Commit Graph

2106 Commits

Author SHA1 Message Date
Linus Torvalds
41844e3620 Staging/IIO patches for 4.9-rc1
Here is the big staging and IIO driver pull request for 4.9-rc1.
 
 There are a lot of patches in here, the majority due to the
 drivers/staging/greybus/ subsystem being merged in with full development
 history that went back a few years, in order to preserve the work that
 those developers did over time.  This was done the same way that btrfs
 was merged into the tree, so all should be ok there.
 
 Lots and lots of tiny cleanups happened in the tree as well, due to the
 Outreachy application process and lots of other developers showing up
 for the first time to clean code up.  Along with those changes, we
 deleted a wireless driver, and added a raspberrypi driver (currently
 marked broken), and lots of new iio drivers.
 
 Overall the tree still shrunk with more lines removed than added, about
 10 thousand lines removed in total.  Full details are in the very long
 shortlog below.
 
 All of this has been in the linux-next tree with no issues.  There will
 be some merge problems with other subsystem trees, but those are all
 minor problems and shouldn't be hard to work out when they happen
 (MAINTAINERS and some lustre build problems with the IB tree.)
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFYEABECABYFAlf0qWIPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfsp9GkAoLMa
 Dl/S8W02azDtKP893es5GXh3AJ4k8J9JlHgTS0RlzVJMvzkSZ2x7Vg==
 =j18s
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the big staging and IIO driver pull request for 4.9-rc1.

  There are a lot of patches in here, the majority due to the
  drivers/staging/greybus/ subsystem being merged in with full
  development history that went back a few years, in order to preserve
  the work that those developers did over time.

  Lots and lots of tiny cleanups happened in the tree as well, due to
  the Outreachy application process and lots of other developers showing
  up for the first time to clean code up.  Along with those changes, we
  deleted a wireless driver, and added a raspberrypi driver (currently
  marked broken), and lots of new iio drivers.

  Overall the tree still shrunk with more lines removed than added,
  about 10 thousand lines removed in total. Full details are in the very
  long shortlog below.

  All of this has been in the linux-next tree with no issues. There will
  be some merge problems with other subsystem trees, but those are all
  minor problems and shouldn't be hard to work out when they happen
  (MAINTAINERS and some lustre build problems with the IB tree)"

And furter from me asking for clarification about greybus:
 "Right now there is a phone from Motorola shipping with this code (a
  slightly older version, but the same tree), so even though Ara is not
  alive in the same form, the functionality is happening. We are working
  with the developers of that phone to merge the newer stuff in with
  their fork so they can use the upstream version in future versions of
  their phone product line.

  Toshiba has at least one chip shipping in their catalog that
  needs/uses this protocol over a Unipro link, and rumor has it that
  there might be more in the future.

  There are also other users of the greybus protocols, there is a talk
  next week at ELC that shows how it is being used across a network
  connection to control a device, and previous ELC talks have showed the
  protocol stack being used over USB to drive embedded Linux boards.
  I've also talked to some people who are starting to work to add a host
  controller driver to control arduinos as the greybus PHY protocols are
  very useful to control a serial/i2c/spio/whatever device across a
  random physical link, as it is a way to have a self-describing device
  be attached to a host without needing manual configuration.

  So yes, people are using it, and there is still the chance that it
  will show up in a phone/laptop/tablet/whatever from Google in the
  future as well, the tech isn't dead, even if the original large phone
  project happens to be"

* tag 'staging-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (3703 commits)
  Staging: fbtft: Fix bug in fbtft-core
  staging: rtl8188eu: fix double unlock error in rtw_resume_process()
  staging:r8188eu: remove GEN_MLME_EXT_HANDLER macro
  staging:r8188eu: remove GEN_DRV_CMD_HANDLER macro
  staging:r8188eu: remove GEN_EVT_CODE macro
  staging:r8188eu: remove GEN_CMD_CODE macro
  staging:r8188eu: remove pkt_newalloc member of the recv_buf structure
  staging:r8188eu: remove rtw_handle_dualmac declaration
  staging:r8188eu: remove (RGTRY|BSSID)_(OFT|SZ) macros
  staging:r8188eu: change rtl8188e_process_phy_info function argument type
  Staging: fsl-mc: Remove blank lines
  Staging: fsl-mc: Fix unaligned * in block comments
  Staging: comedi: Align the * in block comments
  Staging : ks7010 : Fix block comments warninig
  Staging: vt6655: Remove explicit NULL comparison using Coccinelle
  staging: rtl8188eu: core: rtw_xmit: Use macros instead of constants
  staging: rtl8188eu: core: rtw_xmit: Move constant of the right side
  staging: dgnc: Fix lines longer than 80 characters
  Staging: dgnc: constify attribute_group structures
  Staging: most: hdm-dim2: constify attribute_group structures
  ...
2016-10-05 14:50:51 -07:00
Linus Torvalds
7a53eea1f7 Char/Misc driver update for 4.9-rc1
Here's the "big" char and misc driver update for 4.9-rc1.
 
 Lots of little things here, all over the driver tree for subsystems that
 flow through me.  Nothing major that I can discern, full details are in
 the shortlog.
 
 All have been in the linux-next tree with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFUEABECABYFAlfyOIQPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfsp9OQAlRy3
 gSKfQUlXjTs96Bx/I5PtWysAn0r8nyKZoP1oSgsTddOCEeXngTXc
 =4uPs
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the "big" char and misc driver update for 4.9-rc1.

  Lots of little things here, all over the driver tree for subsystems
  that flow through me. Nothing major that I can discern, full details
  are in the shortlog.

  All have been in the linux-next tree with no reported issues"

* tag 'char-misc-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (144 commits)
  drivers/misc/hpilo: Changes to support new security states in iLO5 FW
  at25: fix debug and error messaging
  misc/genwqe: ensure zero initialization
  vme: fake: remove unexpected unlock in fake_master_set()
  vme: fake: mark symbols static where possible
  spmi: pmic-arb: Return an error code if sanity check fails
  Drivers: hv: get rid of id in struct vmbus_channel
  Drivers: hv: make VMBus bus ids persistent
  mcb: Add a dma_device to mcb_device
  mcb: Enable PCI bus mastering by default
  mei: stop the stall timer worker if not needed
  clk: probe common clock drivers earlier
  vme: fake: fix build for 64-bit dma_addr_t
  ttyprintk: Neaten and simplify printing
  mei: me: add kaby point device ids
  coresight: tmc: mark symbols static where possible
  coresight: perf: deal with error condition properly
  Drivers: hv: hv_util: Avoid dynamic allocation in time synch
  fpga manager: Add hardware dependency to Zynq driver
  Drivers: hv: utils: Support TimeSync version 4.0 protocol samples.
  ...
2016-10-03 19:57:49 -07:00
Peter Meerwald-Stadler
ac45e57f15 iio: light: Add driver for Silabs si1132, si1141/2/3 and si1145/6/7 ambient light, uv index and proximity sensors
The si114x supports x=1,2,3 IR LEDs for proximity sensing together with
visible and IR ambient light sensing (ALS).

Newer parts (si1132, si1145/6/7) can measure UV light and compute an UV
index
This was tested on si1143 and si1145

Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 19:56:39 +01:00
Gregor Boirie
03b262f2bb iio:pressure: initial zpa2326 barometer support
Introduce driver for Murata ZPA2326 pressure and temperature sensor:
http://www.murata.com/en-us/products/productdetail?partno=ZPA2326-0311A-R

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 19:42:21 +01:00
Hans de Goede
063e3303a9 iio: accel: Add driver for the mCube MC3230 3-axis accelerometer
Add an IIO driver for the mCube MC3230 3-axis accelerometer.

A datasheet for the mCube MC3230 can be found here:
http://www.mcubemems.com/wp-content/uploads/2014/10/MC3230_2-Datasheet-APS-048-0007v1.6.pdf

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 13:25:38 +01:00
Hans de Goede
5620318828 iio: accel: mma7660: fix missing MODULE_DEVICE_TABLE(i2c)
Add missing MODULE_DEVICE_TABLE(i2c) this fixes autoloading on
devicetree using systems.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 12:54:09 +01:00
Julia Lawall
becf05e748 iio: common: ssp_sensors: gyro: constify iio_info structures
Check for iio_info structures that are only stored in the info field of a
iio_dev structure.  This field is declared const, so iio_info structures
that have this property can be declared as const also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct iio_info i@p = { ... };

@ok@
identifier r.i;
struct iio_dev e;
position p;
@@
e.info = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct iio_info e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct iio_info i = { ... };
// </smpl>

The result of size on this file before the change is:
   text	      data     bss     dec         hex	  filename
   1245        344       0    1589         635
   drivers/iio/gyro/ssp_gyro_sensor.o

and after the change it is:
   text	     data        bss	    dec	    hex	filename
   1397       192          0       1589     635
   drivers/iio/gyro/ssp_gyro_sensor.o

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:59:51 +01:00
Julia Lawall
52ceb7731e iio: adc: men_z188_adc: constify iio_info structures
Check for iio_info structures that are only stored in the info field of a
iio_dev structure.  This field is declared const, so iio_info structures
that have this property can be declared as const also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct iio_info i@p = { ... };

@ok@
identifier r.i;
struct iio_dev e;
position p;
@@
e.info = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct iio_info e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct iio_info i = { ... };
// </smpl>

The result of size on this file before the change is:
   text	      data     bss     dec         hex	  filename
   1529	       312       0    1841         731
   drivers/iio/adc/men_z188_adc.o

and after the change it is:
   text	     data        bss	    dec	    hex	filename
   1689       168          0       1857     741
   drivers/iio/adc/men_z188_adc.o

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:58:31 +01:00
Julia Lawall
7504dfc9e9 iio: common: ssp_sensors: accel: constify iio_info structures
Check for iio_info structures that are only stored in the info field of a
iio_dev structure.  This field is declared const, so iio_info structures
that have this property can be declared as const also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct iio_info i@p = { ... };

@ok@
identifier r.i;
struct iio_dev e;
position p;
@@
e.info = &i@p;

@bad@
position p != {r.p,ok.p};
identifier r.i;
struct iio_info e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct iio_info i = { ... };
// </smpl>

The result of size on this file before the change is:
   text	      data     bss     dec         hex	  filename
   1265        344       0    1609         649
   drivers/iio/accel/ssp_accel_sensor.o

and after the change it is:
   text	     data        bss	    dec	    hex	filename
   1425	      192          0       1617     651
   drivers/iio/accel/ssp_accel_sensor.o

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:56:08 +01:00
Linus Walleij
12884004f1 iio: accel: kxsd9: Support reading a mounting matrix
This adds support for the mounting matrix to the KXSD9 driver.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:36:32 +01:00
Linus Walleij
9a9a369d61 iio: accel: kxsd9: Deploy system and runtime PM
This deploys runtime and system PM in the KXSD9 driver:

- Use the force_runtime_suspend/resume callbacks as system PM
  operations.

- Add buffer prepare/unprepare callbacks to grab the runtime
  PM while we're using buffered reads and put get/put_autosuspend
  in these.

- Insert get/put_autosuspend calls anywhere the IO is used from
  the raw read/write callbacks.

- Move the fullscale setting to be cached in the state container
  so we can restore it properly when coming back from
  system/runtime suspend.

- Set the autosuspend delay to two orders of magnitude that of
  the sensor start-up time (20ms) so we will autosuspend after
  2s.

- Register the callbacks in both the SPI and I2C subdrivers.

Tested with the I2C KXSD9 on the Qualcomm APQ8060 Dragonboard.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:35:59 +01:00
Linus Walleij
79383aaec4 iio: accel: kxsd9: Replace "parent" with "dev"
What is passed to the .probe() and .remove() functions is
technically the parent of the created IIO device but it becomes
a big confusion for the head to have it named like this since
it is usually clear from context the "dev" refers to the physical
device, and when next adding PM callbacks a clean
"struct device *dev" pointer is passed to these and that makes
it even more confused. Rename "parent" to "dev" like in most
other drivers.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:35:26 +01:00
Linus Walleij
2bb4a02aad iio: accel: kxsd9: Fetch and handle regulators
This adds supply regulator handling for the VDD and IOVDD inputs
on the KXSD9 component, makes sure to bring the regulators online
during probe and disable them on remove or the errorpath.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:33:28 +01:00
Linus Walleij
11adc2b218 iio: accel: kxsd9: Deploy proper register bit defines
There are some hardcoded register values etc in the code, define
proper bitfield definitions, and use them when getting and setting
the scale. Optimize a read/modify/write to use regmap_update_bits()
at the same time.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:32:49 +01:00
Linus Walleij
0427a106a9 iio: accel: kxsd9: Add triggered buffer handling
As is custom with all modern sensors, add a clever burst mode
that will just stream out values from the sensor and provide it
to userspace to do the proper offsetting and scaling.

This is the result when tested with an HRTimer trigger:

$ generic_buffer -a -c 10 -n kxsd9 -t foo
/sys/bus/iio/devices/iio:device1 foo
0.371318 0.718680 9.869872 1795.000000 97545896129
-0.586922 0.179670 9.378775 2398.000000 97555864721
-0.299450 0.179670 10.348992 2672.000000 97565874055
0.371318 0.335384 11.103606 2816.000000 97575883240
0.179670 0.574944 10.540640 2847.000000 97585862351
0.335384 0.754614 9.953718 2840.000000 97595872425
0.179670 0.754614 10.732288 2879.000000 97605882351
0.000000 0.754614 10.348992 2872.000000 97615891832
-0.730658 0.574944 9.570422 2831.000000 97625871536
0.000000 1.137910 10.732288 2872.000000 97635881610

Columns shown are x, y, z acceleration, so a positive acceleration
of ~9.81 (shaky due to bad calibration) along the z axis. The
fourth column is the AUX IN which is floating on this system,
it seems to float up to the 2.85V VDD voltage.

To be able to cleanup the triggered buffer, we need to add .remove()
callbacks to the I2C and SPI subdrivers and call back into an
exported .remove() callback in the core.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:32:15 +01:00
Linus Walleij
84e2f6f958 iio: accel: kxsd9: Fix up offset and scaling
This fixes several errors in the offset and scaling of the raw
values from the KXSD9 sensor:

- The code did not convert the big endian value from the sensor
  into the endianness of the host CPU. Fix this with
  be16_to_cpu() on the raw obtained value.

- The code did not regard the fact that only the upper 12 bits of
  the accelerometer values are valid. Shift these
  down four bits to yield the real raw value.

- Further the sensor provides 2048 at zero g. This means that an
  offset of 2048 must be subtracted from the raw value before
  scaling. This was not taken into account by the driver,
  yielding a weird value. Fix this by providing this offset in
  sysfs.

To house the scaling code better, the value reading code was
factored into the raw reading function.

This proper scaling and offseting is necessary to get proper
values out of triggered buffer by offsetting, shifting and scaling
them.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:31:31 +01:00
Linus Walleij
dc6ac050c7 iio: accel: kxsd9: Drop the buffer lock
The RX/TX buffers are gone so drop the lock (it should have been
in the transport struct anyway).

Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:29:48 +01:00
Linus Walleij
a483ab7969 iio: accel: kxsd9: Add I2C transport
This adds I2C regmap transport for the KXSD9 driver.
Tested on the KXSD9 sensor on the APQ8060 Dragonboard.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:29:12 +01:00
Linus Walleij
0d1fb2d52d iio: accel: kxsd9: Convert to use regmap for transport
This converts the KXSD9 driver to drop the custom transport
mechanism and just use regmap like everything else.

Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:28:21 +01:00
Linus Walleij
ab04f734b0 iio: accel: kxsd9: Do away with the write2 helper
This is just a masquerading register write function, so use the
register write function instead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:27:18 +01:00
Linus Walleij
bf96f6e80c iio: accel: kxsd9: Split out SPI transport
This moves the KXSD9 SPI transport out to its own file and Kconfig
entry, so that we will be able to add another transport method.
We export the common probe and add a local header file for the
functionality shared between the main driver and the transport
driver.

We make the SPI transport the default for the driver if SPI is
available and the KXSD9 driver was selected, so the oldconfig
upgrade path will be clear.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:26:53 +01:00
Linus Walleij
154021a317 iio: accel: kxsd9: split out a common remove() function
This makes it possible to later split the transport mechanism
using a generic probe() and a generic remove().

Use dev_set_drvdata() and dev_get_drvdata() as a paired
accessor to operate on the abstract struct device * regardless
of the transport mechanism in use.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 11:07:50 +01:00
Linus Walleij
9f9079720a iio: accel: kxsd9: Split out transport mechanism
Split off a transport mechanism struct that will deal with the SPI
traffic in preparation for adding I2C support.

Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-18 10:49:46 +01:00
Greg Kroah-Hartman
552edf8d79 Second set of iio new device support, features and cleanups for the 4.9 cycle.
New device support
 * ad8801 dac
   - new driver supporting ad8801 and ad8803 DACs.
 * adc12138
   - new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
 * ltc2485 adc
   - new driver
 * mxc6255
   - add support for the mxc6225 part name and fixup the ID check so it works.
 * vz89x VOC sensor
   - add support for the vz89te part which drops the voc_short channel and adds
     CRCs compared to other supported parts.
 
 New features
 * core
   - immutable triggers.  These effectively grant exclusive control over a
     trigger. The typical usecase is a device representing an analog part
     (perhaps a MUX) that needs to control the sampling of a downstream
     ADC.
   - resource managed trigger registration and triggered_buffer_init.
   - iio_push_event now protected against case of the event interface
     registration not having yet occured.  Only matters if an interrupt
     can occur during this window - might happen on shared interrupt lines.
   - helper to let a driver query if the trigger it is using is provided by
     itself (using the convention of both device and trigger having the same
     parent).
 * tools
   - iio-utils. Used channel modifier scaling in preference to generic scaling
     when both exist.
 * at91-adc
   - Add support for touchscreen switches closure time needed by some newer
     parts.
 * stx104
   - support the ADC channels on this ADC/DAC board. As these are the primary
     feature of the board also move the driver to the iio/adc directory.
 * sx9500
   - device tree bindings.
 
 Cleanups / Fixes
 * ad5755
   - fix an off-by-one on devnr limit check (introduced earlier this cycle)
 * ad7266
   - drop NULL check on devm_regulator_get_optional as it can't return NULL.
 * ak8974
   - avoid an unused functional warning due to rework in PM core code.
   - remove .owner field setting as done by i2c_core.
 * ina2xx
   - clear out a left over debug field from chip global data.
 * hid-sensors
   - avoid an unused functional warning due to rework in PM core code.
 * maxim-thermocouple
   - fix non static symbol warnings.
 * ms5611
   - fetch and enable regulators unconditionally when they aren't optional.
 * sca3000
   - whitespace cleanup.
 * st_sensors
   - fetch and enable regulators unconditionally rather than having them
     supported as optional regulators (missunderstanding on my part amongst
     others a while back)
   - followup to previous patch fixes error checking on the regulators.
   - mark symbols static where possible.
   - use the 'is it my trigger' help function.  This prevents the odd case
     of another device triggering from the st-sensors trigger whilst the
     st-sensors trigger is itself not using it but rather using say an hrtimer.
 * ti-ads1015
   - add missing of_node_put.
 * vz89x
   - rework to all support of new devices.
   - prevent reading of a corrupted buffer.
   - fixup a return value of 0/1 in a bool returning function.
 
 Address updates
 - Vlad Dogaru email address change.
 -----BEGIN PGP SIGNATURE-----
 
 iQIuBAABCAAYBQJX1wW9ERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaII9UP
 /jXkXtaL62pvipMuEujmpR7j/A+GhmSWHhnbJ9XXeGZStGMUummTyaM+6WZoCKUH
 bMtZh/ETsn+FI7mD7P/FtwHauoxSmndcaAfB6cDKQMVakbXbz4VHrim256cY3gvq
 dzF5nYX+wDue6D7k55VPrtV1isBfipeCXKBtzBlAXaVE2FK2qKP+PIlAln8Ql5/l
 b5B3pvqu0YVED4t2MzyVWcVidPOEh9GgwHu7Ba+kjVi6zuB4w+r5ZreIObb5IR54
 FDcEwL6vV9AlmX15Pc18NO+50bZ8TvgT4y7ISqaOwszaIEoDAc0hXT7TdUOscmtt
 LIbhzHVMVkPSjxvtpz2ui8GfqzhxLi3ZzfNHRegOqH4b2Cpoh4zdwn7nCyJEHZV5
 simAL00FGjzp6B4Zp+Ly6ygKzpF3iXZce0Qjlr/ge+ioNIrfuK10sdLw8NZA5GUB
 JcFYijcFLUb0Cu/KjZ7njlfdAN9Tt94xzpnllM8+j4M50Nhbw05YNhIxB7RxmeSH
 Y44/oBLG51SgtlIg5Z4rULRAcOC5dty73Inb0n4lbN/pjgIcnh+EYtPeI2fA8vyB
 XYqr4xx+A3ZX1yKpYLYO+JYtVsVq9RGYdb501uBhEE3/GWEpxZvbyqHnPwwfM+Pf
 ZNuBceBxM3yyi4Z/lKkZnQbaF/1fFoG7FO1n6iRpb8Ci
 =V1xL
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.9b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of iio new device support, features and cleanups for the 4.9 cycle.

New device support
* ad8801 dac
  - new driver supporting ad8801 and ad8803 DACs.
* adc12138
  - new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
* ltc2485 adc
  - new driver
* mxc6255
  - add support for the mxc6225 part name and fixup the ID check so it works.
* vz89x VOC sensor
  - add support for the vz89te part which drops the voc_short channel and adds
    CRCs compared to other supported parts.

New features
* core
  - immutable triggers.  These effectively grant exclusive control over a
    trigger. The typical usecase is a device representing an analog part
    (perhaps a MUX) that needs to control the sampling of a downstream
    ADC.
  - resource managed trigger registration and triggered_buffer_init.
  - iio_push_event now protected against case of the event interface
    registration not having yet occured.  Only matters if an interrupt
    can occur during this window - might happen on shared interrupt lines.
  - helper to let a driver query if the trigger it is using is provided by
    itself (using the convention of both device and trigger having the same
    parent).
* tools
  - iio-utils. Used channel modifier scaling in preference to generic scaling
    when both exist.
* at91-adc
  - Add support for touchscreen switches closure time needed by some newer
    parts.
* stx104
  - support the ADC channels on this ADC/DAC board. As these are the primary
    feature of the board also move the driver to the iio/adc directory.
* sx9500
  - device tree bindings.

Cleanups / Fixes
* ad5755
  - fix an off-by-one on devnr limit check (introduced earlier this cycle)
* ad7266
  - drop NULL check on devm_regulator_get_optional as it can't return NULL.
* ak8974
  - avoid an unused functional warning due to rework in PM core code.
  - remove .owner field setting as done by i2c_core.
* ina2xx
  - clear out a left over debug field from chip global data.
* hid-sensors
  - avoid an unused functional warning due to rework in PM core code.
* maxim-thermocouple
  - fix non static symbol warnings.
* ms5611
  - fetch and enable regulators unconditionally when they aren't optional.
* sca3000
  - whitespace cleanup.
* st_sensors
  - fetch and enable regulators unconditionally rather than having them
    supported as optional regulators (missunderstanding on my part amongst
    others a while back)
  - followup to previous patch fixes error checking on the regulators.
  - mark symbols static where possible.
  - use the 'is it my trigger' help function.  This prevents the odd case
    of another device triggering from the st-sensors trigger whilst the
    st-sensors trigger is itself not using it but rather using say an hrtimer.
* ti-ads1015
  - add missing of_node_put.
* vz89x
  - rework to all support of new devices.
  - prevent reading of a corrupted buffer.
  - fixup a return value of 0/1 in a bool returning function.

Address updates
- Vlad Dogaru email address change.
2016-09-14 20:42:03 +02:00
Hans de Goede
1696566f99 iio: accel: mxc6255: Fix chip-id check
The initial commit adding support for the mxc6225 assumed the
mxc6225 has a chip-id of 0xe5 based on testing on a single Allwinner
A23 tablet with a mxc6225. Testing on a bunch of other Allwinner
tablets have shown that the chip-id for the mxc6225 is not constant.

A datasheet for the MXC6255 which I've found online says that bits
7 and 6 of the chip-id register are undefined (for the mxc6255), testing
on 5 different tablets with a mxc6225 has found the following ids:
0x25, 0x45, 0x65, 0x85, 0xe5. So it seems that for the mxc6225 bits
7, 6 and 5 of the chip-id register are undefined.

This commit adjusts the chip-id check so that the mxc6255 driver
properly recognizes the mxc6225 in all these tablets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-12 20:19:16 +01:00
Greg Kroah-Hartman
8473054e4d Merge 4.8-rc6 into staging-next
We need the IIO changes in here for future patches to build on.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-12 09:18:04 +02:00
Linus Walleij
7ba4b884b7 iio: st_sensors: use the helper function
The ST sensors can be used as a trigger for its own triggered buffer
but it is also possible to use an external trigger: a HRTimer or
even a different sensor (!) as trigger. In that case we should not
pick the timestamp from our own interrupt top half even if it is
active.

This could practically happen if some other sensor is using the
ST sensor as trigger but the ST sensor itself is using e.g.
an HRTimer as trigger. So the trigger is on, but not used by us.

We used to assume that whenever the hardware interrupt is turned
on, we are using it for our own trigger, but this is an
oversimplification.

Handle this logically by using the iio_trigger_using_own() helper.

Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Crestez Dan Leonard <leonard.crestez@intel.com>
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-10 16:49:25 +01:00
Linus Walleij
702a7b8e06 iio: trigger: helpers to determine own trigger
This adds a helper function to the IIO trigger framework:

iio_trigger_using_own(): for an IIO device, this tells
  whether the device is using itself as a trigger.
  This is true if the indio device:
  (A) supplies a trigger and
  (B) has assigned its own buffer poll function to use this
      trigger.

This helper function is good when constructing triggered,
buffered drivers that can either use its own hardware *OR*
an external trigger such as a HRTimer or even the trigger from
a totally different sensor.

Under such circumstances it is important to know for example
if the timestamp from the same trigger hardware should be used
when populating the buffer: if iio_trigger_using_own() is true,
we can use this timestamp, else we need to pick a unique
timestamp directly in the trigger handler.

For this to work of course IIO devices registering hardware
triggers must follow the convention to set the parent device
properly, as as well as setting the parent of the IIO device
itself.

When a new poll function is attached, we check if the parent
device of the IIO of the poll function is the same as the
parent device of the trigger and in that case we conclude that
the hardware is using itself as trigger.

Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Crestez Dan Leonard <leonard.crestez@intel.com>
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-10 16:49:14 +01:00
Lars-Peter Clausen
4b1a9380a6 iio: iio_push_event(): Don't crash if the event interface is not registered
iio_push_event() operates on a struct iio_dev. This struct can be allocated
using iio_device_alloc() which returns a valid struct iio_dev pointer. But
iio_push_event() is not safe to use on such a iio_dev until
iio_device_register() for the same device has successfully completed.

This restriction is not documented anywhere and most drivers are written
with the assumption that this restriction does not exist. The basic pattern
that is followed by all drivers looks like the following:

	irqreturn_t event_callback(int irq, void *devid)
	{
		struct iio_dev *indio_dev = devid;
		...
		iio_push_event(indio_dev, ...);

		return IRQ_HANDLED;
	}

	int driver_probe(struct device *dev)
	{
		struct iio_dev *indio_dev;

		indio_dev = iio_device_alloc(...);

		request_irq(event_irq, event_callback, ..., indio_dev);

		return iio_device_register(indio_dev);
	}

And while it is unlikely that the IRQ fires before iio_device_register()
completes (e.g. because the IRQ is disabled in the device) it is not
impossible and might be triggered by glitches on the signal line or
incorrect hardware configuration.

To avoid undefined behaviour in such a case extend iio_push_event() to
check if the event has been registered and discard generated events if it
has not.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-10 16:40:44 +01:00
Greg Kroah-Hartman
72d508ad48 Second set of IIO fixes for the 4.8 cycle.
We have a big rework of the kxsd9 driver queued up behind the fix below and
 a fix for a recent fix that was marked for stable.
 Hence this fix series is perhaps a little more urgent than average for IIO.
 * core
   - a fix for a fix in the last set.  The recent fix for blocking ops when
    ! task running left a path (unlikely one) in which the function return
    value was not set - so initialise it to 0.
   - The IIO_TYPE_FRACTIONAL code previously didn't cope with negative
   fractions.  Turned out a fix for this was in Analog's tree but hadn't made
   it upstream.
 * bmc150
   - reset chip at init time. At least one board out there ends up coming up
   in an unstable state due to noise during power up.  The reset does no
   harm on other boards.
 * kxsd9
   - Fix a bug in the reported scaling due to failing to set the integer
   part to 0.
 * hid-sensors-pressure
   - Output was in the wrong units to comply with the IIO ABI.
 * tools
   - iio_generic_buffer: Fix the trigger-less mode by ensuring we don't fault
     out for having no trigger when we explicitly said we didn't want to have
     one.
 -----BEGIN PGP SIGNATURE-----
 
 iQIuBAABCAAYBQJX0GOMERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaI2rwQ
 AIA4M6uKqsdLLdmjT3bB1mGuXedGzwrvSObEvTGKEi/LDFreKsnqmjAlltuo7kwl
 RxBXOOwb9Is3HccGEsFFWBNaMEKaW0ZoH9n0dn7VdlGThloKxE57S386GUGKT0Xq
 tKNHbw7ITO+UIC1CvavmFsNk5Qe7AMiSNTnlBizcVrfdtbX91aqRe4X3fP8X1kFv
 zcE/sbip9tjKwrXTsZ5/D4FCAtKjkamouv3tZHsp/qwhUQ9AJwklw0pySVgi+Ou1
 3xzFwVATrH5bMK0JGwKts7zaMRvrbaf4CRdHhSLUXqmSYCYiN7THFnb/xD1nbFAy
 AMsHDeXDs30cQD+Wiks9oNqf37EkcMBEsYpoFvoFE3xcVdX6NTs9ZRpGe+xizB1u
 yI+Howt9sb4CcdPBtpPb3ffKK9X2ccPT+q1J8OpNlwZH/yta4wogFt8eKZlvdPtc
 pHstwHUvv+s5EXYI8266DIkd9ErRI2+13v08rBwex1C8S0Xt5qQFOe/k7a5wzn2O
 /DNUQ/mfOXJinxbt1aBakn2PFoMjyNWEXua7haW3pbr+fpUsZTN/MT57p2W3E4Ak
 PfZxvHARW0MY3ShKpRmwzhrzmddGWZYb07xOtcoktHt2esV9MLUQLCUlDPaLk2H5
 gUzvzEDQQJpyj+SmxAyEejeoZWMWIIW4dfoxBCU1iSF+
 =Ob6a
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second set of IIO fixes for the 4.8 cycle.

We have a big rework of the kxsd9 driver queued up behind the fix below and
a fix for a recent fix that was marked for stable.
Hence this fix series is perhaps a little more urgent than average for IIO.
* core
  - a fix for a fix in the last set.  The recent fix for blocking ops when
   ! task running left a path (unlikely one) in which the function return
   value was not set - so initialise it to 0.
  - The IIO_TYPE_FRACTIONAL code previously didn't cope with negative
  fractions.  Turned out a fix for this was in Analog's tree but hadn't made
  it upstream.
* bmc150
  - reset chip at init time. At least one board out there ends up coming up
  in an unstable state due to noise during power up.  The reset does no
  harm on other boards.
* kxsd9
  - Fix a bug in the reported scaling due to failing to set the integer
  part to 0.
* hid-sensors-pressure
  - Output was in the wrong units to comply with the IIO ABI.
* tools
  - iio_generic_buffer: Fix the trigger-less mode by ensuring we don't fault
    out for having no trigger when we explicitly said we didn't want to have
    one.
2016-09-09 13:44:37 +02:00
Gregor Boirie
171c009183 iio:core: fix IIO_VAL_FRACTIONAL sign handling
7985e7c100 ("iio: Introduce a new fractional value type") introduced a
new IIO_VAL_FRACTIONAL value type meant to represent rational type numbers
expressed by a numerator and denominator combination.

Formating of IIO_VAL_FRACTIONAL values relies upon do_div() usage. This
fails handling negative values properly since parameters are reevaluated
as unsigned values.
Fix this by using div_s64_rem() instead. Computed integer part will carry
properly signed value. Formatted fractional part will always be positive.

Fixes: 7985e7c100 ("iio: Introduce a new fractional value type")
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-05 21:21:32 +01:00
Hans de Goede
06777c562a iio: accel: mxc6255 add support for the mxc6225
The mxc6225 is fully compatible with the existing mxc6255 driver,
add support for it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-05 21:18:16 +01:00
Nicolas Ferre
ede63aaf7c iio: adc: at91: Add support for Touchscreen Switches Closure Time
On newer components compatible with the at91sam9x5, the Touchscreen
Switches Closure Time or TSSCTIM value of the Touchscreen Mode Register is
not filled at all.
On some hardware, having no time indicated for it may lead to incoherent
values and jitter.
We fix this time to 10us as it is usually difficult to retrieve impedance
values from LCD manufacturers.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-05 21:11:21 +01:00
Crt Mori
fbe84bd480 iio: devm_regulator_get_optional never returns NULL
This patch is inspired by a comment of Jonathan Cameron on patch of
Linus Walleij commit aeb55fff38 ("iio:
st_sensors: fetch and enable regulators unconditionally"). Because
changes made in this patch are actually reference generators they should
be using devm_regulator_get_optional, but if they do not explicitly set
the reference to NULL they should not be using IS_ERR_OR_NULL, but
simple IS_ERR check.

Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-05 21:09:38 +01:00
Crt Mori
6751607488 iio: fetch and enable regulators unconditionally
This patch is inspired by a comment of Jonathan Cameron on patch of
Linus Walleij commit aeb55fff38 ("iio: st_sensors: fetch and enable regulators unconditionally").

The explanation for this change is same as in that patch:
"Supplies are *not* optional (optional means that the supply is
optional in the electrical sense, not the software sense) so we need to
get the and enable them at all times.

If the device tree or board file does not define suitable regulators for
the component, it will be substituted by a dummy regulator, or, if
regulators are disabled altogether, by stubs. There is no need to use the
IS_ERR_OR_NULL() check that is considered harmful.

Reported-by: Linus Wallerij <linus.walleij@linaro.org>
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Crt Mori <cmo@melexis.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-05 21:08:40 +01:00
Colin Ian King
5dba4b14ba iio: ensure ret is initialized to zero before entering do loop
A recent fix to iio_buffer_read_first_n_outer removed ret from being set by
a return from wait_event_interruptible and also added a continue in a loop
which causes the variable ret to not be set when it reaches the end of the
loop.  Fix this by initializing ret to zero.

Also remove extraneous white space at the end of the loop.

Fixes: fcf68f3c0b ("fix sched WARNING "do not call blocking ops when !TASK_RUNNING")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-05 21:00:14 +01:00
Greg Kroah-Hartman
9c2edd8b5b Merge 4.8-rc5 into staging-next
We want the staging fixes in here as well to handle merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-05 08:13:24 +02:00
Greg Kroah-Hartman
fbc1ec2efe Merge 4.8-rc5 into char-misc-next
We want the fixes in here for merging and testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-05 08:04:07 +02:00
Gregor Boirie
70e483487d iio: add resource managed triggered buffer init helpers
Add resource managed devm_iio_triggered_buffer_setup() and
devm_iio_triggered_buffer_cleanup() to automatically clean up triggered
buffers setup by IIO drivers, thus leading to simplified IIO drivers code.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-04 15:42:46 +01:00
Gregor Boirie
9083325f11 iio:trigger: add resource managed (un)register
Add resource managed devm_iio_trigger_register() and
devm_iio_triger_unregister() to automatically clean up registered triggers
allocated by IIO drivers, thus leading to simplified IIO drivers code.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-04 15:42:37 +01:00
Linus Torvalds
593ee4edc5 Char/Misc driver fixes for 4.8-rc5
Here are a number of small driver fixes for 4.8-rc5.
 
 The largest thing here is deleting an obsolete driver,
 drivers/misc/bh1780gli.c, as the functionality of it was replaced by an
 iio driver a while ago.  The other fixes are things that have been
 reported, or reverts of broken stuff (the binder change).  All of these
 changes have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFYEABECABYFAlfK3/MPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspm5MAoLb+
 VGesoc7cGbFN0EIskollZRzBAJ9Wnhvu3rVeDQYCA0t9+uRg0CcpWw==
 =Wt/v
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a number of small driver fixes for 4.8-rc5.

  The largest thing here is deleting an obsolete driver,
  drivers/misc/bh1780gli.c, as the functionality of it was replaced by
  an iio driver a while ago.

  The other fixes are things that have been reported, or reverts of
  broken stuff (the binder change).  All of these changes have been in
  linux-next for a while with no reported issues"

* tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  thunderbolt: Don't declare Falcon Ridge unsupported
  thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller.
  thunderbolt: Fix resume quirk for Falcon Ridge 4C.
  lkdtm: Mark lkdtm_rodata_do_nothing() notrace
  mei: me: disable driver on SPT SPS firmware
  Revert "android: binder: fix dangling pointer comparison"
  drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup
  android: binder: fix dangling pointer comparison
  misc: delete bh1780 driver
2016-09-03 11:38:43 -07:00
Linus Walleij
307fe9dd11 iio: accel: kxsd9: Fix scaling bug
All the scaling of the KXSD9 involves multiplication with a
fraction number < 1.

However the scaling value returned from IIO_INFO_SCALE was
unpredictable as only the micros of the value was assigned, and
not the integer part, resulting in scaling like this:

$cat in_accel_scale
-1057462640.011978

Fix this by assigning zero to the integer part.

Cc: stable@vger.kernel.org
Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03 18:30:45 +01:00
kbuild test robot
2535cc7ae0 iio: chemical: vz89x: fix boolreturn.cocci warnings
drivers/iio/chemical/vz89x.c:119:9-10: WARNING: return of 0/1 in function 'vz89x_measurement_is_valid' with return type bool

 Return statements in functions returning bool should use
 true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci

CC: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03 17:49:53 +01:00
Olof Johansson
1c50084093 iio: accel: bmc150: reset chip at init time
In at least one known setup, the chip comes up in a state where reading
the chip ID returns garbage unless it's been reset, due to noise on the
wires during system boot.

All supported chips have the same reset method, and based on the
datasheets they all need 1.3 or 1.8ms to recover after reset. So, do
the conservative thing here and always reset the chip.

Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03 17:26:14 +01:00
Linus Walleij
1b246fca4a iio: st_sensors: fix errorcheck for regulators
We were checking the return code of vdd when we should be checking
vdd_io. My mistake, mea culpa.

Cc: Giuseppe BARBA <giuseppe.barba@st.com>
Reported-by: Giuseppe BARBA <giuseppe.barba@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03 17:25:54 +01:00
William Breathitt Gray
4075a283ae iio: stx104: Add IIO support for the ADC channels
The Apex Embedded Systems STX104 features 16 channels of single-ended (8
channels of true differential) 16-bit analog input. Differential input
configuration may be selected via a physical jumper on the device.
Similarly, input polarity (unipolar/bipolar) is configured via a
physical jumper on the device.

Input gain selection is available to the user via software, thus
allowing eight possible input ranges: +-10V, +-5V, +-2.5V, +-1.25V,
0 to 10V, 0 to 5V, 0 to 2.5V, and 0 to 1.25V. Four input gain
configurations are supported: x1, x2, x4, and x8.

This ADC resolution is 16-bits (1/65536 of full scale). Analog input
samples are taken on software trigger; neither FIFO sampling nor
interrupt triggering is supported by this driver.

The Apex Embedded Systems STX104 is primarily an analog-to-digital
converter device. The STX104 IIO driver was initially placed in the DAC
directory because only the DAC portion of the STX104 was supported at
the time. Now that ADC support has been added to the STX104 IIO driver,
the driver should be moved to the more appropriate ADC directory.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03 17:25:53 +01:00
Kweh, Hock Leong
36afb176d3 iio: fix pressure data output unit in hid-sensor-attributes
According to IIO ABI definition, IIO_PRESSURE data output unit is
kilopascal:
http://lxr.free-electrons.com/source/Documentation/ABI/testing/sysfs-bus-iio

This patch fix output unit of HID pressure sensor IIO driver from pascal to
kilopascal to follow IIO ABI definition.

Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03 17:09:58 +01:00
Alison Schofield
c060991912 iio: adc: ina2xx: remove unused debug field from chip global data
commit 1961bce764 "iio: ina2xx: Remove trace_printk debug
statements" removed the code that used the chip->prev_ns field.
This patch cleans it up further by removing the unused field
and assignments.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03 16:00:51 +01:00
Matt Ranostay
c8cdf70890 iio: trigger: allow immutable triggers to be assigned
There are times when an assigned trigger to a device shouldn't ever
change after intialization.

Examples of this being used is when an provider device has a trigger
that is assigned to an ADC, which uses it populate data into a callback
buffer.

Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03 15:31:55 +01:00
Christoph Fritz
a5c8b11a36 iio: sx9500: add final devicetree support
This makes sx9500 driver usable on devicetree based platforms too.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Vlad Dogaru <ddvlad@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03 15:26:28 +01:00