select_fallback_rq() only needs to recheck for an allowed CPU if the
affinity mask of the task has changed since the last check.
Return a 'bool' from cpuset_cpus_allowed_fallback() to indicate whether
the affinity mask was updated, and use this to elide the allowed check
when the mask has been left alone.
No functional change.
Suggested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20210730112443.23245-5-will@kernel.org
Asymmetric systems may not offer the same level of userspace ISA support
across all CPUs, meaning that some applications cannot be executed by
some CPUs. As a concrete example, upcoming arm64 big.LITTLE designs do
not feature support for 32-bit applications on both clusters.
Modify guarantee_online_cpus() to take task_cpu_possible_mask() into
account when trying to find a suitable set of online CPUs for a given
task. This will avoid passing an invalid mask to set_cpus_allowed_ptr()
during ->attach() and will subsequently allow the cpuset hierarchy to be
taken into account when forcefully overriding the affinity mask for a
task which requires migration to a compatible CPU.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Link: https://lkml.kernel.org/r/20210730112443.23245-4-will@kernel.org
If the scheduler cannot find an allowed CPU for a task,
cpuset_cpus_allowed_fallback() will widen the affinity to cpu_possible_mask
if cgroup v1 is in use.
In preparation for allowing architectures to provide their own fallback
mask, just return early if we're either using cgroup v1 or we're using
cgroup v2 with a mask that contains invalid CPUs. This will allow
select_fallback_rq() to figure out the mask by itself.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Link: https://lkml.kernel.org/r/20210730112443.23245-3-will@kernel.org
Asymmetric systems may not offer the same level of userspace ISA support
across all CPUs, meaning that some applications cannot be executed by
some CPUs. As a concrete example, upcoming arm64 big.LITTLE designs do
not feature support for 32-bit applications on both clusters.
On such a system, we must take care not to migrate a task to an
unsupported CPU when forcefully moving tasks in select_fallback_rq()
in response to a CPU hot-unplug operation.
Introduce a task_cpu_possible_mask() hook which, given a task argument,
allows an architecture to return a cpumask of CPUs that are capable of
executing that task. The default implementation returns the
cpu_possible_mask, since sane machines do not suffer from per-cpu ISA
limitations that affect scheduling. The new mask is used when selecting
the fallback runqueue as a last resort before forcing a migration to the
first active CPU.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20210730112443.23245-2-will@kernel.org
This extends SCHED_IDLE to cgroups.
Interface: cgroup/cpu.idle.
0: default behavior
1: SCHED_IDLE
Extending SCHED_IDLE to cgroups means that we incorporate the existing
aspects of SCHED_IDLE; a SCHED_IDLE cgroup will count all of its
descendant threads towards the idle_h_nr_running count of all of its
ancestor cgroups. Thus, sched_idle_rq() will work properly.
Additionally, SCHED_IDLE cgroups are configured with minimum weight.
There are two key differences between the per-task and per-cgroup
SCHED_IDLE interface:
- The cgroup interface allows tasks within a SCHED_IDLE hierarchy to
maintain their relative weights. The entity that is "idle" is the
cgroup, not the tasks themselves.
- Since the idle entity is the cgroup, our SCHED_IDLE wakeup preemption
decision is not made by comparing the current task with the woken
task, but rather by comparing their matching sched_entity.
A typical use-case for this is a user that creates an idle and a
non-idle subtree. The non-idle subtree will dominate competition vs
the idle subtree, but the idle subtree will still be high priority vs
other users on the system. The latter is accomplished via comparing
matching sched_entity in the waken preemption path (this could also be
improved by making the sched_idle_rq() decision dependent on the
perspective of a specific task).
For now, we maintain the existing SCHED_IDLE semantics. Future patches
may make improvements that extend how we treat SCHED_IDLE entities.
The per-task_group idle field is an integer that currently only holds
either a 0 or a 1. This is explicitly typed as an integer to allow for
further extensions to this API. For example, a negative value may
indicate a highly latency-sensitive cgroup that should be preferred
for preemption/placement/etc.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210730020019.1487127-2-joshdon@google.com
The scheduler currently expects NUMA node distances to be stable from
init onwards, and as a consequence builds the related data structures
once-and-for-all at init (see sched_init_numa()).
Unfortunately, on some architectures node distance is unreliable for
offline nodes and may very well change upon onlining.
Skip over offline nodes during sched_init_numa(). Track nodes that have
been onlined at least once, and trigger a build of a node's NUMA masks
when it is first onlined post-init.
Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210818074333.48645-1-srikar@linux.vnet.ibm.com
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210803141621.780504-33-bigeasy@linutronix.de
SCHED_FLAG_KEEP_PARAMS can be passed to sched_setattr to specify that
the call must not touch scheduling parameters (nice or priority). This
is particularly handy for uclamp when used in conjunction with
SCHED_FLAG_KEEP_POLICY as that allows to issue a syscall that only
impacts uclamp values.
However, sched_setattr always checks whether the priorities and nice
values passed in sched_attr are valid first, even if those never get
used down the line. This is useless at best since userspace can
trivially bypass this check to set the uclamp values by specifying low
priorities. However, it is cumbersome to do so as there is no single
expression of this that skips both RT and CFS checks at once. As such,
userspace needs to query the task policy first with e.g. sched_getattr
and then set sched_attr.sched_priority accordingly. This is racy and
slower than a single call.
As the priority and nice checks are useless when SCHED_FLAG_KEEP_PARAMS
is specified, simply inherit them in this case to match the policy
inheritance of SCHED_FLAG_KEEP_POLICY.
Reported-by: Wei Wang <wvw@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Link: https://lore.kernel.org/r/20210805102154.590709-3-qperret@google.com
The UCLAMP_FLAG_IDLE flag is set on a runqueue when dequeueing the last
uclamp active task (that is, when buckets.tasks reaches 0 for all
buckets) to maintain the last uclamp.max and prevent blocked util from
suddenly becoming visible.
However, there is an asymmetry in how the flag is set and cleared which
can lead to having the flag set whilst there are active tasks on the rq.
Specifically, the flag is cleared in the uclamp_rq_inc() path, which is
called at enqueue time, but set in uclamp_rq_dec_id() which is called
both when dequeueing a task _and_ in the update_uclamp_active() path. As
a result, when both uclamp_rq_{dec,ind}_id() are called from
update_uclamp_active(), the flag ends up being set but not cleared,
hence leaving the runqueue in a broken state.
Fix this by clearing the flag in update_uclamp_active() as well.
Fixes: e496187da7 ("sched/uclamp: Enforce last task's UCLAMP_MAX")
Reported-by: Rick Yiu <rickyiu@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20210805102154.590709-2-qperret@google.com
A missing clock update is causing the following warning:
rq->clock_update_flags < RQCF_ACT_SKIP
WARNING: CPU: 112 PID: 2041 at kernel/sched/sched.h:1453
sub_running_bw.isra.0+0x190/0x1a0
...
CPU: 112 PID: 2041 Comm: sugov:112 Tainted: G W 5.14.0-rc1 #1
Hardware name: WIWYNN Mt.Jade Server System
B81.030Z1.0007/Mt.Jade Motherboard, BIOS 1.6.20210526 (SCP:
1.06.20210526) 2021/05/26
...
Call trace:
sub_running_bw.isra.0+0x190/0x1a0
migrate_task_rq_dl+0xf8/0x1e0
set_task_cpu+0xa8/0x1f0
try_to_wake_up+0x150/0x3d4
wake_up_q+0x64/0xc0
__up_write+0xd0/0x1c0
up_write+0x4c/0x2b0
cppc_set_perf+0x120/0x2d0
cppc_cpufreq_set_target+0xe0/0x1a4 [cppc_cpufreq]
__cpufreq_driver_target+0x74/0x140
sugov_work+0x64/0x80
kthread_worker_fn+0xe0/0x230
kthread+0x138/0x140
ret_from_fork+0x10/0x18
The task causing this is the `cppc_fie` DL task introduced by
commit 1eb5dde674 ("cpufreq: CPPC: Add support for frequency
invariance").
With CONFIG_ACPI_CPPC_CPUFREQ_FIE=y and schedutil cpufreq governor on
slow-switching system (like on this Ampere Altra WIWYNN Mt. Jade Arm
Server):
DL task `curr=sugov:112` lets `p=cppc_fie` migrate and since the latter
is in `non_contending` state, migrate_task_rq_dl() calls
sub_running_bw()->__sub_running_bw()->cpufreq_update_util()->
rq_clock()->assert_clock_updated()
on p.
Fix this by updating the clock for a non_contending task in
migrate_task_rq_dl() before calling sub_running_bw().
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20210804135925.3734605-1-dietmar.eggemann@arm.com
When select_idle_cpu starts scanning for an idle CPU, it starts with
a target CPU that has already been checked by select_idle_sibling.
This patch starts with the next CPU instead.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210804115857.6253-3-mgorman@techsingularity.net
After select_idle_sibling, p->recent_used_cpu is set to the
new target. However on the next wakeup, prev will be the same as
recent_used_cpu unless the load balancer has moved the task since the
last wakeup. It still works, but is less efficient than it could be.
This patch preserves recent_used_cpu for longer.
The impact on SIS efficiency is tiny so the SIS statistic patches were
used to track the hit rate for using recent_used_cpu. With perf bench
pipe on a 2-socket Cascadelake machine, the hit rate went from 57.14%
to 85.32%. For more intensive wakeup loads like hackbench, the hit rate
is almost negligible but rose from 0.21% to 6.64%. For scaling loads
like tbench, the hit rate goes from almost 0% to 25.42% overall. Broadly
speaking, on tbench, the success rate is much higher for lower thread
counts and drops to almost 0 as the workload scales to towards saturation.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210804115857.6253-2-mgorman@techsingularity.net
SCHED_FLAG_SUGOV is supposed to be a kernel-only flag that userspace
cannot interact with. However, sched_getattr() currently reports it
in sched_flags if called on a sugov worker even though it is not
actually defined in a UAPI header. To avoid this, make sure to
clean-up the sched_flags field in sched_getattr() before returning to
userspace.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210727101103.2729607-3-qperret@google.com
It is possible for sched_getattr() to incorrectly report the state of
the reset_on_fork flag when called on a deadline task.
Indeed, if the flag was set on a deadline task using sched_setattr()
with flags (SCHED_FLAG_RESET_ON_FORK | SCHED_FLAG_KEEP_PARAMS), then
p->sched_reset_on_fork will be set, but __setscheduler() will bail out
early, which means that the dl_se->flags will not get updated by
__setscheduler_params()->__setparam_dl(). Consequently, if
sched_getattr() is then called on the task, __getparam_dl() will
override kattr.sched_flags with the now out-of-date copy in dl_se->flags
and report the stale value to userspace.
To fix this, make sure to only copy the flags that are relevant to
sched_deadline to and from the dl_se->flags field.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210727101103.2729607-2-qperret@google.com
Use the loop variable instead of the function argument to test the
other SMT siblings for idle.
Fixes: ff7db0bf24 ("sched/numa: Prefer using an idle CPU as a migration target instead of comparing tasks")
Signed-off-by: Mika Penttilä <mika.penttila@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Link: https://lkml.kernel.org/r/20210722063946.28951-1-mika.penttila@gmail.com
On a 128 cores AMD machine, there are 8 cores in nohz_full mode, and
the others are used for housekeeping. When many housekeeping cpus are
in idle state, we can observe huge time burn in the loop for searching
nearest busy housekeeper cpu by ftrace.
9) | get_nohz_timer_target() {
9) | housekeeping_test_cpu() {
9) 0.390 us | housekeeping_get_mask.part.1();
9) 0.561 us | }
9) 0.090 us | __rcu_read_lock();
9) 0.090 us | housekeeping_cpumask();
9) 0.521 us | housekeeping_cpumask();
9) 0.140 us | housekeeping_cpumask();
...
9) 0.500 us | housekeeping_cpumask();
9) | housekeeping_any_cpu() {
9) 0.090 us | housekeeping_get_mask.part.1();
9) 0.100 us | sched_numa_find_closest();
9) 0.491 us | }
9) 0.100 us | __rcu_read_unlock();
9) + 76.163 us | }
for_each_cpu_and() is a micro function, so in get_nohz_timer_target()
function the
for_each_cpu_and(i, sched_domain_span(sd),
housekeeping_cpumask(HK_FLAG_TIMER))
equals to below:
for (i = -1; i = cpumask_next_and(i, sched_domain_span(sd),
housekeeping_cpumask(HK_FLAG_TIMER)), i < nr_cpu_ids;)
That will cause that housekeeping_cpumask() will be invoked many times.
The housekeeping_cpumask() function returns a const value, so it is
unnecessary to invoke it every time. This patch can minimize the worst
searching time from ~76us to ~16us in my testing.
Similarly, the find_new_ilb() function has the same problem.
Co-developed-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Yuan ZhaoXiong <yuanzhaoxiong@baidu.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1622985115-51007-1-git-send-email-yuanzhaoxiong@baidu.com
Since commit '8a99b6833c88(sched: Move SCHED_DEBUG sysctl to debugfs)',
SCHED_DEBUG sysctls are moved to debugfs, so these extern sysctls in
include/linux/sched/sysctl.h are no longer needed for sysctl.c, even
some are no longer needed.
So move those extern sysctls that needed by kernel/sched/debug.c to
kernel/sched/sched.h, and remove others that are no longer needed.
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210606115451.26745-1-liuhailongg6@163.com
Since CPU capacity asymmetry can stem purely from maximum frequency
differences (e.g. Pixel 1), a rebuild of the scheduler topology can be
issued upon loading cpufreq, see:
arch_topology.c::init_cpu_capacity_callback()
Turns out that if this rebuild happens *before* sched_debug_init() is
run (which is a late initcall), we end up messing up the sched_domain debug
directory: passing a NULL parent to debugfs_create_dir() ends up creating
the directory at the debugfs root, which in this case creates
/sys/kernel/debug/domains (instead of /sys/kernel/debug/sched/domains).
This currently doesn't happen on asymmetric systems which use cpufreq-scpi
or cpufreq-dt drivers, as those are loaded via
deferred_probe_initcall() (it is also a late initcall, but appears to be
ordered *after* sched_debug_init()).
Ionela has been working on detecting maximum frequency asymmetry via ACPI,
and that actually happens via a *device* initcall, thus before
sched_debug_init(), and causes the aforementionned debugfs mayhem.
One option would be to punt sched_debug_init() down to
fs_initcall_sync(). Preventing update_sched_domain_debugfs() from running
before sched_debug_init() appears to be the safer option.
Fixes: 3b87f136f8 ("sched,debug: Convert sysctl sched_domains to debugfs")
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lore.kernel.org/r/20210514095339.12979-1-ionela.voinescu@arm.com
The _sum and _avg values are in general sync together with the PELT
divider. They are however not always completely in perfect sync,
resulting in situations where _sum gets to zero while _avg stays
positive. Such situations are undesirable.
This comes from the fact that PELT will increase period_contrib, also
increasing the PELT divider, without updating _sum and _avg values to
stay in perfect sync where (_sum == _avg * divider). However, such PELT
change will never lower _sum, making it impossible to end up in a
situation where _sum is zero and _avg is not.
Therefore, we need to ensure that when subtracting load outside PELT,
that when _sum is zero, _avg is also set to zero. This occurs when
(_sum < _avg * divider), and the subtracted (_avg * divider) is bigger
or equal to the current _sum, while the subtracted _avg is smaller than
the current _avg.
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20210624111815.57937-1-odin@uged.al
Currently the CPU capacity asymmetry detection, performed through
asym_cpu_capacity_level, tries to identify the lowest topology level
at which the highest CPU capacity is being observed, not necessarily
finding the level at which all possible capacity values are visible
to all CPUs, which might be bit problematic for some possible/valid
asymmetric topologies i.e.:
DIE [ ]
MC [ ][ ]
CPU [0] [1] [2] [3] [4] [5] [6] [7]
Capacity |.....| |.....| |.....| |.....|
L M B B
Where:
arch_scale_cpu_capacity(L) = 512
arch_scale_cpu_capacity(M) = 871
arch_scale_cpu_capacity(B) = 1024
In this particular case, the asymmetric topology level will point
at MC, as all possible CPU masks for that level do cover the CPU
with the highest capacity. It will work just fine for the first
cluster, not so much for the second one though (consider the
find_energy_efficient_cpu which might end up attempting the energy
aware wake-up for a domain that does not see any asymmetry at all)
Rework the way the capacity asymmetry levels are being detected,
allowing to point to the lowest topology level (for a given CPU), where
full set of available CPU capacities is visible to all CPUs within given
domain. As a result, the per-cpu sd_asym_cpucapacity might differ across
the domains. This will have an impact on EAS wake-up placement in a way
that it might see different range of CPUs to be considered, depending on
the given current and target CPUs.
Additionally, those levels, where any range of asymmetry (not
necessarily full) is being detected will get identified as well.
The selected asymmetric topology level will be denoted by
SD_ASYM_CPUCAPACITY_FULL sched domain flag whereas the 'sub-levels'
would receive the already used SD_ASYM_CPUCAPACITY flag. This allows
maintaining the current behaviour for asymmetric topologies, with
misfit migration operating correctly on lower levels, if applicable,
as any asymmetry is enough to trigger the misfit migration.
The logic there relies on the SD_ASYM_CPUCAPACITY flag and does not
relate to the full asymmetry level denoted by the sd_asym_cpucapacity
pointer.
Detecting the CPU capacity asymmetry is being based on a set of
available CPU capacities for all possible CPUs. This data is being
generated upon init and updated once CPU topology changes are being
detected (through arch_update_cpu_topology). As such, any changes
to identified CPU capacities (like initializing cpufreq) need to be
explicitly advertised by corresponding archs to trigger rebuilding
the data.
Additional -dflags- parameter, used when building sched domains, has
been removed as well, as the asymmetry flags are now being set directly
in sd_init.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20210603140627.8409-3-beata.michalska@arm.com
Introducing new, complementary to SD_ASYM_CPUCAPACITY, sched_domain
topology flag, to distinguish between shed_domains where any CPU
capacity asymmetry is detected (SD_ASYM_CPUCAPACITY) and ones where
a full set of CPU capacities is visible to all domain members
(SD_ASYM_CPUCAPACITY_FULL).
With the distinction between full and partial CPU capacity asymmetry,
brought in by the newly introduced flag, the scope of the original
SD_ASYM_CPUCAPACITY flag gets shifted, still maintaining the existing
behaviour when one is detected on a given sched domain, allowing
misfit migrations within sched domains that do not observe full range
of CPU capacities but still do have members with different capacity
values. It loses though it's meaning when it comes to the lowest CPU
asymmetry sched_domain level per-cpu pointer, which is to be now
denoted by SD_ASYM_CPUCAPACITY_FULL flag.
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20210603140627.8409-2-beata.michalska@arm.com
Race detected between psi_trigger_destroy/create as shown below, which
cause panic by accessing invalid psi_system->poll_wait->wait_queue_entry
and psi_system->poll_timer->entry->next. Under this modification, the
race window is removed by initialising poll_wait and poll_timer in
group_init which are executed only once at beginning.
psi_trigger_destroy() psi_trigger_create()
mutex_lock(trigger_lock);
rcu_assign_pointer(poll_task, NULL);
mutex_unlock(trigger_lock);
mutex_lock(trigger_lock);
if (!rcu_access_pointer(group->poll_task)) {
timer_setup(poll_timer, poll_timer_fn, 0);
rcu_assign_pointer(poll_task, task);
}
mutex_unlock(trigger_lock);
synchronize_rcu();
del_timer_sync(poll_timer); <-- poll_timer has been reinitialized by
psi_trigger_create()
So, trigger_lock/RCU correctly protects destruction of
group->poll_task but misses this race affecting poll_timer and
poll_wait.
Fixes: 461daba06b ("psi: eliminate kthread_worker from psi trigger scheduling mechanism")
Co-developed-by: ziwei.dai <ziwei.dai@unisoc.com>
Signed-off-by: ziwei.dai <ziwei.dai@unisoc.com>
Co-developed-by: ke.wang <ke.wang@unisoc.com>
Signed-off-by: ke.wang <ke.wang@unisoc.com>
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/1623371374-15664-1-git-send-email-huangzhaoyang@gmail.com
The CFS bandwidth controller limits CPU requests of a task group to
quota during each period. However, parallel workloads might be bursty
so that they get throttled even when their average utilization is under
quota. And they are latency sensitive at the same time so that
throttling them is undesired.
We borrow time now against our future underrun, at the cost of increased
interference against the other system users. All nicely bounded.
Traditional (UP-EDF) bandwidth control is something like:
(U = \Sum u_i) <= 1
This guaranteeds both that every deadline is met and that the system is
stable. After all, if U were > 1, then for every second of walltime,
we'd have to run more than a second of program time, and obviously miss
our deadline, but the next deadline will be further out still, there is
never time to catch up, unbounded fail.
This work observes that a workload doesn't always executes the full
quota; this enables one to describe u_i as a statistical distribution.
For example, have u_i = {x,e}_i, where x is the p(95) and x+e p(100)
(the traditional WCET). This effectively allows u to be smaller,
increasing the efficiency (we can pack more tasks in the system), but at
the cost of missing deadlines when all the odds line up. However, it
does maintain stability, since every overrun must be paired with an
underrun as long as our x is above the average.
That is, suppose we have 2 tasks, both specify a p(95) value, then we
have a p(95)*p(95) = 90.25% chance both tasks are within their quota and
everything is good. At the same time we have a p(5)p(5) = 0.25% chance
both tasks will exceed their quota at the same time (guaranteed deadline
fail). Somewhere in between there's a threshold where one exceeds and
the other doesn't underrun enough to compensate; this depends on the
specific CDFs.
At the same time, we can say that the worst case deadline miss, will be
\Sum e_i; that is, there is a bounded tardiness (under the assumption
that x+e is indeed WCET).
The benefit of burst is seen when testing with schbench. Default value of
kernel.sched_cfs_bandwidth_slice_us(5ms) and CONFIG_HZ(1000) is used.
mkdir /sys/fs/cgroup/cpu/test
echo $$ > /sys/fs/cgroup/cpu/test/cgroup.procs
echo 100000 > /sys/fs/cgroup/cpu/test/cpu.cfs_quota_us
echo 100000 > /sys/fs/cgroup/cpu/test/cpu.cfs_burst_us
./schbench -m 1 -t 3 -r 20 -c 80000 -R 10
The average CPU usage is at 80%. I run this for 10 times, and got long tail
latency for 6 times and got throttled for 8 times.
Tail latencies are shown below, and it wasn't the worst case.
Latency percentiles (usec)
50.0000th: 19872
75.0000th: 21344
90.0000th: 22176
95.0000th: 22496
*99.0000th: 22752
99.5000th: 22752
99.9000th: 22752
min=0, max=22727
rps: 9.90 p95 (usec) 22496 p99 (usec) 22752 p95/cputime 28.12% p99/cputime 28.44%
The interferenece when using burst is valued by the possibilities for
missing the deadline and the average WCET. Test results showed that when
there many cgroups or CPU is under utilized, the interference is
limited. More details are shown in:
https://lore.kernel.org/lkml/5371BD36-55AE-4F71-B9D7-B86DC32E3D2B@linux.alibaba.com/
Co-developed-by: Shanpei Chen <shanpeic@linux.alibaba.com>
Signed-off-by: Shanpei Chen <shanpeic@linux.alibaba.com>
Co-developed-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Huaixin Chang <changhuaixin@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20210621092800.23714-2-changhuaixin@linux.alibaba.com
Now cpu.uclamp.min acts as a protection, we need to make sure that the
uclamp request of the task is within the allowed range of the cgroup,
that is it is clamp()'ed correctly by tg->uclamp[UCLAMP_MIN] and
tg->uclamp[UCLAMP_MAX].
As reported by Xuewen [1] we can have some corner cases where there's
inversion between uclamp requested by task (p) and the uclamp values of
the taskgroup it's attached to (tg). Following table demonstrates
2 corner cases:
| p | tg | effective
-----------+-----+------+-----------
CASE 1
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 60%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
CASE 2
-----------+-----+------+-----------
uclamp_min | 0% | 30% | 30%
-----------+-----+------+-----------
uclamp_max | 20% | 50% | 20%
-----------+-----+------+-----------
With this fix we get:
| p | tg | effective
-----------+-----+------+-----------
CASE 1
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 50%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
CASE 2
-----------+-----+------+-----------
uclamp_min | 0% | 30% | 30%
-----------+-----+------+-----------
uclamp_max | 20% | 50% | 30%
-----------+-----+------+-----------
Additionally uclamp_update_active_tasks() must now unconditionally
update both UCLAMP_MIN/MAX because changing the tg's UCLAMP_MAX for
instance could have an impact on the effective UCLAMP_MIN of the tasks.
| p | tg | effective
-----------+-----+------+-----------
old
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 50%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
*new*
-----------+-----+------+-----------
uclamp_min | 60% | 0% | *60%*
-----------+-----+------+-----------
uclamp_max | 80% |*70%* | *70%*
-----------+-----+------+-----------
[1] https://lore.kernel.org/lkml/CAB8ipk_a6VFNjiEnHRHkUMBKbA+qzPQvhtNjJ_YNzQhqV_o8Zw@mail.gmail.com/
Fixes: 0c18f2ecfc ("sched/uclamp: Fix wrong implementation of cpu.uclamp.min")
Reported-by: Xuewen Yan <xuewen.yan94@gmail.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210617165155.3774110-1-qais.yousef@arm.com
DL keeps track of the utilization on a per-rq basis with the structure
avg_dl. This utilization is updated during task_tick_dl(),
put_prev_task_dl() and set_next_task_dl(). However, when the current
running task changes its policy, set_next_task_dl() which would usually
take care of updating the utilization when the rq starts running DL
tasks, will not see a such change, leaving the avg_dl structure outdated.
When that very same task will be dequeued later, put_prev_task_dl() will
then update the utilization, based on a wrong last_update_time, leading to
a huge spike in the DL utilization signal.
The signal would eventually recover from this issue after few ms. Even
if no DL tasks are run, avg_dl is also updated in
__update_blocked_others(). But as the CPU capacity depends partly on the
avg_dl, this issue has nonetheless a significant impact on the scheduler.
Fix this issue by ensuring a load update when a running task changes
its policy to DL.
Fixes: 3727e0e ("sched/dl: Add dl_rq utilization tracking")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/1624271872-211872-3-git-send-email-vincent.donnefort@arm.com
RT keeps track of the utilization on a per-rq basis with the structure
avg_rt. This utilization is updated during task_tick_rt(),
put_prev_task_rt() and set_next_task_rt(). However, when the current
running task changes its policy, set_next_task_rt() which would usually
take care of updating the utilization when the rq starts running RT tasks,
will not see a such change, leaving the avg_rt structure outdated. When
that very same task will be dequeued later, put_prev_task_rt() will then
update the utilization, based on a wrong last_update_time, leading to a
huge spike in the RT utilization signal.
The signal would eventually recover from this issue after few ms. Even if
no RT tasks are run, avg_rt is also updated in __update_blocked_others().
But as the CPU capacity depends partly on the avg_rt, this issue has
nonetheless a significant impact on the scheduler.
Fix this issue by ensuring a load update when a running task changes
its policy to RT.
Fixes: 371bf427 ("sched/rt: Add rt_rq utilization tracking")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/1624271872-211872-2-git-send-email-vincent.donnefort@arm.com
Change the type and name of task_struct::state. Drop the volatile and
shrink it to an 'unsigned int'. Rename it in order to find all uses
such that we can use READ_ONCE/WRITE_ONCE as appropriate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20210611082838.550736351@infradead.org
All 6 architectures define TASK_STATE in asm-offsets, but then never
actually use it. Remove the definitions to make sure they never will.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210611082838.472811363@infradead.org
There's an existing helper for setting TASK_RUNNING; must've gotten
lost last time we did this cleanup.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210611082838.409696194@infradead.org
When ran from the sched-out path (preempt_notifier or perf_event),
p->state is irrelevant to determine preemption. You can get preempted
with !task_is_running() just fine.
The right indicator for preemption is if the task is still on the
runqueue in the sched-out path.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210611082838.285099381@infradead.org
Replace a bunch of 'p->state == TASK_RUNNING' with a new helper:
task_is_running(p).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210611082838.222401495@infradead.org
Remove broken task->state references and let wake_up_process() DTRT.
The anti-pattern in these patches breaks the ordering of ->state vs
COND as described in the comment near set_current_state() and can lead
to missed wakeups:
(OoO load, observes RUNNING)<-.
for (;;) { |
t->state = UNINTERRUPTIBLE; |
smp_mb(); ,-----> | (observes !COND)
| /
if (COND) ---------' | COND = 1;
break; `- if (t->state != RUNNING)
wake_up_process(t); // not done
schedule(); // forever waiting
}
t->state = TASK_RUNNING;
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210611082838.160855222@infradead.org
This commit in sched/urgent moved the cfs_rq_is_decayed() function:
a7b359fc6a37: ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
and this fresh commit in sched/core modified it in the old location:
9e077b52d86a: ("sched/pelt: Check that *_avg are null when *_sum are")
Merge the two variants.
Conflicts:
kernel/sched/fair.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a partial forward-port of Peter Ziljstra's work first posted
at:
https://lore.kernel.org/lkml/20180530142236.667774973@infradead.org/
Currently select_idle_cpu()'s proportional scheme uses the average idle
time *for when we are idle*, that is temporally challenged. When a CPU
is not at all idle, we'll happily continue using whatever value we did
see when the CPU goes idle. To fix this, introduce a separate average
idle and age it (the existing value still makes sense for things like
new-idle balancing, which happens when we do go idle).
The overall goal is to not spend more time scanning for idle CPUs than
we're idle for. Otherwise we're inhibiting work. This means that we need to
consider the cost over all the wake-ups between consecutive idle periods.
To track this, the scan cost is subtracted from the estimated average
idle time.
The impact of this patch is related to workloads that have domains that
are fully busy or overloaded. Without the patch, the scan depth may be
too high because a CPU is not reaching idle.
Due to the nature of the patch, this is a regression magnet. It
potentially wins when domains are almost fully busy or overloaded --
at that point searches are likely to fail but idle is not being aged
as CPUs are active so search depth is too large and useless. It will
potentially show regressions when there are idle CPUs and a deep search is
beneficial. This tbench result on a 2-socket broadwell machine partially
illustates the problem
5.13.0-rc2 5.13.0-rc2
vanilla sched-avgidle-v1r5
Hmean 1 445.02 ( 0.00%) 451.36 * 1.42%*
Hmean 2 830.69 ( 0.00%) 846.03 * 1.85%*
Hmean 4 1350.80 ( 0.00%) 1505.56 * 11.46%*
Hmean 8 2888.88 ( 0.00%) 2586.40 * -10.47%*
Hmean 16 5248.18 ( 0.00%) 5305.26 * 1.09%*
Hmean 32 8914.03 ( 0.00%) 9191.35 * 3.11%*
Hmean 64 10663.10 ( 0.00%) 10192.65 * -4.41%*
Hmean 128 18043.89 ( 0.00%) 18478.92 * 2.41%*
Hmean 256 16530.89 ( 0.00%) 17637.16 * 6.69%*
Hmean 320 16451.13 ( 0.00%) 17270.97 * 4.98%*
Note that 8 was a regression point where a deeper search would have helped
but it gains for high thread counts when searches are useless. Hackbench
is a more extreme example although not perfect as the tasks idle rapidly
hackbench-process-pipes
5.13.0-rc2 5.13.0-rc2
vanilla sched-avgidle-v1r5
Amean 1 0.3950 ( 0.00%) 0.3887 ( 1.60%)
Amean 4 0.9450 ( 0.00%) 0.9677 ( -2.40%)
Amean 7 1.4737 ( 0.00%) 1.4890 ( -1.04%)
Amean 12 2.3507 ( 0.00%) 2.3360 * 0.62%*
Amean 21 4.0807 ( 0.00%) 4.0993 * -0.46%*
Amean 30 5.6820 ( 0.00%) 5.7510 * -1.21%*
Amean 48 8.7913 ( 0.00%) 8.7383 ( 0.60%)
Amean 79 14.3880 ( 0.00%) 13.9343 * 3.15%*
Amean 110 21.2233 ( 0.00%) 19.4263 * 8.47%*
Amean 141 28.2930 ( 0.00%) 25.1003 * 11.28%*
Amean 172 34.7570 ( 0.00%) 30.7527 * 11.52%*
Amean 203 41.0083 ( 0.00%) 36.4267 * 11.17%*
Amean 234 47.7133 ( 0.00%) 42.0623 * 11.84%*
Amean 265 53.0353 ( 0.00%) 47.7720 * 9.92%*
Amean 296 60.0170 ( 0.00%) 53.4273 * 10.98%*
Stddev 1 0.0052 ( 0.00%) 0.0025 ( 51.57%)
Stddev 4 0.0357 ( 0.00%) 0.0370 ( -3.75%)
Stddev 7 0.0190 ( 0.00%) 0.0298 ( -56.64%)
Stddev 12 0.0064 ( 0.00%) 0.0095 ( -48.38%)
Stddev 21 0.0065 ( 0.00%) 0.0097 ( -49.28%)
Stddev 30 0.0185 ( 0.00%) 0.0295 ( -59.54%)
Stddev 48 0.0559 ( 0.00%) 0.0168 ( 69.92%)
Stddev 79 0.1559 ( 0.00%) 0.0278 ( 82.17%)
Stddev 110 1.1728 ( 0.00%) 0.0532 ( 95.47%)
Stddev 141 0.7867 ( 0.00%) 0.0968 ( 87.69%)
Stddev 172 1.0255 ( 0.00%) 0.0420 ( 95.91%)
Stddev 203 0.8106 ( 0.00%) 0.1384 ( 82.92%)
Stddev 234 1.1949 ( 0.00%) 0.1328 ( 88.89%)
Stddev 265 0.9231 ( 0.00%) 0.0820 ( 91.11%)
Stddev 296 1.0456 ( 0.00%) 0.1327 ( 87.31%)
Again, higher thread counts benefit and the standard deviation
shows that results are also a lot more stable when the idle
time is aged.
The patch potentially matters when a socket was multiple LLCs as the
maximum search depth is lower. However, some of the test results were
suspiciously good (e.g. specjbb2005 gaining 50% on a Zen1 machine) and
other results were not dramatically different to other mcahines.
Given the nature of the patch, Peter's full series is not being forward
ported as each part should stand on its own. Preferably they would be
merged at different times to reduce the risk of false bisections.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210615111611.GH30378@techsingularity.net
Energy Aware Scheduling (EAS) needs to predict the decisions made by
SchedUtil. The map_util_freq() exists to do that.
There are corner cases where the max allowed frequency might be reduced
(due to thermal). SchedUtil as a CPUFreq governor, is aware of that
but EAS is not. This patch aims to address it.
SchedUtil stores the maximum allowed frequency in
'sugov_policy::next_freq' field. EAS has to predict that value, which is
the real used frequency. That value is made after a call to
cpufreq_driver_resolve_freq() which clamps to the CPUFreq policy limits.
In the existing code EAS is not able to predict that real frequency.
This leads to energy estimation errors.
To avoid wrong energy estimation in EAS (due to frequency miss prediction)
make sure that the step which calculates Performance Domain frequency,
is also aware of the allowed CPU capacity.
Furthermore, modify map_util_freq() to not extend the frequency value.
Instead, use map_util_perf() to extend the util value in both places:
SchedUtil and EAS, but for EAS clamp it to max allowed CPU capacity.
In the end, we achieve the same desirable behavior for both subsystems
and alignment in regards to the real CPU frequency.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> (For the schedutil part)
Link: https://lore.kernel.org/r/20210614191238.23224-1-lukasz.luba@arm.com
Energy Aware Scheduling (EAS) needs to be able to predict the frequency
requests made by the SchedUtil governor to properly estimate energy used
in the future. It has to take into account CPUs utilization and forecast
Performance Domain (PD) frequency. There is a corner case when the max
allowed frequency might be reduced due to thermal. SchedUtil is aware of
that reduced frequency, so it should be taken into account also in EAS
estimations.
SchedUtil, as a CPUFreq governor, knows the maximum allowed frequency of
a CPU, thanks to cpufreq_driver_resolve_freq() and internal clamping
to 'policy::max'. SchedUtil is responsible to respect that upper limit
while setting the frequency through CPUFreq drivers. This effective
frequency is stored internally in 'sugov_policy::next_freq' and EAS has
to predict that value.
In the existing code the raw value of arch_scale_cpu_capacity() is used
for clamping the returned CPU utilization from effective_cpu_util().
This patch fixes issue with too big single CPU utilization, by introducing
clamping to the allowed CPU capacity. The allowed CPU capacity is a CPU
capacity reduced by thermal pressure raw value.
Thanks to knowledge about allowed CPU capacity, we don't get too big value
for a single CPU utilization, which is then added to the util sum. The
util sum is used as a source of information for estimating whole PD energy.
To avoid wrong energy estimation in EAS (due to capped frequency), make
sure that the calculation of util sum is aware of allowed CPU capacity.
This thermal pressure might be visible in scenarios where the CPUs are not
heavily loaded, but some other component (like GPU) drastically reduced
available power budget and increased the SoC temperature. Thus, we still
use EAS for task placement and CPUs are not over-utilized.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20210614191128.22735-1-lukasz.luba@arm.com
The thermal pressure signal gives information to the scheduler about
reduced CPU capacity due to thermal. It is based on a value stored in
a per-cpu 'thermal_pressure' variable. The online CPUs will get the
new value there, while the offline won't. Unfortunately, when the CPU
is back online, the value read from per-cpu variable might be wrong
(stale data). This might affect the scheduler decisions, since it
sees the CPU capacity differently than what is actually available.
Fix it by making sure that all online+offline CPUs would get the
proper value in their per-cpu variable when thermal framework sets
capping.
Fixes: f12e4f66ab ("thermal/cpu-cooling: Update thermal pressure in case of a maximum frequency capping")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20210614191030.22241-1-lukasz.luba@arm.com
In case the _avg delta is 0 there is no need to update se's _avg
(level n) nor cfs_rq's _avg (level n-1). These values stay the same.
Since cfs_rq's _avg isn't changed, i.e. no load is propagated down,
cfs_rq's _sum should stay the same as well.
So bail out after se's _sum has been updated.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210601083616.804229-1-dietmar.eggemann@arm.com
Check that we never break the rule that pelt's avg values are null if
pelt's sum are.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Odin Ugedal <odin@uged.al>
Link: https://lore.kernel.org/r/20210601155328.19487-1-vincent.guittot@linaro.org
Fix an issue where fairness is decreased since cfs_rq's can end up not
being decayed properly. For two sibling control groups with the same
priority, this can often lead to a load ratio of 99/1 (!!).
This happens because when a cfs_rq is throttled, all the descendant
cfs_rq's will be removed from the leaf list. When they initial cfs_rq
is unthrottled, it will currently only re add descendant cfs_rq's if
they have one or more entities enqueued. This is not a perfect
heuristic.
Instead, we insert all cfs_rq's that contain one or more enqueued
entities, or it its load is not completely decayed.
Can often lead to situations like this for equally weighted control
groups:
$ ps u -C stress
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 10009 88.8 0.0 3676 100 pts/1 R+ 11:04 0:13 stress --cpu 1
root 10023 3.0 0.0 3676 104 pts/1 R+ 11:04 0:00 stress --cpu 1
Fixes: 31bc6aeaab ("sched/fair: Optimize update_blocked_averages()")
[vingo: !SMP build fix]
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210612112815.61678-1-odin@uged.al
Highlights include
Stable fixes:
- Fix use-after-free in nfs4_init_client()
Bugfixes:
- Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
- Fix second deadlock in nfs4_evict_inode()
- nfs4_proc_set_acl should not change the value of NFS_CAP_UIDGID_NOMAP
- Fix setting of the NFS_CAP_SECURITY_LABEL capability
-----BEGIN PGP SIGNATURE-----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=PABi
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix use-after-free in nfs4_init_client()
Bugfixes:
- Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
- Fix second deadlock in nfs4_evict_inode()
- nfs4_proc_set_acl should not change the value of NFS_CAP_UIDGID_NOMAP
- Fix setting of the NFS_CAP_SECURITY_LABEL capability"
* tag 'nfs-for-5.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Fix second deadlock in nfs4_evict_inode()
NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
NFS: FMODE_READ and friends are C macros, not enum types
NFS: Fix a potential NULL dereference in nfs_get_client()
NFS: Fix use-after-free in nfs4_init_client()
NFS: Ensure the NFS_CAP_SECURITY_LABEL capability is set when appropriate
NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.
Four reasonably small fixes to the core for scsi host allocation
failure paths. The root problem is that we're not freeing the memory
allocated by dev_set_name(), which involves a rejig of may of the free
on error paths to do put_device() instead of kfree which, in turn, has
several other knock on ramifications and inspection turned up a few
other lurking bugs.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYMYEVCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbP/AP4oyLA5
h7T5v7z29prQWn0P3TApcDVvXjOnqPNUzZlvkAEAifnVHLMehlzrJDeaSR0OUf8u
U+SKrsxkiov5XYvwGGU=
=0Vfx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four reasonably small fixes to the core for scsi host allocation
failure paths.
The root problem is that we're not freeing the memory allocated by
dev_set_name(), which involves a rejig of may of the free on error
paths to do put_device() instead of kfree which, in turn, has several
other knock on ramifications and inspection turned up a few other
lurking bugs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Only put parent device if host state differs from SHOST_CREATED
scsi: core: Put .shost_dev in failure path if host state changes to RUNNING
scsi: core: Fix failure handling of scsi_add_host_with_dma()
scsi: core: Fix error handling of scsi_host_alloc()
* A pair of XIP fixes: one to fix alternatives, and one to turn off the
rest of the features that require code modification.
* A fix to a type that was causing some alternatives to break.
* A build fix for BUILTIN_DTB.
-----BEGIN PGP SIGNATURE-----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=c3op
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of XIP fixes: one to fix alternatives, and one to turn off the
rest of the features that require code modification
- A fix to a type that was causing some alternatives to break
- A build fix for BUILTIN_DTB
* tag 'riscv-for-linus-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix BUILTIN_DTB for sifive and microchip soc
riscv: alternative: fix typo in macro name
riscv: code patching only works on !XIP_KERNEL
riscv: xip: support runtime trap patching
0day robot reported a 9.2% regression for will-it-scale mmap1 test
case[1], caused by commit 57efa1fe59 ("mm/gup: prevent gup_fast from
racing with COW during fork").
Further debug shows the regression is due to that commit changes the
offset of hot fields 'mmap_lock' inside structure 'mm_struct', thus some
cache alignment changes.
From the perf data, the contention for 'mmap_lock' is very severe and
takes around 95% cpu cycles, and it is a rw_semaphore
struct rw_semaphore {
atomic_long_t count; /* 8 bytes */
atomic_long_t owner; /* 8 bytes */
struct optimistic_spin_queue osq; /* spinner MCS lock */
...
Before commit 57efa1fe59 adds the 'write_protect_seq', it happens to
have a very optimal cache alignment layout, as Linus explained:
"and before the addition of the 'write_protect_seq' field, the
mmap_sem was at offset 120 in 'struct mm_struct'.
Which meant that count and owner were in two different cachelines,
and then when you have contention and spend time in
rwsem_down_write_slowpath(), this is probably *exactly* the kind
of layout you want.
Because first the rwsem_write_trylock() will do a cmpxchg on the
first cacheline (for the optimistic fast-path), and then in the
case of contention, rwsem_down_write_slowpath() will just access
the second cacheline.
Which is probably just optimal for a load that spends a lot of
time contended - new waiters touch that first cacheline, and then
they queue themselves up on the second cacheline."
After the commit, the rw_semaphore is at offset 128, which means the
'count' and 'owner' fields are now in the same cacheline, and causes
more cache bouncing.
Currently there are 3 "#ifdef CONFIG_XXX" before 'mmap_lock' which will
affect its offset:
CONFIG_MMU
CONFIG_MEMBARRIER
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES
The layout above is on 64 bits system with 0day's default kernel config
(similar to RHEL-8.3's config), in which all these 3 options are 'y'.
And the layout can vary with different kernel configs.
Relayouting a structure is usually a double-edged sword, as sometimes it
can helps one case, but hurt other cases. For this case, one solution
is, as the newly added 'write_protect_seq' is a 4 bytes long seqcount_t
(when CONFIG_DEBUG_LOCK_ALLOC=n), placing it into an existing 4 bytes
hole in 'mm_struct' will not change other fields' alignment, while
restoring the regression.
Link: https://lore.kernel.org/lkml/20210525031636.GB7744@xsang-OptiPlex-9020/ [1]
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
