- New board support of LS1043a-QDS from Freescale/NXP
- Add new compatible for LS1043A and LS2080A GPIO devices
- Update device tree bindings and sources for LS2080A fsl-mc device
- Update QSPI and DSPI support on LS1043A and LS2080A
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXKL1RAAoJEFBXWFqHsHzOdO8H/1HeVve6KqhjpgHEYI0vqCQN
F8dC3kA8S9UZcozl58VrKvH+ArR2dcumfdl6ov/WVdfuWDwcBN3SKYgCK4xV1aN9
QtxFkc7uiE4InyDl4w9Q3fGRZfCgzk3eYUWQmHw6D0oQc3UhoIZ3cK+aKMB2nlZ1
Q4e0pO3Ell96sKYIhaG6rltlLc9U6Ax4z1XDl1CZ/T2njARFqwBfgNkjSdguB0Ks
+GOCd/TyloncdWoC41MQnwaOWc+msa3rkXJG2Aj1PWyocZPIiY0K68RClv1g/yKk
XZJ3M574QK+n/+Em0t+QaxrggiqT6kzr00CfULyyXQ4xhZO1siByCuxdEFW/tAs=
=pZW5
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Merge "The Freescale/NXP arm64 device tree updates for 4.7" from Shawn Guo:
- New board support of LS1043a-QDS from Freescale/NXP
- Add new compatible for LS1043A and LS2080A GPIO devices
- Update device tree bindings and sources for LS2080A fsl-mc device
- Update QSPI and DSPI support on LS1043A and LS2080A
* tag 'imx-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls2080a: fsl-mc dt node updates
Documentation: fsl-mc: binding updates for MSIs, ranges, PHYs
arm64: dts: ls1043a: add the DTS node for QSPI support
Documentation: fsl-quadspi: Add fsl,ls1043a-qspi compatible string
arm64: dts: ls2080a: Add compatible "fsl,ls2080a-gpio" for ls2080a gpio nodes
arm64: dts: ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes
arm64: dts: ls2080a: update the DTS for QSPI and DSPI support
Documentation: fsl: dspi: Add fsl,ls2080a-dspi compatible string
arm64: dts: ls1043a-rdb: add the DTS for DSPI support
arm64: dts: add LS1043a-QDS board support
Documentation: DT: Add entry for Freescale LS1043a-QDS board
Complement the GM20B GPU device tree node on Tegra210 with missing
properties to make it usable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=yX4c
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-gm20b' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
Merge "arm64: tegra: Enable GM20B GPU on Tegra210" from Thierry Reding:
Complement the GM20B GPU device tree node on Tegra210 with missing
properties to make it usable.
* tag 'tegra-for-4.7-gm20b' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add IOMMU node to GM20B on Tegra210
arm64: tegra: Add reference clock to GM20B on Tegra210
dt-bindings: Add documentation for GM20B GPU
dt-bindings: gk20a: Document iommus property
dt-bindings: gk20a: Fix typo in compatible name
Adds device tree bindings for the GPIO and AON controllers found on the
Tegra186 SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=6MhO
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
Merge "dt-bindings: gpio: tegra: Add Tegra186 support" from Thierry Reding:
Adds device tree bindings for the GPIO and AON controllers found on the
Tegra186 SoC.
* tag 'tegra-for-4.7-gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add DT binding for Tegra186 GPIO controllers
ARM: tegra: Fix naming in GPIO DT binding header
- switch to label in the mvebu arm64 device tree
- use new clock binding on Armada 7K/8K
- improve SPI and I2C description on Armada 7K/8k
- add CP110 block adding PCIe, SATA and USB3
- add XOR support on Armada 3700
- few more little fix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlcjbaAACgkQCwYYjhRyO9VaVgCghxZq/0qnD5+k5ouUvSYwXiOo
EV8AoIL6w3bn64kY93M0o8RtrG4WLe+h
=Pilg
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.7-1' of git://git.infradead.org/linux-mvebu into next/dt64
Merge "mvebu dt64 for 4.7" from Gregory CLEMENT:
- switch to label in the mvebu arm64 device tree
- use new clock binding on Armada 7K/8K
- improve SPI and I2C description on Armada 7K/8k
- add CP110 block adding PCIe, SATA and USB3
- add XOR support on Armada 3700
- few more little fix
* tag 'mvebu-dt64-4.7-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add XOR node for Armada 3700 SoC
arm64: dts: marvell: Use a SoC-specific compatible for xHCI on Armada37xx
arm64: dts: marvell: Rename armada-37xx USB node
arm64: dts: marvell: Clean up armada-3720-db
arm64: dts: marvell: enable several CP interfaces on Armada 7040-DB
arm64: dts: marvell: initial DT description of Armada 7K/8K CP110 master
arm64: dts: marvell: use the proper I2C controller compatible string for 7K/8K
arm64: dts: marvell: improve SPI flash description on Armada 7040-DB
arm64: dts: marvell: use new clock binding on Armada AP806
arm64: dts: marvell: add UART aliases and define stdout-path
arm64: dts: marvell: rename armada-ap806 XOR nodes
arm64: dts: marvell: clean up armada-7040-db
dts for the evaluation board of this chip and similar to the arm32
side also move the rk3368 thermal data into the core soc dtsi, as
there really is no need to keep it separate.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXIoubAAoJEPOmecmc0R2B/kQH/1gcN5C5JM4kkohUyEJ2uBju
zIwbfw4TyV/ndMUb1rCj8XUTBvbz80PvNKmsYJXERr8fUtjRaA71Wf8iJsqyaqDz
NQ3ygC30ZtmG2Z39ekn4cZ7zqjxwrEmY53vFfR4oDd1ENNVh14g26qxLfYDG7SXD
RGB729icDa2wr9W0doNc9khcQDFY3j4pbz+v8tfDoVcbFZWeq5K4SnbvB0VVQBCA
sS0EJV0KUUSlZ5okJuoZUx5UeeodJaV8uvygOboL644kI8hNnnp4rCP23paZ/d0H
ot5IcrXDjpCHCEQdQpr3OsCnCgzeK0NL5F1ppJr2MYfjQJSWEaGFQatV2Ipquss=
=25Hx
-----END PGP SIGNATURE-----
Merge tag 'v4.7-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Merge "Rockchip dts64 updates for v4.7 - part2" from Heiko Stübner:
Adding the new rk3399 core devicetree support as well as a board
dts for the evaluation board of this chip and similar to the arm32
side also move the rk3368 thermal data into the core soc dtsi, as
there really is no need to keep it separate.
* tag 'v4.7-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: document rockchip rk3399-evb board
arm64: dts: rockchip: add dts file for RK3399 evaluation board
arm64: dts: rockchip: add core dtsi file for RK3399 SoCs
dt-bindings: rockchip-dw-mshc: add description for rk3399
clk: rockchip: export some necessary rk3399 clock ids
clk: rockchip: rename rga clock-id on rk3399
clk: rockchip: add general gpu soft-reset on rk3399
arm64: dts: rockchip: move the rk3368 thermal data into rk3368.dtsi
clk: rockchip: fix checkpatch errors in rk3399 dt-binding header
clk: rockchip: add dt-binding header for rk3399
This merges fixes from linux-4.6 into the next/dt64 tree to avoid
a later merge conflict.
* renesas/fixes-2:
arm64: dts: r8a7795: Don't disable referenced optional scif clock
ARM: shmobile: timer: Fix preset_lpj leading to too short delays
Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins"
ARM: dts: r8a7791: Don't disable referenced optional clocks
Armada 3700 SoC comprise one dual-channel XOR engine and this
patch adds its according representation.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch adds core dtsi file for Rockchip RK3399 SoCs.
The RK3399 has big/little architecture, which needs a separate
node for the PMU of each microarchitecture, for now it missing
the pmu node since the old one could not work well.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Fix its node without msi-cells for hip05
- Add nor flash node for hip05 D02 board
- Add initial dts for hip06 D03 board
- Reorder and add the hip06 D03 binding in the binding document
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OZ3Q
-----END PGP SIGNATURE-----
Merge tag 'hip0x-dt-for-4.7' of git://github.com/hisilicon/linux-hisi into next/dt64
Merge "ARM64: DT: Hisilicon hip05 and hip06 updates for 4.7" Wei Xu:
- Fix its node without msi-cells for hip05
- Add nor flash node for hip05 D02 board
- Add initial dts for hip06 D03 board
- Reorder and add the hip06 D03 binding in the binding document
* tag 'hip0x-dt-for-4.7' of git://github.com/hisilicon/linux-hisi:
Documentation: arm64: Add Hisilicon Hip06 D03 dts binding
arm64: dts: Add initial dts for Hisilicon Hip06 D03 board
arm64: dts: hip05: Add nor flash support
arm64: dts: hip05: fix its node without msi-cells
Even if the Armada 37xx does not any specific setup, the device tree
binding documentation requires to use a SoC-specific version
corresponding to the platform first followed by the generic version.
This patch introduce this new compatible string and updates the
documentation accordingly.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
No need to reflect the USB version in the node name.
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
[gregory.clement@free-electrons.com: drop Fixes tag as it is not a bug fix.]
Instead of duplicating the SoC's node hierarchy, including a bus node
named "internal-regs", reference the actually desired nodes by label,
like Berlin already does. Add labels where necessary.
Drop an inconsistent white line while at it.
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
[gregory.clement@free-electrons.com: drop Fixes tag as it is not a bug fix.]
This patch adds documentation for the devicetree bindings used by
the DT files of Hisilicon Hip06 D03 board.
Meanwhile, reorder the soc/board name alphabetically.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The Hip06 soc has same cpu topology compared with Hip05, four clusters
and each cluster has quard Cortex-A57, but with different IO part,
like HNS, SAS and PCI, they are all upgraded. There are also not same
in ITS, MBIGEN and SMMU, etc.
This patch adds the initial dts for hip06 d03 board.
Note, there is no serial, because the soc use LPC uart, the serial node
is not needed.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch is to add support nor-flash. Notice, the pre-defined
partitions may not be used.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Fix commit abf9c25d55 ("arm64: dts: hip05: Append all gicv3 ITS
entries"), it forgets the property msi-cell, see arm,gic-v3.txt.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can
cause drivers to be deferred forever if such clocks are referenced in
their devices' clocks properties.
Update the various disabled external clock nodes to default to a
frequency of 0, but don't disable them, to prevent this.
Reported-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
It can be used for the watchdog.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The operating system driver can take advantage of the IOMMU to remove
the need for physically contiguous memory buffers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This clock is required for the GPU to operate.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
GM20B's definition is mostly similar to GK20A's, but requires an
additional clock.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
GK20A can optionally make use of an IOMMU.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The correct compatible name is "nvidia,gk20a".
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This commit enables several interfaces of the CP side of the Armada
7040 for the Armada 7040 DB board:
- one PCIe interface
- one SPI controller with an attached SPI flash
- one I2C controller
- one SATA controller
- two USB3 controllers
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit adds an initial Device Tree description for the CP110
master that is found in the Armada 7K and 8K SoCs. This initial
description describes:
- the system controller (to provide clocks)
- three PCIe interfaces
- the SATA interface
- the I2C controllers
- the SPI controllers
For the record, the organization of the SoCs is as follows:
- 7020: dual-core AP, one CP110 (master)
- 7040: quad-core AP, one CP110 (master)
- 8020: dual-core AP, two CP110s (master and slave)
- 8040: quad-core AP, two CP110s (master and slave)
For this reason, all of the 7020, 7040, 8020 and 8040 include
armada-cp110-master.dtsi. When support for the second CP110 (slave)
used in 8020 and 8040 will be added, the .dtsi files for those SoCs
will in addition include armada-cp110-slave.dtsi.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The I2C controller found in the Marvell Armada 7K/8K provides the
bridge/offloading features, so the Device Tree should use the
marvell,mv78230-i2c compatible string instead of marvell,mv64xxx-i2c.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit slightly improves the description of the SPI flash
connected to the SPI controller of the Armada 7040, by:
- Using the more generic "jedec,spi-nor" compatible string, which
lets the driver auto-detect the exact SPI flash type.
- Removing the silly comment about the Chip Select, since reg = <0>
is explicit enough.
- Switching to the new Device Tree binding to describe flash
partitions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit updates the Marvell AP806 Device Tree description to make
use of the accepted clock Device Tree binding.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit adds the necessary UART aliases to the main Armada 7K/8K
.dtsi file, and uses them to define the /chosen/stdout-path property
on the Armada 7040 DB board.
Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Node names should not contain an instance number, the unit address
serves to distinguish nodes of the same name. So rename the XOR nodes
to just xor@<address>.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[Thomas:
- remove labels, they are really not needed for XOR engines.
- remove the Fixes: tag, as this is not a fix.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Instead of duplicating the node hierarchy, reference the nodes by label,
adding labels where necessary.
Drop some trailing or inconsistent white lines while at it.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[Thomas: drop Fixes tag as it is not a bug fix.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
updates to the fsl-mc node for full functionality:
-msi-parent is needed for interrupt support
-ranges is needed to enable the bus driver to translate bus addresses
-dpmac nodes provide a basis for relating dpmac objects to PHYs
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-The Freescale Management Complex and all associated objects
use message interrupts, and thus an msi-parent is required.
-Define a ranges property to specify the mapping between
the MC address space and the system address space.
-The fsl-mc node may optionally have dpmac sub-nodes that describe
the relationship between the Ethernet MACs which belong to the MC
and the Ethernet PHYs on the system board.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: J. German Rivera <German.Rivera@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
clk_get() on a disabled clock node will return -EPROBE_DEFER, which can
cause drivers to be deferred forever if such clocks are referenced in
their devices' clocks properties.
Update the disabled external scif clock node so that it
is not disabled to prevent this.
Reported-by: Jürg Billeter <j@bitron.ch>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: fix for v4.6 extracted from a larger patch targeted at v4.7]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Include the development base board, which is equipped with some
devices such as EEPROM.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330
DMA, GIC maintenance interrupt, PL022 SPI controller
- Anup also re-orgnanizes the clock Device Tree fragments into a separate file
for consistency with how other Broadcom SoCs are doing this
- Luke switches the SMP enable-method and reboot from a spin-table + syscon to
the standard PSCI 1.0 firmware interface
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6mn8
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.7/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64
Pull "Broadcom ARM64-based SoC Device Tree changes" from Florian Fainelli:
- Anup enables a bunch of standard peripherals in the Northstar 2 DTS: PL330
DMA, GIC maintenance interrupt, PL022 SPI controller
- Anup also re-orgnanizes the clock Device Tree fragments into a separate file
for consistency with how other Broadcom SoCs are doing this
- Luke switches the SMP enable-method and reboot from a spin-table + syscon to
the standard PSCI 1.0 firmware interface
* tag 'arm-soc/for-4.7/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: NS2 secondary core enablement via PSCI
arm64: dts: Add ARM PL022 SPI DT nodes for NS2
arm64: dts: Move NS2 clock DT nodes to separate DT file
arm64: dts: Add maintenance interrupt for GIC in NS2 DT
arm64: dts: Add ARM PL330 DMA DT node for NS2
This patch set only includes a single change to
fix the compatible string for SATA controllers on
X-Gene v2 SOC platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Wnq5
-----END PGP SIGNATURE-----
Merge tag 'xgene-dts-for-v4.7-part1' of https://github.com/AppliedMicro/xgene-next into next/dt64
Merge "First part of X-Gene DTS changes queued for v4.7" from Duc Dang:
This patch set only includes a single change to
fix the compatible string for SATA controllers on
X-Gene v2 SOC platforms.
* tag 'xgene-dts-for-v4.7-part1' of https://github.com/AppliedMicro/xgene-next:
arm64: dts: apm: Fix compatible string for X-Gene 2 SATA controller DTS node
- Reserve memory regions for Hi6220
- Add sp804 timer node for Hi6220
- Add cpu and cluster level's low power state for Hi6220
- Add gpio configuration nodes for Hi6220
- Add pinctrl configuration nodes for Hi6220
- Add spi related nodes for Hi6220
- Add i2c nodes for Hi6220
- Add i2c nodes to work with mezzanine boards
- Add usb nodes for Hi6220
- Add mailobx node for Hi6220
- Add SRAM node and stub clock node for Hi6220
- Add pinctrl nodes for uarts and enable them
- Add LED nodes for hi6220-hikey board
- Add hi655x pmic node for Hi6220
- Add dwmmc nodes for Hi6220
- Add wifi nodes support for Hi6220-Hikey board
- Register thermal sensor for Hi6220
- Register Hi6220's thermal zone for power allocator
- Add L2 cache topology for Hi6220
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MpZ0
-----END PGP SIGNATURE-----
Merge tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi into next/dt64
Pull "ARM64: DT: Hisilicon Hi6220 soc and hikey board updates for 4.7" from Wei Xu
- Reserve memory regions for Hi6220
- Add sp804 timer node for Hi6220
- Add cpu and cluster level's low power state for Hi6220
- Add gpio configuration nodes for Hi6220
- Add pinctrl configuration nodes for Hi6220
- Add spi related nodes for Hi6220
- Add i2c nodes for Hi6220
- Add i2c nodes to work with mezzanine boards
- Add usb nodes for Hi6220
- Add mailobx node for Hi6220
- Add SRAM node and stub clock node for Hi6220
- Add pinctrl nodes for uarts and enable them
- Add LED nodes for hi6220-hikey board
- Add hi655x pmic node for Hi6220
- Add dwmmc nodes for Hi6220
- Add wifi nodes support for Hi6220-Hikey board
- Register thermal sensor for Hi6220
- Register Hi6220's thermal zone for power allocator
- Add L2 cache topology for Hi6220
* tag 'hi6220-dt-for-4.7' of git://github.com/hisilicon/linux-hisi:
arm64: dts: Add L2 cache topology to Hi6220
arm64: dts: register Hi6220's thermal zone for power allocator
arm64: dts: register Hi6220's thermal sensor
arm64: dts: add wifi nodes support for hi6220-hikey
arm64: dts: add dwmmc nodes for hi6220
arm64: dts: hikey: Add hi655x pmic dts node
arm64: dts: add LED nodes for hi6220-hikey
arm64: dts: hi6220: add pinctrl for uarts and enable them
arm64: dts: add Hi6220's stub clock node
arm64: dts: add mailbox node for Hi6220
arm64: dts: Add hi6220 usb node
arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards
arm64: dts: add all hi6220 i2c nodes
arm64: dts: add Hi6220 spi configuration nodes
arm64: dts: add Hi6220 pinctrl configuration nodes
arm64: dts: Add Hi6220 gpio configuration nodes
arm64: dts: enable idle states for Hi6220
arm64: dts: add sp804 timer node for Hi6220
arm64: dts: Reserve memory regions for hi6220
Just one update: Support for external expansion bus useful for
additional hardware e.g.LogicTile Express daughterboards (Brian Starkey)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ypy7
-----END PGP SIGNATURE-----
Merge tag 'juno-for-v4.7/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
Pull "ARMv8 Juno DT updates for v4.7" from Sudeep Holla:
Just one update: Support for external expansion bus useful for
additional hardware e.g.LogicTile Express daughterboards (Brian Starkey)
* tag 'juno-for-v4.7/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Add external expansion bus to DT
A couple of cleanups and fixes to various device trees, enable power and
volume keys on Jetson TX1, use stdout-path to define the serial port (so
it doesn't have to be specified on the kernel command-line) and add
Google Pixel C (a.k.a. Smaug) support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=2hlL
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.7-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
Merge "arm64: tegra: Changes for v4.7-rc1" from Thierry Reding
A couple of cleanups and fixes to various device trees, enable power and
volume keys on Jetson TX1, use stdout-path to define the serial port (so
it doesn't have to be specified on the kernel command-line) and add
Google Pixel C (a.k.a. Smaug) support.
* tag 'tegra-for-4.7-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Enable cros-ec and charger on Smaug
arm64: tegra: Add pinmux for Smaug board
arm64: tegra: Add stdout-path for various boards
arm64: tegra: Remove unused #power-domain-cells property
arm64: tegra: Add gpio-keys nodes for Smaug
arm64: tegra: Enable power and volume keys on Jetson TX1
arm64: tegra: Add support for Google Pixel C
arm64: tegra: Replace legacy *,wakeup property with wakeup-source
arm64: tegra: Fix copy/paste typo in several DTS includes
arm64: tegra: Remove 0, prefix from unit-addresses
1. Add PL330 DMA controller and Thermal Management Unit to Exynos 7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lzL+
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Merge "Samsung Device Tree ARM64 updates and improvements for v4.7" from Krzysztof Kozlowski:
1. Add PL330 DMA controller and Thermal Management Unit to Exynos 7.
* tag 'samsung-dt64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: Add nodes for pdma0 and pdma1 for exynos7
arm64: dts: exynos: Add TMU node for exynos7
