The iterator, ITER_DISCARD, that can only be used in READ mode and
just discards any data copied to it, was added to allow a network
filesystem to discard any unwanted data sent by a server.
Convert cifs_discard_from_socket() to use this.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers seem to mistakenly report different values for
capabilities and share flags, so we can't always rely on those values
to decide whether the resolved target can handle any new DFS
referrals.
Add a new helper is_referral_server() to check if all resolved targets
can handle new DFS referrals by directly looking at the
GET_DFS_REFERRAL.ReferralHeaderFlags value as specified in MS-DFSC
2.2.4 RESP_GET_DFS_REFERRAL in addition to is_tcon_dfs().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
Handle the case where a resolved target share is like
//server/users/dir, and the user "foo" has no read permission to
access the parent folder "users" but has access to the final path
component "dir".
is_path_remote() already implements that, so call it directly.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
In do_dfs_failover(), the mount_get_conns() function requires the full
fs context in order to get new connection to server, so clone the
original context and change it accordingly when retrying the DFS
targets in the referral.
If failover was successful, then update original context with the new
UNC, prefix path and ip address.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
Skip DFS resolving when mounting with 'nodfs' even if
CONFIG_CIFS_DFS_UPCALL is enabled.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Passwords can contain ',' which are also used as the separator between
mount options. Mount.cifs will escape all ',' characters as the string ",,".
Update parsing of the mount options to detect ",," and treat it as a single
'c' character.
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Cc: stable@vger.kernel.org # 5.11
Reported-by: Simon Taylor <simon@simon-taylor.me.uk>
Tested-by: Simon Taylor <simon@simon-taylor.me.uk>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The new optional mount parameter "acregmax" allows a different
timeout for file metadata ("acdirmax" now allows controlling timeout
for directory metadata). Setting "actimeo" still works as before,
and changes timeout for both files and directories, but
specifying "acregmax" or "acdirmax" allows overriding the
default more granularly which can be a big performance benefit
on some workloads. "acregmax" is already used by NFS as a mount
parameter (albeit with a larger default and thus looser caching).
Suggested-by: Tom Talpey <tom@talpey.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The new optional mount parm, "acdirmax" allows caching the metadata
for a directory longer than file metadata, which can be very helpful
for performance. Convert cifs_inode_needs_reval to check acdirmax
for revalidating directory metadata.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
nfs and cifs on Linux currently have a mount parameter "actimeo" to control
metadata (attribute) caching but cifs does not have additional mount
parameters to allow distinguishing between caching directory metadata
(e.g. needed to revalidate paths) and that for files.
Add new mount parameter "acdirmax" to allow caching metadata for
directories more loosely than file data. NFS adjusts metadata
caching from acdirmin to acdirmax (and another two mount parms
for files) but to reduce complexity, it is safer to just introduce
the one mount parm to allow caching directories longer. The
defaults for acdirmax and actimeo (for cifs.ko) are conservative,
1 second (NFS defaults acdirmax to 60 seconds). For many workloads,
setting acdirmax to a higher value is safe and will improve
performance. This patch leaves unchanged the default values
for caching metadata for files and directories but gives the
user more flexibility in adjusting them safely for their workload
via the new mount parm.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Static code analysis reported a possible null pointer dereference
in my last commit:
cifs: Retain old ACEs when converting between mode bits and ACL.
This could happen if the DACL returned by the server is corrupted.
We were trying to continue by assuming that the file has empty DACL.
We should bail out with an error instead.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Trivial change to clarify code in smb2_is_network_name_deleted
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When server returns error STATUS_NETWORK_NAME_DELETED, TCON
must be marked for reconnect. So, subsequent IO does the tree
connect again.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With cifsacl, when a file/dir ownership is transferred (chown/chgrp),
the ACEs in the DACL for that file will need to replace the old owner
SIDs with the new owner SID.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When cifsacl mount option is used, retain the ACEs which
should not be modified during chmod. Following is the approach taken:
1. Retain all explicit (non-inherited) ACEs, unless the SID is one
of owner/group/everyone/authenticated-users. We're going to set new
ACEs for these SIDs anyways.
2. At the end of the list of explicit ACEs, place the new list of
ACEs obtained by necessary conversion/encoding.
3. Once the converted/encoded ACEs are set, copy all the remaining
ACEs (inherited) into the new ACL.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A two line fix which I made while testing my prev fix with
cifsacl mode conversions seem to have gone missing in the final fix
that was submitted. This is that fix.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
/proc/fs/cifs/DebugData called the ip address for server sessions
"Name" which is confusing since it is not a hostname. Change
this field name to "Address" and for the list of servers add
new field "Hostname" which is populated from the hostname used
to connect to the server. See below. And also don't print
[NONE] when the interface list is empty as it is not clear
what 'NONE' referred to.
Servers:
1) ConnectionId: 0x1 Hostname: localhost
Number of credits: 389 Dialect 0x311
TCP status: 1 Instance: 1
Local Users To Server: 1 SecMode: 0x1 Req On Wire: 0
In Send: 0 In MaxReq Wait: 0
Sessions:
1) Address: 127.0.0.1
...
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ses->serverName is not the server name, but the string form
of the ip address of the server. Change the name to ip_addr
to avoid confusion (and fix the array length to match
maximum length of ipv6 address).
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix inconsistent IS_ERR and PTR_ERR in cifs_find_swn_reg(). The proper
pointer to be passed as argument to PTR_ERR() is share_name.
This bug was detected with the help of Coccinelle.
Fixes: bf80e5d425 ("cifs: Send witness register and unregister commands to userspace daemon")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Samuel Cabrero <scabrero@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Introduced a new field conn_id in TCP_Server_Info structure.
This is a non-persistent unique identifier maintained by the client
for a connection to a file server. For this, a global counter named
tcpSesNextId is maintained. On allocating a new TCP_Server_Info,
this counter is incremented and assigned.
Changed the dynamic tracepoints related to reconnects and
crediting to be more informative (with conn_id printed).
Debugging a crediting issue helped me understand the
important things to print here.
Always call dynamic tracepoints outside the scope of spinlocks.
To do this, copy out the credits and in_flight fields of the
server struct before dropping the lock.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For failure by timeout waiting for credits, changed the error
returned to the app with EBUSY, instead of ENOTSUPP. This is done
because this situation is possible even in non-buggy cases. i.e.
overloaded server can return 0 credits until done with outstanding
requests. And this feels like a better error to return to the app.
For cases of zero credits found even when there are no requests
in flight, replaced ENOTSUPP with EDEADLK, since we're avoiding
deadlock here by returning error.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We used to share the CIFS_NEG_OP flag between negotiate and
session authentication. There was an assumption in the code that
CIFS_NEG_OP is used by negotiate only. So introcuded CIFS_SESS_OP
and used it for session setup optypes.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3.1.1 is the newest, and preferred dialect, and is included in
the requested dialect list by default (ie if no vers= is specified
on mount) but it should also be requested if SMB3 or later is requested
(vers=3 instead of a specific dialect: vers=2.1, vers=3.02 or vers=3.0).
Currently specifying "vers=3" only requests smb3.0 and smb3.02 but this
patch fixes it to also request smb3.1.1 dialect, as it is the newest
and most secure dialect and is a "version 3 or later" dialect (the intent
of "vers=3").
Signed-off-by: Steve French <stfrench@microsoft.com>
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull LED fix from Pavel Machek:
"One-liner fixing a build problem"
* 'for-rc8-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: rt8515: add V4L2_FLASH_LED_CLASS dependency
- Fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
- Use pkg-config for scripts/sign-file.c CFLAGS
-----BEGIN PGP SIGNATURE-----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=Pp2I
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
- Use pkg-config for scripts/sign-file.c CFLAGS
* tag 'kbuild-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts: set proper OpenSSL include dir also for sign-file
sparc: remove wrong comment from arch/sparc/include/asm/Kbuild
kbuild: fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
- A fix for the fix to disable CET instrumentation generation for kernel code.
We forgot 32-bit, which we seem to do very often nowadays.
- A Xen PV fix to irqdomain init ordering.
-----BEGIN PGP SIGNATURE-----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=9CtU
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"I kinda knew while typing 'I hope this is the last batch of x86/urgent
updates' last week, Murphy was reading too and uttered 'Hold my
beer!'.
So here's more fixes... Thanks Murphy.
Anyway, three more x86/urgent fixes for 5.11 final. We should be
finally ready (famous last words). :-)
- An SGX use after free fix
- A fix for the fix to disable CET instrumentation generation for
kernel code. We forgot 32-bit, which we seem to do very often
nowadays
- A Xen PV fix to irqdomain init ordering"
* tag 'x86_urgent_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init()
x86/build: Disable CET instrumentation in the kernel for 32-bit too
x86/sgx: Maintain encl->refcount for each encl->mm_list entry
The leds-rt8515 driver can optionall use the v4l2 flash led class,
but it causes a link error when that class is in a loadable module
and the rt8515 driver itself is built-in:
ld.lld: error: undefined symbol: v4l2_flash_init
>>> referenced by leds-rt8515.c
>>> leds/flash/leds-rt8515.o:(rt8515_probe) in archive
drivers/built-in.a
Adding 'depends on V4L2_FLASH_LED_CLASS' in Kconfig would avoid that,
but it would make it impossible to use the driver without the
v4l2 support.
Add the same dependency that the other users of this class have
instead, which just prevents the broken configuration.
Fixes: e1c6edcbea ("leds: rt8515: Add Richtek RT8515 LED driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
These are NOT exported to userspace.
The headers listed in arch/sparc/include/uapi/asm/Kbuild are exported.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
out the correct rate to use. This fixes displays running 4k@60Hz and
some other resolutions that haven't been exercised and fully understood
until now.
-----BEGIN PGP SIGNATURE-----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=jPmu
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One small fix for the Allwinner clk driver so that display clks figure
out the correct rate to use.
This fixes displays running 4k@60Hz and some other resolutions that
haven't been exercised and fully understood until now"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: mp: fix parent rate change flag check
One fix for scsi_debug that fixes a memory leak on module removal.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYCg/NiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaFcAP0UQ9j6
1t9uUiQmYO7elxHuDvf3qLX2i5ZIupa6CXaPsQD/e04hIV4G3OStBJtYz3dY0UjH
RG7aDuJGIYXBiK0pVrk=
=5rfC
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One fix for scsi_debug that fixes a memory leak on module removal"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Fix a memory leak
Pull cgroup fixes from Tejun Heo:
"Two cgroup fixes:
- fix a NULL deref when trying to poll PSI in the root cgroup
- fix confusing controller parsing corner case when mounting cgroup
v1 hierarchies
And doc / maintainer file updates"
* 'for-5.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: update PSI file description in docs
cgroup: fix psi monitor for root cgroup
MAINTAINERS: Update my email address
MAINTAINERS: Remove stale URLs for cpuset
cgroup-v1: add disabled controller check in cgroup1_parse_param()
Merge fixes from Andrew Morton:
"6 patches.
Subsystems affected by this patch series: mm/pagemap, scripts,
MAINTAINERS, and h8300"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
h8300: fix PREEMPTION build, TI_PRE_COUNT undefined
MAINTAINERS: add Andrey Konovalov to KASAN reviewers
MAINTAINERS: update Andrey Konovalov's email address
MAINTAINERS: update KASAN file list
scripts/recordmcount.pl: support big endian for ARCH sh
m68k: make __pfn_to_phys() and __phys_to_pfn() available for !MMU
Pull i2c fix from Wolfram Sang:
"One more I2C driver bugfix"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: fix configuration of the digital filter
-----BEGIN PGP SIGNATURE-----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=7w6G
-----END PGP SIGNATURE-----
Merge tag 'for-5.11-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A regression fix caused by a refactoring in 5.11.
A corrupted superblock wouldn't be detected by checksum verification
due to wrongly placed initialization of the checksum length, thus
making memcmp always work"
* tag 'for-5.11-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: initialize fs_info::csum_size earlier in open_ctree
Fix a build error for undefined 'TI_PRE_COUNT' by adding it to
asm-offsets.c.
h8300-linux-ld: arch/h8300/kernel/entry.o: in function `resume_kernel': (.text+0x29a): undefined reference to `TI_PRE_COUNT'
Link: https://lkml.kernel.org/r/20210212021650.22740-1-rdunlap@infradead.org
Fixes: df2078b8da ("h8300: Low level entry")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel test robot reported the following issue:
CC [M] drivers/soc/litex/litex_soc_ctrl.o
sh4-linux-objcopy: Unable to change endianness of input file(s)
sh4-linux-ld: cannot find drivers/soc/litex/.tmp_gl_litex_soc_ctrl.o: No such file or directory
sh4-linux-objcopy: 'drivers/soc/litex/.tmp_mx_litex_soc_ctrl.o': No such file
The problem is that the format of input file is elf32-shbig-linux, but
sh4-linux-objcopy wants to output a file which format is elf32-sh-linux:
$ sh4-linux-objdump -d drivers/soc/litex/litex_soc_ctrl.o | grep format
drivers/soc/litex/litex_soc_ctrl.o: file format elf32-shbig-linux
Link: https://lkml.kernel.org/r/20210210150435.2171567-1-rong.a.chen@intel.com
Link: https://lore.kernel.org/linux-mm/202101261118.GbbYSlHu-lkp@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recent changes that obsoleted DISCONTIGMEM on m68k switched the MMU
variant to use generic definitions of __pfn_to_phys() and __phys_to_pfn(),
but missed the !MMU variant which caused a build failure:
drivers/media/common/videobuf2/videobuf2-dma-contig.c: In function 'vb2_dc_get_userptr':
drivers/media/common/videobuf2/videobuf2-dma-contig.c:509:5: error: implicit declaration of function '__pfn_to_phys' [-Werror=implicit-function-declaration]
509 | __pfn_to_phys(nums[0]), size, buf->dma_dir, 0);
| ^~~~~~~~~~~~~
cc1: some warnings being treated as errors
Enable __pfn_to_phys() and __phys_to_pfn() on !MMU builds.
Link: https://lkml.kernel.org/r/20210211232202.GS299309@linux.ibm.com
Fixes: 4bfc848e09 ("m68k/mm: enable use of generic memory_model.h for !DISCONTIGMEM")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmAm8mYACgkQiiy9cAdy
T1FDMgwArdtgQtRL9hSOINBl19/OM9GSLszUtI/EctfZGgnGoNysIq4/pIvv7uqE
egVohlVwJI4niGguU7AABj5vrthLsAbmzKi+e2N6kAcYtzpXeLvjkXVfyq/Bld66
oe7sYWMjH1TFEc64gejW7nYcxOsg93HQtAvNyyoAS3SlOOWsl2LI/AQiw3BXXVBo
Jb1AkfpdBGglUW7esYVZUyVwCI/ZzYVEA0YTCpaGX+EIfdCWXm3ArNPP7E9gHOLb
3HUbNP6W5QKwgYL1tPX3s7AFEtj0+PxuREgB6mSTFOkWRRfZJUTma1AEfa9MUWGA
KOnQKiIzIsmaOQGP/BumcrPr/7kgeqYEFZ2exNT8kVw6ETEHP1+A4j61KZI0mduz
rgnQx21gPzVcDo0tfO8SjGSt3vzuRA+vkyZO4eB/nmTqJ4YVqX+E6E4vophKOUk2
ELqk0fUlX3uspqocZCor5nrLA0EadNV6P/LfFiRyGUTt+tOcOeYmyAdK7dWY1JTf
wsd20mCY
=vJKS
-----END PGP SIGNATURE-----
Merge tag '5.11-rc7-smb3-github' of git://github.com/smfrench/smb3-kernel
Pull cifs fixes from Steve French:
"Four small smb3 fixes to the new mount API (including a particularly
important one for DFS links).
These were found in testing this week of additional DFS scenarios, and
a user testing of an apache container problem"
* tag '5.11-rc7-smb3-github' of git://github.com/smfrench/smb3-kernel:
cifs: Set CIFS_MOUNT_USE_PREFIX_PATH flag on setting cifs_sb->prepath.
cifs: In the new mount api we get the full devname as source=
cifs: do not disable noperm if multiuser mount option is not provided
cifs: fix dfs-links
-----BEGIN PGP SIGNATURE-----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=y7ZL
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-02-12' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Revert of a patch from this release that caused a regression"
* tag 'io_uring-5.11-2021-02-12' of git://git.kernel.dk/linux-block:
Revert "io_uring: don't take fs for recvmsg/sendmsg"
ttm:
- page pool regression fix.
dp_mst:
- Don't report un-attached ports as connected
amdgpu:
- Blank screen fix
i915:
- Ensure Type-C FIA is powered when initializing
- Fix overlay frontbuffer tracking
sun4i:
- tcon1 sync polarity fix
- Always set HDMI clock rate
- Fix H6 HDMI PHY config
- Fix H6 max frequency
vc4:
- Fix buffer overflow
xlnx:
- Fix memory leak
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJgJf1KAAoJEAx081l5xIa+CwYQAKj4UzfoZnjLH7174FiLsbmJ
DzOXcLIjQkMWSmMUnTmUmUclBSTexXaIm7sUzbHNsjpIet+cjxVQo8UhatOokM48
YrNnYRnkReiy2rLJYMB5tSPDXAh8BNuZDGXiN4AEPdxErFK0DsisDzSSYZJfg01M
Qpt/diCJRu4T3Hr+YletfxWV+Dqq5m79zXmMfr1NlCW4D1V1WLEVW1zyb5rTFiTn
goBis52fL2FWTe9DVFa+VVDqCeQxMxs4/gFsZoY5IMTy/w+4YI9gy4BElnyDcOoW
kWz7rjUNl5Hy1BG3YrH9egzKktlGzqHuD6x8bp/PbQdgL8w9m/hvKghYssByHDs0
WBhEg8gd9XviWRfIdNuFeJ4/jq6kMlmLEzZKbcBUpP7Du5/c3rUMqhHFTilz4y7y
8kNDAG5rtL/9b8um0H2MR179qYspRiL0XhG0HL4YZuopfruhmky8gkRhYcsOHkPR
WYFR321FItpXFTw8/gUdudeEr2KssWZ9Ob2lBO960Or2JEtWPYSk1F3G7SCt6N+L
IalFXYRMG2OfAiNjjiVEiZNFe1dgpfy89tka5bVnVuuBEYx+DjU7ZTl3i4xAxtYG
X8WA1de0FzuYiiEUBrrYe8s6YFBEo4Z20dlA1ghYU/rMEXNfte0RVW8DAdsKiTwd
Bqt8tCb6CblCNPxbkeQ3
=HSyG
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-02-12' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes for final, there is a ttm regression fix, dp-mst fix,
one amdgpu revert, two i915 fixes, and some misc fixes for sun4i,
xlnx, and vc4.
All pretty quiet and don't think we have any known outstanding
regressions.
ttm:
- page pool regression fix.
dp_mst:
- don't report un-attached ports as connected
amdgpu:
- blank screen fix
i915:
- ensure Type-C FIA is powered when initializing
- fix overlay frontbuffer tracking
sun4i:
- tcon1 sync polarity fix
- always set HDMI clock rate
- fix H6 HDMI PHY config
- fix H6 max frequency
vc4:
- fix buffer overflow
xlnx:
- fix memory leak"
* tag 'drm-fixes-2021-02-12' of git://anongit.freedesktop.org/drm/drm:
drm/ttm: make sure pool pages are cleared
drm/sun4i: dw-hdmi: Fix max. frequency for H6
drm/sun4i: Fix H6 HDMI PHY configuration
drm/sun4i: dw-hdmi: always set clock rate
drm/sun4i: tcon: set sync polarity for tcon1 channel
drm/i915: Fix overlay frontbuffer tracking
Revert "drm/amd/display: Update NV1x SR latency values"
drm/i915/tgl+: Make sure TypeC FIA is powered up when initializing it
drm/dp_mst: Don't report ports connected if nothing is attached to them
drm/xlnx: fix kmemleak by sending vblank_event in atomic_disable
drm/vc4: hvs: Fix buffer overflow with the dlist handling
It was reported that if an trace event was larger than a page
and was filtered, that it caused memory corruption. The reason
is that filtered events first go into a buffer to test the filter
before being written into the ring buffer. Unfortunately,
this write did not check the size.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYCaSHBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqOpAQCUSlZdBxLzs87zeHgXbkMudWvCYSbA
mndzddqtxPXlXwEAsRnO8BERyZnasEdXnJ98JJwQaFFYH0dBCA2pTU2onQc=
=NokV
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix buffer overflow in trace event filter.
It was reported that if an trace event was larger than a page and was
filtered, that it caused memory corruption. The reason is that
filtered events first go into a buffer to test the filter before being
written into the ring buffer. Unfortunately, this write did not check
the size"
* tag 'trace-v5.11-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Check length before giving out the filter buffer
