The current conversion from the legacy SysEx event to UMP SysEx packet
in the sequencer core has a couple of issues:
* The first packet trims the SysEx start byte (0xf0), hence it
contains only 5 bytes instead of 6. This isn't wrong, per
specification, but it's strange not to fill 6 bytes.
* When the SysEx end marker (0xf7) is placed at the first byte of the
next packet, it'll end up with an empty data just with the END
status. It can be rather folded into the previous packet with the
END status.
This patch tries to address those issues. The first packet may have 6
bytes even with the SysEx start, and an empty packet with the SysEx
end marker is omitted.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240726143455.3254-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a Function Block declares it being a legacy MIDI1 device, it has
to be only with a single UMP Group. Correct the attribute when a
device declares it wrongly.
Fixes: 37e0e14128 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240722140610.10845-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a device tries to update the FB name string even if its Endpoint
is declared as static, we should skip it, just already done for the FB
info update reply.
Fixes: 37e0e14128 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240722135929.8612-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the UMP Endpoint is configured with static blocks, the block
configuration will never change, hence the unused ports will be
unchanged as well. Creating sequencer ports for those unused ports
is simply useless, and it might be rather confusing for users.
The idea behind the inactive ports was for allowing connections
from/to ports that can become usable later, but this will never
happen for inactive groups in static blocks.
Let's change the sequencer UMP binding to skip those unused ports when
the UMP EP is with static blocks.
Fixes: 81fd444aa3 ("ALSA: seq: Bind UMP device")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240717083322.25892-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When suspended, the DMA channel may enter PAUSE state if dmaengine_pause()
is supported by DMA.
At this state, dmaengine_synchronize() should not be called, otherwise
the DMA channel can't be resumed successfully.
Fixes: e8343410dd ("ALSA: dmaengine: Synchronize dma channel after drop()")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/1721198693-27636-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MIDI2 Set Tempo message defines the tempo in 10ns unit for finer
accuracy, while MIDI1 was defined in 1us unit. For adapting this
different unit, introduce "tempo_base" field to snd_seq_queue_tempo
struct so that user-space can pass the proper tempo base unit.
The accepted value is limited, it must be either 0, 10 or 1000.
The protocol version is bumped to 1.0.4 along with this.
The access with the older protocol version ignores the tempo-base
value in ioctls and always treats as 1000.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20240705160344.6481-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Optimize the memory usage in struct snd_pcm_runtime - use boolean
value for the standard sync ID scheme.
Introduce snd_pcm_set_sync_per_card function to build synchronization
IDs.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240625172836.589380-3-perex@perex.cz
Until the commit e11f0f90a6 ("ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO
internal command"), there was a possibility to pass information
about the synchronized streams to the user space. The mentioned
commit removed blindly the appropriate code with an irrelevant comment.
The revert may be appropriate, but since this API was lost for several
years without any complains, it's time to improve it. The hardware
parameters may change the used stream clock source (e.g. USB hardware)
so move this synchronization ID to hw_params as read-only field.
It seems that pipewire can benefit from this API (disable adaptive
resampling for perfectly synchronized PCM streams) now.
Note that the contents of ID is not supposed to be used for direct
comparison with a specific byte sequence. The "empty" case is when
all bytes are zero (driver does not offer this information)
and all other cases must be only used for equal comparison among
PCM streams (including different sound cards) if they are using
identical hardware clock.
Cc: Takashi Sakamoto <takaswie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240625172836.589380-2-perex@perex.cz
A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays. There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmZ8WXYACgkQJNaLcl1U
h9AspQf/bpCUI0n5Ug9gVnIruIjAs7B5M1ctlkwTdKmNs1du3Qsd5/5Ucu1tqhSx
Y/yvB4VZTWOYLbgT2rjQgt9hEiBaCbrs3QFdL+Row0+qSrngydVbng2yKacMg1ii
IlqvhGvYZdODUL8SyoehlQXMN3OXOPzX2RVeAu9BVblXmeHYlNF8c/SfYvXJuto6
iJPYUV22+aOZsg+9kvnAb1KqlaZkPPPmLoKBVcFgoz+A3fVzzazMsDcBXGKLDFBX
OEtTjtGGb/facOqvaUhc/TS7Ug5Dk/cO9G8rErECwdV4vvFB2UCWkmL/bohcXax1
b9QJfMG08ucCWlKmZfbww1Oq8rX+sg==
=kPZz
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.10-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.10
A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays. There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.
The conversion of SPP to MIDI2 UMP called a wrong function, and the
secondary argument wasn't taken. As a result, MSB of SPP was always
zero. Fix to call the right function.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240626145141.16648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both snd_dmaengine_pcm_close() and
snd_dmaengine_pcm_close_release_chan() are almost identical except for
a call of dma_release_channel() in the latter. For code
simplification, unify them internally.
Just a code refactoring, and no functional changes.
Link: https://patch.msgid.link/20240625113356.2123-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When dmaengine supports pause function, in suspend state,
dmaengine_pause() is called instead of dmaengine_terminate_async(),
In end of playback stream, the runtime->state will go to
SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen
at this time, application will not resume playback stream, the
stream will be closed directly, the dmaengine_terminate_async()
will not be called before the dmaengine_synchronize(), which
violates the call sequence for dmaengine_synchronize().
This behavior also happens for capture streams, but there is no
SNDRV_PCM_STATE_DRAINING state for capture. So use
dmaengine_tx_status() to check the DMA status if the status is
DMA_PAUSED, then call dmaengine_terminate_async() to terminate
dmaengine before dmaengine_synchronize().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718851218-27803-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The conversion from the legacy event to MIDI2 UMP for RPN and NRPN
missed the setup of the channel number, resulting in always the
channel 0. Fix it.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240625095200.25745-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are lots of code checking NULL for kcontrol passed to
snd_ctl_remove() in the caller side. Let's make snd_ctl_remove()
accepting the NULL kcontrol instead a la free(), so that we can clean
up the caller side.
Link: https://lore.kernel.org/20240617100529.6667-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The values returned from Playback Channel Map and Capture Channel Map
controls may vary dynamically depending on the corresponding PCM
stream. Mark those as volatile to indicate the values are unstable
and not suitable for testing.
Note that we may change the driver to return -EINVAL, but this would
bring other side effects, such as "alsactl restore" would start
receiving unexpected errors. So we still keep returning 0 for those
invalid inputs.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-6-tiwai@suse.de
Although we have already a mechanism for sanity checks of input values
for control writes, it's not applied unless the kconfig
CONFIG_SND_CTL_INPUT_VALIDATION is set due to the performance reason.
Nevertheless, it still makes sense to apply the same check for user
elements despite of its cost, as that's the only way to filter out the
invalid values; the user controls are handled solely in ALSA core
code, and there is no corresponding driver, after all.
This patch adds the same input value validation for user control
elements at its put callback. The kselftest will be happier with this
change, as the incorrect values will be bailed out now with errors.
For other normal controls, the check is applied still only when
CONFIG_SND_CTL_INPUT_VALIDATION is set.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-4-tiwai@suse.de
So far the vmaster code has been tolerant about the input values and
accepts any values by correcting internally. But now our own selftest
starts complaining about this behavior, so let's be picky and change
the behavior to return -EINVAL for invalid input values instead.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/1d44be36-9bb9-4d82-8953-5ae2a4f09405@molgen.mpg.de
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/20240616073454.16512-2-tiwai@suse.de
Sometimes the stream may be stopped due to XRUN events, in which case
the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and
start the stream again.
In these cases, we must wait for the DMA channel to synchronize before
marking the stream as prepared for playback, as the DMA channel gets
stopped by drop() without any synchronization. Make sure the ALSA core
synchronizes the DMA channel by adding a sync_stop() hook.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240611-asoc_next-v3-1-fcfd84b12164@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from System Reset event to UMP was missing.
Add the entry for a conversion to a proper UMP System message.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531123718.13420-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At converting between the legacy event and UMP, the parameters for
MIDI Song Position Pointer are incorrectly stored. It should have
been LSB -> MSB order while it stored in MSB -> LSB order.
This patch corrects the ordering.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531075110.3250-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We fixed the incorrect UMP type for system messages in the recent
commit, but it missed one place in system_ev_to_ump_midi1().
Fix it now.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Fixes: c2bb79613f ("ALSA: seq: Fix incorrect UMP type for system messages")
Link: https://lore.kernel.org/r/20240530101044.17524-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When an inquiry of the current protocol via UMP Stream Configuration
message fails by some reason, we may leave the current protocol
undefined, which may lead to unexpected behavior. Better to assume a
valid protocol found in the protocol capability bits instead.
For a device that doesn't support the UMP v1.2 feature, it won't reach
to this code path, and USB MIDI GTB descriptor would be used for
determining the protocol, instead.
Link: https://lore.kernel.org/r/20240529164723.18309-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a UMP Stream Configuration message is received, the driver tries
to switch the protocol, but there was no sanity check of the protocol,
hence it can pass an invalid value. Add the check and bail out if a
wrong value is passed.
Fixes: a798076837 ("ALSA: ump: Add helper to change MIDI protocol")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529164723.18309-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current code clears the bank selection MSB/LSB after sending a
program change, but this can be wrong, as many apps may not send the
full bank selection with both MSB and LSB but sending only one.
Better to keep the previous bank set.
Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529083823.5778-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When converting a legacy system message to a UMP packet, it forgot to
modify the UMP type field but keeping the default type (either type 2
or 4). Correct to the right type for system messages.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529083800.5742-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current code to convert from a legacy sequencer event to UMP MIDI2
clears the bank selection at each time the program change is
submitted. This is confusing and may lead to incorrect bank values
tranmitted to the destination in the end.
Drop the line to clear the bank info and keep the provided values.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240527151852.29036-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a UMP packet is converted between MIDI1 and MIDI2 protocols, the
bank selection may be lost. The conversion from MIDI1 to MIDI2 needs
the encoding of the bank into UMP_MSG_STATUS_PROGRAM bits, while the
conversion from MIDI2 to MIDI1 needs the extraction from that
instead.
This patch implements the missing bank selection mechanism in those
conversions.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240527151852.29036-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The card-specific debugfs entries are removed at the last stage of
card free phase, and it's performed after synchronization of the
closes of all opened fds. This works fine for most cases, but it can
be potentially problematic for a hotplug device like USB-audio. Due
to the nature of snd_card_free_when_closed(), the card free isn't
called immediately after the driver removal for a hotplug device, but
it's left until the last fd is closed. It implies that the card
debugfs entries also remain. Meanwhile, when a new device is inserted
before the last close and the very same card slot is assigned, the
driver tries to create the card debugfs root again on the very same
path. This conflicts with the remaining entry, and results in the
kernel warning such as:
debugfs: Directory 'card0' with parent 'sound' already present!
with the missing debugfs entry afterwards.
For avoiding such conflicts, remove debugfs entries at the device
disconnection phase instead. The jack kctl debugfs entries get
removed in snd_jack_dev_disconnect() instead of each kctl
private_free.
Fixes: 2d670ea2bd ("ALSA: jack: implement software jack injection via debugfs")
Link: https://lore.kernel.org/r/20240524151256.32521-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of small fixes for 6.10-rc1. Most of changes are
various device-specific fixes and quirks, while there are a few small
changes in ALSA core timer and module / built-in fixes.
-----BEGIN PGP SIGNATURE-----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=VeU/
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.10-rc1. Most of changes are various
device-specific fixes and quirks, while there are a few small changes
in ALSA core timer and module / built-in fixes"
* tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 440/460 G11.
ALSA: core: Enable proc module when CONFIG_MODULES=y
ALSA: core: Fix NULL module pointer assignment at card init
ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string
ASoC: tas2781: Fix wrong loading calibrated data sequence
ASoC: tas2552: Add TX path for capturing AUDIO-OUT data
ALSA: usb-audio: Fix for sampling rates support for Mbox3
Documentation: sound: Fix trailing whitespaces
ALSA: timer: Set lower bound of start tick time
ASoC: codecs: ES8326: solve hp and button detect issue
ASoC: rt5645: mic-in detection threshold modification
ASoC: Intel: sof_sdw_rt_sdca_jack_common: Use name_prefix for `-sdca` detection
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
- Ensure seldom updated triggers have a brightness value before first update
- New Device Support
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
- New Functionality
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
- Fix-ups
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
- Bug Fixes
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending
-----BEGIN PGP SIGNATURE-----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=rF2l
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Ensure seldom updated triggers have a brightness value before first
update
New Device Support:
- Add support for Simatic IPC Device BX_59A to IPC LEDs Core
- Add support for Qualcomm PMI8950 PWM to LPG Core
New Functionality:
- Add a bunch of new LED function identifiers
- Add support for High Resolution Timers in LED Trigger Patten
Fix-ups:
- Shift out Audio Trigger to the Sound subsystem
- Convert suitable calls to devm_* managed resources
- Device Tree binding adaptions/conversions/creation
- Remove superfluous code/variables/attributes and simplify overall
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
Bug Fixes:
- Repair enabling Torch Mode from V4L2 on the second LED
- Ensure PWM is disabled when suspending"
* tag 'leds-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (28 commits)
leds: mt6370: Remove unused field 'reg_cfgs' from 'struct mt6370_priv'
leds: lp50xx: Remove unused field 'num_of_banked_leds' from 'struct lp50xx'
leds: lp50xx: Remove unused field 'bank_modules' from 'struct lp50xx_led'
leds: aat1290: Remove unused field 'torch_brightness' from 'struct aat1290_led'
leds: sun50i-a100: Use match_string() helper to simplify the code
leds: pwm: Disable PWM when going to suspend
leds: trigger: pattern: Add support for hrtimer
leds: mt6360: Fix the second LED can not enable torch mode by V4L2
dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
leds: qcom-lpg: Add support for PMI8950 PWM
leds: apu: Remove duplicate DMI lookup data
leds: trigger: netdev: Remove not needed call to led_set_brightness in deactivate
dt-bindings: leds: Add LED_FUNCTION_SPEED_* for link speed on LAN/WAN
dt-bindings: leds: Add LED_FUNCTION_MOBILE for mobile network
leds: simatic-ipc-leds-gpio: Add support for module BX-59A
dt-bindings: leds: qcom-lpg: Document PM6150L compatible
dt-bindings: leds: pca963x: Convert text bindings to YAML
leds: an30259a: Use devm_mutex_init() for mutex initialization
leds: mlxreg: Use devm_mutex_init() for mutex initialization
leds: nic78bx: Use devm API to cleanup module's resources
...
We used '#ifdef MODULE' for judging whether the system supports the
sound module or not, and /proc/asound/modules is created only when
'#ifdef MODULE' is true. The check is not really appropriate, though,
because the flag means only for the sound core and the drivers are
still allowed to be built as modules even if 'MODULE' is not set in
sound/core/init.c.
For fixing the inconsistency, replace those ifdefs with 'ifdef
CONFIG_MODULES'. One place for a NULL module check is rewritten with
IS_MODULE(CONFIG_SND) to be more intuitive. It can't be changed to
CONFIG_MODULES; otherwise it would hit a WARN_ON() incorrectly.
This is a slight behavior change; the modules proc entry appears now
no matter whether the sound core is built-in or not as long as modules
are enabled on the kernel in general. This can't be avoided due to
the nature of kernel builds.
Link: https://lore.kernel.org/r/20240520170349.2417900-1-xu.yang_2@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240522070442.17786-2-tiwai@suse.de
The commit 81033c6b58 ("ALSA: core: Warn on empty module")
introduced a WARN_ON() for a NULL module pointer passed at snd_card
object creation, and it also wraps the code around it with '#ifdef
MODULE'. This works in most cases, but the devils are always in
details. "MODULE" is defined when the target code (i.e. the sound
core) is built as a module; but this doesn't mean that the caller is
also built-in or not. Namely, when only the sound core is built-in
(CONFIG_SND=y) while the driver is a module (CONFIG_SND_USB_AUDIO=m),
the passed module pointer is ignored even if it's non-NULL, and
card->module remains as NULL. This would result in the missing module
reference up/down at the device open/close, leading to a race with the
code execution after the module removal.
For addressing the bug, move the assignment of card->module again out
of ifdef. The WARN_ON() is still wrapped with ifdef because the
module can be really NULL when all sound drivers are built-in.
Note that we keep 'ifdef MODULE' for WARN_ON(), otherwise it would
lead to a false-positive NULL module check. Admittedly it won't catch
perfectly, i.e. no check is performed when CONFIG_SND=y. But, it's no
real problem as it's only for debugging, and the condition is pretty
rare.
Fixes: 81033c6b58 ("ALSA: core: Warn on empty module")
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Closes: https://lore.kernel.org/r/20240520170349.2417900-1-xu.yang_2@nxp.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240522070442.17786-1-tiwai@suse.de
Currently ALSA timer doesn't have the lower limit of the start tick
time, and it allows a very small size, e.g. 1 tick with 1ns resolution
for hrtimer. Such a situation may lead to an unexpected RCU stall,
where the callback repeatedly queuing the expire update, as reported
by fuzzer.
This patch introduces a sanity check of the timer start tick time, so
that the system returns an error when a too small start size is set.
As of this patch, the lower limit is hard-coded to 100us, which is
small enough but can still work somehow.
Reported-by: syzbot+43120c2af6ca2938cc38@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/000000000000fa00a1061740ab6d@google.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240514182745.4015-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the recent code change, the conditional build with CONFIG_PM is
calling only snd_power_sync_ref(). As a dummy function is provided
for this function, we can get rid of CONFIG_PM gracefully now.
Link: https://lore.kernel.org/r/20240510125128.6058-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In snd_card_disconnect(), we set card->shutdown flag at the beginning,
call callbacks and do sync for card->power_ref_sleep waiters at the
end. The callback may delete a kctl element, and this can lead to a
deadlock when the device was in the suspended state. Namely:
* A process waits for the power up at snd_power_ref_and_wait() in
snd_ctl_info() or read/write() inside card->controls_rwsem.
* The system gets disconnected meanwhile, and the driver tries to
delete a kctl via snd_ctl_remove*(); it tries to take
card->controls_rwsem again, but this is already locked by the
above. Since the sleeper isn't woken up, this deadlocks.
An easy fix is to wake up sleepers before processing the driver
disconnect callbacks but right after setting the card->shutdown flag.
Then all sleepers will abort immediately, and the code flows again.
So, basically this patch moves the wait_event() call at the right
timing. While we're at it, just to be sure, call wait_event_all()
instead of wait_event(), although we don't use exclusive events on
this queue for now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218816
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240510101424.6279-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-2-tiwai@suse.de
Some data for testing is immutable. In the case, the const qualifier is
available for any loader to place it to read-only segment.
Fixes: 3e39acf56e ("ALSA: core: Add sound core KUnit test")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240425233653.218434-1-o-takashi@sakamocchi.jp>
Don't populate the read-only array buf_samples on the stack at
run time, instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240425160754.114716-1-colin.i.king@gmail.com>
Instead of reiterating the list, use list_for_each_entry_safe()
that allows to continue without starting over.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Message-ID: <20240424145020.1057216-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although the purpose of dummy seq client is a direct pass-through,
it's sometimes helpful for debugging if it can convert to a certain
UMP MIDI version. This patch adds an option to specify the UMP event
conversion. As default, it skips the conversion and does
passthrough, while user can pass ump=1 or ump=2 to enforce the
conversion to UMP MIDI1 or MIDI2 format.
Message-ID: <20240419101105.15571-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
