Commit Graph

332 Commits

Author SHA1 Message Date
Linus Torvalds
94709049fb Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:
 "A few little subsystems and a start of a lot of MM patches.

  Subsystems affected by this patch series: squashfs, ocfs2, parisc,
  vfs. With mm subsystems: slab-generic, slub, debug, pagecache, gup,
  swap, memcg, pagemap, memory-failure, vmalloc, kasan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
  kasan: move kasan_report() into report.c
  mm/mm_init.c: report kasan-tag information stored in page->flags
  ubsan: entirely disable alignment checks under UBSAN_TRAP
  kasan: fix clang compilation warning due to stack protector
  x86/mm: remove vmalloc faulting
  mm: remove vmalloc_sync_(un)mappings()
  x86/mm/32: implement arch_sync_kernel_mappings()
  x86/mm/64: implement arch_sync_kernel_mappings()
  mm/ioremap: track which page-table levels were modified
  mm/vmalloc: track which page-table levels were modified
  mm: add functions to track page directory modifications
  s390: use __vmalloc_node in stack_alloc
  powerpc: use __vmalloc_node in alloc_vm_stack
  arm64: use __vmalloc_node in arch_alloc_vmap_stack
  mm: remove vmalloc_user_node_flags
  mm: switch the test_vmalloc module to use __vmalloc_node
  mm: remove __vmalloc_node_flags_caller
  mm: remove both instances of __vmalloc_node_flags
  mm: remove the prot argument to __vmalloc_node
  mm: remove the pgprot argument to __vmalloc
  ...
2020-06-02 12:21:36 -07:00
Jeff Layton
735e4ae5ba vfs: track per-sb writeback errors and report them to syncfs
Patch series "vfs: have syncfs() return error when there are writeback
errors", v6.

Currently, syncfs does not return errors when one of the inodes fails to
be written back.  It will return errors based on the legacy AS_EIO and
AS_ENOSPC flags when syncing out the block device fails, but that's not
particularly helpful for filesystems that aren't backed by a blockdev.
It's also possible for a stray sync to lose those errors.

The basic idea in this set is to track writeback errors at the
superblock level, so that we can quickly and easily check whether
something bad happened without having to fsync each file individually.
syncfs is then changed to reliably report writeback errors after they
occur, much in the same fashion as fsync does now.

This patch (of 2):

Usually we suggest that applications call fsync when they want to ensure
that all data written to the file has made it to the backing store, but
that can be inefficient when there are a lot of open files.

Calling syncfs on the filesystem can be more efficient in some
situations, but the error reporting doesn't currently work the way most
people expect.  If a single inode on a filesystem reports a writeback
error, syncfs won't necessarily return an error.  syncfs only returns an
error if __sync_blockdev fails, and on some filesystems that's a no-op.

It would be better if syncfs reported an error if there were any
writeback failures.  Then applications could call syncfs to see if there
are any errors on any open files, and could then call fsync on all of
the other descriptors to figure out which one failed.

This patch adds a new errseq_t to struct super_block, and has
mapping_set_error also record writeback errors there.

To report those errors, we also need to keep an errseq_t in struct file
to act as a cursor.  This patch adds a dedicated field for that purpose,
which slots nicely into 4 bytes of padding at the end of struct file on
x86_64.

An earlier version of this patch used an O_PATH file descriptor to cue
the kernel that the open file should track the superblock error and not
the inode's writeback error.

I think that API is just too weird though.  This is simpler and should
make syncfs error reporting "just work" even if someone is multiplexing
fsync and syncfs on the same fds.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andres Freund <andres@anarazel.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/20200428135155.19223-1-jlayton@kernel.org
Link: http://lkml.kernel.org/r/20200428135155.19223-2-jlayton@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02 10:59:05 -07:00
Miklos Szeredi
c8ffd8bcdd vfs: add faccessat2 syscall
POSIX defines faccessat() as having a fourth "flags" argument, while the
linux syscall doesn't have it.  Glibc tries to emulate AT_EACCESS and
AT_SYMLINK_NOFOLLOW, but AT_EACCESS emulation is broken.

Add a new faccessat(2) syscall with the added flags argument and implement
both flags.

The value of AT_EACCESS is defined in glibc headers to be the same as
AT_REMOVEDIR.  Use this value for the kernel interface as well, together
with the explanatory comment.

Also add AT_EMPTY_PATH support, which is not documented by POSIX, but can
be useful and is trivial to implement.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-05-14 16:44:25 +02:00
Miklos Szeredi
9470451505 vfs: split out access_override_creds()
Split out a helper that overrides the credentials in preparation for
actually doing the access check.

This prepares for the next patch that optionally disables the creds
override.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-05-14 16:44:24 +02:00
Linus Torvalds
9c577491b9 Merge branch 'work.dotdot1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pathwalk sanitizing from Al Viro:
 "Massive pathwalk rewrite and cleanups.

  Several iterations have been posted; hopefully this thing is getting
  readable and understandable now. Pretty much all parts of pathname
  resolutions are affected...

  The branch is identical to what has sat in -next, except for commit
  message in "lift all calls of step_into() out of follow_dotdot/
  follow_dotdot_rcu", crediting Qian Cai for reporting the bug; only
  commit message changed there."

* 'work.dotdot1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (69 commits)
  lookup_open(): don't bother with fallbacks to lookup+create
  atomic_open(): no need to pass struct open_flags anymore
  open_last_lookups(): move complete_walk() into do_open()
  open_last_lookups(): lift O_EXCL|O_CREAT handling into do_open()
  open_last_lookups(): don't abuse complete_walk() when all we want is unlazy
  open_last_lookups(): consolidate fsnotify_create() calls
  take post-lookup part of do_last() out of loop
  link_path_walk(): sample parent's i_uid and i_mode for the last component
  __nd_alloc_stack(): make it return bool
  reserve_stack(): switch to __nd_alloc_stack()
  pick_link(): take reserving space on stack into a new helper
  pick_link(): more straightforward handling of allocation failures
  fold path_to_nameidata() into its only remaining caller
  pick_link(): pass it struct path already with normal refcounting rules
  fs/namei.c: kill follow_mount()
  non-RCU analogue of the previous commit
  helper for mount rootwards traversal
  follow_dotdot(): be lazy about changing nd->path
  follow_dotdot_rcu(): be lazy about changing nd->path
  follow_dotdot{,_rcu}(): massage loops
  ...
2020-04-02 12:30:08 -07:00
Al Viro
d9a9f4849f cifs_atomic_open(): fix double-put on late allocation failure
several iterations of ->atomic_open() calling conventions ago, we
used to need fput() if ->atomic_open() failed at some point after
successful finish_open().  Now (since 2016) it's not needed -
struct file carries enough state to make fput() work regardless
of the point in struct file lifecycle and discarding it on
failure exits in open() got unified.  Unfortunately, I'd missed
the fact that we had an instance of ->atomic_open() (cifs one)
that used to need that fput(), as well as the stale comment in
finish_open() demanding such late failure handling.  Trivially
fixed...

Fixes: fe9ec8291f "do_last(): take fput() on error after opening to out:"
Cc: stable@kernel.org # v4.7+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-12 18:25:20 -04:00
Al Viro
31d1726d72 make build_open_flags() treat O_CREAT | O_EXCL as implying O_NOFOLLOW
O_CREAT | O_EXCL means "-EEXIST if we run into a trailing symlink".
As it is, we might or might not have LOOKUP_FOLLOW in op->intent
in that case - that depends upon having O_NOFOLLOW in open flags.
It doesn't matter, since we won't be checking it in that case -
do_last() bails out earlier.

However, making sure it's not set (i.e. acting as if we had an explicit
O_NOFOLLOW) makes the behaviour more explicit and allows to reorder the
check for O_CREAT | O_EXCL in do_last() with the call of step_into()
immediately following it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-27 14:43:56 -05:00
Jens Axboe
35cb6d54c1 fs: make build_open_flags() available internally
This is a prep patch for supporting non-blocking open from io_uring.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-20 17:01:53 -07:00
Aleksa Sarai
fddb5d430a open: introduce openat2(2) syscall
/* Background. */
For a very long time, extending openat(2) with new features has been
incredibly frustrating. This stems from the fact that openat(2) is
possibly the most famous counter-example to the mantra "don't silently
accept garbage from userspace" -- it doesn't check whether unknown flags
are present[1].

This means that (generally) the addition of new flags to openat(2) has
been fraught with backwards-compatibility issues (O_TMPFILE has to be
defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old
kernels gave errors, since it's insecure to silently ignore the
flag[2]). All new security-related flags therefore have a tough road to
being added to openat(2).

Userspace also has a hard time figuring out whether a particular flag is
supported on a particular kernel. While it is now possible with
contemporary kernels (thanks to [3]), older kernels will expose unknown
flag bits through fcntl(F_GETFL). Giving a clear -EINVAL during
openat(2) time matches modern syscall designs and is far more
fool-proof.

In addition, the newly-added path resolution restriction LOOKUP flags
(which we would like to expose to user-space) don't feel related to the
pre-existing O_* flag set -- they affect all components of path lookup.
We'd therefore like to add a new flag argument.

Adding a new syscall allows us to finally fix the flag-ignoring problem,
and we can make it extensible enough so that we will hopefully never
need an openat3(2).

/* Syscall Prototype. */
  /*
   * open_how is an extensible structure (similar in interface to
   * clone3(2) or sched_setattr(2)). The size parameter must be set to
   * sizeof(struct open_how), to allow for future extensions. All future
   * extensions will be appended to open_how, with their zero value
   * acting as a no-op default.
   */
  struct open_how { /* ... */ };

  int openat2(int dfd, const char *pathname,
              struct open_how *how, size_t size);

/* Description. */
The initial version of 'struct open_how' contains the following fields:

  flags
    Used to specify openat(2)-style flags. However, any unknown flag
    bits or otherwise incorrect flag combinations (like O_PATH|O_RDWR)
    will result in -EINVAL. In addition, this field is 64-bits wide to
    allow for more O_ flags than currently permitted with openat(2).

  mode
    The file mode for O_CREAT or O_TMPFILE.

    Must be set to zero if flags does not contain O_CREAT or O_TMPFILE.

  resolve
    Restrict path resolution (in contrast to O_* flags they affect all
    path components). The current set of flags are as follows (at the
    moment, all of the RESOLVE_ flags are implemented as just passing
    the corresponding LOOKUP_ flag).

    RESOLVE_NO_XDEV       => LOOKUP_NO_XDEV
    RESOLVE_NO_SYMLINKS   => LOOKUP_NO_SYMLINKS
    RESOLVE_NO_MAGICLINKS => LOOKUP_NO_MAGICLINKS
    RESOLVE_BENEATH       => LOOKUP_BENEATH
    RESOLVE_IN_ROOT       => LOOKUP_IN_ROOT

open_how does not contain an embedded size field, because it is of
little benefit (userspace can figure out the kernel open_how size at
runtime fairly easily without it). It also only contains u64s (even
though ->mode arguably should be a u16) to avoid having padding fields
which are never used in the future.

Note that as a result of the new how->flags handling, O_PATH|O_TMPFILE
is no longer permitted for openat(2). As far as I can tell, this has
always been a bug and appears to not be used by userspace (and I've not
seen any problems on my machines by disallowing it). If it turns out
this breaks something, we can special-case it and only permit it for
openat(2) but not openat2(2).

After input from Florian Weimer, the new open_how and flag definitions
are inside a separate header from uapi/linux/fcntl.h, to avoid problems
that glibc has with importing that header.

/* Testing. */
In a follow-up patch there are over 200 selftests which ensure that this
syscall has the correct semantics and will correctly handle several
attack scenarios.

In addition, I've written a userspace library[4] which provides
convenient wrappers around openat2(RESOLVE_IN_ROOT) (this is necessary
because no other syscalls support RESOLVE_IN_ROOT, and thus lots of care
must be taken when using RESOLVE_IN_ROOT'd file descriptors with other
syscalls). During the development of this patch, I've run numerous
verification tests using libpathrs (showing that the API is reasonably
usable by userspace).

/* Future Work. */
Additional RESOLVE_ flags have been suggested during the review period.
These can be easily implemented separately (such as blocking auto-mount
during resolution).

Furthermore, there are some other proposed changes to the openat(2)
interface (the most obvious example is magic-link hardening[5]) which
would be a good opportunity to add a way for userspace to restrict how
O_PATH file descriptors can be re-opened.

Another possible avenue of future work would be some kind of
CHECK_FIELDS[6] flag which causes the kernel to indicate to userspace
which openat2(2) flags and fields are supported by the current kernel
(to avoid userspace having to go through several guesses to figure it
out).

[1]: https://lwn.net/Articles/588444/
[2]: https://lore.kernel.org/lkml/CA+55aFyyxJL1LyXZeBsf2ypriraj5ut1XkNDsunRBqgVjZU_6Q@mail.gmail.com
[3]: commit 629e014bb8 ("fs: completely ignore unknown open flags")
[4]: https://sourceware.org/bugzilla/show_bug.cgi?id=17523
[5]: https://lore.kernel.org/lkml/20190930183316.10190-2-cyphar@cyphar.com/
[6]: https://youtu.be/ggD-eb3yPVs

Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-18 09:19:18 -05:00
Linus Torvalds
2be7d348fe Revert "vfs: properly and reliably lock f_pos in fdget_pos()"
This reverts commit 0be0ee7181.

I was hoping it would be benign to switch over entirely to FMODE_STREAM,
and we'd have just a couple of small fixups we'd need, but it looks like
we're not quite there yet.

While it worked fine on both my desktop and laptop, they are fairly
similar in other respects, and run mostly the same loads.  Kenneth
Crudup reports that it seems to break both his vmware installation and
the KDE upower service.  In both cases apparently leading to timeouts
due to waitinmg for the f_pos lock.

There are a number of character devices in particular that definitely
want stream-like behavior, but that currently don't get marked as
streams, and as a result get the exclusion between concurrent
read()/write() on the same file descriptor.  Which doesn't work well for
them.

The most obvious example if this is /dev/console and /dev/tty, which use
console_fops and tty_fops respectively (and ptmx_fops for the pty master
side).  It may be that it's just this that causes problems, but we
clearly weren't ready yet.

Because there's a number of other likely common cases that don't have
llseek implementations and would seem to act as stream devices:

  /dev/fuse		(fuse_dev_operations)
  /dev/mcelog		(mce_chrdev_ops)
  /dev/mei0		(mei_fops)
  /dev/net/tun		(tun_fops)
  /dev/nvme0		(nvme_dev_fops)
  /dev/tpm0		(tpm_fops)
  /proc/self/ns/mnt	(ns_file_operations)
  /dev/snd/pcm*		(snd_pcm_f_ops[])

and while some of these could be trivially automatically detected by the
vfs layer when the character device is opened by just noticing that they
have no read or write operations either, it often isn't that obvious.

Some character devices most definitely do use the file position, even if
they don't allow seeking: the firmware update code, for example, uses
simple_read_from_buffer() that does use f_pos, but doesn't allow seeking
back and forth.

We'll revisit this when there's a better way to detect the problem and
fix it (possibly with a coccinelle script to do more of the FMODE_STREAM
annotations).

Reported-by: Kenneth R. Crudup <kenny@panix.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-26 11:34:06 -08:00
Linus Torvalds
0be0ee7181 vfs: properly and reliably lock f_pos in fdget_pos()
fdget_pos() is used by file operations that will read and update f_pos:
things like "read()", "write()" and "lseek()" (but not, for example,
"pread()/pwrite" that get their file positions elsewhere).

However, it had two separate escape clauses for this, because not
everybody wants or needs serialization of the file position.

The first and most obvious case is the "file descriptor doesn't have a
position at all", ie a stream-like file.  Except we didn't actually use
FMODE_STREAM, but instead used FMODE_ATOMIC_POS.  The reason for that
was that FMODE_STREAM didn't exist back in the days, but also that we
didn't want to mark all the special cases, so we only marked the ones
that _required_ position atomicity according to POSIX - regular files
and directories.

The case one was intentionally lazy, but now that we _do_ have
FMODE_STREAM we could and should just use it.  With the change to use
FMODE_STREAM, there are no remaining uses for FMODE_ATOMIC_POS, and all
the code to set it is deleted.

Any cases where we don't want the serialization because the driver (or
subsystem) doesn't use the file position should just be updated to do
"stream_open()".  We've done that for all the obvious and common
situations, we may need a few more.  Quoting Kirill Smelkov in the
original FMODE_STREAM thread (see link below for full email):

 "And I appreciate if people could help at least somehow with "getting
  rid of mixed case entirely" (i.e. always lock f_pos_lock on
  !FMODE_STREAM), because this transition starts to diverge from my
  particular use-case too far. To me it makes sense to do that
  transition as follows:

   - convert nonseekable_open -> stream_open via stream_open.cocci;
   - audit other nonseekable_open calls and convert left users that
     truly don't depend on position to stream_open;
   - extend stream_open.cocci to analyze alloc_file_pseudo as well (this
     will cover pipes and sockets), or maybe convert pipes and sockets
     to FMODE_STREAM manually;
   - extend stream_open.cocci to analyze file_operations that use
     no_llseek or noop_llseek, but do not use nonseekable_open or
     alloc_file_pseudo. This might find files that have stream semantic
     but are opened differently;
   - extend stream_open.cocci to analyze file_operations whose
     .read/.write do not use ppos at all (independently of how file was
     opened);
   - ...
   - after that remove FMODE_ATOMIC_POS and always take f_pos_lock if
     !FMODE_STREAM;
   - gather bug reports for deadlocked read/write and convert missed
     cases to FMODE_STREAM, probably extending stream_open.cocci along
     the road to catch similar cases

  i.e. always take f_pos_lock unless a file is explicitly marked as
  being stream, and try to find and cover all files that are streams"

We have not done the "extend stream_open.cocci to analyze
alloc_file_pseudo" as well, but the previous commit did manually handle
the case of pipes and sockets.

The other case where we can avoid locking f_pos is the "this file
descriptor only has a single user and it is us, and thus there is no
need to lock it".

The second test was correct, although a bit subtle and worth just
re-iterating here.  There are two kinds of other sources of references
to the same file descriptor: file descriptors that have been explicitly
shared across fork() or with dup(), and file tables having elevated
reference counts due to threading (or explicit file sharing with
clone()).

The first case would have incremented the file count explicitly, and in
the second case the previous __fdget() would have incremented it for us
and set the FDPUT_FPUT flag.

But in both cases the file count would be greater than one, so the
"file_count(file) > 1" test catches both situations.  Also note that if
file_count is 1, that also means that no other thread can have access to
the file table, so there also cannot be races with concurrent calls to
dup()/fork()/clone() that would increment the file count any other way.

Link: https://lore.kernel.org/linux-fsdevel/20190413184404.GA13490@deco.navytux.spb.ru
Cc: Kirill Smelkov <kirr@nexedi.com>
Cc: Eic Dumazet <edumazet@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Marco Elver <elver@google.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Paul McKenney <paulmck@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-25 10:01:53 -08:00
Denis Efremov
7159d54418 fs: remove unlikely() from WARN_ON() condition
"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely()
internally.

Link: http://lkml.kernel.org/r/20190829165025.15750-5-efremov@linux.com
Signed-off-by: Denis Efremov <efremov@linux.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26 10:10:30 -07:00
Song Liu
09d91cda0e mm,thp: avoid writes to file with THP in pagecache
In previous patch, an application could put part of its text section in
THP via madvise().  These THPs will be protected from writes when the
application is still running (TXTBSY).  However, after the application
exits, the file is available for writes.

This patch avoids writes to file THP by dropping page cache for the file
when the file is open for write.  A new counter nr_thps is added to struct
address_space.  In do_dentry_open(), if the file is open for write and
nr_thps is non-zero, we drop page cache for the whole file.

Link: http://lkml.kernel.org/r/20190801184244.3169074-8-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 15:54:11 -07:00
Linus Torvalds
d7852fbd0f access: avoid the RCU grace period for the temporary subjective credentials
It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU
work because it installs a temporary credential that gets allocated and
freed for each system call.

The allocation and freeing overhead is mostly benign, but because
credentials can be accessed under the RCU read lock, the freeing
involves a RCU grace period.

Which is not a huge deal normally, but if you have a lot of access()
calls, this causes a fair amount of seconday damage: instead of having a
nice alloc/free patterns that hits in hot per-CPU slab caches, you have
all those delayed free's, and on big machines with hundreds of cores,
the RCU overhead can end up being enormous.

But it turns out that all of this is entirely unnecessary.  Exactly
because access() only installs the credential as the thread-local
subjective credential, the temporary cred pointer doesn't actually need
to be RCU free'd at all.  Once we're done using it, we can just free it
synchronously and avoid all the RCU overhead.

So add a 'non_rcu' flag to 'struct cred', which can be set by users that
know they only use it in non-RCU context (there are other potential
users for this).  We can make it a union with the rcu freeing list head
that we need for the RCU case, so this doesn't need any extra storage.

Note that this also makes 'get_current_cred()' clear the new non_rcu
flag, in case we have filesystems that take a long-term reference to the
cred and then expect the RCU delayed freeing afterwards.  It's not
entirely clear that this is required, but it makes for clear semantics:
the subjective cred remains non-RCU as long as you only access it
synchronously using the thread-local accessors, but you _can_ use it as
a generic cred if you want to.

It is possible that we should just remove the whole RCU markings for
->cred entirely.  Only ->real_cred is really supposed to be accessed
through RCU, and the long-term cred copies that nfs uses might want to
explicitly re-enable RCU freeing if required, rather than have
get_current_cred() do it implicitly.

But this is a "minimal semantic changes" change for the immediate
problem.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jan Glauber <jglauber@marvell.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-24 10:12:09 -07:00
Thomas Gleixner
457c899653 treewide: Add SPDX license identifier for missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Kirill Smelkov
438ab720c6 vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files
This amends commit 10dce8af34 ("fs: stream_open - opener for
stream-like files so that read and write can run simultaneously without
deadlock") in how position is passed into .read()/.write() handler for
stream-like files:

Rasmus noticed that we currently pass 0 as position and ignore any position
change if that is done by a file implementation. This papers over bugs if ppos
is used in files that declare themselves as being stream-like as such bugs will
go unnoticed. Even if a file implementation is correctly converted into using
stream_open, its read/write later could be changed to use ppos and even though
that won't be working correctly, that bug might go unnoticed without someone
doing wrong behaviour analysis. It is thus better to pass ppos=NULL into
read/write for stream-like files as that don't give any chance for ppos usage
bugs because it will oops if ppos is ever used inside .read() or .write().

Note 1: rw_verify_area, new_sync_{read,write} needs to be updated
because they are called by vfs_read/vfs_write & friends before
file_operations .read/.write .

Note 2: if file backend uses new-style .read_iter/.write_iter, position
is still passed into there as non-pointer kiocb.ki_pos . Currently
stream_open.cocci (semantic patch added by 10dce8af34) ignores files
whose file_operations has *_iter methods.

Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-05-06 17:46:52 +03:00
Kirill Smelkov
10dce8af34 fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock
Commit 9c225f2655 ("vfs: atomic f_pos accesses as per POSIX") added
locking for file.f_pos access and in particular made concurrent read and
write not possible - now both those functions take f_pos lock for the
whole run, and so if e.g. a read is blocked waiting for data, write will
deadlock waiting for that read to complete.

This caused regression for stream-like files where previously read and
write could run simultaneously, but after that patch could not do so
anymore. See e.g. commit 581d21a2d0 ("xenbus: fix deadlock on writes
to /proc/xen/xenbus") which fixes such regression for particular case of
/proc/xen/xenbus.

The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
safety for read/write/lseek and added the locking to file descriptors of
all regular files. In 2014 that thread-safety problem was not new as it
was already discussed earlier in 2006.

However even though 2006'th version of Linus's patch was adding f_pos
locking "only for files that are marked seekable with FMODE_LSEEK (thus
avoiding the stream-like objects like pipes and sockets)", the 2014
version - the one that actually made it into the tree as 9c225f2655 -
is doing so irregardless of whether a file is seekable or not.

See

    https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/
    https://lwn.net/Articles/180387
    https://lwn.net/Articles/180396

for historic context.

The reason that it did so is, probably, that there are many files that
are marked non-seekable, but e.g. their read implementation actually
depends on knowing current position to correctly handle the read. Some
examples:

	kernel/power/user.c		snapshot_read
	fs/debugfs/file.c		u32_array_read
	fs/fuse/control.c		fuse_conn_waiting_read + ...
	drivers/hwmon/asus_atk0110.c	atk_debugfs_ggrp_read
	arch/s390/hypfs/inode.c		hypfs_read_iter
	...

Despite that, many nonseekable_open users implement read and write with
pure stream semantics - they don't depend on passed ppos at all. And for
those cases where read could wait for something inside, it creates a
situation similar to xenbus - the write could be never made to go until
read is done, and read is waiting for some, potentially external, event,
for potentially unbounded time -> deadlock.

Besides xenbus, there are 14 such places in the kernel that I've found
with semantic patch (see below):

	drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
	drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
	drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
	drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
	net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
	drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
	drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
	drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
	net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
	drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
	drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
	drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
	drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
	drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()

In addition to the cases above another regression caused by f_pos
locking is that now FUSE filesystems that implement open with
FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
stream-like files - for the same reason as above e.g. read can deadlock
write locking on file.f_pos in the kernel.

FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f7 ("fuse:
implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
write routines not depending on current position at all, and with both
read and write being potentially blocking operations:

See

    https://github.com/libfuse/osspd
    https://lwn.net/Articles/308445

    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477
    https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510

Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
"somewhat pipe-like files ..." with read handler not using offset.
However that test implements only read without write and cannot exercise
the deadlock scenario:

    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163
    https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216

I've actually hit the read vs write deadlock for real while implementing
my FUSE filesystem where there is /head/watch file, for which open
creates separate bidirectional socket-like stream in between filesystem
and its user with both read and write being later performed
simultaneously. And there it is semantically not easy to split the
stream into two separate read-only and write-only channels:

    https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169

Let's fix this regression. The plan is:

1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
   doing so would break many in-kernel nonseekable_open users which
   actually use ppos in read/write handlers.

2. Add stream_open() to kernel to open stream-like non-seekable file
   descriptors. Read and write on such file descriptors would never use
   nor change ppos. And with that property on stream-like files read and
   write will be running without taking f_pos lock - i.e. read and write
   could be running simultaneously.

3. With semantic patch search and convert to stream_open all in-kernel
   nonseekable_open users for which read and write actually do not
   depend on ppos and where there is no other methods in file_operations
   which assume @offset access.

4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
   steam_open if that bit is present in filesystem open reply.

   It was tempting to change fs/fuse/ open handler to use stream_open
   instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
   grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
   and in particular GVFS which actually uses offset in its read and
   write handlers

	https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
	https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481

   so if we would do such a change it will break a real user.

5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
   from v3.14+ (the kernel where 9c225f2655 first appeared).

   This will allow to patch OSSPD and other FUSE filesystems that
   provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
   in their open handler and this way avoid the deadlock on all kernel
   versions. This should work because fs/fuse/ ignores unknown open
   flags returned from a filesystem and so passing FOPEN_STREAM to a
   kernel that is not aware of this flag cannot hurt. In turn the kernel
   that is not aware of FOPEN_STREAM will be < v3.14 where just
   FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
   write deadlock.

This patch adds stream_open, converts /proc/xen/xenbus to it and adds
semantic patch to automatically locate in-kernel places that are either
required to be converted due to read vs write deadlock, or that are just
safe to be converted because read and write do not use ppos and there
are no other funky methods in file_operations.

Regarding semantic patch I've verified each generated change manually -
that it is correct to convert - and each other nonseekable_open instance
left - that it is either not correct to convert there, or that it is not
converted due to current stream_open.cocci limitations.

The script also does not convert files that should be valid to convert,
but that currently have .llseek = noop_llseek or generic_file_llseek for
unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)

Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yongzhi Pan <panyongzhi@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Nikolaus Rath <Nikolaus@rath.org>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-06 07:01:55 -10:00
Tetsuo Handa
73601ea5b7 fs/open.c: allow opening only regular files during execve()
syzbot is hitting lockdep warning [1] due to trying to open a fifo
during an execve() operation.  But we don't need to open non regular
files during an execve() operation, for all files which we will need are
the executable file itself and the interpreter programs like /bin/sh and
ld-linux.so.2 .

Since the manpage for execve(2) says that execve() returns EACCES when
the file or a script interpreter is not a regular file, and the manpage
for uselib(2) says that uselib() can return EACCES, and we use
FMODE_EXEC when opening for execve()/uselib(), we can bail out if a non
regular file is requested with FMODE_EXEC set.

Since this deadlock followed by khungtaskd warnings is trivially
reproducible by a local unprivileged user, and syzbot's frequent crash
due to this deadlock defers finding other bugs, let's workaround this
deadlock until we get a chance to find a better solution.

[1] https://syzkaller.appspot.com/bug?id=b5095bfec44ec84213bac54742a82483aad578ce

Link: http://lkml.kernel.org/r/1552044017-7890-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Reported-by: syzbot <syzbot+e93a80c1bb7c5c56e522461c149f8bf55eab1b2b@syzkaller.appspotmail.com>
Fixes: 8924feff66 ("splice: lift pipe_lock out of splice_to_pipe()")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>	[4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-29 10:01:37 -07:00
Linus Torvalds
d9a185f8b4 overlayfs update for 4.19
This contains two new features:
 
  1) Stack file operations: this allows removal of several hacks from the
     VFS, proper interaction of read-only open files with copy-up,
     possibility to implement fs modifying ioctls properly, and others.
 
  2) Metadata only copy-up: when file is on lower layer and only metadata is
     modified (except size) then only copy up the metadata and continue to
     use the data from the lower file.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCW3srhAAKCRDh3BK/laaZ
 PC6tAQCP+KklcN+TvNp502f+O/kATahSpgnun4NY1/p4I8JV+AEAzdlkTN3+MiAO
 fn9brN6mBK7h59DO3hqedPLJy2vrgwg=
 =QDXH
 -----END PGP SIGNATURE-----

Merge tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs

Pull overlayfs updates from Miklos Szeredi:
 "This contains two new features:

   - Stack file operations: this allows removal of several hacks from
     the VFS, proper interaction of read-only open files with copy-up,
     possibility to implement fs modifying ioctls properly, and others.

   - Metadata only copy-up: when file is on lower layer and only
     metadata is modified (except size) then only copy up the metadata
     and continue to use the data from the lower file"

* tag 'ovl-update-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (66 commits)
  ovl: Enable metadata only feature
  ovl: Do not do metacopy only for ioctl modifying file attr
  ovl: Do not do metadata only copy-up for truncate operation
  ovl: add helper to force data copy-up
  ovl: Check redirect on index as well
  ovl: Set redirect on upper inode when it is linked
  ovl: Set redirect on metacopy files upon rename
  ovl: Do not set dentry type ORIGIN for broken hardlinks
  ovl: Add an inode flag OVL_CONST_INO
  ovl: Treat metacopy dentries as type OVL_PATH_MERGE
  ovl: Check redirects for metacopy files
  ovl: Move some dir related ovl_lookup_single() code in else block
  ovl: Do not expose metacopy only dentry from d_real()
  ovl: Open file with data except for the case of fsync
  ovl: Add helper ovl_inode_realdata()
  ovl: Store lower data inode in ovl_inode
  ovl: Fix ovl_getattr() to get number of blocks from lower
  ovl: Add helper ovl_dentry_lowerdata() to get lower data dentry
  ovl: Copy up meta inode data from lowest data inode
  ovl: Modify ovl_lookup() and friends to lookup metacopy dentry
  ...
2018-08-21 18:19:09 -07:00
Miklos Szeredi
8cf9ee5061 Revert "vfs: do get_write_access() on upper layer of overlayfs"
This reverts commit 4d0c5ba2ff.

We now get write access on both overlay and underlying layers so this patch
is no longer needed for correct operation.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-18 15:44:43 +02:00
Miklos Szeredi
4ab30319fd Revert "vfs: add flags to d_real()"
This reverts commit 495e642939.

No user of "flags" argument of d_real() remain.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-18 15:44:43 +02:00
Miklos Szeredi
6742cee043 Revert "ovl: don't allow writing ioctl on lower layer"
This reverts commit 7c6893e3c9.

Overlayfs no longer relies on the vfs for checking writability of files.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-18 15:44:43 +02:00
Miklos Szeredi
a6518f73e6 vfs: don't open real
Let overlayfs do its thing when opening a file.

This enables stacking and fixes the corner case when a file is opened for
read, modified through a writable open, and data is read from the read-only
file.  After this patch the read-only open will not return stale data even
in this case.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-18 15:44:42 +02:00
Miklos Szeredi
d3b1084dfd vfs: make open_with_fake_path() not contribute to nr_files
Stacking file operations in overlay will store an extra open file for each
overlay file opened.

The overhead is just that of "struct file" which is about 256bytes, because
overlay already pins an extra dentry and inode when the file is open, which
add up to a much larger overhead.

For fear of breaking working setups, don't start accounting the extra file.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-18 15:44:40 +02:00
Al Viro
2abc77af89 new helper: open_with_fake_path()
open a file by given inode, faking ->f_path.  Use with shitloads
of caution - at the very least you'd damn better make sure that
some dentry alias of that inode is pinned down by the path in
question.  Again, this is no general-purpose interface and I hope
it will eventually go away.  Right now overlayfs wants something
like that, but nothing else should.

Any out-of-tree code with bright idea of using this one *will*
eventually get hurt, with zero notice and great delight on my part.
I refuse to use EXPORT_SYMBOL_GPL(), especially in situations when
it's really EXPORT_SYMBOL_DONT_USE_IT(), but don't take that export
as "you are welcome to use it".

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 11:18:42 -04:00
Al Viro
64e1ac4d46 ->atomic_open(): return 0 in all success cases
FMODE_OPENED can be used to distingusish "successful open" from the
"called finish_no_open(), do it yourself" cases.  Since finish_no_open()
has been adjusted, no changes in the instances were actually needed.
The caller has been adjusted.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:21 -04:00
Al Viro
be12af3ef5 getting rid of 'opened' argument of ->atomic_open() - part 1
'opened' argument of finish_open() is unused.  Kill it.

Signed-off-by Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:19 -04:00
Al Viro
aad888f828 switch all remaining checks for FILE_OPENED to FMODE_OPENED
... and don't bother with setting FILE_OPENED at all.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:18 -04:00
Al Viro
69527c554f now we can fold open_check_o_direct() into do_dentry_open()
These checks are better off in do_dentry_open(); the reason we couldn't
put them there used to be that callers couldn't tell what kind of cleanup
would do_dentry_open() failure call for.  Now that we have FMODE_OPENED,
cleanup is the same in all cases - it's simply fput().  So let's fold
that into do_dentry_open(), as Christoph's patch tried to.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:17 -04:00
Al Viro
4d27f3266f fold put_filp() into fput()
Just check FMODE_OPENED in __fput() and be done with that...

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:16 -04:00
Al Viro
f5d11409e6 introduce FMODE_OPENED
basically, "is that instance set up enough for regular fput(), or
do we want put_filp() for that one".

NOTE: the only alloc_file() caller that could be followed by put_filp()
is in arch/ia64/kernel/perfmon.c, which is (Kconfig-level) broken.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:16 -04:00
Al Viro
e3f20ae210 security_file_open(): lose cred argument
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:15 -04:00
Al Viro
ae2bb293a3 get rid of cred argument of vfs_open() and do_dentry_open()
always equal to ->f_cred

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:14 -04:00
Al Viro
ea73ea7279 pass ->f_flags value to alloc_empty_file()
... and have it set the f_flags-derived part of ->f_mode.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:13 -04:00
Al Viro
6de37b6dc0 pass creds to get_empty_filp(), make sure dentry_open() passes the right creds
... and rename get_empty_filp() to alloc_empty_file().

dentry_open() gets creds as argument, but the only thing that sees those is
security_file_open() - file->f_cred still ends up with current_cred().  For
almost all callers it's the same thing, but there are several broken cases.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12 10:04:13 -04:00
Al Viro
6b4e8085c0 make sure do_dentry_open() won't return positive as an error
An ->open() instances really, really should not be doing that.  There's
a lot of places e.g. around atomic_open() that could be confused by that,
so let's catch that early.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-10 23:29:03 -04:00
Al Viro
19f391eb05 turn filp_clone_open() into inline wrapper for dentry_open()
it's exactly the same thing as
	dentry_open(&file->f_path, file->f_flags, file->f_cred)

... and rename it to file_clone_open(), while we are at it.
'filp' naming convention is bogus; sure, it's "file pointer",
but we generally don't do that kind of Hungarian notation.
Some of the instances have too many callers to touch, but this
one has only two, so let's sanitize it while we can...

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-10 23:29:03 -04:00
Al Viro
af04fadcaa Revert "fs: fold open_check_o_direct into do_dentry_open"
This reverts commit cab64df194.

Having vfs_open() in some cases drop the reference to
struct file combined with

	error = vfs_open(path, f, cred);
	if (error) {
		put_filp(f);
		return ERR_PTR(error);
	}
	return f;

is flat-out wrong.  It used to be

		error = vfs_open(path, f, cred);
		if (!error) {
			/* from now on we need fput() to dispose of f */
			error = open_check_o_direct(f);
			if (error) {
				fput(f);
				f = ERR_PTR(error);
			}
		} else {
			put_filp(f);
			f = ERR_PTR(error);
		}

and sure, having that open_check_o_direct() boilerplate gotten rid of is
nice, but not that way...

Worse, another call chain (via finish_open()) is FUBAR now wrt
FILE_OPENED handling - in that case we get error returned, with file
already hit by fput() *AND* FILE_OPENED not set.  Guess what happens in
path_openat(), when it hits

	if (!(opened & FILE_OPENED)) {
		BUG_ON(!error);
		put_filp(file);
	}

The root cause of all that crap is that the callers of do_dentry_open()
have no way to tell which way did it fail; while that could be fixed up
(by passing something like int *opened to do_dentry_open() and have it
marked if we'd called ->open()), it's probably much too late in the
cycle to do so right now.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-03 10:58:23 -07:00
Linus Torvalds
9022ca6b11 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "Assorted stuff, including Christoph's I_DIRTY patches"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: move I_DIRTY_INODE to fs.h
  ubifs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) call
  ntfs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) call
  gfs2: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) calls
  fs: fold open_check_o_direct into do_dentry_open
  vfs: Replace stray non-ASCII homoglyph characters with their ASCII equivalents
  vfs: make sure struct filename->iname is word-aligned
  get rid of pointless includes of fs_struct.h
  [poll] annotate SAA6588_CMD_POLL users
2018-04-06 11:07:08 -07:00
Dominik Brodowski
edf292c76b fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate()
Using the ksys_fallocate() wrapper allows us to get rid of in-kernel
calls to the sys_fallocate() syscall. The ksys_ prefix denotes that this
function is meant as a drop-in replacement for the syscall. In
particular, it uses the same calling convention as sys_fallocate().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:09 +02:00
Dominik Brodowski
df260e21e6 fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate()
Using the ksys_truncate() wrapper allows us to get rid of in-kernel
calls to the sys_truncate() syscall. The ksys_ prefix denotes that this
function is meant as a drop-in replacement for the syscall. In
particular, it uses the same calling convention as sys_truncate().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:08 +02:00
Dominik Brodowski
bae217ea8c fs: add ksys_open() wrapper; remove in-kernel calls to sys_open()
Using this wrapper allows us to avoid the in-kernel calls to the
sys_open() syscall. The ksys_ prefix denotes that this function is meant
as a drop-in replacement for the syscall. In particular, it uses the
same calling convention as sys_open().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:01 +02:00
Dominik Brodowski
2ca2a09d62 fs: add ksys_close() wrapper; remove in-kernel calls to sys_close()
Using the ksys_close() wrapper allows us to get rid of in-kernel calls
to the sys_close() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_close(), with one subtle
difference:

The few places which checked the return value did not care about the return
value re-writing in sys_close(), so simply use a wrapper around
__close_fd().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:00 +02:00
Dominik Brodowski
411d9475cf fs: add ksys_ftruncate() wrapper; remove in-kernel calls to sys_ftruncate()
Using the ksys_ftruncate() wrapper allows us to get rid of in-kernel
calls to the sys_ftruncate() syscall. The ksys_ prefix denotes that this
function is meant as a drop-in replacement for the syscall. In
particular, it uses the same calling convention as sys_ftruncate().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:00 +02:00
Dominik Brodowski
55731b3cda fs: add do_fchownat(), ksys_fchown() helpers and ksys_{,l}chown() wrappers
Using the fs-interal do_fchownat() wrapper allows us to get rid of
fs-internal calls to the sys_fchownat() syscall.

Introducing the ksys_fchown() helper and the ksys_{,}chown() wrappers
allows us to avoid the in-kernel calls to the sys_{,l,f}chown() syscalls.
The ksys_ prefix denotes that these functions are meant as a drop-in
replacement for the syscalls. In particular, they use the same calling
convention as sys_{,l,f}chown().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:59 +02:00
Dominik Brodowski
cbfe20f565 fs: add do_faccessat() helper and ksys_access() wrapper; remove in-kernel calls to syscall
Using the fs-internal do_faccessat() helper allows us to get rid of
fs-internal calls to the sys_faccessat() syscall.

Introducing the ksys_access() wrapper allows us to avoid the in-kernel
calls to the sys_access() syscall. The ksys_ prefix denotes that this
function is meant as a drop-in replacement for the syscall. In
particular, it uses the same calling convention as sys_access().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:58 +02:00
Dominik Brodowski
03450e271a fs: add ksys_fchmod() and do_fchmodat() helpers and ksys_chmod() wrapper; remove in-kernel calls to syscall
Using the fs-internal do_fchmodat() helper allows us to get rid of
fs-internal calls to the sys_fchmodat() syscall.

Introducing the ksys_fchmod() helper and the ksys_chmod() wrapper allows
us to avoid the in-kernel calls to the sys_fchmod() and sys_chmod()
syscalls. The ksys_ prefix denotes that these functions are meant as a
drop-in replacement for the syscalls. In particular, they use the same
calling convention as sys_fchmod() and sys_chmod().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:57 +02:00
Dominik Brodowski
447016e968 fs: add ksys_chdir() helper; remove in-kernel calls to sys_chdir()
Using this helper allows us to avoid the in-kernel calls to the sys_chdir()
syscall. The ksys_ prefix denotes that this function is meant as a drop-in
replacement for the syscall. In particular, it uses the same calling
convention as sys_chdir().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:51 +02:00
Dominik Brodowski
a16fe33ab5 fs: add ksys_chroot() helper; remove-in kernel calls to sys_chroot()
Using this helper allows us to avoid the in-kernel calls to the
sys_chroot() syscall. The ksys_ prefix denotes that this function is
meant as a drop-in replacement for the syscall. In particular, it uses the
same calling convention as sys_chroot().

In the near future, the fs-external callers of ksys_chroot() should be
converted to use kern_path()/set_fs_root() directly. Then ksys_chroot()
can be moved within sys_chroot() again.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:50 +02:00
Christoph Hellwig
cab64df194 fs: fold open_check_o_direct into do_dentry_open
do_dentry_open is where we do the actual open of the file, so this is
where we should do our O_DIRECT sanity check to cover all potential
callers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-28 01:39:01 -04:00