to the current CPU.
 
  - Prevent creation of infinite loops by combining tail calls and
    fentry/fexit programs.
 
  - Add missed stats for kprobes to retrieve the number of missed kprobe
    executions and subsequent executions of BPF programs.
 
  - Inherit system settings for CPU security mitigations.
 
  - Add BPF v4 CPU instruction support for arm32 and s390x.
 
 Changes to common code
 ----------------------
 
  - overflow: add DEFINE_FLEX() for on-stack definition of structs
    with flexible array members.
 
  - Process doc update with more guidance for reviewers.
 
 Driver API
 ----------
 
  - Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
    mutex in most places and remove a lot of smaller locks.
 
  - Create a common DPLL configuration API. Allow configuring
    and querying state of PLL circuits used for clock syntonization,
    in network time distribution.
 
  - Unify fragmented and full page allocation APIs in page pool code.
    Let drivers be ignorant of PAGE_SIZE.
 
  - Rework PHY state machine to avoid races with calls to phy_stop().
 
  - Notify DSA drivers of MAC address changes on user ports, improve
    correctness of offloads which depend on matching port MAC addresses.
 
  - Allow antenna control on injected WiFi frames.
 
  - Reduce the number of variants of napi_schedule().
 
  - Simplify error handling when composing devlink health messages.
 
 Misc
 ----
 
  - A lot of KCSAN data race "fixes", from Eric.
 
  - A lot of __counted_by() annotations, from Kees.
 
  - A lot of strncpy -> strscpy and printf format fixes.
 
  - Replace master/slave terminology with conduit/user in DSA drivers.
 
  - Handful of KUnit tests for netdev and WiFi core.
 
 Removed
 -------
 
  - AppleTalk COPS.
 
  - AppleTalk ipddp.
 
  - TI AR7 CPMAC Ethernet driver.
 
 Drivers
 -------
 
  - Ethernet high-speed NICs:
    - Intel (100G, ice, idpf):
      - add a driver for the Intel E2000 IPUs
      - make CRC/FCS stripping configurable
      - cross-timestamping for E823 devices
      - basic support for E830 devices
      - use aux-bus for managing client drivers
      - i40e: report firmware versions via devlink
    - nVidia/Mellanox:
      - support 4-port NICs
      - increase max number of channels to 256
      - optimize / parallelize SF creation flow
    - Broadcom (bnxt):
      - enhance NIC temperature reporting
      - support PAM4 speeds and lane configuration
    - Marvell OcteonTX2:
      - PTP pulse-per-second output support
      - enable hardware timestamping for VFs
    - Solarflare/AMD:
      - conntrack NAT offload and offload for tunnels
    - Wangxun (ngbe/txgbe):
      - expose HW statistics
    - Pensando/AMD:
      - support PCI level reset
      - narrow down the condition under which skbs are linearized
    - Netronome/Corigine (nfp):
      - support CHACHA20-POLY1305 crypto in IPsec offload
 
  - Ethernet NICs embedded, slower, virtual:
    - Synopsys (stmmac):
      - add Loongson-1 SoC support
      - enable use of HW queues with no offload capabilities
      - enable PPS input support on all 5 channels
      - increase TX coalesce timer to 5ms
    - RealTek USB (r8152): improve efficiency of Rx by using GRO frags
    - xen: support SW packet timestamping
    - add drivers for implementations based on TI's PRUSS (AM64x EVM)
 
  - nVidia/Mellanox Ethernet datacenter switches:
    - avoid poor HW resource use on Spectrum-4 by better block selection
      for IPv6 multicast forwarding and ordering of blocks in ACL region
 
  - Ethernet embedded switches:
    - Microchip:
      - support configuring the drive strength for EMI compliance
      - ksz9477: partial ACL support
      - ksz9477: HSR offload
      - ksz9477: Wake on LAN
    - Realtek:
      - rtl8366rb: respect device tree config of the CPU port
 
  - Ethernet PHYs:
    - support Broadcom BCM5221 PHYs
    - TI dp83867: support hardware LED blinking
 
  - CAN:
    - add support for Linux-PHY based CAN transceivers
    - at91_can: clean up and use rx-offload helpers
 
  - WiFi:
    - MediaTek (mt76):
      - new sub-driver for mt7925 USB/PCIe devices
      - HW wireless <> Ethernet bridging in MT7988 chips
      - mt7603/mt7628 stability improvements
    - Qualcomm (ath12k):
      - WCN7850:
        - enable 320 MHz channels in 6 GHz band
        - hardware rfkill support
        - enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS
          to make scan faster
        - read board data variant name from SMBIOS
      - QCN9274: mesh support
    - RealTek (rtw89):
      - TDMA-based multi-channel concurrency (MCC)
    - Silicon Labs (wfx):
      - Remain-On-Channel (ROC) support
 
  - Bluetooth:
    - ISO: many improvements for broadcast support
    - mark BCM4378/BCM4387 as BROKEN_LE_CODED
    - add support for QCA2066
    - btmtksdio: enable Bluetooth wakeup from suspend
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmU8XsYACgkQMUZtbf5S
 Irv19RAAnud/24OOF5XMEJkIcYlnfqximh4XO6PujRSYkSkOUJdZTF6iJPgf3pSP
 YpwoHYbYKHYfeOf8+3bTNESiQNSnoVmvmvwiS6/7lZ3behHUrGLQzW9Htc3EZyWH
 2h6QkDZ5OOjfg0bwYSfp3vXkmMH2k8WE9Y0NvCkhcohqZi13Rmp14RnyPmNb2d1V
 yZRYDMSM133KqE6gnBr1Ct65IEvnKeGlCUN2mTGqOJgdn6DZMsyxvtt0y4rmN7Ab
 41+CgPU5SfxfbYpW+Dl2HJpgfte3WrC57KC6AM0PAPJzPmQWgeB/m9mjz/apj6Bg
 bhsEIo7FdvbCnQm3yWPhK2OgCAcSwLr8jfGMU+Q+W4VnL5SRRR3Rm0zjsze+kHNP
 OfqJgxzl3DpvoJqVBy1h5FGcZt0XHwhksm4cTxWqIahsF+veY0ECBXbuBBQx9XTF
 Y7INfI8ulg7wISJs+CJfIClYkgOibTw2u8taBS5ikbtgxNqp5D4QqODn7UefQap1
 PR/IDYODF+zRgmMJLeBqSa6fij6BkfOEDiOWak5kggBoZdtbtmeKI6tzze06CNdW
 lWv1WEhRufxnwK+IuWsEkjhiMbs2WGLvkJ5JbgQV9BfqHfIfiqBCrcWtT/WbQnGt
 lmU46CXh1t/FZEqbmK9h+8vsIIfrcDl6jb5npEiKPRG00vDKRTM=
 =46nS
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Support usec resolution of TCP timestamps, enabled selectively by a
     route attribute.

   - Defer regular TCP ACK while processing socket backlog, try to send
     a cumulative ACK at the end. Increase single TCP flow performance
     on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).

   - The Fair Queuing (FQ) packet scheduler:
       - add built-in 3 band prio / WRR scheduling
       - support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
       - improve inactive flow reporting
       - optimize the layout of structures for better cache locality

   - Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
     replacement for the old MD5 option.

   - Add more retransmission timeout (RTO) related statistics to
     TCP_INFO.

   - Support sending fragmented skbs over vsock sockets.

   - Make sure we send SIGPIPE for vsock sockets if socket was
     shutdown().

   - Add sysctl for ignoring lower limit on lifetime in Router
     Advertisement PIO, based on an in-progress IETF draft.

   - Add sysctl to control activation of TCP ping-pong mode.

   - Add sysctl to make connection timeout in MPTCP configurable.

   - Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
     limit the number of wakeups.

   - Support netlink GET for MDB (multicast forwarding), allowing user
     space to request a single MDB entry instead of dumping the entire
     table.

   - Support selective FDB flushing in the VXLAN tunnel driver.

   - Allow limiting learned FDB entries in bridges, prevent OOM attacks.

   - Allow controlling via configfs netconsole targets which were
     created via the kernel cmdline at boot, rather than via configfs at
     runtime.

   - Support multiple PTP timestamp event queue readers with different
     filters.

   - MCTP over I3C.

  BPF:

   - Add new veth-like netdevice where BPF program defines the logic of
     the xmit routine. It can operate in L3 and L2 mode.

   - Support exceptions - allow asserting conditions which should never
     be true but are hard for the verifier to infer. With some extra
     flexibility around handling of the exit / failure:

          https://lwn.net/Articles/938435/

   - Add support for local per-cpu kptr, allow allocating and storing
     per-cpu objects in maps. Access to those objects operates on the
     value for the current CPU.

     This allows to deprecate local one-off implementations of per-CPU
     storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.

   - Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
     for systemd to re-implement the LogNamespace feature which allows
     running multiple instances of systemd-journald to process the logs
     of different services.

   - Enable open-coded task_vma iteration, after maple tree conversion
     made it hard to directly walk VMAs in tracing programs.

   - Add open-coded task, css_task and css iterator support. One of the
     use cases is customizable OOM victim selection via BPF.

   - Allow source address selection with bpf_*_fib_lookup().

   - Add ability to pin BPF timer to the current CPU.

   - Prevent creation of infinite loops by combining tail calls and
     fentry/fexit programs.

   - Add missed stats for kprobes to retrieve the number of missed
     kprobe executions and subsequent executions of BPF programs.

   - Inherit system settings for CPU security mitigations.

   - Add BPF v4 CPU instruction support for arm32 and s390x.

  Changes to common code:

   - overflow: add DEFINE_FLEX() for on-stack definition of structs with
     flexible array members.

   - Process doc update with more guidance for reviewers.

  Driver API:

   - Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
     mutex in most places and remove a lot of smaller locks.

   - Create a common DPLL configuration API. Allow configuring and
     querying state of PLL circuits used for clock syntonization, in
     network time distribution.

   - Unify fragmented and full page allocation APIs in page pool code.
     Let drivers be ignorant of PAGE_SIZE.

   - Rework PHY state machine to avoid races with calls to phy_stop().

   - Notify DSA drivers of MAC address changes on user ports, improve
     correctness of offloads which depend on matching port MAC
     addresses.

   - Allow antenna control on injected WiFi frames.

   - Reduce the number of variants of napi_schedule().

   - Simplify error handling when composing devlink health messages.

  Misc:

   - A lot of KCSAN data race "fixes", from Eric.

   - A lot of __counted_by() annotations, from Kees.

   - A lot of strncpy -> strscpy and printf format fixes.

   - Replace master/slave terminology with conduit/user in DSA drivers.

   - Handful of KUnit tests for netdev and WiFi core.

  Removed:

   - AppleTalk COPS.

   - AppleTalk ipddp.

   - TI AR7 CPMAC Ethernet driver.

  Drivers:

   - Ethernet high-speed NICs:
      - Intel (100G, ice, idpf):
         - add a driver for the Intel E2000 IPUs
         - make CRC/FCS stripping configurable
         - cross-timestamping for E823 devices
         - basic support for E830 devices
         - use aux-bus for managing client drivers
         - i40e: report firmware versions via devlink
      - nVidia/Mellanox:
         - support 4-port NICs
         - increase max number of channels to 256
         - optimize / parallelize SF creation flow
      - Broadcom (bnxt):
         - enhance NIC temperature reporting
         - support PAM4 speeds and lane configuration
      - Marvell OcteonTX2:
         - PTP pulse-per-second output support
         - enable hardware timestamping for VFs
      - Solarflare/AMD:
         - conntrack NAT offload and offload for tunnels
      - Wangxun (ngbe/txgbe):
         - expose HW statistics
      - Pensando/AMD:
         - support PCI level reset
         - narrow down the condition under which skbs are linearized
      - Netronome/Corigine (nfp):
         - support CHACHA20-POLY1305 crypto in IPsec offload

   - Ethernet NICs embedded, slower, virtual:
      - Synopsys (stmmac):
         - add Loongson-1 SoC support
         - enable use of HW queues with no offload capabilities
         - enable PPS input support on all 5 channels
         - increase TX coalesce timer to 5ms
      - RealTek USB (r8152): improve efficiency of Rx by using GRO frags
      - xen: support SW packet timestamping
      - add drivers for implementations based on TI's PRUSS (AM64x EVM)

   - nVidia/Mellanox Ethernet datacenter switches:
      - avoid poor HW resource use on Spectrum-4 by better block
        selection for IPv6 multicast forwarding and ordering of blocks
        in ACL region

   - Ethernet embedded switches:
      - Microchip:
         - support configuring the drive strength for EMI compliance
         - ksz9477: partial ACL support
         - ksz9477: HSR offload
         - ksz9477: Wake on LAN
      - Realtek:
         - rtl8366rb: respect device tree config of the CPU port

   - Ethernet PHYs:
      - support Broadcom BCM5221 PHYs
      - TI dp83867: support hardware LED blinking

   - CAN:
      - add support for Linux-PHY based CAN transceivers
      - at91_can: clean up and use rx-offload helpers

   - WiFi:
      - MediaTek (mt76):
         - new sub-driver for mt7925 USB/PCIe devices
         - HW wireless <> Ethernet bridging in MT7988 chips
         - mt7603/mt7628 stability improvements
      - Qualcomm (ath12k):
         - WCN7850:
            - enable 320 MHz channels in 6 GHz band
            - hardware rfkill support
            - enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
              make scan faster
            - read board data variant name from SMBIOS
        - QCN9274: mesh support
      - RealTek (rtw89):
         - TDMA-based multi-channel concurrency (MCC)
      - Silicon Labs (wfx):
         - Remain-On-Channel (ROC) support

   - Bluetooth:
      - ISO: many improvements for broadcast support
      - mark BCM4378/BCM4387 as BROKEN_LE_CODED
      - add support for QCA2066
      - btmtksdio: enable Bluetooth wakeup from suspend"

* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
  net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
  net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
  net: mana: Use xdp_set_features_flag instead of direct assignment
  vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
  iavf: delete the iavf client interface
  iavf: add a common function for undoing the interrupt scheme
  iavf: use unregister_netdev
  iavf: rely on netdev's own registered state
  iavf: fix the waiting time for initial reset
  iavf: in iavf_down, don't queue watchdog_task if comms failed
  iavf: simplify mutex_trylock+sleep loops
  iavf: fix comments about old bit locks
  doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
  tools: ynl: introduce option to process unknown attributes or types
  ipvlan: properly track tx_errors
  netdevsim: Block until all devices are released
  nfp: using napi_build_skb() to replace build_skb()
  net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
  net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
  net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
  ...
2023-10-31 05:10:11 -10:00
Linus Torvalds
5a6a09e971 cgroup: Changes for v6.7
* cpuset now supports remote partitions where CPUs can be reserved for
   exclusive use down the tree without requiring all the intermediate nodes
   to be partitions. This makes it easier to use partitions without modifying
   existing cgroup hierarchy.
 
 * cpuset partition configuration behavior improvement.
 
 * cgroup_favordynmods= boot param added to allow setting the flag on boot on
   cgroup1.
 
 * Misc code and doc updates.
 -----BEGIN PGP SIGNATURE-----
 
 iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZUBUKA4cdGpAa2VybmVs
 Lm9yZwAKCRCxYfJx3gVYGWfMAP9WP+Z21qzzL2bY5I5kOxu+rD2fF9ORk7azILrI
 c3gXSQD/bdxNWcdtrCQMvs+ToNEJvqDFxrmgG5uRUF8Ea+FCtQ8=
 =gZj2
 -----END PGP SIGNATURE-----

Merge tag 'cgroup-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

Pull cgroup updates from Tejun Heo:

 - cpuset now supports remote partitions where CPUs can be reserved for
   exclusive use down the tree without requiring all the intermediate
   nodes to be partitions. This makes it easier to use partitions
   without modifying existing cgroup hierarchy.

 - cpuset partition configuration behavior improvement

 - cgroup_favordynmods= boot param added to allow setting the flag on
   boot on cgroup1

 - Misc code and doc updates

* tag 'cgroup-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs/cgroup: Add the list of threaded controllers to cgroup-v2.rst
  cgroup: use legacy_name for cgroup v1 disable info
  cgroup/cpuset: Cleanup signedness issue in cpu_exclusive_check()
  cgroup/cpuset: Enable invalid to valid local partition transition
  cgroup: add cgroup_favordynmods= command-line option
  cgroup/cpuset: Extend test_cpuset_prs.sh to test remote partition
  cgroup/cpuset: Documentation update for partition
  cgroup/cpuset: Check partition conflict with housekeeping setup
  cgroup/cpuset: Introduce remote partition
  cgroup/cpuset: Add cpuset.cpus.exclusive for v2
  cgroup/cpuset: Add cpuset.cpus.exclusive.effective for v2
  cgroup/cpuset: Fix load balance state in update_partition_sd_lb()
  cgroup: Avoid extra dereference in css_populate_dir()
  cgroup: Check for ret during cgroup1_base_files cft addition
2023-10-30 20:58:48 -10:00
Jakub Kicinski
c6f9b7138b bpf-next-for-netdev
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZTp12QAKCRDbK58LschI
 g8BrAQDifqp5liEEdXV8jdReBwJtqInjrL5tzy5LcyHUMQbTaAEA6Ph3Ct3B+3oA
 mFnIW/y6UJiJrby0Xz4+vV5BXI/5WQg=
 =pLCV
 -----END PGP SIGNATURE-----

Merge tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2023-10-26

We've added 51 non-merge commits during the last 10 day(s) which contain
a total of 75 files changed, 5037 insertions(+), 200 deletions(-).

The main changes are:

1) Add open-coded task, css_task and css iterator support.
   One of the use cases is customizable OOM victim selection via BPF,
   from Chuyi Zhou.

2) Fix BPF verifier's iterator convergence logic to use exact states
   comparison for convergence checks, from Eduard Zingerman,
   Andrii Nakryiko and Alexei Starovoitov.

3) Add BPF programmable net device where bpf_mprog defines the logic
   of its xmit routine. It can operate in L3 and L2 mode,
   from Daniel Borkmann and Nikolay Aleksandrov.

4) Batch of fixes for BPF per-CPU kptr and re-enable unit_size checking
   for global per-CPU allocator, from Hou Tao.

5) Fix libbpf which eagerly assumed that SHT_GNU_verdef ELF section
   was going to be present whenever a binary has SHT_GNU_versym section,
   from Andrii Nakryiko.

6) Fix BPF ringbuf correctness to fold smp_mb__before_atomic() into
   atomic_set_release(), from Paul E. McKenney.

7) Add a warning if NAPI callback missed xdp_do_flush() under
   CONFIG_DEBUG_NET which helps checking if drivers were missing
   the former, from Sebastian Andrzej Siewior.

8) Fix missed RCU read-lock in bpf_task_under_cgroup() which was throwing
   a warning under sleepable programs, from Yafang Shao.

9) Avoid unnecessary -EBUSY from htab_lock_bucket by disabling IRQ before
   checking map_locked, from Song Liu.

10) Make BPF CI linked_list failure test more robust,
    from Kumar Kartikeya Dwivedi.

11) Enable samples/bpf to be built as PIE in Fedora, from Viktor Malik.

12) Fix xsk starving when multiple xsk sockets were associated with
    a single xsk_buff_pool, from Albert Huang.

13) Clarify the signed modulo implementation for the BPF ISA standardization
    document that it uses truncated division, from Dave Thaler.

14) Improve BPF verifier's JEQ/JNE branch taken logic to also consider
    signed bounds knowledge, from Andrii Nakryiko.

15) Add an option to XDP selftests to use multi-buffer AF_XDP
    xdp_hw_metadata and mark used XDP programs as capable to use frags,
    from Larysa Zaremba.

16) Fix bpftool's BTF dumper wrt printing a pointer value and another
    one to fix struct_ops dump in an array, from Manu Bretelle.

* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (51 commits)
  netkit: Remove explicit active/peer ptr initialization
  selftests/bpf: Fix selftests broken by mitigations=off
  samples/bpf: Allow building with custom bpftool
  samples/bpf: Fix passing LDFLAGS to libbpf
  samples/bpf: Allow building with custom CFLAGS/LDFLAGS
  bpf: Add more WARN_ON_ONCE checks for mismatched alloc and free
  selftests/bpf: Add selftests for netkit
  selftests/bpf: Add netlink helper library
  bpftool: Extend net dump with netkit progs
  bpftool: Implement link show support for netkit
  libbpf: Add link-based API for netkit
  tools: Sync if_link uapi header
  netkit, bpf: Add bpf programmable net device
  bpf: Improve JEQ/JNE branch taken logic
  bpf: Fold smp_mb__before_atomic() into atomic_set_release()
  bpf: Fix unnecessary -EBUSY from htab_lock_bucket
  xsk: Avoid starving the xsk further down the list
  bpf: print full verifier states on infinite loop detection
  selftests/bpf: test if state loops are detected in a tricky case
  bpf: correct loop detection for iterators convergence
  ...
====================

Link: https://lore.kernel.org/r/20231026150509.2824-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26 20:02:41 -07:00
Chuyi Zhou
6da8830681 cgroup: Prepare for using css_task_iter_*() in BPF
This patch makes some preparations for using css_task_iter_*() in BPF
Program.

1. Flags CSS_TASK_ITER_* are #define-s and it's not easy for bpf prog to
use them. Convert them to enum so bpf prog can take them from vmlinux.h.

2. In the next patch we will add css_task_iter_*() in common kfuncs which
is not safe. Since css_task_iter_*() does spin_unlock_irq() which might
screw up irq flags depending on the context where bpf prog is running.
So we should use irqsave/irqrestore here and the switching is harmless.

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-2-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-10-19 17:02:46 -07:00
Nhat Pham
8cba9576df hugetlb: memcg: account hugetlb-backed memory in memory controller
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory.  This has been observed in our production system.

For instance, here is one of our usecases: suppose there are two 32G
containers.  The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it.  The rest is anon, cache, slab, etc.  We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness.  But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc.  fair.

What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max.  Similar procedure is done to other memory limits
(memory.low for e.g).  However, this is rather cumbersome and buggy. 
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.

This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller).  Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.

Some caveats to consider:
  * This feature is only available on cgroup v2.
  * There is no hugetlb pool management involved in the memory
    controller. As stated above, hugetlb folios are only charged towards
    the memory controller when it is used. Host overcommit management
    has to consider it when configuring hard limits.
  * Failure to charge towards the memcg results in SIGBUS. This could
    happen even if the hugetlb pool still has pages (but the cgroup
    limit is hit and reclaim attempt fails).
  * When this feature is enabled, hugetlb pages contribute to memory
    reclaim protection. low, min limits tuning must take into account
    hugetlb memory.
  * Hugetlb pages utilized while this option is not selected will not
    be tracked by the memory controller (even if cgroup v2 is remounted
    later on).

Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-10-18 14:34:17 -07:00
Kamalesh Babulal
27a6c5c50c cgroup: use legacy_name for cgroup v1 disable info
cgroup v1 or v2 or both controller names can be passed as arguments to
the 'cgroup_no_v1' kernel parameter, though most of the controller's
names are the same for both cgroup versions. This can be confusing when
both versions are used interchangeably, i.e., passing cgroup_no_v1=io

$ sudo dmesg |grep cgroup
...
cgroup: Disabling io control group subsystem in v1 mounts
cgroup: Disabled controller 'blkio'

Make it consistent across the pr_info()'s, by using ss->legacy_name, as
the subsystem name, while printing the cgroup v1 controller disabling
information in cgroup_init().

Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-10-09 06:46:56 -10:00
Michal Koutný
1ca0b60515 cgroup: Remove duplicates in cgroup v1 tasks file
One PID may appear multiple times in a preloaded pidlist.
(Possibly due to PID recycling but we have reports of the same
task_struct appearing with different PIDs, thus possibly involving
transfer of PID via de_thread().)

Because v1 seq_file iterator uses PIDs as position, it leads to
a message:
> seq_file: buggy .next function kernfs_seq_next did not update position index

Conservative and quick fix consists of removing duplicates from `tasks`
file (as opposed to removing pidlists altogether). It doesn't affect
correctness (it's sufficient to show a PID once), performance impact
would be hidden by unconditional sorting of the pidlist already in place
(asymptotically).

Link: https://lore.kernel.org/r/20230823174804.23632-1-mkoutny@suse.com/
Suggested-by: Firo Yang <firo.yang@suse.com>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2023-10-09 06:42:05 -10:00
Harshit Mogalapalli
783a8334ec cgroup/cpuset: Cleanup signedness issue in cpu_exclusive_check()
Smatch complains about returning negative error codes from a type
bool function.

kernel/cgroup/cpuset.c:705 cpu_exclusive_check() warn:
	signedness bug returning '(-22)'

The code works correctly, but it is confusing.  The current behavior is
that cpu_exclusive_check() returns true if it's *NOT* exclusive.  Rename
it to cpusets_are_exclusive() and reverse the returns so it returns true
if it is exclusive and false if it's not.  Update both callers as well.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309201706.2LhKdM6o-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-10-04 08:58:33 -10:00
Waiman Long
46c521bac5 cgroup/cpuset: Enable invalid to valid local partition transition
When a local partition becomes invalid, it won't transition back to
valid partition automatically if a proper "cpuset.cpus.exclusive" or
"cpuset.cpus" change is made. Instead, system administrators have to
explicitly echo "root" or "isolated" into the "cpuset.cpus.partition"
file at the partition root.

This patch now enables the automatic transition of an invalid local
partition back to valid when there is a proper "cpuset.cpus.exclusive"
or "cpuset.cpus" change.

Automatic transition of an invalid remote partition to a valid one,
however, is not covered by this patch. They still need an explicit
write to "cpuset.cpus.partition" to become valid again.

The test_cpuset_prs.sh test script is updated to add new test cases to
test this automatic state transition.

Reported-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/lkml/9777f0d2-2fdf-41cb-bd01-19c52939ef42@arm.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-10-04 08:54:40 -10:00
Luiz Capitulino
9b81d3a5be cgroup: add cgroup_favordynmods= command-line option
We have a need of using favordynmods with cgroup v1, which doesn't support
changing mount flags during remount. Enabling CONFIG_CGROUP_FAVOR_DYNMODS at
build-time is not an option because we want to be able to selectively
enable it for certain systems.

This commit addresses this by introducing the cgroup_favordynmods=
command-line option. This option works for both cgroup v1 and v2 and also
allows for disabling favorynmods when the kernel built with
CONFIG_CGROUP_FAVOR_DYNMODS=y.

Also, note that when cgroup_favordynmods=true favordynmods is never
disabled in cgroup_destroy_root().

Signed-off-by: Luiz Capitulino <luizcap@amazon.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-10-04 08:47:55 -10:00
Waiman Long
4a74e41888 cgroup/cpuset: Check partition conflict with housekeeping setup
A user can pre-configure certain CPUs in an isolated state at boot time
with the "isolcpus" kernel boot command line option. Those CPUs will
not be in the housekeeping_cpumask(HK_TYPE_DOMAIN) and so will not
be in any sched domains. This may conflict with the partition setup
at runtime. Those boot time isolated CPUs should only be used in an
isolated partition.

This patch adds the necessary check and disallows partition setup if the
check fails.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-09-18 10:32:31 -10:00
Waiman Long
181c8e091a cgroup/cpuset: Introduce remote partition
One can use "cpuset.cpus.partition" to create multiple scheduling domains
or to produce a set of isolated CPUs where load balancing is disabled.
The former use case is less common but the latter one can be frequently
used especially for the Telco use cases like DPDK.

The existing "isolated" partition can be used to produce isolated
CPUs if the applications have full control of a system. However, in a
containerized environment where all the apps are run in a container,
it is hard to distribute out isolated CPUs from the root down given
the unified hierarchy nature of cgroup v2.

The container running on isolated CPUs can be several layers down from
the root. The current partition feature requires that all the ancestors
of a leaf partition root must be parititon roots themselves. This can
be hard to configure.

This patch introduces a new type of partition called remote partition.
A remote partition is a partition whose parent is not a partition root
itself and its CPUs are acquired directly from available CPUs in the
top cpuset through a hierachical distribution of exclusive CPUs down
from it.

By contrast, the existing type of partitions where their parents have
to be valid partition roots are referred to as local partitions as they
have to be clustered around a parent partition root.

Child local partitons can be created under a remote partition, but
a remote partition cannot be created under a local partition. We may
relax this limitation in the future if there are use cases for such
configuration.

Manually writing to the "cpuset.cpus.exclusive" file is not necessary
when creating local partitions.  However, writing proper values to
"cpuset.cpus.exclusive" down the cgroup hierarchy before the target
remote partition root is mandatory for the creation of a remote
partition.

The value in "cpuset.cpus.exclusive.effective" may change if its
"cpuset.cpus" or its parent's "cpuset.cpus.exclusive.effective" changes.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-09-18 10:32:31 -10:00
Waiman Long
e2ffe502ba cgroup/cpuset: Add cpuset.cpus.exclusive for v2
This patch introduces a new writable "cpuset.cpus.exclusive" control
file for v2 which will be added to non-root cpuset enabled cgroups. This new
file enables user to set a smaller list of exclusive CPUs to be used in
the creation of a cpuset partition.

The value written to "cpuset.cpus.exclusive" may not be the effective
value being used for the creation of cpuset partition, the effective
value will show up in "cpuset.cpus.exclusive.effective" and it is
subject to the constraint that it must also be a subset of cpus_allowed
and parent's "cpuset.cpus.exclusive.effective".

By writing to "cpuset.cpus.exclusive", "cpuset.cpus.exclusive.effective"
may be set to a non-empty value even for cgroups that are not valid
partition roots yet.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-09-18 10:32:31 -10:00
Waiman Long
0c7f293efc cgroup/cpuset: Add cpuset.cpus.exclusive.effective for v2
The creation of a cpuset partition means dedicating a set of exclusive
CPUs to be used by a particular partition only. These exclusive CPUs
will not be used by any cpusets outside of that partition.

To enable more flexibility in creating partitions, we need a way to
distribute exclusive CPUs that can be used in new partitions. Currently,
we have a subparts_cpus cpumask in struct cpuset that tracks only
the exclusive CPUs used by all the sub-partitions underneath a given
cpuset.

This patch reworks the way we do exclusive CPUs tracking. The
subparts_cpus is now renamed to effective_xcpus which tracks the
exclusive CPUs allocated to a partition root including those that are
further distributed down to sub-partitions underneath it. IOW, it also
includes the exclusive CPUs used by the current partition root. Note
that effective_xcpus can contain offline CPUs and it will always be a
subset of cpus_allowed.

The renamed effective_xcpus is now exposed via a new read-only
"cpuset.cpus.exclusive.effective" control file. The new effective_xcpus
cpumask should be set to cpus_allowed when a cpuset becomes a partition
root and be cleared if it is not a valid partition root.

In the next patch, we will enable write to another new control file to
enable further control of what can get into effective_xcpus.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-09-18 10:32:31 -10:00
Waiman Long
6fcdb0183b cgroup/cpuset: Fix load balance state in update_partition_sd_lb()
Commit a86ce68078 ("cgroup/cpuset: Extract out CS_CPU_EXCLUSIVE
& CS_SCHED_LOAD_BALANCE handling") adds a new helper function
update_partition_sd_lb() to update the load balance state of the
cpuset. However the new load balance is determined by just looking at
whether the cpuset is a valid isolated partition root or not.  That is
not enough if the cpuset is not a valid partition root but its parent
is in the isolated state (load balance off). Update the function to
set the new state to be the same as its parent in this case like what
has been done in commit c8c926200c ("cgroup/cpuset: Inherit parent's
load balance state in v2").

Fixes: a86ce68078 ("cgroup/cpuset: Extract out CS_CPU_EXCLUSIVE & CS_SCHED_LOAD_BALANCE handling")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-09-18 10:32:30 -10:00
Kamalesh Babulal
d24f05987c cgroup: Avoid extra dereference in css_populate_dir()
Use css directly instead of dereferencing it from &cgroup->self, while
adding the cgroup v2 cft base and psi files in css_populate_dir(). Both
points to the same css, when css->ss is NULL, this avoids extra deferences
and makes code consistent in usage across the function.

Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-09-18 08:58:27 -10:00
Kamalesh Babulal
fd55c0adb4 cgroup: Check for ret during cgroup1_base_files cft addition
There is no check for possible failure while populating
cgroup1_base_files cft in css_populate_dir(), like its cgroup v2 counter
parts cgroup_{base,psi}_files.  In case of failure, the cgroup might not
be set up right.  Add ret value check to return on failure.

Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-09-18 08:57:22 -10:00
Linus Torvalds
76be05d4fd cgroup: fix build when CGROUP_SCHED is not enabled
Sudip Mukherjee reports that the mips sb1250_swarm_defconfig build fails
with the current kernel.  It isn't actually MIPS-specific, it's just
that that defconfig does not have CGROUP_SCHED enabled like most configs
do, and as such shows this error:

  kernel/cgroup/cgroup.c: In function 'cgroup_local_stat_show':
  kernel/cgroup/cgroup.c:3699:15: error: implicit declaration of function 'cgroup_tryget_css'; did you mean 'cgroup_tryget'? [-Werror=implicit-function-declaration]
   3699 |         css = cgroup_tryget_css(cgrp, ss);
        |               ^~~~~~~~~~~~~~~~~
        |               cgroup_tryget
  kernel/cgroup/cgroup.c:3699:13: warning: assignment to 'struct cgroup_subsys_state *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
   3699 |         css = cgroup_tryget_css(cgrp, ss);
        |             ^

because cgroup_tryget_css() only exists when CGROUP_SCHED is enabled,
and the cgroup_local_stat_show() function should similarly be guarded by
that config option.

Move things around a bit to fix this all.

Fixes: d1d4ff5d11 ("cgroup: put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED")
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-09-02 08:27:17 -07:00
Linus Torvalds
7716f383a5 cgroup: Changes for v6.6
* Per-cpu cpu usage stats are now tracked. This currently isn't printed out
   in the cgroupfs interface and can only be accessed through e.g. BPF.
   Should decide on a not-too-ugly way to show per-cpu stats in cgroupfs.
 
 * cpuset received some cleanups and prepatory patches for the pending
   cpus.exclusive patchset which will allow cpuset partitions to be created
   below non-partition parents, which should ease the management of partition
   cpusets.
 
 * A lot of code and documentation cleanup patches.
 
 * tools/testing/selftests/cgroup/test_cpuset.c is added. This causes trivial
   conflicts in .gitignore and Makefile under the directory against
   fe3b1bf19b ("selftests: cgroup: add test_zswap program"). They can be
   resolved by keeping lines from both branches.
 -----BEGIN PGP SIGNATURE-----
 
 iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZPENTg4cdGpAa2VybmVs
 Lm9yZwAKCRCxYfJx3gVYGcyBAP44cHwpSFxXe3cehxAzb1l/2BZXtzU5l48OqUQd
 MwHyrwEAm7+MTVAR2xOF4f+oVM9KWmKj7oV7Clpixl1S7hHyjwE=
 =FCc9
 -----END PGP SIGNATURE-----

Merge tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

Pull cgroup updates from Tejun Heo:

 - Per-cpu cpu usage stats are now tracked

   This currently isn't printed out in the cgroupfs interface and can
   only be accessed through e.g. BPF. Should decide on a not-too-ugly
   way to show per-cpu stats in cgroupfs

 - cpuset received some cleanups and prepatory patches for the pending
   cpus.exclusive patchset which will allow cpuset partitions to be
   created below non-partition parents, which should ease the management
   of partition cpusets

 - A lot of code and documentation cleanup patches

 - tools/testing/selftests/cgroup/test_cpuset.c added

* tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (32 commits)
  cgroup: Avoid -Wstringop-overflow warnings
  cgroup:namespace: Remove unused cgroup_namespaces_init()
  cgroup/rstat: Record the cumulative per-cpu time of cgroup and its descendants
  cgroup: clean up if condition in cgroup_pidlist_start()
  cgroup: fix obsolete function name in cgroup_destroy_locked()
  Documentation: cgroup-v2.rst: Correct number of stats entries
  cgroup: fix obsolete function name above css_free_rwork_fn()
  cgroup/cpuset: fix kernel-doc
  cgroup: clean up printk()
  cgroup: fix obsolete comment above cgroup_create()
  docs: cgroup-v1: fix typo
  docs: cgroup-v1: correct the term of Page Cache organization in inode
  cgroup/misc: Store atomic64_t reads to u64
  cgroup/misc: Change counters to be explicit 64bit types
  cgroup/misc: update struct members descriptions
  cgroup: remove cgrp->kn check in css_populate_dir()
  cgroup: fix obsolete function name
  cgroup: use cached local variable parent in for loop
  cgroup: remove obsolete comment above struct cgroupstats
  cgroup: put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED
  ...
2023-09-01 15:58:21 -07:00
Gustavo A. R. Silva
78d44b824e cgroup: Avoid -Wstringop-overflow warnings
Change the notation from pointer-to-array to pointer-to-pointer.
With this, we avoid the compiler complaining about trying
to access a region of size zero as an argument during function
calls.

This is a workaround to prevent the compiler complaining about
accessing an array of size zero when evaluating the arguments
of a couple of function calls. See below:

kernel/cgroup/cgroup.c: In function 'find_css_set':
kernel/cgroup/cgroup.c:1206:16: warning: 'find_existing_css_set' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
 1206 |         cset = find_existing_css_set(old_cset, cgrp, template);
      |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/cgroup/cgroup.c:1206:16: note: referencing argument 3 of type 'struct cgroup_subsys_state *[0]'
kernel/cgroup/cgroup.c:1071:24: note: in a call to function 'find_existing_css_set'
 1071 | static struct css_set *find_existing_css_set(struct css_set *old_cset,
      |                        ^~~~~~~~~~~~~~~~~~~~~

With the change to pointer-to-pointer, the functions are not prevented
from being executed, and they will do what they have to do when
CGROUP_SUBSYS_COUNT == 0.

Address the following -Wstringop-overflow warnings seen when
built with ARM architecture and aspeed_g4_defconfig configuration
(notice that under this configuration CGROUP_SUBSYS_COUNT == 0):

kernel/cgroup/cgroup.c:1208:16: warning: 'find_existing_css_set' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:1258:15: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:6089:18: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:6153:18: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]

This results in no differences in binary output.

Link: https://github.com/KSPP/linux/issues/316
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-08-17 11:55:05 -10:00
Lu Jialin
82b90b6c5b cgroup:namespace: Remove unused cgroup_namespaces_init()
cgroup_namspace_init() just return 0. Therefore, there is no need to
call it during start_kernel. Just remove it.

Fixes: a79a908fd2 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-08-14 14:29:47 -10:00
Hao Jia
0437719c1a cgroup/rstat: Record the cumulative per-cpu time of cgroup and its descendants
The member variable bstat of the structure cgroup_rstat_cpu
records the per-cpu time of the cgroup itself, but does not
include the per-cpu time of its descendants. The per-cpu time
including descendants is very useful for calculating the
per-cpu usage of cgroups.

Although we can indirectly obtain the total per-cpu time
of the cgroup and its descendants by accumulating the per-cpu
bstat of each descendant of the cgroup. But after a child cgroup
is removed, we will lose its bstat information. This will cause
the cumulative value to be non-monotonic, thus affecting
the accuracy of cgroup per-cpu usage.

So we add the subtree_bstat variable to record the total
per-cpu time of this cgroup and its descendants, which is
similar to "cpuacct.usage*" in cgroup v1. And this is
also helpful for the migration from cgroup v1 to cgroup v2.
After adding this variable, we can obtain the per-cpu time of
cgroup and its descendants in user mode through eBPF/drgn, etc.
And we are still trying to determine how to expose it in the
cgroupfs interface.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-08-07 08:41:25 -10:00