Now that btrfs_wq_submit_bio is never called for synchronous I/O,
the hipri_workers workqueue is not used anymore and can be removed.
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Syzbot reports a reproducible ASSERT() when using rescue=usebackuproot
mount option on a corrupted fs.
The full report can be found here:
https://syzkaller.appspot.com/bug?extid=c4614eae20a166c25bf0
BTRFS error (device loop0: state C): failed to load root csum
assertion failed: !tmp, in fs/btrfs/disk-io.c:1103
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3664!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 3608 Comm: syz-executor356 Not tainted 6.0.0-rc7-syzkaller-00029-g3800a713b607 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
RIP: 0010:assertfail+0x1a/0x1c fs/btrfs/ctree.h:3663
RSP: 0018:ffffc90003aaf250 EFLAGS: 00010246
RAX: 0000000000000032 RBX: 0000000000000000 RCX: f21c13f886638400
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffff888021c640a0 R08: ffffffff816bd38d R09: ffffed10173667f1
R10: ffffed10173667f1 R11: 1ffff110173667f0 R12: dffffc0000000000
R13: ffff8880229c21f7 R14: ffff888021c64060 R15: ffff8880226c0000
FS: 0000555556a73300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055a2637d7a00 CR3: 00000000709c4000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
btrfs_global_root_insert+0x1a7/0x1b0 fs/btrfs/disk-io.c:1103
load_global_roots_objectid+0x482/0x8c0 fs/btrfs/disk-io.c:2467
load_global_roots fs/btrfs/disk-io.c:2501 [inline]
btrfs_read_roots fs/btrfs/disk-io.c:2528 [inline]
init_tree_roots+0xccb/0x203c fs/btrfs/disk-io.c:2939
open_ctree+0x1e53/0x33df fs/btrfs/disk-io.c:3574
btrfs_fill_super+0x1c6/0x2d0 fs/btrfs/super.c:1456
btrfs_mount_root+0x885/0x9a0 fs/btrfs/super.c:1824
legacy_get_tree+0xea/0x180 fs/fs_context.c:610
vfs_get_tree+0x88/0x270 fs/super.c:1530
fc_mount fs/namespace.c:1043 [inline]
vfs_kern_mount+0xc9/0x160 fs/namespace.c:1073
btrfs_mount+0x3d3/0xbb0 fs/btrfs/super.c:1884
[CAUSE]
Since the introduction of global roots, we handle
csum/extent/free-space-tree roots as global roots, even if no
extent-tree-v2 feature is enabled.
So for regular csum/extent/fst roots, we load them into
fs_info::global_root_tree rb tree.
And we should not expect any conflicts in that rb tree, thus we have an
ASSERT() inside btrfs_global_root_insert().
But rescue=usebackuproot can break the assumption, as we will try to
load those trees again and again as long as we have bad roots and have
backup roots slot remaining.
So in that case we can have conflicting roots in the rb tree, and
triggering the ASSERT() crash.
[FIX]
We can safely remove that ASSERT(), as the caller will properly put the
offending root.
To make further debugging easier, also add two explicit error messages:
- Error message for conflicting global roots
- Error message when using backup roots slot
Reported-by: syzbot+a694851c6ab28cbcfb9c@syzkaller.appspotmail.com
Fixes: abed4aaae4 ("btrfs: track the csum, extent, and free space trees in a rb tree")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Test case btrfs/027 would crash with subpage (64K page size, 4K
sectorsize) with the following dying messages:
debug: map_length=16384 length=65536 type=metadata|raid6(0x104)
assertion failed: map_length >= length, in fs/btrfs/volumes.c:8093
------------[ cut here ]------------
kernel BUG at fs/btrfs/messages.c:259!
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
btrfs_assertfail+0x28/0x2c [btrfs]
btrfs_map_repair_block+0x150/0x2b8 [btrfs]
btrfs_repair_io_failure+0xd4/0x31c [btrfs]
btrfs_read_extent_buffer+0x150/0x16c [btrfs]
read_tree_block+0x38/0xbc [btrfs]
read_tree_root_path+0xfc/0x1bc [btrfs]
btrfs_get_root_ref.part.0+0xd4/0x3a8 [btrfs]
open_ctree+0xa30/0x172c [btrfs]
btrfs_mount_root+0x3c4/0x4a4 [btrfs]
legacy_get_tree+0x30/0x60
vfs_get_tree+0x28/0xec
vfs_kern_mount.part.0+0x90/0xd4
vfs_kern_mount+0x14/0x28
btrfs_mount+0x114/0x418 [btrfs]
legacy_get_tree+0x30/0x60
vfs_get_tree+0x28/0xec
path_mount+0x3e0/0xb64
__arm64_sys_mount+0x200/0x2d8
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x60/0x11c
do_el0_svc+0x38/0x98
el0_svc+0x40/0xa8
el0t_64_sync_handler+0xf4/0x120
el0t_64_sync+0x190/0x194
Code: aa0403e2 b0fff060 91010000 959c2024 (d4210000)
[CAUSE]
In btrfs/027 we test RAID6 with missing devices, in this particular
case, we're repairing a metadata at the end of a data stripe.
But at btrfs_repair_io_failure(), we always pass a full PAGE for repair,
and for subpage case this can cross stripe boundary and lead to the
above BUG_ON().
This metadata repair code is always there, since the introduction of
subpage support, but this can trigger BUG_ON() after the bio split
ability at btrfs_map_bio().
[FIX]
Instead of passing the old PAGE_SIZE, we calculate the correct length
based on the eb size and page size for both regular and subpage cases.
CC: stable@vger.kernel.org # 6.3+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When compiling on a MIPS 64-bit machine we get these warnings:
In file included from ./arch/mips/include/asm/cacheflush.h:13,
from ./include/linux/cacheflush.h:5,
from ./include/linux/highmem.h:8,
from ./include/linux/bvec.h:10,
from ./include/linux/blk_types.h:10,
from ./include/linux/blkdev.h:9,
from fs/btrfs/disk-io.c:7:
fs/btrfs/disk-io.c: In function ‘csum_tree_block’:
fs/btrfs/disk-io.c💯34: error: array subscript 1 is above array bounds of ‘struct page *[1]’ [-Werror=array-bounds]
100 | kaddr = page_address(buf->pages[i]);
| ~~~~~~~~~~^~~
./include/linux/mm.h:2135:48: note: in definition of macro ‘page_address’
2135 | #define page_address(page) lowmem_page_address(page)
| ^~~~
cc1: all warnings being treated as errors
We can check if i overflows to solve the problem. However, this doesn't make
much sense, since i == 1 and num_pages == 1 doesn't execute the body of the loop.
In addition, i < num_pages can also ensure that buf->pages[i] will not cross
the boundary. Unfortunately, this doesn't help with the problem observed here:
gcc still complains.
To fix this add a compile-time condition for the extent buffer page
array size limit, which would eventually lead to eliminating the whole
for loop.
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Our CI system caught a lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
6.3.0-rc7+ #1167 Not tainted
------------------------------------------------------
kswapd0/46 is trying to acquire lock:
ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120
but task is already holding lock:
ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
fs_reclaim_acquire+0xa5/0xe0
kmem_cache_alloc+0x31/0x2c0
alloc_extent_state+0x1d/0xd0
__clear_extent_bit+0x2e0/0x4f0
try_release_extent_mapping+0x216/0x280
btrfs_release_folio+0x2e/0x90
invalidate_inode_pages2_range+0x397/0x470
btrfs_cleanup_dirty_bgs+0x9e/0x210
btrfs_cleanup_one_transaction+0x22/0x760
btrfs_commit_transaction+0x3b7/0x13a0
create_subvol+0x59b/0x970
btrfs_mksubvol+0x435/0x4f0
__btrfs_ioctl_snap_create+0x11e/0x1b0
btrfs_ioctl_snap_create_v2+0xbf/0x140
btrfs_ioctl+0xa45/0x28f0
__x64_sys_ioctl+0x88/0xc0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
-> #0 (sb_internal#2){++++}-{0:0}:
__lock_acquire+0x1435/0x21a0
lock_acquire+0xc2/0x2b0
start_transaction+0x401/0x730
btrfs_commit_inode_delayed_inode+0x5f/0x120
btrfs_evict_inode+0x292/0x3d0
evict+0xcc/0x1d0
inode_lru_isolate+0x14d/0x1e0
__list_lru_walk_one+0xbe/0x1c0
list_lru_walk_one+0x58/0x80
prune_icache_sb+0x39/0x60
super_cache_scan+0x161/0x1f0
do_shrink_slab+0x163/0x340
shrink_slab+0x1d3/0x290
shrink_node+0x300/0x720
balance_pgdat+0x35c/0x7a0
kswapd+0x205/0x410
kthread+0xf0/0x120
ret_from_fork+0x29/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(sb_internal#2);
lock(fs_reclaim);
lock(sb_internal#2);
*** DEADLOCK ***
3 locks held by kswapd0/46:
#0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0
#1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290
#2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0
stack backtrace:
CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x58/0x90
check_noncircular+0xd6/0x100
? save_trace+0x3f/0x310
? add_lock_to_list+0x97/0x120
__lock_acquire+0x1435/0x21a0
lock_acquire+0xc2/0x2b0
? btrfs_commit_inode_delayed_inode+0x5f/0x120
start_transaction+0x401/0x730
? btrfs_commit_inode_delayed_inode+0x5f/0x120
btrfs_commit_inode_delayed_inode+0x5f/0x120
btrfs_evict_inode+0x292/0x3d0
? lock_release+0x134/0x270
? __pfx_wake_bit_function+0x10/0x10
evict+0xcc/0x1d0
inode_lru_isolate+0x14d/0x1e0
__list_lru_walk_one+0xbe/0x1c0
? __pfx_inode_lru_isolate+0x10/0x10
? __pfx_inode_lru_isolate+0x10/0x10
list_lru_walk_one+0x58/0x80
prune_icache_sb+0x39/0x60
super_cache_scan+0x161/0x1f0
do_shrink_slab+0x163/0x340
shrink_slab+0x1d3/0x290
shrink_node+0x300/0x720
balance_pgdat+0x35c/0x7a0
kswapd+0x205/0x410
? __pfx_autoremove_wake_function+0x10/0x10
? __pfx_kswapd+0x10/0x10
kthread+0xf0/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
This happens because when we abort the transaction in the transaction
commit path we call invalidate_inode_pages2_range on our block group
cache inodes (if we have space cache v1) and any delalloc inodes we may
have. The plain invalidate_inode_pages2_range() call passes through
GFP_KERNEL, which makes sense in most cases, but not here. Wrap these
two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to
make sure we don't end up with the fs reclaim dependency under the
transaction dependency.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously clear_cache mount option would simply disable free-space-tree
feature temporarily then re-enable it to rebuild the whole free space
tree.
But this is problematic for block-group-tree feature, as we have an
artificial dependency on free-space-tree feature.
If we go the existing method, after clearing the free-space-tree
feature, we would flip the filesystem to read-only mode, as we detect a
super block write with block-group-tree but no free-space-tree feature.
This patch would change the behavior by properly rebuilding the free
space tree without disabling this feature, thus allowing clear_cache
mount option to work with block group tree.
Now we can mount a filesystem with block-group-tree feature and
clear_mount option:
$ mkfs.btrfs -O block-group-tree /dev/test/scratch1 -f
$ sudo mount /dev/test/scratch1 /mnt/btrfs -o clear_cache
$ sudo dmesg -t | head -n 5
BTRFS info (device dm-1): force clearing of disk cache
BTRFS info (device dm-1): using free space tree
BTRFS info (device dm-1): auto enabling async discard
BTRFS info (device dm-1): rebuilding free space tree
BTRFS info (device dm-1): checking UUID tree
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function wait_dev_flush() tests for the BTRFS_DEV_STATE_FLUSH_SENT
bit and then clears it separately. Instead, use test_and_clear_bit().
Though we don't need to do the atomic test and clear, it's following a
common pattern.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The flush error code is maintained in btrfs_device::last_flush_error, so
there is no point in returning it in wait_dev_flush() when it is not being
used. Instead, we can return a boolean value.
Note that even though btrfs_device::last_flush_error may not be used, we
will keep it for now.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
check_barrier_error() is almost a single line function, and just calls
btrfs_check_rw_degradable(). Instead, open code it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We parallelize the flush command across devices using our own code,
write_dev_flush() sends the flush command to each device and
wait_dev_flush() waits for the flush to complete on all devices. Errors
from each device are recorded at device->last_flush_error and reset to
BLK_STS_OK in write_dev_flush() and to the error, if any, in
wait_dev_flush(). These functions are called from barrier_all_devices().
This patch consolidates the use of device->last_flush_error in
write_dev_flush() and wait_dev_flush() to remove it from
barrier_all_devices().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this logic encapsulated in btrfs_should_throttle_delayed_refs()
where we try to estimate if running the current amount of delayed
references we have will take more than half a second, and if so, the
caller btrfs_should_throttle_delayed_refs() should do something to
prevent more and more delayed refs from being accumulated.
This logic was added in commit 0a2b2a844a ("Btrfs: throttle delayed
refs better") and then further refined in commit a79b7d4b3e ("Btrfs:
async delayed refs"). The idea back then was that the caller of
btrfs_should_throttle_delayed_refs() would release its transaction
handle (by calling btrfs_end_transaction()) when that function returned
true, then btrfs_end_transaction() would trigger an async job to run
delayed references in a workqueue, and later start/join a transaction
again and do more work.
However we don't run delayed references asynchronously anymore, that
was removed in commit db2462a6ad ("btrfs: don't run delayed refs in
the end transaction logic"). That makes the logic that tries to estimate
how long we will take to run our current delayed references, at
btrfs_should_throttle_delayed_refs(), pointless as we don't take any
action to run delayed references anymore. We do have other type of
throttling, which consists of checking the size and reserved space of
the delayed and global block reserves, as well as if fluhsing delayed
references for the current transaction was already started, etc - this
is all done by btrfs_should_end_transaction(), and the only user of
btrfs_should_throttle_delayed_refs() does periodically call
btrfs_should_end_transaction().
So remove btrfs_should_throttle_delayed_refs() and the infrastructure
that keeps track of the average time used for running delayed references,
as well as adapting btrfs_truncate_inode_items() to call
btrfs_check_space_for_delayed_refs() instead.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The DREW lock uses percpu variable to track lock counters and for that
it needs to allocate the structure. In btrfs_read_tree_root() or
btrfs_init_fs_root() this may add another error case or requires the
NOFS scope protection.
One way is to preallocate the structure as was suggested in
https://lore.kernel.org/linux-btrfs/20221214021125.28289-1-robbieko@synology.com/
We may avoid the allocation altogether if we don't use the percpu
variables but an atomic for the writer counter. This should not make any
difference, the DREW lock is used for truncate and NOCOW writes along
with other IO operations.
The percpu counter for writers has been there since the original commit
8257b2dc3c "Btrfs: introduce btrfs_{start, end}_nocow_write() for
each subvolume". The reason could be to avoid hammering the same
cacheline from all the readers but then the writers do that anyway.
Signed-off-by: David Sterba <dsterba@suse.com>
If no discard mount option is specified, including the NODISCARD option,
we make the async discard the default option then we don't have to call
the clear_opt again to clear the NODISCARD flag. Though this makes no
difference, that the call is redundant has been pointed out several
times so we better remove it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently open_ctree() still uses two variables for error handling, err
and ret. This can be confusing and missing some errors and does not
conform to current coding style.
This patch will fix the problems by:
- Use only ret for error handling
- Add proper ret assignment
Originally we rely on the default value (-EINVAL) of err to handle
errors, but that doesn't really reflects the error.
This will change it use the correct error number for the following
call sites:
* subpage_info allocation
* btrfs_free_extra_devids()
* btrfs_check_rw_degradable()
* cleaner_kthread allocation
* transaction_kthread allocation
- Add an extra ASSERT()
To make sure we error out instead of returning 0.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move the remaining code that deals with initializing the btree
inode into btrfs_init_btree_inode instead of splitting it between
that helpers and its only caller.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we mount the file system we do something like this:
while (1) {
lookup fs roots;
for (i = 0; i < num_roots; i++) {
ret = btrfs_orphan_cleanup(roots[i]);
if (ret)
break;
btrfs_put_root(roots[i]);
}
}
for (; i < num_roots; i++)
btrfs_put_root(roots[i]);
As you can see if we break in that inner loop we just go back to the
outer loop and lose the fact that we have to drop references on the
remaining roots we looked up. Fix this by making an out label and
jumping to that on error so we don't leak a reference to the roots we
looked up.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The BTRFS_FS_CSUM_IMPL_FAST flag is currently set whenever a non-generic
crc32c is detected, which is the incorrect check if the file system uses
a different checksumming algorithm. Refactor the code to only check
this if crc32c is actually used. Note that in an ideal world the
information if an algorithm is hardware accelerated or not should be
provided by the crypto API instead, but that's left for another day.
CC: stable@vger.kernel.org # 5.4.x: c8a5f8ca9a: btrfs: print checksum type and implementation at mount time
CC: stable@vger.kernel.org # 5.4.x
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_clear_buffer_dirty just does the test_clear_bit() and then calls
clear_extent_buffer_dirty and does the dirty metadata accounting.
Combine this into clear_extent_buffer_dirty and make the result
btrfs_clear_buffer_dirty.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_clean_tree_block is a misnomer, it's just
clear_extent_buffer_dirty with some extra accounting around it. Rename
this to btrfs_clear_buffer_dirty to make it more clear it belongs with
it's setter, btrfs_mark_buffer_dirty.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're passing in the trans into btrfs_clean_tree_block, we can
easily roll in the handling of the !trans case and replace all
occurrences of
if (test_and_clear_bit(EXTENT_BUFFER_DIRTY, &eb->bflags))
clear_extent_buffer_dirty(eb);
with
btrfs_tree_lock(eb);
btrfs_clean_tree_block(eb);
btrfs_tree_unlock(eb);
We need the lock because if we are actually dirty we need to make sure
we aren't racing with anything that's starting writeout currently. This
also makes sure that we're accounting fs_info->dirty_metadata_bytes
appropriately.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We check the header generation in the extent buffer against the current
running transaction id to see if it's safe to clear DIRTY on this
buffer. Generally speaking if we're clearing the buffer dirty we're
holding the transaction open, but in the case of cleaning up an aborted
transaction we don't, so we have extra checks in that path to check the
transid. To allow for a future cleanup go ahead and pass in the trans
handle so we don't have to rely on ->running_transaction being set.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Call btrfs_submit_bio and btrfs_submit_compressed_read directly from
submit_one_bio now that all additional functionality has moved into
btrfs_submit_bio.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_submit_bio can derive it trivially from bbio->inode, so stop
bothering in the callers.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To allow splitting bios in btrfs_submit_bio, btree_csum_one_bio needs to
be able to handle cloned bios. As btree_csum_one_bio is always called
before handing the bio to the block layer that is trivially done by using
bio_for_each_segment instead of bio_for_each_segment_all. Also switch
the function to take a btrfs_bio and use that to derive the fs_info.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of letting the callers of btrfs_submit_bio deal with checksumming
the (meta)data in the bio and making decisions on when to offload the
checksumming to the bio, leave that to btrfs_submit_bio. Do do so the
existing btrfs_submit_bio function is split into an upper and a lower
half, so that the lower half can be offloaded to a workqueue.
Note that this changes the behavior for direct writes to raid56 volumes so
that async checksum offloading is not skipped when more I/O is expected.
This runs counter to the argument explaining why it was done, although I
can't measure any affects of the change. Commits later in this series
will make sure the entire direct writes is offloaded to the workqueue
at once and thus make sure it is sent to the raid56 code from a single
thread.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
To prepare for further bio submission changes btrfs_csum_one_bio
should be able to take all it's arguments from the btrfs_bio structure.
It can always use the bbio->inode already, and once the compression code
is updated to set ->file_offset that one can be used unconditionally
as well instead of looking at the page mapping now that btrfs doesn't
allow ordered extents to span discontiguous data ranges.
The only slightly tricky bit is the one_ordered flag set by the
compressed writes. Replace that one with the driver private bio
flag, which gets cleared before the bio is handed off to the block layer
so that we don't get in the way of driver use.
Note: this leaves an argument and a flag to btrfs_wq_submit_bio unused.
But that whole mechanism will be removed in its current form in the
next patch.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The submit helpers are now trivial and can be called directly. Note
that btree_csum_one_bio has to be moved up in the file a bit to avoid a
forward declaration.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This flag is unused now, so remove it. Re-expand the mirror_num field
to 8 bits, and move it to the I/O completion internal section of the
structure.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There quite a few spelling mistakes as found using codespell. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Since the introduction of per-fs feature sysfs interface
(/sys/fs/btrfs/<UUID>/features/), the content of that directory is never
updated.
Thus for the following case, that directory will not show the new
features like RAID56:
# mkfs.btrfs -f $dev1 $dev2 $dev3
# mount $dev1 $mnt
# btrfs balance start -f -mconvert=raid5 $mnt
# ls /sys/fs/btrfs/$uuid/features/
extended_iref free_space_tree no_holes skinny_metadata
While after unmount and mount, we got the correct features:
# umount $mnt
# mount $dev1 $mnt
# ls /sys/fs/btrfs/$uuid/features/
extended_iref free_space_tree no_holes raid56 skinny_metadata
[CAUSE]
Because we never really try to update the content of per-fs features/
directory.
We had an attempt to update the features directory dynamically in commit
14e46e0495 ("btrfs: synchronize incompat feature bits with sysfs
files"), but unfortunately it get reverted in commit e410e34fad
("Revert "btrfs: synchronize incompat feature bits with sysfs files"").
The problem in the original patch is, in the context of
btrfs_create_chunk(), we can not afford to update the sysfs group.
The exported but never utilized function, btrfs_sysfs_feature_update()
is the leftover of such attempt. As even if we go sysfs_update_group(),
new files will need extra memory allocation, and we have no way to
specify the sysfs update to go GFP_NOFS.
[FIX]
This patch will address the old problem by doing asynchronous sysfs
update in the cleaner thread.
This involves the following changes:
- Make __btrfs_(set|clear)_fs_(incompat|compat_ro) helpers to set
BTRFS_FS_FEATURE_CHANGED flag when needed
- Update btrfs_sysfs_feature_update() to use sysfs_update_group()
And drop unnecessary arguments.
- Call btrfs_sysfs_feature_update() in cleaner_kthread
If we have the BTRFS_FS_FEATURE_CHANGED flag set.
- Wake up cleaner_kthread in btrfs_commit_transaction if we have
BTRFS_FS_FEATURE_CHANGED flag
By this, all the previously dangerous call sites like
btrfs_create_chunk() need no new changes, as above helpers would
have already set the BTRFS_FS_FEATURE_CHANGED flag.
The real work happens at cleaner_kthread, thus we pay the cost of
delaying the update to sysfs directory, but the delayed time should be
small enough that end user can not distinguish though it might get
delayed if the cleaner thread is busy with removing subvolumes or
defrag.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With -Wmaybe-uninitialized compiler complains about ret being possibly
uninitialized, which isn't possible as the WQ_ constants are set only
from our code, however we can handle the default case and get rid of the
warning.
The value is set to BLK_STS_IOERR so it does not issue any IO and could
be potentially detected, but this is basically a "cannot happen" error.
To catch any problems during development use the assert.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ set the error in default: ]
Signed-off-by: David Sterba <dsterba@suse.com>
When syncing the log, if we fail to write log tree extent buffers, we mark
the log for a full commit and abort the transaction. However we don't need
to abort the transaction, all we really need to do is to make sure no one
can commit a superblock pointing to new log tree roots. Just because we
got a failure writing extent buffers for a log tree, it does not mean we
will also fail to do a transaction commit.
One particular case is if due to a bug somewhere, when writing log tree
extent buffers, the tree checker detects some corruption and the writeout
fails because of that. Aborting the transaction can be very disruptive for
a user, specially if the issue happened on a root filesystem. One example
is the scenario in the Link tag below, where an isolated corruption on log
tree leaves was causing transaction aborts when syncing the log.
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Even with commit 81d5d61454 ("btrfs: enhance unsupported compat RO
flags handling"), btrfs can still mount a fs with unsupported compat_ro
flags read-only, then remount it RW:
# btrfs ins dump-super /dev/loop0 | grep compat_ro_flags -A 3
compat_ro_flags 0x403
( FREE_SPACE_TREE |
FREE_SPACE_TREE_VALID |
unknown flag: 0x400 )
# mount /dev/loop0 /mnt/btrfs
mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
dmesg(1) may have more information after failed mount system call.
^^^ RW mount failed as expected ^^^
# dmesg -t | tail -n5
loop0: detected capacity change from 0 to 1048576
BTRFS: device fsid cb5b82f5-0fdd-4d81-9b4b-78533c324afa devid 1 transid 7 /dev/loop0 scanned by mount (1146)
BTRFS info (device loop0): using crc32c (crc32c-intel) checksum algorithm
BTRFS info (device loop0): using free space tree
BTRFS error (device loop0): cannot mount read-write because of unknown compat_ro features (0x403)
BTRFS error (device loop0): open_ctree failed
# mount /dev/loop0 -o ro /mnt/btrfs
# mount -o remount,rw /mnt/btrfs
^^^ RW remount succeeded unexpectedly ^^^
[CAUSE]
Currently we use btrfs_check_features() to check compat_ro flags against
our current mount flags.
That function get reused between open_ctree() and btrfs_remount().
But for btrfs_remount(), the super block we passed in still has the old
mount flags, thus btrfs_check_features() still believes we're mounting
read-only.
[FIX]
Replace the existing @sb argument with @is_rw_mount.
As originally we only use @sb to determine if the mount is RW.
Now it's callers' responsibility to determine if the mount is RW, and
since there are only two callers, the check is pretty simple:
- caller in open_ctree()
Just pass !sb_rdonly().
- caller in btrfs_remount()
Pass !(*flags & SB_RDONLY), as our check should be against the new
flags.
Now we can correctly reject the RW remount:
# mount /dev/loop0 -o ro /mnt/btrfs
# mount -o remount,rw /mnt/btrfs
mount: /mnt/btrfs: mount point not mounted or bad option.
dmesg(1) may have more information after failed mount system call.
# dmesg -t | tail -n 1
BTRFS error (device loop0: state M): cannot mount read-write because of unknown compat_ro features (0x403)
Reported-by: Chung-Chiang Cheng <shepjeng@gmail.com>
Fixes: 81d5d61454 ("btrfs: enhance unsupported compat RO flags handling")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
From a recent regression report, we found that after commit 947a629988
("btrfs: move tree block parentness check into
validate_extent_buffer()") if we have a level mismatch (false alert
though), there is no error message at all.
This makes later debugging harder. This patch will add the proper error
message for such case.
Link: https://lore.kernel.org/linux-btrfs/CABXGCsNzVxo4iq-tJSGm_kO1UggHXgq6CdcHDL=z5FL4njYXSQ@mail.gmail.com/
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
repair_io_failure ties directly into all the glory low-level details of
mapping a bio with a logic address to the actual physical location.
Move it right below btrfs_submit_bio to keep all the related logic
together.
Also move btrfs_repair_eb_io_failure to its caller in disk-io.c now that
repair_io_failure is available in a header.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The code used by btrfs_submit_bio only interacts with the rest of
volumes.c through __btrfs_map_block (which itself is a more generic
version of two exported helpers) and does not really have anything
to do with volumes.c. Create a new bio.c file and a bio.h header
going along with it for the btrfs_bio-based storage layer, which
will grow even more going forward.
Also update the file with my copyright notice given that a large
part of the moved code was written or rewritten by me.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
If dev-replace failed to re-construct its data/metadata, the kernel
message would be incorrect for the missing device:
BTRFS info (device dm-1): dev_replace from <missing disk> (devid 2) to /dev/mapper/test-scratch2 started
BTRFS error (device dm-1): failed to rebuild valid logical 38862848 for dev (efault)
Note the above "dev (efault)" of the second line.
While the first line is properly reporting "<missing disk>".
[CAUSE]
Although dev-replace is using btrfs_dev_name(), the heavy lifting work
is still done by scrub (scrub is reused by both dev-replace and regular
scrub).
Unfortunately scrub code never uses btrfs_dev_name() helper, as it's
only declared locally inside dev-replace.c.
[FIX]
Fix the output by:
- Move the btrfs_dev_name() helper to volumes.h
- Use btrfs_dev_name() to replace open-coded rcu_str_deref() calls
Only zoned code is not touched, as I'm not familiar with degraded
zoned code.
- Constify return value and parameter
Now the output looks pretty sane:
BTRFS info (device dm-1): dev_replace from <missing disk> (devid 2) to /dev/mapper/test-scratch2 started
BTRFS error (device dm-1): failed to rebuild valid logical 38862848 for dev <missing disk>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BACKGROUND]
Although both btrfs metadata and data has their read time verification
done at endio time (btrfs_validate_metadata_buffer() and
btrfs_verify_data_csum()), metadata has extra verification, mostly
parentness check including first key/transid/owner_root/level, done at
read_tree_block() and btrfs_read_extent_buffer().
On the other hand, all the data verification is done at endio context.
[ENHANCEMENT]
This patch will make a new union in btrfs_bio, taking the space of the
old data checksums, thus it will not increase the memory usage.
With that extra btrfs_tree_parent_check inside btrfs_bio, we can just
pass the check parameter into read_extent_buffer_pages(), and before
submitting the bio, we can copy the check structure into btrfs_bio.
And finally at endio time, we can grab btrfs_bio::parent_check and pass
it to validate_extent_buffer(), to move the remaining checks into it.
This brings the following benefits:
- Much simpler btrfs_read_extent_buffer()
Now it only needs to iterate through all mirrors.
- Simpler read-time transid check
Previously we go verify_parent_transid() after reading out the extent
buffer.
Now the transid check is done inside the endio function, no other
code can modify the content.
Thus no need to use the extent lock anymore.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several different tree block parentness check parameters used
across several helpers:
- level
Mandatory
- transid
Under most cases it's mandatory, but there are several backref cases
which skips this check.
- owner_root
- first_key
Utilized by most top-down tree search routine. Otherwise can be
skipped.
Those four members are not always mandatory checks, and some of them are
the same u64, which means if some arguments got swapped compiler will
not catch it.
Furthermore if we're going to further expand the parentness check, we
need to modify quite some helpers just to add one more parameter.
This patch will concentrate all these members into a structure called
btrfs_tree_parent_check, and pass that structure for the following
helpers:
- btrfs_read_extent_buffer()
- read_tree_block()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers except one pass NULL, so the parameter can be dropped and
the inode::io_tree initialization can be open coded.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The async bio submit is for internal interfaces so we should use the
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After previous patches the unused parameters can be removed from
btree_submit_bio_start and btrfs_submit_bio_start as they don't need to
conform to the extent_submit_bio_start_t typedef.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a callback function parameter for btrfs_wq_submit_bio that can
be one of: metadata, buffered data, direct io data. The callback
abstraction is unnecessary as we have all functions available.
Replace the parameter with a command that leads to a direct call in
run_one_async_start. The called functions can be then simplified and we
can also remove the extent_submit_bio_start_t typedef.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have switched all raid56 workload to submit-and-wait method,
there is no use for btrfs_fs_info::endio_raid56_workers workqueue and
btrfs_raid_bio::end_io_work.
Remove them to save some memory.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into super.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into scrub.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
