Check for CAP_SYS_ADMIN since the caller can truncate preallocated
blocks from files they do not own nor have write access to. A more
fine grained access check was considered: require the caller to
specify their own uid/gid and to use inode_permission to check for
write, but this would not catch the case of an inode not reachable
via path traversal from the callers mount namespace.
Add check for read-only filesystem to free eofblocks ioctl.
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Have eofblocks ioctl convert uid_t to kuid_t into internal structure.
Update internal filter matching to compare ids with kuid_t types.
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Use uint32 from init_user_ns for xfs internal uid/gid
representation in xfs_icdinode, xfs_dqid_t.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Use inode_capable() to check if SUID|SGID bits should be cleared to match
similar check in inode_change_ok().
The check for CAP_LINUX_IMMUTABLE was not modified since all other file
systems also check against init_user_ns rather than current_user_ns.
Only allow changing of projid from init_user_ns.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Change permission check for setting ACL to use inode_owner_or_capable()
which will additionally allow a CAP_FOWNER user in a user namespace to
be able to set an ACL on an inode covered by the user namespace mapping.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Dwight Engen <dwight.engen@oracle.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The xc_cil_lock is used for two purposes - to protect the CIL
itself, and to protect the push/commit state and lists. These are
two logically separate structures and operations, so can have their
own locks. This means that pushing on the CIL and the commit wait
ordering won't contend for a lock with other transactions that are
completing concurrently. As the CIL insertion is the hottest path
throught eh CIL, this is a big win.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that all the log item preparation and formatting is done under
the CIL lock, we can get rid of the intermediate log vector chain
used to track items to be inserted into the CIL.
We can already find all the items to be committed from the
transaction handle, so as long as we attach the log vectors to the
item before we insert the items into the CIL, we don't need to
create a log vector chain to pass around.
This means we can move all the item insertion code into and optimise
it into a pair of simple passes across all the items in the
transaction. The first pass does the formatting and accounting, the
second inserts them all into the CIL.
We keep this two pass split so that we can separate the CIL
insertion - which must be done under the CIL spinlock - from the
formatting. We could insert each item into the CIL with a single
pass, but that massively increases the number of times we have to
grab the CIL spinlock. It is much more efficient (and hence
scalable) to do a batch operation and insert all objects in a single
lock grab.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that we have the size of the log vector that has been allocated,
we can determine if we need to allocate a new log vector for
formatting and insertion. We only need to allocate a new vector if
it won't fit into the existing buffer.
However, we need to hold the CIL context lock while we do this so
that we can't race with a push draining the currently queued log
vectors. It is safe to do this as long as we do GFP_NOFS allocation
to avoid avoid memory allocation recursing into the filesystem.
Hence we can safely overwrite the existing log vector on the CIL if
it is large enough to hold all the dirty regions of the current
item.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now that we have the size of the object before the formatting pass
is called, we can allocation the log vector and it's buffer in a
single allocation rather than two separate allocations.
Store the size of the allocated buffer in the log vector so that
we potentially avoid allocation for future modifications of the
object.
While touching this code, remove the IOP_FORMAT definition.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
To begin optimising the CIL commit process, we need to have IOP_SIZE
return both the number of vectors and the size of the data pointed
to by the vectors. This enables us to calculate the size ofthe
memory allocation needed before the formatting step and reduces the
number of memory allocations per item by one.
While there, kill the IOP_SIZE macro.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xlog_find_tail() currently leaks a bp on one error path.
There is no error target, so manually free the bp before
returning the error.
Found by Coverity.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xlog_find_zeroed() currently leaks a bp on one error path.
Using the bp_err: target resolves this.
Found by Coverity.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_attr_node_addname()'s error handling tests whether it
should free "state" in the out: error handling label:
out:
if (state)
xfs_da_state_free(state);
but an earlier free doesn't set state to NULL afterwards; this
could lead to a double free. Fix it by setting state to NULL
after it's freed.
This was found by Coverity.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Replace roundup() with roundup_64() as we calculate min_logblks
with 64-bit divisions. Hence, call roundup() will cause the
following error while compiling a 32-bit kernel:
fs/built-in.o: In function `xfs_log_calc_minimum_size':
fs/xfs/xfs_log_rlimit.c:140: undefined reference to `__udivdi3'
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Validate log space during log mount stage, the underlying function
will drop a warning message via syslog in critical level if the log
space is too small or too large.
[ dchinner: For CRC enable filesystems, abort the mounting of the
filesystem as mkfs should never make a log too small for the given
filesystem configuration. ]
[ dchinner: make a note of the fact that the log size limits in
block counts are in units of filesystem blocks, not basic blocks. ]
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add source files for xfs_log_rlimit.c The new file is used for log
size calculations and validation shared with userspace.
[dchinner: xfs_log_calc_max_attrsetm_res() does not modify the
tr_attrsetm reservation, just calculates the maximum. ]
[dchinner: rework loop in xfs_log_get_max_trans_res() ]
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Refactor xlog_ticket_alloc() to extract a new helper, i.e.
xfs_log_calc_unit_res().
This helper would be used to calculate the total log reservation
size by adding extra log operation/transation headers for a new
log ticket.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Get rid of all XFS_XXX_LOG_RES() macros since they are obsoleted now.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
With the new xfs_trans_res structure has been introduced, the log
reservation size, log count as well as log flags are pre-initialized
at mount time. So it's time to refine xfs_trans_reserve() interface
to be more neat.
Also, introduce a new helper M_RES() to return a pointer to the
mp->m_resv structure to simplify the input.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
tr_writeid is defined at mp->m_resv structure, however, it does not
really being used when it should be..
This patch changes it to tr_writeid to fetch the correct log
reservation size.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
A preparation step.
For now fsync_ts transaction use the pre-calculated log reservation
size of tr_swrite. This patch introduce a new item tr_fsyncts to
mp->m_reservations structure so that we can fetch the log
reservation value for it in a same manner to others.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Introduce a new structure xfs_trans_res to hold transaction
reservation item info per log ticket.
We also need to improve xfs_trans_resv_calc() by initializing the
log count as well as log flags for permanent log reservation.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The struct xfs_perag has many kernel-only definitions in it,
requiring a __KERNEL__ guard so userspace can use it to. Move it to
xfs_mount.h so that it it kernel-only, and let userspace redefine
it's own version of the structure containing only what it needs.
This gets rid of another __KERNEL__ check in the XFS header files.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_types.h is shared with userspace, so having kernel specific
types defined in it is problematic. Move all the kernel specific
defines to xfs_linux.h so we can remove the __KERNEL__ guards from
xfs_types.h.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Because it is only used within the kernel.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
It's actually an ifndef section, which means it is only included in
userspace. however, it's deep within the libxfs code, so it's
unlikely that the condition checked in userspace can actually occur
(search an empty leaf) through the libxfs interfaces. i.e. if it can
happen in usrspace, it can happen in the kernel, so remove it from
userspace too....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There is no reason the remaining kernel-only debug code needs to
remain kernel-only. Kill the __KERNEL__ part of the defines, and let
userspace handle the debug code appropriately.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Userspace running debug builds is relatively rare, so there's need
to special case the allocation algorithm code coverage debug switch.
As it is, userspace defines random numbers to 0, so invert the
logic of the switch so it is effectively a no-op in userspace.
This kills another couple of __KERNEL__ users.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Neither kernel or userspace support shared read-only mounts, so
don't bother special casing the support check to be different
between kernel and userspace. The same check can be used as neither
like it...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
So we don't need xfs_dfrag.h in userspace anymore, move the extent
swap ioctl structure definition to xfs_fs.h where most of the other
ioctl structure definitions are.
Now that we don't need separate files for extent swapping, separate
the basic file descriptor checking code to xfs_ioctl.c, and the code
that does the extent swap operation to xfs_bmap_util.c. This
cleanly separates the user interface code from the physical
mechanism used to do the extent swap.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There are a few small helper functions in xfs_util, all related to
xfs_inode modifications. Move them all to xfs_inode.c so all
xfs_inode operations are consiolidated in the one place.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Move the rename code to xfs_inode.c to continue consolidating
all the kernel xfs_inode operations in the one place.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Now we have xfs_inode.c for holding kernel-only XFS inode
operations, move all the inode operations from xfs_vnodeops.c to
this new file as it holds another set of kernel-only inode
operations. The name of this file traces back to the days of Irix
and it's vnodes which we don't have anymore.
Essentially this move consolidates the inode locking functions
and a bunch of XFS inode operations into the one file. Eventually
the high level functions will be merged into the VFS interface
functions in xfs_iops.c.
This leaves only internal preallocation, EOF block manipulation and
hole punching functions in vnodeops.c. Move these to xfs_bmap_util.c
where we are already consolidating various in-kernel physical extent
manipulation and querying functions.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Some of the code shared with userspace causes compilation warnings
from things turned off in the kernel code, such as differences in
variable signedness. Fix those issues.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
These come from syncing the shared userspace and kernel code. Small
whitespace and trivial cleanups.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There is a bunch of code in xfs_bmap.c that is kernel specific and
not shared with userspace. To minimise the difference between the
kernel and userspace code, shift this unshared code to
xfs_bmap_util.c, and the declarations to xfs_bmap_util.h.
The biggest issue here is xfs_bmap_finish() - userspace has it's own
definition of this function, and so we need to move it out of
xfs_bmap.[ch]. This means several other files need to include
xfs_bmap_util.h as well.
It also introduces and interesting dance for the stack switching
code in xfs_bmapi_allocate(). The stack switching/workqueue code is
actually moved to xfs_bmap_util.c, so that userspace can simply use
a #define in a header file to connect the dots without needing to
know about the stack switch code at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_mount.c is shared with userspace, but the only functions that
are shared are to do with physical superblock manipulations. This
means that less than 25% of the xfs_mount.c code is actually shared
with userspace. Move all the superblock functions to xfs_sb.c and
share that instead with libxfs.
Note that this will leave all the in-core transaction related
superblock counter modifications in xfs_mount.c as none of that is
shared with userspace. With a few more small changes, xfs_mount.h
won't need to be shared with userspace anymore, either.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The remote symlink format definition and manipulation needs to be
shared with userspace, but the in-kernel interfaces do not. Split
the remote symlink format handling out into xfs_symlink_remote.[ch]
fo it can easily be shared with userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The attribute inactivation code is not used by userspace, so like
the attribute listing, split it out into a separate file to minimise
the differences between the filesystem shared with libxfs in
userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The attribute listing code is not used by userspace, so like the
directory readdir code, split it out into a separate file to
minimise the differences between the filesystem shared with libxfs
in userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Many of the definitions within xfs_dir2_priv.h are needed in
userspace outside libxfs. Definitions within xfs_dir2_priv.h are
wholly contained within libxfs, so we need to shuffle some of the
definitions around to keep consistency across files shared between
user and kernel space.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The directory readdir code is not used by userspace, but it is
intermingled with files that are shared with userspace. This makes
it difficult to compare the differences between the userspac eand
kernel files are the userspace files don't have the getdents code in
them. Move all the kernel getdents code to a separate file to bring
the shared content between userspace and kernel files closer
together.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The only thing remaining in xfs_inode.[ch] are the operations that
read, write or verify physical inodes in their underlying buffers.
Move all this code to xfs_inode_buf.[ch] and so we can stop sharing
xfs_inode.[ch] with userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The inode fork definitions are a combination of on-disk format
definition and in-memory tracking and manipulation. They are both
shared with userspace, so move them all into their own file so
sharing is easy to do and track. This removes all inode fork
related information from xfs_inode.h.
Do the same for the all the C code that currently resides in
xfs_inode.c for the same reason.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The transaction reservation size calculations is used by both kernel
and userspace, but most of the transaction code in xfs_trans.c is
kernel specific. Split all the transaction reservation code out into
it's own files to make sharing with userspace simpler. This just
leaves kernel-only definitions in xfs_trans.h, so it doesn't need to
be shared with userspace anymore, either.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Little things like exported functions, __KERNEL__ protections, and
so on that ensure user and kernel shared headers are identical.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There are a lot of quota flag definitions that are shared by user
and kernel space. Move them all to xfs_quota_defs.h so we can
unshare xfs_quota.h and remove the __KERNEL__ regions from it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There are quite a few realtime device definitions shared with
userspace. Move them from xfs_rtalloc.h to xfs_rt_alloc_defs.h
so we don't need to share xfs_rtalloc.h with userspace anymore.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
