This changes the btrfs worker threads to batch work items
into a local list. It allows us to pull work items in
large chunks and significantly reduces the number of times we
need to take the worker thread spinlock.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The btrfs worker thread spinlock was being used both for the
queueing of IO and for the processing of ordered events.
The ordered events never happen from end_io handlers, and so they
don't need to use the _irq version of spinlocks. This adds a
dedicated lock to the ordered lists so they don't have to run
with irqs off.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The Btrfs worker threads don't currently die off after they have
been idle for a while, leading to a lot of threads sitting around
doing nothing for each mount.
Also, they are unable to start atomically (from end_io hanlders).
This commit reworks the worker threads so they can be started
from end_io handlers (just setting a flag that asks for a thread
to be added at a later date) and so they can exit if they
have been idle for a long time.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If spin_lock_irqsave is called twice in a row with the same second
argument, the interrupt state at the point of the second call overwrites
the value saved by the first call. Indeed, the second call does not need
to save the interrupt state, so it is changed to a simple spin_lock.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
worker memory is already freed on one fail path in btrfs_start_workers,
but is still dereferenced. Switch the dereference and kfree.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch fixes a bug which may result race condition
between btrfs_start_workers() and worker_loop().
btrfs_start_workers() executed in a parent thread writes
on workers->worker and worker_loop() in a child thread
reads workers->worker. However, there is no synchronization
enforcing the order of two operations.
This patch makes btrfs_start_workers() fill workers->worker
before it starts a child thread with worker_loop()
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs is using WRITE_SYNC_PLUG to send down synchronous IOs with a
higher priority. But, the checksumming helper threads prevent it
from being fully effective.
There are two problems. First, a big queue of pending checksumming
will delay the synchronous IO behind other lower priority writes. Second,
the checksumming uses an ordered async work queue. The ordering makes sure
that IOs are sent to the block layer in the same order they are sent
to the checksumming threads. Usually this gives us less seeky IO.
But, when we start mixing IO priorities, the lower priority IO can delay
the higher priority IO.
This patch solves both problems by adding a high priority list to the async
helper threads, and a new btrfs_set_work_high_prio(), which is used
to make put a new async work item onto the higher priority list.
The ordering is still done on high priority IO, but all of the high
priority bios are ordered separately from the low priority bios. This
ordering is purely an IO optimization, it is not involved in data
or metadata integrity.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Need to check kthread_should_stop after schedule_timeout() before calling
schedule(). This causes threads to sleep with potentially no one to wake them
up causing mount(2) to hang in btrfs_stop_workers waiting for threads to stop.
Signed-off-by: Amit Gud <gud@ksu.edu>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Tracing shows the delay between when an async thread goes to sleep
and when more work is added is often very short. This commit adds
a little bit of delay and extra checking to the code right before
we schedule out.
It allows more work to be added to the worker
without requiring notifications from other procs.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The async bio submission thread was missing some bios that were
added after it had decided there was no work left to do.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
In worker_loop(), the func should check whether it has been requested to stop
before it decides to schedule out.
Otherwise if the stop request(also the last wake_up()) sent by
btrfs_stop_workers() happens when worker_loop() running after the "while"
judgement and before schedule(), woker_loop() will schedule away and never be
woken up, which will also cause btrfs_stop_workers() wait forever.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs uses kernel threads to create async work queues for cpu intensive
operations such as checksumming and decompression. These work well,
but they make it difficult to keep IO order intact.
A single writepages call from pdflush or fsync will turn into a number
of bios, and each bio is checksummed in parallel. Once the checksum is
computed, the bio is sent down to the disk, and since we don't control
the order in which the parallel operations happen, they might go down to
the disk in almost any order.
The code deals with this somewhat by having deep work queues for a single
kernel thread, making it very likely that a single thread will process all
the bios for a single inode.
This patch introduces an explicitly ordered work queue. As work structs
are placed into the queue they are put onto the tail of a list. They have
three callbacks:
->func (cpu intensive processing here)
->ordered_func (order sensitive processing here)
->ordered_free (free the work struct, all processing is done)
The work struct has three callbacks. The func callback does the cpu intensive
work, and when it completes the work struct is marked as done.
Every time a work struct completes, the list is checked to see if the head
is marked as done. If so the ordered_func callback is used to do the
order sensitive processing and the ordered_free callback is used to do
any cleanup. Then we loop back and check the head of the list again.
This patch also changes the checksumming code to use the ordered workqueues.
One a 4 drive array, it increases streaming writes from 280MB/s to 350MB/s.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When reading in block groups, a global mask of the available raid policies
should be adjusted based on the types of block groups found on disk. This
global mask is then used to decide which raid policy to use for new
block groups.
The recent allocator changes dropped the call that updated the global
mask, making all the block groups allocated at run time single striped
onto a single drive.
This also fixes the async worker threads to set any thread that uses
the requeue mechanism as busy. This allows us to avoid blocking
on get_request_wait for the async bio submission threads.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This improves the comments at the top of many functions. It didn't
dive into the guts of functions because I was trying to
avoid merging problems with the new allocator and back reference work.
extent-tree.c and volumes.c were both skipped, and there is definitely
more work todo in cleaning and commenting the code.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs had compatibility code for kernels back to 2.6.18. These have
been removed, and will be maintained in a separate backport
git tree from now on.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Before this change, btrfs would use a bdi congestion function to make
sure there weren't too many pending async checksum work items.
This change makes the process creating async work items wait instead,
leading to fewer congestion returns from the bdi. This improves
pdflush background_writeout scanning.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Large streaming reads make for large bios, which means each entry on the
list async work queues represents a large amount of data. IO
congestion throttling on the device was kicking in before the async
worker threads decided a single thread was busy and needed some help.
The end result was that a streaming read would result in a single CPU
running at 100% instead of balancing the work off to other CPUs.
This patch also changes the pre-IO checksum lookup done by reads to
work on a per-bio basis instead of a per-page. This results in many
extra btree lookups on large streaming reads. Doing the checksum lookup
right before bio submit allows us to reuse searches while processing
adjacent offsets.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When kthread_run() returns failure, this worker hasn't been
added to the list, so btrfs_stop_workers() won't free it.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This changes the worker thread pool to maintain a list of idle threads,
avoiding a complex search for a good thread to wake up.
Threads have two states:
idle - we try to reuse the last thread used in hopes of improving the batching
ratios
busy - each time a new work item is added to a busy task, the task is
rotated to the end of the line.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs has been using workqueues to spread the checksumming load across
other CPUs in the system. But, workqueues only schedule work on the
same CPU that queued the work, giving them a limited benefit for systems with
higher CPU counts.
This code adds a generic facility to schedule work with pools of kthreads,
and changes the bio submission code to queue bios up. The queueing is
important to make sure large numbers of procs on the system don't
turn streaming workloads into random workloads by sending IO down
concurrently.
The end result of all of this is much higher performance (and CPU usage) when
doing checksumming on large machines. Two worker pools are created,
one for writes and one for endio processing. The two could deadlock if
we tried to service both from a single pool.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
