Add driver for the Qualcomm interconnect buses found in SDX55 based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Based on SM8250 driver and generated from downstream dts.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210121053254.8355-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add driver for the Qualcomm interconnect buses found in MSM8939 based
platforms. The topology consists of four NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20201204075345.5161-6-jun.nie@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Use shared code for aggregate functionalities and probe function
to remove duplicated code.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20201204075345.5161-3-jun.nie@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add RPM based interconnect driver implements the set and aggregate
functionalities that translates bandwidth requests into RPM messages.
These modules provide a common set of functionalities for all
Qualcomm RPM based interconnect providers and should help reduce code
duplication when adding new providers.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20201204075345.5161-2-jun.nie@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add the icc_sync_state callback to notify the framework when consumers
are probed and the bandwidth doesn't have to be kept at maximum anymore.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Suggested-by: Georgi Djakov <georgi.djakov@linaro.org>
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Link: https://lore.kernel.org/r/20201210100906.18205-6-martin.kepplinger@puri.sm
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
When CONFIG_COMPILE_TEST is set, it is possible to build some
of the interconnect drivers into the kernel while their dependencies
are loadable modules, which is bad:
arm-linux-gnueabi-ld: drivers/interconnect/qcom/bcm-voter.o: in function `qcom_icc_bcm_voter_commit':
(.text+0x1f8): undefined reference to `rpmh_invalidate'
arm-linux-gnueabi-ld: (.text+0x20c): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: (.text+0x2b0): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: (.text+0x2e8): undefined reference to `rpmh_write_batch'
arm-linux-gnueabi-ld: drivers/interconnect/qcom/icc-rpmh.o: in function `qcom_icc_bcm_init':
(.text+0x2ac): undefined reference to `cmd_db_read_addr'
arm-linux-gnueabi-ld: (.text+0x2c8): undefined reference to `cmd_db_read_aux_data'
The exact dependencies are a bit complicated, so split them out into a
hidden Kconfig symbol that all drivers can in turn depend on to get it
right.
Fixes: 976daac4a1 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201204165030.3747484-1-arnd@kernel.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already support.
This is also known as the SigmaStar SSD202D, and we add support for
the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the Ampere
Altra based "Fii Kudo" server and the Quanta GSJ, both of which are
added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last year's
generation, also added along with its reference board. This one is
still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into low-end
tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM,
and one machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board
for the aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape
LX2162A, which is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based board,
- IEI Puzzle-M801, a rackmount network appliance based on
Marvell Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm
sm8250 and sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook
(sc7180)
- New board variants of the Renesas based "Kingfisher" and
"HiHope" reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with
a few carrier boards.
There is one conflict in mt6577_auxadc.txt, which got replaced in
another tree and modified here, the modification is already part of
the new file.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=R47r
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
For SM8250 the recently introduced support for handling boot-loader
stream mappings in the ARM SMMU allow us to enable this, and thereby USB
controller and PHY, SDHCI controller and FastRPC, as well as support for
the SM8250 HDK board has been added. Additionally PRNG and RTC is
enabled.
Similarly for SM8150, the ARM SMMU could be added which allows the
secondary USB controller and PHYs, as well as WiFi to be added and
support for the SM8150 HDK board to be introduced. Additionally
Coresight and support for the last-level cache controller was added.
MSM8916 finally has VDDCX and VDDMX removed as regulators and are now
handled by the rpmpd driver for the devices controlling them. The
Longsheer L8150 gains touchscreen, sensors, vibrator and LED support.
MSM8992 gains USB and SDHCI support as well as an I2C controller and the
associated RMI4 based touchscreen for the Lumia 950.
MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm
support. Then support for the Lumia 950 XL is added.
SDM845 gains interconnect properties for a number of devices and the
GENI wrappers gains iommu stream configuration, which means DMA
operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the
SMMU enabled, a few fixes and the description of the eDP bridge and
panel means that the laptop can now boot mainline with working display,
GPU, WiFi and audio.
SC7180 gains a slew of smaller improvements and fixes.
-----BEGIN PGP SIGNATURE-----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=lkn4
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for 5.11
For SM8250 the recently introduced support for handling boot-loader
stream mappings in the ARM SMMU allow us to enable this, and thereby USB
controller and PHY, SDHCI controller and FastRPC, as well as support for
the SM8250 HDK board has been added. Additionally PRNG and RTC is
enabled.
Similarly for SM8150, the ARM SMMU could be added which allows the
secondary USB controller and PHYs, as well as WiFi to be added and
support for the SM8150 HDK board to be introduced. Additionally
Coresight and support for the last-level cache controller was added.
MSM8916 finally has VDDCX and VDDMX removed as regulators and are now
handled by the rpmpd driver for the devices controlling them. The
Longsheer L8150 gains touchscreen, sensors, vibrator and LED support.
MSM8992 gains USB and SDHCI support as well as an I2C controller and the
associated RMI4 based touchscreen for the Lumia 950.
MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm
support. Then support for the Lumia 950 XL is added.
SDM845 gains interconnect properties for a number of devices and the
GENI wrappers gains iommu stream configuration, which means DMA
operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the
SMMU enabled, a few fixes and the description of the eDP bridge and
panel means that the laptop can now boot mainline with working display,
GPU, WiFi and audio.
SC7180 gains a slew of smaller improvements and fixes.
* tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (93 commits)
arm64: dts: qcom: c630: Define eDP bridge and panel
arm64: dts: qcom: c630: Fix pinctrl pins properties
arm64: dts: qcom: c630: Polish i2c-hid devices
arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver
arm64: dts: sdm845: Add interconnect properties for QUP
interconnect: qcom: sdm845: Add the missing nodes for QUP
dt-bindings: interconnect: sdm845: Add IDs for the QUP ports
arm64: dts: qcom: c630: Expose LID events
arm64: dts: qcom: c630: Re-enable apps_smmu
dts: qcom: sdm845: Add dt entries to support crypto engine.
arm64: dts: qcom: qrb5165-rb5: Add support for MCP2518FD
arm64: dts: qcom: sdm845: use GIC_SPI for IPA interrupts
arm64: dts: qcom: sc7180: use GIC_SPI for IPA interrupts
arm64: dts: qcom: sc7180: limit IPA iommu streams
arm64: dts: qcom: sm8150: Add Coresight support
arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub
arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant
arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite
arm64: dts: qcom: sc7180-trogdor: add "pen-insert" label for trogdor
arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor
...
Link: https://lore.kernel.org/r/20201130190131.345187-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here are the interconnect changes for the 5.10-rc1 merge window
consisting of new driver and a cleanup.
Driver changes:
- New driver for Samsung Exynos SoCs
- Misc cleanups
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-----BEGIN PGP SIGNATURE-----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=a7If
-----END PGP SIGNATURE-----
Merge tag 'icc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 5.11
Here are the interconnect changes for the 5.10-rc1 merge window
consisting of new driver and a cleanup.
Driver changes:
- New driver for Samsung Exynos SoCs
- Misc cleanups
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
MAINTAINERS: Add entry for Samsung interconnect drivers
interconnect: Add generic interconnect driver for Exynos SoCs
interconnect: qcom: Simplify the vcd compare function
The QUP nodes are currently defined just as entries in the topology,
but they are not referenced by any of the NoCs. Let's fix this and
"attach" them to their NoCs, so that the QUP drivers are able to use
them as path endpoints and scale their bandwidth.
This is based on the information from the downstream msm-4.9 kernel.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20201105135211.7160-2-georgi.djakov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch adds a generic interconnect driver for Exynos SoCs in order
to provide interconnect functionality for each "samsung,exynos-bus"
compatible device.
The SoC topology is a graph (or more specifically, a tree) and its
edges are described by specifying in the 'interconnects' property
the interconnect consumer path for each interconnect provider DT node.
Each bus is now an interconnect provider and an interconnect node as
well (cf. Documentation/interconnect/interconnect.rst), i.e. every bus
registers itself as a node. Node IDs are not hard coded but rather
assigned dynamically at runtime. This approach allows for using this
driver with various Exynos SoCs.
Frequencies requested via the interconnect API for a given node are
propagated to devfreq using dev_pm_qos_update_request(). Please note
that it is not an error when CONFIG_INTERCONNECT is 'n', in which
case all interconnect API functions are no-op.
The samsung,data-clk-ratio DT property is used to specify the ratio
of the interconect bandwidth to the minimum data clock frequency
for each bus.
Due to unspecified relative probing order, -EPROBE_DEFER may be
propagated to ensure that the parent is probed before its children.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Artur Świgoń <a.swigon@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20201112140931.31139-3-s.nawrocki@samsung.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Let's simplify the cmp_vcd() function and replace the conditionals
with just a single statement, which also improves readability.
Reviewed-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20201013171923.7351-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
of_count_icc_providers() function uses for_each_available_child_of_node()
helper to recursively check all the available nodes. This helper already
properly handles child nodes' reference count, so there is no need to do
it explicitly. Remove the excessive call to of_node_put(). This fixes
memory trashing when CONFIG_OF_DYNAMIC is enabled (for example
arm/multi_v7_defconfig).
Fixes: b1d681d8d3 ("interconnect: Add sync state support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201119103746.32564-1-m.szyprowski@samsung.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The following errors are noticed during boot on a QCS404 board:
[ 2.926647] qcom_icc_rpm_smd_send mas 6 error -6
[ 2.934573] qcom_icc_rpm_smd_send mas 8 error -6
These errors show when we try to configure the GPU and display nodes.
Since these particular nodes aren't supported on RPM and are purely
local, we should just change their mas_rpm_id to -1 to avoid any
requests being sent for these master IDs.
Reviewed-by: Mike Tipton <mdtipton@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201118111044.26056-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Some nodes are incorrectly marked as RPM-controlled (they have RPM
master and slave ids assigned), but are actually controlled by the
application CPU instead. The RPM complains when we send requests for
resources that it can't control. Let's fix this by replacing the IDs,
with the default "-1" in which case no requests are sent.
Reviewed-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20201112105140.10092-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
It has been reported that on Fairphone 2 (msm8974-based), increasing
the clock rate for some of the NoCs during boot may lead to hangs.
Let's restore the original behavior and not touch the clock rate of
any of the NoCs to fix the regression.
Reported-by: Luca Weiss <luca@z3ntu.xyz>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Fixes: b1d681d8d3 ("interconnect: Add sync state support")
Link: https://lore.kernel.org/r/20201109124512.10776-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
When sync_state support got introduced recently, by default we try to
set the NoCs to run initially at maximum rate. But as these values are
aggregated, we may end with a really big clock rate value, which is
then converted from "u64" to "long" during the clock rate rounding.
But on 32bit platforms this may result an overflow. Fix it by making
sure that the rate is within range.
Reported-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20201106144847.7726-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
In addition to the rest of Qcom interconnect drivers use icc_sync_state
for SM8150/SM8250 interconnect drivers to notify the interconnect
framework when all consumers are probed and there is no need to keep the
bandwidth set to maximum anymore.
Also move the BCM initialization before creating the nodes to set the
max bandwidth in hardware for the initialization/probing stage.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Link: https://lore.kernel.org/r/20201027133418.976687-1-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Take into account the initial bandwidth from the framework and update
the internal sum and max values before committing if needed. This will
ensure that the floor bandwidth values are enforced until the providers
get into sync state.
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Tested-by: Akash Asthana <akashast@codeaurora.org>
Link: https://lore.kernel.org/r/20201021155938.9223-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Currently if we use sync_state, by default the bandwidth is maxed out,
but in order to set this in hardware, the BCMs (Bus Clock Managers) need
to be initialized first. Move the BCM initialization before creating the
nodes to fix this.
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201013135913.29059-3-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Currently if we use sync_state, by default the bandwidth is maxed out,
but in order to set this in hardware, the BCMs (Bus Clock Managers) need
to be initialized first. Move the BCM initialization before creating the
nodes to fix this.
Fixes: 7d3b0b0d81 ("interconnect: qcom: Use icc_sync_state")
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201013135913.29059-2-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
When setting the initial bandwidth, make sure to call the aggregate()
function (if such is implemented for the current provider), to handle
cases when data needs to be aggregated first.
Fixes: b1d681d8d3 ("interconnect: Add sync state support")
Acked-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201013135913.29059-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
After enabling interconnect scaling for display on the db845c board,
in certain configurations the board hangs, while the following errors
are observed on the console:
Error sending AMC RPMH requests (-110)
qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000
qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000
qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x50000
...
In this specific case, the above is related to one of the sequencers
being stuck, while client drivers are returning from probe and trying
to disable the currently unused clock and interconnect resources.
Generally we want to keep the multimedia NoC enabled like the rest of
the NoCs, so let's set the keepalive flag on it too.
Fixes: aae57773fb ("interconnect: qcom: sdm845: Split qnodes into their respective NoCs")
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Mike Tipton <mdtipton@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20201012194034.26944-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200902172433.1138-2-krzk@kernel.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200902172433.1138-1-krzk@kernel.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* icc-syncstate:
interconnect: Add get_bw() callback
interconnect: Add sync state support
interconnect: qcom: Use icc_sync_state
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Lowering the bandwidth on the bus might have negative consequences if
it's done before all consumers had a chance to cast their vote. Now by
default the framework sets the bandwidth to maximum during boot. We need
to use the icc_sync_state callback to notify the framework when all
consumers are probed and there is no need to keep the bandwidth set to
maximum anymore.
Link: https://lore.kernel.org/r/20200825170152.6434-4-georgi.djakov@linaro.org
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The bootloaders often do some initial configuration of the interconnects
in the system and we want to keep this configuration until all consumers
have probed and expressed their bandwidth needs. This is because we don't
want to change the configuration by starting to disable unused paths until
every user had a chance to request the amount of bandwidth it needs.
To accomplish this we will implement an interconnect specific sync_state
callback which will synchronize (aggregate and set) the current bandwidth
settings when all consumers have been probed.
Link: https://lore.kernel.org/r/20200825170152.6434-3-georgi.djakov@linaro.org
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
These structures aren't modified at runtime. Mark them const so they get
moved to read-only memory. We have to cast away const in one place when
we store into the data member of struct icc_node. This is paired with a
re-const of the data member when it is extracted in qcom_icc_set().
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20200914182112.513981-1-swboyd@chromium.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Use the qcom_icc_xlate_extended() in order to parse tags, that are
specified as an additional arguments to the path endpoints in DT.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20200903133134.17201-7-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Use the qcom_icc_xlate_extended() in order to parse tags, that are
specified as an additional arguments to the path endpoints in DT.
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20200903133134.17201-5-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Implement a function to parse the arguments of the "interconnects" DT
property and populate the interconnect path tags if this information
is available.
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200903133134.17201-4-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Currently there is the xlate() callback, which is used by providers for
mapping the nodes from phandle arguments. That's fine for simple mappings,
but the phandle arguments could contain an additional data, such as tag
information. Let's create another callback xlate_extended() for the cases
where providers want also populate the path tag data.
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Currently, bcm-voter always assumes requests are made in KBps and that
BCM HW always wants them in Bps, so it always scales the requests by
1000. However, certain use cases and BCMs may use different units.
Thus, add support for BCM-specific scaling factors.
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20200903192149.30385-7-mdtipton@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Change the default TCS wait behavior to only wait for completion in AMC
and WAKE. Waiting isn't necessary in the SLEEP TCS, since votes are only
being removed in this case. Resources can be safely disabled
asynchronously in parallel with the rest of the power collapse sequence.
This reduces the sleep entry latency.
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20200903192149.30385-6-mdtipton@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Currently, all bcm-voters set tcs_cmd::wait=true for the last VCD
command in each TCS (AMC, WAKE, and SLEEP). However, some bcm-voters
don't need the completion and instead need to optimize for latency. For
instance, disabling wait-for-completion in the WAKE set can decrease
resume latency and allow for certain operations to occur in parallel
with the WAKE TCS triggering. This is only safe in very specific
situations. Keep the default behavior of always waiting, but allow it to
be overridden in devicetree.
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20200903192149.30385-5-mdtipton@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add generic qcom interconnect bindings that are common across platforms. In
particular, these include QCOM_ICC_TAG_* macros that clients can use when
calling icc_set_tag().
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200903192149.30385-3-mdtipton@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add driver for the Qualcomm interconnect buses found in SM8250 based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Based on SC7180 driver and generated from downstream dts.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200728023811.5607-6-jonathan@marek.ca
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add driver for the Qualcomm interconnect buses found in SM8150 based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Based on SC7180 driver and generated from downstream dts.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200728023811.5607-5-jonathan@marek.ca
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
There are drivers which just need to get multiple interconnect paths,
request some predefined amounts of bandwidth and then just toggle the
paths between enabled/disabled state.
The aim of this patch is simplify the above and to allow drivers to put
all the path names and bandwidth data into a single static icc_bulk_data
table and call the icc_bulk_* functions on that table in order to scale
all the interconnect paths in parallel.
Suggested-by: Evan Green <evgreen@chromium.org>
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200729123439.9961-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Small BW votes that translate to less than a single BCM unit are
currently truncated to zero. Ensure that non-zero BW requests always
result in at least a vote of 1 to BCM.
Fixes: 976daac4a1 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Link: https://lore.kernel.org/r/20200903192149.30385-2-mdtipton@codeaurora.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
For disabled paths the 'interconnect_summary' in debugfs currently shows
the orginally requested bandwidths. This is confusing, since the bandwidth
requests aren't active. Instead show the bandwidths for disabled
paths/requests as zero.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Link: https://lore.kernel.org/r/20200729104933.1.If8e80e4c0c7ddf99056f6e726e59505ed4e127f3@changeid
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
