mirror of
https://github.com/torvalds/linux.git
synced 2024-11-10 14:11:52 +00:00
8b671fe1a8
1305 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Yu Zhao
|
8b671fe1a8 |
mm/mglru: fix div-by-zero in vmpressure_calc_level()
evict_folios() uses a second pass to reclaim folios that have gone through
page writeback and become clean before it finishes the first pass, since
folio_rotate_reclaimable() cannot handle those folios due to the
isolation.
The second pass tries to avoid potential double counting by deducting
scan_control->nr_scanned. However, this can result in underflow of
nr_scanned, under a condition where shrink_folio_list() does not increment
nr_scanned, i.e., when folio_trylock() fails.
The underflow can cause the divisor, i.e., scale=scanned+reclaimed in
vmpressure_calc_level(), to become zero, resulting in the following crash:
[exception RIP: vmpressure_work_fn+101]
process_one_work at ffffffffa3313f2b
Since scan_control->nr_scanned has no established semantics, the potential
double counting has minimal risks. Therefore, fix the problem by not
deducting scan_control->nr_scanned in evict_folios().
Link: https://lkml.kernel.org/r/20240711191957.939105-1-yuzhao@google.com
Fixes:
|
||
Barry Song
|
e5a119c4a6 |
mm/vmscan: drop checking if _deferred_list is empty before using TTU_SYNC
The optimization of list_empty(&folio->_deferred_list) aimed to prevent
increasing the PTL duration when a large folio is partially unmapped, for
example, from subpage 0 to subpage (nr - 2).
But Ryan's commit
|
||
Dan Schatzberg
|
68cd9050d8 |
mm: add swappiness= arg to memory.reclaim
Allow proactive reclaimers to submit an additional swappiness=<val> argument to memory.reclaim. This overrides the global or per-memcg swappiness setting for that reclaim attempt. For example: echo "2M swappiness=0" > /sys/fs/cgroup/memory.reclaim will perform reclaim on the rootcg with a swappiness setting of 0 (no swap) regardless of the vm.swappiness sysctl setting. Userspace proactive reclaimers use the memory.reclaim interface to trigger reclaim. The memory.reclaim interface does not allow for any way to effect the balance of file vs anon during proactive reclaim. The only approach is to adjust the vm.swappiness setting. However, there are a few reasons we look to control the balance of file vs anon during proactive reclaim, separately from reactive reclaim: * Swapout should be limited to manage SSD write endurance. In near-OOM situations we are fine with lots of swap-out to avoid OOMs. As these are typically rare events, they have relatively little impact on write endurance. However, proactive reclaim runs continuously and so its impact on SSD write endurance is more significant. Therefore it is desireable to control swap-out for proactive reclaim separately from reactive reclaim * Some userspace OOM killers like systemd-oomd[1] support OOM killing on swap exhaustion. This makes sense if the swap exhaustion is triggered due to reactive reclaim but less so if it is triggered due to proactive reclaim (e.g. one could see OOMs when free memory is ample but anon is just particularly cold). Therefore, it's desireable to have proactive reclaim reduce or stop swap-out before the threshold at which OOM killing occurs. In the case of Meta's Senpai proactive reclaimer, we adjust vm.swappiness before writes to memory.reclaim[2]. This has been in production for nearly two years and has addressed our needs to control proactive vs reactive reclaim behavior but is still not ideal for a number of reasons: * vm.swappiness is a global setting, adjusting it can race/interfere with other system administration that wishes to control vm.swappiness. In our case, we need to disable Senpai before adjusting vm.swappiness. * vm.swappiness is stateful - so a crash or restart of Senpai can leave a misconfigured setting. This requires some additional management to record the "desired" setting and ensure Senpai always adjusts to it. With this patch, we avoid these downsides of adjusting vm.swappiness globally. [1]https://www.freedesktop.org/software/systemd/man/latest/systemd-oomd.service.html [2]https://github.com/facebookincubator/oomd/blob/main/src/oomd/plugins/Senpai.cpp#L585-L598 Link: https://lkml.kernel.org/r/20240103164841.2800183-3-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Suggested-by: Yosry Ahmed <yosryahmed@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Chris Li <chrisl@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Yue Zhao <findns94@gmail.com> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Nhat Pham <nphamcs@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Dan Schatzberg
|
410abb20ac |
mm: add defines for min/max swappiness
Patch series "Add swappiness argument to memory.reclaim", v6. This patch proposes augmenting the memory.reclaim interface with a swappiness=<val> argument that overrides the swappiness value for that instance of proactive reclaim. Userspace proactive reclaimers use the memory.reclaim interface to trigger reclaim. The memory.reclaim interface does not allow for any way to effect the balance of file vs anon during proactive reclaim. The only approach is to adjust the vm.swappiness setting. However, there are a few reasons we look to control the balance of file vs anon during proactive reclaim, separately from reactive reclaim: * Swapout should be limited to manage SSD write endurance. In near-OOM situations we are fine with lots of swap-out to avoid OOMs. As these are typically rare events, they have relatively little impact on write endurance. However, proactive reclaim runs continuously and so its impact on SSD write endurance is more significant. Therefore it is desireable to control swap-out for proactive reclaim separately from reactive reclaim * Some userspace OOM killers like systemd-oomd[1] support OOM killing on swap exhaustion. This makes sense if the swap exhaustion is triggered due to reactive reclaim but less so if it is triggered due to proactive reclaim (e.g. one could see OOMs when free memory is ample but anon is just particularly cold). Therefore, it's desireable to have proactive reclaim reduce or stop swap-out before the threshold at which OOM killing occurs. In the case of Meta's Senpai proactive reclaimer, we adjust vm.swappiness before writes to memory.reclaim[2]. This has been in production for nearly two years and has addressed our needs to control proactive vs reactive reclaim behavior but is still not ideal for a number of reasons: * vm.swappiness is a global setting, adjusting it can race/interfere with other system administration that wishes to control vm.swappiness. In our case, we need to disable Senpai before adjusting vm.swappiness. * vm.swappiness is stateful - so a crash or restart of Senpai can leave a misconfigured setting. This requires some additional management to record the "desired" setting and ensure Senpai always adjusts to it. With this patch, we avoid these downsides of adjusting vm.swappiness globally. Previously, this exact interface addition was proposed by Yosry[3]. In response, Roman proposed instead an interface to specify precise file/anon/slab reclaim amounts[4]. More recently Huan also proposed this as well[5] and others similarly questioned if this was the proper interface. Previous proposals sought to use this to allow proactive reclaimers to effectively perform a custom reclaim algorithm by issuing proactive reclaim with different settings to control file vs anon reclaim (e.g. to only reclaim anon from some applications). Responses argued that adjusting swappiness is a poor interface for custom reclaim. In contrast, I argue in favor of a swappiness setting not as a way to implement custom reclaim algorithms but rather to bias the balance of anon vs file due to differences of proactive vs reactive reclaim. In this context, swappiness is the existing interface for controlling this balance and this patch simply allows for it to be configured differently for proactive vs reactive reclaim. Specifying explicit amounts of anon vs file pages to reclaim feels inappropriate for this prupose. Proactive reclaimers are un-aware of the relative age of file vs anon for a cgroup which makes it difficult to manage proactive reclaim of different memory pools. A proactive reclaimer would need some amount of anon reclaim attempts separate from the amount of file reclaim attempts which seems brittle given that it's difficult to observe the impact. [1]https://www.freedesktop.org/software/systemd/man/latest/systemd-oomd.service.html [2]https://github.com/facebookincubator/oomd/blob/main/src/oomd/plugins/Senpai.cpp#L585-L598 [3]https://lore.kernel.org/linux-mm/CAJD7tkbDpyoODveCsnaqBBMZEkDvshXJmNdbk51yKSNgD7aGdg@mail.gmail.com/ [4]https://lore.kernel.org/linux-mm/YoPHtHXzpK51F%2F1Z@carbon/ [5]https://lore.kernel.org/lkml/20231108065818.19932-1-link@vivo.com/ This patch (of 2): We use the constants 0 and 200 in a few places in the mm code when referring to the min and max swappiness. This patch adds MIN_SWAPPINESS and MAX_SWAPPINESS #defines to improve clarity. There are no functional changes. Link: https://lkml.kernel.org/r/20240103164841.2800183-1-schatzberg.dan@gmail.com Link: https://lkml.kernel.org/r/20240103164841.2800183-2-schatzberg.dan@gmail.com Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Chris Li <chrisl@kernel.org> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Tejun Heo <tj@kernel.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yue Zhao <findns94@gmail.com> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Roman Gushchin
|
87024f5837 |
mm: memcg: rename soft limit reclaim-related functions
Rename exported function related to the softlimit reclaim to have memcg1_ prefix. Link: https://lkml.kernel.org/r/20240625005906.106920-4-roman.gushchin@linux.dev Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Kefeng Wang
|
593a10dabe |
mm: refactor folio_undo_large_rmappable()
Folios of order <= 1 are not in deferred list, the check of order is added
into folio_undo_large_rmappable() from commit
|
||
Honggyu Kim
|
8f75267d22 |
mm: rename alloc_demote_folio to alloc_migrate_folio
The alloc_demote_folio can also be used for general migration including both demotion and promotion so it'd be better to rename it from alloc_demote_folio to alloc_migrate_folio. Link: https://lkml.kernel.org/r/20240614030010.751-3-honggyu.kim@sk.com Signed-off-by: Honggyu Kim <honggyu.kim@sk.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Gregory Price <gregory.price@memverge.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Hyeongtak Ji <hyeongtak.ji@sk.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Honggyu Kim
|
a00ce85af2 |
mm: make alloc_demote_folio externally invokable for migration
Patch series "DAMON based tiered memory management for CXL memory", v6.
Introduction
============
With the advent of CXL/PCIe attached DRAM, which will be called simply as
CXL memory in this cover letter, some systems are becoming more
heterogeneous having memory systems with different latency and bandwidth
characteristics. They are usually handled as different NUMA nodes in
separate memory tiers and CXL memory is used as slow tiers because of its
protocol overhead compared to local DRAM.
In this kind of systems, we need to be careful placing memory pages on
proper NUMA nodes based on the memory access frequency. Otherwise, some
frequently accessed pages might reside on slow tiers and it makes
performance degradation unexpectedly. Moreover, the memory access
patterns can be changed at runtime.
To handle this problem, we need a way to monitor the memory access
patterns and migrate pages based on their access temperature. The
DAMON(Data Access MONitor) framework and its DAMOS(DAMON-based Operation
Schemes) can be useful features for monitoring and migrating pages. DAMOS
provides multiple actions based on DAMON monitoring results and it can be
used for proactive reclaim, which means swapping cold pages out with
DAMOS_PAGEOUT action, but it doesn't support migration actions such as
demotion and promotion between tiered memory nodes.
This series supports two new DAMOS actions; DAMOS_MIGRATE_HOT for
promotion from slow tiers and DAMOS_MIGRATE_COLD for demotion from fast
tiers. This prevents hot pages from being stuck on slow tiers, which
makes performance degradation and cold pages can be proactively demoted to
slow tiers so that the system can increase the chance to allocate more hot
pages to fast tiers.
The DAMON provides various tuning knobs but we found that the proactive
demotion for cold pages is especially useful when the system is running
out of memory on its fast tier nodes.
Our evaluation result shows that it reduces the performance slowdown
compared to the default memory policy from 11% to 3~5% when the system
runs under high memory pressure on its fast tier DRAM nodes.
DAMON configuration
===================
The specific DAMON configuration doesn't have to be in the scope of this
patch series, but some rough idea is better to be shared to explain the
evaluation result.
The DAMON provides many knobs for fine tuning but its configuration file
is generated by HMSDK[3]. It includes gen_config.py script that generates
a json file with the full config of DAMON knobs and it creates multiple
kdamonds for each NUMA node when the DAMON is enabled so that it can run
hot/cold based migration for tiered memory.
Evaluation Workload
===================
The performance evaluation is done with redis[4], which is a widely used
in-memory database and the memory access patterns are generated via
YCSB[5]. We have measured two different workloads with zipfian and latest
distributions but their configs are slightly modified to make memory usage
higher and execution time longer for better evaluation.
The idea of evaluation using these migrate_{hot,cold} actions covers
system-wide memory management rather than partitioning hot/cold pages of a
single workload. The default memory allocation policy creates pages to
the fast tier DRAM node first, then allocates newly created pages to the
slow tier CXL node when the DRAM node has insufficient free space. Once
the page allocation is done then those pages never move between NUMA
nodes. It's not true when using numa balancing, but it is not the scope
of this DAMON based tiered memory management support.
If the working set of redis can be fit fully into the DRAM node, then the
redis will access the fast DRAM only. Since the performance of DRAM only
is faster than partially accessing CXL memory in slow tiers, this
environment is not useful to evaluate this patch series.
To make pages of redis be distributed across fast DRAM node and slow CXL
node to evaluate our migrate_{hot,cold} actions, we pre-allocate some cold
memory externally using mmap and memset before launching redis-server. We
assumed that there are enough amount of cold memory in datacenters as
TMO[6] and TPP[7] papers mentioned.
The evaluation sequence is as follows.
1. Turn on DAMON with DAMOS_MIGRATE_COLD action for DRAM node and
DAMOS_MIGRATE_HOT action for CXL node. It demotes cold pages on DRAM
node and promotes hot pages on CXL node in a regular interval.
2. Allocate a huge block of cold memory by calling mmap and memset at
the fast tier DRAM node, then make the process sleep to make the fast
tier has insufficient space for redis-server.
3. Launch redis-server and load prebaked snapshot image, dump.rdb. The
redis-server consumes 52GB of anon pages and 33GB of file pages, but
due to the cold memory allocated at 2, it fails allocating the entire
memory of redis-server on the fast tier DRAM node so it partially
allocates the remaining on the slow tier CXL node. The ratio of
DRAM:CXL depends on the size of the pre-allocated cold memory.
4. Run YCSB to make zipfian or latest distribution of memory accesses to
redis-server, then measure its execution time when it's completed.
5. Repeat 4 over 50 times to measure the average execution time for each
run.
6. Increase the cold memory size then repeat goes to 2.
For each test at 4 took about a minute so repeating it 50 times almost
took about 1 hour for each test with a specific cold memory from 440GB to
500GB in 10GB increments for each evaluation. So it took about more than
10 hours for both zipfian and latest workloads to get the entire
evaluation results. Repeating the same test set multiple times doesn't
show much difference so I think it might be enough to make the result
reliable.
Evaluation Results
==================
All the result values are normalized to DRAM-only execution time because
the workload cannot be faster than DRAM-only unless the workload hits the
peak bandwidth but our redis test doesn't go beyond the bandwidth limit.
So the DRAM-only execution time is the ideal result without affected by
the gap between DRAM and CXL performance difference. The NUMA node
environment is as follows.
node0 - local DRAM, 512GB with a CPU socket (fast tier)
node1 - disabled
node2 - CXL DRAM, 96GB, no CPU attached (slow tier)
The following is the result of generating zipfian distribution to
redis-server and the numbers are averaged by 50 times of execution.
1. YCSB zipfian distribution read only workload
memory pressure with cold memory on node0 with 512GB of local DRAM.
====================+================================================+=========
| cold memory occupied by mmap and memset |
| 0G 440G 450G 460G 470G 480G 490G 500G |
====================+================================================+=========
Execution time normalized to DRAM-only values | GEOMEAN
--------------------+------------------------------------------------+---------
DRAM-only | 1.00 - - - - - - - | 1.00
CXL-only | 1.19 - - - - - - - | 1.19
default | - 1.00 1.05 1.08 1.12 1.14 1.18 1.18 | 1.11
DAMON tiered | - 1.03 1.03 1.03 1.03 1.03 1.07 *1.05 | 1.04
DAMON lazy | - 1.04 1.03 1.04 1.05 1.06 1.06 *1.06 | 1.05
====================+================================================+=========
CXL usage of redis-server in GB | AVERAGE
--------------------+------------------------------------------------+---------
DRAM-only | 0.0 - - - - - - - | 0.0
CXL-only | 51.4 - - - - - - - | 51.4
default | - 0.6 10.6 20.5 30.5 40.5 47.6 50.4 | 28.7
DAMON tiered | - 0.6 0.5 0.4 0.7 0.8 7.1 5.6 | 2.2
DAMON lazy | - 0.5 3.0 4.5 5.4 6.4 9.4 9.1 | 5.5
====================+================================================+=========
Each test result is based on the execution environment as follows.
DRAM-only: redis-server uses only local DRAM memory.
CXL-only: redis-server uses only CXL memory.
default: default memory policy(MPOL_DEFAULT).
numa balancing disabled.
DAMON tiered: DAMON enabled with DAMOS_MIGRATE_COLD for DRAM
nodes and DAMOS_MIGRATE_HOT for CXL nodes.
DAMON lazy: same as DAMON tiered, but turn on DAMON just
before making memory access request via YCSB.
The above result shows the "default" execution time goes up as the size of
cold memory is increased from 440G to 500G because the more cold memory
used, the more CXL memory is used for the target redis workload and this
makes the execution time increase.
However, "DAMON tiered" and other DAMON results show less slowdown because
the DAMOS_MIGRATE_COLD action at DRAM node proactively demotes
pre-allocated cold memory to CXL node and this free space at DRAM
increases more chance to allocate hot or warm pages of redis-server to
fast DRAM node. Moreover, DAMOS_MIGRATE_HOT action at CXL node also
promotes hot pages of redis-server to DRAM node actively.
As a result, it makes more memory of redis-server stay in DRAM node
compared to "default" memory policy and this makes the performance
improvement.
Please note that the result numbers of "DAMON tiered" and "DAMON lazy" at
500G are marked with * stars, which means their test results are replaced
with reproduced tests that didn't have OOM issue.
That was needed because sometimes the test processes get OOM when DRAM has
insufficient space. The DAMOS_MIGRATE_HOT doesn't kick reclaim but just
gives up migration when there is not enough space at DRAM side. The
problem happens when there is competition between normal allocation and
migration and the migration is done before normal allocation, then the
completely unrelated normal allocation can trigger reclaim, which incurs
OOM.
Because of this issue, I have also tested more cases with
"demotion_enabled" flag enabled to make such reclaim doesn't trigger OOM,
but just demote reclaimed pages. The following test results show more
tests with "kswapd" marked.
2. YCSB zipfian distribution read only workload (with demotion_enabled true)
memory pressure with cold memory on node0 with 512GB of local DRAM.
====================+================================================+=========
| cold memory occupied by mmap and memset |
| 0G 440G 450G 460G 470G 480G 490G 500G |
====================+================================================+=========
Execution time normalized to DRAM-only values | GEOMEAN
--------------------+------------------------------------------------+---------
DAMON tiered | - 1.03 1.03 1.03 1.03 1.03 1.07 1.05 | 1.04
DAMON lazy | - 1.04 1.03 1.04 1.05 1.06 1.06 1.06 | 1.05
DAMON tiered kswapd | - 1.03 1.03 1.03 1.03 1.02 1.02 1.03 | 1.03
DAMON lazy kswapd | - 1.04 1.04 1.04 1.03 1.05 1.04 1.05 | 1.04
====================+================================================+=========
CXL usage of redis-server in GB | AVERAGE
--------------------+------------------------------------------------+---------
DAMON tiered | - 0.6 0.5 0.4 0.7 0.8 7.1 5.6 | 2.2
DAMON lazy | - 0.5 3.0 4.5 5.4 6.4 9.4 9.1 | 5.5
DAMON tiered kswapd | - 0.0 0.0 0.4 0.5 0.1 0.8 1.0 | 0.4
DAMON lazy kswapd | - 4.2 4.6 5.3 1.7 6.8 8.1 5.8 | 5.2
====================+================================================+=========
Each test result is based on the exeuction environment as follows.
DAMON tiered: same as before
DAMON lazy: same as before
DAMON tiered kswapd: same as DAMON tiered, but turn on
/sys/kernel/mm/numa/demotion_enabled to make
kswapd or direct reclaim does demotion.
DAMON lazy kswapd: same as DAMON lazy, but turn on
/sys/kernel/mm/numa/demotion_enabled to make
kswapd or direct reclaim does demotion.
The "DAMON tiered kswapd" and "DAMON lazy kswapd" didn't trigger OOM at
all unlike other tests because kswapd and direct reclaim from DRAM node
can demote reclaimed pages to CXL node independently from DAMON actions
and their results are slightly better than without having
"demotion_enabled".
In summary, the evaluation results show that DAMON memory management with
DAMOS_MIGRATE_{HOT,COLD} actions reduces the performance slowdown compared
to the "default" memory policy from 11% to 3~5% when the system runs with
high memory pressure on its fast tier DRAM nodes.
Having these DAMOS_MIGRATE_HOT and DAMOS_MIGRATE_COLD actions can make
tiered memory systems run more efficiently under high memory pressures.
This patch (of 7):
The alloc_demote_folio can be used out of vmscan.c so it'd be better to
remove static keyword from it.
Link: https://lkml.kernel.org/r/20240614030010.751-1-honggyu.kim@sk.com
Link: https://lkml.kernel.org/r/20240614030010.751-2-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Shakeel Butt
|
462966dc7d |
mm: vmscan: reset sc->priority on retry
The commit 6be5e186fd65 ("mm: vmscan: restore incremental cgroup
iteration") added a retry reclaim heuristic to iterate all the cgroups
before returning an unsuccessful reclaim but missed to reset the
sc->priority. Let's fix it.
Link: https://lkml.kernel.org/r/20240529154911.3008025-1-shakeel.butt@linux.dev
Fixes: 6be5e186fd65 ("mm: vmscan: restore incremental cgroup iteration")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reported-by: syzbot+17416257cb95200cba44@syzkaller.appspotmail.com
Tested-by: syzbot+17416257cb95200cba44@syzkaller.appspotmail.com
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Johannes Weiner
|
b82b530740 |
mm: vmscan: restore incremental cgroup iteration
Currently, reclaim always walks the entire cgroup tree in order to ensure
fairness between groups. While overreclaim is limited in shrink_lruvec(),
many of our systems have a sizable number of active groups, and an even
bigger number of idle cgroups with cache left behind by previous jobs; the
mere act of walking all these cgroups can impose significant latency on
direct reclaimers.
In the past, we've used a save-and-restore iterator that enabled
incremental tree walks over multiple reclaim invocations. This ensured
fairness, while keeping the work of individual reclaimers small.
However, in edge cases with a lot of reclaim concurrency, individual
reclaimers would sometimes not see enough of the cgroup tree to make
forward progress and (prematurely) declare OOM. Consequently we switched
to comprehensive walks in
|
||
Baolin Wang
|
0d648dd5c8 |
mm: drop the 'anon_' prefix for swap-out mTHP counters
The mTHP swap related counters: 'anon_swpout' and 'anon_swpout_fallback' are confusing with an 'anon_' prefix, since the shmem can swap out non-anonymous pages. So drop the 'anon_' prefix to keep consistent with the old swap counter names. This is needed in 6.10-rcX to avoid having an inconsistent ABI out in the field. Link: https://lkml.kernel.org/r/7a8989c13299920d7589007a30065c3e2c19f0e0.1716431702.git.baolin.wang@linux.alibaba.com Fixes: |
||
SeongJae Park
|
c961bddb7d |
mm/vmscan: remove ignore_references argument of reclaim_folio_list()
All reclaim_folio_list() callers are passing 'true' for 'ignore_references' parameter. In other words, the parameter is not really being used. Simplify the code by removing the parameter. Link: https://lkml.kernel.org/r/20240429224451.67081-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
14f5be2a2d |
mm/vmscan: remove ignore_references argument of reclaim_pages()
All reclaim_pages() callers are setting 'ignore_references' parameter 'true'. In other words, the parameter is not really being used. Remove the argument to make it simple. Link: https://lkml.kernel.org/r/20240429224451.67081-4-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Barry Song
|
d0f048ac39 |
mm: add per-order mTHP anon_swpout and anon_swpout_fallback counters
This helps to display the fragmentation situation of the swapfile, knowing the proportion of how much we haven't split large folios. So far, we only support non-split swapout for anon memory, with the possibility of expanding to shmem in the future. So, we add the "anon" prefix to the counter names. Link: https://lkml.kernel.org/r/20240412114858.407208-3-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chris Li <chrisl@kernel.org> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Kairui Song <kasong@tencent.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Ryan Roberts
|
5ed890ce51 |
mm: vmscan: avoid split during shrink_folio_list()
Now that swap supports storing all mTHP sizes, avoid splitting large folios before swap-out. This benefits performance of the swap-out path by eliding split_folio_to_list(), which is expensive, and also sets us up for swapping in large folios in a future series. If the folio is partially mapped, we continue to split it since we want to avoid the extra IO overhead and storage of writing out pages uneccessarily. THP_SWPOUT and THP_SWPOUT_FALLBACK counters should continue to count events only for PMD-mappable folios to avoid user confusion. THP_SWPOUT already has the appropriate guard. Add a guard for THP_SWPOUT_FALLBACK. It may be appropriate to add per-size counters in future. Link: https://lkml.kernel.org/r/20240408183946.2991168-7-ryan.roberts@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Barry Song <v-songbaohua@oppo.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Chris Li <chrisl@kernel.org> Cc: Gao Xiang <xiang@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Barry Song
|
73bc32875e |
mm: hold PTL from the first PTE while reclaiming a large folio
Within try_to_unmap_one(), page_vma_mapped_walk() races with other PTE modifications preceded by pte clear. While iterating over PTEs of a large folio, it only starts acquiring PTL from the first valid (present) PTE. PTE modifications can temporarily set PTEs to pte_none. Consequently, the initial PTEs of a large folio might be skipped in try_to_unmap_one(). For example, for an anon folio, if we skip PTE0, we may have PTE0 which is still present, while PTE1 ~ PTE(nr_pages - 1) are swap entries after try_to_unmap_one(). So folio will be still mapped, the folio fails to be reclaimed and is put back to LRU in this round. This also breaks up PTEs optimization such as CONT-PTE on this large folio and may lead to accident folio_split() afterwards. And since a part of PTEs are now swap entries, accessing those parts will introduce overhead - do_swap_page. Although the kernel can withstand all of the above issues, the situation still seems quite awkward and warrants making it more ideal. The same race also occurs with small folios, but they have only one PTE, thus, it won't be possible for them to be partially unmapped. This patch holds PTL from PTE0, allowing us to avoid reading PTE values that are in the process of being transformed. With stable PTE values, we can ensure that this large folio is either completely reclaimed or that all PTEs remain untouched in this round. A corner case is that if we hold PTL from PTE0 and most initial PTEs have been really unmapped before that, we may increase the duration of holding PTL. Thus we only apply this optimization to folios which are still entirely mapped (not in deferred_split list). [akpm@linux-foundation.org: rewrap comment, per Matthew] Link: https://lkml.kernel.org/r/20240306095219.71086-1-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Chris Li <chrisl@kernel.org> Cc: Chuanhua Han <hanchuanhua@oppo.com> Cc: Gao Xiang <xiang@kernel.org> Cc: Huang, Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Baolin Wang
|
e42dfe4e0a |
mm: record the migration reason for struct migration_target_control
Patch series "make the hugetlb migration strategy consistent", v2. As discussed in previous thread [1], there is an inconsistency when handling hugetlb migration. When handling the migration of freed hugetlb, it prevents fallback to other NUMA nodes in alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use hugetlb, it allows fallback to other NUMA nodes in alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool and might result in unexpected failures when node bound workloads doesn't get what is asssumed available. This patchset tries to make the hugetlb migration strategy more clear and consistent. Please find details in each patch. [1] https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/ This patch (of 2): To support different hugetlb allocation strategies during hugetlb migration based on various migration reasons, record the migration reason in the migration_target_control structure as a preparation. Link: https://lkml.kernel.org/r/cover.1709719720.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/7b95d4981e07211f57139fc5b1f7ce91b920cee4.1709719720.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Andrew Morton
|
5e28061128 | Merge branch 'master' into mm-stable | ||
Byungchul Park
|
d221dd5fea |
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
With cache_trim_mode on, reclaim logic doesn't bother reclaiming anon
pages. However, it should be more careful to use the mode because it's
going to prevent anon pages from being reclaimed even if there are a huge
number of anon pages that are cold and should be reclaimed. Even worse,
that leads kswapd_failures to reach MAX_RECLAIM_RETRIES and stopping
kswapd from functioning until direct reclaim eventually works to resume
kswapd.
So kswapd needs to retry its scan priority loop with cache_trim_mode off
again if the mode doesn't work for reclaim.
The problematic behavior can be reproduced by:
CONFIG_NUMA_BALANCING enabled
sysctl_numa_balancing_mode set to NUMA_BALANCING_MEMORY_TIERING
numa node0 (8GB local memory, 16 CPUs)
numa node1 (8GB slow tier memory, no CPUs)
Sequence:
1) echo 3 > /proc/sys/vm/drop_caches
2) To emulate the system with full of cold memory in local DRAM, run
the following dummy program and never touch the region:
mmap(0, 8 * 1024 * 1024 * 1024, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_PRIVATE | MAP_POPULATE, -1, 0);
3) Run any memory intensive work e.g. XSBench.
4) Check if numa balancing is working e.i. promotion/demotion.
5) Iterate 1) ~ 4) until numa balancing stops.
With this, you could see that promotion/demotion are not working because
kswapd has stopped due to ->kswapd_failures >= MAX_RECLAIM_RETRIES.
Interesting vmstat delta's differences between before and after are like:
+-----------------------+-------------------------------+
| interesting vmstat | before | after |
+-----------------------+-------------------------------+
| nr_inactive_anon | 321935 | 1664772 |
| nr_active_anon | 1780700 | 437834 |
| nr_inactive_file | 30425 | 40882 |
| nr_active_file | 14961 | 3012 |
| pgpromote_success | 356 | 1293122 |
| pgpromote_candidate | 21953245 | 1824148 |
| pgactivate | 1844523 | 3311907 |
| pgdeactivate | 50634 |
|
||
Matthew Wilcox (Oracle)
|
47932e7048 |
mm: remove folio from deferred split list before uncharging it
When freeing a large folio, we must remove it from the deferred split list before we uncharge it as each memcg has its own deferred split list (with associated lock) and removing a folio from the deferred split list while holding the wrong lock will corrupt that list and cause various related problems. Link: https://lore.kernel.org/linux-mm/367a14f7-340e-4b29-90ae-bc3fcefdd5f4@arm.com/ Link: https://lkml.kernel.org/r/20240311191835.312162-1-willy@infradead.org Fixes: |
||
|
Matthew Wilcox (Oracle)
|
29f3843026 |
mm: free folios directly in move_folios_to_lru()
The few folios which can't be moved to the LRU list (because their refcount dropped to zero) used to be returned to the caller to dispose of. Make this simpler to call by freeing the folios directly through free_unref_folios(). Link: https://lkml.kernel.org/r/20240227174254.710559-13-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
bc2ff4cbc3 |
mm: free folios in a batch in shrink_folio_list()
Use free_unref_page_batch() to free the folios. This may increase the number of IPIs from calling try_to_unmap_flush() more often, but that's going to be very workload-dependent. It may even reduce the number of IPIs as we now batch-free large folios instead of freeing them one at a time. Link: https://lkml.kernel.org/r/20240227174254.710559-12-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: David Hildenbrand <david@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Barry Song
|
2864f3d0f5 |
mm: madvise: pageout: ignore references rather than clearing young
While doing MADV_PAGEOUT, the current code will clear PTE young so that
vmscan won't read young flags to allow the reclamation of madvised folios
to go ahead. It seems we can do it by directly ignoring references, thus
we can remove tlb flush in madvise and rmap overhead in vmscan.
Regarding the side effect, in the original code, if a parallel thread runs
side by side to access the madvised memory with the thread doing madvise,
folios will get a chance to be re-activated by vmscan (though the time gap
is actually quite small since checking PTEs is done immediately after
clearing PTEs young). But with this patch, they will still be reclaimed.
But this behaviour doing PAGEOUT and doing access at the same time is
quite silly like DoS. So probably, we don't need to care. Or ignoring
the new access during the quite small time gap is even better.
For DAMON's DAMOS_PAGEOUT based on physical address region, we still keep
its behaviour as is since a physical address might be mapped by multiple
processes. MADV_PAGEOUT based on virtual address is actually much more
aggressive on reclamation. To untouch paddr's DAMOS_PAGEOUT, we simply
pass ignore_references as false in reclaim_pages().
A microbench as below has shown 6% decrement on the latency of
MADV_PAGEOUT,
#define PGSIZE 4096
main()
{
int i;
#define SIZE 512*1024*1024
volatile long *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
for (i = 0; i < SIZE/sizeof(long); i += PGSIZE / sizeof(long))
p[i] = 0x11;
madvise(p, SIZE, MADV_PAGEOUT);
}
w/o patch w/ patch
root@10:~# time ./a.out root@10:~# time ./a.out
real 0m49.634s real 0m46.334s
user 0m0.637s user 0m0.648s
sys 0m47.434s sys 0m44.265s
Link: https://lkml.kernel.org/r/20240226005739.24350-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Vlastimil Babka
|
803de9000f |
mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations
Sven reports an infinite loop in __alloc_pages_slowpath() for costly order
__GFP_RETRY_MAYFAIL allocations that are also GFP_NOIO. Such combination
can happen in a suspend/resume context where a GFP_KERNEL allocation can
have __GFP_IO masked out via gfp_allowed_mask.
Quoting Sven:
1. try to do a "costly" allocation (order > PAGE_ALLOC_COSTLY_ORDER)
with __GFP_RETRY_MAYFAIL set.
2. page alloc's __alloc_pages_slowpath tries to get a page from the
freelist. This fails because there is nothing free of that costly
order.
3. page alloc tries to reclaim by calling __alloc_pages_direct_reclaim,
which bails out because a zone is ready to be compacted; it pretends
to have made a single page of progress.
4. page alloc tries to compact, but this always bails out early because
__GFP_IO is not set (it's not passed by the snd allocator, and even
if it were, we are suspending so the __GFP_IO flag would be cleared
anyway).
5. page alloc believes reclaim progress was made (because of the
pretense in item 3) and so it checks whether it should retry
compaction. The compaction retry logic thinks it should try again,
because:
a) reclaim is needed because of the early bail-out in item 4
b) a zonelist is suitable for compaction
6. goto 2. indefinite stall.
(end quote)
The immediate root cause is confusing the COMPACT_SKIPPED returned from
__alloc_pages_direct_compact() (step 4) due to lack of __GFP_IO to be
indicating a lack of order-0 pages, and in step 5 evaluating that in
should_compact_retry() as a reason to retry, before incrementing and
limiting the number of retries. There are however other places that
wrongly assume that compaction can happen while we lack __GFP_IO.
To fix this, introduce gfp_compaction_allowed() to abstract the __GFP_IO
evaluation and switch the open-coded test in try_to_compact_pages() to use
it.
Also use the new helper in:
- compaction_ready(), which will make reclaim not bail out in step 3, so
there's at least one attempt to actually reclaim, even if chances are
small for a costly order
- in_reclaim_compaction() which will make should_continue_reclaim()
return false and we don't over-reclaim unnecessarily
- in __alloc_pages_slowpath() to set a local variable can_compact,
which is then used to avoid retrying reclaim/compaction for costly
allocations (step 5) if we can't compact and also to skip the early
compaction attempt that we do in some cases
Link: https://lkml.kernel.org/r/20240221114357.13655-2-vbabka@suse.cz
Fixes:
|
||
Kinsey Ho
|
4acef5694e |
mm/mglru: improve swappiness handling
The reclaimable number of anon pages used to set initial reclaim priority is only based on get_swappiness(). Use can_reclaim_anon_pages() to include NUMA node demotion. Also move the swappiness handling of when !__GFP_IO in try_to_shrink_lruvec() into isolate_folios(). Link: https://lkml.kernel.org/r/20240214060538.3524462-6-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kinsey Ho
|
cc25bbe10a |
mm/mglru: improve struct lru_gen_mm_walk
Rename max_seq to seq in struct lru_gen_mm_walk to keep consistent with struct lru_gen_mm_state. Note that seq is not always up to date with max_seq from lru_gen_folio. No functional changes. Link: https://lkml.kernel.org/r/20240214060538.3524462-5-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kinsey Ho
|
2d823764fa |
mm/mglru: improve reset_mm_stats()
struct lruvec* is already a field of struct lru_gen_mm_walk. Remove the parameter struct lruvec* into functions that already have access to struct lru_gen_mm_walk*. Also, we do not need to handle reset histogram stats when !should_walk_mmu(). Remove the call to reset_mm_stats() in iterate_mm_list_nowalk(). Link: https://lkml.kernel.org/r/20240214060538.3524462-4-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kinsey Ho
|
51973cc9e5 |
mm/mglru: improve should_run_aging()
scan_control *sc does not need to be passed into should_run_aging(), as it provides only the reclaim priority. This can be moved to get_nr_to_scan(). Refactor should_run_aging() and get_nr_to_scan() to improve code readability. No functional changes. Link: https://lkml.kernel.org/r/20240214060538.3524462-3-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kinsey Ho
|
1ce2292c14 |
mm/mglru: drop unused parameter
Patch series "mm/mglru: code cleanup and refactoring" This provides MGLRU code cleanup and refactoring for better readability. This patch (of 5): struct scan_control *sc is currently passed into try_to_inc_max_seq() and run_aging(). This parameter is not used. Drop the unused parameter struct scan_control *sc. No functional change. Link: https://lkml.kernel.org/r/20240214060538.3524462-1-kinseyho@google.com Link: https://lkml.kernel.org/r/20240214060538.3524462-2-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Donet Tom <donettom@linux.vnet.ibm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Hao Ge
|
9814171852 |
mm/vmscan: make too_many_isolated return bool
too_many_isolated() should return bool as does the similar too_many_isolated() in mm/compaction.c. Link: https://lkml.kernel.org/r/20240205042618.108140-1-gehao@kylinos.cn Signed-off-by: Hao Ge <gehao@kylinos.cn> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Hao Ge
|
e321d7c934 |
mm/vmscan: change the type of file from int to bool
Change the type of file from int to bool because is_file_lru return bool Link: https://lkml.kernel.org/r/20240131103802.122920-1-gehao@kylinos.cn Signed-off-by: Hao Ge <gehao@kylinos.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Levi Yun
|
96200c9150 |
kswapd: replace try_to_freeze() with kthread_freezable_should_stop()
Instead of using try_to_freeze, use kthread_freezable_should_stop in kswapd. By this, we can avoid unnecessary freezing when kswapd should stop. Link: https://lkml.kernel.org/r/20240126152556.58791-1-ppbuk5246@gmail.com Signed-off-by: Levi Yun <ppbuk5246@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Linus Torvalds
|
fb46e22a9e |
Many singleton patches against the MM code. The patch series which
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
||
Kirill A. Shutemov
|
5e0a760b44 |
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
commit
|
||
Li Zhijian
|
b805ab3c69 |
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
Demotion can work well without CONFIG_NUMA_BALANCING. But the commit |
||
|
Kinsey Ho
|
7eb2d01a1b |
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
Improve code readability by removing CONFIG_TRANSPARENT_HUGEPAGE, since the compiler should be able to automatically optimize out the code that promotes THPs during page table walks. No functional changes. Link: https://lkml.kernel.org/r/20231227141205.2200125-6-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Co-developed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Tested-by: Donet Tom <donettom@linux.vnet.ibm.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kinsey Ho
|
745b13e647 |
mm/mglru: remove CONFIG_MEMCG
Remove CONFIG_MEMCG in a refactoring to improve code readability at the cost of a few bytes in struct lru_gen_folio per node when CONFIG_MEMCG=n. Link: https://lkml.kernel.org/r/20231227141205.2200125-4-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Co-developed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Tested-by: Donet Tom <donettom@linux.vnet.ibm.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kinsey Ho
|
61dd3f246b |
mm/mglru: add CONFIG_LRU_GEN_WALKS_MMU
Add CONFIG_LRU_GEN_WALKS_MMU such that if disabled, the code that walks page tables to promote pages into the youngest generation will not be built. Also improves code readability by adding two helper functions get_mm_state() and get_next_mm(). Link: https://lkml.kernel.org/r/20231227141205.2200125-3-kinseyho@google.com Signed-off-by: Kinsey Ho <kinseyho@google.com> Co-developed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Tested-by: Donet Tom <donettom@linux.vnet.ibm.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Yu Zhao
|
c28ac3c7eb |
mm/mglru: skip special VMAs in lru_gen_look_around()
Special VMAs like VM_PFNMAP can contain anon pages from COW. There isn't
much profit in doing lookaround on them. Besides, they can trigger the
pte_special() warning in get_pte_pfn().
Skip them in lru_gen_look_around().
Link: https://lkml.kernel.org/r/20231223045647.1566043-1-yuzhao@google.com
Fixes:
|
||
Yosry Ahmed
|
7d7ef0a468 |
mm: memcg: restore subtree stats flushing
Stats flushing for memcg currently follows the following rules: - Always flush the entire memcg hierarchy (i.e. flush the root). - Only one flusher is allowed at a time. If someone else tries to flush concurrently, they skip and return immediately. - A periodic flusher flushes all the stats every 2 seconds. The reason this approach is followed is because all flushes are serialized by a global rstat spinlock. On the memcg side, flushing is invoked from userspace reads as well as in-kernel flushers (e.g. reclaim, refault, etc). This approach aims to avoid serializing all flushers on the global lock, which can cause a significant performance hit under high concurrency. This approach has the following problems: - Occasionally a userspace read of the stats of a non-root cgroup will be too expensive as it has to flush the entire hierarchy [1]. - Sometimes the stats accuracy are compromised if there is an ongoing flush, and we skip and return before the subtree of interest is actually flushed, yielding stale stats (by up to 2s due to periodic flushing). This is more visible when reading stats from userspace, but can also affect in-kernel flushers. The latter problem is particulary a concern when userspace reads stats after an event occurs, but gets stats from before the event. Examples: - When memory usage / pressure spikes, a userspace OOM handler may look at the stats of different memcgs to select a victim based on various heuristics (e.g. how much private memory will be freed by killing this). Reading stale stats from before the usage spike in this case may cause a wrongful OOM kill. - A proactive reclaimer may read the stats after writing to memory.reclaim to measure the success of the reclaim operation. Stale stats from before reclaim may give a false negative. - Reading the stats of a parent and a child memcg may be inconsistent (child larger than parent), if the flush doesn't happen when the parent is read, but happens when the child is read. As for in-kernel flushers, they will occasionally get stale stats. No regressions are currently known from this, but if there are regressions, they would be very difficult to debug and link to the source of the problem. This patch aims to fix these problems by restoring subtree flushing, and removing the unified/coalesced flushing logic that skips flushing if there is an ongoing flush. This change would introduce a significant regression with global stats flushing thresholds. With per-memcg stats flushing thresholds, this seems to perform really well. The thresholds protect the underlying lock from unnecessary contention. This patch was tested in two ways to ensure the latency of flushing is up to par, on a machine with 384 cpus: - A synthetic test with 5000 concurrent workers in 500 cgroups doing allocations and reclaim, as well as 1000 readers for memory.stat (variation of [2]). No regressions were noticed in the total runtime. Note that significant regressions in this test are observed with global stats thresholds, but not with per-memcg thresholds. - A synthetic stress test for concurrently reading memcg stats while memory allocation/freeing workers are running in the background, provided by Wei Xu [3]. With 250k threads reading the stats every 100ms in 50k cgroups, 99.9% of reads take <= 50us. Less than 0.01% of reads take more than 1ms, and no reads take more than 100ms. [1] https://lore.kernel.org/lkml/CABWYdi0c6__rh-K7dcM_pkf9BJdTRtAU08M43KO9ME4-dsgfoQ@mail.gmail.com/ [2] https://lore.kernel.org/lkml/CAJD7tka13M-zVZTyQJYL1iUAYvuQ1fcHbCjcOBZcz6POYTV-4g@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CAAPL-u9D2b=iF5Lf_cRnKxUfkiEe0AMDTu6yhrUAzX0b6a6rDg@mail.gmail.com/ [akpm@linux-foundation.org: fix mm/zswap.c] [yosryahmed@google.com: remove stats flushing mutex] Link: https://lkml.kernel.org/r/CAJD7tkZgP3m-VVPn+fF_YuvXeQYK=tZZjJHj=dzD=CcSSpp2qg@mail.gmail.com Link: https://lkml.kernel.org/r/20231129032154.3710765-6-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Tested-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Acked-by: Shakeel Butt <shakeelb@google.com> Cc: Chris Li <chrisl@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Ivan Babrou <ivan@cloudflare.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutny <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Tejun Heo <tj@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Wei Xu <weixugc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Andrew Morton
|
a721aeac8b | sync mm-stable with mm-hotfixes-stable to pick up depended-upon changes | ||
|
Yu Zhao
|
4376807bf2 |
mm/mglru: reclaim offlined memcgs harder
In the effort to reduce zombie memcgs [1], it was discovered that the
memcg LRU doesn't apply enough pressure on offlined memcgs. Specifically,
instead of rotating them to the tail of the current generation
(MEMCG_LRU_TAIL) for a second attempt, it moves them to the next
generation (MEMCG_LRU_YOUNG) after the first attempt.
Not applying enough pressure on offlined memcgs can cause them to build
up, and this can be particularly harmful to memory-constrained systems.
On Pixel 8 Pro, launching apps for 50 cycles:
Before After Change
Zombie memcgs 45 35 -22%
[1] https://lore.kernel.org/CABdmKX2M6koq4Q0Cmp_-=wbP0Qa190HdEGGaHfxNS05gAkUtPA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20231208061407.2125867-4-yuzhao@google.com
Fixes:
|
||
|
Yu Zhao
|
8aa4206179 |
mm/mglru: respect min_ttl_ms with memcgs
While investigating kswapd "consuming 100% CPU" [1] (also see "mm/mglru:
try to stop at high watermarks"), it was discovered that the memcg LRU can
breach the thrashing protection imposed by min_ttl_ms.
Before the memcg LRU:
kswapd()
shrink_node_memcgs()
mem_cgroup_iter()
inc_max_seq() // always hit a different memcg
lru_gen_age_node()
mem_cgroup_iter()
check the timestamp of the oldest generation
After the memcg LRU:
kswapd()
shrink_many()
restart:
iterate the memcg LRU:
inc_max_seq() // occasionally hit the same memcg
if raced with lru_gen_rotate_memcg():
goto restart
lru_gen_age_node()
mem_cgroup_iter()
check the timestamp of the oldest generation
Specifically, when the restart happens in shrink_many(), it needs to stick
with the (memcg LRU) generation it began with. In other words, it should
neither re-read memcg_lru->seq nor age an lruvec of a different
generation. Otherwise it can hit the same memcg multiple times without
giving lru_gen_age_node() a chance to check the timestamp of that memcg's
oldest generation (against min_ttl_ms).
[1] https://lore.kernel.org/CAK8fFZ4DY+GtBA40Pm7Nn5xCHy+51w3sfxPqkqpqakSXYyX+Wg@mail.gmail.com/
Link: https://lkml.kernel.org/r/20231208061407.2125867-3-yuzhao@google.com
Fixes:
|
||
|
Yu Zhao
|
5095a2b239 |
mm/mglru: try to stop at high watermarks
The initial MGLRU patchset didn't include the memcg LRU support, and it relied on should_abort_scan(), added by commit |
||
|
Yu Zhao
|
081488051d |
mm/mglru: fix underprotected page cache
Unmapped folios accessed through file descriptors can be underprotected.
Those folios are added to the oldest generation based on:
1. The fact that they are less costly to reclaim (no need to walk the
rmap and flush the TLB) and have less impact on performance (don't
cause major PFs and can be non-blocking if needed again).
2. The observation that they are likely to be single-use. E.g., for
client use cases like Android, its apps parse configuration files
and store the data in heap (anon); for server use cases like MySQL,
it reads from InnoDB files and holds the cached data for tables in
buffer pools (anon).
However, the oldest generation can be very short lived, and if so, it
doesn't provide the PID controller with enough time to respond to a surge
of refaults. (Note that the PID controller uses weighted refaults and
those from evicted generations only take a half of the whole weight.) In
other words, for a short lived generation, the moving average smooths out
the spike quickly.
To fix the problem:
1. For folios that are already on LRU, if they can be beyond the
tracking range of tiers, i.e., five accesses through file
descriptors, move them to the second oldest generation to give them
more time to age. (Note that tiers are used by the PID controller
to statistically determine whether folios accessed multiple times
through file descriptors are worth protecting.)
2. When adding unmapped folios to LRU, adjust the placement of them so
that they are not too close to the tail. The effect of this is
similar to the above.
On Android, launching 55 apps sequentially:
Before After Change
workingset_refault_anon 25641024 25598972 0%
workingset_refault_file 115016834 106178438 -8%
Link: https://lkml.kernel.org/r/20231208061407.2125867-1-yuzhao@google.com
Fixes:
|
||
|
Li Zhijian
|
23e9f01389 |
mm/vmstat: move pgdemote_* to per-node stats
Demotion will migrate pages across nodes. Previously, only the global demotion statistics were accounted for. Changed them to per-node statistics, making it easier to observe where demotion occurs on each node. This will help to identify which nodes are under pressure. This patch also make pgdemote_* behind CONFIG_NUMA_BALANCING, since demotion is not available for !CONFIG_NUMA_BALANCING With this patch, here is a sample where node0 node1 are DRAM, node3 is PMEM: Global stats: $ grep demote /proc/vmstat pgdemote_kswapd 254288 pgdemote_direct 113497 pgdemote_khugepaged 0 Per-node stats: $ grep demote /sys/devices/system/node/node0/vmstat # demotion source pgdemote_kswapd 68454 pgdemote_direct 83431 pgdemote_khugepaged 0 $ grep demote /sys/devices/system/node/node1/vmstat # demotion source pgdemote_kswapd 185834 pgdemote_direct 30066 pgdemote_khugepaged 0 $ grep demote /sys/devices/system/node/node3/vmstat # demotion target pgdemote_kswapd 0 pgdemote_direct 0 pgdemote_khugepaged 0 Link: https://lkml.kernel.org/r/20231103031450.1456523-1-lizhijian@fujitsu.com Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Acked-by: "Huang, Ying" <ying.huang@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Jaewon Kim
|
8c2214fc9a |
mm: multi-gen LRU: reuse some legacy trace events
As the legacy lru provides, the mglru needs some trace events for debugging. Let's reuse following legacy events for the mglru. trace_mm_vmscan_lru_isolate trace_mm_vmscan_lru_shrink_inactive Here's an example mm_vmscan_lru_isolate: classzone=2 order=0 nr_requested=4096 nr_scanned=64 nr_skipped=0 nr_taken=64 lru=inactive_file mm_vmscan_lru_shrink_inactive: nid=0 nr_scanned=64 nr_reclaimed=63 nr_dirty=0 nr_writeback=0 nr_congested=0 nr_immediate=0 nr_activate_anon=0 nr_activate_file=1 nr_ref_keep=0 nr_unmap_fail=0 priority=2 flags=RECLAIM_WB_FILE|RECLAIM_WB_ASYNC Link: https://lkml.kernel.org/r/20231003114155.21869-1-jaewon31.kim@samsung.com Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: SeongJae Park <sj@kernel.org> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: T.J. Mercier <tjmercier@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
liwenyu
|
76a0fb4fd5 |
delayacct: add memory reclaim delay in get_page_from_freelist
The current memory reclaim delay statistics only count the direct memory reclaim of the task in do_try_to_free_pages(). In systems with NUMA open, some tasks occasionally experience slower response times, but the total count of reclaim does not increase, using ftrace can show that node_reclaim has occurred. The memory reclaim occurring in get_page_from_freelist() is also due to heavy memory load. To get the impact of tasks in memory reclaim, this patch adds the statistics of the memory reclaim delay statistics for __node_reclaim(). Link: https://lkml.kernel.org/r/181C946095F0252B+7cc60eca-1abf-4502-aad3-ffd8ef89d910@ex.bilibili.com Signed-off-by: Wen Yu Li <wenyuli@ex.bilibili.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: <wangyun@bilibili.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Vlastimil Babka
|
3dfbb555c9 |
mm, vmscan: remove ISOLATE_UNMAPPED
This isolate_mode_t flag is effectively unused since
|
||
Xin Hao
|
811244a501 |
mm: memcg: add THP swap out info for anonymous reclaim
At present, we support per-memcg reclaim strategy, however we do not know the number of transparent huge pages being reclaimed, as we know the transparent huge pages need to be splited before reclaim them, and they will bring some performance bottleneck effect. for example, when two memcg (A & B) are doing reclaim for anonymous pages at same time, and 'A' memcg is reclaiming a large number of transparent huge pages, we can better analyze that the performance bottleneck will be caused by 'A' memcg. therefore, in order to better analyze such problems, there add THP swap out info for per-memcg. [akpm@linux-foundation.orgL fix swap_writepage_fs(), per Johannes] Link: https://lkml.kernel.org/r/20230913213343.GB48476@cmpxchg.org Link: https://lkml.kernel.org/r/20230913164938.16918-1-vernhao@tencent.com Signed-off-by: Xin Hao <vernhao@tencent.com> Suggested-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |