The spec requires us in various places to keep track of the connections
associated with each session.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Changes:
- make sure session memory reservation is released on failure
path.
- use min_t()/min() for more compact code in several places.
- break alloc_init_session into smaller pieces.
- miscellaneous other cleanup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Instead of creating the new rpc client from a regular server thread,
set a flag, kick off a null call, and allow the null call to do the work
of setting up the client on the callback workqueue.
Use a spinlock to ensure the callback work gets a consistent view of the
callback parameters.
This allows, for example, changing the callback from contexts where
sleeping is not allowed. I hope it will also keep the locking simple as
we add more session and trunking features, by serializing most of the
callback-specific work.
This also closes a small race where the the new cb_ident could be used
with an old connection (or vice-versa).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This will eventually allow us, for example, to kick off null callback
from contexts where we can't sleep.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Make the recall callback code more generic, so that other callbacks
will be able to use it too.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Now that we have both nfsd4_callback and nfsd4_cb_conn structures, I get
confused if variables of both types are always named cb....
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The existing code adjusted it based on the worst case scenario for the returned
bitmap and the best case scenario for the supported attrs attribute.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[bfields@redhat.com: removed likely/unlikely's]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are two calls that operate on ip_map_cache and are
directly called from the nfsd code. Other places will be
handled in a different way.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note with "first" always 0, and "lastflags" initially 0, we always dump
a spurious set of 0 flags at the start, among other problems.
Fix. And attempt to make the code a little more obvious.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The git://linux-nfs.org/~bfields/linux.git nfsd-next branch doesn't
compile when nfsd is a module with the following error:
ERROR: "get_task_comm" [fs/nfsd/nfsd.ko] undefined!
Replace the get_task_comm call with direct comm access, which is
safe for current.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add CONFIG_NFSD_DEPRECATED, default to y.
Only include deprecated interface if this is defined.
This allows distros to remove this interface before the official
removal, and allows developers to test without it.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The syscall interface is has been replaced by a more flexible
interface since 2.6.0. It is time to work towards discarding
the old interface.
So add a entry in feature-removal-schedule.txt and print a warning
when the interface is used.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The idmap code manages request deferal by waiting for a reply from
userspace rather than putting the NFS request on a queue to be retried
from the start.
Now that the common deferal code does this there is no need for the
special code in idmap.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that a slight delay in getting a reply to an upcall doesn't
require deferring of requests, request deferral for all NFSv4
requests - the concept doesn't really fit with the v4 model.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The NFSv4 client's callback server calls svc_gss_principal(), which
is defined in the auth_rpcgss.ko
The NFSv4 server has the same dependency, and in addition calls
svcauth_gss_flavor(), gss_mech_get_by_pseudoflavor(),
gss_pseudoflavor_to_service() and gss_mech_put() from the same module.
The module auth_rpcgss itself has no dependencies aside from sunrpc,
so we only need to select RPCSEC_GSS.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This protects us from confusion when the wallclock time changes.
We convert to and from wallclock when setting or reading expiry
times.
Also use seconds since boot for last_clost time.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rather can duplicating this idiom twice, put it in an inline function.
This reduces the usage of 'expiry_time' out side the sunrpc/cache.c
code and thus the impact of a change that is about to be made to that
field.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux:
nfsd: fix NULL dereference in nfsd_statfs()
nfsd4: fix downgrade/lock logic
nfsd4: typo fix in find_any_file
nfsd4: bad BUG() in preprocess_stateid_op
The commit ebabe9a900
pass a struct path to vfs_statfs
introduced the struct path initialization, and this seems to trigger
an Oops on my machine.
fh_dentry field may be NULL and set later in fh_verify(), thus the
initialization of path must be after fh_verify().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we already had a RW open for a file, and get a readonly open, we were
piggybacking on the existing RW open. That's inconsistent with the
downgrade logic which blows away the RW open assuming you'll still have
a readonly open.
Also, make sure there is a readonly or writeonly open available for
locking, again to prevent bad behavior in downgrade cases when any RW
open may be lost.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's OK for this function to return without setting filp--we do it in
the special-stateid case.
And there's a legitimate case where we can hit this, since we do permit
reads on write-only stateid's.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Fix an Oops in the NFSv4 atomic open code
NFS: Fix the selection of security flavours in Kconfig
NFS: fix the return value of nfs_file_fsync()
rpcrdma: Fix SQ size calculation when memreg is FRMR
xprtrdma: Do not truncate iova_start values in frmr registrations.
nfs: Remove redundant NULL check upon kfree()
nfs: Add "lookupcache" to displayed mount options
NFS: allow close-to-open cache semantics to apply to root of NFS filesystem
SUNRPC: fix NFS client over TCP hangs due to packet loss (Bug 16494)
Randy Dunlap reports:
ERROR: "svc_gss_principal" [fs/nfs/nfs.ko] undefined!
because in fs/nfs/Kconfig, NFS_V4 selects RPCSEC_GSS_KRB5
and/or in fs/nfsd/Kconfig, NFSD_V4 selects RPCSEC_GSS_KRB5.
RPCSEC_GSS_KRB5 does 5 selects, but none of these is enforced/followed
by the fs/nfs[d]/Kconfig configs:
select SUNRPC_GSS
select CRYPTO
select CRYPTO_MD5
select CRYPTO_DES
select CRYPTO_CBC
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-linus' of git://git.infradead.org/users/eparis/notify: (132 commits)
fanotify: use both marks when possible
fsnotify: pass both the vfsmount mark and inode mark
fsnotify: walk the inode and vfsmount lists simultaneously
fsnotify: rework ignored mark flushing
fsnotify: remove global fsnotify groups lists
fsnotify: remove group->mask
fsnotify: remove the global masks
fsnotify: cleanup should_send_event
fanotify: use the mark in handler functions
audit: use the mark in handler functions
dnotify: use the mark in handler functions
inotify: use the mark in handler functions
fsnotify: send fsnotify_mark to groups in event handling functions
fsnotify: Exchange list heads instead of moving elements
fsnotify: srcu to protect read side of inode and vfsmount locks
fsnotify: use an explicit flag to indicate fsnotify_destroy_mark has been called
fsnotify: use _rcu functions for mark list traversal
fsnotify: place marks on object in order of group memory address
vfs/fsnotify: fsnotify_close can delay the final work in fput
fsnotify: store struct file not struct path
...
Fix up trivial delete/modify conflict in fs/notify/inotify/inotify.c.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
We'll need the path to implement the flags field for statvfs support.
We do have it available in all callers except:
- ecryptfs_statfs. This one doesn't actually need vfs_statfs but just
needs to do a caller to the lower filesystem statfs method.
- sys_ustat. Add a non-exported statfs_by_dentry helper for it which
doesn't won't be able to fill out the flags field later on.
In addition rename the helpers for statfs vs fstatfs to do_*statfs instead
of the misleading vfs prefix.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux: (34 commits)
nfsd4: fix file open accounting for RDWR opens
nfsd: don't allow setting maxblksize after svc created
nfsd: initialize nfsd versions before creating svc
net: sunrpc: removed duplicated #include
nfsd41: Fix a crash when a callback is retried
nfsd: fix startup/shutdown order bug
nfsd: minor nfsd read api cleanup
gcc-4.6: nfsd: fix initialized but not read warnings
nfsd4: share file descriptors between stateid's
nfsd4: fix openmode checking on IO using lock stateid
nfsd4: miscellaneous process_open2 cleanup
nfsd4: don't pretend to support write delegations
nfsd: bypass readahead cache when have struct file
nfsd: minor nfsd_svc() cleanup
nfsd: move more into nfsd_startup()
nfsd: just keep single lockd reference for nfsd
nfsd: clean up nfsd_create_serv error handling
nfsd: fix error handling in __write_ports_addxprt
nfsd: fix error handling when starting nfsd with rpcbind down
nfsd4: fix v4 state shutdown error paths
...
Commit f9d7562fdb "nfsd4: share file
descriptors between stateid's" didn't correctly account for O_RDWR opens.
Symptoms include leaked files, resulting in failures to unmount and/or
warnings about orphaned inodes on reboot.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's harmless to set this after the server is created, but also
ineffective, since the value is only used at the time of
svc_create_pooled(). So fail the attempt, in keeping with the pattern
set by write_versions, write_{lease,grace}time and write_recoverydir.
(This could break userspace that tried to write to nfsd/max_block_size
between setting up sockets and starting the server. However, such code
wouldn't have worked anyway, and I don't know of any examples--rpc.nfsd
in nfs-utils, probably the only user of the interface, doesn't do that.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 59db4a0c10 "nfsd: move more into
nfsd_startup()" inadvertently moved nfsd_versions after
nfsd_create_svc(). On older distributions using an rpc.nfsd that does
not explicitly set the list of nfsd versions, this results in
svc-create_pooled() being called with an empty versions array. The
resulting incomplete initialization leads to a NULL dereference in
svc_process_common() the first time a client accesses the server.
Move nfsd_reset_versions() back before the svc_create_pooled(); this
time, put it closer to the svc_create_pooled() call, to make this
mistake more difficult in the future.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If a callback is retried at nfsd4_cb_recall_done() due to
some error, the returned rpc reply crashes here:
@@ -514,6 +514,7 @@ decode_cb_sequence(struct xdr_stream *xdr, struct nfsd4_cb_sequence *res,
u32 dummy;
__be32 *p;
+ BUG_ON(!res);
if (res->cbs_minorversion == 0)
return 0;
[BUG_ON added for demonstration]
This is because the nfsd4_cb_done_sequence() has NULLed out
the task->tk_msg.rpc_resp pointer.
Also eventually the rpc would use the new slot without making
sure it is free by calling nfsd41_cb_setup_sequence().
This problem was introduced by a 4.1 protocol addition patch:
[0421b5c5] nfsd41: Backchannel: Implement cb_recall over NFSv4.1
Which was overlooking the possibility of an RPC callback retries.
For not-4.1 case redoing the _prepare is harmless.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We must create the server before we can call init_socks or check the
number of threads.
Symptoms were a NULL pointer dereference in nfsd_svc(). Problem
identified by Jeff Layton.
Also fix a minor cleanup-on-error case in nfsd_startup().
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Christoph points that the NFSv2/v3 callers know which case they want
here, so we may as well just call the file=NULL case directly instead of
making this conditional.
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fixes at least one real minor bug: the nfs4 recovery dir sysctl
would not return its status properly.
Also I finished Al's 1e41568d73 ("Take ima_path_check() in nfsd
past dentry_open() in nfsd_open()") commit, it moved the IMA
code, but left the old path initializer in there.
The rest is just dead code removed I think, although I was not
fully sure about the "is_borc" stuff. Some more review
would be still good.
Found by gcc 4.6's new warnings.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The vfs doesn't really allow us to "upgrade" a file descriptor from
read-only to read-write, and our attempt to do so in nfs4_upgrade_open
is ugly and incomplete.
Move to a different scheme where we keep multiple opens, shared between
open stateid's, in the nfs4_file struct. Each file will be opened at
most 3 times (for read, write, and read-write), and those opens will be
shared between all clients and openers. On upgrade we will do another
open if necessary instead of attempting to upgrade an existing open.
We keep count of the number of readers and writers so we know when to
close the shared files.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
It is legal to perform a write using the lock stateid that was
originally associated with a read lock, or with a file that was
originally opened for read, but has since been upgraded.
So, when checking the openmode, check the mode associated with the
open stateid from which the lock was derived.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The delegation code mostly pretends to support either read or write
delegations. However, correct support for write delegations would
require, for example, breaking of delegations (and/or implementation of
cb_getattr) on stat. Currently all that stops us from handing out
delegations is a subtle reference-counting issue.
Avoid confusion by adding an earlier check that explicitly refuses write
delegations.
For now, though, I'm not going so far as to rip out existing
half-support for write delegations, in case we get around to using that
soon.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
fanotify, the upcoming notification system actually needs a struct path so it can
do opens in the context of listeners, and it needs a file so it can get f_flags
from the original process. Close was the only operation that already was passing
a struct file to the notification hook. This patch passes a file for access,
modify, and open as well as they are easily available to these hooks.
Signed-off-by: Eric Paris <eparis@redhat.com>
The readahead cache compensates for the fact that the NFS server
currently does an open and close on every IO operation in the NFSv2 and
NFSv3 case.
In the NFSv4 case we have long-lived struct files associated with client
opens, so there's no need for this. In fact, concurrent IO's using
trying to modify the same file->f_ra may cause problems.
So, don't bother with the readahead cache in that case.
Note eventually we'll likely do this in the v2/v3 case as well by
keeping a cache of struct files instead of struct file_ra_state's.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is just cleanup--it's harmless to call nfsd_rachache_init,
nfsd_init_socks, and nfsd_reset_versions more than once. But there's no
point to it.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Right now, nfsd keeps a lockd reference for each socket that it has
open. This is unnecessary and complicates the error handling on
startup and shutdown. Change it to just do a lockd_up when starting
the first nfsd thread just do a single lockd_down when taking down the
last nfsd thread. Because of the strange way the sv_count is handled
this requires an extra flag to tell whether the nfsd_serv holds a
reference for lockd or not.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There doesn't seem to be any need to reset the nfssvc_boot time if the
nfsd startup failed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
__write_ports_addxprt calls nfsd_create_serv. That increases the
refcount of nfsd_serv (which is tracked in sv_nrthreads). The service
only decrements the thread count on error, not on success like
__write_ports_addfd does, so using this interface leaves the nfsd
thread count high.
Fix this by having this function call svc_destroy() on error to release
the reference (and possibly to tear down the service) and simply
decrement the refcount without tearing down the service on success.
This makes the sv_threads handling work basically the same in both
__write_ports_addxprt and __write_ports_addfd.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The refcounting for nfsd is a little goofy. What happens is that we
create the nfsd RPC service, attach sockets to it but don't actually
start the threads until someone writes to the "threads" procfile. To do
this, __write_ports_addfd will create the nfsd service and then will
decrement the refcount when exiting but won't actually destroy the
service.
This is fine when there aren't errors, but when there are this can
cause later attempts to start nfsd to fail. nfsd_serv will be set,
and that causes __write_versions to return EBUSY.
Fix this by calling svc_destroy on nfsd_serv when this function is
going to return error.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If someone tries to shut down the laundry_wq while it isn't up it'll
cause an oops.
This can happen because write_ports can create a nfsd_svc before we
really start the nfs server, and we may fail before the server is ever
started.
Also make sure state is shutdown on error paths in nfsd_svc().
Use a common global nfsd_up flag instead of nfs4_init, and create common
helper functions for nfsd start/shutdown, as there will be other work
that we want done only when we the number of nfsd threads transitions
between zero and nonzero.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Some well-known NFSv3 clients drop their directory entry caches when
they receive replies with no WCC data. Without this data, they
employ extra READ, LOOKUP, and GETATTR requests to ensure their
directory entry caches are up to date, causing performance to suffer
needlessly.
In order to return WCC data, our server has to have both the pre-op
and the post-op attribute data on hand when a reply is XDR encoded.
The pre-op data is filled in when the incoming fh is locked, and the
post-op data is filled in when the fh is unlocked.
Unfortunately, for REMOVE, RMDIR, MKNOD, and MKDIR, the directory fh
is not unlocked until well after the reply has been XDR encoded. This
means that encode_wcc_data() does not have wcc_data for the parent
directory, so none is returned to the client after these operations
complete.
By unlocking the parent directory fh immediately after the internal
operations for each NFS procedure is complete, the post-op data is
filled in before XDR encoding starts, so it can be returned to the
client properly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When the rarely-used callback-connection-changing setclientid occurs
simultaneously with a delegation recall, we rerun the recall by
requeueing it on a workqueue. But we also need to take a reference on
the delegation in that case, since the delegation held by the rpc itself
will be released by the rpc_release callback.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
To be used also for the pnfs cb_layoutrecall callback
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd4: fix cb_recall encoding]
"nfsd: nfs4callback encode_stateid helper function" forgot to reserve
more space after return from the new helper.
Reported-by: Michael Groshans <groshans@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If the server is out of memory is better for clients to back off and
retry than to just error out.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'for-2.6.35' of git://linux-nfs.org/~bfields/linux:
nfsd4: shut down callback queue outside state lock
nfsd: nfsd_setattr needs to call commit_metadata
This reportedly causes a lockdep warning on nfsd shutdown. That looks
like a false positive to me, but there's no reason why this needs the
state lock anyway.
Reported-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The conversion of write_inode_now calls to commit_metadata in commit
f501912a35 missed out the call in nfsd_setattr.
But without this conversion we can't guarantee that a SETATTR request
has actually been commited to disk with XFS, which causes a regression
from 2.6.32 (only for NFSv2, but anyway).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
NFSv4.1 adds additional flags to the share_access argument of the open
call. These flags need to be masked out in some of the existing code,
but current code does that inconsistently.
Tested-by: Michael Groshans <groshans@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If a recall fails for some unexpected reason, instead of ignoring it and
treating it like a success, it's safer to treat it as a failure,
preventing further delgation grants and returning CB_PATH_DOWN.
Also put put switches in a (two me) more logical order, with normal case
first.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Since rpc_call_async() guarantees that the release method will be called
even on failure, this put is wrong.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
- C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not
USHORT_MAX/SHORT_MAX/SHORT_MIN.
- Make SHRT_MIN of type s16, not int, for consistency.
[akpm@linux-foundation.org: fix drivers/dma/timb_dma.c]
[akpm@linux-foundation.org: fix security/keys/keyring.c]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the last user passing a NULL file pointer is gone we can remove
the redundant dentry argument and associated hacks inside vfs_fsynmc_range.
The next step will be removig the dentry argument from ->fsync, but given
the luck with the last round of method prototype changes I'd rather
defer this until after the main merge window.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of just looking up a path use do_filp_open to get us a file
structure for the nfs4 recovery directory. This allows us to get
rid of the last non-standard vfs_fsync caller with a NULL file
pointer.
[AV: should be using fput(), not filp_close()]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This reverts commit 78155ed75f.
We're depending here on the boot time that we use to generate the
stateid being monotonic, but get_seconds() is not necessarily.
We still depend at least on boot_time being different every time, but
that is a safer bet.
We have a few reports of errors that might be explained by this problem,
though we haven't been able to confirm any of them.
But the minor gain of distinguishing expired from stale errors seems not
worth the risk.
Conflicts:
fs/nfsd/nfs4state.c
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The alloc_init_file() first adds a file to the hash and then
initializes its fi_inode, fi_id and fi_had_conflict.
The uninitialized fi_inode could thus be erroneously checked by
the find_file(), so move the hash insertion lower.
The client_mutex should prevent this race in practice; however, we
eventually hope to make less use of the client_mutex, so the ordering
here is an accident waiting to happen.
I didn't find whether the same can be true for two other fields,
but the common sense tells me it's better to initialize an object
before putting it into a global hash table :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Note the position in the version array doesn't have to match the actual
rpc version number--to me it seems clearer to maintain the distinction.
Also document choice of rpc callback version number, as discussed in
e.g. http://www.ietf.org/mail-archive/web/nfsv4/current/msg07985.html
and followups.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The /proc/fs/nfsd/versions file calls nfsd_vers() to check whether
the particular nfsd version is present/available. The problem is
that once I turn off e.g. NFSD-V4 this call returns -1 which is
true from the callers POV which is wrong.
The proposal is to report false in that case.
The bug has existed since 6658d3a7bb "[PATCH] knfsd: remove
nfsd_versbits as intermediate storage for desired versions".
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: stable@kernel.org
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This is a mandatory operation. Also, here (not in open) is where we
should be committing the reboot recovery information.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
nfsd4_set_callback_client must be called under the state lock to atomically
set or unset the callback client and shutting down the previous one.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Get a refcount on the client on SEQUENCE,
Release the refcount and renew the client when all respective compounds completed.
Do not expire the client by the laundromat while in use.
If the client was expired via another path, free it when the compounds
complete and the refcount reaches 0.
Note that unhash_client_locked must call list_del_init on cl_lru as
it may be called twice for the same client (once from nfs4_laundromat
and then from expire_client)
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Mark the client as expired under the client_lock so it won't be renewed
when an nfsv4.1 session is done, after it was explicitly expired
during processing of the compound.
Do not renew a client mark as expired (in particular, it is not
on the lru list anymore)
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Currently just initialize the cl_refcount to 1
and decrement in expire_client(), conditionally freeing the
client when the refcount reaches 0.
To be used later by nfsv4.1 compounds to keep the client from
timing out while in use.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Separate out unhashing of the client and session.
To be used later by the laundromat.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
To be used later on to hold a reference count on the client while in use by a
nfsv4.1 compound.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
and grab the client lock once for all the client's sessions.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
In preparation to share the lock's scope to both client
and session hash tables.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
It's legal to send a DESTROY_SESSION outside any session (as the only
operation in a compound), in which case cstate->session will be NULL;
check for that case.
While we're at it, move these checks into a separate helper function.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
In the replay case, the
renew_client(session->se_client);
happens after we've droppped the sessionid_lock, and without holding a
reference on the session; so there's nothing preventing the session
being freed before we get here.
Thanks to Benny Halevy for catching a bug in an earlier version of this
patch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: Benny Halevy <bhalevy@panasas.com>
When read_buf is called to move over to the next page in the pagelist
of an NFSv4 request, it sets argp->end to essentially a random
number, certainly not an address within the page which argp->p now
points to. So subsequent calls to READ_BUF will think there is much
more than a page of spare space (the cast to u32 ensures an unsigned
comparison) so we can expect to fall off the end of the second
page.
We never encountered thsi in testing because typically the only
operations which use more than two pages are write-like operations,
which have their own decoding logic. Something like a getattr after a
write may cross a page boundary, but it would be very unusual for it to
cross another boundary after that.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We "goto finish" from several places where "exp" is an ERR_PTR. Also I
changed the check for "fsid_key" so that it was consistent with the check
I added.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Enforce the rules about compound op ordering.
Motivated by implementing RECLAIM_COMPLETE, for which the client is
implicit in the current session, so it is important to ensure a
succesful SEQUENCE proceeds the RECLAIM_COMPLETE.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The rfc allows a client to change the callback parameters, but we didn't
previously implement it.
Teach the callbacks to rerun themselves (by placing themselves on a
workqueue) when they recognize that their rpc task has been killed and
that the callback connection has changed.
Then we can change the callback connection by setting up a new rpc
client, modifying the nfs4 client to point at it, waiting for any work
in progress to complete, and then shutting down the old client.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Now that the shutdown sequence guarantees callbacks are shut down before
the client is destroyed, we no longer have a use for cl_count.
We'll probably reinstate a reference count on the client some day, but
it will be held by users other than callbacks.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The NFSv4 server's fl_break callback can sleep (dropping the BKL), in
order to allocate a new rpc task to send a recall to the client.
As far as I can tell this doesn't cause any races in the current code,
but the analysis is difficult. Also, the sleep here may complicate the
move away from the BKL.
So, just schedule some work to do the job for us instead. The work will
later also prove useful for restarting a call after the callback
information is changed.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Any null probe rpc will be synchronously destroyed by the
rpc_shutdown_client() in expire_client(), so the rpc task cannot outlast
the nfs4 client. Therefore there's no need for that task to hold a
reference on the client.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Once we've expired the client, there's no further purpose to the
callbacks; go ahead and shut down the callback client rather than
waiting for the last reference to go.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Instead of allocating this small structure, just include it in the
delegation.
The nfsd4_callback structure isn't really necessary yet, but we plan to
add to it all the information necessary to perform a callback.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
This is the second attempt to fix the problem whereby a COMMIT call
causes a lease break and triggers a possible deadlock.
The problem is that nfsd attempts to break a lease on a COMMIT call.
This triggers a delegation recall if the lease is held for a delegation.
If the client is the one holding the delegation and it's the same one on
which it's issuing the COMMIT, then it can't return that delegation
until the COMMIT is complete. But, nfsd won't complete the COMMIT until
the delegation is returned. The client and server are essentially
deadlocked until the state is marked bad (due to the client not
responding on the callback channel).
The first patch attempted to deal with this by eliminating the open of
the file altogether and simply had nfsd_commit pass a NULL file pointer
to the vfs_fsync_range. That would conflict with some work in progress
by Christoph Hellwig to clean up the fsync interface, so this patch
takes a different approach.
This declares a new NFSD_MAY_NOT_BREAK_LEASE access flag that indicates
to nfsd_open that it should not break any leases when opening the file,
and has nfsd_commit set that flag on the nfsd_open call.
For now, this patch leaves nfsd_commit opening the file with write
access since I'm not clear on what sort of access would be more
appropriate.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Both the _lookup and the _update functions for these two caches
independently calculate the hash of the key.
So factor out that code for improved reuse.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The current documentation here is out of date, and not quite right.
(Future work: some user documentation would be useful.)
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The original code here assumed we'd allow the user to change the lease
any time, but only allow the change to take effect on restart. Since
then we modified the code to allow setting the lease on when the server
is down. Update the rest of the code to reflect that fact, clarify
variable names, and add document.
Also, the code insisted that the grace period always be the longer of
the old and new lease periods, but that's overly conservative--as long
as it lasts at least the old lease period, old clients should still know
to recover in time.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Instead of accessing the lease time directly, some users call
nfs4_lease_time(), and some a macro, NFSD_LEASE_TIME, defined as
nfs4_lease_time(). Neither layer of indirection serves any purpose.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: (22 commits)
nfsd4: fix minor memory leak
svcrpc: treat uid's as unsigned
nfsd: ensure sockets are closed on error
Revert "sunrpc: move the close processing after do recvfrom method"
Revert "sunrpc: fix peername failed on closed listener"
sunrpc: remove unnecessary svc_xprt_put
NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN
xfs_export_operations.commit_metadata
commit_metadata export operation replacing nfsd_sync_dir
lockd: don't clear sm_monitored on nsm_reboot_lookup
lockd: release reference to nsm_handle in nlm_host_rebooted
nfsd: Use vfs_fsync_range() in nfsd_commit
NFSD: Create PF_INET6 listener in write_ports
SUNRPC: NFS kernel APIs shouldn't return ENOENT for "transport not found"
SUNRPC: Bury "#ifdef IPV6" in svc_create_xprt()
NFSD: Support AF_INET6 in svc_addsock() function
SUNRPC: Use rpc_pton() in ip_map_parse()
nfsd: 4.1 has an rfc number
nfsd41: Create the recovery entry for the NFSv4.1 client
nfsd: use vfs_fsync for non-directories
...
We'll introduce FMODE_RANDOM which will be runtime modified. So protect
all runtime modification to f_mode with f_lock to avoid races.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@kernel.org> [2.6.33.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
Currently various places in the VFS call vfs_dq_init directly. This means
we tie the quota code into the VFS. Get rid of that and make the
filesystem responsible for the initialization. For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.
For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.
For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.
Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
The server's callback client should stop trying to connect to the
client's callback server as soon as it gets ECONNREFUSED.
The NFS server's callback client does not call rpc_ping(), but appears
to have it's own "ping" procedure, so it wasn't covered by commit
caabea8a.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
- Add commit_metadata export_operation to allow the underlying filesystem to
decide how to commit an inode most efficiently.
- Usage of nfsd_sync_dir and write_inode_now has been replaced with the
commit_metadata function that takes a svc_fh.
- The commit_metadata function calls the commit_metadata export_op if it's
there, or else falls back to sync_inode instead of fsync and write_inode_now
because only metadata need be synced here.
- nfsd4_sync_rec_dir now uses vfs_fsync so that commit_metadata can be static
Signed-off-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
commit 1e41568d73 ("Take ima_path_check()
in nfsd past dentry_open() in nfsd_open()") moved this code back to its
original location but missed the "else".
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit f39bde24b2 fixed the error return from PUTROOTFH in the
case where there is no pseudofilesystem.
This is really a case we shouldn't hit on a correctly configured server:
in the absence of a root filehandle, there's no point accepting version
4 NFS rpc calls at all.
But the shared responsibility between kernel and userspace here means
the kernel on its own can't eliminate the possiblity of this happening.
And we have indeed gotten this wrong in distro's, so new client-side
mount code that attempts to negotiate v4 by default first has to work
around this case.
Therefore when commit f39bde24b2 arrived at roughly the same
time as the new v4-default mount code, which explicitly checked only for
the previous error, the result was previously fine mounts suddenly
failing.
We'll fix both sides for now: revert the error change, and make the
client-side mount workaround more robust.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
ima_path_check actually deals with files! call it ima_file_check instead.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The "Untangling ima mess, part 2 with counters" patch messed
up the counters. Based on conversations with Al Viro, this patch
streamlines ima_path_check() by removing the counter maintaince.
The counters are now updated independently, from measuring the file,
in __dentry_open() and alloc_file() by calling ima_counts_get().
ima_path_check() is called from nfsd and do_filp_open().
It also did not measure all files that should have been measured.
Reason: ima_path_check() got bogus value passed as mask.
[AV: mea culpa]
[AV: add missing nfsd bits]
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The NFS COMMIT operation allows the client to specify the exact byte range
that it wishes to sync to disk in order to optimise server performance.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Try to create a PF_INET6 listener for NFSD, if IPv6 is enabled in the
kernel.
Make sure nfsd_serv's reference count is decreased if
__write_ports_addxprt() failed to create a listener. See
__write_ports_addfd().
Our current plan is to rely on rpc.nfsd to create appropriate IPv6
listeners when server-side NFS/IPv6 support is desired. Legacy
behavior, via the write_threads or write_svc kernel APIs, will remain
the same -- only IPv4 listeners are created.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[bfields@citi.umich.edu: Move error-handling code to end]
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
write_ports() converts svc_create_xprt()'s ENOENT error return to
EPROTONOSUPPORT so that rpc.nfsd (in user space) can report an error
message that makes sense.
It turns out that several of the other kernel APIs rpc.nfsd use can
also return ENOENT from svc_create_xprt(), by way of lockd_up().
On the client side, an NFSv2 or NFSv3 mount request can also return
the result of lockd_up(). This error may also be returned during an
NFSv4 mount request, since the NFSv4 callback service uses
svc_create_xprt() to create the callback listener. An ENOENT error
return results in a confusing error message from the mount command.
Let's have svc_create_xprt() return EPROTONOSUPPORT instead of ENOENT.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Instead of opencoding the fsync calling sequence use vfs_fsync. This also
gets rid of the useless i_mutex over the data writeout.
Consolidate the remaining special code for syncing directories and document
it's quirks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Since we're checking for LAST_NFS4_OP, use FIRST_NFS4_OP to be consistent.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The server incorrectly assumes that the operations in the
array start with value 0. The first operation (OP_ACCESS)
has a value of 3, causing the check in nfsd4_decode_compound
to be off.
Instead of comparing that the operation number is less than
the number of elements in the array, the server should verify
that it is less than the maximum valid operation number
defined by LAST_NFS4_OP.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'for-2.6.33' of git://linux-nfs.org/~bfields/linux:
sunrpc: fix peername failed on closed listener
nfsd: make sure data is on disk before calling ->fsync
nfsd: fix "insecure" export option
nfsd is not using vfs_fsync, so I missed it when changing the calling
convention during the 2.6.32 window. This patch fixes it to not only
start the data writeout, but also wait for it to complete before calling
into ->fsync.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
A typo in 12045a6ee9 "nfsd: let "insecure" flag vary by
pseudoflavor" reversed the sense of the "insecure" flag.
Reported-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A typo in 12045a6ee9 "nfsd: let "insecure" flag vary by
pseudoflavor" reversed the sense of the "insecure" flag.
Reported-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (38 commits)
direct I/O fallback sync simplification
ocfs: stop using do_sync_mapping_range
cleanup blockdev_direct_IO locking
make generic_acl slightly more generic
sanitize xattr handler prototypes
libfs: move EXPORT_SYMBOL for d_alloc_name
vfs: force reval of target when following LAST_BIND symlinks (try #7)
ima: limit imbalance msg
Untangling ima mess, part 3: kill dead code in ima
Untangling ima mess, part 2: deal with counters
Untangling ima mess, part 1: alloc_file()
O_TRUNC open shouldn't fail after file truncation
ima: call ima_inode_free ima_inode_free
IMA: clean up the IMA counts updating code
ima: only insert at inode creation time
ima: valid return code from ima_inode_alloc
fs: move get_empty_filp() deffinition to internal.h
Sanitize exec_permission_lite()
Kill cached_lookup() and real_lookup()
Kill path_lookup_open()
...
Trivial conflicts in fs/direct-io.c
Kill the 'update' argument of ima_path_check(), kill
dead code in ima.
Current rules: ima counters are bumped at the same time
when the file switches from put_filp() fodder to fput()
one. Which happens exactly in two places - alloc_file()
and __dentry_open(). Nothing else needs to do that at
all.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* do ima_get_count() in __dentry_open()
* stop doing that in followups
* move ima_path_check() to right after nameidata_to_filp()
* don't bump counters on it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The new .h files have paths at the top that are now out of date. While
we're here, just remove all of those from fs/nfsd; they never served any
purpose.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
On V4ROOT exports, only accept filehandles that are the *root* of some
export. This allows mountd to allow or deny access to individual
directories and symlinks on the pseudofilesystem.
Note that the checks in readdir and lookup are not enough, since a
malicious host with access to the network could guess filehandles that
they weren't able to obtain through lookup or readdir.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We want to allow exports of symlinks, to allow mountd to communicate to
the kernel which symlinks lead to exports, and hence which symlinks need
to be visible on the pseudofilesystem.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
As with lookup, we treat every boject as a mountpoint and pretend it
doesn't exist if it isn't exported.
The preexisting code here is confusing, but I haven't yet figured out
how to make it clearer.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
If /A/mount/point/ has filesystem "B" mounted on top of it, and if "A"
is exported, but not "B", then the nfs server has always returned to the
client a filehandle for the mountpoint, instead of for the root of "B",
allowing the client to see the subtree of "A" that would otherwise be
hidden by B.
Disable this behavior in the case of V4ROOT exports; we implement the
path restrictions of V4ROOT exports by treating *every* directory as if
it were a mountpoint, and allowing traversal *only* if the new directory
is exported.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
NFSv4 differs from v2 and v3 in that it presents a single unified
filesystem tree, whereas v2 and v3 exported multiple filesystem (whose
roots could be found using a separate mount protocol).
Our original NFSv4 server implementation asked the administrator to
designate a single filesystem as the NFSv4 root, then to mount
filesystems they wished to export underneath. (Often using bind mounts
of already-existing filesystems.)
This was conceptually simple, and allowed easy implementation, but
created a serious obstacle to upgrading between v2/v3: since the paths
to v4 filesystems were different, administrators would have to adjust
all the paths in client-side mount commands when switching to v4.
Various workarounds are possible. For example, the administrator could
export "/" and designate it as the v4 root. However, the security risks
of that approach are obvious, and in any case we shouldn't be requiring
the administrator to take extra steps to fix this problem; instead, the
server should present consistent paths across different versions by
default.
These patches take a modified version of that approach: we provide a new
export option which exports only a subset of a filesystem. With this
flag, it becomes safe for mountd to export "/" by default, with no need
for additional configuration.
We begin just by defining the new flag.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This was an oversight; it should be among the export flags that can be
allowed to vary by pseudoflavor. This allows an administrator to (for
example) allow auth_sys mounts only from low ports, but allow auth_krb5
mounts to use any port.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Soon we will add the new V4ROOT flag, and allow the INSECURE flag to
vary by pseudoflavor. It would be useful for nfs-utils (for example,
for improved exportfs error reporting) to be able to know when this
happens. Use this new interface for that purpose.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Lots of include/linux/nfsd/* headers are only used by
nfsd module. Move them to the source directory
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Now that the headers are fixed and carry their own wait, all fs/nfsd/
source files can include a minimal set of headers. and still compile just
fine.
This patch should improve the compilation speed of the nfsd module.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
NFSv4 opens may function as locks denying other NFSv4 users the rights
to open a file.
We're requiring a user to have write permissions before they can deny
write. We're *not* requiring a user to have write permissions to deny
read, which is if anything a more drastic denial.
What was intended was to require write permissions for DENY_READ.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
All nfsd security depends on the security checks in fh_verify, and
especially on nfsd_setuser().
It therefore bothers me that the nfsd_setuser call may be made from
three different places, depending on whether the filehandle has already
been mapped to a dentry, and on whether subtreechecking is in force.
Instead, make an unconditional call in fh_verify(), so it's trivial to
verify that the call always occurs.
That leaves us with a redundant nfsd_setuser() call in the subtreecheck
case--it needs the correct user set earlier in order to check execute
permissions on the path to this filehandle--but I'm willing to accept
that minor inefficiency in the subtreecheck case in return for more
straightforward permission checking.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Commit 8177e6d6df ("nfsd: clean up
readdirplus encoding") introduced single character typo in nfs3 readdir+
implementation. Unfortunately that typo has quite bad side effects:
random memory corruption, followed (on my box) with immediate
spontaneous box reboot.
Using 'p1' instead of 'p' fixes my Linux box rebooting whenever VMware
ESXi box tries to list contents of my home directory.
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
None of this stuff is used outside nfsd, so move it out of the common
linux include directory.
Actually, probably none of the stuff in include/linux/nfsd/nfsd.h really
belongs there, so later we may remove that file entirely.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Modify the NFS server to register the NFS_ACL services with the rpcbind
daemon. This allows the client to ping for the existence of the NFS_ACL
support via commands such as "rpcinfo -t <server> nfs_acl".
This patch also modifies the NFS_ACL support so that responses to
version 2 NULLPROC requests can be made.
The changelog for the patch which turned off this functionality
mentioned something about not registering the NFS_ACL as being part of
some tradition. I can't find this tradition and the only other
implementation which supports NFS_ACL does register them with the
rpcbind daemon.
Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We have been doing some extensive testing of Linux support for ACLs on
NFDS v4. We have noticed that the server rejects ACLs where the groups
are out of order, for example, the following ACL is rejected:
A::OWNER@:rwaxtTcCy
A::user101@domain:rwaxtcy
A::GROUP@:rwaxtcy
A:g:group102@domain:rwaxtcy
A:g:group101@domain:rwaxtcy
A::EVERYONE@:rwaxtcy
Examining the server code, I found that after converting an NFS v4 ACL
to POSIX, sort_pacl is called to sort the user ACEs and group ACEs.
Unfortunately, a minor bug causes the group sort to be skipped.
Signed-off-by: Frank Filz <ffilzlnx@us.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We do the same calculation in a couple places; use a helper function,
and add a little documentation, in the hopes of preventing bugs like
that fixed in the last patch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Unbalanced calculations on creation and destruction of sessions could
cause our estimate of cache memory used to become negative, sometimes
resulting in spurious SERVERFAULT returns to client CREATE_SESSION
requests.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
ca_maxresponsesize and ca_maxrequest size include the RPC header.
sv_max_mesg is sv_max_payolad plus a page for overhead and is used in
svc_init_buffer to allocate server buffer space for both the request and reply.
Note that this means we can service an RPC compound that requires
ca_maxrequestsize (MAXWRITE) or ca_max_responsesize (MAXREAD) but that we do
not support an RPC compound that requires both ca_maxrequestsize and
ca_maxresponsesize.
Signed-off-by: Andy Adamson <andros@netapp.com>
[bfields@citi.umich.edu: more documentation updates]
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We really shouldn't hit this case at all, and forthcoming kernel and
nfs-utils changes should eliminate this case; if it does happen,
consider it a bug rather than reporting an error that doesn't really
make sense for the operation (since there's no reason for a server to be
accepting v4 traffic yet have no root filehandle).
Also move some exp_pseudoroot code into a helper function while we're
here.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
3c394ddaa7 "nfsd4: nfsv4 clients should
cross mountpoints" forgot to handle lookups of parents directories.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* remove asm/atomic.h inclusion from linux/utsname.h --
not needed after kref conversion
* remove linux/utsname.h inclusion from files which do not need it
NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however
due to some personality stuff it _is_ needed -- cowardly leave ELF-related
headers and files alone.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.
This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-2.6.32' of git://linux-nfs.org/~bfields/linux: (68 commits)
nfsd4: nfsv4 clients should cross mountpoints
nfsd: revise 4.1 status documentation
sunrpc/cache: avoid variable over-loading in cache_defer_req
sunrpc/cache: use list_del_init for the list_head entries in cache_deferred_req
nfsd: return success for non-NFS4 nfs4_state_start
nfsd41: Refactor create_client()
nfsd41: modify nfsd4.1 backchannel to use new xprt class
nfsd41: Backchannel: Implement cb_recall over NFSv4.1
nfsd41: Backchannel: cb_sequence callback
nfsd41: Backchannel: Setup sequence information
nfsd41: Backchannel: Server backchannel RPC wait queue
nfsd41: Backchannel: Add sequence arguments to callback RPC arguments
nfsd41: Backchannel: callback infrastructure
nfsd4: use common rpc_cred for all callbacks
nfsd4: allow nfs4 state startup to fail
SUNRPC: Defer the auth_gss upcall when the RPC call is asynchronous
nfsd4: fix null dereference creating nfsv4 callback client
nfsd4: fix whitespace in NFSPROC4_CLNT_CB_NULL definition
nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel
sunrpc/cache: simplify cache_fresh_locked and cache_fresh_unlocked.
...
Allow NFS v4 clients to seamlessly cross mount point without
have to set either the 'crossmnt' or the 'nohide' export
options.
Signed-Off-By: Steve Dickson <steved@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Move common initialization of 'struct nfs4_client' inside create_client().
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
[nfsd41: Remember the auth flavor to use for callbacks]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This patch enables the use of the nfsv4.1 backchannel.
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
[initialize rpc_create_args.bc_xprt too]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Implement the cb_sequence callback conforming to draft-ietf-nfsv4-minorversion1
Note: highest slot id and target highest slot id do not have to be 0
as was previously implemented. They can be greater than what the
nfs server sent if the client supports a larger slot table on the
backchannel. At this point we just ignore that.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
[Rework the back channel xdr using the shared v4.0 and v4.1 framework.]
Signed-off-by: Andy Adamson <andros@netapp.com>
[fixed indentation]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: use nfsd4_cb_sequence for callback minorversion]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: fix verification of CB_SEQUENCE highest slot id[
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: Backchannel: Remove old backchannel serialization]
[nfsd41: Backchannel: First callback sequence ID should be 1]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: decode_cb_sequence does not need to actually decode ignored fields]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Follows the model used by the NFS client. Setup the RPC prepare and done
function pointers so that we can populate the sequence information if
minorversion == 1. rpc_run_task() is then invoked directly just like
existing NFS client operations do.
nfsd4_cb_prepare() determines if the sequence information needs to be setup.
If the slot is in use, it adds itself to the wait queue.
nfsd4_cb_done() wakes anyone sleeping on the callback channel wait queue
after our RPC reply has been received. It also sets the task message
result pointer to NULL to clearly indicate we're done using it.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
[define and initialize cl_cb_seq_nr here]
[pulled out unused defintion of nfsd4_cb_done]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
RPC callback requests will wait on this wait queue if the backchannel
is out of slots.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Follow the model we use in the client. Make the sequence arguments
part of the regular RPC arguments. None of the callbacks that are
soon to be implemented expect results that need to be passed back
to the caller, so we don't define a separate RPC results structure.
For session validation, the cb_sequence decoding will use a pointer
to the sequence arguments that are part of the RPC argument.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
[define struct nfsd4_cb_sequence here]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Keep the xprt used for create_session in cl_cb_xprt.
Mark cl_callback.cb_minorversion = 1 and remember
the client provided cl_callback.cb_prog rpc program number.
Use it to probe the callback path.
Use the client's network address to initialize as the
callback's address as expected by the xprt creation
routines.
Define xdr sizes and code nfs4_cb_compound header to be able
to send a null callback rpc.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
[get callback minorversion from fore channel's]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: change bc_sock to bc_xprt]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pulled definition for cl_cb_xprt]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: set up backchannel's cb_addr]
[moved rpc_create_args init to "nfsd: modify nfsd4.1 backchannel to use new xprt class"]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Callbacks are always made using the machine's identity, so we can use a
single auth_generic credential shared among callbacks to all clients and
let the rpc code take care of the rest.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
On setting up the callback to the client, we attempt to use the same
authentication flavor the client did. We find an rpc cred to use by
calling rpcauth_lookup_credcache(), which assumes that the given
authentication flavor has a credentials cache. However, this is not
required to be true--in particular, auth_null does not use one.
Instead, we should call the auth's lookup_cred() method.
Without this, a client attempting to mount using nfsv4 and auth_null
triggers a null dereference.
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
