When ocfs2 has to do CoW for refcounted extents, we disable direct I/O
and go through the buffered I/O path. This makes the combined check
easier to read.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch add extent block (metadata) stealing mechanism for
extent allocation. This mechanism is same as the inode stealing.
if no room in slot specific extent_alloc, we will try to
allocate extent block from the next slot.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Connect and disconnect messages are more than informational as they are required
during root cause analysis for failures. This patch changes them from KERN_INFO
to KERN_NOTICE.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Faseh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The debug call printing the name of the lock resource was chopping
off the last character. This patch fixes the problem.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
The wrong member was compared in the continguousness check.
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During recovery, the dlm frees the locks for the dead node. If it finds a
lock in a resource for the dead node, it expects that node to also have a
ref in that lock resource. If not, it BUGs.
ossbz#1175 was filed with the above BUG. Now, while it is correct that we
should be expecting the ref, I see no reason why we have to BUG. After all,
we are freeing up the lock and clearing the ref.
This patch replaces the BUG_ON with a printk(). Hopefully, that will give
us more clues next time this happens.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1175
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch plugs a race between the downconvert thread and an unlock ast message.
Specifically, after the downconvert worker has done its task, the dc thread needs
to check whether an unlock ast made the downconvert moot.
Reported-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@sus.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During blocked lock processing, we should consider the possibility that the
lock is no longer blocking.
Joel Becker <joel.becker@oracle.com> assisted in fixing this issue.
Reported-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During upconvert, if the master were to send a BAST, dlmglue will detect the
upconversion in process and send a cancel convert to the master. Upon receiving
the AST for the cancel convert, it will re-process the lock resource to determine
whether it needs downconverting. Say, the up was from PR to EX and the BAST was
for EX. After the cancel convert, it will need to downconvert to NL.
However, if the node was originally upconverting from NL to EX, then there would
be no reason to downconvert (assuming the same message sequence).
This patch makes dlmglue consider the possibility that the current lock level
is already compatible and that downconverting is not required.
Joel Becker <joel.becker@oracle.com> assisted in fixing this issue.
Fixes ossbz#1178
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1178
Reported-by: Coly Li <coly.li@suse.de>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
There is possibility of a livelock in __ocfs2_cluster_lock(). If a node were
to get an ast for an upconvert request, followed immediately by a bast,
there is a small window where the fs may downconvert the lock before the
process requesting the upconvert is able to take the lock.
This patch adds a new flag to indicate that the upconvert is still in
progress and that the dc thread should not downconvert it right now.
Wengang Wang <wen.gang.wang@oracle.com> and Joel Becker
<joel.becker@oracle.com> contributed heavily to this patch.
Reported-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During bast, set the OCFS2_LOCK_BLOCKED flag only if the lock needs to
downconverted.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Although we use u64 to pass userspace pointers to the kernel
to avoid compat_ioctl, it doesn't work in some ppc platform.
So wrap them with compat_ptr and add compat_ioctl.
The detailed discussion about compat_ptr can be found in thread
http://lkml.org/lkml/2009/10/27/423.
We indeed met with a bug when testing on ppc(-EFAULT is returned
when using old_path). This patch try to fix this.
I have tested in ppc64(with 32 bit reflink) and x86_64(with i686
reflink), both works.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Mainline commit aad1b15310 made the
dlm_begin_reco_handler() return -EAGAIN instead of EAGAIN.
As this error is transmitted over the wire, we want the receiver,
dlm_send_begin_reco_message(), to understand both the older EAGAIN and
the newer -EAGAIN, to allow rolling upgrade of the cluster nodes.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In CoW, we have to make sure that the page is already written
out to the disk. So we have a BUG_ON(PageDirty(page)).
In ppc platform we have pagesize=64K, so if the cs=4K, if the
file have fragmented clusters, we will map the page many times.
See this file as an example.
Tree Depth: 0 Count: 19 Next Free Rec: 14
## Offset Clusters Block# Flags
0 0 4 2164864 0x2 Refcounted
1 4 2 9302792 0x2 Refcounted
...
We have to replace the extent recs one by one, so the page with index 0
will be mapped and dirtied twice.
I'd like to leave the BUG_ON there while adding a check so that in
case we meet with an error in other platforms, we can find it easily.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2_duplicate_clusters_by_page, we calculate map_end
by shifting page_index. But actually in case we meet with
a large offset(say in a i686 box, poff_t is only 32 bits
and page_index=2056240), we will overflow. So change the
type of page_index to loff_t.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
When a lock resource is migrated, the dlm compares the migrated
locks with that that was already existing on the new node. If the
comparison fails, it BUGs. This patch prints more messages when the
comparison fails inorder to help with the root cause analyis.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1206
This does not fix bz1206. However, if we run into it again, we will
have more information to chew on.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
During lock resource migration, o2dlm fills the packet with a LVB from the
first valid lock. For sanity, it ensures that the other valid locks have the
same LVB. If not, it BUGs.
The valid locks are ones that have granted EX or PR lock levels and are either
on the Granted or Converting lists. Locks in the Blocked list cannot have a
valid LVB.
This patch ensures that we skip the locks in the Blocked list.
Fixes oss bugzilla#1202
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1202
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
a local variable "dlm_version" is used as a fs locking version.
rename it fs_version.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In ocfs2-tools, we have added ocfs2_max_inline_data_with_xattr,
so add it in the kernel's ocfs2_fs.h.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
If ->follow_link handler returns an error, it should decrement
nd->path refcnt. But ocfs2_fast_follow_link() doesn't decrement.
This patch fixes the problem by using nd_set_link() style error handling
instead of playing with nd->path.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
In case of writing to a refcounted cluster with O_DIRECT,
we need to fall back to buffer write. And when it is finished,
we need to flush the page and the journal as we did for other
O_DIRECT writes.
This patch fix oss bug 1191.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1191
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Tested-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2/trivial: Use le16_to_cpu for a disk value in xattr.c
ocfs2/trivial: Use proper mask for 2 places in hearbeat.c
Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.
Ocfs2: Should ocfs2 support fiemap for S_IFDIR inode?
ocfs2: Use FIEMAP_EXTENT_SHARED
fiemap: Add new extent flag FIEMAP_EXTENT_SHARED
ocfs2: replace u8 by __u8 in ocfs2_fs.h
ocfs2: explicit declare uninitialized var in user_cluster_connect()
ocfs2-devel: remove redundant OCFS2_MOUNT_POSIX_ACL check in ocfs2_get_acl_nolock()
ocfs2: return -EAGAIN instead of EAGAIN in dlm
ocfs2/cluster: Make fence method configurable - v2
ocfs2: Set MS_POSIXACL on remount
ocfs2: Make acl use the default
ocfs2: Always include ACL support
In ocfs2_value_metas_in_xattr_header, we should Use
le16_to_cpu for ocfs2_extent_list.l_next_free_rec.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
I just noticed today that there are 2 places of "mlog(0,...)"
in fs/ocfs2/cluster/heartbeat.c, but actually have no default
mask prefix in that file.
So change them to mlog(ML_HEARTBEAT,...).
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
For fast symlink, it can be treated the same as inlined files since
the data extent we want to return of both case all were stored in
metadata block. For symlink, it can be simply treated the same as we
did for regular files.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Acked-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: Set i_nlink properly during reflink.
ocfs2: Add reflinked file's inode to inode hash eariler.
ocfs2: refcounttree.c cleanup.
ocfs2: Find proper end cpos for a leaf refcount block.
We create a file in orphan dir for reflink so that if there
is any error, we don't create any wrong dentry in the dir.
But actually the file in orphan dir should be i_nlink = 0
so that it can be replayed and freed successfully.
This patch first set i_nlink to 0 when creating the file in
orphan dir and then set it to 1(reflink now only works for
regular file) when we move it to the dest dir.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
We used to add reflinked file's inode to inode hash when
we add it to the dest dir. But actually there is a race.
Consider the following sequence.
1. reflink happens and create the inode in orphan dir.
2. reflink thread is scheduled out because of some io.
3. recovery begins to work and calls ocfs2_recover_orphans.
It calls ocfs2_iget and get a new inode and i_count = 1.
It calls iput then and delete inode. the buffer's
uptodate state is cleared.
This patch move insert_inode_hash to the create function so
that it can be found by step 3 and prevented from deleting
because i_count > 1.
This resolves the bug
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1183.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Let userspace have a chance to get the extent info of a
directory just like extN did.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Adds FIEMAP_EXTENT_SHARED flag to refcounted extents.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch replaces date type 'u8' with '__u8', which follows the coding style of ocfs2_fs.h, and portable to user space
for ocfs2-tools.
Signed-off-by: Coly Li <coly.li@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
This patch explicitly declares an uninitialized local variable in user_cluster_connect(), to remove a compiling warning.
Signed-off-by: Coly Li <coly.li@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
osb->s_mount_opt has already been checked against OCFS2_MOUNT_POSIX_ACL_CHECK before
calling ocfs2_get_acl_nolock() in ocfs2_init_acl() && ocfs2_get_acl(), so remove it.
Signed-off-by: Jeff Liu <jeff.liu@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
do_sync_mapping_range(..., SYNC_FILE_RANGE_WRITE) is a very awkward way
to perform a filemap_fdatawrite_range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently the locking in blockdev_direct_IO is a mess, we have three different
locking types and very confusing checks for some of them. The most
complicated one is DIO_OWN_LOCKING for reads, which happens to not actually be
used.
This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read case
is unused anyway, and the write side is almost identical to DIO_NO_LOCKING.
The difference is that DIO_NO_LOCKING always sets the create argument for
the get_blocks callback to zero, but we can easily move that to the actual
get_blocks callbacks. There are four users of the DIO_NO_LOCKING mode:
gfs already ignores the create argument and thus is fine with the new
version, ocfs2 only errors out if create were ever set, and we can remove
this dead code now, the block device code only ever uses create for an
error message if we are fully beyond the device which can never happen,
and last but not least XFS will need the new behavour for writes.
Now we can replace the lock_type variable with a flags one, where no flag
means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first
flag. Separate out the check for not allowing to fill holes into a separate
flag, although for now both flags always get set at the same time.
Also revamp the documentation of the locking scheme to actually make sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a flags argument to struct xattr_handler and pass it to all xattr
handler methods. This allows using the same methods for multiple
handlers, e.g. for the ACL methods which perform exactly the same action
for the access and default ACLs, just using a different underlying
attribute. With a little more groundwork it'll also allow sharing the
methods for the regular user/trusted/secure handlers in extN, ocfs2 and
jffs2 like it's already done for xfs in this patch.
Also change the inode argument to the handlers to a dentry to allow
using the handlers mechnism for filesystems that require it later,
e.g. cifs.
[with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move definition of this constant to linux/quota.h so that it
cannot clash with other format IDs.
CC: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
While Linux provided an O_SYNC flag basically since day 1, it took until
Linux 2.4.0-test12pre2 to actually get it implemented for filesystems,
since that day we had generic_osync_around with only minor changes and the
great "For now, when the user asks for O_SYNC, we'll actually give
O_DSYNC" comment. This patch intends to actually give us real O_SYNC
semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC
patches which are required before this patch it's actually surprisingly
simple, we just need to figure out when to set the datasync flag to
vfs_fsync_range and when not.
This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's
numerical value to keep binary compatibility, and adds a new real O_SYNC
flag. To guarantee backwards compatiblity it is defined as expanding to
both the O_DSYNC and the new additional binary flag (__O_SYNC) to make
sure we are backwards-compatible when compiled against the new headers.
This also means that all places that don't care about the differences can
just check O_DSYNC and get the right behaviour for O_SYNC, too - only
places that actuall care need to check __O_SYNC in addition. Drivers and
network filesystems have been updated in a fail safe way to always do the
full sync magic if O_DSYNC is set. The few places setting O_SYNC for
lower layers are kept that way for now to stay failsafe.
We enforce that O_DSYNC is set when __O_SYNC is set early in the open path
to make sure we always get these sane options.
Note that parisc really screwed up their headers as they already define a
O_DSYNC that has always been a no-op. We try to repair it by using it for
the new O_DSYNC and redefinining O_SYNC to send both the traditional
O_SYNC numerical value _and_ the O_DSYNC one.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger@sun.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1815 commits)
mac80211: fix reorder buffer release
iwmc3200wifi: Enable wimax core through module parameter
iwmc3200wifi: Add wifi-wimax coexistence mode as a module parameter
iwmc3200wifi: Coex table command does not expect a response
iwmc3200wifi: Update wiwi priority table
iwlwifi: driver version track kernel version
iwlwifi: indicate uCode type when fail dump error/event log
iwl3945: remove duplicated event logging code
b43: fix two warnings
ipw2100: fix rebooting hang with driver loaded
cfg80211: indent regulatory messages with spaces
iwmc3200wifi: fix NULL pointer dereference in pmkid update
mac80211: Fix TX status reporting for injected data frames
ath9k: enable 2GHz band only if the device supports it
airo: Fix integer overflow warning
rt2x00: Fix padding bug on L2PAD devices.
WE: Fix set events not propagated
b43legacy: avoid PPC fault during resume
b43: avoid PPC fault during resume
tcp: fix a timewait refcnt race
...
Fix up conflicts due to sysctl cleanups (dead sysctl_check code and
CTL_UNNUMBERED removed) in
kernel/sysctl_check.c
net/ipv4/sysctl_net_ipv4.c
net/ipv6/addrconf.c
net/sctp/sysctl.c
* git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6: (43 commits)
security/tomoyo: Remove now unnecessary handling of security_sysctl.
security/tomoyo: Add a special case to handle accesses through the internal proc mount.
sysctl: Drop & in front of every proc_handler.
sysctl: Remove CTL_NONE and CTL_UNNUMBERED
sysctl: kill dead ctl_handler definitions.
sysctl: Remove the last of the generic binary sysctl support
sysctl net: Remove unused binary sysctl code
sysctl security/tomoyo: Don't look at ctl_name
sysctl arm: Remove binary sysctl support
sysctl x86: Remove dead binary sysctl support
sysctl sh: Remove dead binary sysctl support
sysctl powerpc: Remove dead binary sysctl support
sysctl ia64: Remove dead binary sysctl support
sysctl s390: Remove dead sysctl binary support
sysctl frv: Remove dead binary sysctl support
sysctl mips/lasat: Remove dead binary sysctl support
sysctl drivers: Remove dead binary sysctl support
sysctl crypto: Remove dead binary sysctl support
sysctl security/keys: Remove dead binary sysctl support
sysctl kernel: Remove binary sysctl logic
...
We used to return positive EAGAIN to indicate a retry action
is needed in dlm_begin_reco_handler(). Now we return negative
-EAGAIN to erase the confusion caused by this error code.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
By default, o2cb fences the box by calling emergency_restart(). While this
scheme works well in production, it comes in the way during testing as it
does not let the tester take stack/core dumps for analysis.
This patch allows user to dynamically change the fence method to panic() by:
# echo "panic" > /sys/kernel/config/cluster/<clustername>/fence_method
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
sparse check finds some endian problem and some other minor issues.
There is an obsolete function which should be removed.
So this patch resolve all these.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
