Commit Graph

154 Commits

Author SHA1 Message Date
Guenter Roeck
71a9c23246 hwmon: (it87) Add support for IT8628E
IT8628E is functionally identical to IT8620E.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:38 -07:00
Guenter Roeck
0624d86198 hwmon: (it87) Fix pwm_temp_map for system with 6 pwm channels
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:37 -07:00
Guenter Roeck
2cbb9c370f hwmon: (it87) Support automatic pwm control on newer chips
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:37 -07:00
Guenter Roeck
a0df926d33 hwmon: (it87) Enhance validation for fan4 and fan5
Several of the chips supported by this driver have a configuration
register to enable fan4 and fan5. Use those registers to determine
if fan4 and fan5 tachometers are supported.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:37 -07:00
Guenter Roeck
f1bbe61860 hwmon: (it87) Support disabling fan control for all pwm control and chips
On/Off mode is only supported for pwm controls 0-2, and not supported at all for
IT8603E/IT8623E. For pwm controls 3-6 and for IT8603E/IT8623E, SmartGuardian mode
is always enabled. Use it and set the pwm value to the maximum if fan control
is disabled.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:37 -07:00
Guenter Roeck
c962024e30 hwmon: (it87) Formatting cleanup
Fix various checkpatch complaints to clean up the code and
make it easier to read.

CHECK: Do not include the paragraph about writing to the FSF
CHECK: Alignment should match open parenthesis
CHECK: Logical continuations should be on the previous line
CHECK: No space is necessary after a cast
CHECK: Please don't use multiple blank lines
CHECK: Please use a blank line after function/struct/union/enum
       declarations
CHECK: spaces preferred around that '+' (ctx:VxV)
WARNING: Missing a blank line after declarations

No functional change.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:37 -07:00
Guenter Roeck
2310048db7 hwmon: (it87) Use defines for array sizes and sensor counts
Using array size defines makes it much easier to find errors
in index values and loop counts.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:37 -07:00
Guenter Roeck
48b2ae7fe9 hwmon: (it87) Use BIT macro
Using the BIT macro makes the code a little easier to read and has the
added benefit of making checkpatch happy.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:37 -07:00
Guenter Roeck
f838aa2611 hwmon: (it87) Add support for VIN7 to VIN10 on IT8620E
IT8620E supports three additional voltage sensors.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:37 -07:00
Guenter Roeck
559313c4e9 hwmon: (it87) Simplify reading voltage registers
Voltage registers are non-sequential. Use a register array instead
of a macro to map sensor index to register to simplify the code
and to make it easier to add additional voltage sensors.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:37 -07:00
Guenter Roeck
cc18da79d9 hwmon: (it87) Support up to 6 temperature sensors on IT8620E
Add support for the additional temperature sensors on IT8620E.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:37 -07:00
Guenter Roeck
8638d0afb4 hwmon: (it87) Convert to use new hwmon API
Convert to use devm_hwmon_device_register_with_groups to simplify
code and reduce code size. This also attaches sysfs attributes
to the hwmon device and no longer to the platform device.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:36 -07:00
Guenter Roeck
d376684880 hwmon: (it87) Use single group and is_visible for miscellaneous attributes
Use is_visible to determine if attributes should be generated or not.
This simplifies the code and reduces object size by about 120 bytes
on x86_64.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:36 -07:00
Guenter Roeck
5c3912616d hwmon: (it87) Use is_visible for pwm attributes
Simplify code and reduce object size by about 250 bytes on x86_64.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:36 -07:00
Guenter Roeck
9a70ee814d hwmon: (it87) Use is_visible for fan attributes
Simplify code and reduce object size by almost 500 bytes on x86_64.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:36 -07:00
Guenter Roeck
87533770be hwmon: (it87) Use is_visible for temperature sensors
Simplify code and reduce object size by more than 200 bytes on x86_64.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:36 -07:00
Guenter Roeck
5292971563 hwmon: (it87) Use is_visible for voltage sensors
Simplify code and reduce object size by more than 300 bytes on x86_64.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:36 -07:00
Guenter Roeck
c1e7a4ca6d hwmon: (it87) Rearrange code to avoid forward declarations
Cleanup only, no functional change.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:36 -07:00
Guenter Roeck
e84bd9535e hwmon: (it87) Add support for second Super-IO chip
The Super-IO chip can also reside at SIO address 0x4e, and there can be
two Super-IO chips in the system. Add support for it.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:36 -07:00
Guenter Roeck
3c2e35126f hwmon: (it87) Pass SIO base address as parameter to superio functions
This will let us support more than one chip on different SIO addresses
with the same driver.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:36 -07:00
Guenter Roeck
8e50e3c3f6 hwmon: (it87) Don't use pdev as static driver variable
Using the same varible name for function names and as static
variable invites misuse and prevents us from adding support
for a second chip. Rename pdev to it87_pdev and limit its use
to where it is needed.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:36 -07:00
Guenter Roeck
5cae84a58e hwmon: (it87) Simplify error return in it87_device_add
Return directly on errors if there is no cleanup necessary.
Don't create an error message on memory allocation errors.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:35 -07:00
Guenter Roeck
60878bcfd3 hwmon: (it87) Add support for second pwm frequency register
Recent chips have a separate register to select the pwm2 frequency.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:35 -07:00
Guenter Roeck
36c4d98a78 hwmon: (it87) Add support for all pwm channels on IT8620E
IT8620E supports up to 6 pwm channels. Add support for it.
Also check if fan tachometers 4..6 are enabled before instantiating
the respective sysfs attributes.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:35 -07:00
Guenter Roeck
730554059b hwmon: (it87) Add feature flag for AVCC3 support
AVCC3 is supported on IT8620E, similar to IT8603E. Add feature flag
to indicate AVCC3 support. Don't enable it for now on IT8620E since
it is unclear if this chip supports it correctly.

Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-04-19 06:32:35 -07:00
Justin Maggard
ead8080351 hwmon: (it87) Add support for IT8732F
Add support for the IT8732F.  This chip is pretty similar to IT8721F,
with the main difference being that the ADC LSB is 10.9 mV instead of
12 mV.

Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-08-09 13:44:27 -07:00
Guenter Roeck
f83a9cb622 hwmon: (it87) Use feature macros on sio_data
Feature macros work on sio_data as well, so use them there.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-09 06:39:11 -07:00
Guenter Roeck
fa3f70d628 hwmon: (it87) Add support for 6th fan of IT8620E
IT8620E supports up to 6 fan tachometers.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05 06:01:00 -07:00
Guenter Roeck
3ba9d977a9 hwmon: (it87) Add support for IT8620E
IT8620E is mostly compatible to IT7828F. Add generic support for it.

IT8620E supports up to 6 fan tachometers and 6 pwm controls.
Support for the 6th tachometer and for the additional pwm controls
are addded in separate patches.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05 06:01:00 -07:00
Guenter Roeck
4ee07157d6 hwmon: (it87) Add support for IT8790E
IT8790E is a super-IO chip with three fan tachometers. It is mostly
compatible to IT8728F, but only supports three fan tachometers
instead of five.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05 06:00:59 -07:00
Guenter Roeck
7f5726c39a hwmon: (it87) Introduce feature flag to reflect internal in7 sensor
On some chips, in7 is always an internal voltage sensor. Introduce
feature flag to reflect this condition to simplify adding support
for new chips.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05 06:00:52 -07:00
Guenter Roeck
faf392fb84 hwmon: (it87) Introduce configuration field for chip suffix
ITE chips may have 'E', 'F', or both 'E' and 'F' suffixes.
Introduce suffic configuration to the it87_devices structure
to simplify adding new chips.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05 06:00:51 -07:00
Guenter Roeck
f56c9c0aa6 hwmon: (it87) Fix PWM frequency display for chips with newer PWM control
On chips with newer PWM control, the PWM frequency divider is 256
instead of 128. Since the base PWM frequency remained the same, the actual
PWM frequency is half of what it used to be with the older PWM control
mechanism.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-04-05 06:00:42 -07:00
Guenter Roeck
1696d1deb0 hwmon: (it87) Fix pwm sysfs attribute removal
Detection if a pwm channel is supported was wrong on removal,
causing the code to try removing non-existing sysfs attributes.
That didn't matter much because sysfs attribute removal of non-existing
files fails silently, and because the wrong evaluation always returned
false, but should nevertheless be fixed.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-30 08:12:16 -07:00
Guenter Roeck
e8433b42b6 hwmon: (it87) No need to skip fan4 for IT8603
IT8603 only supports three fans, so it is not necessary to skip fan4.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Thomas Lorblanches
a0c1424acb hwmon: (it87) Add support for IT8786E
IT8786E is mostly compatible with IT8771 / IT8772.
Parameters determined by testing various combinations.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Thomas Lorblanches <zlika_ese@hotmail.com>
[Guenter Roeck: merged from github, addressed review comments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Guenter Roeck
32dd7c409d hwmon: (it87) Add feature flag for VID support
Newer chips don't typically support VID inputs or control.
Add a feature flag for VID support to simplify adding support for
new chips.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:36 -07:00
Guenter Roeck
9faf28ca4b hwmon: (it87) Add feature flags for fans count and 16-bit fan configuration
Fans 4-5 are not supported on all chips and revisions. Also, 16-bit fan
counters are always enabled on some chips. Provide feature flags to
simplify adding support for new chips.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Guenter Roeck
fd044868e8 hwmon: (it87) Don't configure 16 bit fan counters it not necessary
On IT8728F, IT8771E, and IT8772E, fans counters are always 16 bit
and don't need to be configured for it.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Guenter Roeck
7bc32d298b hwmon: (it87) Add support for IT8781F
IT8781F is mostly compatible to IT8782F. Major difference is that it only
supports four instead of six UART channels, and therefore does not share
the uart6 pins.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-03-09 09:59:35 -07:00
Wolfram Sang
2a1ed07718 hwmon: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:20:36 +02:00
Rudolf Marek
574e9bd8fa hwmon: (it87) Add support for IT8623E
Add support for the IT8623E found on Asus motherboards. It has same
hardware monitoring block as IT8603E.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-04-04 18:01:35 +02:00
Rudolf Marek
7183ae8c20 hwmon: (it87) Fix IT8603E define name
Fix small typo in the define name for IT8603E.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-04-04 18:01:35 +02:00
Jean Delvare
7c81c60f37 Update Jean Delvare's e-mail address
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29 20:40:08 +01:00
Jean Delvare
b523bb7509 hwmon: (it87) Print proper names for the IT8771E and IT8772E
The driver prints IT8771F and IT8772F instead of IT8771E and IT8772E
respectively when the driver is loaded. This is a cosmetic only bug
but let's fix it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29 20:40:08 +01:00
Rudolf Marek
c145d5c628 hwmon: (it87) Add support for the ITE IT8603E
Add support for IT8603E.

This closes bug #57861:
https://bugzilla.kernel.org/show_bug.cgi?id=57861

[JD: Fixes and clean-ups.]

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2014-01-29 20:40:08 +01:00
Jingoo Han
a8b3a3a53f hwmon: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-11 22:10:39 -07:00
Guenter Roeck
088ce2ac9e hwmon: Fix CamelCase checkpatch warnings
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:40 -07:00
Guenter Roeck
b06367070d hwmon: (it87) Add support for IT8771E and IT8772E
Assume that IT8771E and IT8772E are fully compatible with IT8728F.

IT8771E support contributed by Kelly Anderson.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06 09:57:56 -08:00
Guenter Roeck
2a844c148e hwmon: Replace SENSORS_LIMIT with clamp_val
SENSORS_LIMIT and the generic clamp_val have the same functionality,
and clamp_val is more efficient.

This patch reduces text size by 9052 bytes and bss size by 11624 bytes
for x86_64 builds.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: George Joseph <george.joseph@fairview5.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2013-01-25 21:03:54 -08:00