When the CRTC is enabled, make sure the VBLANK machinery is enabled.
Failure to do so will cause drm_vblank_get() to not enable the VBLANK on
the CRTC and VBLANK-synchronized page-flips won't work.
While at it, get rid of the legacy drm_vblank_pre_modeset() and
drm_vblank_post_modeset() calls that are replaced by drm_vblank_on()
and drm_vblank_off().
Reported-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pull drm updates from Dave Airlie:
"This is the main git pull for the drm,
I pretty much froze major pulls at -rc5/6 time, and haven't had much
fallout, so will probably continue doing that.
Lots of changes all over, big internal header cleanup to make it clear
drm features are legacy things and what are things that modern KMS
drivers should be using. Also big move to use the new generic fences
in all the TTM drivers.
core:
atomic prep work,
vblank rework changes, allows immediate vblank disables
major header reworking and cleanups to better delinate legacy
interfaces from what KMS drivers should be using.
cursor planes locking fixes
ttm:
move to generic fences (affects all TTM drivers)
ppc64 caching fixes
radeon:
userptr support,
uvd for old asics,
reset rework for fence changes
better buffer placement changes,
dpm feature enablement
hdmi audio support fixes
intel:
Cherryview work,
180 degree rotation,
skylake prep work,
execlist command submission
full ppgtt prep work
cursor improvements
edid caching,
vdd handling improvements
nouveau:
fence reworking
kepler memory clock work
gt21x clock work
fan control improvements
hdmi infoframe fixes
DP audio
ast:
ppc64 fixes
caching fix
rcar:
rcar-du DT support
ipuv3:
prep work for capture support
msm:
LVDS support for mdp4, new panel, gpu refactoring
exynos:
exynos3250 SoC support, drop bad mmap interface,
mipi dsi changes, and component match support"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits)
drm/mst: rework payload table allocation to conform better.
drm/ast: Fix HW cursor image
drm/radeon/kv: add uvd/vce info to dpm debugfs output
drm/radeon/ci: add uvd/vce info to dpm debugfs output
drm/radeon: export reservation_object from dmabuf to ttm
drm/radeon: cope with foreign fences inside the reservation object
drm/radeon: cope with foreign fences inside display
drm/core: use helper to check driver features
drm/radeon/cik: write gfx ucode version to ucode addr reg
drm/radeon/si: print full CS when we hit a packet 0
drm/radeon: remove unecessary includes
drm/radeon/combios: declare legacy_connector_convert as static
drm/radeon/atombios: declare connector convert tables as static
drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table
drm/radeon/dpm: drop clk/voltage dependency filters for BTC
drm/radeon/dpm: drop clk/voltage dependency filters for CI
drm/radeon/dpm: drop clk/voltage dependency filters for SI
drm/radeon/dpm: drop clk/voltage dependency filters for NI
drm/radeon: disable audio when we disable hdmi (v2)
drm/radeon: split audio enable between eg and r600 (v2)
...
Pull core locking updates from Ingo Molnar:
"The main updates in this cycle were:
- mutex MCS refactoring finishing touches: improve comments, refactor
and clean up code, reduce debug data structure footprint, etc.
- qrwlock finishing touches: remove old code, self-test updates.
- small rwsem optimization
- various smaller fixes/cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Revert qrwlock recusive stuff
locking/rwsem: Avoid double checking before try acquiring write lock
locking/rwsem: Move EXPORT_SYMBOL() lines to follow function definition
locking/rwlock, x86: Delete unused asm/rwlock.h and rwlock.S
locking/rwlock, x86: Clean up asm/spinlock*.h to remove old rwlock code
locking/semaphore: Resolve some shadow warnings
locking/selftest: Support queued rwlock
locking/lockdep: Restrict the use of recursive read_lock() with qrwlock
locking/spinlocks: Always evaluate the second argument of spin_lock_nested()
locking/Documentation: Update locking/mutex-design.txt disadvantages
locking/Documentation: Move locking related docs into Documentation/locking/
locking/mutexes: Use MUTEX_SPIN_ON_OWNER when appropriate
locking/mutexes: Refactor optimistic spinning code
locking/mcs: Remove obsolete comment
locking/mutexes: Document quick lock release when unlocking
locking/mutexes: Standardize arguments in lock/unlock slowpaths
locking: Remove deprecated smp_mb__() barriers
Pull vfs updates from Al Viro:
"The big thing in this pile is Eric's unmount-on-rmdir series; we
finally have everything we need for that. The final piece of prereqs
is delayed mntput() - now filesystem shutdown always happens on
shallow stack.
Other than that, we have several new primitives for iov_iter (Matt
Wilcox, culled from his XIP-related series) pushing the conversion to
->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c
cleanups and fixes (including the external name refcounting, which
gives consistent behaviour of d_move() wrt procfs symlinks for long
and short names alike) and assorted cleanups and fixes all over the
place.
This is just the first pile; there's a lot of stuff from various
people that ought to go in this window. Starting with
unionmount/overlayfs mess... ;-/"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits)
fs/file_table.c: Update alloc_file() comment
vfs: Deduplicate code shared by xattr system calls operating on paths
reiserfs: remove pointless forward declaration of struct nameidata
don't need that forward declaration of struct nameidata in dcache.h anymore
take dname_external() into fs/dcache.c
let path_init() failures treated the same way as subsequent link_path_walk()
fix misuses of f_count() in ppp and netlink
ncpfs: use list_for_each_entry() for d_subdirs walk
vfs: move getname() from callers to do_mount()
gfs2_atomic_open(): skip lookups on hashed dentry
[infiniband] remove pointless assignments
gadgetfs: saner API for gadgetfs_create_file()
f_fs: saner API for ffs_sb_create_file()
jfs: don't hash direct inode
[s390] remove pointless assignment of ->f_op in vmlogrdr ->open()
ecryptfs: ->f_op is never NULL
android: ->f_op is never NULL
nouveau: __iomem misannotations
missing annotation in fs/file.c
fs: namespace: suppress 'may be used uninitialized' warnings
...
The old code has problems with the Dell MST monitors due to some
assumptions I made that weren't true.
I initially thought the Virtual Channel Payload IDs had to be in
the DPCD table in ascending order, however it appears that assumption
is bogus.
The old code also assumed it was possible to insert a member
into the table and it would move other members up, like it does
when you remove table entries, however reality has shown this
isn't true.
So the new code allocates VCPIs separate from entries in the payload
tracking table, and when we remove an entry from the DPCD table,
I shuffle the tracking payload entries around in the struct.
This appears to make VT switch more robust (still not perfect)
with an MST enabled Dell monitor.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cheers,
Rusty.
PS. My virtio-next tree is empty: DaveM took the patches I had. There might
be a virtio-rng starvation fix, but so far it's a bit voodoo so I will
get to that in the next two days or it will wait.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QzCn
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module update from Rusty Russell:
"Nothing major: support for compressing modules, and auto-tainting
params.
PS. My virtio-next tree is empty: DaveM took the patches I had. There
might be a virtio-rng starvation fix, but so far it's a bit voodoo
so I will get to that in the next two days or it will wait"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
moduleparam: Resolve missing-field-initializer warning
kbuild: handle module compression while running 'make modules_install'.
modinst: wrap long lines in order to enhance cmd_modules_install
modsign: lookup lines ending in .ko in .mod files
modpost: simplify file name generation of *.mod.c files
modpost: reduce visibility of symbols and constify r/o arrays
param: check for tainting before calling set op.
drm/i915: taint the kernel if unsafe module parameters are set
module: add module_param_unsafe and module_param_named_unsafe
module: make it possible to have unsafe, tainting module params
module: rename KERNEL_PARAM_FL_NOARG to avoid confusion
The translation from the X driver to the KMS one typo'ed a couple
of array indices, causing the HW cursor to look weird (blocky with
leaking edge colors). This fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
two core fixes
* tag 'topic/core-stuff-2014-10-03' of git://anongit.freedesktop.org/drm-intel:
drm/core: use helper to check driver features
drm/edid: Add missing interlaced flag to 576i@100 modes.
Bunch of fixes for 3.18. Major parts:
- ppgtt fixes (but full ppgtt is for 3.19) from Chris, Michel, ...
- hdmi pixel replication fixes (Clint Taylor)
- leftover i830M patches from Ville
- small things all over
* tag 'drm-intel-next-fixes-2014-10-03' of git://anongit.freedesktop.org/drm-intel: (21 commits)
drm/i915: Enable pixel replicated modes on BDW and HSW.
drm/i915: Don't spam dmesg with rps messages on vlv/chv
drm/i915: Do not leak pages when freeing userptr objects
drm/i915: Do not store the error pointer for a failed userptr registration
Revert "drm/i915/bdw: BDW Software Turbo"
drm/i915/bdw: Cleanup pre prod workarounds
drm/i915: Use EIO instead of EAGAIN for sink CRC error.
drm/i915: Extend BIOS stolen mem handling to all platform
drm/i915: Match GTT space sanity checker with implementation
drm/i915: HSW always use GGTT selector for secure batches
drm/i915: add cherryview specfic forcewake in execlists_elsp_write
drm/i915: fix another use-after-free in i915_gem_evict_everything
drm/i915: Don't reinit hpd interrupts after gpu reset
drm/i915: Wrap -EIO send-vblank event for failed pageflip in spinlock
drm/i915: Drop any active reference before unbinding
drm/i915: Objects on the unbound list may still have an active reference
drm/i915/edp: use lane count and link rate from DPCD for eDP
drm/i915/dp: add missing \n in the TPS3 debug message
drm/i915/hdmi, dp: Do not dereference the encoder in the connector destroy
drm/i915: Limit the watermark to at least 8 entries on gen2/3
...
Pull drm fixes from Dave Airlie:
"Nothing too major or scary.
One i915 regression fix, nouveau has a tmds regression fix, along with
a regression fix for the runtime pm code for optimus laptops not
restoring the display hw correctly"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: make sure display hardware is reinitialised on runtime resume
drm/nouveau: punt fbcon resume out to a workqueue
drm/nouveau: fix regression on original nv50 board
drm/nv50/disp: fix dpms regression on certain boards
drm/i915: Flush the PTEs after updating them before suspend
Adds an extra argument to radeon_bo_create, which is only used in radeon_prime.c.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not the whole world is a radeon! :-)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch replaces direct access to driver_features field
by calls to helper function.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
final regression fix for 3.17.
* tag 'drm-intel-fixes-2014-10-02' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Flush the PTEs after updating them before suspend
Linus commit 05c63c2ff2 modified the
runtime suspend/resume paths to skip over display-related tasks to
avoid locking issues on resume.
Unfortunately, this resulted in the display hardware being left in
a partially initialised state, preventing subsequent modesets from
completing.
This commit unifies the (many) suspend/resume paths, bringing back
display (and fbcon) handling in the runtime paths.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Preparation for some runtime pm fixes. Currently we skip over fbcon
suspend/resume in the runtime path, which causes issues on resume if
fbcon tries to write to the framebuffer before the BAR subdev has
been resumed to restore the BAR1 VM setup.
As we might be woken up via a sysfs connector, we are unable to call
fb_set_suspend() in the resume path as it could make its way down to
a modeset and cause all sorts of locking hilarity.
To solve this, we'll just delay the fbcon resume to a workqueue.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Xorg (and any non-DRM client really) doesn't have permission to directly
touch VRAM on nv50 and up, which the fence code prior to g84 depends on.
It's less invasive to temporarily grant it premission to do so, as it
previously did, than it is to rework fencenv50 to use the VM. That
will come later on.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Helpful for debugging as the version shows up in a
register dump.
Cc: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should never have a packet 0 in the command stream.
Dump the full command stream to help debug.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=84500
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The requirement for these was removed in:
0a16893397
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
legacy_connector_convert is used in radeon_combios.c only, so declare it as static.
Signed-off-by: Michele Curti <michele.curti@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The tables:
* supported_devices_connector_convert
* supported_devices_connector_object_id_convert
* object_connector_convert
are used in redeon_atombios.c only, so declare them as static.
Signed-off-by: Michele Curti <michele.curti@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's no longer used now that the underlying bugs are fixed.
Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Tested-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer needed now that the underlying bug was fixed in
e07929810f
(drm/radeon/dpm: fix typo in vddci setup for eg/btc).
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69721
Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not sure this was ever necessary for CI, was just done
to be on the safe side.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69721
Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not sure this was ever necessary for SI, was just done
to be on the safe side.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69721
Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer needed now that the underlying bug was fixed in
b0880e87c1
(drm/radeon/dpm: fix vddci setup typo on cayman).
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69721
Reviewed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Tested-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should allow the audio driver to get a better
idea of whether the sink is connected or not.
v2: fix copy/paste typo noticed by David Henningsson
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of that functionality is only used by r600_hdmi.c
and I'm planning to change that further.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CEA VICs 44 and 45 were missing DRM_MODE_FLAG_INTERLACE.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
fixups for nouveau and fencing
* 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux:
drm/nouveau: export reservation_object from dmabuf to ttm
drm/ttm: add reservation_object as argument to ttm_bo_init
drm: Pass dma-buf as argument to gem_prime_import_sg_table
drm/nouveau: assign fence_chan->name correctly
drm/nouveau: specify if interruptible wait is desired in nouveau_fence_sync
drm/nouveau: bump driver patchlevel to 1.2.1
Ok, here's the update core-stuff pull request with the locking fixup patch
fixed up with another patch.
* tag 'topic/core-stuff-2014-09-29' of git://anongit.freedesktop.org/drm-intel:
drm: Drop grab fpriv->fbs_lock in drm_fb_release
drm/udl: use container_of to resolve udl_fbdev from drm_fb_helper
drm/ast: use container_of to resolve ast_fbdev from drm_fb_helper
drm/gma500: use container_of to resolve psb_fbdev from drm_fb_helper
drm/qxl: use container_of to resolve qxl_fbdev from drm_fb_helper
drm/nouveau: use container_of to resolve nouveau_plane from drm_plane
drm/nouveau: use container_of to resolve nouveau_fbdev from drm_fb_helper
drm/radeon: use container_of to resolve radeon_fbdev from drm_fb_helper
drm/mgag200: use container_of to resolve mga_fbdev from drm_fb_helper
drm/cirrus: use container_of to resolve cirrus_fbdev from drm_fb_helper
drm: Improve debug output for drm_wait_one_vblank
drm: Fixup locking for universal cursor planes
drm: Don't update vblank timestamp when the counter didn't change
Haswell and later silicon has added a new pixel replication register
to the pipe timings for each transcoder. Now in addition to the
DPLL_A_MD register for the pixel clock double, we also need to write
to the TRANS_MULT_n (0x6002c) register to double the pixel data. Writing
to the DPLL only double the pixel clock.
ver2: Macro name change from MULTIPLY to PIPE_MULTI. (Daniel)
ver3: Do not set pixel multiplier if transcoder is eDP (Ville)
ver4: Macro name change to PIPE_MULT and default else pixel_multiplier
Cc: Ville =?iso-8859-1?Q?Syrj=E4l=E4?= <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Appease checkpatch and move one hunk back into the right
place that git am misplace!?]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make nouveau_fence_chan refcounted, to make trace_fence_destroy
always return the correct name without a race condition.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
This fixes a regression introduced by "drm/nouveau: rework to new fence interface"
(commit 29ba89b237).
The fence sequence should not be reset after creation, the old value is used instead.
On destruction the final value is written, to prevent another source of accidental
wraparound in case of a channel being destroyed after a hang, and unblocking any other
channel that may wait on the about-to-be-deleted channel to signal.
I'm nothing if not optimistic about any hope of recovery from that. ;-)
Reported-by: Ted Percival <ted@tedp.id.au>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Ted Percival <ted@tedp.id.au>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
