Commit Graph

53 Commits

Author SHA1 Message Date
Dmitry Monakhov
4418e14112 ext4: Fix fsync error handling after filesystem abort
If filesystem was aborted after inode's write back is complete
but before its metadata was updated we may return success
results in data loss.
In order to handle fs abort correctly we have to check
fs state once we discover that it is in MS_RDONLY state

Test case: http://patchwork.ozlabs.org/patch/244297

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-12 22:38:04 -04:00
Jan Kara
92e6222dfb ext4: remove i_mutex from ext4_file_sync()
After removal of ext4_flush_unwritten_io() call, ext4_file_sync()
doesn't need i_mutex anymore. Forcing of transaction commits doesn't
need i_mutex as there's nothing inode specific in that code apart from
grabbing transaction ids from the inode. So remove the lock.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:40:39 -04:00
Jan Kara
37b10dd063 ext4: use generic_file_fsync() in ext4_file_fsync() in nojournal mode
Just use the generic function instead of duplicating it.  We only need
to reshuffle the read-only check a bit (which is there to prevent
writing to a filesystem which has been remounted read-only after error
I assume).

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:40:09 -04:00
Jan Kara
b0857d309f ext4: defer clearing of PageWriteback after extent conversion
Currently PageWriteback bit gets cleared from put_io_page() called
from ext4_end_bio().  This is somewhat inconvenient as extent tree is
not fully updated at that time (unwritten extents are not marked as
written) so we cannot read the data back yet.  This design was
dictated by lock ordering as we cannot start a transaction while
PageWriteback bit is set (we could easily deadlock with
ext4_da_writepages()).  But now that we use transaction reservation
for extent conversion, locking issues are solved and we can move
PageWriteback bit clearing after extent conversion is done.  As a
result we can remove wait for unwritten extent conversion from
ext4_sync_file() because it already implicitely happens through
wait_on_page_writeback().

We implement deferring of PageWriteback clearing by queueing completed
bios to appropriate io_end and processing all the pages when io_end is
going to be freed instead of at the moment ext4_io_end() is called.

Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04 14:23:41 -04:00
Theodore Ts'o
d76a3a7711 ext4/jbd2: don't wait (forever) for stale tid caused by wraparound
In the case where an inode has a very stale transaction id (tid) in
i_datasync_tid or i_sync_tid, it's possible that after a very large
(2**31) number of transactions, that the tid number space might wrap,
causing tid_geq()'s calculations to fail.

Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified
by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily",
attempted to fix this problem, but it only avoided kjournald spinning
forever by fixing the logic in jbd2_log_start_commit().

Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c
that might call jbd2_log_start_commit() with a stale tid, those
functions will subsequently call jbd2_log_wait_commit() with the same
stale tid, and then wait for a very long time.  To fix this, we
replace the calls to jbd2_log_start_commit() and
jbd2_log_wait_commit() with a call to a new function,
jbd2_complete_transaction(), which will correctly handle stale tid's.

As a bonus, jbd2_complete_transaction() will avoid locking
j_state_lock for writing unless a commit needs to be started.  This
should have a small (but probably not measurable) improvement for
ext4's scalability.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: George Barnett <gbarnett@atlassian.com>
Cc: stable@vger.kernel.org
2013-04-03 22:02:52 -04:00
Andy Lutomirski
ad96f71155 ext4: fix an incorrect comment about i_mutex
i_mutex is not held when ->sync_file is called.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-25 13:31:52 -05:00
Guo Chao
64744e03c6 ext4: use sync_inode_metadata() when syncing inode metadata
We have a dedicated interface to sync inode metadata.  Use it to
simplify ext4's code some.

Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2012-12-10 14:06:03 -05:00
Dmitry Monakhov
c278531d39 ext4: fix ext4_flush_completed_IO wait semantics
BUG #1) All places where we call ext4_flush_completed_IO are broken
    because buffered io and DIO/AIO goes through three stages
    1) submitted io,
    2) completed io (in i_completed_io_list) conversion pended
    3) finished  io (conversion done)
    And by calling ext4_flush_completed_IO we will flush only
    requests which were in (2) stage, which is wrong because:
     1) punch_hole and truncate _must_ wait for all outstanding unwritten io
      regardless to it's state.
     2) fsync and nolock_dio_read should also wait because there is
        a time window between end_page_writeback() and ext4_add_complete_io()
        As result integrity fsync is broken in case of buffered write
        to fallocated region:
        fsync                                      blkdev_completion
	 ->filemap_write_and_wait_range
                                                   ->ext4_end_bio
                                                     ->end_page_writeback
          <-- filemap_write_and_wait_range return
	 ->ext4_flush_completed_IO
   	 sees empty i_completed_io_list but pended
   	 conversion still exist
                                                     ->ext4_add_complete_io

BUG #2) Race window becomes wider due to the 'ext4: completed_io
locking cleanup V4' patch series

This patch make following changes:
1) ext4_flush_completed_io() now first try to flush completed io and when
   wait for any outstanding unwritten io via ext4_unwritten_wait()
2) Rename function to more appropriate name.
3) Assert that all callers of ext4_flush_unwritten_io should hold i_mutex to
   prevent endless wait

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2012-10-05 11:31:55 -04:00
Dmitry Monakhov
28a535f9a0 ext4: completed_io locking cleanup
Current unwritten extent conversion state-machine is very fuzzy.
- For unknown reason it performs conversion under i_mutex. What for?
  My diagnosis:
  We already protect extent tree with i_data_sem, truncate and punch_hole
  should wait for DIO, so the only data we have to protect is end_io->flags
  modification, but only flush_completed_IO and end_io_work modified this
  flags and we can serialize them via i_completed_io_lock.

  Currently all these games with mutex_trylock result in the following deadlock
   truncate:                          kworker:
    ext4_setattr                       ext4_end_io_work
    mutex_lock(i_mutex)
    inode_dio_wait(inode)  ->BLOCK
                             DEADLOCK<- mutex_trylock()
                                        inode_dio_done()
  #TEST_CASE1_BEGIN
  MNT=/mnt_scrach
  unlink $MNT/file
  fallocate -l $((1024*1024*1024)) $MNT/file
  aio-stress -I 100000 -O -s 100m -n -t 1 -c 10 -o 2 -o 3 $MNT/file
  sleep 2
  truncate -s 0 $MNT/file
  #TEST_CASE1_END

Or use 286's xfstests https://github.com/dmonakhov/xfstests/blob/devel/286

This patch makes state machine simple and clean:

(1) xxx_end_io schedule final extent conversion simply by calling
    ext4_add_complete_io(), which append it to ei->i_completed_io_list
    NOTE1: because of (2A) work should be queued only if
    ->i_completed_io_list was empty, otherwise the work is scheduled already.

(2) ext4_flush_completed_IO is responsible for handling all pending
    end_io from ei->i_completed_io_list
    Flushing sequence consists of following stages:
    A) LOCKED: Atomically drain completed_io_list to local_list
    B) Perform extents conversion
    C) LOCKED: move converted io's to to_free list for final deletion
       	     This logic depends on context which we was called from.
    D) Final end_io context destruction
    NOTE1: i_mutex is no longer required because end_io->flags modification
    is protected by ei->ext4_complete_io_lock

Full list of changes:
- Move all completion end_io related routines to page-io.c in order to improve
  logic locality
- Move open coded logic from various xx_end_xx routines to ext4_add_complete_io()
- remove EXT4_IO_END_FSYNC
- Improve SMP scalability by removing useless i_mutex which does not
  protect io->flags anymore.
- Reduce lock contention on i_completed_io_lock by optimizing list walk.
- Rename ext4_end_io_nolock to end4_end_io and make it static
- Check flush completion status to ext4_ext_punch_hole(). Because it is
  not good idea to punch blocks from corrupted inode.

Changes since V3 (in request to Jan's comments):
  Fall back to active flush_completed_IO() approach in order to prevent
  performance issues with nolocked DIO reads.
Changes since V2:
  Fix use-after-free caused by race truncate vs end_io_work

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-09-29 00:14:55 -04:00
Theodore Ts'o
a4a39040e9 ext4: check return value of blkdev_issue_flush()
blkdev_issue_flush() can fail; make sure the error gets properly
propagated.
    
This is a port of the equivalent ext3 patch from commit 44f4f729e7.
    
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-08-17 09:58:17 -04:00
Al Viro
b3d9b7a3c7 vfs: switch i_dentry/d_alias to hlist
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:32:55 +04:00
Al Viro
9f713878f2 ext4: get rid of open-coded d_find_any_alias()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:32:54 +04:00
Jeff Moyer
491caa4363 ext4: fix race between sync and completed io work
The following command line will leave the aio-stress process unkillable
on an ext4 file system (in my case, mounted on /mnt/test):

aio-stress -t 20 -s 10 -O -S -o 2 -I 1000 /mnt/test/aiostress.3561.4 /mnt/test/aiostress.3561.4.20 /mnt/test/aiostress.3561.4.19 /mnt/test/aiostress.3561.4.18 /mnt/test/aiostress.3561.4.17 /mnt/test/aiostress.3561.4.16 /mnt/test/aiostress.3561.4.15 /mnt/test/aiostress.3561.4.14 /mnt/test/aiostress.3561.4.13 /mnt/test/aiostress.3561.4.12 /mnt/test/aiostress.3561.4.11 /mnt/test/aiostress.3561.4.10 /mnt/test/aiostress.3561.4.9 /mnt/test/aiostress.3561.4.8 /mnt/test/aiostress.3561.4.7 /mnt/test/aiostress.3561.4.6 /mnt/test/aiostress.3561.4.5 /mnt/test/aiostress.3561.4.4 /mnt/test/aiostress.3561.4.3 /mnt/test/aiostress.3561.4.2

This is using the aio-stress program from the xfstests test suite.
That particular command line tells aio-stress to do random writes to
20 files from 20 threads (one thread per file).  The files are NOT
preallocated, so you will get writes to random offsets within the
file, thus creating holes and extending i_size.  It also opens the
file with O_DIRECT and O_SYNC.

On to the problem.  When an I/O requires unwritten extent conversion,
it is queued onto the completed_io_list for the ext4 inode.  Two code
paths will pull work items from this list.  The first is the
ext4_end_io_work routine, and the second is ext4_flush_completed_IO,
which is called via the fsync path (and O_SYNC handling, as well).
There are two issues I've found in these code paths.  First, if the
fsync path beats the work routine to a particular I/O, the work
routine will free the io_end structure!  It does not take into account
the fact that the io_end may still be in use by the fsync path.  I've
fixed this issue by adding yet another IO_END flag, indicating that
the io_end is being processed by the fsync path.

The second problem is that the work routine will make an assignment to
io->flag outside of the lock.  I have witnessed this result in a hang
at umount.  Moving the flag setting inside the lock resolved that
problem.

The problem was introduced by commit b82e384c7b ("ext4: optimize
locking for end_io extent conversion"), which first appeared in 3.2.
As such, the fix should be backported to that release (probably along
with the unwritten extent conversion race fix).

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
CC: stable@kernel.org
2012-03-05 10:29:52 -05:00
Theodore Ts'o
b82e384c7b ext4: optimize locking for end_io extent conversion
Now that we are doing the locking correctly, we need to grab the
i_completed_io_lock() twice per end_io.  We can clean this up by
removing the structure from the i_complted_io_list, and use this as
the locking mechanism to prevent ext4_flush_completed_IO() racing
against ext4_end_io_work(), instead of clearing the
EXT4_IO_END_UNWRITTEN in io->flag.

In addition, if the ext4_convert_unwritten_extents() returns an error,
we no longer keep the end_io structure on the linked list.  This
doesn't help, because it tends to lock up the file system and wedges
the system.  That's one way to call attention to the problem, but it
doesn't help the overall robustness of the system.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-31 10:56:32 -04:00
Tao Ma
d73d5046a7 ext4: Use correct locking for ext4_end_io_nolock()
We must hold i_completed_io_lock when manipulating anything on the
i_completed_io_list linked list.  This includes io->lock, which we
were checking in ext4_end_io_nolock().

So move this check to ext4_end_io_work().  This also has the bonus of
avoiding extra work if it is already done without needing to take the
mutex.

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-30 18:26:08 -04:00
H Hartley Sweeten
e0cbee3e14 ext4: functions should not be declared extern
The function declarations in ext4.h are already marked extern, so it's
not necessary to do so in the .c files.

This quiets the sparse noise:

warning: function 'ext4_flush_completed_IO' with external linkage has definition
warning: function 'ext4_init_inode_table' with external linkage has definition

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-10-18 10:57:51 -04:00
Linus Torvalds
60ad446682 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits)
  ext4: prevent memory leaks from ext4_mb_init_backend() on error path
  ext4: use EXT4_BAD_INO for buddy cache to avoid colliding with valid inode #
  ext4: use ext4_msg() instead of printk in mballoc
  ext4: use ext4_kvzalloc()/ext4_kvmalloc() for s_group_desc and s_group_info
  ext4: introduce ext4_kvmalloc(), ext4_kzalloc(), and ext4_kvfree()
  ext4: use the correct error exit path in ext4_init_inode_table()
  ext4: add missing kfree() on error return path in add_new_gdb()
  ext4: change umode_t in tracepoint headers to be an explicit __u16
  ext4: fix races in ext4_sync_parent()
  ext4: Fix overflow caused by missing cast in ext4_fallocate()
  ext4: add action of moving index in ext4_ext_rm_idx for Punch Hole
  ext4: simplify parameters of reserve_backup_gdb()
  ext4: simplify parameters of add_new_gdb()
  ext4: remove lock_buffer in bclean() and setup_new_group_blocks()
  ext4: simplify journal handling in setup_new_group_blocks()
  ext4: let setup_new_group_blocks() set multiple bits at a time
  ext4: fix a typo in ext4_group_extend()
  ext4: let ext4_group_add_blocks() handle 0 blocks quickly
  ext4: let ext4_group_add_blocks() return an error code
  ext4: rename ext4_add_groupblocks() to ext4_group_add_blocks()
  ...

Fix up conflict in fs/ext4/inode.c: commit aacfc19c62 ("fs: simplify
the blockdev_direct_IO prototype") had changed the ext4_ind_direct_IO()
function for the new simplified calling convention, while commit
dae1e52cb1 ("ext4: move ext4_ind_* functions from inode.c to
indirect.c") moved the function to another file.
2011-08-01 13:56:03 -10:00
Theodore Ts'o
d59729f4e7 ext4: fix races in ext4_sync_parent()
Fix problems if fsync() races against a rename of a parent directory
as pointed out by Al Viro in his own inimitable way:

>While we are at it, could somebody please explain what the hell is ext4
>doing in
>static int ext4_sync_parent(struct inode *inode)
>{
>        struct writeback_control wbc;
>        struct dentry *dentry = NULL;
>        int ret = 0;
>
>        while (inode && ext4_test_inode_state(inode, EXT4_STATE_NEWENTRY)) {
>                ext4_clear_inode_state(inode, EXT4_STATE_NEWENTRY);
>                dentry = list_entry(inode->i_dentry.next,
>                                    struct dentry, d_alias);
>                if (!dentry || !dentry->d_parent || !dentry->d_parent->d_inode)
>                        break;
>                inode = dentry->d_parent->d_inode;
>                ret = sync_mapping_buffers(inode->i_mapping);
>                ...
>Note that dentry obviously can't be NULL there.  dentry->d_parent is never
>NULL.  And dentry->d_parent would better not be negative, for crying out
>loud!  What's worse, there's no guarantees that dentry->d_parent will
>remain our parent over that sync_mapping_buffers() *and* that inode won't
>just be freed under us (after rename() and memory pressure leading to
>eviction of what used to be our dentry->d_parent)......

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-07-30 12:34:19 -04:00
Josef Bacik
02c24a8218 fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers.  Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2.  For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:59 -04:00
Jan Kara
93628ffb9b ext4: fix waiting and sending of a barrier in ext4_sync_file()
jbd2_log_start_commit() returns 1 only when we really start a
transaction.  But we also need to wait for a transaction when the
commit is already running.  Fix this problem by waiting for
transaction commit unconditionally (which is just a quick check if the
transaction is already committed).

Also we have to be more careful with sending of a barrier because when
transaction is being committed in parallel to ext4_sync_file()
running, we cannot be sure that the barrier the journalling code sends
happens after we wrote all the data for fsync (note that not every
data writeout needs to trigger metadata changes thus commit of some
metadata changes can be running while other data is still written
out). So use jbd2_will_send_data_barrier() helper to detect the common
cases when we can be sure barrier will be issued by the commit code
and issue the barrier ourselves in the remaining cases.

Reported-by: Edward Goggin <egoggin@vmware.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-24 12:00:54 -04:00
Tao Ma
e8bbe8c401 ext4: use EXT4FS_DEBUG instead of EXT4_DEBUG in fsync.c
We have EXT4FS_DEBUG for some old debug and CONFIG_EXT4_DEBUG
for the new mballoc debug, but there isn't any EXT4_DEBUG.

As CONFIG_EXT4_DEBUG seems to be only used in mballoc, use
EXT4FS_DEBUG in fsync.c.

[ It doesn't really matter; although I'm including this commit for
  consistency's sake.  The whole point of the #ifdef's is to disable
  the debugging code.  In general you're not going to want to enable
  all of the code protected by EXT4FS_DEBUG at the same time.  -- Ted ]

Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-05-09 10:25:54 -04:00
Linus Torvalds
a97b52022a Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix data corruption regression by reverting commit 6de9843dab
  ext4: Allow indirect-block file to grow the file size to max file size
  ext4: allow an active handle to be started when freezing
  ext4: sync the directory inode in ext4_sync_parent()
  ext4: init timer earlier to avoid a kernel panic in __save_error_info
  jbd2: fix potential memory leak on transaction commit
  ext4: fix a double free in ext4_register_li_request
  ext4: fix credits computing for indirect mapped files
  ext4: remove unnecessary [cm]time update of quota file
  jbd2: move bdget out of critical section
2011-04-11 15:45:47 -07:00
Curt Wohlgemuth
0893ed458b ext4: sync the directory inode in ext4_sync_parent()
ext4 has taken the stance that, in the absence of a journal,
when an fsync/fdatasync of an inode is done, the parent
directory should be sync'ed if this inode entry is new.
ext4_sync_parent(), which implements this, does indeed sync
the dirent pages for parent directories, but it does not
sync the directory *inode*.  This patch fixes this.

Also now return error status from ext4_sync_parent().

I tested this using a power fail test, which panics a
machine running a file server getting requests from a
client.  Without this patch, on about every other test run,
the server is missing many, many files that had been synced.
With this patch, on > 6 runs, I see zero files being lost.

Google-Bug-Id: 4179519
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-10 22:05:31 -04:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Jiaying Zhang
0562e0bad4 ext4: add more tracepoints and use dev_t in the trace buffer
- Add more ext4 tracepoints.
- Change ext4 tracepoints to use dev_t field with MAJOR/MINOR macros
so that we can save 4 bytes in the ring buffer on some platforms.
- Add sync_mode to ext4_da_writepages, ext4_da_write_pages, and
ext4_da_writepages_result tracepoints. Also remove for_reclaim
field from ext4_da_writepages since it is usually not very useful.

Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-03-21 21:38:05 -04:00
Jiaying Zhang
3889fd57ea ext4: flush the i_completed_io_list during ext4_truncate
Ted first found the bug when running 2.6.36 kernel with dioread_nolock
mount option that xfstests #13 complained about wrong file size during fsck.
However, the bug exists in the older kernels as well although it is
somehow harder to trigger.

The problem is that ext4_end_io_work() can happen after we have truncated an
inode to a smaller size. Then when ext4_end_io_work() calls 
ext4_convert_unwritten_extents(), we may reallocate some blocks that have 
been truncated, so the inode size becomes inconsistent with the allocated
blocks. 

The following patch flushes the i_completed_io_list during truncate to reduce 
the risk that some pending end_io requests are executed later and convert 
already truncated blocks to initialized. 

Note that although the fix helps reduce the problem a lot there may still 
be a race window between vmtruncate() and ext4_end_io_work(). The fundamental
problem is that if vmtruncate() is called without either i_mutex or i_alloc_sem
held, it can race with an ongoing write request so that the io_end request is
processed later when the corresponding blocks have been truncated.

Ted and I have discussed the problem offline and we saw a few ways to fix
the race completely:

a) We guarantee that i_mutex lock and i_alloc_sem write lock are both hold 
whenever vmtruncate() is called. The i_mutex lock prevents any new write
requests from entering writeback and the i_alloc_sem prevents the race
from ext4_page_mkwrite(). Currently we hold both locks if vmtruncate()
is called from do_truncate(), which is probably the most common case.
However, there are places where we may call vmtruncate() without holding
either i_mutex or i_alloc_sem. I would like to ask for other people's
opinions on what locks are expected to be held before calling vmtruncate().
There seems a disagreement among the callers of that function.

b) We change the ext4 write path so that we change the extent tree to contain 
the newly allocated blocks and update i_size both at the same time --- when 
the write of the data blocks is completed.

c) We add some additional locking to synchronize vmtruncate() and 
ext4_end_io_work(). This approach may have performance implications so we
need to be careful.

All of the above proposals may require more substantial changes, so
we may consider to take the following patch as a bandaid.

Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10 12:47:05 -05:00
Theodore Ts'o
a107e5a3a4 Merge branch 'next' into upstream-merge
Conflicts:
	fs/ext4/inode.c
	fs/ext4/mballoc.c
	include/trace/events/ext4.h
2010-10-27 23:44:47 -04:00
Theodore Ts'o
4a873a472b ext4: move flush_completed_IO to fs/ext4/fsync.c and make it static
Fix a namespace leak by moving the function to the file where it is
used and making it static.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:14 -04:00
Christoph Hellwig
dd3932eddf block: remove BLKDEV_IFL_WAIT
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller.  To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead.  So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout.  For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-16 20:52:58 +02:00
Christoph Hellwig
1b061d9247 rename the generic fsync implementations
We don't name our generic fsync implementations very well currently.
The no-op implementation for in-memory filesystems currently is called
simple_sync_file which doesn't make too much sense to start with,
the the generic one for simple filesystems is called simple_fsync
which can lead to some confusion.

This patch renames the generic file fsync method to generic_file_fsync
to match the other generic_file_* routines it is supposed to be used
with, and the no-op implementation to noop_fsync to make it obvious
what to expect.  In addition add some documentation for both methods.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:06:06 -04:00
Christoph Hellwig
7ea8085910 drop unused dentry argument to ->fsync
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:05:02 -04:00
Linus Torvalds
e4ce30f377 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: Make fsync sync new parent directories in no-journal mode
  ext4: Drop whitespace at end of lines
  ext4: Fix compat EXT4_IOC_ADD_GROUP
  ext4: Conditionally define compat ioctl numbers
  tracing: Convert more ext4 events to DEFINE_EVENT
  ext4: Add new tracepoints to track mballoc's buddy bitmap loads
  ext4: Add a missing trace hook
  ext4: restart ext4_ext_remove_space() after transaction restart
  ext4: Clear the EXT4_EOFBLOCKS_FL flag only when warranted
  ext4: Avoid crashing on NULL ptr dereference on a filesystem error
  ext4: Use bitops to read/modify i_flags in struct ext4_inode_info
  ext4: Convert calls of ext4_error() to EXT4_ERROR_INODE()
  ext4: Convert callers of ext4_get_blocks() to use ext4_map_blocks()
  ext4: Add new abstraction ext4_map_blocks() underneath ext4_get_blocks()
  ext4: Use our own write_cache_pages()
  ext4: Show journal_checksum option
  ext4: Fix for ext4_mb_collect_stats()
  ext4: check for a good block group before loading buddy pages
  ext4: Prevent creation of files larger than RLIMIT_FSIZE using fallocate
  ext4: Remove extraneous newlines in ext4_msg() calls
  ...

Fixed up trivial conflict in fs/ext4/fsync.c
2010-05-27 10:26:37 -07:00
Frank Mayhar
14ece1028b ext4: Make fsync sync new parent directories in no-journal mode
Add a new ext4 state to tell us when a file has been newly created; use
that state in ext4_sync_file in no-journal mode to tell us when we need
to sync the parent directory as well as the inode and data itself.  This
fixes a problem in which a panic or power failure may lose the entire
file even when using fsync, since the parent directory entry is lost.

Addresses-Google-Bug: #2480057

Signed-off-by: Frank Mayhar <fmayhar@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-17 08:00:00 -04:00
Theodore Ts'o
60e6679e28 ext4: Drop whitespace at end of lines
This patch was generated using:

#!/usr/bin/perl -i
while (<>) {
    s/[ 	]+$//;
    print;
}

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-17 07:00:00 -04:00
Dmitry Monakhov
0671e70465 ext4: check missed return value in ext4_sync_file()
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-10 00:00:00 -04:00
Dmitry Monakhov
fbd9b09a17 blkdev: generalize flags for blkdev_issue_fn functions
The patch just convert all blkdev_issue_xxx function to common
set of flags. Wait/allocation semantics preserved.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-28 19:47:36 +02:00
Jiaying Zhang
c7064ef13b ext4: mechanical rename some of the direct I/O get_block's identifiers
This commit renames some of the direct I/O's block allocation flags,
variables, and functions introduced in Mingming's "Direct IO for holes
and fallocate" patches so that they can be used by ext4's buffered
write path as well.  Also changed the related function comments
accordingly to cover both direct write and buffered write cases.

Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-03-02 13:28:44 -05:00
Theodore Ts'o
cc3e1bea5d ext4, jbd2: Add barriers for file systems with exernal journals
This is a bit complicated because we are trying to optimize when we
send barriers to the fs data disk.  We could just throw in an extra
barrier to the data disk whenever we send a barrier to the journal
disk, but that's not always strictly necessary.

We only need to send a barrier during a commit when there are data
blocks which are must be written out due to an inode written in
ordered mode, or if fsync() depends on the commit to force data blocks
to disk.  Finally, before we drop transactions from the beginning of
the journal during a checkpoint operation, we need to guarantee that
any blocks that were flushed out to the data disk are firmly on the
rust platter before we drop the transaction from the journal.

Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-23 06:52:08 -05:00
Jan Kara
b436b9bef8 ext4: Wait for proper transaction commit on fsync
We cannot rely on buffer dirty bits during fsync because pdflush can come
before fsync is called and clear dirty bits without forcing a transaction
commit. What we do is that we track which transaction has last changed
the inode and which transaction last changed allocation and force it to
disk on fsync.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-12-08 23:51:10 -05:00
Theodore Ts'o
6b17d902fd ext4: avoid issuing unnecessary barriers
We don't to issue an I/O barrier on an error or if we force commit
because we are doing data journaling.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
2009-11-23 07:24:57 -05:00
Mingming Cao
8d5d02e6b1 ext4: async direct IO for holes and fallocate support
For async direct IO that covers holes or fallocate, the end_io
callback function now queued the convertion work on workqueue but
don't flush the work rightaway as it might take too long to afford.

But when fsync is called after all the data is completed, user expects
the metadata also being updated before fsync returns.

Thus we need to flush the conversion work when fsync() is called.
This patch keep track of a listed of completed async direct io that
has a work queued on workqueue.  When fsync() is called, it will go
through the list and do the conversion.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2009-09-28 15:48:29 -04:00
Theodore Ts'o
fe188c0e08 ext4: Assure that metadata blocks are written during fsync in no journal mode
When there is no journal present, we must attach buffer heads
associated with extent tree and indirect blocks to the inode's
mapping->private_list via mark_buffer_dirty_inode() so that
ext4_sync_file() --- which is called to service fsync() and
fdatasync() system calls --- can write out the inode's metadata blocks
by calling sync_mapping_buffers().

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-12 13:41:55 -04:00
Christoph Hellwig
5f3481e9a8 ext4: fix cache flush in ext4_sync_file
We need to flush the write cache unconditionally in ->fsync, otherwise
writes into already allocated blocks can get lost.  Writes into fully
allocated files are very common when using disk images for
virtualization, and without this fix can easily lose data after
an fdatasync, which is the typical implementation for a cache flush on
the virtual drive.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-09-05 21:42:42 -04:00
Theodore Ts'o
9bffad1ed2 ext4: convert instrumentation from markers to tracepoints
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-17 11:48:11 -04:00
Theodore Ts'o
ede86cc473 ext4: Add debugging markers that can be used by systemtap
This debugging markers are designed to debug problems such as the
random filesystem latency problems reported by Arjan.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-05 20:50:06 -04:00
Theodore Ts'o
af5bc92dde ext4: Fix whitespace checkpatch warnings/errors
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 22:25:24 -04:00
Eric Sandeen
d755fb3842 ext4: call blkdev_issue_flush on fsync
To ensure that bits are truly on-disk after an fsync,
we should call blkdev_issue_flush if barriers are supported.

Inspired by an old thread on barriers, by reiserfs & xfs
which do the same, and by a patch SuSE ships with their kernel

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-11 19:27:31 -04:00
Christoph Hellwig
3dcf54515a ext4: move headers out of include/linux
Move ext4 headers out of include/linux.  This is just the trivial move,
there's some more thing that could be done later. 

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 18:13:32 -04:00
Hisashi Hifumi
53c550e975 ext4: fdatasync should skip metadata writeout when overwriting
Currently fdatasync is identical to fsync in ext3.

I think fdatasync should skip journal flush in data=ordered and
data=writeback mode when it overwrites to already-instantiated blocks on
HDD.  When I_DIRTY_DATASYNC flag is not set, fdatasync should skip journal
writeout because this indicates only atime or/and mtime updates.

Following patch is the same approach of ext2's fsync code(ext2_sync_file).

I did a performance test using the sysbench.

#sysbench --num-threads=128 --max-requests=50000 --test=fileio --file-total-size=128G
--file-test-mode=rndwr --file-fsync-mode=fdatasync run

The result on ext3 was:

	-2.6.24
	Operations performed:  0 Read, 50080 Write, 59600 Other = 109680 Total
	Read 0b  Written 782.5Mb  Total transferred 782.5Mb  (12.116Mb/sec)
	  775.45 Requests/sec executed

	Test execution summary:
	    total time:                          64.5814s
	    total number of events:              50080
	    total time taken by event execution: 3713.9836
	    per-request statistics:
	         min:                            0.0000s
	         avg:                            0.0742s
	         max:                            0.9375s
	         approx.  95 percentile:         0.2901s

	Threads fairness:
	    events (avg/stddev):           391.2500/23.26
	    execution time (avg/stddev):   29.0155/1.99

	-2.6.24-patched
	Operations performed:  0 Read, 50009 Write, 61596 Other = 111605 Total
	Read 0b  Written 781.39Mb  Total transferred 781.39Mb  (16.419Mb/sec)
	1050.83 Requests/sec executed

	Test execution summary:
	    total time:                          47.5900s
	    total number of events:              50009
	    total time taken by event execution: 2934.5768
	    per-request statistics:
 	         min:                            0.0000s
	         avg:                            0.0587s
 	         max:                            0.8938s
	         approx.  95 percentile:         0.1993s

	Threads fairness:
	    events (avg/stddev):           390.6953/22.64
	    execution time (avg/stddev):   22.9264/1.17

Filesystem I/O throughput was improved.

Signed-off-by :Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Aneesh Kumar K.V
ac39849ddc ext4: sparse fixes
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-17 18:50:03 -04:00