Code indentation should use tabs where possible.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_31E6ACADCB6915E157CF5113C41803212107@qq.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nested_vmx_check_controls() has already run by the time KVM checks host state,
so the "host address space size" exit control can only be set on x86-64 hosts.
Simplify the condition at the cost of adding some dead code to 32-bit kernels.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The effective values of the guest CR0 and CR4 registers may differ from
those included in the VMCS12. In particular, disabling EPT forces
CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1.
Therefore, checks on these bits cannot be delegated to the processor
and must be performed by KVM.
Reported-by: Reima ISHII <ishiir@g.ecc.u-tokyo.ac.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A single patch to address a rather annoying bug w.r.t. guest timer
offsetting. Effectively the synchronization of timer offsets between
vCPUs was broken, leading to inconsistent timer reads within the VM.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZAzwRwAKCRCivnWIJHzd
Fh0nAP4seI9aMrv0EnCHS9nufCSYQZYGBxOe+8EyUOIERxyCPgEAspn6fNJWnc6o
RWbFGMyNHPgeQgGjH+g4ehqh5LSeMww=
=uFU2
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #1
A single patch to address a rather annoying bug w.r.t. guest timer
offsetting. Effectively the synchronization of timer offsets between
vCPUs was broken, leading to inconsistent timer reads within the VM.
The RTAS work area allocator uses code that is built by
GENERIC_ALLOCATOR, so the PSERIES Kconfig should select the
required Kconfig symbol to fix multiple build errors.
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_allocator_init':
rtas-work-area.c:(.init.text+0x288): undefined reference to `.gen_pool_create'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x2dc): undefined reference to `.gen_pool_set_algo'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x310): undefined reference to `.gen_pool_add_owner'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x43c): undefined reference to `.gen_pool_destroy'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o:(.toc+0x0): undefined reference to `gen_pool_first_fit_order_align'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.__rtas_work_area_alloc':
rtas-work-area.c:(.ref.text+0x14c): undefined reference to `.gen_pool_alloc_algo_owner'
powerpc64-linux-ld: rtas-work-area.c:(.ref.text+0x238): undefined reference to `.gen_pool_alloc_algo_owner'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_free':
rtas-work-area.c:(.ref.text+0x44c): undefined reference to `.gen_pool_free_owner'
Fixes: 43033bc62d ("powerpc/pseries: add RTAS work area allocator")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
A recent commit eliminated a hack that adjusted the offset used for
many GSI registers. It became possible because we now specify all
GSI register offsets explicitly for every version of IPA.
Unfortunately, a large number of register offsets were *not* updated
as they should have been in that commit. For IPA v4.5+, the offset
for every GSI register *except* the two inter-EE interrupt masking
registers were supposed to have been reduced by 0xd000.
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK
Fixes: 59b12b1d27 ("net: ipa: kill gsi->virt_raw")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230310193709.1477102-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As my testing on the MCM MT7530 switch on MT7621 SoC shows, setting the PLL
frequency does not affect MII modes other than trgmii on port 5 and port 6.
So the assumption is that the operation here called "setting the PLL
frequency" actually sets the frequency of the TRGMII TX clock.
Make it so that it and the rest of the trgmii setup run only when the
trgmii mode is used.
Tested rgmii and trgmii modes of port 6 on MCM MT7530 on MT7621AT Unielec
U7621-06 and standalone MT7530 on MT7623NI Bananapi BPI-R2.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230310073338.5836-2-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove now incorrect comment regarding port 5 as GMAC5. This is supposed to
be supported since commit 38f790a805 ("net: dsa: mt7530: Add support for
port 5") under mt7530_setup_port5().
Fixes: 38f790a805 ("net: dsa: mt7530: Add support for port 5")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230310073338.5836-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously we would divide total_left_rate by zero if num_vports
happened to be 1 because non_requested_count is calculated as
num_vports - req_count. Guard against this by validating num_vports at
the beginning and returning an error otherwise.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes: bcd197c81f ("qed: Add vport WFQ configuration APIs")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309201556.191392-1-d-tatianin@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When performing a stress test on SMC-R by rmmod mlx5_ib driver
during the wrk/nginx test, we found that there is a probability
of triggering a panic while terminating all link groups.
This issue dues to the race between smc_smcr_terminate_all()
and smc_buf_create().
smc_smcr_terminate_all
smc_buf_create
/* init */
conn->sndbuf_desc = NULL;
...
__smc_lgr_terminate
smc_conn_kill
smc_close_abort
smc_cdc_get_slot_and_msg_send
__softirqentry_text_start
smc_wr_tx_process_cqe
smc_cdc_tx_handler
READ(conn->sndbuf_desc->len);
/* panic dues to NULL sndbuf_desc */
conn->sndbuf_desc = xxx;
This patch tries to fix the issue by always to check the sndbuf_desc
before send any cdc msg, to make sure that no null pointer is
seen during cqe processing.
Fixes: 0b29ec6436 ("net/smc: immediate termination for SMCR link groups")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/1678263432-17329-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using a PHC in shared between multiple hosts, the previous
frequency value may not be reset and could lead to host being unable to
compensate the offset with timecounter adjustments. To avoid such state
reset the hardware frequency of PHC to zero on init. Some refactoring is
needed to make code readable.
Fixes: 85036aee19 ("bnxt_en: Add a non-real time mode to access NIC clock")
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230310151356.678059-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
slot_store() uses kstrtouint() to get a slot number, but stores the
result in an "int" variable (by casting a pointer).
This can result in a negative slot number if the unsigned int value is
very large.
A negative number means that the slot is empty, but setting a negative
slot number this way will not remove the device from the array. I don't
think this is a serious problem, but it could cause confusion and it is
best to fix it.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: d5ef16ba5f ("memory: tegra20: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-21-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: d5ef16ba5f ("memory: tegra20: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-20-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 380def2d4c ("memory: tegra124: Support interconnect framework")
Cc: stable@vger.kernel.org # 5.12
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-19-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 06f079816d ("memory: tegra-mc: Add interconnect framework")
Cc: stable@vger.kernel.org # 5.11
Cc: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-18-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
There is no longer any need to explicitly destroy node links as this is
now done when the node is destroyed as part of icc_nodes_remove().
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-17-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to trigger a NULL-pointer
deference when either a NULL pointer or not fully initialised node is
returned from exynos_generic_icc_xlate().
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 2f95b9d5cf ("interconnect: Add generic interconnect driver for Exynos SoCs")
Cc: stable@vger.kernel.org # 5.11
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-16-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Make sure to add the newly allocated interconnect node to the provider
before adding the PM QoS request so that the node is freed on errors.
Fixes: 2f95b9d5cf ("interconnect: Add generic interconnect driver for Exynos SoCs")
Cc: stable@vger.kernel.org # 5.11
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-15-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 4e60a9568d ("interconnect: qcom: add msm8974 driver")
Cc: stable@vger.kernel.org # 5.5
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-12-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 976daac4a1 ("interconnect: qcom: Consolidate interconnect RPMh support")
Cc: stable@vger.kernel.org # 5.7
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-11-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Make sure to clean up and release resources properly also in case probe
fails when populating child devices.
Fixes: 57eb14779d ("interconnect: qcom: icc-rpmh: Support child NoC device probe")
Cc: stable@vger.kernel.org # 6.0
Cc: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-10-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 62feb14ee8 ("interconnect: qcom: Consolidate interconnect RPM support")
Fixes: 30c8fa3ec6 ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Cc: stable@vger.kernel.org # 5.7
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-9-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Prior to commit 5ee5465940 ("kconfig: change sym_change_count to a
boolean flag"), the conf_updated flag was set to the new value *before*
calling the callback. xconfig's save action depends on this behaviour,
because xconfig calls conf_get_changed() directly from the callback and
now sees the old value, thus never enabling the save button or the
shortcut.
Restore the previous behaviour.
Fixes: 5ee5465940 ("kconfig: change sym_change_count to a boolean flag")
Signed-off-by: Jurica Vukadin <jura@vukad.in>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If md_run() fails after ->active_io is initialized, then percpu_ref_exit
is called in error path. However, later md_free_disk will call
percpu_ref_exit again which leads to a panic because of null pointer
dereference. It can also trigger this bug when resources are initialized
but are freed in error path, then will be freed again in md_free_disk.
BUG: kernel NULL pointer dereference, address: 0000000000000038
Oops: 0000 [#1] PREEMPT SMP
Workqueue: md_misc mddev_delayed_delete
RIP: 0010:free_percpu+0x110/0x630
Call Trace:
<TASK>
__percpu_ref_exit+0x44/0x70
percpu_ref_exit+0x16/0x90
md_free_disk+0x2f/0x80
disk_release+0x101/0x180
device_release+0x84/0x110
kobject_put+0x12a/0x380
kobject_put+0x160/0x380
mddev_delayed_delete+0x19/0x30
process_one_work+0x269/0x680
worker_thread+0x266/0x640
kthread+0x151/0x1b0
ret_from_fork+0x1f/0x30
For creating raid device, md raid calls do_md_run->md_run, dm raid calls
md_run. We alloc those memory in md_run. For stopping raid device, md raid
calls do_md_stop->__md_stop, dm raid calls md_stop->__md_stop. So we can
free those memory resources in __md_stop.
Fixes: 72adae23a7 ("md: Change active_io to percpu")
Reported-and-tested-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Some fixes accumulated so far.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQOwvcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2msH/0EwXAZCieuUnRU2c3wGEYnP+wnQbIBH3aUJ
mpC3vFR9Bdo2bhxYcRjSJ+tUqWmUPn+0XZ8dYR9zu4lDli69cbWflij0+AJ/iGEe
Rm6vhzq9KB4CKRulaW7gEdY+nXaIdoCAhdiI8Ka5QHd17wtnQ7X8g7HJRk+6m8hy
tMfm8osrDXcHSGClipHKkw63n2vflAwA0cLfQjZYec4gwIMqOIDrztvvPJorxTLo
NNHUF1wzyYCiVoWotDjfNcEiYULbSSE3Gau8KDyF6Y1VrkfyakXDAiH77GlttPuv
j7DGIuWUGn84/z51C2HY164ux/bfWwKUHntGk6NvliZDWqeo718=
=6O4V
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Some virtio / vhost / vdpa fixes accumulated so far"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: Ignore virtio-trace/trace-agent
vdpa_sim: set last_used_idx as last_avail_idx in vdpasim_queue_ready
vhost-vdpa: free iommu domain after last use during cleanup
vdpa/mlx5: should not activate virtq object when suspended
vp_vdpa: fix the crash in hot unplug with vp_vdpa
A potentially malicious SEV guest can constantly hammer the hypervisor
using this driver to send down requests and thus prevent or at least
considerably hinder other guests from issuing requests to the secure
processor which is a shared platform resource.
Therefore, the host is permitted and encouraged to throttle such guest
requests.
Add the capability to handle the case when the hypervisor throttles
excessive numbers of requests issued by the guest. Otherwise, the VM
platform communication key will be disabled, preventing the guest from
attesting itself.
Realistically speaking, a well-behaved guest should not even care about
throttling. During its lifetime, it would end up issuing a handful of
requests which the hardware can easily handle.
This is more to address the case of a malicious guest. Such guest should
get throttled and if its VMPCK gets disabled, then that's its own
wrongdoing and perhaps that guest even deserves it.
To the implementation: the hypervisor signals with SNP_GUEST_REQ_ERR_BUSY
that the guest requests should be throttled. That error code is returned
in the upper 32-bit half of exitinfo2 and this is part of the GHCB spec
v2.
So the guest is given a throttling period of 1 minute in which it
retries the request every 2 seconds. This is a good default but if it
turns out to not pan out in practice, it can be tweaked later.
For safety, since the encryption algorithm in GHCBv2 is AES_GCM, control
must remain in the kernel to complete the request with the current
sequence number. Returning without finishing the request allows the
guest to make another request but with different message contents. This
is IV reuse, and breaks cryptographic protections.
[ bp:
- Rewrite commit message and do a simplified version.
- The stable tags are supposed to denote that a cleanup should go
upfront before backporting this so that any future fixes to this
can preserve the sanity of the backporter(s). ]
Fixes: d5af44dde5 ("x86/sev: Provide support for SNP guest request NAEs")
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org> # d6fd48eff7 ("virt/coco/sev-guest: Check SEV_SNP attribute at probe time")
Cc: <stable@kernel.org> # 970ab82374 (" virt/coco/sev-guest: Simplify extended guest request handling")
Cc: <stable@kernel.org> # c5a338274b ("virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()")
Cc: <stable@kernel.org> # 0fdb6cc7c8 ("virt/coco/sev-guest: Carve out the request issuing logic into a helper")
Cc: <stable@kernel.org> # d25bae7dc7 ("virt/coco/sev-guest: Do some code style cleanups")
Cc: <stable@kernel.org> # fa4ae42cc6 ("virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case")
Link: https://lore.kernel.org/r/20230214164638.1189804-2-dionnaglaze@google.com
snp_issue_guest_request() checks the value returned by the hypervisor in
sw_exit_info_2 and returns a different error depending on it.
Convert those checks into a switch-case to make it more readable when
more error values are going to be checked in the future.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-8-bp@alien8.de
Remove unnecessary linebreaks, make the code more compact.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-7-bp@alien8.de
When accel drivers are disabled do not process into
sub-directories and create built-in archives:
AR drivers/accel/habanalabs/built-in.a
AR drivers/accel/ivpu/built-in.a
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301162508.3963484-1-stanislaw.gruszka@linux.intel.com
(cherry picked from commit dd61bbd0d1)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
This makes the code flow a lot easier to follow.
No functional changes.
[ Tom: touchups. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-6-bp@alien8.de
Return a specific error code - -ENOSPC - to signal the too small cert
data buffer instead of checking exit code and exitinfo2.
While at it, hoist the *fw_err assignment in snp_issue_guest_request()
so that a proper error value is returned to the callers.
[ Tom: check override_err instead of err. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-4-bp@alien8.de
No need to check it on every ioctl. And yes, this is a common SEV driver
but it does only SNP-specific operations currently. This can be
revisited later, when more use cases appear.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-3-bp@alien8.de
Users reported oopses on list corruptions when using i915 perf with a
number of concurrently running graphics applications. Root cause analysis
pointed at an issue in barrier processing code -- a race among perf open /
close replacing active barriers with perf requests on kernel context and
concurrent barrier preallocate / acquire operations performed during user
context first pin / last unpin.
When adding a request to a composite tracker, we try to reuse an existing
fence tracker, already allocated and registered with that composite. The
tracker we obtain may already track another fence, may be an idle barrier,
or an active barrier.
If the tracker we get occurs a non-idle barrier then we try to delete that
barrier from a list of barrier tasks it belongs to. However, while doing
that we don't respect return value from a function that performs the
barrier deletion. Should the deletion ever fail, we would end up reusing
the tracker still registered as a barrier task. Since the same structure
field is reused with both fence callback lists and barrier tasks list,
list corruptions would likely occur.
Barriers are now deleted from a barrier tasks list by temporarily removing
the list content, traversing that content with skip over the node to be
deleted, then populating the list back with the modified content. Should
that intentionally racy concurrent deletion attempts be not serialized,
one or more of those may fail because of the list being temporary empty.
Related code that ignores the results of barrier deletion was initially
introduced in v5.4 by commit d8af05ff38 ("drm/i915: Allow sharing the
idle-barrier from other kernel requests"). However, all users of the
barrier deletion routine were apparently serialized at that time, then the
issue didn't exhibit itself. Results of git bisect with help of a newly
developed igt@gem_barrier_race@remote-request IGT test indicate that list
corruptions might start to appear after commit 311770173f ("drm/i915/gt:
Schedule request retirement when timeline idles"), introduced in v5.5.
Respect results of barrier deletion attempts -- mark the barrier as idle
only if successfully deleted from the list. Then, before proceeding with
setting our fence as the one currently tracked, make sure that the tracker
we've got is not a non-idle barrier. If that check fails then don't use
that tracker but go back and try to acquire a new, usable one.
v3: use unlikely() to document what outcome we expect (Andi),
- fix bad grammar in commit description.
v2: no code changes,
- blame commit 311770173f ("drm/i915/gt: Schedule request retirement
when timeline idles"), v5.5, not commit d8af05ff38 ("drm/i915: Allow
sharing the idle-barrier from other kernel requests"), v5.4,
- reword commit description.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6333
Fixes: 311770173f ("drm/i915/gt: Schedule request retirement when timeline idles")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v5.5
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302120820.48740-1-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 5060060557)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It seems that commit bc3c5e0809 ("drm/i915/sseu: Don't try to store EU
mask internally in UAPI format") exposed a potential out-of-bounds
access, reported by UBSAN as following on a laptop with a gen 11 i915
card:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/i915/gt/intel_sseu.c:65:27
index 6 is out of range for type 'u16 [6]'
CPU: 2 PID: 165 Comm: systemd-udevd Not tainted 6.2.0-9-generic #9-Ubuntu
Hardware name: Dell Inc. XPS 13 9300/077Y9N, BIOS 1.11.0 03/22/2022
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x3a
__ubsan_handle_out_of_bounds.cold+0x42/0x47
gen11_compute_sseu_info+0x121/0x130 [i915]
intel_sseu_info_init+0x15d/0x2b0 [i915]
intel_gt_init_mmio+0x23/0x40 [i915]
i915_driver_mmio_probe+0x129/0x400 [i915]
? intel_gt_probe_all+0x91/0x2e0 [i915]
i915_driver_probe+0xe1/0x3f0 [i915]
? drm_privacy_screen_get+0x16d/0x190 [drm]
? acpi_dev_found+0x64/0x80
i915_pci_probe+0xac/0x1b0 [i915]
...
According to the definition of sseu_dev_info, eu_mask->hsw is limited to
a maximum of GEN_MAX_SS_PER_HSW_SLICE (6) sub-slices, but
gen11_sseu_info_init() can potentially set 8 sub-slices, in the
!IS_JSL_EHL(gt->i915) case.
Fix this by reserving up to 8 slots for max_subslices in the eu_mask
struct.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Fixes: bc3c5e0809 ("drm/i915/sseu: Don't try to store EU mask internally in UAPI format")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230220171858.131416-1-andrea.righi@canonical.com
(cherry picked from commit 3cba09a6ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we are using hardcoded 7 for io and fast wake lines.
According to Bspec io and fast wake times are both 42us for
DISPLAY_VER >= 12 and 50us and 32us for older platforms.
Calculate line counts for these and configure them into PSR2_CTL
accordingly
Use 45 us for the fast wake calculation as 42 seems to be too
tight based on testing.
Bspec: 49274, 4289
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 64cf40a125 ("drm/i915/psr: Program default IO buffer Wake and Fast Wake")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7725
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221085304.3382297-1-jouni.hogander@intel.com
(cherry picked from commit cb42e8ede5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Previous documentation suggested that PL1 power limit is always
enabled. However we now find this not to be the case on some
platforms (such as ATSM). Therefore enable PL1 power limit during hwmon
initialization.
Bspec: 51864
v2: Add Bspec reference (Gwan-gyeong)
v3: Add Fixes tag
Fixes: 99f55efb79 ("drm/i915/hwmon: Power PL1 limit and TDP setting")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203155309.1042297-1-ashutosh.dixit@intel.com
(cherry picked from commit 0349c41b05)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On s390 PCI functions may be hotplugged individually even when they
belong to a multi-function device. In particular on an SR-IOV device VFs
may be removed and later re-added.
In commit a50297cf82 ("s390/pci: separate zbus creation from
scanning") it was missed however that struct pci_bus and struct
zpci_bus's resource list retained a reference to the PCI functions MMIO
resources even though those resources are released and freed on
hot-unplug. These stale resources may subsequently be claimed when the
PCI function re-appears resulting in use-after-free.
One idea of fixing this use-after-free in s390 specific code that was
investigated was to simply keep resources around from the moment a PCI
function first appeared until the whole virtual PCI bus created for
a multi-function device disappears. The problem with this however is
that due to the requirement of artificial MMIO addreesses (address
cookies) extra logic is then needed to keep the address cookies
compatible on re-plug. At the same time the MMIO resources semantically
belong to the PCI function so tying their lifecycle to the function
seems more logical.
Instead a simpler approach is to remove the resources of an individually
hot-unplugged PCI function from the PCI bus's resource list while
keeping the resources of other PCI functions on the PCI bus untouched.
This is done by introducing pci_bus_remove_resource() to remove an
individual resource. Similarly the resource also needs to be removed
from the struct zpci_bus's resource list. It turns out however, that
there is really no need to add the MMIO resources to the struct
zpci_bus's resource list at all and instead we can simply use the
zpci_bar_struct's resource pointer directly.
Fixes: a50297cf82 ("s390/pci: separate zbus creation from scanning")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230306151014.60913-2-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The code which handles the ipl report is searching for a free location
in memory where it could copy the component and certificate entries to.
It checks for intersection between the sections required for the kernel
and the component/certificate data area, but fails to check whether
the data structures linking these data areas together intersect.
This might cause the iplreport copy code to overwrite the iplreport
itself. Fix this by adding two addtional intersection checks.
Cc: <stable@vger.kernel.org>
Fixes: 9641b8cc73 ("s390/ipl: read IPL report at early boot")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
since commit 108fc82596e3("tools: Add guest trace agent as a user tool")
introduce virtio-trace/trace-agent, it should be ignored in the git tree.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_52B2BC2F47540A5FEB46E710BD0C8485B409@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Starting from an used_idx different than 0 is needed in use cases like
virtual machine migration. Not doing so and letting the caller set an
avail idx different than 0 causes destination device to try to use old
buffers that source driver already recover and are not available
anymore.
Since vdpa_sim does not support receive inflight descriptors as a
destination of a migration, let's set both avail_idx and used_idx the
same at vq start. This is how vhost-user works in a
VHOST_SET_VRING_BASE call.
Although the simple fix is to set last_used_idx at vdpasim_set_vq_state,
it would be reset at vdpasim_queue_ready. The last_avail_idx case is
fixed with commit 0e84f918fa ("vdpa_sim: not reset state in
vdpasim_queue_ready"). Since the only option is to make it equal to
last_avail_idx, adding the only change needed here.
This was discovered and tested live migrating the vdpa_sim_net device.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230302181857.925374-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently vhost_vdpa_cleanup() unmaps the DMA mappings by calling
`iommu_unmap(v->domain, map->start, map->size);`
from vhost_vdpa_general_unmap() when the parent vDPA driver doesn't
provide DMA config operations.
However, the IOMMU domain referred to by `v->domain` is freed in
vhost_vdpa_free_domain() before vhost_vdpa_cleanup() in
vhost_vdpa_release() which results in NULL pointer de-reference.
Accordingly, moving the call to vhost_vdpa_free_domain() in
vhost_vdpa_cleanup() would makes sense. This will also help
detaching the dma device in error handling of vhost_vdpa_alloc_domain().
This issue was observed on terminating QEMU with SIGQUIT.
Fixes: 037d430556 ("vhost-vdpa: call vhost_vdpa_cleanup during the release")
Signed-off-by: Gautam Dawar <gautam.dawar@amd.com>
Message-Id: <20230301163203.29883-1-gautam.dawar@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This reverts part of commit 015b8cc5e7 ("wifi: cfg80211: Fix use after
free for wext")
This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes: 015b8cc5e7 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZA5EKRIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9JJ8AEAsyyMKJ73ETZlac1S4ZOfEsEl1gZ6+cFb
UuuNcz+XfuYBAOHmrFy3DKqLM58Jgf3OUn4C0i7ldNbkv6WTidifVG8B
=rCK8
-----END PGP SIGNATURE-----
Merge tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"
* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
