Commit Graph

55 Commits

Author SHA1 Message Date
Andrzej Pietrasiewicz
bbcf90c064 thermal: Explicitly enable non-changing thermal zone devices
Some thermal zone devices never change their state, so they should be
always enabled.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629122925.21729-9-andrzej.p@collabora.com
2020-06-29 20:26:37 +02:00
Akinobu Mita
b741ffb4bf thermal: armada: remove unused TO_MCELSIUS macro
This removes unused TO_MCELSIUS() macro.

Link: http://lkml.kernel.org/r/1576386975-7941-12-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 10:30:40 -08:00
Zak Hays
ff6628951c thermal: armada: Clear reset in armadaxp_init
The reset bit needs to be cleared in the init sequence otherwise it
holds the block in reset.

Signed-off-by: Zachary Hays <zhays@lexmark.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/BN8PR10MB33797EECAC557B5018A0A6628C580@BN8PR10MB3379.namprd10.prod.outlook.com
2020-01-27 10:24:32 +01:00
Zak Hays
4abb629bea thermal: armada: Fix register offsets for AXP
As shown in its device tree, Armada XP has the control1 register at
0x184d0, not 0x182d0.

Signed-off-by: Zachary Hays <zhays@lexmark.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/BN8PR10MB337990B7688320D736760BB68C580@BN8PR10MB3379.namprd10.prod.outlook.com
2020-01-27 10:24:32 +01:00
Nathan Huckleberry
9aee371313 thermal: armada: Fix -Wshift-negative-value
Clang produces the following warning

drivers/thermal/armada_thermal.c:270:33: warning: shifting a negative
signed value is undefined [-Wshift-negative-value]
1 warning        reg &= ~CONTROL1_TSEN_AVG_MASK <<
CONTROL1_TSEN_AVG_SHIFT; generated
.
               ~~~~~~~~~~~~~~~~~~~~~~~ ^

CONTROL1_TSEN_AVG_SHIFT is defined to be zero.
Since shifting by zero does nothing this variable can be removed.

Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/532
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-08-28 16:41:02 +08:00
Thomas Gleixner
9c92ab6191 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 285 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Linus Torvalds
c280230254 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal SoC updates from Eduardo Valentin:

 - Tegra DT binding documentation for Tegra194

 - Armada now supports ap806 and cp110

 - RCAR thermal now supports R8A774C0 and R8A77990

 - Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom,
   Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers.

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits)
  thermal: generic-adc: Fix adc to temp interpolation
  thermal: rcar_thermal: add R8A77990 support
  dt-bindings: thermal: rcar-thermal: add R8A77990 support
  thermal: rcar_thermal: add R8A774C0 support
  dt-bindings: thermal: rcar-thermal: add R8A774C0 support
  dt-bindings: cp110: document the thermal interrupt capabilities
  dt-bindings: ap806: document the thermal interrupt capabilities
  MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver
  thermal: armada: add overheat interrupt support
  thermal: st: fix Makefile typo
  thermal: uniphier: Convert to SPDX identifier
  thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro
  thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro
  dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
  thermal: imx: save one condition block for normal case of nvmem initialization
  thermal: imx: fix for dependency on cpu-freq
  thermal: tsens: qcom: do not create duplicate regmap debugfs entries
  thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy()
  dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts
  thermal: broadcom: use devm_thermal_zone_of_sensor_register
  ...
2019-01-05 16:01:16 -08:00
Miquel Raynal
879d7362d1 thermal: armada: add overheat interrupt support
The IP can manage to trigger interrupts on overheat situation from all
the sensors.

However, the interrupt source changes along with the last selected
source (ie. the last read sensor), which is an inconsistent behavior.
Avoid possible glitches by always selecting back only one channel which
will then be referenced as the "overheat_sensor" (arbitrarily: the first
in the DT which has a critical trip point filled in).

It is possible that the scan of all thermal zone nodes did not bring a
critical trip point from which the overheat interrupt could be
configured. In this case just complain but do not fail the probe.

Also disable sensor switch during overheat situations because changing
the channel while the system is too hot could clear the overheat state
by changing the source while the temperature is still very high.

Even if the overheat state is not declared, overheat interrupt must be
cleared by reading the DFX interrupt cause _after_ the temperature has
fallen down to the low threshold, otherwise future possible interrupts
would not be served. A work polls the corresponding register until the
overheat flag gets cleared in this case.

Suggested-by: David Sniatkiwicz <davidsn@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02 04:47:17 -08:00
YueHaibing
ac31f6e25d thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy()
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02 04:47:10 -08:00
Julia Lawall
13cfb713c8 thermal: armada: constify thermal_zone_of_device_ops structure
The thermal_zone_of_device_ops structure can be const as it is only
passed as the last argument of devm_thermal_zone_of_sensor_register
and the corresponding parameter is declared as const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-05 06:47:02 -08:00
Russell King
dc6946cbef thermal: armada: fix legacy resource fixup
When the armada thermal module is inserted, removed and then reinserted,
the system panics as per the messages below.  The reason is that "edit"
a live resource in the resource tree twice, and end up with it pointing
to some other hardware.

Editing live resources (resources that are part of the registered
resource tree) is not permissible - the resource tree is an ordered
set of resources, sorted by start address, and when a new resource is
inserted, it is validated that it (a) fits within its parent resource
and (b) does not overlap a neighbouring resource.

Get rid of this resource editing.  We can instead adjust the return
value from ioremap() as ioremap() deals with the creation of page-
based mappings - provided the adjustment does not cross a page
boundary.

SError Interrupt on CPU1, code 0xbf000000 -- SError
CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175
Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT)
pstate: 20400085 (nzCv daIf +PAN -UAO)
pc : regmap_mmio_read+0x3c/0x60
lr : regmap_mmio_read+0x3c/0x60
sp : ffffff800d453900
x29: ffffff800d453900 x28: ffffff800096a1d0
x27: 0000000000000100 x26: ffffff80009696d8
x25: ffffff8000969000 x24: ffffffc13a588918
x23: ffffffc13a9a28a8 x22: ffffff800d4539dc
x21: 0000000000000084 x20: ffffff800d4539dc
x19: ffffffc13a5d5480 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000030
x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
x9 : 0000000000000000 x8 : ffffffc13a5d5a80
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000000 x4 : 0000000000000000
x3 : ffffff800851be70 x2 : ffffff800851bd60
x1 : ffffff800d492ff8 x0 : 0000000000000000
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175
Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT)
Call trace:
 dump_backtrace+0x0/0x158
 show_stack+0x14/0x1c
 dump_stack+0x90/0xb0
 panic+0x128/0x298
 print_tainted+0x0/0xa8
 arm64_serror_panic+0x74/0x80
 do_serror+0x5c/0xb8
 el1_error+0xb4/0x144
 regmap_mmio_read+0x3c/0x60
 _regmap_bus_reg_read+0x18/0x20
 _regmap_read+0x64/0x180
 regmap_read+0x44/0x6c
 armada_ap806_init+0x24/0x5c [armada_thermal]
 armada_thermal_probe+0x2c8/0x37c [armada_thermal]
 platform_drv_probe+0x4c/0xb0
 really_probe+0x21c/0x2b4
 driver_probe_device+0x58/0xfc
 __driver_attach+0xd4/0xd8
 bus_for_each_dev+0x50/0xa0
 driver_attach+0x20/0x28
 bus_add_driver+0x1c4/0x228
 driver_register+0x6c/0x124
 __platform_driver_register+0x4c/0x54
 armada_thermal_driver_init+0x20/0x1000 [armada_thermal]
 do_one_initcall+0x30/0x204
 do_init_module+0x5c/0x1d4
 load_module+0x1a88/0x212c
 __se_sys_finit_module+0xa0/0xac
 __arm64_sys_finit_module+0x1c/0x24
 el0_svc_common+0x94/0xf0
 el0_svc_handler+0x24/0x80
 el0_svc+0x8/0x3c0
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0,21806000
Memory Limit: none

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04 21:24:53 -08:00
Russell King
70bb27b79a thermal: armada: fix legacy validity test sense
Commit 8c0e64ac40 ("thermal: armada: get rid of the ->is_valid()
pointer") removed the unnecessary indirection through a function
pointer, but in doing so, also removed the negation operator too:

-       if (priv->data->is_valid && !priv->data->is_valid(priv)) {
+       if (armada_is_valid(priv)) {

which results in:

armada_thermal f06f808c.thermal: Temperature sensor reading not valid
armada_thermal f2400078.thermal: Temperature sensor reading not valid
armada_thermal f4400078.thermal: Temperature sensor reading not valid

at boot, or whenever the "temp" sysfs file is read.  Replace the
negation operator.

Fixes: 8c0e64ac40 ("thermal: armada: get rid of the ->is_valid() pointer")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04 20:45:14 -08:00
Dan Carpenter
d1d2c290b3 thermal: armada: fix a test in probe()
The platform_get_resource() function doesn't return error pointers, it
returns NULL on error.

Fixes: 3d4e51844a ("thermal: armada: convert driver to syscon register accesses")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22 17:38:24 -07:00
Wei Yongjun
84b64de597 thermal: armada: fix copy-paste error in armada_thermal_probe()
The return value from devm_kzalloc() is not checked correctly. The
test is done against a wrong variable. Fix it.

Fixes: e72f03ef2543 ("thermal: armada: use the resource managed registration helper alternative")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-08-01 09:56:12 -07:00
Miquel Raynal
8c0e64ac40 thermal: armada: get rid of the ->is_valid() pointer
The implementation of armada_is_valid() is very simple and is the same
across all the versions of the IP since the ->is_valid_bit has been
introduced. Simplify the structure by getting rid of the function
pointer and calling directly the function.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:12 -07:00
Miquel Raynal
68b14828ca thermal: armada: move validity check out of the read function
Sensor selection when using multiple sensors already checks for the
sensor validity. Move it to the legacy ->get_temp() hook, where it is
still needed.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:11 -07:00
Miquel Raynal
00707e4c96 thermal: armada: remove sensors validity from the IP initialization
When using new bindings with multiple sensors, sensor validity is
checked twice because sensor selection also checks for the validity.

Remove the redundant call from the IP initialization helper and move it
to the legacy probe section where it is still needed.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:10 -07:00
Miquel Raynal
f7c2068a17 thermal: armada: add multi-channel sensors support
MVEBU thermal IP supports multiple channels. Each channel may have
several sensors but for now each channel is wired to only one thermal
sensor. The first channel always points to the so called internal
sensor, within the thermal IP. There is usually one more channel (with
one sensor each time) per CPU. The code has been written to support
possible evolutions of the ap806 IP that would embed more CPUs and thus
more channels to select. Each channel should be referenced in the device
tree as an independent thermal zone.

Add the possibility to read each of these sensors through sysfs by
registering all the sensors (translated in "thermal_zone"). Also add a
mutex on these accesses to avoid read conflicts (only one channel/sensor
may be selected and read at a time).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:09 -07:00
Miquel Raynal
c9899c1839 thermal: armada: use the resource managed registration helper alternative
Current use of thermal_zone_device_register() triggers a warning at boot
and should be replaced by devm_thermal_zone_of_sensor_register(). This
allows better handling of multiple thermal zones for later multi-sensors
support.

Also change the driver data to embed a new structure to make the
difference between legacy data (which needs to be cleaned) and
syscon-related data.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:08 -07:00
Miquel Raynal
3d4e51844a thermal: armada: convert driver to syscon register accesses
Until recently, only one register was referenced in MVEBU thermal IP
node. Recent changes added a second entry pointing to another
register right next to it. We cannot know for sure that we will not
have to access other registers. That will be actually the case when
overheat interrupt feature will come, where it will be needed to access
DFX registers in the same area.

This approach is not scalable so instead of adding consinuously memory
areas in the DT (and change the DT bindings, while keeping backward
compatibility), move the thermal node into a wider syscon from which it
will be possible to also configure the thermal interrupt.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:07 -07:00
Miquel Raynal
a9fae794e4 thermal: armada: average over samples to avoid glitches
Configure the sample frequency and number of averaged samples.

This is needed for two reasons:
1/ To be bootloader independent.
2/ To prepare the introduction of multi-sensors support by preventing
   inconsistencies when reading temperatures that could be a mean of
   samples took from different sensors.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:06 -07:00
Miquel Raynal
5b5e17a182 thermal: armada: dissociate a380 and cp110 ->init() hooks
Until now, Armada 380 and CP110 could share the same ->init() function
because their use was identical.

Prepare the support of multi-sensors support and overheat interrupt
feature by separating the initialization paths before they actually
diverge.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:06 -07:00
Miquel Raynal
8b4c2712cd thermal: armada: rename the initialization routine
Calling a hook ->init_sensor() while what is initialized is the IP
itself and not the sensors is misleading. Rename the hook ->init() to
avoid any confusion in later work bringing multi-sensors support.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:05 -07:00
Miquel Raynal
c5d7d57e68 thermal: armada: remove misleading comments
On older versions of this thermal IP, TSEN referred as the internal
sensor in the thermal IP while EXT_TSEN referred as sensors outside of
this IP, ie in the CPUs most of the time. The bit names in the
specifications do not follow this rule anymore, so remove these comments
that are misleading.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:04 -07:00
Miquel Raynal
931d3c5db4 thermal: armada: remove useless register accesses
Prepare the migration to use regmaps by first simplifying the
initialization functions: avoid unnecessary write/read cycles on
configuration registers.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:03 -07:00
Miquel Raynal
8d98761a6f thermal: armada: add a function that sanitizes the thermal zone name
Thermal zone names must follow certain rules imposed by the framework.
They are limited in length and shall not have any hyphen '-'.

This is done in a separate function for future use in another location.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27 14:43:02 -07:00
Miquel Raynal
f80ee03fe7 thermal: armada: Give meaningful names to the thermal zones
After registration to the thermal core, sysfs will make one entry
per instance of the driver in /sys/class/thermal_zoneX and
/sys/class/hwmon/hwmonX, X being the index of the instance, all of them
having the type/name "armada_thermal".

Until now there was only one thermal zone per SoC but SoCs like Armada
A7K and Armada A8K have respectively two and three thermal zones (one
per AP and one per CP) and this number is subject to grow in the future.

Use dev_name() instead of the "armada_thermal" string to get a
meaningful name and be able to identify the thermal zones from
userspace.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:27:21 -08:00
Miquel Raynal
64163681a2 thermal: armada: Wait sensors validity before exiting the init callback
The thermal core will check for sensors validity right after the
initialization callback has returned. As the initialization routine make
a reset, the sensors are not ready immediately and the core spawns an
error in the dmesg. Avoid this annoying situation by polling on the
validity bit before exiting from these routines. This also avoid the use
of blind sleeps.

Suggested-by: David Sniatkiwicz <davidsn@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:25:19 -08:00
Miquel Raynal
8c0b888f66 thermal: armada: Change sensors trim default value
Errata #132698 highlights an error in the default value of Tc trim.
Set this parameter to b'011.

Suggested-by: David Sniatkiwicz <davidsn@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:23:04 -08:00
Miquel Raynal
a9d58a1aa3 thermal: armada: Update Kconfig and module description
Update Armada thermal driver Kconfig entry as well as the driver's
MODULE_DESCRIPTION content, now that 64-bit SoCs are also supported,
eg. Armada 7K and Armada 8K.

Use the generic term "Marvell EBU Armada SoCs" instead of listing all
the supported SoCs everywhere (excepted in the Kconfig description,
where it is useful to have a list).

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:21:48 -08:00
Baruch Siach
ccf8f522d1 thermal: armada: Add support for Armada CP110
The CP110 component is integrated in the Armada 8k and 7k lines of
processors.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[<miquel.raynal@free-electrons.com>: renamed the register pointers as
well as some definitions related to the new register names and
simplified the init sequence for Armada 380]
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:20:40 -08:00
Baruch Siach
2ff1279992 thermal: armada: Add support for Armada AP806
The AP806 component is integrated in the Armada 8K and 7K lines of
processors.

The thermal sensor sample field on the status register is a signed
value. Extend armada_get_temp() and the driver structure to handle
signed values.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[<miquel.raynal@free-electrons.com>: Changes when applying over the
previous patches, including the register names changes, also switched
the coefficients values to s64 instead of unsigned long to deal with
negative values and used do_div instead of the traditionnal '/']
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:18:06 -08:00
Miquel Raynal
8371b8a332 thermal: armada: Use real status register name
Three 32-bit registers are used to drive the thermal IP: control0,
control1 and status. The two control registers share the same name both
in the documentation and in the code, while the latter is referred as
"sensor" in the code. Rename this pointer to be called "status" in order
to be aligned with the documentation.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:17:18 -08:00
Miquel Raynal
2f28e4c24b thermal: armada: Clarify control registers accesses
Bindings were incomplete for a long time by only exposing one of the two
available control registers. To ease the migration to the full bindings
(already in use for the Armada 375 SoC), rename the pointers for
clarification. This way, it will only be needed to add another pointer
to access the other control register when the time comes.

This avoids dangerous situations where the offset 0 of the control
area can be either one register or the other depending on the bindings
used. After this change, device trees of other SoCs could be migrated to
the "full" bindings if they may benefit from features from the
unaccessible register, without any change in the driver.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:16:29 -08:00
Miquel Raynal
27d92f27ae thermal: armada: Simplify the check of the validity bit
All Armada SoCs use one bit to declare if the sensor values are valid.
This bit moves across the versions of the IP.

The method until then was to do both a shift and compare with an useless
flag of "0x1". It is clearer and quicker to directly save the value that
must be ANDed instead of the bit position and do a single bitwise AND
operation.

Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 13:15:41 -08:00
Baruch Siach
7f3be017a8 thermal: armada: Use msleep for long delays
Use msleep for long (> 10ms) delays, instead of the busy waiting mdelay.
All delays are called from the probe routine, where scheduling is
allowed.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01 12:56:11 -08:00
Baruch Siach
0cf3a1ac3e thermal: armada: fix formula documentation comment
The formula implementation at armada_get_temp() indicates that the sign
in the formula is inverted.

Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-10-31 19:32:13 -07:00
Nadav Haklai
b56100db5b thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula
Update the coefficients so the calculation will not overrun the
unsigned long 32bits boundary

Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Victor Axelrod <victora@marvell.com>
Reviewed-by: Neta Zur Hershkovits <neta@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30 11:33:23 -07:00
Sascha Hauer
17e8351a77 thermal: consistently use int for temperatures
The thermal code uses int, long and unsigned long for temperatures
in different places.

Using an unsigned type limits the thermal framework to positive
temperatures without need. Also several drivers currently will report
temperatures near UINT_MAX for temperatures below 0°C. This will probably
immediately shut the machine down due to overtemperature if started below
0°C.

'long' is 64bit on several architectures. This is not needed since INT_MAX °mC
is above the melting point of all known materials.

Consistently use a plain 'int' for temperatures throughout the thermal code and
the drivers. This only changes the places in the drivers where the temperature
is passed around as pointer, when drivers internally use another type this is
not changed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Peter Feuerer <peter@piie.net>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Peter Feuerer <peter@piie.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-acpi@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: lm-sensors@lm-sensors.org
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-08-03 23:15:50 +08:00
Nadav Haklai
efa86858e1 thermal: armada: Update Armada 380 thermal sensor coefficients
Improve the Armada 380 thermal sensor accuracy by using updated formula.
The updated formula is:
Temperature[C degrees] = 0.4761 * tsen_vsen_out - 279.1

Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: <stable@vger.kernel.org> #v3.16
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-09 01:00:31 -07:00
Linus Torvalds
2efda9042d Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management update from Zhang Rui:
 "Summary:

   - of-thermal extension to allow drivers to register and use its
     functionality in a better way, without exploiting thermal core.
     From Lukasz Majewski.

   - Fix a bug in intel_soc_dts_thermal driver which calls a sleep
     function in interrupt handler.  From Maurice Petallo.

   - add a thermal UAPI header file for exporting the thermal generic
     netlink information to user-space.  From Florian Fainelli.

   - First round of refactoring in Exynos driver.  Bartlomiej and Lukasz
     are attempting to make it lean and easier to understand.

   - New thermal driver for Rockchip (rk3288), with support for DT
     thermal.  From Caesar Wang.

   - New thermal driver for Nvidia, Tegra124 SOCTHERM driver, with
     support for DT thermal.  From Mikko Perttunen.

   - New cooling device, based on common clock framework.  From Eduardo
     Valentin.

   - a couple of small fixes in thermal core framework.  From Srinivas
     Pandruvada, Javi Merino, Luis Henriques.

   - Dropping Armada A375-Z1 SoC thermal support as the chip is not in
     the market, armada folks decided to drop its support.

   - a couple of small fixes and cleanups in int340x thermal driver"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (58 commits)
  thermal: provide an UAPI header file
  Thermal/int340x: Clear the error value of the last acpi_bus_get_device() call
  thermal/powerclamp: add id for braswell cpu
  thermal: Intel SoC DTS: Don't do thermal zone update inside spin_lock
  Thermal: fix platform_no_drv_owner.cocci warnings
  Thermal/int340x: avoid unnecessary pointer casting
  thermal: int3403: Delete a check before thermal_zone_device_unregister()
  thermal/int3400: export uuids
  thermal: of: Extend current of-thermal.c code to allow setting emulated temp
  thermal: of: Extend of-thermal to export table of trip points
  thermal: of: Rename struct __thermal_trip to struct thermal_trip
  thermal: of: Extend of-thermal.c to provide check if trip point is valid
  thermal: of: Extend of-thermal.c to provide number of trip points
  thermal: Fix error path in thermal_init()
  thermal: lock the thermal zone when switching governors
  thermal: core: ignore invalid trip temperature
  thermal: armada: Remove support for A375-Z1 SoC
  thermal: rockchip: add driver for thermal
  dt-bindings: document Rockchip thermal
  thermal: exynos: remove exynos_tmu_data.h include
  ...
2014-12-17 10:16:27 -08:00
Ezequiel Garcia
e920f9b632 thermal: armada: Remove support for A375-Z1 SoC
The Armada 375 Z1 SoC revision is no longer supported. This commit
removes the quirk needed for the thermal sensor.

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-24 16:55:42 -04:00
Wolfram Sang
bbc3798340 thermal: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:42 +02:00
Ezequiel Garcia
e6e0a68c6c thermal: armada: Support Armada 380 SoC
Now that a generic infrastructure is in place, it's possible to support
the Armada 380 SoC thermal sensor. This sensor is similar to the one
available in the already supported SoCs, with its specific temperature formula
and specific sensor initialization.

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15 17:12:49 +08:00
Ezequiel Garcia
e2d5f05b74 thermal: armada: Support Armada 375 SoC
Now that a generic infrastructure is in place, it's possible to support
the new Armada 375 SoC thermal sensor. This sensor is similar to the one
available in the already supported SoCs, with its specific temperature formula
and specific sensor initialization.

In addition, we also add support for the Z1 SoC stepping, which needs
an initialization-quirk to work properly.

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15 17:12:49 +08:00
Ezequiel Garcia
fd2c94d5a3 thermal: armada: Allow to specify an 'inverted readout' sensor
In order to support inverted-formula thermal sensor readout, this commit
introduces an 'inverted' field in the SoC-specific structure which
allows to specify an inversion of the temperature formula.

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15 17:12:48 +08:00
Ezequiel Garcia
04bf3d7e5b thermal: armada: Pass the platform_device to init_sensor()
In order to perform SoC-specific quirks on platforms that need them,
this commit adds a new parameter to the init_sensor() function.
This will be used to support early silicons of the Armada 375 SoC,
to workaround some hardware issues.

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15 17:12:47 +08:00
Ezequiel Garcia
1fcacca40a thermal: armada: Add generic infrastructure to handle the sensor
In order to support similar SoC where the sensor value and valid
bit can have different shifts and/or mask, we add such fields to the
per-variant structure, instead of having the values hardcoded.

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15 17:12:46 +08:00
Ezequiel Garcia
9484bc62ca thermal: armada: Add infrastructure to support generic formulas
In order to support other similar SoC, with different sensor
coefficients, this commit adds the coeficients to the per-variant
structure, instead of having the formula hardcoded.

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15 17:12:34 +08:00
Ezequiel Garcia
66fdb7b635 thermal: armada: Rename armada_thermal_ops struct
As preparation work to add a generic infrastructure to support
different SoC variants, the armada_thermal_ops will be used
to host the SoC-specific fields, such as formula values and
register shifts.

For this reason, the name armada_thermal_ops is no longer suitable,
and this commit replaces it with armada_thermal_data.

Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-05-15 17:11:07 +08:00