Commit Graph

257 Commits

Author SHA1 Message Date
Paul Mundt
7693465d81 sh: Kill off superfluous arch/sh/drivers/pci/Kconfig.
Now that this contains a grand total of 1 Kconfig option, it's hardly
worth keeping split out. Roll CONFIG_PCI back in to the top-level
architecture Kconfig, along with the other bus types.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 10:36:55 +09:00
Paul Mundt
01be5d63fd sh: Revamp PCI DMA coherence Kconfig bits.
Leaving this configurable caused more trouble than it was ever worth, so
just make it explicit. Boards that are verified one way or the other can
fix up their selects accordingly. We presently default to non-coherent
for most platforms.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27 10:35:02 +09:00
Paul Mundt
73c926bee0 sh: Convert to asm-generic/dma-mapping-common.h
This converts the old DMA mapping support to the new generic
dma-mapping-common.h abstraction.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-20 12:55:56 +09:00
Paul Mundt
cae19b5902 sh: Kill off legacy UBC wakeup cruft.
This code was added for some ancient SH-4 solution engines with peculiar
boot ROMs that did silly things to the UBC MSTP bits. None of these have
been in the wild for years, and these days the clock framework wraps up
the MSTP bits, meaning that the UBC code is one of the few interfaces
that is stomping MSTP bits underneath the clock framework. At this point
the risks far outweigh any benefit this code provided, so just kill it
off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 18:20:42 +09:00
Paul Mundt
78aed4a63a Merge branch 'sh/stable-updates'
Conflicts:
	arch/sh/Kconfig
2009-10-16 18:16:02 +09:00
Paul Mundt
f875295c4b sh: Kill off stray HAVE_FTRACE_SYSCALLS reference.
This seems to have popped back in via some merge damage. Kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 18:14:19 +09:00
Paul Mundt
e4b053d96a sh: ftrace: Make code modification NMI safe.
This cribs the x86 implementation of ftrace_nmi_enter() and friends to
make ftrace_modify_code() NMI safe, particularly on SMP configurations.

For additional notes on the problems involved, see the comment below
ftrace_call_replace().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-13 16:52:50 +09:00
Ingo Molnar
cdd6c482c9 perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:28:04 +02:00
Paul Mundt
a74f7e0410 sh: Wire up HAVE_SYSCALL_TRACEPOINTS.
This is necessary to get ftrace syscall tracing working again.. a fairly
trivial and mechanical change. The one benefit is that this can also be
enabled on sh64, despite not having its own ftrace port.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-16 14:30:34 +09:00
Pawel Moll
d724a9c9d5 sh: Allow for kernel command line concatenation.
So far kernel command line arguments could be passed in by a bootloader
or defined as CONFIG_CMDLINE, which completely overwriting the first one.

This change allows a developer to declare selected kernel parameters in
a kernel configuration (eg. project-specific defconfig), retaining
possibility of passing others by a bootloader.

The obvious examples of the first type are MTD partition or
bigphysarea-like region definitions, while "debug" option or network
configuration should be given by a bootloader or a JTAG boot script.

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24 16:25:38 +09:00
Paul Mundt
c3144fc46f Merge branches 'sh/hwblk' and 'sh/pm-runtime' 2009-08-23 18:04:07 +09:00
Magnus Damm
ac2c596b57 sh: let ARCH_SHMOBILE select PM and PM_RUNTIME
With the Runtime PM driver changes in place, we must have
Runtime PM support in place. Otherwise there is no way to
enable clocks to the Runtime PM enabled hardware blocks.
This patch makes Runtime PM mandatory on SuperH Mobile.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-23 18:03:20 +09:00
Yoshihiro Shimoda
c01f0f1a4a sh: Add initial support for SH7757 CPU subtype
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21 17:25:47 +09:00
Paul Mundt
07e88e1bfc sh: bzip2/lzma zImage support.
This plugs in bzip2 and lzma support for zImages.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 13:21:19 -04:00
Paul Mundt
df8ce2595f sh: Tidy up gzip-based zImage decompression.
This brings the zImage handling in to the current century, in preparation
for handling the other compression types.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-12 01:37:30 +09:00
Paul Mundt
f686d8c11c Merge branches 'sh/ftrace' and 'sh/stable-updates' 2009-07-11 10:08:33 +09:00
Matt Fleming
327933f5d6 sh: Function graph tracer support
Add both dynamic and static function graph tracer support for sh.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11 10:08:01 +09:00
Paul Mundt
7119888df1 Merge branches 'sh/ftrace' and 'sh/cachetlb' 2009-07-06 20:19:28 +09:00
Matt Fleming
c652d780c9 sh: Add ftrace syscall tracing support
Now that I've added TIF_SYSCALL_FTRACE the thread flags do not fit into
a single byte any more. Code testing them now needs to be aware of the
upper and lower bytes.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-06 20:16:33 +09:00
Matt Fleming
c1340c053b sh: Define HAVE_FUNCTION_TRACE_MCOUNT_TEST
Enable HAVE_FUNCTION_TRACE_MCOUNT_TEST and test the value of
function_trace_stop from our assembly code as opposed to using the
generic C function. This should optimise our mcount/ftrace code path.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-06 19:53:53 +09:00
Matt Fleming
c601a51af1 sh: Use bootmem ontop of lmb
Rework the bootmem allocator to use the lmb framework.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-03 16:16:54 +09:00
Paul Mundt
bb38c222e0 sh: Fix up HAVE_PERF_COUNTERS typo.
That's HAVE_PERF_COUNTERS not HAVE_PERF_COUNTER. This was right
initially but I seem to have screwed it up while re-typing it out
by hand on another machine when I checked it in. Hmph.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-24 01:41:05 +09:00
Paul Mundt
2eb2a43682 sh: SH7786 SMP support.
SH7786 is roughly identical to SH-X3 proto SMP, though there are only 2
CPUs. This just wraps in to the existing SH-X3 SMP code with some minor
changes for SH7786, including wiring up the IPIs properly, enabling
IRQ_PER_CPU, and so forth.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-23 17:30:17 +09:00
Paul Mundt
2e046b9487 sh: Provide cpu_idle_wait() to fix up cpuidle/SMP build.
Crib the x86 cpu_idle_wait() implementation and shove it in with the
idle code, subsequently enabling ARCH_HAS_CPU_IDLE_WAIT.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-23 17:30:17 +09:00
Paul Mundt
3d3638da49 Merge branches 'sh/pci-express-integration', 'sh/rsk-updates', 'sh/platform-updates' and 'sh/perf_counter' 2009-06-17 16:37:26 +09:00
Paul Mundt
9c93e59697 sh: Generic HAVE_PERF_COUNTER support.
This enables support for the generic software-based perf counters.

Hardware counter support could be added in the future, but the lack
of a performance counter IRQ makes this rather dubious.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17 16:34:45 +09:00
Paul Mundt
f01789c688 sh: Use generic atomic64_t implementation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17 10:43:13 +09:00
Paul Mundt
3767f3f1ee sh: Convert sh64 to use the generic checksum code.
This plugs in GENERIC_CSUM support on sh64, and kills off all of the old
references.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-15 00:00:42 +09:00
Paul Mundt
54ff328b46 sh: Tie sparseirq in to Kconfig.
Now that the dependent patches are merged, we are ready to enable
sparseirq support. This simply adds the Kconfig option, and then converts
from the _cpu to the _node allocation routines to follow the upstream
sparseirq API changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 10:33:09 +03:00
Magnus Damm
46e9371c0e sh: sh7722 clock framework rewrite
This patch rewrites the sh7722 clock framework code.
The new code makes use of the recently merged div4,
div6 and mstp32 helper code. Both extal and dll are
supported as input clocks to the pll.

While at it, now when all SuperH Mobile processors
are converted, fix CONFIG_SH_CLK_CPG_LEGACY to depend
on CONFIG_ARCH_SHMOBILE.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:15:15 +03:00
Magnus Damm
4ed3739484 sh: sh7366 clock framework rewrite
This patch rewrites the sh7366 clock framework code.
The new code makes use of the recently merged div4,
div6 and mstp32 helper code. Both extal and dll are
supported as input clocks to the pll.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:15:07 +03:00
Magnus Damm
bc49b6eaac sh: sh7343 clock framework rewrite
This patch rewrites the sh7343 clock framework code.
The new code makes use of the recently merged div4,
div6 and mstp32 helper code. Both extal and dll are
supported as input clocks to the pll.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:14:34 +03:00
Magnus Damm
b621370a35 sh: sh7724 clock framework rewrite V3
This patch contains V3 of the sh7724 clock framework
rewrite. The new code makes use of the recently merged
div4, div6 and mstp32 helper code. Both extal and fll are
supported as input clocks to the pll. The div6 clocks are
fed through a divide-by-3 block.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:14:28 +03:00
Magnus Damm
c521dc0203 sh: sh7723 clock framework rewrite V2
This patch contains V2 of the sh7723 clock framework
rewrite. The new code makes use of the recently merged
div4, div6 and mstp32 helper code. Both extal and dll
are supported as input clocks to the pll.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11 09:13:36 +03:00
Kuninori Morimoto
4778541470 sh: fix CONFIG_SH_PCLK_FREQ bug for sh7724
CONFIG_SH_PCLK_FREQ=33333333 is correct for sh7724.
sh7724 master clock is 33333333, but peripheral is 41666666.
This bug came to light because sh-sci driver had changed clk
from "module_clk" to "peripheral_clk"

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02 12:08:52 +09:00
Paul Mundt
0bf8513ed0 sh: Tidy up SH-4A boot_cpu_data.flags probing.
This tidies up the boot_cpu_data.flags probing on SH-4A. All of them have
a few things in common, which we can blindly set, rather than having each
subtype have to set the same flags. We can also make assumptions about
cache ways and the validity of PTEA, so this also kills off CPU_HAS_PTEA
as a config option. There was also a bug in the FPU probing, which is now
tidied up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01 19:50:08 +09:00
Paul Mundt
36aa1e32f4 sh: clkfwk: Make clock-cpg usable for non-legacy platforms.
This adds a new SH_CLK_CPG for parts that have CPG support.
SH_CLK_CPG_LEGACY is made to depend on this, and still needs to be set
for platforms that want clock-cpg to register the legacy clocks. With
this new config item in place, it is now possible to start layering more
generic CPG code in place while other platforms transition off of the
legacy clocks.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22 14:00:34 +09:00
Paul Mundt
a77b5ac0ea sh: clkfwk: Update SH7785 for refactored clock framework.
This updates the SH7785 CPU code as well as the SH7785LCR board support
code for making use of the newly refactored clock framework. Support for
the legacy CPG clocks is dropped at this point, with the extal frequency
fed in from the board code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13 17:55:00 +09:00
Paul Mundt
253b0887b3 sh: clkfwk: Rework legacy CPG clock handling.
This moves out the old legacy CPG clocks to their own file, and converts
over the existing users. With these clocks going away and each CPU
dealing with them on their own, CPUs can gradually move over to the new
interface.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13 17:38:11 +09:00
Paul Mundt
8be5f1a68f sh: Kill off the remnants of the old timer code.
Now with all of the TMU users moved over to the new TMU driver, and the
old TMU driver killed off, the left-over infrastructure can go along
with it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 19:53:55 +09:00
Magnus Damm
f19900b2e6 sh: remove old TMU driver
This patch removes the old TMU driver (CONFIG_SH_TMU/timer-tmu.c)

As replacement, select the sh_tmu driver with CONFIG_SH_TIMER_TMU
and configure timer channel using platform data.

If multiple TMU channels are enabled using platform data, use the
earlytimer parameter on the kernel command line to select channel.
For instance, use "earlytimer=sh_tmu.0" to select the first channel.

To verify which timer is being used, look at printouts or the timer
irq count in /proc/interrupts.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 19:53:14 +09:00
Magnus Damm
2b23a8826a sh: CMT platform data for sh7720/sh7721
This patch adds CMT platform data for sh7720 and sh7721.
All 5 32-bit CMT channels unfortunately share a single IRQ.
Both clockevent and clocksource support is enabled.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-12 19:53:09 +09:00
Paul Mundt
b412a49af9 sh: Consolidate the boot link and entry offset definitions.
Consolidate these in a single place in the Kconfig menus. At the same
time, disable their interactivity and set them according to the board
config defaults.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 01:23:25 +09:00
Paul Mundt
a2e76c80d9 sh: Provide a tighter BOOT_LINK_OFFSET definition for the Cayman board.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-10 00:54:39 +09:00
Paul Mundt
6eac1af011 sh: Always select RTC_LIB, not just for SUPERH32.
The RTC_LIB helpers are used in arch/sh/kernel/time.c, which was
previously only the case for the 32-bit variant. Now that this has
become the common implementation, move the RTC_LIB select to reflect
that. Fixes up the sh64 build.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08 19:48:47 +09:00
Paul Mundt
6d134b9e8d sh: Wire up GENERIC_CMOS_UPDATE for the platforms that need it.
Now that everything has converted over to generic timekeeping, we need an
alternate method for keeping the RTC updated for those platforms that are
still using the rtc_sh_get/set_time pairs, presently limited to SH-03 and
the Dreamcast. This wires up the GENERIC_CMOS_UPDATE hooks for those to
maintain the same behaviour.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08 16:36:13 +09:00
Paul Mundt
add47067a8 sh: Finish the sh64 migration off of ARCH_USES_GETTIMEOFFSET.
This adds sh_tmu support to the SH-5 subtypes, which subsequently allows
us to kill off time_64.c and use the now generic time_32.c. As a bonus,
SH-5 now supports highres timers and tickless for the first time.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08 16:12:17 +09:00
Paul Mundt
4fa48e1774 sh: Enable new TMU driver support for all SH-3 and SH-4 CPUs.
The TMU block is supported on all SH-3 and SH-4 subtypes, so just select
it there, rather than conditionalizing it per subtype.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08 15:28:15 +09:00
Magnus Damm
e367592cc9 sh: TMU platform data for sh7785
This patch adds TMU platform data for sh7785. Both clockevent
and clocksource support is enabled.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-08 11:40:09 +09:00
Paul Mundt
ae318a148e sh: sh64 still needs ARCH_USES_GETTIMEOFFSET temporarily.
sh64 is still using this, so re-enable it temporarily while SH-5 gets
converted to use the generic code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-07 17:55:09 +09:00