On 32bit, before patcheset that only set page table for ram, we only
call that one time.
Now, we are calling that during every init_memory_mapping if we have holes
under max_low_pfn.
We should only call it one time after all ranges under max_low_page get
mapped just like we did before.
Also that could avoid the risk to run out of pgt_buf in BRK.
Need to update page_table_range_init() to count the pages for kmap page table
at first, and use new added alloc_low_pages() to get pages in sequence.
That will conform to the requirement that pages need to be in low to high order.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-30-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
32bit kmap mapping needs pages to be used for low to high.
At this point those pages are still from pgt_buf_* from BRK, so it is
ok now.
But we want to move early_ioremap_page_table_range_init() out of
init_memory_mapping() and only call it one time later, that will
make page_table_range_init/page_table_kmap_check/alloc_low_page to
use memblock to get page.
memblock allocation for pages are from high to low.
So will get panic from page_table_kmap_check() that has BUG_ON to do
ordering checking.
This patch add alloc_low_pages to make it possible to allocate serveral
pages at first, and hand out pages one by one from low to high.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-28-git-send-email-yinghai@kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Page table area are pre-mapped now after
x86, mm: setup page table in top-down
x86, mm: Remove early_memremap workaround for page table accessing on 64bit
mapping_pagetable_reserve is not used anymore, so remove it.
Also remove operation in mask_rw_pte(), as modified allow_low_page
always return pages that are already mapped, moreover
xen_alloc_pte_init, xen_alloc_pmd_init, etc, will mark the page RO
before hooking it into the pagetable automatically.
-v2: add changelog about mask_rw_pte() from Stefano.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-27-git-send-email-yinghai@kernel.org
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
They are almost same except 64 bit need to handle after_bootmem case.
Add mm_internal.h to make that alloc_low_page() only to be accessible
from arch/x86/mm/init*.c
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-25-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Now all page table buf are pre-mapped, and could use virtual address directly.
So don't need to remember physical address anymore.
Remove that phys pointer in alloc_low_page(), and that will allow us to merge
alloc_low_page between 64bit and 32bit.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-24-git-send-email-yinghai@kernel.org
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
We try to put page table high to make room for kdump, and at that time
those ranges are not mapped yet, and have to use ioremap to access it.
Now after patch that pre-map page table top down.
x86, mm: setup page table in top-down
We do not need that workaround anymore.
Just use __va to return directly mapping address.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-23-git-send-email-yinghai@kernel.org
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Get pgt_buf early from BRK, and use it to map PMD_SIZE from top at first.
Then use mapped pages to map more ranges below, and keep looping until
all pages get mapped.
alloc_low_page will use page from BRK at first, after that buffer is used
up, will use memblock to find and reserve pages for page table usage.
Introduce min_pfn_mapped to make sure find new pages from mapped ranges,
that will be updated when lower pages get mapped.
Also add step_size to make sure that don't try to map too big range with
limited mapped pages initially, and increase the step_size when we have
more mapped pages on hand.
We don't need to call pagetable_reserve anymore, reserve work is done
in alloc_low_page() directly.
At last we can get rid of calculation and find early pgt related code.
-v2: update to after fix_xen change,
also use MACRO for initial pgt_buf size and add comments with it.
-v3: skip big reserved range in memblock.reserved near end.
-v4: don't need fix_xen change now.
-v5: add changelog about moving about reserving pagetable to alloc_low_page.
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-22-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
After we add code use buffer in BRK to pre-map buf for page table in
following patch:
x86, mm: setup page table in top-down
it should be safe to remove early_memmap for page table accessing.
Instead we get panic with that.
It turns out that we clear the initial page table wrongly for next range
that is separated by holes.
And it only happens when we are trying to map ram range one by one.
We need to check if the range is ram before clearing page table.
We change the loop structure to remove the extra little loop and use
one loop only, and in that loop will caculate next at first, and check if
[addr,next) is covered by E820_RAM.
-v2: E820_RESERVED_KERN is treated as E820_RAM. EFI one change some E820_RAM
to that, so next kernel by kexec will know that range is used already.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-20-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
We could map small range in the middle of big range at first, so should use
big page size at first to avoid using small page size to break down page table.
Only can set big page bit when that range has ram area around it.
-v2: fix 32bit boundary checking. We can not count ram above max_low_pfn
for 32 bit.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-19-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
We are going to use buffer in BRK to map small range just under memory top,
and use those new mapped ram to map ram range under it.
The ram range that will be mapped at first could be only page aligned,
but ranges around it are ram too, we could use bigger page to map it to
avoid small page size.
We will adjust page_size_mask in following patch:
x86, mm: Use big page size for small memory range
to use big page size for small ram range.
Before that patch, this patch will make sure start address to be
aligned down according to bigger page size, otherwise entry in page
page will not have correct value.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-18-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Currently direct mappings are created for [ 0 to max_low_pfn<<PAGE_SHIFT )
and [ 4GB to max_pfn<<PAGE_SHIFT ), which may include regions that are not
backed by actual DRAM. This is fine for holes under 4GB which are covered
by fixed and variable range MTRRs to be UC. However, we run into trouble
on higher memory addresses which cannot be covered by MTRRs.
Our system with 1TB of RAM has an e820 that looks like this:
BIOS-e820: [mem 0x0000000000000000-0x00000000000983ff] usable
BIOS-e820: [mem 0x0000000000098400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c7ebffff] usable
BIOS-e820: [mem 0x00000000c7ec0000-0x00000000c7ed7fff] ACPI data
BIOS-e820: [mem 0x00000000c7ed8000-0x00000000c7ed9fff] ACPI NVS
BIOS-e820: [mem 0x00000000c7eda000-0x00000000c7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000e037ffffff] usable
BIOS-e820: [mem 0x000000e038000000-0x000000fcffffffff] reserved
BIOS-e820: [mem 0x0000010000000000-0x0000011ffeffffff] usable
and so direct mappings are created for huge memory hole between
0x000000e038000000 to 0x0000010000000000. Even though the kernel never
generates memory accesses in that region, since the page tables mark
them incorrectly as being WB, our (AMD) processor ends up causing a MCE
while doing some memory bookkeeping/optimizations around that area.
This patch iterates through e820 and only direct maps ranges that are
marked as E820_RAM, and keeps track of those pfn ranges. Depending on
the alignment of E820 ranges, this may possibly result in using smaller
size (i.e. 4K instead of 2M or 1G) page tables.
-v2: move changes from setup.c to mm/init.c, also use for_each_mem_pfn_range
instead. - Yinghai Lu
-v3: add calculate_all_table_space_size() to get correct needed page table
size. - Yinghai Lu
-v4: fix add_pfn_range_mapped() to get correct max_low_pfn_mapped when
mem map does have hole under 4g that is found by Konard on xen
domU with 8g ram. - Yinghai
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Link: http://lkml.kernel.org/r/1353123563-3103-16-git-send-email-yinghai@kernel.org
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
We are going to map ram only, so under max_low_pfn_mapped,
between 4g and max_pfn_mapped does not mean mapped at all.
Use pfn_range_is_mapped() directly.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-13-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
It should take physical address range that will need to be mapped.
find_early_table_space should take range that pgt buff should be in.
Separating page table size calculating and finding early page table to
reduce confusing.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-9-git-send-email-yinghai@kernel.org
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
We should not do that in every calling of init_memory_mapping.
At the same time need to move down early_memtest, and could remove after_bootmem
checking.
-v2: fix one early_memtest with 32bit by passing max_pfn_mapped instead.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-8-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
After
| commit 8548c84da2
| Author: Takashi Iwai <tiwai@suse.de>
| Date: Sun Oct 23 23:19:12 2011 +0200
|
| x86: Fix S4 regression
|
| Commit 4b239f458 ("x86-64, mm: Put early page table high") causes a S4
| regression since 2.6.39, namely the machine reboots occasionally at S4
| resume. It doesn't happen always, overall rate is about 1/20. But,
| like other bugs, once when this happens, it continues to happen.
|
| This patch fixes the problem by essentially reverting the memory
| assignment in the older way.
Have some page table around 512M again, that will prevent kdump to find 512M
under 768M.
We need revert that reverting, so we could put page table high again for 64bit.
Takashi agreed that S4 regression could be something else.
https://lkml.org/lkml/2012/6/15/182
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-6-git-send-email-yinghai@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Now init_memory_mapping is called two times, later will be called for every
ram ranges.
Could put all related init_mem calling together and out of setup.c.
Actually, it reverts commit 1bbbbe7
x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping.
will address that later with complete solution include handling hole under 4g.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-5-git-send-email-yinghai@kernel.org
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
So make init_memory_mapping smaller and readable.
-v2: use 0 instead of nr_range as input parameter found by Yasuaki Ishimatsu.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-3-git-send-email-yinghai@kernel.org
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Now we pass around use_gbpages and use_pse for calculating page table size,
Later we will need to call init_memory_mapping for every ram range one by one,
that mean those calculation will be done several times.
Those information are the same for all ram range and could be stored in
page_size_mask and could be probed it one time only.
Move that probing code out of init_memory_mapping into separated function
probe_page_size_mask(), and call it before all init_memory_mapping.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1353123563-3103-2-git-send-email-yinghai@kernel.org
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
When I made an attempt at separating __pa_symbol and __pa I found that there
were a number of cases where __pa was used on an obvious symbol.
I also caught one non-obvious case as _brk_start and _brk_end are based on the
address of __brk_base which is a C visible symbol.
In mark_rodata_ro I was able to reduce the overhead of kernel symbol to
virtual memory translation by using a combination of __va(__pa_symbol())
instead of page_address(virt_to_page()).
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Link: http://lkml.kernel.org/r/20121116215640.8521.80483.stgit@ahduyck-cp1.jf.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
I submitted an earlier patch that make __phys_addr an inline. This obviously
results in an increase in the code size. One step I can take to reduce that
is to make it so that the __pa_symbol call does a direct translation for
kernel addresses instead of covering all of virtual memory.
On my system this reduced the size for __pa_symbol from 5 instructions
totalling 30 bytes to 3 instructions totalling 16 bytes.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Link: http://lkml.kernel.org/r/20121116215356.8521.92472.stgit@ahduyck-cp1.jf.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch is meant to improve overall system performance when making use of
the __phys_addr call. To do this I have implemented several changes.
First if CONFIG_DEBUG_VIRTUAL is not defined __phys_addr is made an inline,
similar to how this is currently handled in 32 bit. However in order to do
this it is required to export phys_base so that it is available if __phys_addr
is used in kernel modules.
The second change was to streamline the code by making use of the carry flag
on an add operation instead of performing a compare on a 64 bit value. The
advantage to this is that it allows us to significantly reduce the overall
size of the call. On my Xeon E5 system the entire __phys_addr inline call
consumes a little less than 32 bytes and 5 instructions. I also applied
similar logic to the debug version of the function. My testing shows that the
debug version of the function with this patch applied is slightly faster than
the non-debug version without the patch.
Finally I also applied the same logic changes to __virt_addr_valid since it
used the same general code flow as __phys_addr and could achieve similar gains
though these changes.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Link: http://lkml.kernel.org/r/20121116215315.8521.46270.stgit@ahduyck-cp1.jf.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
commit 611ae8e3f5204f7480b3b405993b3352cfa16662('enable tlb flush range
support for x86') change flush_tlb_mm_range() considerably. After this,
we test whether vmflag equal to VM_HUGETLB and it may be always failed,
because vmflag usually has other flags simultaneously.
Our intention is to check whether this vma is for hughtlb, so correct it
according to this purpose.
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Acked-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1352740656-19417-1-git-send-email-js1304@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Other than ix86, x86-64 on EFI so far didn't set the
{g,s}et_wallclock accessors to the EFI routines, thus
incorrectly using raw RTC accesses instead.
Simply removing the #ifdef around the respective code isn't
enough, however: While so far early get-time calls were done in
physical mode, this doesn't work properly for x86-64, as virtual
addresses would still need to be set up for all runtime regions
(which wasn't the case on the system I have access to), so
instead the patch moves the call to efi_enter_virtual_mode()
ahead (which in turn allows to drop all code related to calling
efi-get-time in physical mode).
Additionally the earlier calling of efi_set_executable()
requires the CPA code to cope, i.e. during early boot it must be
avoided to call cpa_flush_array(), as the first thing this
function does is a BUG_ON(irqs_disabled()).
Also make the two EFI functions in question here static -
they're not being referenced elsewhere.
History:
This commit was originally merged as bacef661ac ("x86-64/efi:
Use EFI to deal with platform wall clock") but it resulted in some
ASUS machines no longer booting due to a firmware bug, and so was
reverted in f026cfa82f. A pre-emptive fix for the buggy ASUS
firmware was merged in 03a1c254975e ("x86, efi: 1:1 pagetable
mapping for virtual EFI calls") so now this patch can be
reapplied.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com> [added commit history]
There are various pieces of code in arch/x86 that require a page table
with an identity mapping. Make trampoline_pgd a proper kernel page
table, it currently only includes the kernel text and module space
mapping.
One new feature of trampoline_pgd is that it now has mappings for the
physical I/O device addresses, which are inserted at ioremap()
time. Some broken implementations of EFI firmware require these
mappings to always be around.
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Commit
844ab6f9 x86, mm: Find_early_table_space based on ranges that are actually being mapped
added back some lines back wrongly that has been removed in commit
7b16bbf97 Revert "x86/mm: Fix the size calculation of mapping tables"
remove them again.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/CAE9FiQW_vuaYQbmagVnxT2DGsYc=9tNeAbdBq53sYkitPOwxSQ@mail.gmail.com
Acked-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Current logic finds enough space for direct mapping page tables from 0
to end. Instead, we only need to find enough space to cover mr[0].start
to mr[nr_range].end -- the range that is actually being mapped by
init_memory_mapping()
This is needed after 1bbbbe779a, to address
the panic reported here:
https://lkml.org/lkml/2012/10/20/160https://lkml.org/lkml/2012/10/21/157
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Link: http://lkml.kernel.org/r/20121024195311.GB11779@jshin-Toonie
Tested-by: Tom Rini <trini@ti.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Commit 20167d3421 ("x86-64: Fix
accounting in kernel_physical_mapping_init()") went a little too
far by entirely removing the counting of pre-populated page
tables: this should be done at boot time (to cover the page
tables set up in early boot code), but shouldn't be done during
memory hot add.
Hence, re-add the removed increments of "pages", but make them
and the one in phys_pte_init() conditional upon !after_bootmem.
Reported-Acked-and-Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/506DAFBA020000780009FA8C@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
722bc6b167 x86/mm: Fix the size calculation of mapping tables
Tried to address the issue that the first 2/4M should use 4k pages
if PSE enabled, but extra counts should only be valid for x86_32.
This commit caused a kdump regression: the kdump kernel hangs.
Work is in progress to fundamentally fix the various page table
initialization issues that we have, via the design suggested
by H. Peter Anvin, but it's not ready yet to be merged.
So, to get a working kdump revert to the last known working version,
which is the revert of this commit and of a followup fix (which was
incomplete):
bd2753b2dd x86/mm: Only add extra pages count for the first memory range during pre-allocation
Tested kdump on physical and virtual machines.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Flavio Leitner <fbl@redhat.com>
Tested-by: Flavio Leitner <fbl@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Flavio Leitner <fbl@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: ianfang.cn@gmail.com
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
.fault now can retry. The retry can break state machine of .fault. In
filemap_fault, if page is miss, ra->mmap_miss is increased. In the second
try, since the page is in page cache now, ra->mmap_miss is decreased. And
these are done in one fault, so we can't detect random mmap file access.
Add a new flag to indicate .fault is tried once. In the second try, skip
ra->mmap_miss decreasing. The filemap_fault state machine is ok with it.
I only tested x86, didn't test other archs, but looks the change for other
archs is obvious, but who knows :)
Signed-off-by: Shaohua Li <shaohua.li@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide rb_insert_augmented() and rb_erase_augmented() through a new
rbtree_augmented.h include file. rb_erase_augmented() is defined there as
an __always_inline function, in order to allow inlining of augmented
rbtree callbacks into it. Since this generates a relatively large
function, each augmented rbtree user should make sure to have a single
call site.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement an interval tree as a replacement for the VMA prio_tree. The
algorithms are similar to lib/interval_tree.c; however that code can't be
directly reused as the interval endpoints are not explicitly stored in the
VMA. So instead, the common algorithm is moved into a template and the
details (node type, how to get interval endpoints from the node, etc) are
filled in using the C preprocessor.
Once the interval tree functions are available, using them as a
replacement to the VMA prio tree is a relatively simple, mechanical job.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As proposed by Peter Zijlstra, this makes it easier to define the augmented
rbtree callbacks.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
convert arch/x86/mm/pat_rbtree.c to the proposed augmented rbtree api
and remove the old augmented rbtree implementation.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT.
We can toss mapping address from remap_pfn_range() into
track_pfn_vma_new(), and collect all PAT-related logic together in
arch/x86/.
This patch also restores orignal frustration-free is_cow_mapping() check
in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73
("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3")
is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c,
because it already handled by VM_PFNMAP in VM_NO_THP bit-mask.
[suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With PAT enabled, vm_insert_pfn() looks up the existing pfn memory
attribute and uses it. Expectation is that the driver reserves the
memory attributes for the pfn before calling vm_insert_pfn().
remap_pfn_range() (when called for the whole vma) will setup a new
attribute (based on the prot argument) for the specified pfn range.
This addresses the legacy usage which typically calls remap_pfn_range()
with a desired memory attribute. For ranges smaller than the vma size
(which is typically not the case), remap_pfn_range() will use the
existing memory attribute for the pfn range.
Expose two different API's for these different behaviors.
track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn()
and track_pfn_remap() for the remap_pfn_range().
This cleanup also prepares the ground for the track/untrack pfn vma
routines to take over the ownership of setting PAT specific vm_flag in
the 'vma'.
[khlebnikov@openvz.org: Clear checks in track_pfn_remap()]
[akpm@linux-foundation.org: tweak a few comments]
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'pfn' argument for track_pfn_vma_new() can be used for reserving the
attribute for the pfn range. No need to depend on 'vm_pgoff'
Similarly, untrack_pfn_vma() can depend on the 'pfn' argument if it is
non-zero or can use follow_phys() to get the starting value of the pfn
range.
Also the non zero 'size' argument can be used instead of recomputing it
from vma.
This cleanup also prepares the ground for the track/untrack pfn vma
routines to take over the ownership of setting PAT specific vm_flag in the
'vma'.
[khlebnikov@openvz.org: Clear pfn to paddr conversion]
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86/smap support from Ingo Molnar:
"This adds support for the SMAP (Supervisor Mode Access Prevention) CPU
feature on Intel CPUs: a hardware feature that prevents unintended
user-space data access from kernel privileged code.
It's turned on automatically when possible.
This, in combination with SMEP, makes it even harder to exploit kernel
bugs such as NULL pointer dereferences."
Fix up trivial conflict in arch/x86/kernel/entry_64.S due to newly added
includes right next to each other.
* 'x86-smap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, smep, smap: Make the switching functions one-way
x86, suspend: On wakeup always initialize cr4 and EFER
x86-32: Start out eflags and cr4 clean
x86, smap: Do not abuse the [f][x]rstor_checking() functions for user space
x86-32, smap: Add STAC/CLAC instructions to 32-bit kernel entry
x86, smap: Reduce the SMAP overhead for signal handling
x86, smap: A page fault due to SMAP is an oops
x86, smap: Turn on Supervisor Mode Access Prevention
x86, smap: Add STAC and CLAC instructions to control user space access
x86, uaccess: Merge prototypes for clear_user/__clear_user
x86, smap: Add a header file with macros for STAC/CLAC
x86, alternative: Add header guards to <asm/alternative-asm.h>
x86, alternative: Use .pushsection/.popsection
x86, smap: Add CR4 bit for SMAP
x86-32, mm: The WP test should be done on a kernel page
Pull x86/platform changes from Ingo Molnar:
"This cleans up some Xen-induced pagetable init code uglies, by
generalizing new platform callbacks and state: x86_init.paging.*"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Document x86_init.paging.pagetable_init()
x86: xen: Cleanup and remove x86_init.paging.pagetable_setup_done()
x86: Move paging_init() call to x86_init.paging.pagetable_init()
x86: Rename pagetable_setup_start() to pagetable_init()
x86: Remove base argument from x86_init.paging.pagetable_setup_start
Pull x86/mm changes from Ingo Molnar:
"The biggest change is new TLB partial flushing code for AMD CPUs.
(The v3.6 kernel had the Intel CPU side code, see commits
e0ba94f14f74..effee4b9b3b.)
There's also various other refinements around the TLB flush code"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Distinguish TLB shootdown interrupts from other functions call interrupts
x86/mm: Fix range check in tlbflush debugfs interface
x86, cpu: Preset default tlb_flushall_shift on AMD
x86, cpu: Add AMD TLB size detection
x86, cpu: Push TLB detection CPUID check down
x86, cpu: Fixup tlb_flushall_shift formatting
As TLB shootdown requests to other CPU cores are now using function call
interrupts, TLB shootdowns entry in /proc/interrupts is always shown as 0.
This behavior change was introduced by commit 52aec3308d ("x86/tlb:
replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR").
This patch reverts TLB shootdowns entry in /proc/interrupts to count TLB
shootdowns separately from the other function call interrupts.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Link: http://lkml.kernel.org/r/20120926021128.22212.20440.stgit@hpxw
Acked-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Add necessary hooks to x86 exception for userspace
RCU extended quiescent state support.
This includes traps, page fault, debug exceptions, etc...
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sven-Thorsten Dietrich <thebigcorporation@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
At this stage x86_init.paging.pagetable_setup_done is only used in the
XEN case. Move its content in the x86_init.paging.pagetable_init setup
function and remove the now unused x86_init.paging.pagetable_setup_done
remaining infrastructure.
Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Acked-by: <konrad.wilk@oracle.com>
Cc: <Ian.Campbell@citrix.com>
Cc: <Stefano.Stabellini@eu.citrix.com>
Cc: <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/1345580561-8506-5-git-send-email-attilio.rao@citrix.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the paging_init() call to the platform specific pagetable_init()
function, so we can get rid of the extra pagetable_setup_done()
function pointer.
Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Acked-by: <konrad.wilk@oracle.com>
Cc: <Ian.Campbell@citrix.com>
Cc: <Stefano.Stabellini@eu.citrix.com>
Cc: <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/1345580561-8506-4-git-send-email-attilio.rao@citrix.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In preparation for unifying the pagetable_setup_start() and
pagetable_setup_done() setup functions, rename appropriately all the
infrastructure related to pagetable_setup_start().
Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Ackedd-by: <konrad.wilk@oracle.com>
Cc: <Ian.Campbell@citrix.com>
Cc: <Stefano.Stabellini@eu.citrix.com>
Cc: <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/1345580561-8506-3-git-send-email-attilio.rao@citrix.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We either use swapper_pg_dir or the argument is unused. Preparatory
patch to simplify platform pagetable setup further.
Signed-off-by: Attilio Rao <attilio.rao@citrix.com>
Ackedb-by: <konrad.wilk@oracle.com>
Cc: <Ian.Campbell@citrix.com>
Cc: <Stefano.Stabellini@eu.citrix.com>
Cc: <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/1345580561-8506-2-git-send-email-attilio.rao@citrix.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since the shift count settable there is used for shifting values
of type "unsigned long", its value must not match or exceed
BITS_PER_LONG (otherwise the shift operations are undefined).
Similarly, the value must not be negative (but -1 must be
permitted, as that's the value used to distinguish the case of
the fine grained flushing being disabled).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/5049B65C020000780009990C@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Each page mapped in a process's address space must be correctly
accounted for in _mapcount. Normally the rules for this are
straightforward but hugetlbfs page table sharing is different. The page
table pages at the PMD level are reference counted while the mapcount
remains the same.
If this accounting is wrong, it causes bugs like this one reported by
Larry Woodman:
kernel BUG at mm/filemap.c:135!
invalid opcode: 0000 [#1] SMP
CPU 22
Modules linked in: bridge stp llc sunrpc binfmt_misc dcdbas microcode pcspkr acpi_pad acpi]
Pid: 18001, comm: mpitest Tainted: G W 3.3.0+ #4 Dell Inc. PowerEdge R620/07NDJ2
RIP: 0010:[<ffffffff8112cfed>] [<ffffffff8112cfed>] __delete_from_page_cache+0x15d/0x170
Process mpitest (pid: 18001, threadinfo ffff880428972000, task ffff880428b5cc20)
Call Trace:
delete_from_page_cache+0x40/0x80
truncate_hugepages+0x115/0x1f0
hugetlbfs_evict_inode+0x18/0x30
evict+0x9f/0x1b0
iput_final+0xe3/0x1e0
iput+0x3e/0x50
d_kill+0xf8/0x110
dput+0xe2/0x1b0
__fput+0x162/0x240
During fork(), copy_hugetlb_page_range() detects if huge_pte_alloc()
shared page tables with the check dst_pte == src_pte. The logic is if
the PMD page is the same, they must be shared. This assumes that the
sharing is between the parent and child. However, if the sharing is
with a different process entirely then this check fails as in this
diagram:
parent
|
------------>pmd
src_pte----------> data page
^
other--------->pmd--------------------|
^
child-----------|
dst_pte
For this situation to occur, it must be possible for Parent and Other to
have faulted and failed to share page tables with each other. This is
possible due to the following style of race.
PROC A PROC B
copy_hugetlb_page_range copy_hugetlb_page_range
src_pte == huge_pte_offset src_pte == huge_pte_offset
!src_pte so no sharing !src_pte so no sharing
(time passes)
hugetlb_fault hugetlb_fault
huge_pte_alloc huge_pte_alloc
huge_pmd_share huge_pmd_share
LOCK(i_mmap_mutex)
find nothing, no sharing
UNLOCK(i_mmap_mutex)
LOCK(i_mmap_mutex)
find nothing, no sharing
UNLOCK(i_mmap_mutex)
pmd_alloc pmd_alloc
LOCK(instantiation_mutex)
fault
UNLOCK(instantiation_mutex)
LOCK(instantiation_mutex)
fault
UNLOCK(instantiation_mutex)
These two processes are not poing to the same data page but are not
sharing page tables because the opportunity was missed. When either
process later forks, the src_pte == dst pte is potentially insufficient.
As the check falls through, the wrong PTE information is copied in
(harmless but wrong) and the mapcount is bumped for a page mapped by a
shared page table leading to the BUG_ON.
This patch addresses the issue by moving pmd_alloc into huge_pmd_share
which guarantees that the shared pud is populated in the same critical
section as pmd. This also means that huge_pte_offset test in
huge_pmd_share is serialized correctly now which in turn means that the
success of the sharing will be higher as the racing tasks see the pud
and pmd populated together.
Race identified and changelog written mostly by Mel Gorman.
{akpm@linux-foundation.org: attempt to make the huge_pmd_share() comment comprehensible, clean up coding style]
Reported-by: Larry Woodman <lwoodman@redhat.com>
Tested-by: Larry Woodman <lwoodman@redhat.com>
Reviewed-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Ken Chen <kenchen@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit bacef661ac.
This commit has been found to cause serious regressions on a number of
ASUS machines at the least. We probably need to provide a 1:1 map in
addition to the EFI virtual memory map in order for this to work.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reported-and-bisected-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120805172903.5f8bb24c@zougloub.eu
Otherwise you could run into:
WARN_ON in numa_register_memblks(), because node_possible_map is zero
References: https://bugzilla.novell.com/show_bug.cgi?id=757888
On this machine (ProLiant ML570 G3) the SRAT table contains:
- No processor affinities
- One memory affinity structure (which is set disabled)
CC: Per Jessen <per@opensuse.org>
CC: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull x86/mm changes from Peter Anvin:
"The big change here is the patchset by Alex Shi to use INVLPG to flush
only the affected pages when we only need to flush a small page range.
It also removes the special INVALIDATE_TLB_VECTOR interrupts (32
vectors!) and replace it with an ordinary IPI function call."
Fix up trivial conflicts in arch/x86/include/asm/apic.h (added code next
to changed line)
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tlb: Fix build warning and crash when building for !SMP
x86/tlb: do flush_tlb_kernel_range by 'invlpg'
x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR
x86/tlb: enable tlb flush range support for x86
mm/mmu_gather: enable tlb flush range in generic mmu_gather
x86/tlb: add tlb_flushall_shift knob into debugfs
x86/tlb: add tlb_flushall_shift for specific CPU
x86/tlb: fall back to flush all when meet a THP large page
x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range
x86/tlb_info: get last level TLB entry number of CPU
x86: Add read_mostly declaration/definition to variables from smp.h
x86: Define early read-mostly per-cpu macros
Pul x86/efi changes from Ingo Molnar:
"This tree adds an EFI bootloader handover protocol, which, once
supported on the bootloader side, will make bootup faster and might
result in simpler bootloaders.
The other change activates the EFI wall clock time accessors on x86-64
as well, instead of the legacy RTC readout."
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, efi: Handover Protocol
x86-64/efi: Use EFI to deal with platform wall clock
This patch do flush_tlb_kernel_range by 'invlpg'. The performance pay
and gain was analyzed in previous patch
(x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range).
In the testing: http://lkml.org/lkml/2012/6/21/10
The pay is mostly covered by long kernel path, but the gain is still
quite clear, memory access in user APP can increase 30+% when kernel
execute this funtion.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-10-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
There are 32 INVALIDATE_TLB_VECTOR now in kernel. That is quite big
amount of vector in IDT. But it is still not enough, since modern x86
sever has more cpu number. That still causes heavy lock contention
in TLB flushing.
The patch using generic smp call function to replace it. That saved 32
vector number in IDT, and resolved the lock contention in TLB
flushing on large system.
In the NHM EX machine 4P * 8cores * HT = 64 CPUs, hackbench pthread
has 3% performance increase.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-9-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Not every tlb_flush execution moment is really need to evacuate all
TLB entries, like in munmap, just few 'invlpg' is better for whole
process performance, since it leaves most of TLB entries for later
accessing.
This patch also rewrite flush_tlb_range for 2 purposes:
1, split it out to get flush_blt_mm_range function.
2, clean up to reduce line breaking, thanks for Borislav's input.
My micro benchmark 'mummap' http://lkml.org/lkml/2012/5/17/59
show that the random memory access on other CPU has 0~50% speed up
on a 2P * 4cores * HT NHM EP while do 'munmap'.
Thanks Yongjie's testing on this patch:
-------------
I used Linux 3.4-RC6 w/ and w/o his patches as Xen dom0 and guest
kernel.
After running two benchmarks in Xen HVM guest, I found his patches
brought about 1%~3% performance gain in 'kernel build' and 'netperf'
testing, though the performance gain was not very stable in 'kernel
build' testing.
Some detailed testing results are below.
Testing Environment:
Hardware: Romley-EP platform
Xen version: latest upstream
Linux kernel: 3.4-RC6
Guest vCPU number: 8
NIC: Intel 82599 (10GB bandwidth)
In 'kernel build' testing in guest:
Command line | performance gain
make -j 4 | 3.81%
make -j 8 | 0.37%
make -j 16 | -0.52%
In 'netperf' testing, we tested TCP_STREAM with default socket size
16384 byte as large packet and 64 byte as small packet.
I used several clients to add networking pressure, then 'netperf' server
automatically generated several threads to response them.
I also used large-size packet and small-size packet in the testing.
Packet size | Thread number | performance gain
16384 bytes | 4 | 0.02%
16384 bytes | 8 | 2.21%
16384 bytes | 16 | 2.04%
64 bytes | 4 | 1.07%
64 bytes | 8 | 3.31%
64 bytes | 16 | 0.71%
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-8-git-send-email-alex.shi@intel.com
Tested-by: Ren, Yongjie <yongjie.ren@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
kernel will replace cr3 rewrite with invlpg when
tlb_flush_entries <= active_tlb_entries / 2^tlb_flushall_factor
if tlb_flushall_factor is -1, kernel won't do this replacement.
User can modify its value according to specific CPU/applications.
Thanks for Borislav providing the help message of
CONFIG_DEBUG_TLBFLUSH.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-6-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Testing show different CPU type(micro architectures and NUMA mode) has
different balance points between the TLB flush all and multiple invlpg.
And there also has cases the tlb flush change has no any help.
This patch give a interface to let x86 vendor developers have a chance
to set different shift for different CPU type.
like some machine in my hands, balance points is 16 entries on
Romely-EP; while it is at 8 entries on Bloomfield NHM-EP; and is 256 on
IVB mobile CPU. but on model 15 core2 Xeon using invlpg has nothing
help.
For untested machine, do a conservative optimization, same as NHM CPU.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-5-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
We don't need to flush large pages by PAGE_SIZE step, that just waste
time. and actually, large page don't need 'invlpg' optimizing according
to our micro benchmark. So, just flush whole TLB is enough for them.
The following result is tested on a 2CPU * 4cores * 2HT NHM EP machine,
with THP 'always' setting.
Multi-thread testing, '-t' paramter is thread number:
without this patch with this patch
./mprotect -t 1 14ns 13ns
./mprotect -t 2 13ns 13ns
./mprotect -t 4 12ns 11ns
./mprotect -t 8 14ns 10ns
./mprotect -t 16 28ns 28ns
./mprotect -t 32 54ns 52ns
./mprotect -t 128 200ns 200ns
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-4-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
x86 has no flush_tlb_range support in instruction level. Currently the
flush_tlb_range just implemented by flushing all page table. That is not
the best solution for all scenarios. In fact, if we just use 'invlpg' to
flush few lines from TLB, we can get the performance gain from later
remain TLB lines accessing.
But the 'invlpg' instruction costs much of time. Its execution time can
compete with cr3 rewriting, and even a bit more on SNB CPU.
So, on a 512 4KB TLB entries CPU, the balance points is at:
(512 - X) * 100ns(assumed TLB refill cost) =
X(TLB flush entries) * 100ns(assumed invlpg cost)
Here, X is 256, that is 1/2 of 512 entries.
But with the mysterious CPU pre-fetcher and page miss handler Unit, the
assumed TLB refill cost is far lower then 100ns in sequential access. And
2 HT siblings in one core makes the memory access more faster if they are
accessing the same memory. So, in the patch, I just do the change when
the target entries is less than 1/16 of whole active tlb entries.
Actually, I have no data support for the percentage '1/16', so any
suggestions are welcomed.
As to hugetlb, guess due to smaller page table, and smaller active TLB
entries, I didn't see benefit via my benchmark, so no optimizing now.
My micro benchmark show in ideal scenarios, the performance improves 70
percent in reading. And in worst scenario, the reading/writing
performance is similar with unpatched 3.4-rc4 kernel.
Here is the reading data on my 2P * 4cores *HT NHM EP machine, with THP
'always':
multi thread testing, '-t' paramter is thread number:
with patch unpatched 3.4-rc4
./mprotect -t 1 14ns 24ns
./mprotect -t 2 13ns 22ns
./mprotect -t 4 12ns 19ns
./mprotect -t 8 14ns 16ns
./mprotect -t 16 28ns 26ns
./mprotect -t 32 54ns 51ns
./mprotect -t 128 200ns 199ns
Single process with sequencial flushing and memory accessing:
with patch unpatched 3.4-rc4
./mprotect 7ns 11ns
./mprotect -p 4096 -l 8 -n 10240
21ns 21ns
[ hpa: http://lkml.kernel.org/r/1B4B44D9196EFF41AE41FDA404FC0A100BFF94@SHSMSX101.ccr.corp.intel.com
has additional performance numbers. ]
Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-3-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Fix kernel-doc warnings in arch/x86/mm/ioremap.c and
arch/x86/mm/pageattr.c, just like this one:
Warning(arch/x86/mm/ioremap.c:204):
No description found for parameter 'phys_addr'
Warning(arch/x86/mm/ioremap.c:204):
Excess function parameter 'offset' description in 'ioremap_nocache'
Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Link: http://lkml.kernel.org/r/1339296652-2935-1-git-send-email-liwp.linux@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Robin found this regression:
| I just tried to boot an 8TB system. It fails very early in boot with:
| Kernel panic - not syncing: Cannot find space for the kernel page tables
git bisect commit 722bc6b167.
A git revert of that commit does boot past that point on the 8TB
configuration.
That commit will add up extra pages for all memory range even
above 4g.
Try to limit that extra page count adding to first entry only.
Bisected-by: Robin Holt <holt@sgi.com>
Tested-by: Robin Holt <holt@sgi.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/CAE9FiQUj3wyzQxtq9yzBNc9u220p8JZ1FYHG7t%3DMOzJ%3D9BZMYA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When hot-adding a CPU, the system outputs following messages
since node_to_cpumask_map[2] was not allocated memory.
Booting Node 2 Processor 32 APIC 0xc0
node_to_cpumask_map[2] NULL
Pid: 0, comm: swapper/32 Tainted: G A 3.3.5-acd #21
Call Trace:
[<ffffffff81048845>] debug_cpumask_set_cpu+0x155/0x160
[<ffffffff8105e28a>] ? add_timer_on+0xaa/0x120
[<ffffffff8150665f>] numa_add_cpu+0x1e/0x22
[<ffffffff815020bb>] identify_cpu+0x1df/0x1e4
[<ffffffff815020d6>] identify_econdary_cpu+0x16/0x1d
[<ffffffff81504614>] smp_store_cpu_info+0x3c/0x3e
[<ffffffff81505263>] smp_callin+0x139/0x1be
[<ffffffff815052fb>] start_secondary+0x13/0xeb
The reason is that the bit of node 2 was not set at
numa_nodes_parsed. numa_nodes_parsed is set by only
acpi_numa_processor_affinity_init /
acpi_numa_x2apic_affinity_init. Thus even if hot-added memory
which is same PXM as hot-added CPU is written in ACPI SRAT
Table, if the hot-added CPU is not written in ACPI SRAT table,
numa_nodes_parsed is not set.
But according to ACPI Spec Rev 5.0, it says about ACPI SRAT
table as follows: This optional table provides information that
allows OSPM to associate processors and memory ranges, including
ranges of memory provided by hot-added memory devices, with
system localities / proximity domains and clock domains.
It means that ACPI SRAT table only provides information for CPUs
present at boot time and for memory including hot-added memory.
So hot-added memory is written in ACPI SRAT table, but hot-added
CPU is not written in it. Thus numa_nodes_parsed should be set
by not only acpi_numa_processor_affinity_init /
acpi_numa_x2apic_affinity_init but also
acpi_numa_memory_affinity_init for the case.
Additionally, if system has cpuless memory node,
acpi_numa_processor_affinity_init /
acpi_numa_x2apic_affinity_init cannot set numa_nodes_parseds
since these functions cannot find cpu description for the node.
In this case, numa_nodes_parsed needs to be set by
acpi_numa_memory_affinity_init.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: liuj97@gmail.com
Cc: kosaki.motohiro@gmail.com
Link: http://lkml.kernel.org/r/4FCC2098.4030007@jp.fujitsu.com
[ merged it ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Other than ix86, x86-64 on EFI so far didn't set the
{g,s}et_wallclock accessors to the EFI routines, thus
incorrectly using raw RTC accesses instead.
Simply removing the #ifdef around the respective code isn't
enough, however: While so far early get-time calls were done in
physical mode, this doesn't work properly for x86-64, as virtual
addresses would still need to be set up for all runtime regions
(which wasn't the case on the system I have access to), so
instead the patch moves the call to efi_enter_virtual_mode()
ahead (which in turn allows to drop all code related to calling
efi-get-time in physical mode).
Additionally the earlier calling of efi_set_executable()
requires the CPA code to cope, i.e. during early boot it must be
avoided to call cpa_flush_array(), as the first thing this
function does is a BUG_ON(irqs_disabled()).
Also make the two EFI functions in question here static -
they're not being referenced elsewhere.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4FBFBF5F020000780008637F@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Function pat_pagerange_is_ram() scales poorly to large address
ranges, because it probes the resource tree for each page.
On a 2.6 GHz Opteron, this function consumes 34 ms for a 1 GB range.
It is called twice during untrack_pfn_vma(), slowing process
cleanup and handicapping the OOM killer.
This replacement consumes less than 1ms, under the same conditions.
Signed-off-by: John Dykstra <jdykstra@cray.com> on behalf of Cray Inc.
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337980366.1979.6.camel@redwood
[ Small stylistic cleanups and renames ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull user namespace enhancements from Eric Biederman:
"This is a course correction for the user namespace, so that we can
reach an inexpensive, maintainable, and reasonably complete
implementation.
Highlights:
- Config guards make it impossible to enable the user namespace and
code that has not been converted to be user namespace safe.
- Use of the new kuid_t type ensures the if you somehow get past the
config guards the kernel will encounter type errors if you enable
user namespaces and attempt to compile in code whose permission
checks have not been updated to be user namespace safe.
- All uids from child user namespaces are mapped into the initial
user namespace before they are processed. Removing the need to add
an additional check to see if the user namespace of the compared
uids remains the same.
- With the user namespaces compiled out the performance is as good or
better than it is today.
- For most operations absolutely nothing changes performance or
operationally with the user namespace enabled.
- The worst case performance I could come up with was timing 1
billion cache cold stat operations with the user namespace code
enabled. This went from 156s to 164s on my laptop (or 156ns to
164ns per stat operation).
- (uid_t)-1 and (gid_t)-1 are reserved as an internal error value.
Most uid/gid setting system calls treat these value specially
anyway so attempting to use -1 as a uid would likely cause
entertaining failures in userspace.
- If setuid is called with a uid that can not be mapped setuid fails.
I have looked at sendmail, login, ssh and every other program I
could think of that would call setuid and they all check for and
handle the case where setuid fails.
- If stat or a similar system call is called from a context in which
we can not map a uid we lie and return overflowuid. The LFS
experience suggests not lying and returning an error code might be
better, but the historical precedent with uids is different and I
can not think of anything that would break by lying about a uid we
can't map.
- Capabilities are localized to the current user namespace making it
safe to give the initial user in a user namespace all capabilities.
My git tree covers all of the modifications needed to convert the core
kernel and enough changes to make a system bootable to runlevel 1."
Fix up trivial conflicts due to nearby independent changes in fs/stat.c
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
userns: Silence silly gcc warning.
cred: use correct cred accessor with regards to rcu read lock
userns: Convert the move_pages, and migrate_pages permission checks to use uid_eq
userns: Convert cgroup permission checks to use uid_eq
userns: Convert tmpfs to use kuid and kgid where appropriate
userns: Convert sysfs to use kgid/kuid where appropriate
userns: Convert sysctl permission checks to use kuid and kgids.
userns: Convert proc to use kuid/kgid where appropriate
userns: Convert ext4 to user kuid/kgid where appropriate
userns: Convert ext3 to use kuid/kgid where appropriate
userns: Convert ext2 to use kuid/kgid where appropriate.
userns: Convert devpts to use kuid/kgid where appropriate
userns: Convert binary formats to use kuid/kgid where appropriate
userns: Add negative depends on entries to avoid building code that is userns unsafe
userns: signal remove unnecessary map_cred_ns
userns: Teach inode_capable to understand inodes whose uids map to other namespaces.
userns: Fail exec for suid and sgid binaries with ids outside our user namespace.
userns: Convert stat to return values mapped from kuids and kgids
userns: Convert user specfied uids and gids in chown into kuids and kgid
userns: Use uid_eq gid_eq helpers when comparing kuids and kgids in the vfs
...
Pull x86 mm changes from Ingo Molnar:
"This tree includes a micro-optimization that avoids cr3 switches
during idling; it fixes corner cases and there's also small cleanups"
Fix up trivial context conflict with the percpu_xx -> this_cpu_xx
changes.
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-64: Fix accounting in kernel_physical_mapping_init()
x86/tlb: Clean up and unify TLB_FLUSH_ALL definition
x86: Drop obsolete ARCH_BOOTMEM support
x86, tlb: Switch cr3 in leave_mm() only when needed
x86/mm: Fix the size calculation of mapping tables
Pull exception table generation updates from Ingo Molnar:
"The biggest change here is to allow the build-time sorting of the
exception table, to speed up booting. This is achieved by the
architecture enabling BUILDTIME_EXTABLE_SORT. This option is enabled
for x86 and MIPS currently.
On x86 a number of fixes and changes were needed to allow build-time
sorting of the exception table, in particular a relocation invariant
exception table format was needed. This required the abstracting out
of exception table protocol and the removal of 20 years of accumulated
assumptions about the x86 exception table format.
While at it, this tree also cleans up various other aspects of
exception handling, such as early(er) exception handling for
rdmsr_safe() et al.
All in one, as the result of these changes the x86 exception code is
now pretty nice and modern. As an added bonus any regressions in this
code will be early and violent crashes, so if you see any of those,
you'll know whom to blame!"
Fix up trivial conflicts in arch/{mips,x86}/Kconfig files due to nearby
modifications of other core architecture options.
* 'x86-extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
Revert "x86, extable: Disable presorted exception table for now"
scripts/sortextable: Handle relative entries, and other cleanups
x86, extable: Switch to relative exception table entries
x86, extable: Disable presorted exception table for now
x86, extable: Add _ASM_EXTABLE_EX() macro
x86, extable: Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S
x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/xsave.h
x86, extable: Remove open-coded exception table entries in arch/x86/include/asm/kvm_host.h
x86, extable: Remove the now-unused __ASM_EX_SEC macros
x86, extable: Remove open-coded exception table entries in arch/x86/xen/xen-asm_32.S
x86, extable: Remove open-coded exception table entries in arch/x86/um/checksum_32.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/usercopy_32.c
x86, extable: Remove open-coded exception table entries in arch/x86/lib/putuser.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/getuser.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/csum-copy_64.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_nocache_64.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/copy_user_64.S
x86, extable: Remove open-coded exception table entries in arch/x86/lib/checksum_32.S
x86, extable: Remove open-coded exception table entries in arch/x86/kernel/test_rodata.c
x86, extable: Remove open-coded exception table entries in arch/x86/kernel/entry_64.S
...
Pull scheduler changes from Ingo Molnar:
"The biggest change is the cleanup/simplification of the load-balancer:
instead of the current practice of architectures twiddling scheduler
internal data structures and providing the scheduler domains in
colorfully inconsistent ways, we now have generic scheduler code in
kernel/sched/core.c:sched_init_numa() that looks at the architecture's
node_distance() parameters and (while not fully trusting it) deducts a
NUMA topology from it.
This inevitably changes balancing behavior - hopefully for the better.
There are various smaller optimizations, cleanups and fixlets as well"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Taint kernel with TAINT_WARN after sleep-in-atomic bug
sched: Remove stale power aware scheduling remnants and dysfunctional knobs
sched/debug: Fix printing large integers on 32-bit platforms
sched/fair: Improve the ->group_imb logic
sched/nohz: Fix rq->cpu_load[] calculations
sched/numa: Don't scale the imbalance
sched/fair: Revert sched-domain iteration breakage
sched/x86: Rewrite set_cpu_sibling_map()
sched/numa: Fix the new NUMA topology bits
sched/numa: Rewrite the CONFIG_NUMA sched domain support
sched/fair: Propagate 'struct lb_env' usage into find_busiest_group
sched/fair: Add some serialization to the sched_domain load-balance walk
sched/fair: Let minimally loaded cpu balance the group
sched: Change rq->nr_running to unsigned int
x86/numa: Check for nonsensical topologies on real hw as well
x86/numa: Hard partition cpu topology masks on node boundaries
x86/numa: Allow specifying node_distance() for numa=fake
x86/sched: Make mwait_usable() heed to "idle=" kernel parameters properly
sched: Update documentation and comments
sched_rt: Avoid unnecessary dequeue and enqueue of pushable tasks in set_cpus_allowed_rt()
When finding a present and acceptable 2M/1G mapping, the number
of pages mapped this way shouldn't be incremented (as it was
already incremented when the earlier part of the mapping was
established). Instead, last_map_addr needs to be updated in this
case.
Further, address increments were wrong in one place each in both
phys_pmd_init() and phys_pud_init() (lacking the aligning down
to the respective page boundary).
As we're now doing the same calculation several times, fold it
into a single instance using a local variable (matching how
kernel_physical_mapping_init() itself does it at the PGD level).
Observed during code inspection, not because of an actual
problem.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4FB3C27202000078000841A0@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since percpu_xxx() serial functions are duplicated with this_cpu_xxx().
Removing percpu_xxx() definition and replacing them by this_cpu_xxx()
in code. There is no function change in this patch, just preparation for
later percpu_xxx serial function removing.
On x86 machine the this_cpu_xxx() serial functions are same as
__this_cpu_xxx() without no unnecessary premmpt enable/disable.
Thanks for Stephen Rothwell, he found and fixed a i386 build error in
the patch.
Also thanks for Andrew Morton, he kept updating the patchset in Linus'
tree.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Acked-by: Christoph Lameter <cl@gentwo.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Allows emulating more interesting NUMA configurations like a quad
socket AMD Magny-Cour:
"numa=fake=8:10,16,16,22,16,22,16,22,
16,10,22,16,22,16,22,16,
16,22,10,16,16,22,16,22,
22,16,16,10,22,16,22,16,
16,22,16,22,10,16,16,22,
22,16,22,16,16,10,22,16,
16,22,16,22,16,22,10,16,
22,16,22,16,22,16,16,10"
Which has a non-fully-connected topology.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/n/tip-e1136ef7kdffj7yf9tjhydln@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cred.h and a few trivial users of struct cred are changed. The rest of the users
of struct cred are left for other patches as there are too many changes to make
in one go and leave the change reviewable. If the user namespace is disabled and
CONFIG_UIDGID_STRICT_TYPE_CHECKS are disabled the code will contiue to compile
and behave correctly.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Switch to using relative exception table entries on x86. On i386,
this has the advantage that the exception table entries don't need to
be relocated; on x86-64 this means the exception table entries take up
only half the space.
In either case, a 32-bit delta is sufficient, as the range of kernel
code addresses is limited.
Since part of the goal is to avoid needing to adjust the entries when
the kernel is relocated, the old trick of using addresses in the NULL
pointer range to indicate uaccess_err no longer works (and unlike RISC
architectures we can't use a flag bit); instead use an delta just
below +2G to indicate these special entries. The reach is still
limited to a single instruction.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: David Daney <david.daney@cavium.com>
Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
Add a restricted version of fixup_exception() to be used during early
boot only. In particular, this doesn't support the try..catch variant
since we may not have a thread_info set up yet.
This relies on the exception table being sorted already at build time.
Link: http://lkml.kernel.org/r/1334794610-5546-1-git-send-email-hpa@zytor.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull x86 cleanups from Peter Anvin:
"The biggest textual change is the cleanup to use symbolic constants
for x86 trap values.
The only *functional* change and the reason for the x86/x32 dependency
is the move of is_ia32_task() into <asm/thread_info.h> so that it can
be used in other code that needs to understand if a system call comes
from the compat entry point (and therefore uses i386 system call
numbers) or not. One intended user for that is the BPF system call
filter. Moving it out of <asm/compat.h> means we can define it
unconditionally, returning always true on i386."
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Move is_ia32_task to asm/thread_info.h from asm/compat.h
x86: Rename trap_no to trap_nr in thread_struct
x86: Use enum instead of literals for trap values
Pull x86 updates from Ingo Molnar.
This touches some non-x86 files due to the sanitized INLINE_SPIN_UNLOCK
config usage.
Fixed up trivial conflicts due to just header include changes (removing
headers due to cpu_idle() merge clashing with the <asm/system.h> split).
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/amd: Be more verbose about LVT offset assignments
x86, tls: Off by one limit check
x86/ioapic: Add io_apic_ops driver layer to allow interception
x86/olpc: Add debugfs interface for EC commands
x86: Merge the x86_32 and x86_64 cpu_idle() functions
x86/kconfig: Remove CONFIG_TR=y from the defconfigs
x86: Stop recursive fault in print_context_stack after stack overflow
x86/io_apic: Move and reenable irq only when CONFIG_GENERIC_PENDING_IRQ=y
x86/apic: Add separate apic_id_valid() functions for selected apic drivers
locking/kconfig: Simplify INLINE_SPIN_UNLOCK usage
x86/kconfig: Update defconfigs
x86: Fix excessive MSR print out when show_msr is not specified
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
/5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
NypQthI85pc=
=G9mT
-----END PGP SIGNATURE-----
Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system
Pull "Disintegrate and delete asm/system.h" from David Howells:
"Here are a bunch of patches to disintegrate asm/system.h into a set of
separate bits to relieve the problem of circular inclusion
dependencies.
I've built all the working defconfigs from all the arches that I can
and made sure that they don't break.
The reason for these patches is that I recently encountered a circular
dependency problem that came about when I produced some patches to
optimise get_order() by rewriting it to use ilog2().
This uses bitops - and on the SH arch asm/bitops.h drags in
asm-generic/get_order.h by a circuituous route involving asm/system.h.
The main difficulty seems to be asm/system.h. It holds a number of
low level bits with no/few dependencies that are commonly used (eg.
memory barriers) and a number of bits with more dependencies that
aren't used in many places (eg. switch_to()).
These patches break asm/system.h up into the following core pieces:
(1) asm/barrier.h
Move memory barriers here. This already done for MIPS and Alpha.
(2) asm/switch_to.h
Move switch_to() and related stuff here.
(3) asm/exec.h
Move arch_align_stack() here. Other process execution related bits
could perhaps go here from asm/processor.h.
(4) asm/cmpxchg.h
Move xchg() and cmpxchg() here as they're full word atomic ops and
frequently used by atomic_xchg() and atomic_cmpxchg().
(5) asm/bug.h
Move die() and related bits.
(6) asm/auxvec.h
Move AT_VECTOR_SIZE_ARCH here.
Other arch headers are created as needed on a per-arch basis."
Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that. We'll find out anything that got broken and fix it..
* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
Delete all instances of asm/system.h
Remove all #inclusions of asm/system.h
Add #includes needed to permit the removal of asm/system.h
Move all declarations of free_initmem() to linux/mm.h
Disintegrate asm/system.h for OpenRISC
Split arch_align_stack() out from asm-generic/system.h
Split the switch_to() wrapper out of asm-generic/system.h
Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
Create asm-generic/barrier.h
Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
Disintegrate asm/system.h for Xtensa
Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
Disintegrate asm/system.h for Tile
Disintegrate asm/system.h for Sparc
Disintegrate asm/system.h for SH
Disintegrate asm/system.h for Score
Disintegrate asm/system.h for S390
Disintegrate asm/system.h for PowerPC
Disintegrate asm/system.h for PA-RISC
Disintegrate asm/system.h for MN10300
...
"[RFC - PATCH 0/7] consolidation of BUG support code."
https://lkml.org/lkml/2012/1/26/525
--
The changes shown here are to unify linux's BUG support under
the one <linux/bug.h> file. Due to historical reasons, we have
some BUG code in bug.h and some in kernel.h -- i.e. the support for
BUILD_BUG in linux/kernel.h predates the addition of linux/bug.h,
but old code in kernel.h wasn't moved to bug.h at that time. As
a band-aid, kernel.h was including <asm/bug.h> to pseudo link them.
This has caused confusion[1] and general yuck/WTF[2] reactions.
Here is an example that violates the principle of least surprise:
CC lib/string.o
lib/string.c: In function 'strlcat':
lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON'
make[2]: *** [lib/string.o] Error 1
$
$ grep linux/bug.h lib/string.c
#include <linux/bug.h>
$
We've included <linux/bug.h> for the BUG infrastructure and yet we
still get a compile fail! [We've not kernel.h for BUILD_BUG_ON.]
Ugh - very confusing for someone who is new to kernel development.
With the above in mind, the goals of this changeset are:
1) find and fix any include/*.h files that were relying on the
implicit presence of BUG code.
2) find and fix any C files that were consuming kernel.h and
hence relying on implicitly getting some/all BUG code.
3) Move the BUG related code living in kernel.h to <linux/bug.h>
4) remove the asm/bug.h from kernel.h to finally break the chain.
During development, the order was more like 3-4, build-test, 1-2.
But to ensure that git history for bisect doesn't get needless
build failures introduced, the commits have been reorderd to fix
the problem areas in advance.
[1] https://lkml.org/lkml/2012/1/3/90
[2] https://lkml.org/lkml/2012/1/17/414
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=PYQT
-----END PGP SIGNATURE-----
Merge tag 'bug-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull <linux/bug.h> cleanup from Paul Gortmaker:
"The changes shown here are to unify linux's BUG support under the one
<linux/bug.h> file. Due to historical reasons, we have some BUG code
in bug.h and some in kernel.h -- i.e. the support for BUILD_BUG in
linux/kernel.h predates the addition of linux/bug.h, but old code in
kernel.h wasn't moved to bug.h at that time. As a band-aid, kernel.h
was including <asm/bug.h> to pseudo link them.
This has caused confusion[1] and general yuck/WTF[2] reactions. Here
is an example that violates the principle of least surprise:
CC lib/string.o
lib/string.c: In function 'strlcat':
lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON'
make[2]: *** [lib/string.o] Error 1
$
$ grep linux/bug.h lib/string.c
#include <linux/bug.h>
$
We've included <linux/bug.h> for the BUG infrastructure and yet we
still get a compile fail! [We've not kernel.h for BUILD_BUG_ON.] Ugh -
very confusing for someone who is new to kernel development.
With the above in mind, the goals of this changeset are:
1) find and fix any include/*.h files that were relying on the
implicit presence of BUG code.
2) find and fix any C files that were consuming kernel.h and hence
relying on implicitly getting some/all BUG code.
3) Move the BUG related code living in kernel.h to <linux/bug.h>
4) remove the asm/bug.h from kernel.h to finally break the chain.
During development, the order was more like 3-4, build-test, 1-2. But
to ensure that git history for bisect doesn't get needless build
failures introduced, the commits have been reorderd to fix the problem
areas in advance.
[1] https://lkml.org/lkml/2012/1/3/90
[2] https://lkml.org/lkml/2012/1/17/414"
Fix up conflicts (new radeon file, reiserfs header cleanups) as per Paul
and linux-next.
* tag 'bug-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
kernel.h: doesn't explicitly use bug.h, so don't include it.
bug: consolidate BUILD_BUG_ON with other bug code
BUG: headers with BUG/BUG_ON etc. need linux/bug.h
bug.h: add include of it to various implicit C users
lib: fix implicit users of kernel.h for TAINT_WARN
spinlock: macroize assert_spin_locked to avoid bug.h dependency
x86: relocate get/set debugreg fcns to include/asm/debugreg.
As suggested by Suresh Siddha and Yinghai Lu:
For x2apic pre-enabled systems, apic driver is set already early
through early_acpi_boot_init()/early_acpi_process_madt()/
acpi_parse_madt()/default_acpi_madt_oem_check() path so that
apic_id_valid() checking will be sufficient during MADT and SRAT
parsing.
For non-x2apic pre-enabled systems, all apic ids should be less
than 255.
This allows us to substitute the checks in
arch/x86/kernel/acpi/boot.c::acpi_parse_x2apic() and
arch/x86/mm/srat.c::acpi_numa_x2apic_affinity_init() with
apic->apic_id_valid().
In addition we can avoid feigning the x2apic cpu feature in the
NumaChip apic code.
The following apic drivers have separate apic_id_valid()
functions which will accept x2apic type IDs :
x2apic_phys
x2apic_cluster
x2apic_uv_x
apic_numachip
Signed-off-by: Steffen Persvold <sp@numascale.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Daniel J Blueman <daniel@numascale-asia.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/1331925935-13372-1-git-send-email-sp@numascale.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently leave_mm() unconditionally switches the cr3 to swapper_pg_dir.
But there is no need to change the cr3, if we already left that mm.
intel_idle() for example calls leave_mm() on every deep c-state entry where
the CPU flushes the TLB for us. Similarly flush_tlb_all() was also calling
leave_mm() whenever the TLB is in LAZY state. Both these paths will be
improved with this change.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1332460885.16101.147.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Pull x86 "urgent" leftovers from Ingo Molnar:
"Pending x86/urgent bits that were not high prio enough to warrant
-rc-less v3.3-final inclusion."
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, efi: Fix pointer math issue in handle_ramdisks()
x86/ioapic: Add register level checks to detect bogus io-apic entries
x86, mce: Fix rcu splat in drain_mce_log_buffer()
x86, memblock: Move mem_hole_size() to .init
Without this fix the cpumask_of_node() for a fake=numa=2 is:
cpumask 0 ff
cpumask 1 ff
with the fix it's correct and it's set to:
cpumask 0 55
cpumask 1 aa
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After looking up the vma which covers or follows the cached search
address, the following condition is always true:
!prev_vma || (addr >= prev_vma->vm_end)
so we can stop checking the previous VMA altogether.
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Search again only if some holes may be skipped in the first pass.
[akpm@linux-foundation.org: clean up crazy compound definition]
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
There are precedences of trap number being referred to as
trap_nr. However thread struct refers trap number as trap_no.
Change it to trap_nr.
Also use enum instead of left-over literals for trap values.
This is pure cleanup, no functional change intended.
Suggested-by: Ingo Molnar <mingo@eltu.hu>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linux-mm <linux-mm@kvack.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120312092555.5379.942.sendpatchset@srdronam.in.ibm.com
[ Fixed the math-emu build ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It turns out that test-compiling this file on x86-64 doesn't really
help, because much of it is x86-32-specific. And so I hadn't noticed
the slightly over-eager removal of the 'r' from 'addr' variable despite
thinking I had tested it.
Signed-off-by: Linus "oopsie" Torvalds <torvalds@linux-foundation.org>
Several users of "find_vma_prev()" were not in fact interested in the
previous vma if there was no primary vma to be found either. And in
those cases, we're much better off just using the regular "find_vma()",
and then "prev" can be looked up by just checking vma->vm_prev.
The find_vma_prev() semantics are fairly subtle (see Mikulas' recent
commit 83cd904d27: "mm: fix find_vma_prev"), and the whole "return
prev by reference" means that it generates worse code too.
Thus this "let's avoid using this inconvenient and clearly too subtle
interface when we don't really have to" patch.
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For machines that enable PSE, the first 2/4M memory region still uses
4K pages, so needs more PTEs in this case, but
find_early_table_space() doesn't count this.
This patch fixes it.
The bug was found via code review, no misbehavior of the kernel
was observed.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <ianfang.cn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-kq6a00qe33h7c7ais2xsywnh@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
mem_hole_size() is being called only from __init-marked functions, and as
such should be moved to .init section as well. Fixes this warning:
WARNING: vmlinux.o(.text+0x35511): Section mismatch in reference from the function mem_hole_size() to the function .init.text:absent_pages_in_range()
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1202281614450.31150@pobox.suse.cz
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
With bug.h currently living right in linux/kernel.h there
are files that use BUG_ON and friends but are not including
the header explicitly. Fix them up so we can remove the
presence in kernel.h file.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bugs, x86: Fix printk levels for panic, softlockups and stack dumps
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf top: Fix number of samples displayed
perf tools: Fix strlen() bug in perf_event__synthesize_event_type()
perf tools: Fix broken build by defining _GNU_SOURCE in Makefile
x86/dumpstack: Remove unneeded check in dump_trace()
perf: Fix broken interrupt rate throttling
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Fix task stack corruption under __ARCH_WANT_INTERRUPTS_ON_CTXSW
sched: Fix ancient race in do_exit()
sched/nohz: Fix nohz cpu idle load balancing state with cpu hotplug
sched/s390: Fix compile error in sched/core.c
sched: Fix rq->nr_uninterruptible update race
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/reboot: Remove VersaLogic Menlow reboot quirk
x86/reboot: Skip DMI checks if reboot set by user
x86: Properly parenthesize cmpxchg() macro arguments
rsyslog will display KERN_EMERG messages on a connected
terminal. However, these messages are useless/undecipherable
for a general user.
For example, after a softlockup we get:
Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
kernel:Stack:
Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
kernel:Call Trace:
Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89
d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 <e8> ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89
This happens because the printk levels for these messages are
incorrect. Only an informational message should be displayed on
a terminal.
I modified the printk levels for various messages in the kernel
and tested the output by using the drivers/misc/lkdtm.c kernel
modules (ie, softlockups, panics, hard lockups, etc.) and
confirmed that the console output was still the same and that
the output to the terminals was correct.
For example, in the case of a softlockup we now see the much
more informative:
Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ...
BUG: soft lockup - CPU4 stuck for 60s!
instead of the above confusing messages.
AFAICT, the messages no longer have to be KERN_EMERG. In the
most important case of a panic we set console_verbose(). As for
the other less severe cases the correct data is output to the
console and /var/log/messages.
Successfully tested by me using the drivers/misc/lkdtm.c module.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: dzickus@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.
APEI has patches resulting from testing on real hardware.
Plus other random fixes.
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
intel_idle: Split up and provide per CPU initialization func
ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
ACPI processor: Remove unneeded cpuidle_unregister_driver call
intel idle: Make idle driver more robust
intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
intel_idle: remove redundant local_irq_disable() call
ACPI processor: Fix error path, also remove sysdev link
ACPI: processor: fix acpi_get_cpuid for UP processor
intel_idle: fix API misuse
ACPI APEI: Convert atomicio routines
ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
ACPI: Fix possible alignment issues with GAS 'address' references
ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
ACPI: Store SRAT table revision
ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
ACPI, Record ACPI NVS regions
ACPI, APEI, EINJ, Refine the fix of resource conflict
...
In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides
32bits for these. The new fields were reserved before.
According to the ACPI spec, the OS must disregrard reserved fields.
x86/x86-64 was rather inconsistent prior to this patch; it used 8 bits
for the pxm field in cpu_affinity, but 32 bits in mem_affinity.
This patch makes it consistent: Either use 8 bits consistently (SRAT
rev 1 or lower) or 32 bits (SRAT rev 2 or higher).
cc: x86@kernel.org
Signed-off-by: Kurt Garloff <kurt@garloff.de>
Signed-off-by: Len Brown <len.brown@intel.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=HHrh
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://github.com/rustyrussell/linux
Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1
* tag 'for-linus' of git://github.com/rustyrussell/linux:
module_param: check that bool parameters really are bool.
intelfbdrv.c: bailearly is an int module_param
paride/pcd: fix bool verbose module parameter.
module_param: make bool parameters really bool (drivers & misc)
module_param: make bool parameters really bool (arch)
module_param: make bool parameters really bool (core code)
kernel/async: remove redundant declaration.
printk: fix unnecessary module_param_name.
lirc_parallel: fix module parameter description.
module_param: avoid bool abuse, add bint for special cases.
module_param: check type correctness for module_param_array
modpost: use linker section to generate table.
modpost: use a table rather than a giant if/else statement.
modules: sysfs - export: taint, coresize, initsize
kernel/params: replace DEBUGP with pr_debug
module: replace DEBUGP with pr_debug
module: struct module_ref should contains long fields
module: Fix performance regression on modules with large symbol tables
module: Add comments describing how the "strmap" logic works
Fix up conflicts in scripts/mod/file2alias.c due to the new linker-
generated table approach to adding __mod_*_device_table entries. The
ARM sa11x0 mcp bus needed to be converted to that too.
node_to_cpumask() has been replaced by cpumask_of_node(), and wholly
removed since commit 29c337a0 ("cpumask: remove obsolete node_to_cpumask
now everyone uses cpumask_of_node").
So update the comments for setup_node_to_cpumask_map().
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/numa: Add constraints check for nid parameters
mm, x86: Remove debug_pagealloc_enabled
x86/mm: Initialize high mem before free_all_bootmem()
arch/x86/kernel/e820.c: quiet sparse noise about plain integer as NULL pointer
arch/x86/kernel/e820.c: Eliminate bubble sort from sanitize_e820_map()
x86: Fix mmap random address range
x86, mm: Unify zone_sizes_init()
x86, mm: Prepare zone_sizes_init() for unification
x86, mm: Use max_low_pfn for ZONE_NORMAL on 64-bit
x86, mm: Wrap ZONE_DMA32 with CONFIG_ZONE_DMA32
x86, mm: Use max_pfn instead of highend_pfn
x86, mm: Move zone init from paging_init() on 64-bit
x86, mm: Use MAX_DMA_PFN for ZONE_DMA on 32-bit
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Use "do { } while(0)" for empty lock_cmos()/unlock_cmos() macros
x86: Use "do { } while(0)" for empty flush_tlb_fix_spurious_fault() macro
x86, CPU: Drop superfluous get_cpu_cap() prototype
arch/x86/mm/pageattr.c: Quiet sparse noise; local functions should be static
arch/x86/kernel/ptrace.c: Quiet sparse noise
x86: Use kmemdup() in copy_thread(), rather than duplicating its implementation
x86: Replace the EVT_TO_HPET_DEV() macro with an inline function
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86: Fix atomic64_xxx_cx8() functions
x86: Fix and improve cmpxchg_double{,_local}()
x86_64, asm: Optimise fls(), ffs() and fls64()
x86, bitops: Move fls64.h inside __KERNEL__
x86: Fix and improve percpu_cmpxchg{8,16}b_double()
x86: Report cpb and eff_freq_ro flags correctly
x86/i386: Use less assembly in strlen(), speed things up a bit
x86: Use the same node_distance for 32 and 64-bit
x86: Fix rflags in FAKE_STACK_FRAME
x86: Clean up and extend do_int3()
x86: Call do_notify_resume() with interrupts enabled
x86/div64: Add a micro-optimization shortcut if base is power of two
x86-64: Cleanup some assembly entry points
x86-64: Slightly shorten line system call entry and exit paths
x86-64: Reduce amount of redundant code generated for invalidate_interruptNN
x86-64: Slightly shorten int_ret_from_sys_call
x86, efi: Convert efi_phys_get_time() args to physical addresses
x86: Default to vsyscall=emulate
x86-64: Set siginfo and context on vsyscall emulation faults
x86: consolidate xchg and xadd macros
...
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Skip cpus with apic-ids >= 255 in !x2apic_mode
x86, x2apic: Allow "nox2apic" to disable x2apic mode setup by BIOS
x86, x2apic: Fallback to xapic when BIOS doesn't setup interrupt-remapping
x86, acpi: Skip acpi x2apic entries if the x2apic feature is not present
x86, apic: Add probe() for apic_flat
x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86'
x86: Convert per-cpu counter icr_read_retry_count into a member of irq_stat
x86: Add per-cpu stat counter for APIC ICR read tries
pci, x86/io-apic: Allow PCI_IOAPIC to be user configurable on x86
x86: Fix the !CONFIG_NUMA build of the new CPU ID fixup code support
x86: Add NumaChip support
x86: Add x86_init platform override to fix up NUMA core numbering
x86: Make flat_init_apic_ldr() available
If the x2apic feature is not present (either the cpu is not capable of it
or the user has disabled the feature using boot-parameter etc), ignore the
x2apic MADT and SRAT entries provided by the ACPI tables.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20111222014632.540896503@sbsiddha-desk.sc.intel.com
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
With the 3.2-rc kernel, IOMMU 2M pages in KVM works. But when I tried
to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page
failed to be used.
The root cause is that 1GB page allocation calls gup_huge_pud() while 2M
page calls gup_huge_pmd. If compound pages are used and the page is a
tail page, gup_huge_pmd() increases _mapcount to record tail page are
mapped while gup_huge_pud does not do that.
So when the mapped page is relesed, it will result in kernel oops
because the page is not marked mapped.
This patch add tail process for compound page in 1GB huge page which
keeps the same process as 2M page.
Reproduce like:
1. Add grub boot option: hugepagesz=1G hugepages=8
2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages
3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages
-net none -device pci-assign,host=07:00.1
kernel BUG at mm/swap.c:114!
invalid opcode: 0000 [#1] SMP
Call Trace:
put_page+0x15/0x37
kvm_release_pfn_clean+0x31/0x36
kvm_iommu_put_pages+0x94/0xb1
kvm_iommu_unmap_memslots+0x80/0xb6
kvm_assign_device+0xba/0x117
kvm_vm_ioctl_assigned_device+0x301/0xa47
kvm_vm_ioctl+0x36c/0x3a2
do_vfs_ioctl+0x49e/0x4e4
sys_ioctl+0x5a/0x7c
system_call_fastpath+0x16/0x1b
RIP put_compound_page+0xd4/0x168
Signed-off-by: Youquan Song <youquan.song@intel.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds constraint checks to the numa_set_distance()
function.
When the check triggers (this should not happen normally) it
emits a warning and avoids a store to a negative index in
numa_distance[] array - i.e. avoids memory corruption.
Negative ids can be passed when the pxm-to-nids mapping is not
properly filled while parsing the SRAT.
Signed-off-by: Petr Holasek <pholasek@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Anton Arapov <anton@redhat.com>
Link: http://lkml.kernel.org/r/20111208121640.GA2229@dhcp-27-244.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When (no)bootmem finish operation, it pass pages to buddy
allocator. Since debug_pagealloc_enabled is not set, we will do
not protect pages, what is not what we want with
CONFIG_DEBUG_PAGEALLOC=y.
To fix remove debug_pagealloc_enabled. That variable was
introduced by commit 12d6f21e "x86: do not PSE on
CONFIG_DEBUG_PAGEALLOC=y" to get more CPA (change page
attribude) code testing. But currently we have CONFIG_CPA_DEBUG,
which test CPA.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1322582711-14571-1-git-send-email-sgruszka@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Patch fixes a boot crash with pagealloc debugging enabled:
Initializing HighMem for node 0 (000377fe:0003fff0)
BUG: unable to handle kernel paging request at f6fefe80
IP: [<c1621ab5>] find_range_array+0x5e/0x69
[...]
Call Trace:
[<c1622064>] __get_free_all_memory_range+0x39/0xb4
[<c1620dd0>] add_highpages_with_active_regions+0x18/0x9b
[<c1621a2e>] set_highmem_pages_init+0x70/0x90
[<c162122b>] mem_init+0x50/0x21b
[<c16155bd>] start_kernel+0x1bf/0x31c
[<c1615065>] i386_start_kernel+0x65/0x67
The crash happens when memblock wants to allocate big area for
temporary "struct range" array and reuses pages from top of low
memory, which were already passed to the buddy allocator.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: linux-mm@kvack.org
Cc: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/20111206080833.GB3105@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Local functions should be marked static. This also quiets the
following sparse noise:
warning: symbol '_set_memory_array' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: hartleys@visionengravers.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On x86_32 casting the unsigned int result of get_random_int() to
long may result in a negative value. On x86_32 the range of
mmap_rnd() therefore was -255 to 255. The 32bit mode on x86_64
used 0 to 255 as intended.
The bug was introduced by 675a081 ("x86: unify mmap_{32|64}.c")
in January 2008.
Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: harvey.harrison@gmail.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/201111152246.pAFMklOB028527@wpaz5.hot.corp.google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix an outstanding issue that has been reported since 2.6.37.
Under a heavy loaded machine processing "fork()" calls could
crash with:
BUG: unable to handle kernel paging request at f573fc8c
IP: [<c01abc54>] swap_count_continued+0x104/0x180
*pdpt = 000000002a3b9027 *pde = 0000000001bed067 *pte = 0000000000000000 Oops: 0000 [#1] SMP
Modules linked in:
Pid: 1638, comm: apache2 Not tainted 3.0.4-linode37 #1
EIP: 0061:[<c01abc54>] EFLAGS: 00210246 CPU: 3
EIP is at swap_count_continued+0x104/0x180
.. snip..
Call Trace:
[<c01ac222>] ? __swap_duplicate+0xc2/0x160
[<c01040f7>] ? pte_mfn_to_pfn+0x87/0xe0
[<c01ac2e4>] ? swap_duplicate+0x14/0x40
[<c01a0a6b>] ? copy_pte_range+0x45b/0x500
[<c01a0ca5>] ? copy_page_range+0x195/0x200
[<c01328c6>] ? dup_mmap+0x1c6/0x2c0
[<c0132cf8>] ? dup_mm+0xa8/0x130
[<c013376a>] ? copy_process+0x98a/0xb30
[<c013395f>] ? do_fork+0x4f/0x280
[<c01573b3>] ? getnstimeofday+0x43/0x100
[<c010f770>] ? sys_clone+0x30/0x40
[<c06c048d>] ? ptregs_clone+0x15/0x48
[<c06bfb71>] ? syscall_call+0x7/0xb
The problem is that in copy_page_range() we turn lazy mode on,
and then in swap_entry_free() we call swap_count_continued()
which ends up in:
map = kmap_atomic(page, KM_USER0) + offset;
and then later we touch *map.
Since we are running in batched mode (lazy) we don't actually
set up the PTE mappings and the kmap_atomic is not done
synchronously and ends up trying to dereference a page that has
not been set.
Looking at kmap_atomic_prot_pfn(), it uses
'arch_flush_lazy_mmu_mode' and doing the same in
kmap_atomic_prot() and __kunmap_atomic() makes the problem go
away.
Interestingly, commit b8bcfe997e ("x86/paravirt: remove lazy
mode in interrupts") removed part of this to fix an interrupt
issue - but it went to far and did not consider this scenario.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To make this work, we teach the page fault handler how to send
signals on failed uaccess. This only works for user addresses
(kernel addresses will never hit the page fault handler in the
first place), so we need to generate signals for those
separately.
This gets the tricky case right: if the user buffer spans
multiple pages and only the second page is invalid, we set
cr2 and si_addr correctly. UML relies on this behavior to
"fault in" pages as needed.
We steal a bit from thread_info.uaccess_err to enable this.
Before this change, uaccess_err was a 32-bit boolean value.
This fixes issues with UML when vsyscall=emulate.
Reported-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: richard -rw- weinberger <richard.weinberger@gmail.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/4c8f91de7ec5cd2ef0f59521a04e1015f11e42b4.1320712291.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts & resolutions:
* arch/x86/xen/setup.c
dc91c728fd "xen: allow extra memory to be in multiple regions"
24aa07882b "memblock, x86: Replace memblock_x86_reserve/free..."
conflicted on xen_add_extra_mem() updates. The resolution is
trivial as the latter just want to replace
memblock_x86_reserve_range() with memblock_reserve().
* drivers/pci/intel-iommu.c
166e9278a3 "x86/ia64: intel-iommu: move to drivers/iommu/"
5dfe8660a3 "bootmem: Replace work_with_active_regions() with..."
conflicted as the former moved the file under drivers/iommu/.
Resolved by applying the chnages from the latter on the moved
file.
* mm/Kconfig
6661672053 "memblock: add NO_BOOTMEM config symbol"
c378ddd53f "memblock, x86: Make ARCH_DISCARD_MEMBLOCK a config option"
conflicted trivially. Both added config options. Just
letting both add their own options resolves the conflict.
* mm/memblock.c
d1f0ece6cd "mm/memblock.c: small function definition fixes"
ed7b56a799 "memblock: Remove memblock_memory_can_coalesce()"
confliected. The former updates function removed by the
latter. Resolution is trivial.
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that zone_sizes_init() is identical on 32-bit and 64-bit,
move the code to arch/x86/mm/init.c and use it for both
architectures.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1320155902-10424-7-git-send-email-penberg@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make 32-bit and 64-bit zone_sizes_init() identical in
preparation for unification.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1320155902-10424-6-git-send-email-penberg@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
64-bit has no highmem so max_low_pfn is always the same as
'max_pfn'.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1320155902-10424-5-git-send-email-penberg@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In preparation for unifying 32-bit and 64-bit zone_sizes_init()
make sure ZONE_DMA32 is wrapped in CONFIG_ZONE_DMA32.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1320155902-10424-4-git-send-email-penberg@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The 'highend_pfn' variable is always set to 'max_pfn' so just
use the latter directly.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1320155902-10424-3-git-send-email-penberg@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch introduces a zone_sizes_init() helper function on
64-bit to make it more similar to 32-bit init.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1320155902-10424-2-git-send-email-penberg@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use MAX_DMA_PFN which represents the 16 MB ISA DMA limit on
32-bit x86 just like we do on 64-bit.
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1320155902-10424-1-git-send-email-penberg@kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This avoids duplicating the function in every arch gup_fast.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michel while working on the working set estimation code, noticed that
calling get_page_unless_zero() on a random pfn_to_page(random_pfn)
wasn't safe, if the pfn ended up being a tail page of a transparent
hugepage under splitting by __split_huge_page_refcount().
He then found the problem could also theoretically materialize with
page_cache_get_speculative() during the speculative radix tree lookups
that uses get_page_unless_zero() in SMP if the radix tree page is freed
and reallocated and get_user_pages is called on it before
page_cache_get_speculative has a chance to call get_page_unless_zero().
So the best way to fix the problem is to keep page_tail->_count zero at
all times. This will guarantee that get_page_unless_zero() can never
succeed on any tail page. page_tail->_mapcount is guaranteed zero and
is unused for all tail pages of a compound page, so we can simply
account the tail page references there and transfer them to
tail_page->_count in __split_huge_page_refcount() (in addition to the
head_page->_mapcount).
While debugging this s/_count/_mapcount/ change I also noticed get_page is
called by direct-io.c on pages returned by get_user_pages. That wasn't
entirely safe because the two atomic_inc in get_page weren't atomic. As
opposed to other get_user_page users like secondary-MMU page fault to
establish the shadow pagetables would never call any superflous get_page
after get_user_page returns. It's safer to make get_page universally safe
for tail pages and to use get_page_foll() within follow_page (inside
get_user_pages()). get_page_foll() is safe to do the refcounting for tail
pages without taking any locks because it is run within PT lock protected
critical sections (PT lock for pte and page_table_lock for
pmd_trans_huge).
The standard get_page() as invoked by direct-io instead will now take
the compound_lock but still only for tail pages. The direct-io paths
are usually I/O bound and the compound_lock is per THP so very
finegrined, so there's no risk of scalability issues with it. A simple
direct-io benchmarks with all lockdep prove locking and spinlock
debugging infrastructure enabled shows identical performance and no
overhead. So it's worth it. Ideally direct-io should stop calling
get_page() on pages returned by get_user_pages(). The spinlock in
get_page() is already optimized away for no-THP builds but doing
get_page() on tail pages returned by GUP is generally a rare operation
and usually only run in I/O paths.
This new refcounting on page_tail->_mapcount in addition to avoiding new
RCU critical sections will also allow the working set estimation code to
work without any further complexity associated to the tail page
refcounting with THP.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-64, doc: Remove int 0xcc from entry_64.S documentation
x86, vsyscall: Add missing <asm/fixmap.h> to arch/x86/mm/fault.c
Fix up trivial conflicts in arch/x86/mm/fault.c (asm/fixmap.h vs
asm/vsyscall.h: both work, which to use? Whatever..)
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, amd: Include linux/elf.h since we use stuff from asm/elf.h
x86: cache_info: Update calculation of AMD L3 cache indices
x86: cache_info: Kill the atomic allocation in amd_init_l3_cache()
x86: cache_info: Kill the moronic shadow struct
x86: cache_info: Remove bogus free of amd_l3_cache data
x86, amd: Include elf.h explicitly, prepare the code for the module.h split
x86-32, amd: Move va_align definition to unbreak 32-bit build
x86, amd: Move BSP code to cpu_dev helper
x86: Add a BSP cpu_dev helper
x86, amd: Avoid cache aliasing penalties on AMD family 15h
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-64: Fix CFI data for interrupt frames
x86-64: Don't apply destructive erratum workaround on unaffected CPUs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits)
MAINTAINERS: linux-m32r is moderated for non-subscribers
linux@lists.openrisc.net is moderated for non-subscribers
Drop default from "DM365 codec select" choice
parisc: Kconfig: cleanup Kernel page size default
Kconfig: remove redundant CONFIG_ prefix on two symbols
cris: remove arch/cris/arch-v32/lib/nand_init.S
microblaze: add missing CONFIG_ prefixes
h8300: drop puzzling Kconfig dependencies
MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers
tty: drop superfluous dependency in Kconfig
ARM: mxc: fix Kconfig typo 'i.MX51'
Fix file references in Kconfig files
aic7xxx: fix Kconfig references to READMEs
Fix file references in drivers/ide/
thinkpad_acpi: Fix printk typo 'bluestooth'
bcmring: drop commented out line in Kconfig
btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888'
doc: raw1394: Trivial typo fix
CIFS: Don't free volume_info->UNC until we are entirely done with it.
treewide: Correct spelling of successfully in comments
...
Commit 4b239f458 ("x86-64, mm: Put early page table high") causes a S4
regression since 2.6.39, namely the machine reboots occasionally at S4
resume. It doesn't happen always, overall rate is about 1/20. But,
like other bugs, once when this happens, it continues to happen.
This patch fixes the problem by essentially reverting the memory
assignment in the older way.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Yinghai Lu <yinghai.lu@oracle.com>
[ We'll hopefully find the real fix, but that's too late for 3.1 now ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Erratum 93 applies to AMD K8 CPUs only, and its workaround
(forcing the upper 32 bits of %rip to all get set under certain
conditions) is actually getting in the way of analyzing page
faults occurring during EFI physical mode runtime calls (in
particular the page table walk shown is completely unrelated to
the actual fault). This is because typically EFI runtime code
lives in the space between 2G and 4G, which - modulo the above
manipulation - is likely to overlap with the kernel or modules
area.
While even for the other errata workarounds their taking effect
could be limited to just the affected CPUs, none of them appears
to be destructive, and they're generally getting called only
outside of performance critical paths, so they're being left
untouched.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/4E835FE30200007800058464@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It was pointed out by 'make versioncheck' that the include of
linux/version.h is not needed in arch/x86/mm/mmio-mod.c .
This patch removes it.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
arch/x86/mm/fault.c now depend on having the symbol VSYSCALL_START
defined, which is best handled by including <asm/fixmap.h> (it isn't
unreasonable we may want other fixed addresses in this file in the
future, and so it is cleaner than including <asm/vsyscall.h>
directly.)
This addresses an x86-64 allnoconfig build failure. On other
configurations it was masked by an indirect path:
<asm/smp.h> -> <asm/apic.h> -> <asm/fixmap.h> -> <asm/vsyscall.h>
... however, the first such include is conditional on CONFIG_X86_LOCAL_APIC.
Originally-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/CA%2B55aFxsOMc9=p02r8-QhJ=h=Mqwckk4_Pnx9LQt5%2BfqMp_exQ@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
arch/x86/mm/fault.c needs to include asm/vsyscall.h to fix a
build error:
arch/x86/mm/fault.c: In function '__bad_area_nosemaphore':
arch/x86/mm/fault.c:728: error: 'VSYSCALL_START' undeclared (first use in this function)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-tip:
x86-64: Rework vsyscall emulation and add vsyscall= parameter
x86-64: Wire up getcpu syscall
x86: Remove unnecessary compile flag tweaks for vsyscall code
x86-64: Add vsyscall:emulate_vsyscall trace event
x86-64: Add user_64bit_mode paravirt op
x86-64, xen: Enable the vvar mapping
x86-64: Work around gold bug 13023
x86-64: Move the "user" vsyscall segment out of the data segment.
x86-64: Pad vDSO to a page boundary
There are three choices:
vsyscall=native: Vsyscalls are native code that issues the
corresponding syscalls.
vsyscall=emulate (default): Vsyscalls are emulated by instruction
fault traps, tested in the bad_area path. The actual contents of
the vsyscall page is the same as the vsyscall=native case except
that it's marked NX. This way programs that make assumptions about
what the code in the page does will not be confused when they read
that code.
vsyscall=none: Trying to execute a vsyscall will segfault.
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/8449fb3abf89851fd6b2260972666a6f82542284.1312988155.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
hpa reported that dfb09f9b7a breaks 32-bit
builds with the following error message:
/home/hpa/kernel/linux-tip.cpu/arch/x86/kernel/cpu/amd.c:437: undefined
reference to `va_align'
/home/hpa/kernel/linux-tip.cpu/arch/x86/kernel/cpu/amd.c:436: undefined
reference to `va_align'
This is due to the fact that va_align is a global in a 64-bit only
compilation unit. Move it to mmap.c where it is visible to both
subarches.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Link: http://lkml.kernel.org/r/1312633899-1131-1-git-send-email-bp@amd64.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This patch provides performance tuning for the "Bulldozer" CPU. With its
shared instruction cache there is a chance of generating an excessive
number of cache cross-invalidates when running specific workloads on the
cores of a compute module.
This excessive amount of cross-invalidations can be observed if cache
lines backed by shared physical memory alias in bits [14:12] of their
virtual addresses, as those bits are used for the index generation.
This patch addresses the issue by clearing all the bits in the [14:12]
slice of the file mapping's virtual address at generation time, thus
forcing those bits the same for all mappings of a single shared library
across processes and, in doing so, avoids instruction cache aliases.
It also adds the command line option "align_va_addr=(32|64|on|off)" with
which virtual address alignment can be enabled for 32-bit or 64-bit x86
individually, or both, or be completely disabled.
This change leaves virtual region address allocation on other families
and/or vendors unaffected.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Link: http://lkml.kernel.org/r/1312550110-24160-2-git-send-email-bp@amd64.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Three places in the kernel assume that the only long mode CPL 3
selector is __USER_CS. This is not true on Xen -- Xen's sysretq
changes cs to the magic value 0xe033.
Two of the places are corner cases, but as of "x86-64: Improve
vsyscall emulation CS and RIP handling"
(c9712944b2), vsyscalls will segfault
if called with Xen's extra CS selector. This causes a panic when
older init builds die.
It seems impossible to make Xen use __USER_CS reliably without
taking a performance hit on every system call, so this fixes the
tests instead with a new paravirt op. It's a little ugly because
ptrace.h can't include paravirt.h.
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/f4fcb3947340d9e96ce1054a432f183f9da9db83.1312378163.git.luto@mit.edu
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, smpboot: Mark the names[] array in __inquire_remote_apic() as const
x86: Convert vmalloc()+memset() to vzalloc()
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (123 commits)
perf: Remove the nmi parameter from the oprofile_perf backend
x86, perf: Make copy_from_user_nmi() a library function
perf: Remove perf_event_attr::type check
x86, perf: P4 PMU - Fix typos in comments and style cleanup
perf tools: Make test use the preset debugfs path
perf tools: Add automated tests for events parsing
perf tools: De-opt the parse_events function
perf script: Fix display of IP address for non-callchain path
perf tools: Fix endian conversion reading event attr from file header
perf tools: Add missing 'node' alias to the hw_cache[] array
perf probe: Support adding probes on offline kernel modules
perf probe: Add probed module in front of function
perf probe: Introduce debuginfo to encapsulate dwarf information
perf-probe: Move dwarf library routines to dwarf-aux.{c, h}
perf probe: Remove redundant dwarf functions
perf probe: Move strtailcmp to string.c
perf probe: Rename DIE_FIND_CB_FOUND to DIE_FIND_CB_END
tracing/kprobe: Update symbol reference when loading module
tracing/kprobes: Support module init function probing
kprobes: Return -ENOENT if probe point doesn't exist
...
Other than sanity check and debug message, the x86 specific version of
memblock reserve/free functions are simple wrappers around the generic
versions - memblock_reserve/free().
This patch adds debug messages with caller identification to the
generic versions and replaces x86 specific ones and kills them.
arch/x86/include/asm/memblock.h and arch/x86/mm/memblock.c are empty
after this change and removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-14-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
memblock_x86_hole_size() calculates the total size of holes in a given
range according to memblock and is used by numa emulation code and
numa_meminfo_cover_memory().
Since conversion to MEMBLOCK_NODE_MAP, absent_pages_in_range() also
uses memblock and gives the same result. This patch replaces
memblock_x86_hole_size() uses with absent_pages_in_range(). After the
conversion the x86 function doesn't have any user left and is killed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-12-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
memblock_find_dma_reserve() wants to find out how much memory is
reserved under MAX_DMA_PFN. memblock_x86_memory_[free_]in_range() are
used to find out the amounts of all available and free memory in the
area, which are then subtracted to find out the amount of reservation.
memblock_x86_memblock_[free_]in_range() are implemented using
__memblock_x86_memory_in_range() which builds ranges from memblock and
then count them, which is rather unnecessarily complex.
This patch open codes the counting logic directly in
memblock_find_dma_reserve() using memblock iterators and removes now
unused __memblock_x86_memory_in_range() and find_range_array().
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-11-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
__get_free_all_memory_range() walks memblock, calculates free memory
areas and fills in the specified range. It can be easily replaced
with for_each_free_mem_range().
Convert free_low_memory_core_early() and
add_highpages_with_active_regions() to for_each_free_mem_range().
This leaves __get_free_all_memory_range() without any user. Kill it
and related functions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-10-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
nomemblock is currently used only by x86 and on x86_32
free_all_memory_core_early() silently freed only the low mem because
get_free_all_memory_range() in arch/x86/mm/memblock.c implicitly
limited range to max_low_pfn.
Rename free_all_memory_core_early() to free_low_memory_core_early()
and make it call __get_free_all_memory_range() and limit the range to
max_low_pfn explicitly. This makes things clearer and also is
consistent with the bootmem behavior.
This leaves get_free_all_memory_range() without any user. Kill it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-9-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
setup_bios_corruption_check() and memtest do_one_pass() open code
memblock free area iteration using memblock_x86_find_in_range_size().
Convert them to use for_each_free_mem_range() instead.
This leaves memblock_x86_find_in_range_size() and
memblock_x86_check_reserved_size() unused. Kill them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310462166-31469-8-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
From 5732e1247898d67cbf837585150fe9f68974671d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:16 +0200
Convert x86 to HAVE_MEMBLOCK_NODE_MAP. The only difference in memory
handling is that allocations can't no longer cross node boundaries
whether they're node affine or not, which shouldn't matter at all.
This conversion will enable further simplification of boot memory
handling.
-v2: Fix build failure on !NUMA configurations discovered by hpa.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110714094423.GG3455@htj.dyndns.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
With the previous changes, generic NUMA aware memblock API has feature
parity with memblock_x86_find_in_range_node(). There currently are
two users - x86 setup_node_data() and __alloc_memory_core_early() in
nobootmem.c.
This patch converts the former to use memblock_alloc_nid() and the
latter memblock_find_range_in_node(), and kills
memblock_x86_find_in_range_node() and related functions including
find_memory_early_core_early() in page_alloc.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310460395-30913-9-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Callback based iteration is cumbersome and much less useful than
for_each_*() iterator. This patch implements for_each_mem_pfn_range()
which replaces work_with_active_regions(). All the current users of
work_with_active_regions() are converted.
This simplifies walking over early_node_map and will allow converting
internal logics in page_alloc to use iterator instead of walking
early_node_map directly, which in turn will enable moving node
information to memblock.
powerpc change is only compile tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110714074610.GD3455@htj.dyndns.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
25818f0f28 (memblock: Make MEMBLOCK_ERROR be 0) thankfully made
MEMBLOCK_ERROR 0 and there already are codes which expect error return
to be 0. There's no point in keeping MEMBLOCK_ERROR around. End its
misery.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1310457490-3356-6-git-send-email-tj@kernel.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
SPARSEMEM w/o VMEMMAP and DISCONTIGMEM, both used only on 32bit, use
sections array to map pfn to nid which is limited in granularity. If
NUMA nodes are laid out such that the mapping cannot be accurate, boot
will fail triggering BUG_ON() in mminit_verify_page_links().
On 32bit, it's 512MiB w/ PAE and SPARSEMEM. This seems to have been
granular enough until commit 2706a0bf7b (x86, NUMA: Enable
CONFIG_AMD_NUMA on 32bit too). Apparently, there is a machine which
aligns NUMA nodes to 128MiB and has only AMD NUMA but not SRAT. This
led to the following BUG_ON().
On node 0 totalpages: 2096615
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3927 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 16405 pages used for memmap
HighMem zone: 1853533 pages, LIFO batch:31
BUG: Int 6: CR2 (null)
EDI (null) ESI 00000002 EBP 00000002 ESP c1543ecc
EBX f2400000 EDX 00000006 ECX (null) EAX 00000001
err (null) EIP c16209aa CS 00000060 flg 00010002
Stack: f2400000 00220000 f7200800 c1620613 00220000 01000000 04400000 00238000
(null) f7200000 00000002 f7200b58 f7200800 c1620929 000375fe (null)
f7200b80 c16395f0 00200a02 f7200a80 (null) 000375fe 00000002 (null)
Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00181-g2706a0b #17
Call Trace:
[<c136b1e5>] ? early_fault+0x2e/0x2e
[<c16209aa>] ? mminit_verify_page_links+0x12/0x42
[<c1620613>] ? memmap_init_zone+0xaf/0x10c
[<c1620929>] ? free_area_init_node+0x2b9/0x2e3
[<c1607e99>] ? free_area_init_nodes+0x3f2/0x451
[<c1601d80>] ? paging_init+0x112/0x118
[<c15f578d>] ? setup_arch+0x791/0x82f
[<c15f43d9>] ? start_kernel+0x6a/0x257
This patch implements node_map_pfn_alignment() which determines
maximum internode alignment and update numa_register_memblks() to
reject NUMA configuration if alignment exceeds the pfn -> nid mapping
granularity of the memory model as determined by PAGES_PER_SECTION.
This makes the problematic machine boot w/ flatmem by rejecting the
NUMA config and provides protection against crazy NUMA configurations.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110712074534.GB2872@htj.dyndns.org
LKML-Reference: <20110628174613.GP478@escobedo.osrc.amd.com>
Reported-and-Tested-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Cc: Conny Seidel <conny.seidel@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
DISCONTIGMEM on x86-32 implements pfn -> nid mapping similarly to
SPARSEMEM; however, it calls each mapping unit ELEMENT instead of
SECTION. This patch renames it to SECTION so that PAGES_PER_SECTION
is valid for both DISCONTIGMEM and SPARSEMEM. This will be used by
the next patch to implement mapping granularity check.
This patch is trivial constant rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110712074422.GA2872@htj.dyndns.org
Cc: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The macro MIN_MEMORY_BLOCK_SIZE is currently defined twice in two .c
files, and I need it in a third one to fix a powerpc bug, so let's
first move it into a header
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.
For the various event classes:
- hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
the PMI-tail (ARM etc.)
- tracepoint: nmi=0; since tracepoint could be from NMI context.
- software: nmi=[0,1]; some, like the schedule thing cannot
perform wakeups, and hence need 0.
As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).
The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit 916f676f8d started reserving boot service code since some systems
require you to keep that code around until SetVirtualAddressMap is called.
However, in some cases those areas will overlap with reserved regions.
The proper medium-term fix is to fix the bootloader to prevent the
conflicts from occurring by moving the kernel to a better position,
but the kernel should check for this possibility, and only reserve regions
which can be reserved.
Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Link: http://lkml.kernel.org/r/4DF7A005.1050407@gmail.com
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Swap the 1st and 2nd parameters of save_stack_trace_regs()
as same as the parameters of save_stack_trace_tsk().
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@gmail.com>
Link: http://lkml.kernel.org/r/20110608070921.17777.31103.stgit@fedora15
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ingo suggested SIGKILL check should be moved into slowpath
function. This will reduce the page fault fastpath impact
of this recent commit:
37b23e0525: x86,mm: make pagefault killable
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: minchan.kim@gmail.com
Cc: willy@linux.intel.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/4DDE0B5C.9050907@jp.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Straightforward conversion of i_mmap_lock to a mutex.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fold all the mmu_gather rework patches into one for submission
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When an oom killing occurs, almost all processes are getting stuck at the
following two points.
1) __alloc_pages_nodemask
2) __lock_page_or_retry
1) is not very problematic because TIF_MEMDIE leads to an allocation
failure and getting out from page allocator.
2) is more problematic. In an OOM situation, zones typically don't have
page cache at all and memory starvation might lead to greatly reduced IO
performance. When a fork bomb occurs, TIF_MEMDIE tasks don't die quickly,
meaning that a fork bomb may create new process quickly rather than the
oom-killer killing it. Then, the system may become livelocked.
This patch makes the pagefault interruptible by SIGKILL.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Eliminate various 'set but not used' warnings
x86, SMEP: Fix section mismatch warnings
x86, amd: Use _safe() msr access for GartTlbWlk disable code
Commit e66eed651f ("list: remove prefetching from regular list
iterators") removed the include of prefetch.h from list.h, which
uncovered several cases that had apparently relied on that rather
obscure header file dependency.
So this fixes things up a bit, using
grep -L linux/prefetch.h $(git grep -l '[^a-z_]prefetchw*(' -- '*.[ch]')
grep -L 'prefetchw*(' $(git grep -l 'linux/prefetch.h' -- '*.[ch]')
to guide us in finding files that either need <linux/prefetch.h>
inclusion, or have it despite not needing it.
There are more of them around (mostly network drivers), but this gets
many core ones.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
x86, mm: Allow ZONE_DMA to be configurable
x86, NUMA: Trim numa meminfo with max_pfn in a separate loop
x86, NUMA: Rename setup_node_bootmem() to setup_node_data()
x86, NUMA: Enable emulation on 32bit too
x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too
x86, NUMA: Rename amdtopology_64.c to amdtopology.c
x86, NUMA: Make numa_init_array() static
x86, NUMA: Make 32bit use common NUMA init path
x86, NUMA: Initialize and use remap allocator from setup_node_bootmem()
x86-32, NUMA: Add @start and @end to init_alloc_remap()
x86, NUMA: Remove long 64bit assumption from numa.c
x86, NUMA: Enable build of generic NUMA init code on 32bit
x86, NUMA: Move NUMA init logic from numa_64.c to numa.c
x86-32, NUMA: Update numaq to use new NUMA init protocol
x86-32, NUMA: Replace srat_32.c with srat.c
x86-32, NUMA: implement temporary NUMA init shims
x86, NUMA: Move numa_nodes_parsed to numa.[hc]
x86-32, NUMA: Move get_memcfg_numa() into numa_32.c
x86, NUMA: make srat.c 32bit safe
x86, NUMA: rename srat_64.c to srat.c
...
ZONE_DMA is unnecessary for a large number of machines that do not
require less than 32-bit DMA addressing, e.g. ISA legacy DMA or PCI
cards with a restricted DMA address mask.
This patch allows users to disable ZONE_DMA for x86 if they know they
will not be using such devices with their kernel.
This prevents the VM from unnecessarily reserving a ratio of memory
(defaulting to 1/256th of system capacity) with lowmem_reserve_ratio
for such allocations when it will never be used.
Signed-off-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.00.1105161353560.4353@chino.kir.corp.google.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
With CONFIG_DEBUG_SECTION_MISMATCH=y I see these warnings in next-20110415:
LD vmlinux.o
MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x1ba48): Section mismatch in reference from the function native_pagetable_reserve() to the function .init.text:memblock_x86_reserve_range()
The function native_pagetable_reserve() references
the function __init memblock_x86_reserve_range().
This is often because native_pagetable_reserve lacks a __init
annotation or the annotation of memblock_x86_reserve_range is wrong.
This patch fixes the issue.
Thanks to pipacs from PaX project for help on IRC.
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Introduce a new x86_init hook called pagetable_reserve that at the end
of init_memory_mapping is used to reserve a range of memory addresses for
the kernel pagetable pages we used and free the other ones.
On native it just calls memblock_x86_reserve_range while on xen it also
takes care of setting the spare memory previously allocated
for kernel pagetable pages from RO to RW, so that it can be used for
other purposes.
A detailed explanation of the reason why this hook is needed follows.
As a consequence of the commit:
commit 4b239f458c
Author: Yinghai Lu <yinghai@kernel.org>
Date: Fri Dec 17 16:58:28 2010 -0800
x86-64, mm: Put early page table high
at some point init_memory_mapping is going to reach the pagetable pages
area and map those pages too (mapping them as normal memory that falls
in the range of addresses passed to init_memory_mapping as argument).
Some of those pages are already pagetable pages (they are in the range
pgt_buf_start-pgt_buf_end) therefore they are going to be mapped RO and
everything is fine.
Some of these pages are not pagetable pages yet (they fall in the range
pgt_buf_end-pgt_buf_top; for example the page at pgt_buf_end) so they
are going to be mapped RW. When these pages become pagetable pages and
are hooked into the pagetable, xen will find that the guest has already
a RW mapping of them somewhere and fail the operation.
The reason Xen requires pagetables to be RO is that the hypervisor needs
to verify that the pagetables are valid before using them. The validation
operations are called "pinning" (more details in arch/x86/xen/mmu.c).
In order to fix the issue we mark all the pages in the entire range
pgt_buf_start-pgt_buf_top as RO, however when the pagetable allocation
is completed only the range pgt_buf_start-pgt_buf_end is reserved by
init_memory_mapping. Hence the kernel is going to crash as soon as one
of the pages in the range pgt_buf_end-pgt_buf_top is reused (b/c those
ranges are RO).
For this reason we need a hook to reserve the kernel pagetable pages we
used and free the other ones so that they can be reused for other
purposes.
On native it just means calling memblock_x86_reserve_range, on Xen it
also means marking RW the pagetable pages that we allocated before but
that haven't been used before.
Another way to fix this is without using the hook is by adding a 'if
(xen_pv_domain)' in the 'init_memory_mapping' code and calling the Xen
counterpart, but that is just nasty.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
During testing 32bit numa unifying code from tj, found one system with
more than 64g fails to use numa. It turns out we do not trim numa
meminfo correctly against max_pfn in case start address of a node is
higher than 64GiB. Bug fix made it to tip tree.
This patch moves the checking and trimming to a separate loop. So we
don't need to compare low/high in following merge loops. It makes the
code more readable.
Also it makes the node merge printouts less strange. On a 512GiB numa
system with 32bit,
before:
> NUMA: Node 0 [0,a0000) + [100000,80000000) -> [0,80000000)
> NUMA: Node 0 [0,80000000) + [100000000,1080000000) -> [0,1000000000)
after:
> NUMA: Node 0 [0,a0000) + [100000,80000000) -> [0,80000000)
> NUMA: Node 0 [0,80000000) + [100000000,1000000000) -> [0,1000000000)
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
[Updated patch description and comment slightly.]
Signed-off-by: Tejun Heo <tj@kernel.org>
After using memblock to replace bootmem, that function only sets up
node_data now.
Change the name to reflect what it actually does.
tj: Minor adjustment to the patch description.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that NUMA init path is unified, NUMA emulation can be enabled on
32bit. Make numa_emluation.c safe on 32bit by doing the followings.
* Define MAX_DMA32_PFN on 32bit too.
* Include bootmem.h for max_pfn declaration.
* Use u64 explicitly and always use PFN_PHYS() when converting page
number to address.
* Avoid __udivdi3() generation on 32bit by doing number of pages
calculation instead in split_nodes_interleave().
And drop X86_64 dependency from Kconfig.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Now that NUMA init path is unified, amdtopology can be enabled on
32bit. Make amdtopology.c safe on 32bit by explicitly using u64 and
drop X86_64 dependency from Kconfig.
Inclusion of bootmem.h is added for max_pfn declaration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
amdtopology is going to be used by 32bit too drop _64 suffix. This is
pure rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
numa_init_array() no longer has users outside of numa.c. Make it
static.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
With both _numa_init() methods converted and the rest of init code
adjusted, numa_32.c now can switch from the 32bit only init code to
the common one in numa.c.
* Shim get_memcfg_*()'s are dropped and initmem_init() calls
x86_numa_init(), which is updated to handle NUMAQ.
* All boilerplate operations including node range limiting, pgdat
alloc/init are handled by numa_init(). 32bit only implementation is
removed.
* 32bit numa_add_memblk(), numa_set_distance() and
memory_add_physaddr_to_nid() removed and common versions in
numa_32.c enabled for 32bit.
This change causes the following behavior changes.
* NODE_DATA()->node_start_pfn/node_spanned_pages properly initialized
for 32bit too.
* Much more sanity checks and configuration cleanups.
* Proper handling of node distances.
* The same NUMA init messages as 64bit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
setup_node_bootmem() is taken from 64bit and doesn't use remap
allocator. It's about to be shared with 32bit so add support for it.
If NODE_DATA is remapped, it's noted in the debug message and node
locality check is skipped as the __pa() of the remapped address
doesn't reflect the actual physical address.
On 64bit, remap allocator becomes noop and doesn't affect the
behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Instead of dereferencing node_start/end_pfn[] directly, make
init_alloc_remap() take @start and @end and let the caller be
responsible for making sure the range is sane. This is to prepare for
use from unified NUMA init code.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Code moved from numa_64.c has assumption that long is 64bit in several
places. This patch removes the assumption by using {s|u}64_t
explicity, using PFN_PHYS() for page number -> addr conversions and
adjusting printf formats.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Generic NUMA init code was moved to numa.c from numa_64.c but is still
guaraded by CONFIG_X86_64. This patch removes the compile guard and
enables compiling on 32bit.
* numa_add_memblk() and numa_set_distance() clash with the shim
implementation in numa_32.c and are left out.
* memory_add_physaddr_to_nid() clashes with 32bit implementation and
is left out.
* MAX_DMA_PFN definition in dma.h moved out of !CONFIG_X86_32.
* node_data definition in numa_32.c removed in favor of the one in
numa.c.
There are places where ulong is assumed to be 64bit. The next patch
will fix them up. Note that although the code is compiled it isn't
used yet and this patch doesn't cause any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Move the generic 64bit NUMA init machinery from numa_64.c to numa.c.
* node_data[], numa_mem_info and numa_distance
* numa_add_memblk[_to](), numa_remove_memblk[_from]()
* numa_set_distance() and friends
* numa_init() and all the numa_meminfo handling helpers called from it
* dummy_numa_init()
* memory_add_physaddr_to_nid()
A new function x86_numa_init() is added and the content of
numa_64.c::initmem_init() is moved into it. initmem_init() now simply
calls x86_numa_init().
Constants and numa_off declaration are moved from numa_{32|64}.h to
numa.h.
This is code reorganization and doesn't involve any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Update numaq such that it calls numa_add_memblk() and sets
numa_nodes_parsed instead of directly diddling with NUMA states. The
original get_memcfg_numaq() is renamed to numaq_numa_init() and new
get_memcfg_numaq() is created in numa_32.c.
The shim numa_add_memblk() implementation handles node_start/end_pfn[]
and node_set_online() for nodes with memory. The new
get_memcfg_numaq() exactly the same with get_memcfg_from_srat() other
than calling the numaq init function. Things get_memcfgs_numaq() do
are not strictly necessary for numaq but added for consistency and to
help unifying NUMA init handling.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
SRAT support implementation in srat_32.c and srat.c are generally
similar; however, there are some differences.
First of all, 64bit implementation supports more types of SRAT
entries. 64bit supports x2apic, affinity, memory and SLIT. 32bit
only supports processor and memory.
Most other differences stem from different initialization protocols
employed by 64bit and 32bit NUMA init paths.
On 64bit,
* Mappings among PXM, node and apicid are directly done in each SRAT
entry callback.
* Memory affinity information is passed to numa_add_memblk() which
takes care of all interfacing with NUMA init.
* Doesn't directly initialize NUMA configurations. All the
information is recorded in numa_nodes_parsed and memblks.
On 32bit,
* Checks numa_off.
* Things go through one more level of indirection via private tables
but eventually end up initializing the same mappings.
* node_start/end_pfn[] are initialized and
memblock_x86_register_active_regions() is called for each memory
chunk.
* node_set_online() is called for each online node.
* sort_node_map() is called.
There are also other minor differences in sanity checking and messages
but taking 64bit version should be good enough.
This patch drops the 32bit specific implementation and makes the 64bit
implementation common for both 32 and 64bit.
The init protocol differences are dealt with in two places - the
numa_add_memblk() shim added in the previous patch and new temporary
numa_32.c:get_memcfg_from_srat() which wraps invocation of
x86_acpi_numa_init().
The shim numa_add_memblk() handles the folowings.
* node_start/end_pfn[] initialization.
* node_set_online() for memory nodes.
* Invocation of memblock_x86_register_active_regions().
The shim get_memcfg_from_srat() handles the followings.
* numa_off check.
* node_set_online() for CPU nodes.
* sort_node_map() invocation.
* Clearing of numa_nodes_parsed and active_ranges on failure.
The shims are temporary and will be removed as the generic NUMA init
path in 32bit is replaced with 64bit one.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
To help transition to common NUMA init, implement temporary 32bit
shims for numa_add_memblk() and numa_set_distance().
numa_add_memblk() registers the memblk and adjusts
node_start/end_pfn[]. numa_set_distance() is noop.
These shims will allow using 64bit NUMA init functions on 32bit and
gradual transition to common NUMA init path.
For detailed description, please read description of commits which
make use of the shim functions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Move numa_nodes_parsed from numa_64.[hc] to numa.[hc] to prepare for
NUMA init path unification.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
There's no reason get_memcfg_numa() to be implemented inline in
mmzone_32.h. Move it to numa_32.c and also make
get_memcfg_numa_flag() static.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Make srat.c 32bit safe by removing the assumption that unsigned long
is 64bit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Rename srat_64.c to srat.c. This is to prepare for unification of
NUMA init paths between 32 and 64bit.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
* Kill no longer used struct bootnode.
* Kill dangling declaration of pxm_to_nid() in numa_32.h.
* Make setup_node_bootmem() static.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Instead of calling memory_present() for each region from NUMA init,
call sparse_memory_present_with_active_regions() from paging_init()
similarly to x86-64.
For flat and numaq, this results in exactly the same memory_present()
calls. For srat, if there are multiple memory chunks for a node,
after this change, memory_present() will be called separately for each
chunk instead of being called once to encompass the whole range, which
doesn't cause any harm and actually is the better behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Currently, the only meaningful user of apic->x86_32_numa_cpu_node() is
NUMAQ which returns valid mapping only after CPU is initialized during
SMP bringup; thus, the previous patch to set apicid -> node in
setup_local_APIC() makes __apicid_to_node[] always contain the correct
mapping whether custom apic->x86_32_numa_cpu_node() is used or not.
So, there is no reason to keep separate 32bit implementation. We can
always consult __apicid_to_node[]. Move 64bit implementation from
numa_64.c to numa.c and remove 32bit implementation from numa_32.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
With top-down memblock allocation, the allocation range limits in
ealry_node_mem() can be simplified - try node-local first, then any
node but in any case don't allocate below DMA limit.
Remove early_node_mem() and implement simplified allocation directly
in setup_node_bootmem().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Make the following trivial changes in preparation for further updates.
* nodeid -> nid, nid -> tnid
* use nd_ prefix for nodedata related variables
* remove start/end_pfn and use start/end directly
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
The only special handling NUMA needs to do for hotadd memory is
determining the node for the hotadd memory given the address of it and
there's nothing specific to specific config method used.
srat_64.c does somewhat elaborate error checking on
ACPI_SRAT_MEM_HOT_PLUGGABLE regions, remembers them and implements
memory_add_physaddr_to_nid() which determines the node for given
hotadd address.
This is almost completely redundant. All the information is already
available to the generic NUMA code which already performs all the
sanity checking and merging. All that's necessary is not using
__initdata from numa_meminfo and providing a function which uses it to
map address to node.
Drop the specific implementation from srat_64.c and add generic
memory_add_physaddr_to_nid() in numa_64.c, which is enabled if
CONFIG_MEMORY_HOTPLUG is set. Other than dropping the code, srat_64.c
doesn't need any change as it already calls numa_add_memblk() for hot
pluggable regions which is enough.
While at it, change CONFIG_MEMORY_HOTPLUG_SPARSE in srat_64.c to
CONFIG_MEMORY_HOTPLUG, for NUMA on x86-64, the two are always the
same.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Merge reason: Pick up the following two fix commits.
2be19102b7: x86, NUMA: Fix empty memblk detection in numa_cleanup_meminfo()
765af22da8: x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change
Scheduled NUMA init 32/64bit unification changes depend on these.
Signed-off-by: Tejun Heo <tj@kernel.org>
numa_cleanup_meminfo() trims each memblk between low (0) and
high (max_pfn) limits and discards empty ones. However, the
emptiness detection incorrectly used equality test. If the
start of a memblk is higher than max_pfn, it is empty but fails
the equality test and doesn't get discarded.
The condition triggers when max_pfn is lower than start of a
NUMA node and results in memory misconfiguration - leading to
WARN_ON()s and other funnies. The bug was discovered in devel
branch where 32bit too uses this code path for NUMA init. If a
node is above the addressing limit, max_pfn ends up lower than
the node triggering this problem.
The failure hasn't been observed on x86-64 but is still possible
with broken hardware e820/NUMA info. As the fix is very low
risk, it would be better to apply it even for 64bit.
Fix it by using >= instead of ==.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
[ Extracted the actual fix from the original patch and rewrote patch description. ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110501171204.GO29280@htj.dyndns.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While tracking down the reason for an ioremap() failure I was
distracted by the WARN_ONCE() in __ioremap_caller().
Performing a WARN_ONCE() sanity check before the mapping
is successful seems pointless if the caller sends bad values.
A case in point is when the BIOS provides erroneous screen_info
values causing vesafb_probe() to request an outrageuous size.
The WARN_ONCE is then wasted on bogosity. Move the warning to a
point where the mapping has been successfully allocated.
Addresses:
http://bugs.launchpad.net/bugs/772042
Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Link: http://lkml.kernel.org/r/4DB99D2E.9080106@canonical.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The cpu<->node mappings under CONFIG_DEBUG_PER_CPU_MAPS=y
when NUMA emulation is enabled is currently broken because it does
not iterate through every emulated node and bind cpus that have
affinity to it.
NUMA emulation should bind each cpu to every local node to
accurately represent the true NUMA topology of the underlying
machine.
debug_cpumask_set_cpu() needs to be fixed at the same time so
that the debugging information that it emits shows the new
cpumask of the node being assigned when the cpu is being added
or removed.
It can now take responsibility of setting or clearing the cpu
itself to remove the need for duplicate code.
Also change its last parameter, "enable", to have the correct bool
type since it can only be true or false.
-v2: Fix the return statements, by Kosaki Motohiro
Acked-and-Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.00.1104201918470.12634@chino.kir.corp.google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that remap allocator is cleaned up, update comments such that they
are in docbook function description format and reflect the actual
implementation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-15-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Remap area size can be determined from node_remap_start_vaddr[] and
node_remap_end_vaddr[] making node_remap_size[] redundant. Remove it.
While at it, make resume_map_numa_kva() use @nr_pages for number of
pages instead of @size.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-14-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
With lowmem address reservation moved into init_alloc_remap(),
node_remap_offset[] is no longer useful. Remove it and related offset
handling code.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-13-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
pgdat allocation is handled differnetly from other remap allocations -
it's reserved during initialization. There's no reason to handle this
any differnetly. Remap allocator is initialized for every node and if
init failed the allocation will fail and pgdat allocation can fall
back to generic code like anyone else.
Remove special init-time pgdat reservation and make allocate_pgdat()
use alloc_remap() like everyone else.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-12-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
There's no reason to perform the actual remapping separately.
Collapse remap_numa_kva() into init_alloc_remap() and, while at it,
make it less verbose.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-11-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Remap alloc init is done in the following stages.
1. init_alloc_remap() calculates how much memory is necessary for each
node and reserves node local memory.
2. initmem_init() collects how much each node needs and reserves a
single contiguous lowmem area which can contain all.
3. init_remap_allocator() initializes allocator parameters from the
determined lowmem address and per-node offsets.
4. Actual remap happens.
There is no reason for the lowmem remap area to be reserved as a
single contiguous area at one go. They don't interact with each other
and the memblock allocator will put them side-by-side anyway.
This patch breaks up the single lowmem address reservation and put
per-node lowmem address reservation into init_alloc_remap() and
initializes allocator parameters directly in the function as all the
addresses are determined there. This merges steps 2 and 3 into 1.
While at it, remove now largely irrelevant comments in
init_alloc_remap().
This change causes the following behavior changes.
* Remap lowmem areas are allocated in smaller per-node chunks.
* Remap lowmem area reservation failure fail future remap allocations
instead of panicking.
* Remap allocator initialization is less verbose.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-10-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Remap allocator failure isn't fatal. The callers are required to fall
back to regular early memory allocation mechanisms on failure anyway,
so there's no reason to panic on remap init failure. Whining and
returning are enough.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-9-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Only pgdat and memmap use remap area and there isn't much benefit in
allowing per-node override. In addition, the use of node_remap_size[]
is confusing in that it contains number of bytes before remap
initialization and then number of pages afterwards.
Move remap size calculation for memap from specific NUMA config
implementations to init_alloc_remap() and make node_remap_size[]
static.
The only behavior difference is that, before this patch, numaq_32
didn't consider max_pfn when calculating the memmap size but it's
enforced after this patch, which is the right thing to do.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-8-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
@size variable in init_alloc_remap() is confusing in that it starts as
number of bytes as its name implies and then becomes number of pages.
Make it consistently represent bytes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-7-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
init_alloc_remap() is about to do more and using _kva suffix for
physical address becomes confusing because the function will be
handling both physical and virtual addresses. Rename @node_kva to
@node_pa.
This is trivial rename and doesn't cause any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-6-git-send-email-tj@kernel.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Separate the outer node walking loop and per-node logic from
calculate_numa_remap_pages(). The outer loop is collapsed into
initmem_init() and the per-node logic is moved into a new function -
init_alloc_remap().
The new function name is confusing with the existing
init_remap_allocator() and the behavior is the function isn't very
clean either at this point, but this is to prepare for further
cleanups and it will become prettier.
This function doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-5-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
memblock_find_in_range() now does top-down allocation by default, so
there's no reason for its callers to explicitly implement it by
gradually lowering the start address.
Remove redundant top-down allocation logic from init_meminit() and
calculate_numa_remap_pages().
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-4-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
When pgdat is reserved in init_remap_allocator(), PAGE_SIZE aligned
size will be used. Match the size alignment in initialization to
avoid allocation failure down the road.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-3-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
node_remap_{start|end}_vaddr[] describe [start, end) ranges; however,
alloc_remap() incorrectly failed when the current allocation + size
equaled the end but it should fail only when it goes over. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1301955840-7246-2-git-send-email-tj@kernel.org
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Commit d8fc3afc49 (x86, NUMA: Move *_numa_init() invocations
into initmem_init()) moved acpi_numa_init() call into NUMA
initmem_init() but forgot to update 32bit NUMA init breaking ACPI
NUMA configuration for 32bit.
acpi_numa_init() call was later moved again to srat_64.c. Match
it by adding the call to get_memcfg_from_srat() in srat_32.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <20110404100645.GE1420@mtj.dyndns.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In case !CONFIG_ACPI_NUMA and !CONFIG_AMD_NUMA gcc emits a warning
about the unused variable ret.
As that variable is in fact not needed I choose to remove it.
Signed-off-by: Florian Mickler <florian@mickler.org>
LKML-Reference: <1301843624-22364-1-git-send-email-florian@mickler.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
phys_to_nid() maps physical address to NUMA node id. This is
implemented by building perfect hash in compute_hash_shift() during
initialization.
However, with SPARSE memory model, the nid is encoded in page flags.
The perfect hash implementation was for DISCONTIG memory model which
got removed years ago by b263295dbf (x86: 64-bit, make sparsemem
vmemmap the only memory model).
So, the perfect hash ends up being used only during initialization
when the core SPARSE code already provides perfectly acceptable
generic early_pfn_to_nid() implementation.
Drop phys_to_nid() and use the generic ealry_pfn_to_nid() instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
deal with races in /proc/*/{syscall,stack,personality}
proc: enable writing to /proc/pid/mem
proc: make check_mem_permission() return an mm_struct on success
proc: hold cred_guard_mutex in check_mem_permission()
proc: disable mem_write after exec
mm: implement access_remote_vm
mm: factor out main logic of access_process_vm
mm: use mm_struct to resolve gate vma's in __get_user_pages
mm: arch: rename in_gate_area_no_task to in_gate_area_no_mm
mm: arch: make in_gate_area take an mm_struct instead of a task_struct
mm: arch: make get_gate_vma take an mm_struct instead of a task_struct
x86: mark associated mm when running a task in 32 bit compatibility mode
x86: add context tag to mark mm when running a task in 32-bit compatibility mode
auxv: require the target to be tracable (or yourself)
close race in /proc/*/environ
report errors in /proc/*/*map* sanely
pagemap: close races with suid execve
make sessionid permissions in /proc/*/task/* match those in /proc/*
fix leaks in path_lookupat()
Fix up trivial conflicts in fs/proc/base.c
Now that gate vma's are referenced with respect to a particular mm and not a
particular task it only makes sense to propagate the change to this predicate as
well.
Signed-off-by: Stephen Wilson <wilsons@start.ca>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Morally, the question of whether an address lies in a gate vma should be asked
with respect to an mm, not a particular task. Moreover, dropping the dependency
on task_struct will help make existing and future operations on mm's more
flexible and convenient.
Signed-off-by: Stephen Wilson <wilsons@start.ca>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Morally, the presence of a gate vma is more an attribute of a particular mm than
a particular task. Moreover, dropping the dependency on task_struct will help
make both existing and future operations on mm's more flexible and convenient.
Signed-off-by: Stephen Wilson <wilsons@start.ca>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
xen: update mask_rw_pte after kernel page tables init changes
xen: set max_pfn_mapped to the last pfn mapped
x86: Cleanup highmap after brk is concluded
Fix up trivial onflict (added header file includes) in
arch/x86/mm/init_64.c
Now cleanup_highmap actually is in two steps: one is early in head64.c
and only clears above _end; a second one is in init_memory_mapping() and
tries to clean from _brk_end to _end.
It should check if those boundaries are PMD_SIZE aligned but currently
does not.
Also init_memory_mapping() is called several times for numa or memory
hotplug, so we really should not handle initial kernel mappings there.
This patch moves cleanup_highmap() down after _brk_end is settled so
we can do everything in one step.
Also we honor max_pfn_mapped in the implementation of cleanup_highmap.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Flush TLB if PGD entry is changed in i386 PAE mode
x86, dumpstack: Correct stack dump info when frame pointer is available
x86: Clean up csum-copy_64.S a bit
x86: Fix common misspellings
x86: Fix misspelling and align params
x86: Use PentiumPro-optimized partial_csum() on VIA C7
According to intel CPU manual, every time PGD entry is changed in i386 PAE
mode, we need do a full TLB flush. Current code follows this and there is
comment for this too in the code.
But current code misses the multi-threaded case. A changed page table
might be used by several CPUs, every such CPU should flush TLB. Usually
this isn't a problem, because we prepopulate all PGD entries at process
fork. But when the process does munmap and follows new mmap, this issue
will be triggered.
When it happens, some CPUs keep doing page faults:
http://marc.info/?l=linux-kernel&m=129915020508238&w=2
Reported-by: Yasunori Goto<y-goto@jp.fujitsu.com>
Tested-by: Yasunori Goto<y-goto@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Cc: Mallick Asit K <asit.k.mallick@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm <linux-mm@kvack.org>
Cc: stable <stable@kernel.org>
LKML-Reference: <1300246649.2337.95.camel@sli10-conroe>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
They were generated by 'codespell' and then manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
native_flush_tlb_others() is called from:
flush_tlb_current_task()
flush_tlb_mm()
flush_tlb_page()
All these functions disable preemption explicitly, so we can use
smp_processor_id() instead of get_cpu() and put_cpu().
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <4D7EC791.4040003@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The distance transforming in numa_emulation() used to call
numa_set_distance() for all MAX_NUMNODES * MAX_NUMNODES node
combinations regardless of which are enabled. As numa_set_distance()
ignores all out-of-bound distance settings, this doesn't cause any
problem other than looping unnecessarily many times during boot.
However, as MAX_NUMNODES * MAX_NUMNODES can be pretty high, update the
code such that it iterates through only the enabled combinations.
Yinghai Lu identified the issue and provided an initial patch to
address the issue; however, the patch was incorrect in that it didn't
build emulated distance table when there's no physical distance table
and unnecessarily complex.
http://thread.gmane.org/gmane.linux.kernel/1107986/focus=1107988
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
It's forbidden to take the page_table_lock with the irq disabled
or if there's contention the IPIs (for tlb flushes) sent with
the page_table_lock held will never run leading to a deadlock.
Nobody takes the pgd_lock from irq context so the _irqsave can be
removed.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <201102162345.p1GNjMjm021738@imap1.linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
mm_fault_error() should not execute oom-killer, if page fault
occurs in kernel space. E.g. in copy_from_user()/copy_to_user().
This would happen if we find ourselves in OOM on a
copy_to_user(), or a copy_from_user() which faults.
Without this patch, the kernels hangs up in copy_from_user(),
because OOM killer sends SIG_KILL to current process, but it
can't handle a signal while in syscall, then the kernel returns
to copy_from_user(), reexcute current command and provokes
page_fault again.
With this patch the kernel return -EFAULT from copy_from_user().
The code, which checks that page fault occurred in kernel space,
has been copied from do_sigbus().
This situation is handled by the same way on powerpc, xtensa,
tile, ...
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <201103092322.p29NMNPH001682@imap1.linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Undetermined entries in emu_nid_to_phys[] are filled with zero
assuming that physical node 0 is always online; however, this might
not be true depending on hardware configuration. Find a physical node
which is actually online and use it instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1103020628210.31626@chino.kir.corp.google.com>
This crash happens on a system that does not have RAM on node0.
When numa_emulation is compiled in, and:
1. we boot the system without numa=fake...
2. or we boot the system with numa=fake=128 to make emulation fail
we will get:
[ 0.076025] ------------[ cut here ]------------
[ 0.080004] kernel BUG at arch/x86/mm/numa_64.c:788!
[ 0.080004] invalid opcode: 0000 [#1] SMP
[...]
need to use early_cpu_to_node() directly, because cpu_to_apicid
and apicid_to_node will return node0 that is not onlined.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
LKML-Reference: <4D6ECF72.5010308@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch cleans initmem_init() so that it is more readable and doesn't
use an unnecessary array of function pointers to convolute the flow of
the code. It also makes it obvious that dummy_numa_init() will always
succeed (and documents that requirement) so that the existing BUG() is
never actually reached.
No functional change.
-tj: Updated comment for dummy_numa_init() slightly.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch reverts NUMA affine page table allocation added by commit
1411e0ec31 (x86-64, numa: Put pgtable to local node memory).
The commit made an undocumented change where the kernel linear mapping
strictly follows intersection of e820 memory map and NUMA
configuration. If the physical memory configuration has holes or NUMA
nodes are not properly aligned, this leads to using unnecessarily
smaller mapping size which leads to increased TLB pressure. For
details,
http://thread.gmane.org/gmane.linux.kernel/1104672
Patches to fix the problem have been proposed but the underlying code
needs more cleanup and the approach itself seems a bit heavy handed
and it has been determined to revert the feature for now and come back
to it in the next developement cycle.
http://thread.gmane.org/gmane.linux.kernel/1105959
As init_memory_mapping_high() callsites have been consolidated since
the commit, reverting is done manually. Also, the RED-PEN comment in
arch/x86/mm/init.c is not restored as the problem no longer exists
with memblock based top-down early memory allocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Handling of out-of-bounds distances and allocation failure can use
better documentation. Add it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
NUMA distance table handling has the following problems.
* numa_reset_distance() uses numa_distance * sizeof(numa_distance[0])
as the table size when it should be using the square of
numa_distance.
* The same size miscalculation when allocation space for phys_dist in
numa_emulation().
* In numa_emulation(), phys_dist must be reserved; otherwise, the new
emulated distance table may overlap it.
Fix them and, while at it, take numa_distance_cnt resetting in
numa_reset_distance() out of the if block to simplify the code a bit.
David Rientjes reported incorrect handling of distance table during
emulation.
-tj: Edited out numa_alloc_distance() related changes which weren't
necessary and rewrote patch description.
-v2: Ingo was unhappy with 80-column limit induced linebreaks. Let
lines run over 80-column.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reported-by: David Rientjes <rientjes@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: David Rientjes <rientjes@google.com>
numa_distance should be sized like the SLIT, an NxN matrix where N is
the highest node id + 1. This patch fixes the calculation to avoid
overflowing the array on the subsequent iteration.
-tj: The original patch used last index to calculate size. Yinghai
pointed out it should be incremented so it is the number of
elements instead of the last index to calculate the size of the
table. Updated accordingly.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
e820_table_{start|end|top}, which are used to buffer page table
allocation during early boot, are now derived from memblock and don't
have much to do with e820. Change the names so that they reflect what
they're used for.
This patch doesn't introduce any behavior change.
-v2: Ingo found that earlier patch "x86: Use early pre-allocated page
table buffer top-down" caused crash on 32bit and needed to be
dropped. This patch was updated to reflect the change.
-tj: Updated commit description.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Alloc code is much bigger the distance setting. Separate it out into
numa_alloc_distance() for readability.
-v2: Let alloc_numa_distance to return -ENOMEM on failing path,
requested by tj.
-tj: Description update. Minor tweaks including function name,
location and return value check.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Create numa_emulation.c and move all NUMA emulation code there. The
definitions of struct numa_memblk and numa_meminfo are moved to
numa_64.h. Also, numa_remove_memblk_from(), numa_cleanup_meminfo(),
numa_reset_distance() along with numa_emulation() are made global.
- v2: Internal declarations moved to numa_internal.h as suggested by
Yinghai.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Update numa_emulation() such that, it
- takes @numa_meminfo and @numa_dist_cnt instead of directly
referencing the global variables.
- copies the distance table by iterating each distance with
node_distance() instead of memcpy'ing the distance table.
- tests emu_cmdline to determine whether emulation is requested and
fills emu_nid_to_phys[] with identity mapping if emulation is not
used. This allows the caller to call numa_emulation()
unconditionally and makes return value unncessary.
- defines dummy version if CONFIG_NUMA_EMU is disabled.
This patch doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
By the time setup_node_bootmem() is called, all the memblocks are
already registered. As node_data is allocated from these memblocks,
calling it more than once doesn't make any difference. Drop the loop.
tj: Dropped comment referencing to the old behavior as suggested by
David and rephrased the description.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
dummy_numa_init() is used only during system boot. Put it in .init
like other NUMA init functions.
- tj: Description update.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Do not call __pa(numa_distance) if it was not allocated before.
Calling with invalid address triggers VIRTUAL_BUG_ON() in
__phys_addr() if CONFIG_DEBUG_VIRTUAL.
Also reported by Ingo.
http://thread.gmane.org/gmane.linux.kernel/1101306/focus=1101785
- v2: Change to check existing path as tj requested.
- tj: Description update.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
NUMA emulation needs to update node distance information. It did it
by remapping apicid to PXM mapping, even when amdtopology is being
used. There is no reason to go through such convolution. The generic
code has all the information necessary to transform the distance table
to the emulated nid space.
Implement generic distance table transformation in numa_emulation()
and drop private implementations in srat_64 and amdtopology_64. This
makes find_node_by_addr() and fake_physnodes() and related functions
unnecessary, drop them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
NUMA emulation changes node mappings and thus apicid -> node mapping
needs to be updated accordingly. srat_64 and amdtopology_64 did this
separately; however, all the necessary information is the mapping from
emulated nodes to physical nodes which is available in
emu_nid_to_phys[].
Implement common __apicid_to_node[] transformation in numa_emulation()
and drop duplicate implementations.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
NUMA emulation built physnodes[] array which could only represent
configurations from the physical meminfo and emulated nodes using the
information. There's no reason to take this extra level of
indirection. Update emulation functions so that they operate directly
on numa_meminfo. This simplifies the code and makes emulation layout
behave better with interleaved physical nodes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Both emulation layout functions - split_nodes[_size]_interleave() -
didn't wrap emulated nid while laying out the fake nodes and tried to
avoid interating over the specified number of nodes, which is fragile.
Now that the emulation code generates numa_meminfo, the node memblks
don't need to be consecutive and emulated node IDs can simply wrap.
This makes the code more robust and is necessary for updates to better
handle the cases where the physical nodes are interleaved.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
NUMA emulation code built nodes[] array and had its own registration
path to set up the emulated nodes. Update it such that it generates
emulated numa_meminfo and returns control to initmem_init() and shares
the same registration path with non-emulated cases.
Because {acpi|amd}_fake_nodes() expect nodes[] parameter,
fake_physnodes() now generates nodes[] from numa_meminfo. This will
go away with further updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
NUMA emulation copied physical NUMA configuration into physnodes[] and
used it to reverse-map emulated nodes to physical nodes, which is
unnecessarily convoluted. Build emu_nid_to_phys[] array to map
emulated nids directly to the matching physical nids and use it in
numa_add_cpu().
physnodes[] will be removed with further patches.
- v2: Build failure when CONFIG_DEBUG_PER_CPU_MAPS due to missing
local variable definition fixed. Reported by Ingo.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
* Separate out numa_add_memblk_to() from numa_add_memblk() so that
different numa_meminfo can be used.
* Rename cmdline to emu_cmdline.
* Drop @start/last_pfn from numa_emulation() and use max_pfn directly.
This patch doesn't introduce any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Node distance either used direct node comparison, ACPI PXM comparison
or ACPI SLIT table lookup. This patch implements generic node
distance handling. NUMA init methods can call numa_set_distance() to
set distance between nodes and the common __node_distance()
implementation will report the set distance.
Due to the way NUMA emulation is implemented, the generic node
distance handling is used only when emulation is not used. Later
patches will update NUMA emulation to use the generic distance
mechanism.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
With all memory configuration information now carried in numa_meminfo,
there's no need to keep mem_nodes_parsed separate. Drop it and use
numa_nodes_parsed for CPU / memory-less nodes.
A new helper numa_nodemask_from_meminfo() is added to calculate
memnode mask on the fly which is currently used to set
node_possible_map.
This simplifies NUMA init methods a bit and removes a source of
possible inconsistencies.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
It's no longer necessary to keep both cpu_nodes_parsed and
mem_nodes_parsed. In preparation for merge, rename cpu_nodes_parsed
to numa_nodes_parsed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
numa_nodes[] doesn't carry any information which isn't present in
numa_meminfo. Each entry is simply min/max range of all the memblks
for the node. This is not only redundant but also inaccurate when
memblks for different nodes interleave - for example,
find_node_by_addr() can return the wrong nodeid.
Kill numa_nodes[] and always use numa_meminfo instead.
* nodes_cover_memory() is renamed to numa_meminfo_cover_memory() and
now operations on numa_meminfo and returns bool.
* setup_node_bootmem() needs min/max range. Compute the range on the
fly. setup_node_bootmem() invocation is restructured to use outer
loop instead of hardcoding the double invocations.
* find_node_by_addr() now operates on numa_meminfo.
* setup_physnodes() builds physnodes[] from memblks. This will go
away when emulation code is updated to use struct numa_meminfo.
This patch also makes the following misc changes.
* Clearing of nodes_add[] clearing is converted to memset().
* numa_add_memblk() in amd_numa_init() is moved down a bit for
consistency.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
srat_64.c and amdtopology_64.c had their own versions of
find_node_by_addr() which were basically the same. Add common one in
numa_64.c and remove the duplicates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
memblk sanity check was scattered around and incomplete. Consolidate
and improve.
* Confliction detection and cutoff_node() logic are moved to
numa_cleanup_meminfo().
* numa_cleanup_meminfo() clears the unused memblks before returning.
* Check and warn about invalid input parameters in numa_add_memblk().
* Check the maximum number of memblk isn't exceeded in
numa_add_memblk().
* numa_cleanup_meminfo() is now called before numa_emulation() so that
the emulation code also uses the cleaned up version.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
* Factor out numa_remove_memblk_from().
* Hole detection doesn't need separate start/end. Calculate start/end
once.
* Relocate comment.
* Define iterators at the top and remove unnecessary prefix
increments.
This prepares for further improvements to the function.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Separate out numa_cleanup_meminfo() from numa_register_memblks().
node_possible_map initialization is moved to the top of the split
numa_register_memblks().
This patch doesn't cause behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Arrays for memblks and nodeids and their length lived in separate
variables making things unnecessarily cumbersome. Introduce struct
numa_meminfo which contains all memory configuration info. This patch
doesn't cause any behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
numa_emulation() called compute_hash_shift() with %NULL @nodeids which
meant identity mapping between index and nodeid. Make
numa_emulation() build identity array and drop %NULL @nodeids handling
from populate_memnodemap() and thus from compute_hash_shift(). This
is to prepare for transition to using memblks instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Move the remaining memblk registration logic from acpi_scan_nodes() to
numa_register_memblks() and initmem_init().
This applies nodes_cover_memory() sanity check, memory node sorting
and node_online() checking, which were only applied to acpi, to all
init methods.
As all memblk registration is moved to common code, active range
clearing is moved to initmem_init() too and removed from bad_srat().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Make both amd and dummy use numa_add_memblk() to describe the detected
memory blocks. This allows initmem_init() to call
numa_register_memblk() regardless of init method in use. Drop custom
memory registration codes from amd and dummy.
After this change, memblk merge/cleanup in numa_register_memblks() is
applied to all init methods.
As this makes compute_hash_shift() and numa_register_memblks() used
only inside numa_64.c, make them static.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Factor out memblk handling from srat_64.c into two functions in
numa_64.c. This patch doesn't introduce any behavior change. The
next patch will make all init methods use these functions.
- v2: Fixed build failure on 32bit due to misplaced NR_NODE_MEMBLKS.
Reported by Ingo.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
With common numa_nodes[], common code in numa_64.c can access it
directly. Copy directly and kill {acpi|amd}_get_nodes().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
ACPI and amd are using separate nodes[] array. Add numa_nodes[] and
use them in all NUMA init methods. cutoff_node() cleanup is moved
from srat_64.c to numa_64.c and applied in initmem_init() regardless
of init methods.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
This brings amd initialization behavior closer to that of acpi.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
ACPI and amd are using separate nodes_parsed masks. Add
{cpu|mem}_nodes_parsed and use them in all NUMA init methods.
Initialization of the masks and building node_possible_map are now
handled commonly by initmem_init().
dummy_numa_init() is updated to set node 0 on both masks. While at
it, move the info messages from scan to init.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Reorganize initmem_init() such that,
* Different NUMA init methods are iterated in a consistent way.
* Each iteration re-initializes all the parameters and different
method can be tried after a failure.
* Dummy init is handled the same as other methods.
Apart from how retry after failure, this patch doesn't change the
behavior. The call sequences are kept equivalent across the
conversion.
After the change, bad_srat() doesn't need to clear apic to node
mapping or worry about numa_off. Simplified accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
There's no reason for these to live in setup_arch(). Move them inside
initmem_init().
- v2: x86-32 initmem_init() weren't updated breaking 32bit builds.
Fixed. Found by Ankita.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Because of the way ACPI tables are parsed, the generic
acpi_numa_init() couldn't return failure when error was detected by
arch hooks. Instead, the failure state was recorded and later arch
dependent init hook - acpi_scan_nodes() - would fail.
Wrap acpi_numa_init() with x86_acpi_numa_init() so that failure can be
indicated as return value immediately. This is in preparation for
further NUMA init cleanups.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
The functions used during NUMA initialization - *_numa_init() and
*_scan_nodes() - have different arguments and return values. Unify
them such that they all take no argument and return 0 on success and
-errno on failure. This is in preparation for further NUMA init
cleanups.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
initmem_init() extensively accesses and modifies global data
structures and the parameters aren't even followed depending on which
path is being used. Drop @start/last_pfn and let it deal with
@max_pfn directly. This is in preparation for further NUMA init
cleanups.
- v2: x86-32 initmem_init() weren't updated breaking 32bit builds.
Fixed. Found by Yinghai.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Hotplug node handling in acpi_numa_memory_affinity_init() was
unnecessarily complicated with storing the original nodes[] entry and
restoring it afterwards. Simplify it by not modifying the nodes[]
entry for hotplug nodes from the beginning.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Dummy node initialization in initmem_init() didn't initialize apicid
to node mapping and set cpu to node mapping directly by caling
numa_set_node(), which is different from non-dummy init paths.
Update it such that they behave similarly. Initialize apicid to node
mapping and call numa_init_array(). The actual cpu to node mapping is
handled by init_cpu_to_node() later.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@linux.intel.com>
CONFIG_DEBUG_PER_CPU_MAPS may return NUMA_NO_NODE when an
early_cpu_to_node() mapping hasn't been initialized. In such a
case, it emits a warning and continues without an issue but
callers may try to use the return value to index into an array.
We can catch those errors and fail silently since a warning has
already been emitted. No current user of numa_add_cpu()
requires this error checking to avoid a crash, but it's better
to be proactive in case a future user happens to have a bug and
a user tries to diagnose it with CONFIG_DEBUG_PER_CPU_MAPS.
Reported-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <alpine.DEB.2.00.1102071407250.7812@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This one isn't related to previous patch. If online cpus are
below NUM_INVALIDATE_TLB_VECTORS, we don't need the lock. The
comments in the code declares we don't need the check, but a hot
lock still needs an atomic operation and expensive, so add the
check here.
Uses nr_cpu_ids here as suggested by Eric Dumazet.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <1295232730.1949.710.camel@sli10-conroe>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Conflicts:
arch/x86/mm/numa_64.c
Merge reason: fix the conflict, update to latest -rc and pick up this
dependent fix from Yinghai:
e6d2e2b2b1: memblock: don't adjust size in memblock_find_base()
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Define a version of memory_block_size_bytes for x86_64 when CONFIG_X86_UV is
set.
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Xen want page table pages read only.
But the initial page table (from head_*.S) live in .data or .bss.
That was broken by 64edc8ed5f. There is
absolutely no reason to force these pages RW after they have already
been marked RO.
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Now that everything else is unified, NUMA initialization can be
unified too.
* numa_init_array() and init_cpu_to_node() are moved from
numa_64 to numa.
* numa_32::initmem_init() is updated to call numa_init_array()
and setup_arch() to call init_cpu_to_node() on 32bit too.
* x86_cpu_to_node_map is now initialized to NUMA_NO_NODE on
32bit too. This is safe now as numa_init_array() will initialize
it early during boot.
This makes NUMA mapping fully initialized before
setup_per_cpu_areas() on 32bit too and thus makes the first
percpu chunk which contains all the static variables and some of
dynamic area allocated with NUMA affinity correctly considered.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-17-git-send-email-tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
x86_32 has been managing node_to_cpumask_map explicitly from
map_cpu_to_node() and friends in a rather ugly way. With
previous changes, it's now possible to share the code with
64bit.
* When CONFIG_NUMA_EMU is disabled, numa_add/remove_cpu() are
implemented in numa.c and shared by 32 and 64bit. CONFIG_NUMA_EMU
versions still live in numa_64.c.
NUMA_EMU's dependency on 64bit is planned to be removed and the
above should go away together.
* identify_cpu() now calls numa_add_cpu() for 32bit too. This
makes the explicit mask management from map_cpu_to_node() unnecessary.
* The whole x86_32 specific map_cpu_to_node() chunk is no longer
necessary. Dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-16-git-send-email-tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>
Cc: Shaohui Zheng <shaohui.zheng@intel.com>
Unlike 64bit, 32bit has been using its own cpu_to_node_map[] for
CPU -> NUMA node mapping. Replace it with early_percpu variable
x86_cpu_to_node_map and share the mapping code with 64bit.
* USE_PERCPU_NUMA_NODE_ID is now enabled for 32bit too.
* x86_cpu_to_node_map and numa_set/clear_node() are moved from
numa_64 to numa. For now, on 32bit, x86_cpu_to_node_map is initialized
with 0 instead of NUMA_NO_NODE. This is to avoid introducing unexpected
behavior change and will be updated once init path is unified.
* srat_detect_node() is now enabled for x86_32 too. It calls
numa_set_node() and initializes the mapping making explicit
cpu_to_node_map[] updates from map/unmap_cpu_to_node() unnecessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: penberg@kernel.org
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-15-git-send-email-tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>
The mapping between cpu/apicid and node is done via
apicid_to_node[] on 64bit and apicid_2_node[] +
apic->x86_32_numa_cpu_node() on 32bit. This difference makes it
difficult to further unify 32 and 64bit NUMA handling.
This patch unifies it by replacing both apicid_to_node[] and
apicid_2_node[] with __apicid_to_node[] array, which is accessed
by two accessors - set_apicid_to_node() and numa_cpu_node(). On
64bit, numa_cpu_node() always consults __apicid_to_node[]
directly while 32bit goes through apic->numa_cpu_node() method
to allow apic implementations to override it.
srat_detect_node() for amd cpus contains workaround for broken
NUMA configuration which assumes relationship between APIC ID,
HT node ID and NUMA topology. Leave it to access
__apicid_to_node[] directly as mapping through CPU might result
in undesirable behavior change. The comment is reformatted and
updated to note the ugliness.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-14-git-send-email-tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>
In order to be able to suppress the use of SRAT tables that
32-bit Linux can't deal with (in one case known to lead to a
non-bootable system, unless disabling ACPI altogether), move the
"numa=" option handling to common code.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Renninger <trenn@suse.de>
LKML-Reference: <4D36B581020000780002D0FF@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For GRU and EPT, we need gup-fast to set referenced bit too (this is why
it's correct to return 0 when shadow_access_mask is zero, it requires
gup-fast to set the referenced bit). qemu-kvm access already sets the
young bit in the pte if it isn't zero-copy, if it's zero copy or a shadow
paging EPT minor fault we relay on gup-fast to signal the page is in
use...
We also need to check the young bits on the secondary pagetables for NPT
and not nested shadow mmu as the data may never get accessed again by the
primary pte.
Without this closer accuracy, we'd have to remove the heuristic that
avoids collapsing hugepages in hugepage virtual regions that have not even
a single subpage in use.
->test_young is full backwards compatible with GRU and other usages that
don't have young bits in pagetables set by the hardware and that should
nuke the secondary mmu mappings when ->clear_flush_young runs just like
EPT does.
Removing the heuristic that checks the young bit in
khugepaged/collapse_huge_page completely isn't so bad either probably but
I thought it was worth it and this makes it reliable.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for transparent hugepages to x86 32bit.
Share the same VM_ bitflag for VM_MAPPED_COPY. mm/nommu.c will never
support transparent hugepages.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Force gup_fast to take the slow path and block if the pmd is splitting,
not only if it's none.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add needed pmd mangling functions with symmetry with their pte
counterparts. pmdp_splitting_flush() is the only new addition on the pmd_
methods and it's needed to serialize the VM against split_huge_page. It
simply atomically sets the splitting bit in a similar way
pmdp_clear_flush_young atomically clears the accessed bit.
pmdp_splitting_flush() also has to flush the tlb to make it effective
against gup_fast, but it wouldn't really require to flush the tlb too.
Just the tlb flush is the simplest operation we can invoke to serialize
pmdp_splitting_flush() against gup_fast.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alter compound get_page/put_page to keep references on subpages too, in
order to allow __split_huge_page_refcount to split an hugepage even while
subpages have been pinned by one of the get_user_pages() variants.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, olpc: Speed up device tree creation during boot
x86, olpc: Add OLPC device-tree support
x86, of: Define irq functions to allow drivers/of/* to build on x86
Conflicts:
arch/x86/include/asm/io_apic.h
Merge reason: Resolve the conflict, update to a more recent -rc base
Signed-off-by: Ingo Molnar <mingo@elte.hu>
"x86, numa: Fake node-to-cpumask for NUMA emulation" broke the
build when CONFIG_DEBUG_PER_CPU_MAPS is set and CONFIG_NUMA_EMU
is not. This is because it is possible to map a cpu to multiple
nodes when NUMA emulation is used; the patch required a physical
node address table to find those nodes that was only available
when CONFIG_NUMA_EMU was enabled.
This extracts the common debug functionality to its own function
for CONFIG_DEBUG_PER_CPU_MAPS and uses it regardless of whether
CONFIG_NUMA_EMU is set or not.
NUMA emulation will now iterate over the set of possible nodes
for each cpu and call the new debug function whereas only the
cpu's node will be used without NUMA emulation enabled.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <alpine.DEB.2.00.1012301053590.12995@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
module: Move RO/NX module protection to after ftrace module update
x86: Resume trampoline must be executable
x86: Add RO/NX protection for loadable kernel modules
x86: Add NX protection for kernel data
x86: Fix improper large page preservation
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix included-by file reference comments
x86, cpu: Only CPU features determine NX capabilities
x86, cpu: Call verify_cpu during 32bit CPU startup
x86, cpu: Clear XD_DISABLED flag on Intel to regain NX
x86, cpu: Rename verify_cpu_64.S to verify_cpu.S
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion
x86, acpi: Parse all SRAT cpu entries even above the cpu number limitation
x86, acpi: Add MAX_LOCAL_APIC for 32bit
x86: io_apic: Split setup_ioapic_ids_from_mpc()
x86: io_apic: Fix CONFIG_X86_IO_APIC=n breakage
x86: apic: Move probe_nr_irqs_gsi() into ioapic_init_mappings()
x86: Allow platforms to force enable apic
* 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, cacheinfo: Cleanup L3 cache index disable support
x86, amd-nb: Cleanup AMD northbridge caching code
x86, amd-nb: Complete the rename of AMD NB and related code
It is not related to init_memory_mapping(), and init_memory_mapping() is
getting more bigger.
So make it as seperated function and call it from reserve_brk() and that is
point when _brk_end is concluded.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933E0.7090305@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
We need to access it right way, so make sure that it is mapped already.
Prepare to put page table on local node, and nodemap is used before that.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D1933C8.7060105@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
While dubug kdump, found current kernel will have problem with crashkernel=512M.
It turns out that initial mapping is to 512M, and later initial mapping to 4G
(acutally is 2040M in my platform), will put page table near 512M.
then initial mapping to 128g will be near 2g.
before this patch:
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff]
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] 007f600000 - 007f750000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f750000 @ [0x1fffc000-0x1fffffff]
[ 0.000000] memblock_x86_reserve_range: [0x1fffc000-0x1fffdfff] PGTABLE
[ 0.000000] init_memory_mapping: [0x00000100000000-0x0000207fffffff]
[ 0.000000] 0100000000 - 2080000000 page 2M
[ 0.000000] kernel direct mapping tables up to 2080000000 @ [0x7bc01000-0x7bc83fff]
[ 0.000000] memblock_x86_reserve_range: [0x7bc01000-0x7bc7efff] PGTABLE
[ 0.000000] RAMDISK: 7bc84000 - 7f745000
[ 0.000000] crashkernel reservation failed - No suitable area found.
after patch:
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: [0x00000000000000-0x0000007f74ffff]
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] 007f600000 - 007f750000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f750000 @ [0x7f74c000-0x7f74ffff]
[ 0.000000] memblock_x86_reserve_range: [0x7f74c000-0x7f74dfff] PGTABLE
[ 0.000000] init_memory_mapping: [0x00000100000000-0x0000207fffffff]
[ 0.000000] 0100000000 - 2080000000 page 2M
[ 0.000000] kernel direct mapping tables up to 2080000000 @ [0x207ff7d000-0x207fffffff]
[ 0.000000] memblock_x86_reserve_range: [0x207ff7d000-0x207fffafff] PGTABLE
[ 0.000000] RAMDISK: 7bc84000 - 7f745000
[ 0.000000] memblock_x86_reserve_range: [0x17000000-0x36ffffff] CRASH KERNEL
[ 0.000000] Reserving 512MB of memory at 368MB for crashkernel (System RAM: 133120MB)
It means with the patch, page table for [0, 2g) will need 2g, instead of under 512M,
page table for [4g, 128g) will be near 128g, instead of under 2g.
That would good, if we have lots of memory above 4g, like 1024g, or 2048g or 16T, will not put
related page table under 2g. that would be have chance to fill the under 2g if 1G or 2M page is
not used.
the code change will use add map_low_page() and update unmap_low_page() for 64bit, and use them
to get access the corresponding high memory for page table setting.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D0C0734.7060900@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
NUMA boot code assumes that physical node ids start at 0, but the DIMMs
that the apic id represents may not be reachable. If this is the case,
node 0 is never online and cpus never end up getting appropriately
assigned to a node. This causes the cpumask of all online nodes to be
empty and machines crash with kernel code assuming online nodes have
valid cpus.
The fix is to appropriately map all the address ranges for physical nodes
and ensure the cpu to node mapping function checks all possible nodes (up
to MAX_NUMNODES) instead of simply checking nodes 0-N, where N is the
number of physical nodes, for valid address ranges.
This requires no longer "compressing" the address ranges of nodes in the
physical node map from 0-N, but rather leave indices in physnodes[] to
represent the actual node id of the physical node. Accordingly, the
topology exported by both amd_get_nodes() and acpi_get_nodes() no longer
must return the number of nodes to iterate through; all such iterations
will now be to MAX_NUMNODES.
This change also passes the end address of system RAM (which may be
different from normal operation if mem= is specified on the command line)
before the physnodes[] array is populated. ACPI parsed nodes are
truncated to fit within the address range that respect the mem=
boundaries and even some physical nodes may become unreachable in such
cases.
When NUMA emulation does succeed, any apicid to node mapping that exists
for unreachable nodes are given default values so that proximity domains
can still be assigned. This is important for node_distance() to
function as desired.
Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221702090.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
It's necessary to fake the node-to-cpumask mapping so that an emulated
node ID returns a cpumask that includes all cpus that have affinity to
the memory it represents.
This is a little intrusive because it requires knowledge of the physical
topology of the system. setup_physnodes() gives us that information, but
since NUMA emulation ends up altering the physnodes array, it's necessary
to reset it before cpus are brought online.
Accordingly, the physnodes array is moved out of init.data and into
cpuinit.data since it will be needed on cpuup callbacks.
This works regardless of whether numa=fake is used on the command line,
or the setup of the fake node succeeds or fails. The physnodes array
always contains the physical topology of the machine if CONFIG_NUMA_EMU
is enabled and can be used to setup the correct node-to-cpumask mappings
in all cases since setup_physnodes() is called whenever the array needs
to be repopulated with the correct data.
To fake the actual mappings, numa_add_cpu() and numa_remove_cpu() are
rewritten for CONFIG_NUMA_EMU so that we first find the physical node to
which each cpu has local affinity, then iterate through all online nodes
to find the emulated nodes that have local affinity to that physical
node, and then finally map the cpu to each of those emulated nodes.
Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701520.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch adds the equivalent of acpi_fake_nodes() for AMD Northbridge
platforms. The goal is to fake the apicid-to-node mappings for NUMA
emulation so the physical topology of the machine is correctly maintained
within the kernel.
This change also fakes proximity domains for both ACPI and k8 code so the
physical distance between emulated nodes is maintained via
node_distance(). This exports the correct distances via
/sys/devices/system/node/.../distance based on the underlying topology.
A new helper function, fake_physnodes(), is introduced to correctly
invoke the correct NUMA code to fake these two mappings based on the
system type. If there is no underlying NUMA configuration, all cpus are
mapped to node 0 for local distance.
Since acpi_fake_nodes() is no longer called with CONFIG_ACPI_NUMA, it's
prototype can be removed from the header file for such a configuration.
Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701360.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Both acpi_get_nodes() and amd_get_nodes() are only necessary when
CONFIG_NUMA_EMU is enabled, so avoid compiling them when the option is
disabled.
Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701210.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Recent Intel new system have different order in MADT, aka will list all thread0
at first, then all thread1.
But SRAT table still old order, it will list cpus in one socket all together.
If the user have compiled limited NR_CPUS or boot with nr_cpus=, could have missed
to put some cpus apic id to node mapping into apicid_to_node[].
for example for 4 sockets system with 64 cpus with nr_cpus=32 will get crash...
[ 9.106288] Total of 32 processors activated (136190.88 BogoMIPS).
[ 9.235021] divide error: 0000 [#1] SMP
[ 9.235315] last sysfs file:
[ 9.235481] CPU 1
[ 9.235592] Modules linked in:
[ 9.245398]
[ 9.245478] Pid: 2, comm: kthreadd Not tainted 2.6.37-rc1-tip-yh-01782-ge92ef79-dirty #274 /Sun Fire x4800
[ 9.265415] RIP: 0010:[<ffffffff81075a8f>] [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
...
[ 9.645938] RIP [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
[ 9.665356] RSP <ffff88103f8d1c40>
[ 9.665568] ---[ end trace 2296156d35fdfc87 ]---
So let just parse all cpu entries in SRAT.
Also add apicid checking with MAX_LOCAL_APIC, in case We could out of boundaries of
apicid_to_node[].
it fixes following bug too.
https://bugzilla.kernel.org/show_bug.cgi?id=22662
-v2: expand to 32bit according to hpa
need to add MAX_LOCAL_APIC for 32bit
Reported-and-Tested-by: Wu Fengguang <fengguang.wu@intel.com>
Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Tested-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D0AD486.9020704@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Make use of PROC_DEVICETREE to export the tree, and sparc's PROMTREE code to
call into OLPC's Open Firmware to build the tree.
v5: fix buglet with root node check (introduced in v4)
v4: address some minor style issues pointed out by Grant, and explicitly cast
negative phandle checks to s32.
v3: rename olpc_prom to olpc_dt
- rework Kconfig entries
- drop devtree build hook from proc, instead adding a call to x86's
paging_init (similarly to how sparc64 does it)
- switch allocation from using slab to alloc_bootmem. this allows
the DT to be built earlier during boot (during setup_arch); the
downside is that there are some 1200 bootmem reservations that are
done during boot. Not ideal..
- add a helper olpc_ofw_is_installed function to test for the
existence and successful detection of OLPC's OFW.
Signed-off-by: Andres Salomon <dilinger@queued.net>
LKML-Reference: <20101116220952.26526a80@queued.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
It is almost the same as smp_register_lapic_addr(). We just need to
let smp_read_mpc() call smp_register_lapic_addr() when early==1.
Add the apic_printk to smp_register_lapic_address()
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4CFDF681.3030509@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
commit 5bd5a452(x86: Add NX protection for kernel data) marked the
trampoline area NX - which unsurprisingly breaks resume and cpu
hotplug.
Revert the portion of that commit, which touches the trampoline.
Originally-from: Lin Ming <ming.m.lin@intel.com>
LKML-Reference: <1290410581.2405.24.camel@minggr.sh.intel.com>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Cc: Siarhei Liakh <sliakh.lkml@gmail.com>
Cc: Xuxian Jiang <jiang@cs.ncsu.edu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Tested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Not only the naming of the files was confusing, it was even more so for
the function and variable names.
Renamed the K8 NB and NUMA stuff that is also used on other AMD
platforms. This also renames the CONFIG_K8_NUMA option to
CONFIG_AMD_NUMA and the related file k8topology_64.c to
amdtopology_64.c. No functional changes intended.
Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
The various stack tracing routines take a 'bp' argument in which the
caller is supposed to provide the base pointer to use, or 0 if doesn't
have one. Since bp is garbage whenever CONFIG_FRAME_POINTER is not
defined, this means all callers in principle should either always pass
0, or be conditional on CONFIG_FRAME_POINTER.
However, there are only really three use cases for stack tracing:
(a) Trace the current task, including IRQ stack if any
(b) Trace the current task, but skip IRQ stack
(c) Trace some other task
In all cases, if CONFIG_FRAME_POINTER is not defined, bp should just
be 0. If it _is_ defined, then
- in case (a) bp should be gotten directly from the CPU's register, so
the caller should pass NULL for regs,
- in case (b) the caller should should pass the IRQ registers to
dump_trace(),
- in case (c) bp should be gotten from the top of the task's stack, so
the caller should pass NULL for regs.
Hence, the bp argument is not necessary because the combination of
task and regs is sufficient to determine an appropriate value for bp.
This patch introduces a new inline function stack_frame(task, regs)
that computes the desired bp. This function is then called from the
two versions of dump_stack().
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arjan van de Ven <arjan@infradead.org>,
Cc: Frederic Weisbecker <fweisbec@gmail.com>,
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>,
LKML-Reference: <m3oc9rop28.fsf@dhcp-100-3-82.bos.redhat.com>>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This patch expands functionality of CONFIG_DEBUG_RODATA to set main
(static) kernel data area as NX.
The following steps are taken to achieve this:
1. Linker script is adjusted so .text always starts and ends on a page bound
2. Linker script is adjusted so .rodata always start and end on a page boundary
3. NX is set for all pages from _etext through _end in mark_rodata_ro.
4. free_init_pages() sets released memory NX in arch/x86/mm/init.c
5. bios rom is set to x when pcibios is used.
The results of patch application may be observed in the diff of kernel page
table dumps:
pcibios:
-- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400
++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400
0x00000000-0xc0000000 3G pmd
---[ Kernel Mapping ]---
-0xc0000000-0xc0100000 1M RW GLB x pte
+0xc0000000-0xc00a0000 640K RW GLB NX pte
+0xc00a0000-0xc0100000 384K RW GLB x pte
-0xc0100000-0xc03d7000 2908K ro GLB x pte
+0xc0100000-0xc0318000 2144K ro GLB x pte
+0xc0318000-0xc03d7000 764K ro GLB NX pte
-0xc03d7000-0xc0600000 2212K RW GLB x pte
+0xc03d7000-0xc0600000 2212K RW GLB NX pte
0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd
0xf7a00000-0xf7bfe000 2040K RW GLB NX pte
0xf7bfe000-0xf7c00000 8K pte
No pcibios:
-- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400
++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400
0x00000000-0xc0000000 3G pmd
---[ Kernel Mapping ]---
-0xc0000000-0xc0100000 1M RW GLB x pte
+0xc0000000-0xc0100000 1M RW GLB NX pte
-0xc0100000-0xc03d7000 2908K ro GLB x pte
+0xc0100000-0xc0318000 2144K ro GLB x pte
+0xc0318000-0xc03d7000 764K ro GLB NX pte
-0xc03d7000-0xc0600000 2212K RW GLB x pte
+0xc03d7000-0xc0600000 2212K RW GLB NX pte
0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd
0xf7a00000-0xf7bfe000 2040K RW GLB NX pte
0xf7bfe000-0xf7c00000 8K pte
The patch has been originally developed for Linux 2.6.34-rc2 x86 by
Siarhei Liakh <sliakh.lkml@gmail.com> and Xuxian Jiang <jiang@cs.ncsu.edu>.
-v1: initial patch for 2.6.30
-v2: patch for 2.6.31-rc7
-v3: moved all code into arch/x86, adjusted credits
-v4: fixed ifdef, removed credits from CREDITS
-v5: fixed an address calculation bug in mark_nxdata_nx()
-v6: added acked-by and PT dump diff to commit log
-v7: minor adjustments for -tip
-v8: rework with the merge of "Set first MB as RW+NX"
Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com>
Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu>
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: James Morris <jmorris@namei.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dave Jones <davej@redhat.com>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CE2F82E.60601@free.fr>
[ minor cleanliness edits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch fixes a bug in try_preserve_large_page() which may
result in improper large page preservation and improper
application of page attributes to the memory area outside of the
original change request.
More specifically, the problem manifests itself when set_memory_*()
is called for several pages at the beginning of the large page and
try_preserve_large_page() erroneously concludes that the change can
be applied to whole large page.
The fix consists of 3 parts:
1. Addition of "required" protection attributes in
static_protections(), so .data and .bss can be guaranteed to
stay "RW"
2. static_protections() is now called for every small
page within large page to determine compatibility of new
protection attributes (instead of just small pages within the
requested range).
3. Large page can be preserved only if attribute change is
large-page-aligned and covers whole large page.
-v1: Try_preserve_large_page() patch for Linux 2.6.34-rc2
-v2: Replaced pfn check with address check for kernel rw-data
Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com>
Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu>
Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: James Morris <jmorris@namei.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dave Jones <davej@redhat.com>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CE2F7F3.8030809@free.fr>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Found a NUMA system that doesn't have RAM installed at the first
socket which hangs while executing init scripts.
bisected it to:
| commit 9329672021
| Author: Shaohua Li <shaohua.li@intel.com>
| Date: Wed Oct 20 11:07:03 2010 +0800
|
| x86: Spread tlb flush vector between nodes
It turns out when first socket is not online it could have cpus on
node1 tlb_offset set to bigger than NUM_INVALIDATE_TLB_VECTORS.
That could affect systems like 4 sockets, but socket 2 doesn't
have installed, sockets 3 will get too big tlb_offset.
Need to use real online node idx.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CDEDE59.40603@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix the NX feature boot warning when NX is missing to correctly
reflect that BIOSes cannot disable NX now.
Signed-off-by: Kees Cook <kees.cook@canonical.com>
LKML-Reference: <1289414154-7829-5-git-send-email-kees.cook@canonical.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Mark tlb_cpuhp_notify as __cpuinit. It's basically a callback
function, which is called from __cpuinit init_smp_flash(). So -
it's safe.
We were warned by the following warning:
WARNING: arch/x86/mm/built-in.o(.text+0x356d): Section mismatch
in reference from the function tlb_cpuhp_notify() to the
function .cpuinit.text:calculate_tlb_offset()
The function tlb_cpuhp_notify() references
the function __cpuinit calculate_tlb_offset().
This is often because tlb_cpuhp_notify lacks a __cpuinit
annotation or the annotation of calculate_tlb_offset is wrong.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <AANLkTinWQRG=HA9uB3ad0KAqRRTinL6L_4iKgF84coph@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, alternative: Call stop_machine_text_poke() on all cpus
x86-32: Restore irq stacks NUMA-aware allocations
x86, memblock: Fix early_node_mem with big reserved region.
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, uv: More Westmere support on SGI UV
x86, uv: Enable Westmere support on SGI UV
Xen can reserve huge amounts of memory for pre-ballooning, but that
still shows as RAM in the e820 memory map. early_node_mem could not
find range because of start/end adjusting, and will go through the
fallback path. However, the fallback patch is still using
memblock_x86_find_range_node(), and it is partially top-down because
it go through active_range entries from low to high.
Let's use memblock_find_in_range instead memblock_x86_find_range_node.
So get real top down in fallback path.
We may still need to make memblock_x86_find_range_node to do overall
top_down work.
Reported-by: Jeremy Fitzhardinge <jeremy@goop.org>
Tested-by: Jeremy Fitzhardinge <jeremy@goop.org>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CC9A9C9.8020700@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Christoph reported a nice splat which illustrated a race in the new stack
based kmap_atomic implementation.
The problem is that we pop our stack slot before we're completely done
resetting its state -- in particular clearing the PTE (sometimes that's
CONFIG_DEBUG_HIGHMEM). If an interrupt happens before we actually clear
the PTE used for the last slot, that interrupt can reuse the slot in a
dirty state, which triggers a BUG in kmap_atomic().
Fix this by introducing kmap_atomic_idx() which reports the current slot
index without actually releasing it and use that to find the PTE and delay
the _pop() until after we're completely done.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
access_error() already takes error_code as an argument, so there is
no need for an additional write flag.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This change reduces mmap_sem hold times that are caused by waiting for
disk transfers when accessing file mapped VMAs.
It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call
site wants mmap_sem to be released if blocking on a pending disk transfer.
In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and
do_page_fault() will then re-acquire mmap_sem and retry the page fault.
It is expected that the retry will hit the same page which will now be
cached, and thus it will complete with a low mmap_sem hold time.
Tests:
- microbenchmark: thread A mmaps a large file and does random read accesses
to the mmaped area - achieves about 55 iterations/s. Thread B does
mmap/munmap in a loop at a separate location - achieves 55 iterations/s
before, 15000 iterations/s after.
- We are seeing related effects in some applications in house, which show
significant performance regressions when running without this change.
[akpm@linux-foundation.org: fix warning & crash]
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
