Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct hda_conn_list.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230922175042.work.547-kees@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the CS35L41 amp is requested to mute using the ACPI
notification mechanism, userspace is not notified that the amp
is muted. To allow userspace to know about the mute, add an
ALSA control which tracks the forced mute override.
This control does not track the overall mute state of the amp,
since the amp is only unmuted during playback anyway, instead
it tracks the mute override request from the ACPI notification.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230921162849.1988124-5-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some laptops require a hardware based mute system, where when a hotkey
is pressed, it forces the amp to be muted.
For CS35L41, when the hotkey is pressed, an acpi notification is sent
to the CS35L41 Device Node. The driver needs to handle this notification
and call a _DSM function to retrieve the mute state.
Since the amp is only muted during playback, the driver will only mute
or unmute if playback is occurring, otherwise it will save the mute
state for when playback starts.
This uses the ACPI Notification mechanism, where a handler has been
registered in the component master, which notifies each amp through
the component binding.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230921162849.1988124-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For systems which have support for ACPI notifications, add a mechanism to
register a handler for ACPI notifications and then call the acpi_notify
api on the bound components.
Registering a handler in the Realtek HDA driver, allows a single handler to
be registered, which then calls into all the components, rather than
attempting to register the same handler multiple times, once for each
component.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230921162849.1988124-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some systems support a notification from ACPI, which can be used
for different things.
Only one handler can be registered for the acpi notification, but all
amps need to receive that notification, we can register a single handler
inside the component master, so that it can then notify through the
component framework.
This is required to support mute notifications from ACPI.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230921162849.1988124-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The KUnit test for cirrus_scodec uses GPIO library functions so select
GPIOLIB in Kconfig.
This fixes the ld failures on builds that didn't already select GPIOLIB.
ld: vmlinux.o: in function `cirrus_scodec_test_gpio_get':
sound/pci/hda/cirrus_scodec_test.c:40: undefined reference to
`gpiochip_get_data'
ld: vmlinux.o: in function `cirrus_scodec_test_gpio_probe':
sound/pci/hda/cirrus_scodec_test.c:94: undefined reference to
`gpiochip_generic_request'
ld: sound/pci/hda/cirrus_scodec_test.c:94: undefined reference to
`gpiochip_generic_free'
ld: sound/pci/hda/cirrus_scodec_test.c:95: undefined reference to
`devm_gpiochip_add_data_with_key'
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309201646.NnjfKPWk-lkp@intel.com/
Fixes: 2144833e7b ("ALSA: hda: cirrus_scodec: Add KUnit test")
Link: https://lore.kernel.org/r/20230920090338.29345-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a KUnit test for cirrus_scodec_get_speaker_id(). It is impractical
to have enough hardware with every possible permutation of speaker id.
So use a test harness to test all theoretically supported options.
The test harness consists of:
- a mock GPIO controller.
- a mock struct device to represent the scodec driver
- software nodes to provide the fwnode info that would normally come
from ACPI.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230918095129.440-3-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add handling of the "spk-id-gpios" _DSD property. If present, the
value indicated by the GPIOs is appended to the subsystem-id
part of the firmware name to load the appropriate tunings for that
speaker.
Some manufacturers use multiple sources of speakers, which need
different tunings for best performance. On these models the type
of speaker fitted is indicated by the values of one or more GPIOs.
The number formed by the GPIOs identifies the tuning required.
The speaker ID is only used in combination with a _SUB identifier
because the value is only meaningful if the exact model is known.
The code to get the speaker ID value has been implemented as a
new library so that the cs35l41_hda driver can be switched in
future to share common code. This library can be extended for
other common functionality shared by Cirrus Logic amp drivers.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230918095129.440-2-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The filling of card->longname can be gracefully truncated, as it's
only informative. Use scnprintf() and suppress the superfluous
compile warning with -Wformat-truncation.
Link: https://lore.kernel.org/r/20230915091313.5988-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
add_control_with_pfx() constructs a mixer name element with the fixed
size, and it got compile warnings with -Wformat-truncation.
Although the size overflow is very unlikely, let's have a sanity check
of the string size and returns the error if it really doesn't fit
instead of silent truncation.
Link: https://lore.kernel.org/r/20230915082802.28684-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CMIPCI driver got compile warnings with -Wformat-truncation at a
couple of plain sprintf() usages. Use scnprintf() for filling the
longname string for avoiding the warnings.
Link: https://lore.kernel.org/r/20230915082802.28684-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In cs35l56_hda_read_acpi() do not return if ACPI _SUB is missing.
A missing _SUB means that the driver cannot load a system-specific
firmware, because the firmware is identified by the _SUB. But it can
fallback to a generic firmware. Unfortunately this was being handled
by immediately returning 0, which would skip the remaining ACPI
configuration in cs35l56_hda_read_acpi() and so it would not get the
RESET GPIO.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://lore.kernel.org/r/20230914152525.20829-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo ThinkCentre M70q had boot up pop noise.
Disable power save will solve pop issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/315900e2efef42fd9855eacfeb443abd@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The final return in cs35l56_hda_posture_get() was returning the
value of 'ret', but ret is always zero at this point. So this
can be a simple 'return 0'.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230914140852.7112-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UX3402VA and UX3402ZA models require different hex values, so comibining
them into one model is incorrect.
Fixes: 491a4ccd8a ("ALSA: hda/realtek: Add quirk for ASUS Zenbook using CS35L41")
Signed-off-by: Knyazev Arseniy <poseaydone@ya.ru>
Link: https://lore.kernel.org/r/20230913053343.119798-1-poseaydone@ya.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Do not allow the CS35L56 to be put into its lowest power
"hibernation" mode. This only affects I2C because "hibernation"
is already disabled on SPI.
Recent firmwares need a different wake-up sequence. Until
that sequence has been specified, the chip "hibernation" mode
must be disabled otherwise it can intermittently fail to wake.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230912132739.3478441-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If system has two speakers and one connect to 0x14 pin, use this
function will disable it.
Fixes: e43252db7e ("ALSA: hda/realtek - ALC287 I2S speaker platform support")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/e3f2aac3fe6a47079d728a6443358cc2@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Driver remove() must call pm_runtime_dont_use_autosuspend().
Drivers that call pm_runtime_use_autosuspend() must disable
it in driver remove(). Unfortunately until recently this was
only mentioned in 1 line in a 900+ line document so most
people hadn't noticed this. It has only recently been added
to the kerneldoc of pm_runtime_use_autosuspend().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://lore.kernel.org/r/20230908101223.2656901-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
0x17 was only speaker pin, DAC assigned will be 0x03. Headphone
assigned to 0x02.
Playback via headphone will get EQ filter processing. So,it needs to
swap DAC.
Tested-by: Mark Pearson <mpearson@lenovo.com>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/4e4cfa1b3b4c46838aecafc6e8b6f876@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The LED for the mic mute button is controlled by GPIO2.
The mute button LED is slightly more complex, it's controlled by two bits
in coeff 0x0b.
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/2693091.mvXUDI8C0e@fabians-envy
Signed-off-by: Takashi Iwai <tiwai@suse.de>
struct i2c_driver::probe_new is about to go away. Switch the driver to
use the probe callback with the same prototype.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Link: https://lore.kernel.org/r/20230824200219.9569-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Before committing 79597c8bf6, *rac97 always be NULL if there is
an error. When error happens, make sure *rac97 is NULL is safer.
For examble, in snd_vortex_mixer():
err = snd_ac97_mixer(pbus, &ac97, &vortex->codec);
vortex->isquad = ((vortex->codec == NULL) ?
0 : (vortex->codec->ext_id&0x80));
If error happened but vortex->codec isn't NULL, this may cause some
problems.
Move the judgement order to be clearer and better.
Fixes: 79597c8bf6 ("ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20230823025212.1000961-1-suhui@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CS35L41 HDA driver requires ACPI to contain correct _DSD properties to
correctly configure the device. Whilst the HP Zbook Fury 17 G9 contains
valid _DSD properties, the boost type has been configured incorrectly
in the _DSD for this laptop. We can override these properties to fix
the boost type.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230823143956.755758-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like a few other drivers, YMFPCI driver needs to clean up with
snd_card_free() call at an error path of the probe; otherwise the
other devres resources are released before the card and it results in
the UAF.
This patch uses the helper for handling the probe error gracefully.
Fixes: f33fc15767 ("ALSA: ymfpci: Create card with device-managed snd_devm_card_new()")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Takashi Yano <takashi.yano@nifty.ne.jp>
Closes: https://lore.kernel.org/r/20230823135846.1812-1-takashi.yano@nifty.ne.jp
Link: https://lore.kernel.org/r/20230823161625.5807-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the rme9652 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the hdsp driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the rme96 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Link: https://lore.kernel.org/r/20230815190136.8987-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the rme32 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Link: https://lore.kernel.org/r/20230815190136.8987-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the nm256 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants.
Link: https://lore.kernel.org/r/20230815190136.8987-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the korg1212 driver code to use the new unified
PCM copy callback. The open-coded conditional memory copies are
replaced with simpler copy_from/to_iter() calls.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the es1938 driver code to use the new unified PCM
copy callback. It's a straightforward conversion from *_user() to
*_iter() variants in most parts.
Note that copy_from/to_iter() returns the copied bytes, hence the
error condition is adjusted accordingly.
Link: https://lore.kernel.org/r/20230815190136.8987-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Create tas2781 side codec HDA driver for Lenovo Laptops. The quantity
of the speakers has been define in ACPI. All of the tas2781s in the
laptop will be aggregated as one audio speaker. The code supports
realtek codec as the primary codec. Code offers several controls for
digtial/analog gain setting during playback, and other for eq params
setting in case of different audio profiles, such as music, voice,
movie, etc.
[ adjusted patch to be applied to the latest for-next branch -- tiwai ]
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20230818085836.1442-2-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Integrate tas2781 configs for Lenovo Laptops. All of the tas2781s in the
laptop will be aggregated as one audio device. The code support realtek
as the primary codec. Rename "struct cs35l41_dev_name" to
"struct scodec_dev_name" for all other side codecs instead of the certain
one.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://lore.kernel.org/r/20230818085836.1442-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like control and PCM devices, it's better to avoid the embedded struct
device for hwdep (although it's more or less well working), too.
Change it to allocate via snd_device_alloc(), and free the memory at
the common snd_hwdep_free().
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Tested-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20230816160252.23396-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
cs35l41_prop_model is only used in cs35l41_hda_property.c now,
change it to static.
Fixes: ef4ba63f12 ("ALSA: hda: cs35l41: Support systems with missing _DSD properties")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230817014252.1511232-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Set spec->en_3kpull_low default to true.
Then fillback ALC236 and ALC257 to false.
Additional note: this addresses a regression caused by the previous
fix 69ea4c9d02 ("ALSA: hda/realtek - remove 3k pull low procedure").
The previous workaround was applied too widely without necessity,
which resulted in the pop noise at PM again. This patch corrects the
condition and restores the old behavior for the devices that don't
suffer from the original problem.
Fixes: 69ea4c9d02 ("ALSA: hda/realtek - remove 3k pull low procedure")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217732
Link: https://lore.kernel.org/r/01e212a538fc407ca6edd10b81ff7b05@realtek.com
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some systems using CS35L41 with HDA were released without some
required _DSD properties in ACPI. To support these special cases,
add an api to configure the correct properties for systems with
this issue.
This initial commit moves the no _DSD support for Lenovo
Legion Laptops (CLSA0100, CLSA0101) into a new framework which
can be extended to support additional laptops in the future.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230815161033.3519-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All I2C Dell Oasis models using CS35L41 have been changed to use SPI.
In addition, System 10280cc5 is no longer required.
Fixes: de90f5165b ("ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230809142957.675933-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These HP G11 laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using SPI or I2C with External Boost.
Laptop 103c8c26 has been removed as this has been replaced
by this new series of laptops.
Fixes: 3e10f6ca76 ("ALSA: hda/realtek: Add quirk for HP EliteBook G10 laptops")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230809142957.675933-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
