This patch removes the releasing of the "struct dlm ls" resource out of
the kobject handling. Instead we run kfree() after kobject_put() of the
lockspace kobject structure that should always being the last put call.
This prepares to split the releasing of all lockspace resources
asynchronously in the background and just deregister everything in
release_lockspace().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds a warn on if is_master() and dlm_is_removed() checks on
invalid nodeid states that are probably not what the caller wants to do
here. The is_master() function checking on r->res_nodeid is invalid when
it is set to -1, whereas the dlm_is_removed() has a different meaning
as "nodeid member" and also 0 is invalid.
We run into these cases and this patch changes those cases as we never
will run into them. There should be no functional changes as the
condition should return the same result. However this patch signals now
on caller level that there might be an "extra" case to handle here.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch will remote the return of an invalid nodeid value when
local_comm is not set. This case should never happen as the DLM stack
tries to compare valid nodeids with an invalid nodeid returned by
dlm_our_nodeid(). Instead we let it crash to getting at least recognized
if we running into such state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes unnecessary refcounts that are obviously not
necessary because either when the pointer is passed as parameter or it
is part of a list we should already hold a reference to it.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a unnecessary parameter from DLM memory allocation
helpers and reduce some functions by just directly reply the pointer
address of the allocated memory.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In the case we trigger dlm_free_rsb() that does a call_rcu() and the
responding kfree() of res_lvbptr and a kmem_cache_free() of the rsb
pointer we need to wait until this pending operation is done before
calling kmem_cache_destroy(). We doing that by using rcu_barrier() that
waits until all pending call_rcu() are done. This avoids that
kmem_cache_destroy() complains about active objects around that are not
being freed yet by call_rcu().
There is currently more discussions about to make this behaviour better,
see:
https://lore.kernel.org/netdev/20240609082726.32742-1-Julia.Lawall@inria.fr/
However this is only for call_rcu() if the callback calls
kmem_cache_destroy() only to replace it by kfree_rcu() call which has
currently some issue. This isn't our case because we also free the
res_lvbptr if being set.
For our case, to avoid the above race rcu_barrier() should be used before
calling kmem_cache_destroy() to be sure that there are no active objects
around. This is exactly what net/batman-adv is also doing before calling their
kmem_cache_destroy() in module unloading.
Fixes: 01fdeca1cc ("dlm: use rcu to avoid an extra rsb struct lookup")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The DLM rcom handling has a check that all exflags are the same for the
whole lockspace membership nodes. There are some flags that requires
such handling, however DLM_LSFL_SOFTIRQ does not require this handling
and it should be backwards compatibility with other lockspaces that does
not set this flag.
Fixes: f328a26eeb ("dlm: introduce DLM_LSFL_SOFTIRQ_SAFE")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The last use of 'dlm_processed_nodes' was removed in
commit 1696c75f18 ("fs: dlm: add send ack threshold and append acks to
msgs").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: David Teigland <teigland@redhat.com>
When a lockspace user allows it, run callback functions directly from
softirq context, instead of queueing callbacks to be run from the
dlm_callback workqueue context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Introduce a new external lockspace flag DLM_LSFL_SOFTIRQ_SAFE. A
lockspace user will set this flag if it can handle dlm running the
callback functions from softirq context. When not set, dlm will
continue to run callback functions from the dlm_callback workqueue.
The new lockspace flag cannot be used for user space lockspaces, so
a uapi placeholder definition is used for the new flag value.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The existing external lockspace flag DLM_LSFL_FS is now also
saved as an internal flag LSFL_FS, so it can be checked from
other code locations which want to know if a lockspace is
used from the kernel or user space.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use rcu to free rsb structs, and hold the rcu read lock
while looking up rsb structs. This allows us to avoid an
extra hash table lookup for an rsb. A new rsb flag HASHED
is added which is set while the rsb is in the hash table.
This flag is checked in place of repeating the hash table
lookup.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Remove a few calls to add_scan() and del_scan() in cases where
the rsb is a dir record, so the rsb should never be placed on
the scan list at all. Add WARN_ON to catch cases where this
is done.
Signed-off-by: David Teigland <teigland@redhat.com>
The old terminology of "toss" and "keep" is no longer an
accurate description of the rsb states and lists, so change
the names to "inactive" and "active". The old names had
also been copied into the scanning code, which is changed
back to use the "scan" name.
- "active" rsb structs have lkb's attached, and are ref counted.
- "inactive" rsb structs have no lkb's attached, are not ref counted.
- "scan" list is for rsb's that can be freed after a timeout period.
- "slow" lists are for infrequent iterations through active or
inactive rsb structs.
- inactive rsb structs that are directory records will not be put
on the scan list, since they are not freed based on timeouts.
- inactive rsb structs that are not directory records will be
put on the scan list to be freed, since they are not longer needed.
Signed-off-by: David Teigland <teigland@redhat.com>
According to kdoc idr is deprecated and xarrays should be used nowadays.
This patch is moving the recover idr implementation to xarray
datastructure.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
According to kernel doc idr is deprecated and xarrays should be used
nowadays. This patch is moving the lkb idr implementation to xarrays.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch drops the own written rsb pre allocation mechanism as this is
already done by using kmem caches, we don't need another layer on top of
that to running some pre allocation scheme.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes ls_local_handle from struct dlm_ls as it stores the
ls pointer of the top level structure itesef and this isn't necessary.
There is a lookup functionality to lookup the lockspace in
dlm_find_lockspace_local() but the given input parameter is the pointer
already. This might be more safe to lookup a lockspace but given a wrong
lockspace pointer is a bug in the code and we save the additional lookup
here. The dlm_ls structure can be still hidden by using dlm_lockspace_t
handle pointer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes an parameter which is currently not used by
dlm_midcomms_addr().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a kref_init() that isn't necessary because the rsb is
created for toss list. Under toss list the rsb should not have any
reference counting logic. If in theory the rsb gets to into keep list
then a kref_init() for res_ref will be initiated.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes some leftover related code from dlm_scand that was
dropped in commit b1f2381c1a ("dlm: drop dlm_scand kthread and use
timers").
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes to return -ENOMEM in case of an allocation failure that
was forgotten to change in commit 6c648035cb ("dlm: switch to use
rhashtable for rsbs").
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202404200536.jGi6052v-lkp@intel.com/
Fixes: 6c648035cb ("dlm: switch to use rhashtable for rsbs")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the orphans mutex to a spinlock since commit
c288745f1d ("dlm: avoid blocking receive at the end of recovery") is
using a rwlock_t to lock the DLM message receive path and do_purge() can
be called while this lock is held that forbids to sleep.
We need to use spin_lock_bh() because also a user context that calls
dlm_user_purge() can call do_purge() and since commit 92d59adfaf
("dlm: do message processing in softirq context") the DLM message
receive path is done under softirq context.
Fixes: c288745f1d ("dlm: avoid blocking receive at the end of recovery")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/gfs2/9ad928eb-2ece-4ad9-a79c-d2bce228e4bc@moroto.mountain/
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Convert the lock for lkbidr to an rwlock. Most idr lookups will use
the read lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The conversion to rhashtable introduced a hash table lock per lockspace,
in place of per bucket locks. To make this more scalable, switch to
using a rwlock for hash table access. The common case fast path uses
it as a read lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently the scand kthread acts like a garbage collection for expired
rsbs on toss list, to clean them up after a certain timeout. It triggers
every couple of seconds and iterates over the toss list while holding
ls_rsbtbl_lock for the whole hash bucket iteration.
To reduce the amount of time holding ls_rsbtbl_lock, we now handle the
disposal of expired rsbs using a per-lockspace timer that expires for the
earliest tossed rsb on the lockspace toss queue. This toss queue is
ordered according to the rsb res_toss_time with the earliest tossed rsb
as the first entry. The toss timer will only trylock() necessary locks,
since it is low priority garbage collection, and will rearm the timer
if trylock() fails. If the timer function does not find any expired
rsb's, it rearms the timer with the next earliest expired rsb.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In the past we had problems when an rsb had a reference counter greater
than one while in the toss state. An rsb in the toss state is not
actively used for locking, and should not have any other references
apart from the single ref keeping it on the rsb hash. Shift to freeing
rsb's directly rather than using kref_put to free them, since the ref
counting is not meant to be used in this state. Add warnings if ref
counting is seen while an rsb is in the toss state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace our own hash table with the more advanced rhashtable
for keeping rsb structs.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
To prepare for using rhashtable, add two rsb lists for iterating
through rsb's in two uncommon cases where this is necesssary:
- when dumping rsb state from debugfs, now using seq_list.
- when looking at all rsb's during recovery.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There are several places where lock processing can perform two hash table
lookups, first in the "keep" list, and if not found, in the "toss" list.
This patch introduces a new rsb state flag "RSB_TOSS" to represent the
difference between the state of being on keep vs toss list, so that the
two lists can be combined. This avoids cases of two lookups.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Prepare to replace our own hash table with rhashtable by replacing
the per-bucket locks in our own hash table with a single lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Increment the ls_count value while dlm_scand is processing a
lockspace so that release_lockspace()/remove_lockspace() will
wait for dlm_scand to finish.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Move dlm message processing from an ordered workqueue context to an
ordered softirq context. Handling dlm messages in softirq will allow
requests to be cleared more quickly and efficiently, and should avoid
longer queues of incomplete requests. Later patches are expected to
run completion/blocking callbacks directly from this message processing
context, further reducing context switches required to complete a request.
In the longer term, concurrent message processing could be implemented.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use spin_lock_bh for all spinlocks involved in message processing,
in preparation for softirq message processing. DLM lock requests
from user space involve dlm processing in user context, in addition
to the standard kernel context, necessitating bh variants.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Remove an explicit schedule() call in the message processing path,
in preparation for softirq message processing.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Convert ls_recv_active rw_semaphore to an rwlock to avoid
sleeping, in preparation for softirq message processing.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The end of the recovery process transitioned to normal message
processing by temporarily blocking the receiving context,
processing saved messages, then unblocking the receiving
context. To avoid blocking the receiving context, the old
wait_queue and mutex are replaced by a new rwlock and the new
RECV_MSG_BLOCKED flag. Received messages are added to the
list of saved messages, protected by the rwlock, until the
flag is cleared, which happens when all saved messages have
been processed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Convert the rsb struct res_lock from a mutex to a spinlock
in preparation for processing messages in softirq context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Convert the waiters mutex to a spinlock in prepration for
processing messages in softirq context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The waiters_mutex no longer needs to be used in the waiters recovery
functions dlm_recover_waiters_pre() and dlm_recover_waiters_pre().
During recovery, ordinary locking operations are paused, and the
recovery thread is the only context accessing the waiters list,
so the lock is not needed.
Access to the waiters list from debugfs functions is avoided by
taking the top level recovery lock in the debugfs dump function.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Add a new struct to save the current position in the rsb masters_list
while sending the rsb names to other nodes. The rsb names are sent in
multiple chunks, and for each new chunk, the new "dlm_dir_dump" struct
saves the last position in the masters_list. The new struct is also
used to save more information to sanity check the recovery process.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Move the rsb root_list from the lockspace to a stack variable since
it is now only used by the ls_recover() function.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Add a new "masters_list" for master rsb structs, with a new
rwlock. The new list is created and used during the recovery
process to send the master rsb names to new nodes. With this
change, the current "root_list" can be used without locking.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Move dlm_create_root_list() and dlm_release_root_list() to
recover.c and declare them static because they are only used
there.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace GFP_NOFS with GFP_ATOMIC. Also stop using idr_preload which
uses a non-bh spin_lock. This is further preparation for softirq
message processing.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Remove the context parameter for message allocations and
always use GFP_ATOMIC. This prepares for softirq message
processing.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Acked-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Get rid of the unnecessary refcounting on callback structs.
Copy interesting callback info into the lkb struct rather
than maintaining pointers to callback structs from the lkb.
This goes back to the way things were done prior to
commit 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks").
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the following issue:
node 1 is dir
node 2 is master
node 3 is other
1->2: unlock
2: put final lkb, rsb moved to toss
2->1: unlock_reply
1: queue lkb callback with EUNLOCK
2->1: remove
1: receive_remove ignored (rsb on keep because of queued lkb callback)
1: complete lkb callback, put_lkb, move rsb to toss
3->1: lookup
1->3: lookup_reply master=2
3->2: request
2->3: request_reply EBADR
In summary:
An unexpected lkb reference causes the rsb to remain on the wrong list.
The rsb being on the wrong list causes receive_remove to be ignored.
An ignored receive_remove causes inconsistent dir and master state.
This sequence requires an unusually long delay in delivering the unlock
callback, because the remove message from 2->1 usually happens after
some seconds. So, it's not known exactly how frequently this sequence
occurs in pratice. It's possible that the same end result could also
have another unknown cause.
The solution for this issue is to further separate callback state
from the lkb, so that an lkb reference (and from that, an rsb ref)
are not held while a callback remains queued. Then, within the
unlock_reply, the lkb will be freed and the rsb moved to the toss
list. So, the receive_remove will not be ignored.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch combines the failure and default cases for enqueue and
dequeue a callback to the lkb callback queue that should end in both
cases as it should never happen.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
