- support for idmapped mounts in CephFS (Christian Brauner, Alexander
Mikhalitsyn). The series was originally developed by Christian and
later picked up and brought over the finish line by Alexander, who
also contributed an enabler on the MDS side (separate owner_{u,g}id
fields on the wire). The required exports for mnt_idmap_{get,put}()
in VFS have been acked by Christian and received no objection from
Christoph.
- a churny change in CephFS logging to include cluster and client
identifiers in log and debug messages (Xiubo Li). This would help
in scenarios with dozens of CephFS mounts on the same node which are
getting increasingly common, especially in the Kubernetes world.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmVNDyMTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHziy6xCACmUikhgo+pZDO7oQS7HChdZFz5Q2Jb
5K9K7sJr7Zb2gFKLAV93cyFrz0JRljmgZuA3DmDTH1omrkrVAJfHJ6Md1UFG3W7o
LaowP3kECsykOiz+YtVU2957sfoFqds/q6KCXdp1Pc8WfNnL1vysCim6EGYtCqUm
c6vv0zkvEDQp+3kjTN01LHzHFZdHg8+STNM4BMiB0sO/NqbADnaQBEtDpYrgzwh7
YPwVIKcXutUmAKlb7vjUF9ptSICYkGV7B+loPS4BDva1I6dT42xqLQOu89tTKU0D
DiQAfE2oRgU+fl+mMooFJNSqD25Q6IkXrPs0HuiSHS4wtLGqYZAwwfHB
=F9o1
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
- support for idmapped mounts in CephFS (Christian Brauner, Alexander
Mikhalitsyn).
The series was originally developed by Christian and later picked up
and brought over the finish line by Alexander, who also contributed
an enabler on the MDS side (separate owner_{u,g}id fields on the
wire).
The required exports for mnt_idmap_{get,put}() in VFS have been acked
by Christian and received no objection from Christoph.
- a churny change in CephFS logging to include cluster and client
identifiers in log and debug messages (Xiubo Li).
This would help in scenarios with dozens of CephFS mounts on the same
node which are getting increasingly common, especially in the
Kubernetes world.
* tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client:
ceph: allow idmapped mounts
ceph: allow idmapped atomic_open inode op
ceph: allow idmapped set_acl inode op
ceph: allow idmapped setattr inode op
ceph: pass idmap to __ceph_setattr
ceph: allow idmapped permission inode op
ceph: allow idmapped getattr inode op
ceph: pass an idmapping to mknod/symlink/mkdir
ceph: add enable_unsafe_idmap module parameter
ceph: handle idmapped mounts in create_request_message()
ceph: stash idmapping in mdsc request
fs: export mnt_idmap_get/mnt_idmap_put
libceph, ceph: move mdsmap.h to fs/ceph
ceph: print cluster fsid and client global_id in all debug logs
ceph: rename _to_client() to _to_fs_client()
ceph: pass the mdsc to several helpers
libceph: add doutc and *_client debug macros support
Just pass down the mount's idmapping to __ceph_setattr,
because we will need it later.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Multiple CephFS mounts on a host is increasingly common so
disambiguating messages like this is necessary and will make it easier
to debug issues.
At the same this will improve the debug logs to make them easier to
troubleshooting issues, such as print the ino# instead only printing
the memory addresses of the corresponding inodes and print the dentry
names instead of the corresponding memory addresses for the dentry,etc.
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We need to covert the inode to ceph_client in the following commit,
and will add one new helper for that, here we rename the old helper
to _fs_client().
Link: https://tracker.ceph.com/issues/61590
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This update adds support for configuring the crypto data unit size (i.e.
the granularity of file contents encryption) to be less than the
filesystem block size. This can allow users to use inline encryption
hardware in some cases when it wouldn't otherwise be possible.
In addition, there are two commits that are prerequisites for the
extent-based encryption support that the btrfs folks are working on.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZT8acBQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK+czAQDkStgX1ICJQANnxwbrg/SUVdZjPuFH
sJw3sUVpBR81TwEA/SyWh3YzVNZdpE7PWNrCknrC+qnO8hd9QBEjnQfwIQc=
=t44a
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt updates from Eric Biggers:
"This update adds support for configuring the crypto data unit size
(i.e. the granularity of file contents encryption) to be less than the
filesystem block size. This can allow users to use inline encryption
hardware in some cases when it wouldn't otherwise be possible.
In addition, there are two commits that are prerequisites for the
extent-based encryption support that the btrfs folks are working on"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: track master key presence separately from secret
fscrypt: rename fscrypt_info => fscrypt_inode_info
fscrypt: support crypto data unit size less than filesystem block size
fscrypt: replace get_ino_and_lblk_bits with just has_32bit_inodes
fscrypt: compute max_lblk_bits from s_maxbytes and block size
fscrypt: make the bounce page pool opt-in instead of opt-out
fscrypt: make it clearer that key_prefix is deprecated
Before returning, function ceph_fname_to_usr() does a final IS_ERR() check
in 'dir':
if ((dir != fname->dir) && !IS_ERR(dir)) {...}
This check is unnecessary because, if the 'dir' variable has changed to
something other than 'fname->dir' (it's initial value), that error check has
been performed already and, if there was indeed an error, it would have
been returned immediately.
Besides, this useless IS_ERR() is also confusing static analysis tools.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202309282202.xZxGdvS3-lkp@intel.com/
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Replace FS_CFLG_OWN_PAGES with a bit flag 'needs_bounce_pages' which has
the opposite meaning. I.e., filesystems now opt into the bounce page
pool instead of opt out. Make fscrypt_alloc_bounce_page() check that
the bounce page pool has been initialized.
I believe the opt-in makes more sense, since nothing else in
fscrypt_operations is opt-out, and these days filesystems can choose to
use blk-crypto which doesn't need the fscrypt bounce page pool. Also, I
happen to be planning to add two more flags, and I wanted to fix the
"FS_CFLG_" name anyway as it wasn't prefixed with "FSCRYPT_".
Link: https://lore.kernel.org/r/20230925055451.59499-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Function ceph_get_inode() never returns NULL; instead it returns an
ERR_PTR() if something fails. Thus, the check for NULL in parse_longname()
is useless and can be dropped. Instead, move there the debug code that
does the error checking so that it's only executed if ceph_get_inode() is
called.
Fixes: dd66df0053 ("ceph: add support for encrypted snapshot names")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since filenames in encrypted directories are encrypted and shown as
a base64-encoded string when the directory is locked, make snapshot
names show a similar behaviour.
When creating a snapshot, .snap directories for every subdirectory will
show the snapshot name in the "long format":
# mkdir .snap/my-snap
# ls my-dir/.snap/
_my-snap_1099511627782
Encrypted snapshots will need to be able to handle these by
encrypting/decrypting only the snapshot part of the string ('my-snap').
Also, since the MDS prevents snapshot names to be bigger than 240
characters it is necessary to adapt CEPH_NOHASH_NAME_MAX to accommodate
this extra limitation.
[ idryomov: drop const on !CONFIG_FS_ENCRYPTION branch too ]
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When setting a directory's crypt context, ceph_dir_clear_complete()
needs to be called otherwise if it was complete before, any existing
(old) dentry will still be valid.
This patch adds a wrapper around __fscrypt_prepare_readdir() which will
ensure a directory is marked as non-complete if key status changes.
[ xiubli: revise commit title per Milind ]
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
To make it simpler to decrypt names in a readdir reply (i.e. before
we have a dentry), add a new ceph_encode_encrypted_fname()-like helper
that takes a qstr pointer instead of a dentry pointer.
Once we've decrypted the names in a readdir reply, we no longer need the
crypttext, so overwrite them in ceph_mds_reply_dir_entry with the
unencrypted names. Then in both ceph_readdir_prepopulate() and
ceph_readdir() we will use the dencrypted name directly.
[ jlayton: convert some BUG_ONs into error returns ]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Define a new ceph_fname struct that we can use to carry information
about encrypted dentry names. Add helpers for working with these
objects, including ceph_fname_to_usr which formats an encrypted filename
for userland presentation.
[ xiubli: fix resulting name length check -- neither name_len nor
ctext_len should exceed NAME_MAX ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Allow ceph_mdsc_build_path to encrypt and base64 encode the filename
when the parent is encrypted and we're sending the path to the MDS. In
a similar fashion, encode encrypted dentry names if including a dentry
release in a request.
In most cases, we just encrypt the filenames and base64 encode them,
but when the name is longer than CEPH_NOHASH_NAME_MAX, we use a similar
scheme to fscrypt proper, and hash the remaning bits with sha256.
When doing this, we then send along the full crypttext of the name in
the new alternate_name field of the MClientRequest. The MDS can then
send that along in readdir responses and traces.
[ idryomov: drop duplicate include reported by Abaci Robot ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The base64url encoding used by fscrypt includes the '_' character, which
may cause problems in snapshot names (if the name starts with '_').
Thus, use the base64 encoding defined for IMAP mailbox names (RFC 3501),
which uses '+' and ',' instead of '-' and '_'.
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add support for the test_dummy_encryption mount option. This allows us
to test the encrypted codepaths in ceph without having to manually set
keys, etc.
[ lhenriques: fix potential fsc->fsc_dummy_enc_policy memory leak in
ceph_real_mount() ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most fscrypt-enabled filesystems store the crypto context in an xattr,
but that's problematic for ceph as xatts are governed by the XATTR cap,
but we really want the crypto context as part of the AUTH cap.
Because of this, the MDS has added two new inode metadata fields:
fscrypt_auth and fscrypt_file. The former is used to hold the crypto
context, and the latter is used to track the real file size.
Parse new fscrypt_auth and fscrypt_file fields in inode traces. For now,
we don't use fscrypt_file, but fscrypt_auth is used to hold the fscrypt
context.
Allow the client to use a setattr request for setting the fscrypt_auth
field. Since this is not a standard setattr request from the VFS, we add
a new field to __ceph_setattr that carries ceph-specific inode attrs.
Have the set_context op do a setattr that sets the fscrypt_auth value,
and get_context just return the contents of that field (since it should
always be available).
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph. This
is mostly a matter of moving files around. However, a few key pieces
of the interface change as well:
- ceph_client becomes ceph_fs_client and ceph_client, where the latter
captures the mon and osd clients, and the fs_client gets the mds client
and file system specific pieces.
- Mount option parsing and debugfs setup is correspondingly broken into
two pieces.
- The mon client gets a generic handler callback for otherwise unknown
messages (mds map, in this case).
- The basic supported/required feature bits can be expanded (and are by
ceph_fs_client).
No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.
Signed-off-by: Sage Weil <sage@newdream.net>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
