Commit Graph

806 Commits

Author SHA1 Message Date
Nick Piggin
efedf51c86 Add 'rd' alias to new brd ramdisk driver
Alias brd to rd in the hope of helping legacy users. Suggested by Jan.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-05 14:23:12 -07:00
Christian Borntraeger
3ef5360954 virtio_blk: allow read-only disks
Hello Rusty,

sometimes it is useful to share a disk (e.g. usr). To avoid file system
corruption, the disk should be mounted read-only in that case. This patch
adds a new feature flag, that allows the host to specify, if the disk should
be considered read-only.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-30 15:09:44 +10:00
Chris Lalancette
ac9d463afb Fix crash in virtio_blk during modprobe ; rmmod ; modprobe
Fix a modprobe virtio_blk ; rmmod virtio_blk ; modprobe virtio_blk crash; this
was basically because we weren't doing "del_gendisk()" in the remove path.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (moved del_gendisk up)
2008-05-30 15:09:41 +10:00
Marcin Krol
53978d0a7a brd: don't show ramdisks in /proc/partitions
In 2.6.25, ramdisk devices show up in /proc/partitions, which is a
behaviour change from the old rd.c.  Add GENHD_FL_SUPPRESS_PARTITION_INFO,
which was present in rd.c.

All kernels prior to 2.6.25 weren't displaying ramdisks in
/proc/partitions.  Since there are many userspace tools using information
from /proc/partitions some of them may now behave incorrectly (I didn't
tested any though).  For example before 2.6.25 /proc/partitions was empty
if no block devices like hard disks and such were detected by kernel.  Now
all 16 ramdisks are always visible there.  Some software may rely on such
information (I mean, on empty /proc/partitions).

There was quite similar situation back in 2004, and ramdisks were excluded
back from displaying.  Thats why I called this a regression (maybe a bit
unfortunate).  See this patch for info:
http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.3-rc2/2.6.3-rc2-mm1/broken-out/nbd-proc-partitions-fix.patch

I also think that someone somewhere (long time ago) excluded ramdisks from
/proc/partitions for good reasons.  It is possible that now such new
"feature" is harmless, but I think there are more chances that someone
will say "hey, /proc/partitions has changed, now my software doesn't work"
then "hey where did my new 2.6.25 feature go".  nbd devices are also
excluded, maybe for very same (unknown to me) reasons.

Signed-off-by: Marcin Krol <hawk@pld-linux.org>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-24 09:56:11 -07:00
Stephen Rothwell
8962cadbe7 [POWERPC] iSeries: Remove unused mail address
I don't use my IBM email address normally and people can find me in
CREDITS.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-23 16:45:04 +10:00
Geert Uytterhoeven
fd5b462f0b m68k: Return -ENODEV if no device is found
According to the tests in do_initcalls(), the proper error code in case no
device is found is -ENODEV, not -ENXIO or -EIO.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-18 13:28:50 -07:00
Jens Axboe
28f13702f0 block: avoid duplicate calls to get_part() in disk stat code
get_part() is fairly expensive, as it O(N) loops over partitions
to find the right one. In lots of normal IO paths we end up looking
up the partition twice, to make matters even worse. Change the
stat add code to accept a passed in partition instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-07 10:15:46 +02:00
Linus Torvalds
1be1d6b7f3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (32 commits)
  USB GADGET/PERIPHERAL: g_file_storage Bulk-Only Transport compliance, clear-feature ignore
  USB GADGET/PERIPHERAL: g_file_storage Bulk-Only Transport compliance
  usb_serial: some coding style fixes
  USB: Remove redundant dependencies on USB_ATM.
  USB: UHCI: disable remote wakeup when it's not needed
  USB: OHCI: work around bogus compiler warning
  USB: add Cypress c67x00 OTG controller HCD driver
  USB: add Cypress c67x00 OTG controller core driver
  USB: add Cypress c67x00 low level interface code
  USB: airprime: unlock mutex instead of trying to lock it again
  USB: storage: Update mailling list address
  USB: storage: UNUSUAL_DEVS() for PanDigital Picture frame.
  USB: Add the USB 2.0 extension descriptor.
  USB: add more FTDI device ids
  USB: fix cannot work usb storage when using ohci-sm501
  usb: gadget zero timer init fix
  usb: gadget zero style fixups (mostly whitespace)
  usb serial gadget: CDC ACM fixes
  usb: pxa27x_udc driver
  USB: INTOVA Pixtreme camera mass storage device
  ...
2008-05-02 11:03:08 -07:00
Pete Zaitcev
9029b174ba ub: Cosmetics
Fix a few comments and printk statements.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02 10:25:52 -07:00
Pete Zaitcev
0da13c8c3d ub: Ignore bad residue
I hoped to continue to ignore this problem or use libusual, but these
days it's simpler to work around than to deal with it. Let's attempt to
use bad residue devices and hope that upper level integrity checks catch
any problems (e.g. please use sha1sum on your backups).

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02 10:25:52 -07:00
Pete Zaitcev
82fe26ba7a ub: Tune retries
Make ub to fail faster in hopeless cases.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02 10:25:52 -07:00
Pete Zaitcev
2c51ae70ed ub: Fix timeouts
The wodim says:
"close track/session scsi sendcmd: cmd timeout after 5.000 (480) s"
This happened because we ignored the supplied timeout and used 5s.

It's not completely correct to apply a timeout meant for the complete
command to any single URB, but we don't have many URBs per command, so
this is simple and works.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02 10:25:52 -07:00
Ryan Harper
48e4043d45 virtio: add virtio disk geometry feature
Rather than faking up some geometry, allow the backend to push the disk
geometry via virtio pci config option.  Keep the old geo code around for
compatibility.

Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (modified to single struct)
2008-05-02 21:50:51 +10:00
Rusty Russell
c45a6816c1 virtio: explicit advertisement of driver features
A recent proposed feature addition to the virtio block driver revealed
some flaws in the API: in particular, we assume that feature
negotiation is complete once a driver's probe function returns.

There is nothing in the API to require this, however, and even I
didn't notice when it was violated.

So instead, we require the driver to specify what features it supports
in a table, we can then move the feature negotiation into the virtio
core.  The intersection of device and driver features are presented in
a new 'features' bitmap in the struct virtio_device.

Note that this highlights the difference between Linux unsigned-long
bitmaps where each unsigned long is in native endian, and a
straight-forward little-endian array of bytes.

Drivers can still remove feature bits in their probe routine if they
really have to.

API changes:
- dev->config->feature() no longer gets and acks a feature.
- drivers should advertise their features in the 'feature_table' field
- use virtio_has_feature() for extra sanity when checking feature bits

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02 21:50:50 +10:00
Rusty Russell
72e61eb40b virtio: change config to guest endian.
A recent proposed feature addition to the virtio block driver revealed
some flaws in the API, in particular how easy it is to break big
endian machines.

The virtio config space was originally chosen to be little-endian,
because we thought the config might be part of the PCI config space
for virtio_pci.  It's actually a separate mmio region, so that
argument holds little water; as only x86 is currently using the virtio
mechanism, we can change this (but must do so now, before the
impending s390 merge).

API changes:
- __virtio_config_val() just becomes a striaght vdev->config_get() call.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02 21:50:50 +10:00
Marcelo Tosatti
2e895e4c23 virtio-blk: fix remove oops
Do not unregister the major at device remove, since there might be
another device instances around.

(qemu) pci_del 0 11
(qemu) ACPI: PCI interrupt for device 0000:00:0b.0 disabled
(qemu) pci_del 0 10
(qemu) ------------[ cut here ]------------
WARNING: at block/genhd.c:126 unregister_blkdev+0x74/0x9e()
ACPI: PCI interrupt for device 0000:00:0a.0 disabled

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02 21:50:46 +10:00
Rusty Russell
cb38fa23c1 virtio: de-structify virtio_block status byte
Ron Minnich points out that a struct containing a char is not always
sizeof(char); simplest to remove the structure to avoid confusion.

Cc: "ron minnich" <rminnich@gmail.com>

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02 21:50:45 +10:00
Denis V. Lunev
3dfcf9c4bf cciss: assign PDE->data before gluing PDE into /proc tree
Simply replace proc_create and further data assigned with proc_create_data.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01 08:04:02 -07:00
Laurent Vivier
d7853d1f89 brd: modify ramdisk device to be able to manage partitions
This patch adds partition management for Block RAM Device (BRD).

This patch is done to keep in sync BRD and loop device drivers.

This patch adds a parameter to the module, max_part, to specify
the maximum number of partitions per RAM device.

Example:

# modprobe brd max_part=63
# ls -l /dev/ram*
brw-rw---- 1 root disk 1,   0 2008-04-03 13:39 /dev/ram0
brw-rw---- 1 root disk 1,  64 2008-04-03 13:39 /dev/ram1
brw-rw---- 1 root disk 1, 640 2008-04-03 13:39 /dev/ram10
brw-rw---- 1 root disk 1, 704 2008-04-03 13:39 /dev/ram11
brw-rw---- 1 root disk 1, 768 2008-04-03 13:39 /dev/ram12
brw-rw---- 1 root disk 1, 832 2008-04-03 13:39 /dev/ram13
brw-rw---- 1 root disk 1, 896 2008-04-03 13:39 /dev/ram14
brw-rw---- 1 root disk 1, 960 2008-04-03 13:39 /dev/ram15
brw-rw---- 1 root disk 1, 128 2008-04-03 13:39 /dev/ram2
brw-rw---- 1 root disk 1, 192 2008-04-03 13:39 /dev/ram3
brw-rw---- 1 root disk 1, 256 2008-04-03 13:39 /dev/ram4
brw-rw---- 1 root disk 1, 320 2008-04-03 13:39 /dev/ram5
brw-rw---- 1 root disk 1, 384 2008-04-03 13:39 /dev/ram6
brw-rw---- 1 root disk 1, 448 2008-04-03 13:39 /dev/ram7
brw-rw---- 1 root disk 1, 512 2008-04-03 13:39 /dev/ram8
brw-rw---- 1 root disk 1, 576 2008-04-03 13:39 /dev/ram9
# fdisk /dev/ram0
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): o
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-2, default 1): 1
Last cylinder or +size or +sizeM or +sizeK (1-2, default 2): 2

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
# ls -l /dev/ram0*
brw-rw---- 1 root disk 1, 0 2008-04-03 13:40 /dev/ram0
brw-rw---- 1 root disk 1, 1 2008-04-03 13:40 /dev/ram0p1
# mkfs /dev/ram0p1
mke2fs 1.40-WIP (14-Nov-2006)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
4016 inodes, 16032 blocks
801 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=16515072
2 block groups
8192 blocks per group, 8192 fragments per group
2008 inodes per group
Superblock backups stored on blocks:
	8193

Writing inode tables: done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 26 mounts or
180 days, whichever comes first.  Use tune2fs -c or -i to override.
# mount /dev/ram0p1 /mnt
df /mnt
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/ram0p1              15521       138     14582   1% /mnt
# ls -l /mnt
total 12
drwx------ 2 root root 12288 2008-04-03 13:41 lost+found
# umount /mnt
# rmmod brd

Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:53 -07:00
Linus Torvalds
bd5d435a96 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: Skip I/O merges when disabled
  block: add large command support
  block: replace sizeof(rq->cmd) with BLK_MAX_CDB
  ide: use blk_rq_init() to initialize the request
  block: use blk_rq_init() to initialize the request
  block: rename and export rq_init()
  block: no need to initialize rq->cmd with blk_get_request
  block: no need to initialize rq->cmd in prepare_flush_fn hook
  block/blk-barrier.c:blk_ordered_cur_seq() mustn't be inline
  block/elevator.c:elv_rq_merge_ok() mustn't be inline
  block: make queue flags non-atomic
  block: add dma alignment and padding support to blk_rq_map_kern
  unexport blk_max_pfn
  ps3disk: Remove superfluous cast
  block: make rq_init() do a full memset()
  relay: fix splice problem
2008-04-29 08:18:03 -07:00
Harvey Harrison
f885f8d127 drivers/block: use get_unaligned_* helpers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Ed L. Cashin <ecashin@coraid.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:27 -07:00
Hirofumi Nakagawa
801678c5a3 Remove duplicated unlikely() in IS_ERR()
Some drivers have duplicated unlikely() macros.  IS_ERR() already has
unlikely() in itself.

This patch cleans up such pointless code.

Signed-off-by: Hirofumi Nakagawa <hnakagawa@miraclelinux.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:25 -07:00
Adrian Bunk
0302190411 remove aoedev_isbusy()
Remove the no longer used aoedev_isbusy().

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:24 -07:00
Laurent Vivier
d71a6d7332 NBD: add partition support
Permit the use of partitions with network block devices (NBD).

A new parameter is introduced to define how many partition we want to be able
to manage per network block device.  This parameter is "max_part".

For instance, to manage 63 partitions / loop device, we will do:

   [on the server side]
# nbd-server 1234 /dev/sdb
   [on the client side]
# modprobe nbd max_part=63
# ls -l /dev/nbd*
brw-rw---- 1 root disk 43,   0 2008-03-25 11:14 /dev/nbd0
brw-rw---- 1 root disk 43,  64 2008-03-25 11:11 /dev/nbd1
brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10
brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11
brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12
brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13
brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14
brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15
brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2
brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3
brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4
brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5
brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6
brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7
brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8
brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9
# nbd-client localhost 1234 /dev/nbd0
Negotiation: ..size = 80418240KB
bs=1024, sz=80418240

-------NOTE, RFC: partition table is not automatically read.
The driver sets bdev->bd_invalidated to 1 to force the read of the partition
table of the device, but this is done only on an open of the device.
So we have to do a "touch /dev/nbdX" or something like that.
It can't be done from the nbd-client or nbd driver because at this
level we can't ask to read the partition table and to serve the request
at the same time (-> deadlock)

If someone has a better idea, I'm open to any suggestion.
-------NOTE, RFC

# fdisk -l /dev/nbd0

Disk /dev/nbd0: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

     Device Boot      Start         End      Blocks   Id  System
/dev/nbd0p1   *           1        9965    80043831   83  Linux
/dev/nbd0p2            9966       10011      369495    5  Extended
/dev/nbd0p5            9966       10011      369463+  82  Linux swap / Solaris

# ls -l /dev/nbd0*
brw-rw---- 1 root disk 43,   0 2008-03-25 11:16 /dev/nbd0
brw-rw---- 1 root disk 43,   1 2008-03-25 11:16 /dev/nbd0p1
brw-rw---- 1 root disk 43,   2 2008-03-25 11:16 /dev/nbd0p2
brw-rw---- 1 root disk 43,   5 2008-03-25 11:16 /dev/nbd0p5
# mount /dev/nbd0p1 /mnt
# ls /mnt
bin    dev   initrd      lost+found  opt   sbin     sys  var
boot   etc   initrd.img  media       proc  selinux  tmp  vmlinuz
cdrom  home  lib         mnt         root  srv      usr
# umount /mnt
# nbd-client -d /dev/nbd0
# ls -l /dev/nbd0*
brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0
-------NOTE
On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table:
as the size of the device is 0, we don't have to serve the partition manager
request (-> no deadlock).
-------NOTE

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:23 -07:00
Laurent Vivier
48cf6061b3 NBD: allow nbd to be used locally
This patch allows Network Block Device to be mounted locally (nbd-client to
nbd-server over 127.0.0.1).

It creates a kthread to avoid the deadlock described in NBD tools
documentation.  So, if nbd-client hangs waiting for pages, the kblockd thread
can continue its work and free pages.

I have tested the patch to verify that it avoids the hang that always occurs
when writing to a localhost nbd connection.  I have also tested to verify that
no performance degradation results from the additional thread and queue.

Patch originally from Laurent Vivier.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:23 -07:00
Denis V. Lunev
c7705f3449 drivers: use non-racy method for proc entries creation (2)
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Peter Osterlund <petero2@telia.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Neil Brown <neilb@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:22 -07:00
Alexey Dobriyan
928b4d8c89 proc: remove proc_root_driver
Use creation by full path: "driver/foo".

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:18 -07:00
Harvey Harrison
afe42d7dea xen: make blkif_getgeo static
Introduced between 2.6.25-rc2 and -rc3
drivers/block/xen-blkfront.c:139:5: warning: symbol 'blkif_getgeo' was not declared. Should it be static?

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:06 -07:00
Jon Schindler
7afea3bcb1 drivers/block/floppy.c: replace init_module&cleanup_module with module_init&module_exit
Replace init_module and cleanup_module with static functions and
module_init/module_exit.

Signed-off-by: Jon Schindler <jkschind@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:03 -07:00
FUJITA Tomonori
4f54eec831 block: use blk_rq_init() to initialize the request
Any path needs to call it to initialize the request.

This is a preparation for large command support, which needs to
initialize the request in a proper way (that is, just doing a memset()
will not work).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29 14:48:55 +02:00
FUJITA Tomonori
992b5bceee block: no need to initialize rq->cmd with blk_get_request
blk_get_request initializes rq->cmd (rq_init does) so the users don't
need to do that.

The purpose of this patch is to remove sizeof(rq->cmd) and &rq->cmd,
as a preparation for large command support, which changes rq->cmd from
the static array to a pointer. sizeof(rq->cmd) will not make sense and
&rq->cmd won't work.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29 14:48:55 +02:00
FUJITA Tomonori
4917fa2925 block: no need to initialize rq->cmd in prepare_flush_fn hook
The block layer initializes rq->cmd (queue_flush calls rq_init) so
prepare_flush_fn hooks don't need to do that.

The purpose of this patch is to remove sizeof(rq->cmd), as a
preparation for large command support, which changes rq->cmd from the
static array to a pointer. sizeof(rq->cmd) will not make sense.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29 14:48:54 +02:00
Nick Piggin
75ad23bc0f block: make queue flags non-atomic
We can save some atomic ops in the IO path, if we clearly define
the rules of how to modify the queue flags.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29 14:48:33 +02:00
Geert Uytterhoeven
31e103c595 ps3disk: Remove superfluous cast
As ps3disk is a ppc64-only driver, sector_t equals to unsigned long, and the
cast is not needed.

Reuse in another (possibly 32-bit) driver is protected by the safety net called
`compiler warning' (with the cast, it may silently truncate to 32-bit).
If sector_t ever changes, we will get a compiler warning as well (with the
cast, we won't).

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29 09:50:34 +02:00
Jared Hulbert
30afcb4bd2 return pfn from direct_access, for XIP
Alter the block device ->direct_access() API to work with the new
get_xip_mem() API (that requires both kaddr and pfn are returned).

Some architectures will not do the right thing in their virt_to_page() for use
by XIP (to translate from the kernel virtual address returned by
direct_access(), to a user mappable pfn in XIP's page fault handler.

However, we can't switch it to just return the pfn and not the kaddr, because
we have no good way to get a kva from a pfn, and XIP requires the kva for its
read(2) and write(2) handlers.  So we have to return both.

Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-mm@kvack.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:23 -07:00
Mark McLoughlin
4f93f09b72 xen: Add compatibility aliases for frontend drivers
Before getting merged, xen-blkfront was xenblk and
xen-netfront was xennet.

Temporarily adding compatibility module aliases
eases upgrades from older versions by e.g. allowing
mkinitrd to find the new version of the module.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:33 +02:00
Mark McLoughlin
d2f0c52bec xen: Module autoprobing support for frontend drivers
Add module aliases to support autoprobing modules
for xen frontend devices.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:33 +02:00
Christian Limpach
1d78d70556 xen blkfront: Delay wait for block devices until after the disk is added
When the xen block frontend driver is built as a module the module load
is only synchronous up to the point where the frontend and the backend
become connected rather than when the disk is added.

This means that there can be a race on boot between loading the module and
loading the dm-* modules and doing the scan for LVM physical volumes (all
in the initrd). In the failure case the disk is not present until after the
scan for physical volumes is complete.

Taken from:

  http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/11483a00c017

Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:33 +02:00
Jeremy Fitzhardinge
53f0e8afcb xen/blkfront: use bdget_disk
info->dev is never initialized to anything, so bdget(info->dev) is
meaningless.  Get rid of info->dev, and use bdget_disk on the gendisk.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:33 +02:00
Markus Armbruster
3e334239d8 xen: Make xen-blkfront write its protocol ABI to xenstore
Frontends are expected to write their protocol ABI to xenstore.  Since
the protocol ABI defaults to the backend's native ABI, things work
fine without that as long as the frontend's native ABI is identical to
the backend's native ABI.  This is not the case for xen-blkfront
running 32-on-64, because its ABI differs between 32 and 64 bit, and
thus needs this fix.

Based on http://xenbits.xensource.com/xen-unstable.hg?rev/c545932a18f3
and http://xenbits.xensource.com/xen-unstable.hg?rev/ffe52263b430 by
Gerd Hoffmann <kraxel@suse.de>

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24 23:57:32 +02:00
Petr Tesarik
26defe34e4 fix brd allocation flags
While looking at the implementation of the Ram backed block device
driver, I stumbled across a write-only local variable, which makes
little sense, so I assume it should actually work like this:

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-22 13:38:03 -07:00
Linus Torvalds
548453fd10 Merge branch 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block:
  block: fix blk_register_queue() return value
  block: fix memory hotplug and bouncing in block layer
  block: replace remaining __FUNCTION__ occurrences
  Kconfig: clean up block/Kconfig help descriptions
  cciss: fix warning oops on rmmod of driver
  cciss: Fix race between disk-adding code and interrupt handler
  block: move the padding adjustment to blk_rq_map_sg
  block: add bio_copy_user_iov support to blk_rq_map_user_iov
  block: convert bio_copy_user to bio_copy_user_iov
  loop: manage partitions in disk image
  cdrom: use kmalloced buffers instead of buffers on stack
  cdrom: make unregister_cdrom() return void
  cdrom: use list_head for cdrom_device_info list
  cdrom: protect cdrom_device_info list by mutex
  cdrom: cleanup hardcoded error-code
  cdrom: remove ifdef CONFIG_SYSCTL
2008-04-21 16:03:40 -07:00
Linus Torvalds
9a64388d83 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits)
  [POWERPC] Fix compile breakage for 64-bit UP configs
  [POWERPC] Define copy_siginfo_from_user32
  [POWERPC] Add compat handler for PTRACE_GETSIGINFO
  [POWERPC] i2c: Fix build breakage introduced by OF helpers
  [POWERPC] Optimize fls64() on 64-bit processors
  [POWERPC] irqtrace support for 64-bit powerpc
  [POWERPC] Stacktrace support for lockdep
  [POWERPC] Move stackframe definitions to common header
  [POWERPC] Fix device-tree locking vs. interrupts
  [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const
  [POWERPC] Remove unused __max_memory variable
  [POWERPC] Simplify xics direct/lpar irq_host setup
  [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ()
  [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade()
  [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c
  [POWERPC] Use asm-generic/bitops/find.h in bitops.h
  [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup
  [POWERPC] 85xx: Fix the size of qe muram for MPC8568E
  [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier.
  [POWERPC] 86xx: mark functions static, other minor cleanups
  ...
2008-04-21 15:50:49 -07:00
Harvey Harrison
cece933994 block: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21 09:51:04 +02:00
scameron@beardog.cca.cpqcorp.net
6195057f58 cciss: fix warning oops on rmmod of driver
* Fix oops on cciss rmmod due to calling pci_free_consistent with
  irqs disabled.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21 09:50:09 +02:00
scameron@beardog.cca.cpqcorp.net
e14ac67026 cciss: Fix race between disk-adding code and interrupt handler
Fix race condition between cciss_init_one(), cciss_update_drive_info(),
and cciss_check_queues().

Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21 09:50:09 +02:00
Laurent Vivier
476a4813cf loop: manage partitions in disk image
This patch allows to use loop device with partitionned disk image.

Original behavior of loop is not modified.

A new parameter is introduced to define how many partition we want to be
able to manage per loop device. This parameter is "max_part".

For instance, to manage 63 partitions / loop device, we will do:
# modprobe loop max_part=63
# ls -l /dev/loop?*
brw-rw---- 1 root disk 7,   0 2008-03-05 14:55 /dev/loop0
brw-rw---- 1 root disk 7,  64 2008-03-05 14:55 /dev/loop1
brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2
brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3
brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4
brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5
brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6
brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7

And to attach a raw partitionned disk image, the original losetup is used:

# losetup -f etch.img
# ls -l /dev/loop?*
brw-rw---- 1 root disk 7,   0 2008-03-05 14:55 /dev/loop0
brw-rw---- 1 root disk 7,   1 2008-03-05 14:57 /dev/loop0p1
brw-rw---- 1 root disk 7,   2 2008-03-05 14:57 /dev/loop0p2
brw-rw---- 1 root disk 7,   5 2008-03-05 14:57 /dev/loop0p5
brw-rw---- 1 root disk 7,  64 2008-03-05 14:55 /dev/loop1
brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2
brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3
brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4
brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5
brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6
brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7
# mount /dev/loop0p1 /mnt
# ls /mnt
bench  cdrom  home        lib         mnt   root     srv  usr
bin    dev    initrd      lost+found  opt   sbin     sys  var
boot   etc    initrd.img  media       proc  selinux  tmp  vmlinuz
# umount /mnt
# losetup -d /dev/loop0

Of course, the same behavior can be done using kpartx on a loop device,
but modifying loop avoids to stack several layers of block device (loop +
device mapper), this is a very light modification (40% of modifications
are to manage the new parameter).

Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21 09:50:08 +02:00
Matthew Wilcox
d3135846f6 drivers: Remove unnecessary inclusions of asm/semaphore.h
None of these files use any of the functionality promised by
asm/semaphore.h.  It's possible that they rely on it dragging in some
unrelated header file, but I can't build all these files, so we'll have
fix any build failures as they come up.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:16:32 -04:00
David S. Miller
1e42198609 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-04-17 23:56:30 -07:00
Paul Mackerras
ac7c5353b1 Merge branch 'linux-2.6' 2008-04-14 21:11:02 +10:00