mirror of
https://github.com/torvalds/linux.git
synced 2024-09-20 23:13:00 +00:00
8a8317f927
6130 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Mark Brown
|
8a8317f927
|
regmap: kunit: Add some test cases and a few small
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: This series adds some more test cases, mainly for testing: commit |
||
Richard Fitzgerald
|
f63eb9ae08
|
regmap: kunit: Add test cases for regmap_read_bypassed()
This adds test cases to prove that regmap_read_bypassed() reads the hardware value while the regmap is in cache-only. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240408144600.230848-12-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Richard Fitzgerald
|
468d277e6f
|
regmap: kunit: Add cache-drop test with multiple cache blocks
Add a test case for dropping only some cache blocks and leaving others unchanged. The regmap is divided into 8 register ranges, and only 4 of these are written with values. This creates 4 non-contiguous ranges of registers with cached values. One whole range is then dropped, and part of another range. A cache sync is then performed to check that the correct registers were written, and the correct values were written to these registers. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240408144600.230848-11-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Richard Fitzgerald
|
d6f2fd7adc
|
regmap: kunit: Replace a kmalloc/kfree() pair with KUnit-managed alloc
Replace the kmalloc() and kfree() in raw_read_defaults() with a kunit_kmalloc() so that KUnit will free it automatically. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240408144600.230848-10-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Richard Fitzgerald
|
ce75e06eea
|
regmap: kunit: Use a KUnit action to call regmap_exit()
Registert a KUnit action handler to call regmap_exit() when a test terminates. This ensures that regmap_exit() will be called if a test function returns early or aborts. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240408144600.230848-9-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Richard Fitzgerald
|
7903d15f00
|
regmap: kunit: Add more cache-sync tests
Extend the testing of cache-sync. - cache_sync() renamed cache_sync_marked_dirty() for clarity of what conditions it is testing. - cache_sync_defaults() renamed cache_sync_defaults_marked_dirty() for clarity. Added code to write the register back to its default value to check that a dirty sync doesn't write out the default value. - Added cache_sync_after_cache_only(). Tests syncing the cache without calling regcache_mark_dirty(). A register written while in cache-only should be written out by regcache_sync(). - Added cache_sync_default_after_cache_only. This is similar to cache_sync_after_cache_only(), but the register is changed to its default value while in cache-only. Because regcache_mark_dirty() was NOT called, regacache_sync() should write out the register. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240408144600.230848-8-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Richard Fitzgerald
|
7dd52d301c
|
regmap: kunit: Add more cache-drop tests
Extend the testing of cache-drop. - Added cache_drop_all_and_sync_marked_dirty(). If all registers are dropped from the cache a regcache_mark_dirty() followed by regcache_sync() should not write anything because the cache is empty. - Added cache_drop_all_and_sync_no_defaults(). This is similar to cache_drop_all_and_sync_marked_dirty() except that regcache_mark_dirty() is NOT called. All registers were dropped so regcache_sync() should not write anything. - Added cache_drop_all_and_sync_has_defaults(). This is the same as cache_drop_all_and_sync_no_defaults() except that the regmap has a table of default values. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240408144600.230848-7-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Richard Fitzgerald
|
ac4394bf9c
|
regmap: kunit: Run non-sparse cache tests at non-zero register addresses
Change the tests parameterized by real_cache_types_list[] to test at some register addresses that are not 0. The cache_range_window_reg() test has hardcoded address assumptions that are not present in any other tests using real_cache_types_list[] table. So it has been given a separate parameter table, real_cache_types_only_list[], that preserves the original parameterization. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240408144600.230848-6-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Richard Fitzgerald
|
710915743d
|
regmap: kunit: Run sparse cache tests at non-zero register addresses
Run the cache_drop() and cache_present() tests at blocks of addresses
that don't start at zero.
This adds a from_reg parameter to struct regmap_test_param. This is
used to set the base address of the register defaults created by
gen_regmap().
Extra entries are added to sparse_cache_types_list[] to test at non-zero
from_reg values. The cache_drop() and cache_present() tests are updated
to test at the given offset.
The aim here is to add test cases to cache_drop() for the bug fixed by
commit
|
||
|
Richard Fitzgerald
|
48bccea96f
|
regmap: kunit: Introduce struct for test case parameters
Add a struct regmap_test_param and use it for all test cases instead of passing various different types of param object depending on the test case. This makes it much easier and cleaner to expand what can be parameterized. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240408144600.230848-4-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Richard Fitzgerald
|
7b7982f143
|
regmap: kunit: Create a struct device for the regmap
Use kunit_device_register() to create a real struct device for the regmap instead of leaving it at NULL. The main reason for this is that it allows context data to be passed into the readable_reg/writable_reg/volatile_reg functions by attaching it to the struct device with dev_set_drvdata(). The gen_regmap() and gen_raw_regmap() functions are updated to take a struct kunit * argument. A new struct regmap_test_priv has been created to hold the struct device created by kunit_device_register(). This allows the struct to be extended in the future to hold more private data for the test suite. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240408144600.230848-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Richard Fitzgerald
|
866f70211b
|
regmap: kunit: Fix warnings of implicit casts to __le16 and __be16
Fix warnings about implicit casts to __le16 and __be16 types reported by smatch: drivers/base/regmap/regmap-kunit.c:1118:25: warning: cast to restricted __be16 drivers/base/regmap/regmap-kunit.c:1120:25: warning: cast to restricted __le16 drivers/base/regmap/regmap-kunit.c:1187:33: warning: cast to restricted __be16 drivers/base/regmap/regmap-kunit.c:1190:33: warning: cast to restricted __le16 drivers/base/regmap/regmap-kunit.c:1302:33: warning: cast to restricted __be16 drivers/base/regmap/regmap-kunit.c:1305:33: warning: cast to restricted __le16 Perform a __force cast for all these. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240408144600.230848-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Richard Fitzgerald
|
70ee853eec
|
regmap: Add regmap_read_bypassed()
Add a regmap_read_bypassed() to allow reads from the hardware registers
while the regmap is in cache-only mode.
A typical use for this is to keep the cache in cache-only mode until
the hardware has reached a valid state, but one or more status registers
must be polled to determine when this state is reached.
For example, firmware download on the cs35l56 can take several seconds if
there are multiple amps sharing limited bus bandwidth. This is too long
to block in probe() so it is done as a background task. The device must
be soft-reset to reboot the firmware and during this time the registers are
not accessible, so the cache should be in cache-only. But the driver must
poll a register to detect when reboot has completed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes:
|
||
Linus Torvalds
|
a6bec447a8 |
regmap: Fixes for v6.9
Richard found a nasty corner case in the maple tree code which he fixed, and also fixed a compiler warning which was showing up with the toolchain he uses and helpfully identified a possible incorrect error code which could have runtime impacts. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmYQeR4ACgkQJNaLcl1U h9BT/Af/VYd0T8y0gpEV6DRcEca9MWucll2K/9yUBMwMae2N56RWIYPFj+K3mwQO /KjbEWK9EUzagLZNUMC2gUjY1MEmrq4eKHf/XzjO5Ija8hhYkun51sFZ7jj2Axua 4qaYfRcpfMaFW37Dq7wCRG8Lc62XlbGFXejjknoE/dvsiwVZUzAL/CNgWebeg8pZ 68Ffu5560HBpqGO2PSkKfJwvwWsjhWaFiLSdmsCU54pWCWEAFFVJI9jj3f9ZCK26 P8d7MhlVud5wBJ1nnFqjc4qdLj+91ulVCAfmXG2j+nbBSq1C8IcHuw8QjAtYRXDy hFxE/VVLnFVeIOjYgK3yw55WjdmAgA== =H/t6 -----END PGP SIGNATURE----- Merge tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "Richard found a nasty corner case in the maple tree code which he fixed, and also fixed a compiler warning which was showing up with the toolchain he uses and helpfully identified a possible incorrect error code which could have runtime impacts" * tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: maple: Fix uninitialized symbol 'ret' warnings regmap: maple: Fix cache corruption in regcache_maple_drop() |
||
|
Richard Fitzgerald
|
eaa03486d9
|
regmap: maple: Fix uninitialized symbol 'ret' warnings
Fix warnings reported by smatch by initializing local 'ret' variable
to 0.
drivers/base/regmap/regcache-maple.c:186 regcache_maple_drop()
error: uninitialized symbol 'ret'.
drivers/base/regmap/regcache-maple.c:290 regcache_maple_sync()
error: uninitialized symbol 'ret'.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes:
|
||
|
Richard Fitzgerald
|
00bb549d7d
|
regmap: maple: Fix cache corruption in regcache_maple_drop()
When keeping the upper end of a cache block entry, the entry[] array
must be indexed by the offset from the base register of the block,
i.e. max - mas.index.
The code was indexing entry[] by only the register address, leading
to an out-of-bounds access that copied some part of the kernel
memory over the cache contents.
This bug was not detected by the regmap KUnit test because it only
tests with a block of registers starting at 0, so mas.index == 0.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes:
|
||
Herve Codina
|
0462c56c29 |
driver core: Introduce device_link_wait_removal()
The commit
|
||
Colin Ian King
|
aad6b35290
|
regmap: maple: Remove second semicolon
There is a statement with two semicolons. Remove the second one, it is redundant. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://msgid.link/r/20240315084417.2427797-1-colin.i.king@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Linus Torvalds
|
241590e5a1 |
Driver core changes for 6.9-rc1
Here is the "big" set of driver core and kernfs changes for 6.9-rc1.
Nothing all that crazy here, just some good updates that include:
- automatic attribute group hiding from Dan Williams (he fixed up my
horrible attempt at doing this.)
- kobject lock contention fixes from Eric Dumazet
- driver core cleanups from Andy
- kernfs rcu work from Tejun
- fw_devlink changes to resolve some reported issues
- other minor changes, all details in the shortlog
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwsHg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynT4ACePcNRAsYrINlOPPKPHimJtyP01yEAn0pZYnj2
0/UpqIqf3HVPu7zsLKTa
=vR9S
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core and kernfs changes for 6.9-rc1.
Nothing all that crazy here, just some good updates that include:
- automatic attribute group hiding from Dan Williams (he fixed up my
horrible attempt at doing this.)
- kobject lock contention fixes from Eric Dumazet
- driver core cleanups from Andy
- kernfs rcu work from Tejun
- fw_devlink changes to resolve some reported issues
- other minor changes, all details in the shortlog
All of these have been in linux-next for a long time with no reported
issues"
* tag 'driver-core-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits)
device: core: Log warning for devices pending deferred probe on timeout
driver: core: Use dev_* instead of pr_* so device metadata is added
driver: core: Log probe failure as error and with device metadata
of: property: fw_devlink: Add support for "post-init-providers" property
driver core: Add FWLINK_FLAG_IGNORE to completely ignore a fwnode link
driver core: Adds flags param to fwnode_link_add()
debugfs: fix wait/cancellation handling during remove
device property: Don't use "proxy" headers
device property: Move enum dev_dma_attr to fwnode.h
driver core: Move fw_devlink stuff to where it belongs
driver core: Drop unneeded 'extern' keyword in fwnode.h
firmware_loader: Suppress warning on FW_OPT_NO_WARN flag
sysfs:Addresses documentation in sysfs_merge_group and sysfs_unmerge_group.
firmware_loader: introduce __free() cleanup hanler
platform-msi: Remove usage of the deprecated ida_simple_xx() API
sysfs: Introduce DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE()
sysfs: Document new "group visible" helpers
sysfs: Fix crash on empty group attributes array
sysfs: Introduce a mechanism to hide static attribute_groups
sysfs: Introduce a mechanism to hide static attribute_groups
...
|
||
|
Linus Torvalds
|
02c163e959 |
cxl for v6.9
- Supplement ACPI HMAT reported memory performance with native CXL
memory performance enumeration
- Add support for CXL error injection via the ACPI EINJ mechanism
- Cleanup CXL DOE and CDAT integration
- Miscellaneous cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZfSddgAKCRDfioYZHlFs
Z+QJAQC0DaU/QbziEUFgd6r92nLA9PHLWi2zhjsSjyuJ3kh3IQD+KN0h8IZ+Av05
EOjLw21+ejwJ2dtCDcy2dlSpS6653wc=
=czLR
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dan Williams:
"CXL has mechanisms to enumerate the performance characteristics of
memory devices. Those mechanisms allow Linux to build the equivalent
of ACPI SRAT, SLIT, and HMAT tables dynamically at runtime. That
capability is necessary because static ACPI can not represent dynamic
CXL configurations (and reconfigurations).
So, building on the v6.8 work to add "Quality of Service" enumeration,
this update plumbs CXL "access coordinates" (read/write access latency
and bandwidth) in all the same places that ACPI HMAT feeds similar
data. Follow-on patches from the -mm side can then use that data to
feed mechanisms like mm/memory-tiers.c. Greg has acked the touch to
drivers/base/.
The other feature update this cycle is support for CXL error injection
via the ACPI EINJ module. That facility enables injection of bus
protocol errors provided the user knows the magic address values to
insert in the interface. To hide that magic, and make this easier to
use, new error injection attributes were added to CXL debugfs. That
interface injects the errors relative to a CXL object rather than
require user tooling to know how to lookup and inject RCRB (Root
Complex Register Block) addresses into the raw EINJ debugfs interface.
It received some helpful review comments from Tony, but no explicit
acks from the ACPI side. The primary user visible change for existing
EINJ users is that they may find that einj.ko was already loaded by
cxl_core.ko. Previously, einj.ko was only loaded on demand.
The usual collection of miscellaneous cleanups are also present this
cycle.
Summary:
- Supplement ACPI HMAT reported memory performance with native CXL
memory performance enumeration
- Add support for CXL error injection via the ACPI EINJ mechanism
- Cleanup CXL DOE and CDAT integration
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation"
lib/firmware_table: Provide buffer length argument to cdat_table_parse()
cxl/pci: Get rid of pointer arithmetic reading CDAT table
cxl/pci: Rename DOE mailbox handle to doe_mb
cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location
cxl/core: Add CXL EINJ debugfs files
EINJ, Documentation: Update EINJ kernel doc
EINJ: Add CXL error type support
EINJ: Migrate to a platform driver
cxl/region: Deal with numa nodes not enumerated by SRAT
cxl/region: Add memory hotplug notifier for cxl region
cxl/region: Add sysfs attribute for locality attributes of CXL regions
cxl/region: Calculate performance data for a region
cxl: Set cxlmd->endpoint before adding port device
cxl: Move QoS class to be calculated from the nearest CPU
cxl: Split out host bridge access coordinates
cxl: Split out combine_coordinates() for common shared usage
ACPI: HMAT / cxl: Add retrieval of generic port coordinates for both access classes
ACPI: HMAT: Introduce 2 levels of generic port access class
base/node / ACPI: Enumerate node access class for 'struct access_coordinate'
...
|
||
|
Linus Torvalds
|
902861e34c |
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is hotplugged
as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving policy
wherein we allocate memory across nodes in a weighted fashion rather
than uniformly. This is beneficial in heterogeneous memory environments
appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the process
has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown situations.
The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's series
"Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page faults.
He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction test",
Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
our handling of DAX on archiecctures which have virtually aliasing data
caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
improvements in worst-case mmap_lock hold times during certain
userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability improvements
in his series "Mitigate a vmap lock contention". It realizes a 12x
improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging of
large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages() to
an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which are
configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
=TG55
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
||
|
Linus Torvalds
|
07abb19a9b |
Power management updates for 6.9-rc1
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V).
- Fix and clean up system suspend statistics collection (Rafael
Wysocki).
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki).
- Fix PCI hibernation support description (Yiwei Lin).
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy).
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah).
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li).
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus).
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin).
- Enable preferred core support in the amd-pstate cpufreq driver (Meng
Li).
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li).
- Allow intel_pstate to assign model-specific values to strings used in
the EPP sysfs interface and make it do so on Meteor Lake (Srinivas
Pandruvada).
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby).
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar).
- Change default transition delay in cpufreq to 2ms (Qais Yousef).
- Remove references to 10ms minimum sampling rate from comments in the
cpufreq code (Pierre Gondois).
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef).
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar).
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova).
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois).
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle).
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng).
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang).
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui).
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano).
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li).
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda).
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil).
- Fix a couple of warnings in the OPP core code related to W=1
builds (Viresh Kumar).
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar).
- Extend dev_pm_opp_data with turbo support (Sibi Sankar).
- dt-bindings: drop maxItems from inner items (David Heidelberg).
-----BEGIN PGP SIGNATURE-----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=UePT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"From the functional perspective, the most significant change here is
the addition of support for Energy Models that can be updated
dynamically at run time.
There is also the addition of LZ4 compression support for hibernation,
the new preferred core support in amd-pstate, new platforms support in
the Intel RAPL driver, new model-specific EPP handling in intel_pstate
and more.
Apart from that, the cpufreq default transition delay is reduced from
10 ms to 2 ms (along with some related adjustments), the system
suspend statistics code undergoes a significant rework and there is a
usual bunch of fixes and code cleanups all over.
Specifics:
- Allow the Energy Model to be updated dynamically (Lukasz Luba)
- Add support for LZ4 compression algorithm to the hibernation image
creation and loading code (Nikhil V)
- Fix and clean up system suspend statistics collection (Rafael
Wysocki)
- Simplify device suspend and resume handling in the power management
core code (Rafael Wysocki)
- Fix PCI hibernation support description (Yiwei Lin)
- Make hibernation take set_memory_ro() return values into account as
appropriate (Christophe Leroy)
- Set mem_sleep_current during kernel command line setup to avoid an
ordering issue with handling it (Maulik Shah)
- Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
driver's system suspend callback (Qingliang Li)
- Simplify pm_runtime_get_if_active() usage and add a replacement for
pm_runtime_put_autosuspend() (Sakari Ailus)
- Add a tracepoint for runtime_status changes tracking (Vilas Bhat)
- Fix section title markdown in the runtime PM documentation (Yiwei
Lin)
- Enable preferred core support in the amd-pstate cpufreq driver
(Meng Li)
- Fix min_perf assignment in amd_pstate_adjust_perf() and make the
min/max limit perf values in amd-pstate always stay within the
(highest perf, lowest perf) range (Tor Vic, Meng Li)
- Allow intel_pstate to assign model-specific values to strings used
in the EPP sysfs interface and make it do so on Meteor Lake
(Srinivas Pandruvada)
- Drop long-unused cpudata::prev_cummulative_iowait from the
intel_pstate cpufreq driver (Jiri Slaby)
- Prevent scaling_cur_freq from exceeding scaling_max_freq when the
latter is an inefficient frequency (Shivnandan Kumar)
- Change default transition delay in cpufreq to 2ms (Qais Yousef)
- Remove references to 10ms minimum sampling rate from comments in
the cpufreq code (Pierre Gondois)
- Honour transition_latency over transition_delay_us in cpufreq (Qais
Yousef)
- Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)
- General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
Belova)
- Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)
- Make the SCMI cpufreq driver get a transition delay value from
firmware (Pierre Gondois)
- Prevent the haltpoll cpuidle governor from shrinking guest
poll_limit_ns below grow_start (Parshuram Sangle)
- Avoid potential overflow in integer multiplication when computing
cpuidle state parameters (C Cheng)
- Adjust MWAIT hint target C-state computation in the ACPI cpuidle
driver and in intel_idle to return a correct value for C0 (He
Rongguang)
- Address multiple issues in the TPMI RAPL driver and add support for
new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)
- Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
Lezcano)
- Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)
- Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
Norway Ananda)
- Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)
- Fix a couple of warnings in the OPP core code related to W=1 builds
(Viresh Kumar)
- Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
Kumar)
- Extend dev_pm_opp_data with turbo support (Sibi Sankar)
- dt-bindings: drop maxItems from inner items (David Heidelberg)"
* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
dt-bindings: opp: drop maxItems from inner items
OPP: debugfs: Fix warning around icc_get_name()
OPP: debugfs: Fix warning with W=1 builds
cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
OPP: Extend dev_pm_opp_data with turbo support
Fix cpupower-frequency-info.1 man page typo
cpufreq: scmi: Set transition_delay_us
firmware: arm_scmi: Populate fast channel rate_limit
firmware: arm_scmi: Populate perf commands rate_limit
cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
PM: sleep: wakeirq: fix wake irq warning in system suspend
powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
cpufreq: Don't unregister cpufreq cooling on CPU hotplug
PM: suspend: Set mem_sleep_current during kernel command line setup
cpufreq: Honour transition_latency over transition_delay_us
cpufreq: Limit resolving a frequency to policy min/max
Documentation: PM: Fix runtime_pm.rst markdown syntax
cpufreq: amd-pstate: adjust min/max limit perf
cpufreq: Remove references to 10ms min sampling rate
cpufreq: intel_pstate: Update default EPPs for Meteor Lake
...
|
||
|
Linus Torvalds
|
a070a08d00 |
Core:
- Log a message when unused PM domains gets disabled
- Scale down parent/child performance states in the reverse order
Providers:
- qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO, PMA8084
and PM8841
- renesas: rcar-gen4-sysc: Reduce atomic delays
- renesas: rcar-sysc: Adjust the waiting time to cover the worst case
- renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains
- imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains
- imx: imx8mp-blk-ctrl: Error out if domains are missing in DT
Improve support for multiple PM domains:
- Add two helper functions to attach/detach multiple PM domains
- Convert a couple of drivers to use the new helper functions
-----BEGIN PGP SIGNATURE-----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=KslH
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"Core:
- Log a message when unused PM domains gets disabled
- Scale down parent/child performance states in the reverse order
Providers:
- qcom: rpmpd: Add power domains support for MSM8974, MSM8974PRO,
PMA8084 and PM8841
- renesas: rcar-gen4-sysc: Reduce atomic delays
- renesas: rcar-sysc: Adjust the waiting time to cover the worst case
- renesas: r8a779h0-sysc: Add support for the r8a779h0 PM domains
- imx: imx8mp-blk-ctrl: Add the fdcc clock to the hdmimix domains
- imx: imx8mp-blk-ctrl: Error out if domains are missing in DT
Improve support for multiple PM domains:
- Add two helper functions to attach/detach multiple PM domains
- Convert a couple of drivers to use the new helper functions"
* tag 'pmdomain-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (22 commits)
pmdomain: renesas: rcar-gen4-sysc: Reduce atomic delays
pmdomain: renesas: Adjust the waiting time to cover the worst case
pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
pmdomain: core: constify of_phandle_args in add device and subdomain
pmdomain: core: constify of_phandle_args in xlate
media: venus: Convert to dev_pm_domain_attach|detach_list() for vcodec
remoteproc: qcom_q6v5_adsp: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_rproc: Convert to dev_pm_domain_attach|detach_list()
remoteproc: imx_dsp_rproc: Convert to dev_pm_domain_attach|detach_list()
PM: domains: Add helper functions to attach/detach multiple PM domains
pmdomain: imx8mp-blk-ctrl: imx8mp_blk: Add fdcc clock to hdmimix domain
pmdomain: mediatek: Use devm_platform_ioremap_resource() in init_scp()
pmdomain: renesas: r8a779h0-sysc: Add r8a779h0 support
pmdomain: imx8mp-blk-ctrl: Error out if domains are missing in DT
pmdomain: ti: Add a null pointer check to the omap_prm_domain_init
pmdomain: renesas: rcar-gen4-sysc: Remove unneeded includes
pmdomain: core: Print a message when unused power domains are disabled
pmdomain: qcom: rpmpd: Keep one RPM handle for all RPMPDs
pmdomain: core: Scale down parent/child performance states in reverse order
...
|
||
|
Linus Torvalds
|
b30f2db0b7 |
regmap: Updates for v6.9
Just two updates this time around, a rework of max_register handling which enables us to support devices with only one register better and a new test which will be used to validate use of some new SPI optimisations which will be coming in during this merge window. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvE9UACgkQJNaLcl1U h9DNtgf/UQGqI/+Kph8HZ1JIItK/ehOxXB2Mdri696TzgJ0rXHJQhfIKkU4I4rBv E090LWqJ0GazdpAEOFmf0YTBVBlCKjzb0IWtaNUz+/6/X27xrzw5ZuGfRj+gdQWo AJNfrtDw73rpgypEg3hCxQvBGFoT6uQvfqwzEiCBDv98Tlin6L9ZJ1tInCv6B6Bo I0DS6zvWx8E99NXG847Q3lVVRCaHY7xamrF1BURt1N0D97SkR41HmEaBkDalME8g lqxVB1YKsT6GwYYKmevDEoMMFg6CHTXCegl1zTmPjR4GGEih0M6j1VD6DFPCeCMr XnkQAj4lY2XUksYi5fPhhy5x1aT6Ww== =kW6Y -----END PGP SIGNATURE----- Merge tag 'regmap-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "Just two updates this time around, a rework of max_register handling which enables us to support devices with only one register better and a new test which will be used to validate use of some new SPI optimisations which will be coming in during this merge window" * tag 'regmap-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: kunit: Add a test for ranges in combination with windows regmap: rework ->max_register handling |
||
Dave Jiang
|
debdce20c4 |
cxl/region: Deal with numa nodes not enumerated by SRAT
For the numa nodes that are not created by SRAT, no memory_target is allocated and is not managed by the HMAT_REPORTING code. Therefore hmat_callback() memory hotplug notifier will exit early on those NUMA nodes. The CXL memory hotplug notifier will need to call node_set_perf_attrs() directly in order to setup the access sysfs attributes. In acpi_numa_init(), the last proximity domain (pxm) id created by SRAT is stored. Add a helper function acpi_node_backed_by_real_pxm() in order to check if a NUMA node id is defined by SRAT or created by CFMWS. node_set_perf_attrs() symbol is exported to allow update of perf attribs for a node. The sysfs path of /sys/devices/system/node/nodeX/access0/initiators/* is created by node_set_perf_attrs() for the various attributes where nodeX is matched to the NUMA node of the CXL region. Cc: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20240308220055.2172956-13-dave.jiang@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Dave Jiang
|
11270e5262 |
base/node / ACPI: Enumerate node access class for 'struct access_coordinate'
Both generic node and HMAT handling code have been using magic numbers to indicate access classes for 'struct access_coordinate'. Introduce enums to enumerate the access0 and access1 classes shared by the two subsystems. Update the function parameters and callers as appropriate to utilize the new enum. Access0 is named to ACCESS_COORDINATE_LOCAL in order to indicate that the access class is for 'struct access_coordinate' between a target node and the nearest initiator node. Access1 is named to ACCESS_COORDINATE_CPU in order to indicate that the access class is for 'struct access_coordinate' between a target node and the nearest CPU node. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20240308220055.2172956-3-dave.jiang@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Linus Torvalds
|
0e33cf955f |
* Mitigate RFDS vulnerability
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmXvZgoACgkQaDWVMHDJ krC2Eg//aZKBp97/DSzRqXKDwJzVUr0sGJ9cii0gVT1sI+1U6ZZCh/roVH4xOT5/ HqtOOnQ+X0mwUx2VG3Yv2VPI7VW68sJ3/y9D8R4tnMEsyQ4CmDw96Pre3NyKr/Av jmW7SK94fOkpNFJOMk3zpk7GtRUlCsVkS1P61dOmMYduguhel/V20rWlx83BgnAY Rf/c3rBjqe8Ri3rzBP5icY/d6OgwoafuhME31DD/j6oKOh+EoQBvA4urj46yMTMX /mrK7hCm/wqwuOOvgGbo7sfZNBLCYy3SZ3EyF4beDERhPF1DaSvCwOULpGVJroqu SelFsKXAtEbYrDgsan+MYlx3bQv43q7PbHska1gjkH91plO4nAsssPr5VsusUKmT sq8jyBaauZb40oLOSgooL4RqAHrfs8q5695Ouwh/DB/XovMezUI1N/BkpGFmqpJI o2xH9P5q520pkB8pFhN9TbRuFSGe/dbWC24QTq1DUajo3M3RwcwX6ua9hoAKLtDF pCV5DNcVcXHD3Cxp0M5dQ5JEAiCnW+ZpUWgxPQamGDNW5PEvjDmFwql2uWw/qOuW lkheOIffq8ejUBQFbN8VXfIzzeeKQNFiIcViaqGITjIwhqdHAzVi28OuIGwtdh3g ywLzSC8yvyzgKrNBgtFMr3ucKN0FoPxpBro253xt2H7w8srXW64= =5V9t -----END PGP SIGNATURE----- Merge tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RFDS mitigation from Dave Hansen: "RFDS is a CPU vulnerability that may allow a malicious userspace to infer stale register values from kernel space. Kernel registers can have all kinds of secrets in them so the mitigation is basically to wait until the kernel is about to return to userspace and has user values in the registers. At that point there is little chance of kernel secrets ending up in the registers and the microarchitectural state can be cleared. This leverages some recent robustness fixes for the existing MDS vulnerability. Both MDS and RFDS use the VERW instruction for mitigation" * tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests x86/rfds: Mitigate Register File Data Sampling (RFDS) Documentation/hw-vuln: Add documentation for RFDS x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set |
||
|
Linus Torvalds
|
4527e83780 |
Updates for the MSI interrupt subsystem and RISC-V initial MSI support:
- Core and platform-MSI
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
- Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
-----BEGIN PGP SIGNATURE-----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=7aXj
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI interrupt subsystem and initial RISC-V MSI
support.
The core changes have been adopted from previous work which converted
ARM[64] to the new per device MSI domain model, which was merged to
support multiple MSI domain per device. The ARM[64] changes are being
worked on too, but have not been ready yet. The core and platform-MSI
changes have been split out to not hold up RISC-V and to avoid that
RISC-V builds on the scheduled for removal interfaces.
The core support provides new interfaces to handle wire to MSI bridges
in a straight forward way and introduces new platform-MSI interfaces
which are built on top of the per device MSI domain model.
Once ARM[64] is converted over the old platform-MSI interfaces and the
related ugliness in the MSI core code will be removed.
The actual MSI parts for RISC-V were finalized late and have been
post-poned for the next merge window.
Drivers:
- Add a new driver for the Andes hart-level interrupt controller
- Rework the SiFive PLIC driver to prepare for MSI suport
- Expand the RISC-V INTC driver to support the new RISC-V AIA
controller which provides the basis for MSI on RISC-V
- A few fixup for the fallout of the core changes"
* tag 'irq-msi-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
irqchip/riscv-intc: Fix low-level interrupt handler setup for AIA
x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search
genirq/matrix: Dynamic bitmap allocation
irqchip/riscv-intc: Add support for RISC-V AIA
irqchip/sifive-plic: Improve locking safety by using irqsave/irqrestore
irqchip/sifive-plic: Parse number of interrupts and contexts early in plic_probe()
irqchip/sifive-plic: Cleanup PLIC contexts upon irqdomain creation failure
irqchip/sifive-plic: Use riscv_get_intc_hwnode() to get parent fwnode
irqchip/sifive-plic: Use devm_xyz() for managed allocation
irqchip/sifive-plic: Use dev_xyz() in-place of pr_xyz()
irqchip/sifive-plic: Convert PLIC driver into a platform driver
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
genirq/irqdomain: Don't call ops->select for DOMAIN_BUS_ANY tokens
irqchip/imx-intmux: Handle pure domain searches correctly
genirq/msi: Provide MSI_FLAG_PARENT_PM_DEV
genirq/irqdomain: Reroute device MSI create_mapping
genirq/msi: Provide allocation/free functions for "wired" MSI interrupts
genirq/msi: Optionally use dev->fwnode for device domain
genirq/msi: Provide DOMAIN_BUS_WIRED_TO_MSI
...
|
||
Pawan Gupta
|
8076fcde01 |
x86/rfds: Mitigate Register File Data Sampling (RFDS)
RFDS is a CPU vulnerability that may allow userspace to infer kernel stale data previously used in floating point registers, vector registers and integer registers. RFDS only affects certain Intel Atom processors. Intel released a microcode update that uses VERW instruction to clear the affected CPU buffers. Unlike MDS, none of the affected cores support SMT. Add RFDS bug infrastructure and enable the VERW based mitigation by default, that clears the affected buffers just before exiting to userspace. Also add sysfs reporting and cmdline parameter "reg_file_data_sampling" to control the mitigation. For details see: Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> |
||
|
Linus Torvalds
|
1ddeeb2a05 |
for-6.9/block-20240310
-----BEGIN PGP SIGNATURE-----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=WlVL
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD pull requests via Song:
- Cleanup redundant checks (Yu Kuai)
- Remove deprecated headers (Marc Zyngier, Song Liu)
- Concurrency fixes (Li Lingfeng)
- Memory leak fix (Li Nan)
- Refactor raid1 read_balance (Yu Kuai, Paul Luse)
- Clean up and fix for md_ioctl (Li Nan)
- Other small fixes (Gui-Dong Han, Heming Zhao)
- MD atomic limits (Christoph)
- NVMe pull request via Keith:
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)
- Improvement and cleanup for cached request handling (Christoph)
- Moving towards atomic queue limits. Core changes and driver bits so
far (Christoph)
- Fix UAF issues in aoeblk (Chun-Yi)
- Zoned fix and cleanups (Damien)
- s390 dasd cleanups and fixes (Jan, Miroslav)
- Block issue timestamp caching (me)
- noio scope guarding for zoned IO (Johannes)
- block/nvme PI improvements (Kanchan)
- Ability to terminate long running discard loop (Keith)
- bdev revalidation fix (Li)
- Get rid of old nr_queues hack for kdump kernels (Ming)
- Support for async deletion of ublk (Ming)
- Improve IRQ bio recycling (Pavel)
- Factor in CPU capacity for remote vs local completion (Qais)
- Add shared_tags configfs entry for null_blk (Shin'ichiro
- Fix for a regression in page refcounts introduced by the folio
unification (Tony)
- Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid,
Ricardo, Roman, Tang, Uwe)
* tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits)
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
block/swim: Convert to platform remove callback returning void
cdrom: gdrom: Convert to platform remove callback returning void
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
bcache: move calculation of stripe_size and io_opt into bcache_device_init
virtio_blk: Do not use disk_set_max_open/active_zones()
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
block: move capacity validation to blkpg_do_ioctl()
block: prevent division by zero in blk_rq_stat_sum()
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
...
|
||
Rafael J. Wysocki
|
7874b581c7 |
Merge branch 'pm-runtime'
Merge changes related to the runtime power management of devices for 6.9-rc1: - Simplify pm_runtime_get_if_active() usage and add a replacement for pm_runtime_put_autosuspend() (Sakari Ailus). - Add a tracepoint for runtime_status changes tracking (Vilas Bhat). - Fix section title markdown in the runtime PM documentation (Yiwei Lin). * pm-runtime: Documentation: PM: Fix runtime_pm.rst markdown syntax PM: runtime: add tracepoint for runtime_status changes PM: runtime: Add pm_runtime_put_autosuspend() replacement PM: runtime: Simplify pm_runtime_get_if_active() usage |
||
|
Rafael J. Wysocki
|
86b84bdd5c |
Merge branch 'pm-sleep'
Merge changes related to system-wide power management for 6.9-rc1: - Fix and clean up system suspend statistics collection (Rafael Wysocki). - Simplify device suspend and resume handling in the power management core code (Rafael Wysocki). - Add support for LZ4 compression algorithm to the hibernation image creation and loading code (Nikhil V). - Fix PCI hibernation support description (Yiwei Lin). - Make hibernation take set_memory_ro() return values into account as appropriate (Christophe Leroy). - Set mem_sleep_current during kernel command line setup to avoid an ordering issue with handling it (Maulik Shah). - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a driver's system suspend callback (Qingliang Li). * pm-sleep: (21 commits) PM: sleep: wakeirq: fix wake irq warning in system suspend PM: suspend: Set mem_sleep_current during kernel command line setup PM: hibernate: Don't ignore return from set_memory_ro() PM: hibernate: Support to select compression algorithm Documentation: PM: Fix PCI hibernation support description PM: hibernate: Add support for LZ4 compression for hibernation PM: hibernate: Move to crypto APIs for LZO compression PM: hibernate: Rename lzo* to make it generic PM: sleep: Call dpm_async_fn() directly in each suspend phase PM: sleep: Move devices to new lists earlier in each suspend phase PM: sleep: Move some assignments from under a lock PM: sleep: stats: Log errors right after running suspend callbacks PM: sleep: stats: Use locking in dpm_save_failed_dev() PM: sleep: stats: Call dpm_save_failed_step() at most once per phase PM: sleep: stats: Define suspend_stats next to the code using it PM: sleep: stats: Use unsigned int for success and failure counters PM: sleep: stats: Use an array of step failure counters PM: sleep: stats: Use array of suspend step names PM: sleep: Relocate two device PM core functions PM: sleep: Simplify dpm_suspended_list walk in dpm_resume() ... |
||
Nícolas F. R. A. Prado
|
6aeb8850e0 |
device: core: Log warning for devices pending deferred probe on timeout
Once the deferred probe timeout has elapsed it is very likely that the devices that are still deferring probe won't ever be probed. Therefore log the defer probe pending reason at the warning level instead to bring attention to the issue. Signed-off-by: "Nícolas F. R. A. Prado" <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20240305-device-probe-error-v1-3-a06d8722bf19@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Nícolas F. R. A. Prado
|
448af2d288 |
driver: core: Use dev_* instead of pr_* so device metadata is added
Use the dev_* instead of the pr_* functions to log the status of device probe so that the log message gets the device metadata attached to it. Signed-off-by: "Nícolas F. R. A. Prado" <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20240305-device-probe-error-v1-2-a06d8722bf19@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Nícolas F. R. A. Prado
|
32de4b4f9d |
driver: core: Log probe failure as error and with device metadata
Drivers can return -ENODEV or -ENXIO from their probe to reject a device match, and return -EPROBE_DEFER if probe should be retried. Any other error code is not expected during normal behavior and indicates an issue occurred, so it should be logged at the error level. Also make use of the device variant, dev_err(), so that the device metadata is attached to the log message. Signed-off-by: "Nícolas F. R. A. Prado" <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20240305-device-probe-error-v1-1-a06d8722bf19@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Saravana Kannan
|
b7e1241d8f |
driver core: Add FWLINK_FLAG_IGNORE to completely ignore a fwnode link
A fwnode link between specific supplier-consumer fwnodes can be added multiple times for multiple reasons. If that dependency doesn't exist, deleting the fwnode link once doesn't guarantee that it won't get created again. So, add FWLINK_FLAG_IGNORE flag to mark a fwnode link as one that needs to be completely ignored. Since a fwnode link's flags is an OR of all the flags passed to all the fwnode_link_add() calls to create that specific fwnode link, the FWLINK_FLAG_IGNORE flag is preserved and can be used to mark a fwnode link as on that need to be completely ignored until it is deleted. Signed-off-by: Saravana Kannan <saravanak@google.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240305050458.1400667-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Saravana Kannan
|
75cde56a5b |
driver core: Adds flags param to fwnode_link_add()
Allow the callers to set fwnode link flags when adding fwnode links. Signed-off-by: Saravana Kannan <saravanak@google.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240305050458.1400667-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Andy Shevchenko
|
4dc3d612ee |
device property: Don't use "proxy" headers
Update header inclusions to follow IWYU (Include What You Use) principle. Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240301180138.271590-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Andy Shevchenko
|
1c4002aeab |
driver core: Move fw_devlink stuff to where it belongs
A few APIs, i.e. fwnode_is_ancestor_of(), fwnode_get_next_parent_dev(), and get_dev_from_fwnode(), that belong specifically to the fw_devlink APIs, may be static, but they are not. Resolve this mess by moving them to the driver/base/core where the all users are being resided and make static. No functional changes intended. Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240301180138.271590-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Mukesh Ojha
|
1fe6e4f0b0 |
firmware_loader: Suppress warning on FW_OPT_NO_WARN flag
Some of the warnings are still being printed even if FW_OPT_NO_WARN is passed for some of the function e.g., firmware_request_nowarn(). Fix it by adding a check for FW_OPT_NO_WARN before printing the warning. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20240219163954.7719-1-quic_mojha@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Christophe JAILLET
|
822d66c45e |
platform-msi: Remove usage of the deprecated ida_simple_xx() API
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). Note that the upper limit of ida_simple_get() is exclusive, but the one of ida_alloc_max() is inclusive. So a -1 has been added when needed. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/fd87836efa894aee0ae43e767369c85a2ee7e1ff.1705733916.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
Ricardo B. Marliere
|
f8c7511db0 |
block: make block_class constant
Since commit
|
||
Qingliang Li
|
e7a7681c85 |
PM: sleep: wakeirq: fix wake irq warning in system suspend
When driver uses pm_runtime_force_suspend() as the system suspend callback
function and registers the wake irq with reverse enable ordering, the wake
irq will be re-enabled when entering system suspend, triggering an
'Unbalanced enable for IRQ xxx' warning. In this scenario, the call
sequence during system suspend is as follows:
suspend_devices_and_enter()
-> dpm_suspend_start()
-> dpm_run_callback()
-> pm_runtime_force_suspend()
-> dev_pm_enable_wake_irq_check()
-> dev_pm_enable_wake_irq_complete()
-> suspend_enter()
-> dpm_suspend_noirq()
-> device_wakeup_arm_wake_irqs()
-> dev_pm_arm_wake_irq()
To fix this issue, complete the setting of WAKE_IRQ_DEDICATED_ENABLED flag
in dev_pm_enable_wake_irq_complete() to avoid redundant irq enablement.
Fixes:
|
||
|
Mark Brown
|
bb92804ba2
|
regmap: kunit: Add a test for ranges in combination with windows
In preparation for taking advantage of the SPI support for pre-coooked messages add a test case covering the use of windows on a raw regmap, unfortunately the parameterisation prevents direct reuse and we will want to add some raw specific coverage anyway. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://msgid.link/r/20240225-regmap-test-format-v1-1-41e4fdfb1c1f@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Baoquan He
|
02aff84805 |
crash: split crash dumping code out from kexec_core.c
Currently, KEXEC_CORE select CRASH_CORE automatically because crash codes need be built in to avoid compiling error when building kexec code even though the crash dumping functionality is not enabled. E.g -------------------- CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_KEXEC=y CONFIG_KEXEC_FILE=y --------------------- After splitting out crashkernel reservation code and vmcoreinfo exporting code, there's only crash related code left in kernel/crash_core.c. Now move crash related codes from kexec_core.c to crash_core.c and only build it in when CONFIG_CRASH_DUMP=y. And also wrap up crash codes inside CONFIG_CRASH_DUMP ifdeffery scope, or replace inappropriate CONFIG_KEXEC_CORE ifdef with CONFIG_CRASH_DUMP ifdef in generic kernel files. With these changes, crash_core codes are abstracted from kexec codes and can be disabled at all if only kexec reboot feature is wanted. Link: https://lkml.kernel.org/r/20240124051254.67105-5-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Pingfan Liu <piliu@redhat.com> Cc: Klara Modin <klarasmodin@gmail.com> Cc: Michael Kelley <mhklinux@outlook.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Vilas Bhat
|
015abee404 |
PM: runtime: add tracepoint for runtime_status changes
Existing runtime PM ftrace events (`rpm_suspend`, `rpm_resume`, `rpm_return_int`) offer limited visibility into the exact timing of device runtime power state transitions, particularly when asynchronous operations are involved. When the `rpm_suspend` or `rpm_resume` functions are invoked with the `RPM_ASYNC` flag, a return value of 0 i.e., success merely indicates that the device power state request has been queued, not that the device has yet transitioned. A new ftrace event, `rpm_status`, is introduced. This event directly logs the `power.runtime_status` value of a device whenever it changes providing granular tracking of runtime power state transitions regardless of synchronous or asynchronous `rpm_suspend` / `rpm_resume` usage. Signed-off-by: Vilas Bhat <vilasbhat@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
Huang Ying
|
5cec4eb7fa |
mm and cache_info: remove unnecessary CPU cache info update
For each CPU hotplug event, we will update per-CPU data slice size and
corresponding PCP configuration for every online CPU to make the
implementation simple. But, Kyle reported that this takes tens seconds
during boot on a machine with 34 zones and 3840 CPUs.
So, in this patch, for each CPU hotplug event, we only update per-CPU data
slice size and corresponding PCP configuration for the CPUs that share
caches with the hotplugged CPU. With the patch, the system boot time
reduces 67 seconds on the machine.
Link: https://lkml.kernel.org/r/20240126081944.414520-1-ying.huang@intel.com
Fixes:
|
||
Sumanth Korikkar
|
c5f1e2d189 |
mm/memory_hotplug: introduce MEM_PREPARE_ONLINE/MEM_FINISH_OFFLINE notifiers
Patch series "implement "memmap on memory" feature on s390".
This series provides "memmap on memory" support on s390 platform. "memmap
on memory" allows struct pages array to be allocated from the hotplugged
memory range instead of allocating it from main system memory.
s390 currently preallocates struct pages array for all potentially
possible memory, which ensures memory onlining always succeeds, but with
the cost of significant memory consumption from the available system
memory during boottime. In certain extreme configuration, this could lead
to ipl failure.
"memmap on memory" ensures struct pages array are populated from self
contained hotplugged memory range instead of depleting the available
system memory and this could eliminate ipl failure on s390 platform.
On other platforms, system might go OOM when the physically hotplugged
memory depletes the available memory before it is onlined. Hence, "memmap
on memory" feature was introduced as described in commit
|
||
Greg Kroah-Hartman
|
07749061b8 |
Linux 6.8-rc5
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXSbvkeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGi3kH/iM5AcKeQfee07to TJP3WORLBt5UrUMgAQbJdNAruCj6brHA6YnZ6AjdhdNZ41RO06h69kTpb+y/CYJz +ogGK5qhWsC8ETM6rJCioo8uI4GU70p84fGiMfLw8o6vUvmtyI5qH3531Y30Edxt qqMVtQrVe9J5JcHQjJ/mQo8nAuvZdQQGM90zLGqFP+JheP3CzsCokraIITqoebDC PCVAsnSbXT/uMjwSr03kdnMnnY++fxz/TyHb/QRMPq/4xU8nz0Z2hlOOYrVkOINu lkIYtCDGTk0QR3hdDiO9yt+k1OsWi+oBkrhjAQmAk9x3riiXq1NKvZZLDArt7PH5 gSyo9sE= =h5Ei -----END PGP SIGNATURE----- Merge 6.8-rc5 into driver-core-next We need the driver core changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Linus Torvalds
|
ced5905231 |
Driver core fixes for 6.8-rc5
Here are some driver core fixes, a kobject fix, and a documentation
update for 6.8-rc5. In detail these changes are:
- devlink fixes for reported issues with 6.8-rc1
- topology scheduling regression fix that has been reported by many
- kobject loosening of checks change in -rc1 is now reverted as some
codepaths seemed to need the checks
- documentation update for the CVE process. Has been reviewed by
many, the last minute change to the document was to bring the .rst
format back into the the new style rules, the contents did not
change.
All of these, except for the documentation update, have been in
linux-next for over a week. The documentation update has been reviewed
for weeks by a group of developers, and in public for a week and the
wording has stabilized for now. If future changes are needed, we can do
so before 6.8-final is out (or anytime after that.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZdC7Eg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykMaQCgnFRIta+T0yxCftMfSxqEcMeDLcsAoIM7v7WK
krcgNVRuERcuJfHIoS6u
=jshL
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some driver core fixes, a kobject fix, and a documentation
update for 6.8-rc5. In detail these changes are:
- devlink fixes for reported issues with 6.8-rc1
- topology scheduling regression fix that has been reported by many
- kobject loosening of checks change in -rc1 is now reverted as some
codepaths seemed to need the checks
- documentation update for the CVE process. Has been reviewed by
many, the last minute change to the document was to bring the .rst
format back into the the new style rules, the contents did not
change.
All of these, except for the documentation update, have been in
linux-next for over a week. The documentation update has been reviewed
for weeks by a group of developers, and in public for a week and the
wording has stabilized for now. If future changes are needed, we can
do so before 6.8-final is out (or anytime after that)"
* tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: Document the Linux Kernel CVE process
Revert "kobject: Remove redundant checks for whether ktype is NULL"
driver core: fw_devlink: Improve logs for cycle detection
driver core: fw_devlink: Improve detection of overlapping cycles
driver core: Fix device_link_flag_is_sync_state_only()
topology: Set capacity_freq_ref in all cases
|