checkpatch -f found 3 warnings in RDMA/rxe
1. a missing space following switch
2. return followed by else
3. use of strlcpy() instead of strscpy().
This patch fixes each of these. In
...
} elseif (...) {
...
return 0;
} else
...
The middle block can be safely moved since it is completely independent of
the other code.
Link: https://lore.kernel.org/r/20210205230525.49068-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cleanup the synchronize_srcu() from the ODP flow as it was found to be a
very heavy time consumer as part of dereg_mr.
For example de-registration of 10000 ODP MRs each with size of 2M hugepage
took 19.6 sec comparing de-registration of same number of non ODP MRs that
took 172 ms.
The new locking scheme uses the wait_event() mechanism which follows the
use count of the MR instead of using synchronize_srcu().
By that change, the time required for the above test took 95 ms which is
even better than the non ODP flow.
Once fully dropped the srcu usage, had to come with a lock to protect the
XA access.
As part of using the above mechanism we could also clean the
num_deferred_work stuff and follow the use count instead.
Link: https://lore.kernel.org/r/20210202071309.2057998-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to use a for loop to assign values for an array of cmd
descriptors which has only two elements.
Link: https://lore.kernel.org/r/1612517974-31867-13-git-send-email-liweihang@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hns driver wrap around the consumer index of AEQ and CEQ when they
reach to two times of queue entries number for owner mechanism, actually,
it is unnecessary to wrap around since the hardware itself will mask it
before use.
Link: https://lore.kernel.org/r/1612517974-31867-12-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All fields of WQE will be rewrote, so the memset is unnecessary. And when
SQ is working in OWNER mode, the pipeline may prefetch the WQEs beyond PI,
the memset operation may flip the owner bit too early, then the pipeline
may get a wrong WQ.
Link: https://lore.kernel.org/r/1612517974-31867-11-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use macros instead of magic numbers to represent shift of dma_handle_wqe,
dma_handle_idx and UDP destination port number of RoCEv2.
Link: https://lore.kernel.org/r/1612517974-31867-10-git-send-email-liweihang@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hns_roce_device.h is not specific to hardware, some definitions are only
used for HIP06, they should be moved into hns_roce_hw_v1.h.
Link: https://lore.kernel.org/r/1612517974-31867-9-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, the driver updates doorbell looks like this:
post()
{
wqe.field = 0x111;
wmb();
update_wq_db();
}
update_wq_db()
{
db.field = 0x222;
__raw_writeq(db, db_reg);
}
writeq() is a better choice than __raw_writeq() because it calls dma_wmb()
to barrier in ARM64, and dma_wmb() is better than wmb() for ROCEE device.
This patch removes all wmb() before updating doorbell of SQ/RQ/CQ/SRQ by
replacing __raw_writeq() with writeq() to improve performence. The new
process looks like this:
post()
{
wqe.field = 0x111;
update_wq_db();
}
update_wq_db()
{
db.field = 0x222;
writeq(db, db_reg);
}
Link: https://lore.kernel.org/r/1612517974-31867-8-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This feature should only be enabled by querying capability from firmware.
Fixes: ba6bb7e974 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1612517974-31867-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the mapped page count checking flow to avoid invalid page size when
creating MTR.
Fixes: 38389eaa4d ("RDMA/hns: Add mtr support for mixed multihop addressing")
Link: https://lore.kernel.org/r/1612517974-31867-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This bit should be in type of enum ib_sig_type, or there will be a sparse
warning.
Fixes: bfe860351e ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1612517974-31867-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ULP usually set IB(V)_QP_AV when trying to modify QP to RTR if they want
to record sgid index into QPC. For UD QPs, it is useless because it will
be included in WQE. For RC QPs, it will be filled in
hns_roce_set_path(). So sgid index shouldn't be filled by default. Then
hns_get_gid_index() is moved to hns_roce_hw_v1.c because it is only called
in it.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1612517974-31867-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Direct wqe is a mechanism to fill wqe directly into the hardware. In the
case of light load, the wqe will be filled into pcie bar space of the
hardware, this will reduce one memory access operation and therefore
reduce the latency.
Link: https://lore.kernel.org/r/1611997513-27107-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The SRQ in the hns driver consists of the following four parts:
* wqe buf: the buffer to store WQE.
* wqe_idx buf: the cqe of SRQ may be not generated in the order of wqe, so
the wqe_idx corresponding to the idle WQE needs to be pushed into the
index queue which is a FIFO, then it instructs the hardware to obtain
the corresponding WQE.
* bitmap: bitmap is used to generate and release wqe_idx. When the user
has a new WR, the driver finds the idx of the idle wqe in bitmap. When
the CQE of wqe is generated, the driver will release the idx.
* wr_id buf: wr_id buf is used to store the user's wr_id, then return it
to the user when poll_cq verb is invoked.
The process of post SRQ recv is refactored to make preceding code clearer.
Link: https://lore.kernel.org/r/1611997090-48820-12-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HIP09 requires the driver to clear the unused data segments in wqe
buffer to make the hns ROCEE stop reading the remaining invalid sges for
RQ.
Link: https://lore.kernel.org/r/1611997090-48820-11-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reduce parameter numbers of write_srqc() and move some related code into
it from alloc_srqc().
Link: https://lore.kernel.org/r/1611997090-48820-8-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split the SRQ creation process into multiple steps and encapsulate them
into functions.
Link: https://lore.kernel.org/r/1611997090-48820-7-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each SRQs contain an reserved WQE, it is inappropriate and should be
removed.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-6-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When an error occurs, the qp_table must be cleared, regardless of whether
the SRQ feature is enabled.
Fixes: 5c1f167af1 ("RDMA/hns: Init SRQ table for hip08")
Link: https://lore.kernel.org/r/1611997090-48820-5-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB Specification, srq_limit shouldn't be configured
during SRQ creation. If a user set srq_limit at this time, the driver
should forced it to zero, or the result of creating SRQ will conflict with
the result of querying SRQ.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If a user posts WR by wr_list, the head pointer of idx_queue won't be
updated until all wqes are filled, so the judgment of whether head equals
to tail will get a wrong result. Fix above issue and move the head and
tail pointer from the srq structure into the idx_queue structure. After
idx_queue is filled with wqe idx, the head pointer of it will increase.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RQ/SRQ of HIP08 needs one special sge to stop receive reliably. So the
driver needs to allocate at least one SGE when creating RQ/SRQ and ensure
that at least one SGE is filled with the special value during post_recv.
Besides, the kernel driver should only do this for kernel ULP. For
userspace ULP, the userspace driver will allocate the reserved SGE in
buffer, and the kernel driver just needs to pin the corresponding size of
memory based on the userspace driver's requirements.
Link: https://lore.kernel.org/r/1611997090-48820-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_udp_encap_recv() drops the reference to rxe->ib_dev taken by
rxe_get_dev_from_net() which should be held until each received skb is
freed. This patch moves the calls to ib_device_put() to each place a
received skb is freed. It also takes references to the ib_device for each
cloned skb created to process received multicast packets.
Fixes: 4c173f596b ("RDMA/rxe: Use ib_device_get_by_netdev() instead of open coding")
Link: https://lore.kernel.org/r/20210128233318.2591-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_net.c sends packets at the IP layer with skb->data pointing at the IP
header but receives packets from a UDP tunnel with skb->data pointing at
the UDP header. On the loopback path this was not correctly accounted
for. This patch corrects for this by using sbk_pull() to strip the IP
header from the skb on received packets.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210128182301.16859-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_rcv_mcast_pkt() in rxe_recv.c can leak SKBs in error path code. The
loop over the QPs attached to a multicast group creates new cloned SKBs
for all but the last QP in the list and passes the SKB and its clones to
rxe_rcv_pkt() for further processing. Any QPs that do not pass some checks
are skipped. If the last QP in the list fails the tests the SKB is
leaked. This patch checks if the SKB for the last QP was used and if not
frees it. Also removes a redundant loop invariant assignment.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Fixes: 71abf20b28 ("RDMA/rxe: Handle skb_clone() failure in rxe_recv.c")
Link: https://lore.kernel.org/r/20210128174752.16128-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In check_keys() in rxe_recv.c
if ((...) && pkt->mask) {
...
}
always has pkt->mask non zero since in rxe_udp_encap_recv() pkt->mask is
always set to RXE_GRH_MASK (!= 0). There is no obvious reason for this
additional test and the original intent is lost. This patch simplifies the
expression.
Fixes: 8b7b59d030 ("IB/rxe: remove redudant qpn check")
Link: https://lore.kernel.org/r/20210127224203.2812-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
check_type_state() in rxe_recv.c is written as if the type bits in the
packet opcode were a bit mask which is not correct. This patch corrects
this code to compare all 3 type bits to the required type.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210127214500.3707-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of open coding the loop for port iteration, use rdma_for_each_port
macro provided by core.
To use such macro, early initialization of phys_port_cnt is needed.
Hence, initialize such constant early enough in the init stage.
Whichever functions are called with port using rdma_for_each_port(),
convert their port type from u8 to unsigned int to match the core API.
Link: https://lore.kernel.org/r/20210203130133.4057329-6-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently mlx5 driver caches port GID table length for 2 ports. It is
also cached by IB core as port immutable data.
When mlx5 representor ports are present, which are usually more than 2,
invalid access to port_caps array can happen while validating the GID
table length which is only for 2 ports.
To avoid this, take help of the IB cores port immutable data by exposing
an API to read the port immutable fields.
Remove mlx5 driver's internal cache, thereby reduce code and data.
Link: https://lore.kernel.org/r/20210203130133.4057329-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Improve query port functionality for representor port as below.
1. RoCE Qkey violation counters are not applicable for representor port.
2. Avoid setting gid_tbl_len twice for representor port.
3. Avoid setting ip_gids and IB_PORT_CM_SUP property for representor port
as GID table is empty and CM support is not present in representor
mode.
Link: https://lore.kernel.org/r/20210203130133.4057329-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pkey table length for all the ports of the device is the same. Currently
get_ports_cap() reads and stores it for each port by querying the device
which reads more than just pkey table length.
For representor device ports which can be in range of hundreds, it queries
is for each such port and end up returning same value for all the ports.
When in representor mode, modify QP accesses pkey port caps for a port
index that can be outside of the port_caps table.
Hence, simplify the logic to query the max pkey table length only once
during device initialization sequence.
Link: https://lore.kernel.org/r/20210203130133.4057329-3-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5_port_caps are RDMA specific capabilities. These are not used by the
mlx5_core_device at all. Move them to mlx5_ib_dev where it is used and
reduce the scope of it to multiple drivers.
Link: https://lore.kernel.org/r/20210203130133.4057329-2-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Representor port has only one default pkey. Hence have simpler query pkey
callback or it.
Link: https://lore.kernel.org/r/20210127150010.1876121-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
IB HCA port starts from 1. Use IB core provided port iterator API to avoid
any assumption with start port number.
Link: https://lore.kernel.org/r/20210127150010.1876121-11-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use IB core provided routine to check if the port is valid or not and to
iterate over IB ports.
Link: https://lore.kernel.org/r/20210127150010.1876121-10-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When RDMA device has 255 ports, loop iterator i overflows. Due to which
cm_add_one() port iterator loops infinitely. Use core provided port
iterator to avoid the infinite loop.
Fixes: a977049dac ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20210127150010.1876121-9-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When mlx5_ib_stage_init_init() fails, return the error code related to
failure instead of -ENOMEM.
Fixes: 16c1975f10 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Link: https://lore.kernel.org/r/20210127150010.1876121-8-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The 'select' field in the get/set feature admin command is unimplemented,
unused and misleading, remove it. The command always refers to the
current values.
Link: https://lore.kernel.org/r/20210126120702.9807-5-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The indentation in the subsequent comment lines is unnecessary, remove it.
Link: https://lore.kernel.org/r/20210126120702.9807-4-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The EFA_DMA_ADDR_TO_UINT32_HIGH/LOW macros are the same as the kernel's
upper/lower_32_bits, remove them and use kernel macros instead.
Link: https://lore.kernel.org/r/20210126120702.9807-3-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A pointer to store the command completion must be provided as it is always
used in efa_com_put_comp_ctx() to return the completion context back to
the pool. Remove the NULL pointer check and the redundant 'status' field
stored on the context as it could be retrieved from the completion itself.
Link: https://lore.kernel.org/r/20210126120702.9807-2-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/rc.c:1388: warning: Function parameter or member 'packet' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1388: warning: Function parameter or member 'is_fecn' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1388: warning: Excess function parameter 'qp' description in 'hfi1_send_rc_ack'
Link: https://lore.kernel.org/r/20210126124732.3320971-21-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/verbs.c:741: warning: Function parameter or member 'qp' not described in 'update_tx_opstats'
drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Function parameter or member 'pkey' not described in 'egress_pkey_check'
drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Excess function parameter 'bkey' description in 'egress_pkey_check'
drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'qp' not described in 'get_send_routine'
drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'ps' not described in 'get_send_routine'
Link: https://lore.kernel.org/r/20210126124732.3320971-20-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'fd' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'tidbuf' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'node' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'idx' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'npages' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:174: warning: Function parameter or member 'mapped' not described in 'unpin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:196: warning: Function parameter or member 'fd' not described in 'pin_rcv_pages'
drivers/infiniband/hw/hfi1/user_exp_rcv.c:196: warning: Function parameter or member 'tidbuf' not described in 'pin_rcv_pages'
Link: https://lore.kernel.org/r/20210126124732.3320971-19-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/ud.c:477: warning: Function parameter or member 'ps' not described in 'hfi1_make_ud_req'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Function parameter or member 'packet' not described in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'ibp' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'hdr' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'rcv_flags' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'data' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'tlen' description in 'hfi1_ud_rcv'
drivers/infiniband/hw/hfi1/ud.c:855: warning: Excess function parameter 'qp' description in 'hfi1_ud_rcv'
Link: https://lore.kernel.org/r/20210126124732.3320971-18-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/uc.c:64: warning: Function parameter or member 'ps' not described in 'hfi1_make_uc_req'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Function parameter or member 'packet' not described in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'ibp' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'hdr' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'rcv_flags' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'data' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'tlen' description in 'hfi1_uc_rcv'
drivers/infiniband/hw/hfi1/uc.c:306: warning: Excess function parameter 'qp' description in 'hfi1_uc_rcv'
Link: https://lore.kernel.org/r/20210126124732.3320971-17-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/tid_rdma.c:321: warning: Function parameter or member 'rdi' not described in 'qp_to_rcd'
drivers/infiniband/hw/hfi1/tid_rdma.c:321: warning: Function parameter or member 'qp' not described in 'qp_to_rcd'
drivers/infiniband/hw/hfi1/tid_rdma.c:505: warning: Function parameter or member 'queue' not described in 'kernel_tid_waiters'
drivers/infiniband/hw/hfi1/tid_rdma.c:536: warning: Function parameter or member 'rcd' not described in 'dequeue_tid_waiter'
drivers/infiniband/hw/hfi1/tid_rdma.c:536: warning: Function parameter or member 'queue' not described in 'dequeue_tid_waiter'
drivers/infiniband/hw/hfi1/tid_rdma.c:536: warning: Function parameter or member 'qp' not described in 'dequeue_tid_waiter'
drivers/infiniband/hw/hfi1/tid_rdma.c:562: warning: Function parameter or member 'queue' not described in 'queue_qp_for_tid_wait'
drivers/infiniband/hw/hfi1/tid_rdma.c:607: warning: Function parameter or member 'qp' not described in 'tid_rdma_schedule_tid_wakeup'
drivers/infiniband/hw/hfi1/tid_rdma.c:639: warning: Function parameter or member 'work' not described in 'tid_rdma_trigger_resume'
drivers/infiniband/hw/hfi1/tid_rdma.c:666: warning: Function parameter or member 'qp' not described in '_tid_rdma_flush_wait'
drivers/infiniband/hw/hfi1/tid_rdma.c:666: warning: Function parameter or member 'queue' not described in '_tid_rdma_flush_wait'
drivers/infiniband/hw/hfi1/tid_rdma.c:713: warning: Function parameter or member 'rcd' not described in 'kern_reserve_flow'
drivers/infiniband/hw/hfi1/tid_rdma.c:713: warning: Function parameter or member 'last' not described in 'kern_reserve_flow'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'flow' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'pages' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'npages' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:879: warning: Function parameter or member 'list' not described in 'tid_rdma_find_phys_blocks_4k'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'list' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'idx' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'pages' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:972: warning: Function parameter or member 'sets' not described in 'tid_flush_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'flow' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'pages' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'npages' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1017: warning: Function parameter or member 'list' not described in 'tid_rdma_find_phys_blocks_8k'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'flow' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'pages' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'ss' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1083: warning: Function parameter or member 'last' not described in 'kern_find_pages'
drivers/infiniband/hw/hfi1/tid_rdma.c:1604: warning: Function parameter or member 'req' not described in 'hfi1_kern_exp_rcv_free_flows'
drivers/infiniband/hw/hfi1/tid_rdma.c:3458: warning: Function parameter or member 'qp' not described in 'hfi1_tid_write_alloc_resources'
drivers/infiniband/hw/hfi1/tid_rdma.c:3458: warning: Function parameter or member 'intr_ctx' not described in 'hfi1_tid_write_alloc_resources'
Link: https://lore.kernel.org/r/20210126124732.3320971-16-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/sdma.c:2476: warning: Function parameter or member 'count_out' not described in 'sdma_send_txlist'
drivers/infiniband/hw/hfi1/sdma.c:2476: warning: Excess function parameter 'count' description in 'sdma_send_txlist'
Link: https://lore.kernel.org/r/20210126124732.3320971-15-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/ruc.c:277: warning: Function parameter or member 'bth1' not described in 'hfi1_make_ruc_header_16B'
drivers/infiniband/hw/hfi1/ruc.c:365: warning: Function parameter or member 'bth1' not described in 'hfi1_make_ruc_header_9B'
drivers/infiniband/hw/hfi1/ruc.c:472: warning: Function parameter or member 'tid' not described in 'hfi1_schedule_send_yield'
drivers/infiniband/hw/hfi1/ruc.c:472: warning: Excess function parameter 'timeout' description in 'hfi1_schedule_send_yield'
Link: https://lore.kernel.org/r/20210126124732.3320971-14-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/qp.c:195: warning: Function parameter or member 'dev' not described in 'verbs_mtu_enum_to_int'
drivers/infiniband/hw/hfi1/qp.c:195: warning: Function parameter or member 'mtu' not described in 'verbs_mtu_enum_to_int'
drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'qp' not described in 'hfi1_setup_wqe'
drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'wqe' not described in 'hfi1_setup_wqe'
drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'call_send' not described in 'hfi1_setup_wqe'
drivers/infiniband/hw/hfi1/qp.c:922: warning: Function parameter or member 'qp' not described in 'hfi1_qp_iter_cb'
drivers/infiniband/hw/hfi1/qp.c:922: warning: Function parameter or member 'v' not described in 'hfi1_qp_iter_cb'
Link: https://lore.kernel.org/r/20210126124732.3320971-13-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/rc.c:430: warning: Function parameter or member 'ps' not described in 'hfi1_make_rc_req'
drivers/infiniband/hw/hfi1/rc.c:1387: warning: Function parameter or member 'packet' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1387: warning: Function parameter or member 'is_fecn' not described in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:1387: warning: Excess function parameter 'qp' description in 'hfi1_send_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2008: warning: Function parameter or member 'aeth' not described in 'do_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2008: warning: Function parameter or member 'val' not described in 'do_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2008: warning: Function parameter or member 'rcd' not described in 'do_rc_ack'
drivers/infiniband/hw/hfi1/rc.c:2554: warning: Function parameter or member 'rcd' not described in 'rc_rcv_error'
Link: https://lore.kernel.org/r/20210126124732.3320971-12-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/pio_copy.c:73: warning: Function parameter or member 'dd' not described in 'pio_copy'
Link: https://lore.kernel.org/r/20210126124732.3320971-11-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/pcie.c:343: warning: Function parameter or member 'dd' not described in 'restore_pci_variables'
drivers/infiniband/hw/hfi1/pcie.c:402: warning: Function parameter or member 'dd' not described in 'save_pci_variables'
Link: https://lore.kernel.org/r/20210126124732.3320971-10-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/netdev_rx.c:473: warning: Function parameter or member 'start_id' not described in 'hfi1_netdev_get_first_data'
drivers/infiniband/hw/hfi1/netdev_rx.c:473: warning: Excess function parameter 'id' description in 'hfi1_netdev_get_first_data'
Link: https://lore.kernel.org/r/20210126124732.3320971-9-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/qp.c:1929: warning: Function parameter or member 'post_parms' not described in 'rvt_qp_valid_operation'
Link: https://lore.kernel.org/r/20210126124732.3320971-8-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mad.c:78: warning: Function parameter or member 'in_mad_size' not described in 'rvt_process_mad'
Link: https://lore.kernel.org/r/20210126124732.3320971-7-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/msix.c:120: warning: Function parameter or member 'name' not described in 'msix_request_irq'
drivers/infiniband/hw/hfi1/msix.c:120: warning: Excess function parameter 'idx' description in 'msix_request_irq'
Link: https://lore.kernel.org/r/20210126124732.3320971-6-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'am' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'data' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'resp_len' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'max_len' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:1354: warning: Function parameter or member 'local_mad' not described in '__subn_set_opa_portinfo'
drivers/infiniband/hw/hfi1/mad.c:4919: warning: Function parameter or member 'out_mad_size' not described in 'hfi1_process_mad'
drivers/infiniband/hw/hfi1/mad.c:4919: warning: Function parameter or member 'out_mad_pkey_index' not described in 'hfi1_process_mad'
Link: https://lore.kernel.org/r/20210126124732.3320971-5-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'tidfunc' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'wakeup' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'sdma_drained' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Function parameter or member 'init_priority' not described in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:52: warning: Excess function parameter 'resume' description in 'iowait_init'
drivers/infiniband/hw/hfi1/iowait.c:94: warning: Function parameter or member 'w' not described in 'iowait_set_work_flag'
Link: https://lore.kernel.org/r/20210126124732.3320971-4-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/srq.c:78: warning: Function parameter or member 'ibsrq' not described in 'rvt_create_srq'
drivers/infiniband/sw/rdmavt/srq.c:78: warning: Excess function parameter 'ibpd' description in 'rvt_create_srq'
drivers/infiniband/sw/rdmavt/srq.c:336: warning: Function parameter or member 'udata' not described in 'rvt_destroy_srq'
Link: https://lore.kernel.org/r/20210126124732.3320971-3-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/intr.c:99: warning: Function parameter or member 'msg' not described in 'format_hwmsg'
drivers/infiniband/hw/hfi1/intr.c:99: warning: Function parameter or member 'msgl' not described in 'format_hwmsg'
drivers/infiniband/hw/hfi1/intr.c:99: warning: Function parameter or member 'hwmsg' not described in 'format_hwmsg'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'hwerrs' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'hwerrmsgs' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'nhwerrmsgs' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'msg' not described in 'hfi1_format_hwerrors'
drivers/infiniband/hw/hfi1/intr.c:115: warning: Function parameter or member 'msgl' not described in 'hfi1_format_hwerrors'
Link: https://lore.kernel.org/r/20210126124732.3320971-2-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
One of the pool APIs for when caller is holding lock was not defined but
is declared in rxe_pool.h. This patch adds the definition.
Link: https://lore.kernel.org/r/20210125211641.2694-7-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_pool.c uses the field pool->state to mark a pool as invalid when it is
shut down and checks it in several pool APIs to verify that the pool has
not been shut down. This is unneeded because the pools are not marked
invalid unless the entire driver is being removed at which point no
functional APIs should or could be executing. This patch removes this
field and associated code.
Link: https://lore.kernel.org/r/20210125211641.2694-6-rpearson@hpe.com
Suggested-by: zyjzyj2000@gmail.c
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_pool.c takes references to the pool and ib_device structs for each
object allocated and also keeps an atomic num_elem count in each
pool. This is more work than is needed. Pool allocation is only called
from verbs APIs which already have references to ib_device and pools are
only diasbled when the driver is removed so no protection of the pool
addresses are needed. The elem count is used to warn if elements are still
present in a pool when it is cleaned up which is useful.
This patch eliminates the references to the ib_device and pool structs.
Link: https://lore.kernel.org/r/20210125211641.2694-5-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_alloc() used the RXE_POOL_ATOMIC flag in rxe_type_info to select
GFP_ATOMIC in calls to kzalloc(). This was intended to handle cases where
an object could be created in interrupt context. This no longer occurs
since allocating those objects has moved into the core so this flag is not
necessary. An incorrect use of this flag was still present for rxe_mc_elem
objects and is removed.
Link: https://lore.kernel.org/r/20210125211641.2694-4-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The names and comments of the 'unlocked' pool APIs are very misleading and
not what was intended. This patch replaces 'rxe_xxx_nl' with
'rxe_xxx_locked' with comments indicating that the caller is expected to
hold the rxe pool lock.
Link: https://lore.kernel.org/r/20210125211641.2694-3-rpearson@hpe.com
Reported-by: Hillf Danton <hdanton@sina.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A recent patch which added an 'unlocked' version of rxe_alloc introduced a
bug causing kzalloc(..., GFP_KERNEL) to be called while holding a spin
lock. This patch corrects that error.
rxe_alloc_nl() should always be called while holding the pool->pool_lock
so the 2nd argument to kzalloc there should be GFP_ATOMIC.
rxe_alloc() prior to the change only locked the code around checking that
pool->state is RXE_POOL_STATE_VALID to avoid races between working threads
and a thread shutting down the rxe driver. This patch reverts rxe_alloc()
to this behavior so the lock is not held when kzalloc() is called.
Link: https://lore.kernel.org/r/20210125211641.2694-2-rpearson@hpe.com
Reported-by: syzbot+ec2fd72374785d0e558e@syzkaller.appspotmail.com
Fixes: 3853c35e24 ("RDMA/rxe: Add unlocked versions of pool APIs")
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, polling a umad device will always works, even if the device was
disassociated. A disassociated device should immediately return EPOLLERR
from poll(). Otherwise userspace is endlessly hung on poll() with no idea
that the device has been removed from the system.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20210125121339.837518-3-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
MAD message received by the user has EINVAL error in all flows
including when the device is disassociated. That makes it impossible
for the applications to treat such flow differently.
Change it to return EIO, so the applications will be able to perform
disassociation recovery.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20210125121339.837518-2-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The cited commit disallowed creating any QP which isn't raw ethernet, reg
umr or the special UD qp for testing WC, this proved too strict.
While modify can't be done (no GIDS/GID table for example) just creating a
QP is okay.
This patch partially reverts the bellow mentioned commit and places the
restriction at the modify QP stage and not at the creation. DEVX commands
should be used to manipulate such QPs.
Fixes: 42caf9cb59 ("RDMA/mlx5: Allow only raw Ethernet QPs when RoCE isn't enabled")
Link: https://lore.kernel.org/r/20210125120709.836718-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When creating or re-registering an MR, storing the PDN, access flag and
IOVA information ASAP can simplify the number of parameters passed into
the subsequent process.
Link: https://lore.kernel.org/r/1611395282-991-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split the hns_roce_mtr_create() into serval small functions, remove unused
member in 'struct hns_roce_buf_attr' and delete unnecessary MTR page count
check flow to make the MTR creation related codes clearer.
Link: https://lore.kernel.org/r/1611395282-991-2-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/qp.c:165: warning: Function parameter or member 'rdi' not described in 'rvt_wss_init'
drivers/infiniband/sw/rdmavt/qp.c:329: warning: Function parameter or member 'rdi' not described in 'init_qpn_table'
drivers/infiniband/sw/rdmavt/qp.c:534: warning: Function parameter or member 'type' not described in 'alloc_qpn'
drivers/infiniband/sw/rdmavt/qp.c:664: warning: Function parameter or member 'wqe' not described in 'rvt_swqe_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:664: warning: Function parameter or member 'lkey' not described in 'rvt_swqe_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:682: warning: Function parameter or member 'qp' not described in 'rvt_qp_sends_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:682: warning: Function parameter or member 'lkey' not described in 'rvt_qp_sends_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:706: warning: Function parameter or member 'qp' not described in 'rvt_qp_acks_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:706: warning: Function parameter or member 'lkey' not described in 'rvt_qp_acks_has_lkey'
drivers/infiniband/sw/rdmavt/qp.c:866: warning: Function parameter or member 'rdi' not described in 'rvt_init_qp'
drivers/infiniband/sw/rdmavt/qp.c:920: warning: Function parameter or member 'rdi' not described in '_rvt_reset_qp'
drivers/infiniband/sw/rdmavt/qp.c:1736: warning: Function parameter or member 'udata' not described in 'rvt_destroy_qp'
drivers/infiniband/sw/rdmavt/qp.c:1924: warning: Function parameter or member 'qp' not described in 'rvt_qp_valid_operation'
drivers/infiniband/sw/rdmavt/qp.c:1924: warning: Function parameter or member 'post_parms' not described in 'rvt_qp_valid_operation'
drivers/infiniband/sw/rdmavt/qp.c:1924: warning: Function parameter or member 'wr' not described in 'rvt_qp_valid_operation'
drivers/infiniband/sw/rdmavt/qp.c:2020: warning: Function parameter or member 'call_send' not described in 'rvt_post_one_wr'
drivers/infiniband/sw/rdmavt/qp.c:2621: warning: Function parameter or member 'qp' not described in 'rvt_stop_rnr_timer'
Link: https://lore.kernel.org/r/20210121094519.2044049-31-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_iba6120.c:1229: warning: Function parameter or member 'ppd' not described in 'qib_6120_bringup_serdes'
drivers/infiniband/hw/qib/qib_iba6120.c:1229: warning: Excess function parameter 'dd' description in 'qib_6120_bringup_serdes'
drivers/infiniband/hw/qib/qib_iba6120.c:1436: warning: Function parameter or member 'ppd' not described in 'qib_6120_setup_setextled'
drivers/infiniband/hw/qib/qib_iba6120.c:1436: warning: Excess function parameter 'dd' description in 'qib_6120_setup_setextled'
drivers/infiniband/hw/qib/qib_iba6120.c:1836: warning: Function parameter or member 'type' not described in 'qib_6120_put_tid'
drivers/infiniband/hw/qib/qib_iba6120.c:1836: warning: Excess function parameter 'tidtype' description in 'qib_6120_put_tid'
drivers/infiniband/hw/qib/qib_iba6120.c:1903: warning: Function parameter or member 'type' not described in 'qib_6120_put_tid_2'
drivers/infiniband/hw/qib/qib_iba6120.c:1903: warning: Excess function parameter 'tidtype' description in 'qib_6120_put_tid_2'
drivers/infiniband/hw/qib/qib_iba6120.c:1944: warning: Function parameter or member 'rcd' not described in 'qib_6120_clear_tids'
drivers/infiniband/hw/qib/qib_iba6120.c:1944: warning: Excess function parameter 'ctxt' description in 'qib_6120_clear_tids'
drivers/infiniband/hw/qib/qib_iba6120.c:2018: warning: Function parameter or member 'kinfo' not described in 'qib_6120_get_base_info'
drivers/infiniband/hw/qib/qib_iba6120.c:2018: warning: Excess function parameter 'kbase' description in 'qib_6120_get_base_info'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Function parameter or member 'ppd' not described in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Function parameter or member 'reg' not described in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Excess function parameter 'dd' description in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2277: warning: Excess function parameter 'creg' description in 'qib_portcntr_6120'
drivers/infiniband/hw/qib/qib_iba6120.c:2620: warning: Function parameter or member 't' not described in 'qib_get_6120_faststats'
Link: https://lore.kernel.org/r/20210121094519.2044049-30-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_verbs.c:1077: warning: Function parameter or member 'ppd' not described in 'qib_get_counters'
drivers/infiniband/hw/qib/qib_verbs.c:1077: warning: Excess function parameter 'dd' description in 'qib_get_counters'
drivers/infiniband/hw/qib/qib_verbs.c:1686: warning: Function parameter or member 'qp' not described in '_qib_schedule_send'
drivers/infiniband/hw/qib/qib_verbs.c:1703: warning: Function parameter or member 'qp' not described in 'qib_schedule_send'
Link: https://lore.kernel.org/r/20210121094519.2044049-29-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_iba7322.c:2521: warning: Function parameter or member 'ppd' not described in 'qib_7322_mini_quiet_serdes'
drivers/infiniband/hw/qib/qib_iba7322.c:2521: warning: Excess function parameter 'dd' description in 'qib_7322_mini_quiet_serdes'
drivers/infiniband/hw/qib/qib_iba7322.c:3768: warning: Function parameter or member 'type' not described in 'qib_7322_put_tid'
drivers/infiniband/hw/qib/qib_iba7322.c:3768: warning: Excess function parameter 'tidtype' description in 'qib_7322_put_tid'
drivers/infiniband/hw/qib/qib_iba7322.c:3806: warning: Function parameter or member 'rcd' not described in 'qib_7322_clear_tids'
drivers/infiniband/hw/qib/qib_iba7322.c:3806: warning: Excess function parameter 'ctxt' description in 'qib_7322_clear_tids'
drivers/infiniband/hw/qib/qib_iba7322.c:3872: warning: Function parameter or member 'kinfo' not described in 'qib_7322_get_base_info'
drivers/infiniband/hw/qib/qib_iba7322.c:3872: warning: Excess function parameter 'kbase' description in 'qib_7322_get_base_info'
drivers/infiniband/hw/qib/qib_iba7322.c:4730: warning: Function parameter or member 'reg' not described in 'qib_portcntr_7322'
drivers/infiniband/hw/qib/qib_iba7322.c:4730: warning: Excess function parameter 'creg' description in 'qib_portcntr_7322'
drivers/infiniband/hw/qib/qib_iba7322.c:5109: warning: Function parameter or member 't' not described in 'qib_get_7322_faststats'
drivers/infiniband/hw/qib/qib_iba7322.c:7189: warning: Function parameter or member 'pdev' not described in 'qib_init_iba7322_funcs'
drivers/infiniband/hw/qib/qib_iba7322.c:7189: warning: Excess function parameter 'dev' description in 'qib_init_iba7322_funcs'
Link: https://lore.kernel.org/r/20210121094519.2044049-28-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mr.c:380: warning: Function parameter or member 'virt_addr' not described in 'rvt_reg_user_mr'
drivers/infiniband/sw/rdmavt/mr.c:449: warning: Function parameter or member 'qp' not described in 'rvt_dereg_clean_qp_cb'
drivers/infiniband/sw/rdmavt/mr.c:449: warning: Function parameter or member 'v' not described in 'rvt_dereg_clean_qp_cb'
drivers/infiniband/sw/rdmavt/mr.c:466: warning: Function parameter or member 'mr' not described in 'rvt_dereg_clean_qps'
drivers/infiniband/sw/rdmavt/mr.c:484: warning: Function parameter or member 'mr' not described in 'rvt_check_refs'
drivers/infiniband/sw/rdmavt/mr.c:484: warning: Function parameter or member 't' not described in 'rvt_check_refs'
drivers/infiniband/sw/rdmavt/mr.c:513: warning: Function parameter or member 'mr' not described in 'rvt_mr_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:513: warning: Function parameter or member 'lkey' not described in 'rvt_mr_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:526: warning: Function parameter or member 'ss' not described in 'rvt_ss_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:526: warning: Function parameter or member 'lkey' not described in 'rvt_ss_has_lkey'
drivers/infiniband/sw/rdmavt/mr.c:551: warning: Function parameter or member 'udata' not described in 'rvt_dereg_mr'
Link: https://lore.kernel.org/r/20210121094519.2044049-27-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/file_ops.c:1533: warning: Function parameter or member 'arg' not described in 'manage_rcvq'
drivers/infiniband/hw/hfi1/file_ops.c:1533: warning: Excess function parameter 'start_stop' description in 'manage_rcvq'
Link: https://lore.kernel.org/r/20210121094519.2044049-26-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_iba7220.c:1726: warning: Function parameter or member 'ppd' not described in 'qib_setup_7220_setextled'
drivers/infiniband/hw/qib/qib_iba7220.c:1726: warning: Excess function parameter 'dd' description in 'qib_setup_7220_setextled'
drivers/infiniband/hw/qib/qib_iba7220.c:2154: warning: Function parameter or member 'type' not described in 'qib_7220_put_tid'
drivers/infiniband/hw/qib/qib_iba7220.c:2154: warning: Excess function parameter 'tidtype' description in 'qib_7220_put_tid'
drivers/infiniband/hw/qib/qib_iba7220.c:2192: warning: Function parameter or member 'rcd' not described in 'qib_7220_clear_tids'
drivers/infiniband/hw/qib/qib_iba7220.c:2192: warning: Excess function parameter 'ctxt' description in 'qib_7220_clear_tids'
drivers/infiniband/hw/qib/qib_iba7220.c:2248: warning: Function parameter or member 'kinfo' not described in 'qib_7220_get_base_info'
drivers/infiniband/hw/qib/qib_iba7220.c:2248: warning: Excess function parameter 'kbase' description in 'qib_7220_get_base_info'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Function parameter or member 'ppd' not described in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Function parameter or member 'reg' not described in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Excess function parameter 'dd' description in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:2903: warning: Excess function parameter 'creg' description in 'qib_portcntr_7220'
drivers/infiniband/hw/qib/qib_iba7220.c:3242: warning: Function parameter or member 't' not described in 'qib_get_7220_faststats'
drivers/infiniband/hw/qib/qib_iba7220.c:4479: warning: Function parameter or member 'pdev' not described in 'qib_init_iba7220_funcs'
drivers/infiniband/hw/qib/qib_iba7220.c:4479: warning: Excess function parameter 'dev' description in 'qib_init_iba7220_funcs'
Link: https://lore.kernel.org/r/20210121094519.2044049-25-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/exp_rcv.c:56: warning: Function parameter or member 'set' not described in 'hfi1_exp_tid_set_init'
drivers/infiniband/hw/hfi1/exp_rcv.c:66: warning: Function parameter or member 'rcd' not described in 'hfi1_exp_tid_group_init'
drivers/infiniband/hw/hfi1/exp_rcv.c:77: warning: Function parameter or member 'rcd' not described in 'hfi1_alloc_ctxt_rcv_groups'
drivers/infiniband/hw/hfi1/exp_rcv.c:114: warning: Function parameter or member 'rcd' not described in 'hfi1_free_ctxt_rcv_groups'
Link: https://lore.kernel.org/r/20210121094519.2044049-24-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mcast.c:195: warning: Function parameter or member 'rdi' not described in 'rvt_mcast_add'
drivers/infiniband/sw/rdmavt/mcast.c:195: warning: Function parameter or member 'ibp' not described in 'rvt_mcast_add'
Link: https://lore.kernel.org/r/20210121094519.2044049-23-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_user_pages.c:60: warning: Function parameter or member 'hwdev' not described in 'qib_map_page'
drivers/infiniband/hw/qib/qib_user_pages.c:60: warning: Function parameter or member 'page' not described in 'qib_map_page'
drivers/infiniband/hw/qib/qib_user_pages.c:60: warning: Function parameter or member 'daddr' not described in 'qib_map_page'
Link: https://lore.kernel.org/r/20210121094519.2044049-22-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'in' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'in_mad_size' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'out' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'out_mad_size' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Function parameter or member 'out_mad_pkey_index' not described in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Excess function parameter 'in_mad' description in 'rvt_process_mad'
drivers/infiniband/sw/rdmavt/mad.c:75: warning: Excess function parameter 'out_mad' description in 'rvt_process_mad'
Link: https://lore.kernel.org/r/20210121094519.2044049-21-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_ud.c:231: warning: Function parameter or member 'flags' not described in 'qib_make_ud_req'
Link: https://lore.kernel.org/r/20210121094519.2044049-20-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_uc.c:49: warning: Function parameter or member 'flags' not described in 'qib_make_uc_req'
Link: https://lore.kernel.org/r/20210121094519.2044049-19-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_tx.c:383: warning: Function parameter or member 'rcd' not described in 'qib_chg_pioavailkernel'
Link: https://lore.kernel.org/r/20210121094519.2044049-18-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_twsi.c:175: warning: Function parameter or member 'last' not described in 'rd_byte'
Link: https://lore.kernel.org/r/20210121094519.2044049-17-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/chip.c:1335: warning: Function parameter or member 'dd' not described in 'hfi1_addr_from_offset'
drivers/infiniband/hw/hfi1/chip.c:1335: warning: Function parameter or member 'offset' not described in 'hfi1_addr_from_offset'
drivers/infiniband/hw/hfi1/chip.c:1350: warning: Function parameter or member 'dd' not described in 'read_csr'
drivers/infiniband/hw/hfi1/chip.c:1350: warning: Function parameter or member 'offset' not described in 'read_csr'
drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'dd' not described in 'write_csr'
drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'offset' not described in 'write_csr'
drivers/infiniband/hw/hfi1/chip.c:1363: warning: Function parameter or member 'value' not described in 'write_csr'
drivers/infiniband/hw/hfi1/chip.c:1385: warning: Function parameter or member 'dd' not described in 'get_csr_addr'
drivers/infiniband/hw/hfi1/chip.c:1385: warning: Function parameter or member 'offset' not described in 'get_csr_addr'
drivers/infiniband/hw/hfi1/chip.c:8442: warning: Function parameter or member 'rcd' not described in 'receive_interrupt_common'
drivers/infiniband/hw/hfi1/chip.c:8491: warning: Function parameter or member 'napi' not described in 'hfi1_netdev_rx_napi'
drivers/infiniband/hw/hfi1/chip.c:8491: warning: Function parameter or member 'budget' not described in 'hfi1_netdev_rx_napi'
drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'dd' not described in 'init_qpmap_table'
drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'first_ctxt' not described in 'init_qpmap_table'
drivers/infiniband/hw/hfi1/chip.c:14221: warning: Function parameter or member 'last_ctxt' not described in 'init_qpmap_table'
drivers/infiniband/hw/hfi1/chip.c:14399: warning: Function parameter or member 'dd' not described in 'init_qos'
drivers/infiniband/hw/hfi1/chip.c:14399: warning: Function parameter or member 'rmt' not described in 'init_qos'
drivers/infiniband/hw/hfi1/chip.c:15032: warning: Function parameter or member 'dd' not described in 'hfi1_init_dd'
drivers/infiniband/hw/hfi1/chip.c:15032: warning: Excess function parameter 'dev' description in 'hfi1_init_dd'
drivers/infiniband/hw/hfi1/chip.c:15032: warning: Excess function parameter 'ent' description in 'hfi1_init_dd'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'ppd' not described in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'srate_mbs' not described in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Function parameter or member 'dw_len' not described in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Excess function parameter 'srate' description in 'create_pbc'
drivers/infiniband/hw/hfi1/chip.c:15395: warning: Excess function parameter 'dwlen' description in 'create_pbc'
Link: https://lore.kernel.org/r/20210121094519.2044049-16-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_rc.c:216: warning: Function parameter or member 'flags' not described in 'qib_make_rc_req'
drivers/infiniband/hw/qib/qib_rc.c:1008: warning: Function parameter or member 'aeth' not described in 'do_rc_ack'
drivers/infiniband/hw/qib/qib_rc.c:1008: warning: Function parameter or member 'val' not described in 'do_rc_ack'
drivers/infiniband/hw/qib/qib_rc.c:1008: warning: Function parameter or member 'rcd' not described in 'do_rc_ack'
drivers/infiniband/hw/qib/qib_rc.c:1274: warning: Function parameter or member 'rcd' not described in 'qib_rc_rcv_resp'
drivers/infiniband/hw/qib/qib_rc.c:1497: warning: Function parameter or member 'rcd' not described in 'qib_rc_rcv_error'
Link: https://lore.kernel.org/r/20210121094519.2044049-15-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/cq.c:381: warning: Function parameter or member 'cqe' not described in 'rvt_resize_cq'
drivers/infiniband/sw/rdmavt/cq.c:381: warning: Function parameter or member 'udata' not described in 'rvt_resize_cq'
Link: https://lore.kernel.org/r/20210121094519.2044049-14-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_qp.c:214: warning: Function parameter or member 'rdi' not described in 'qib_free_all_qps'
drivers/infiniband/hw/qib/qib_qp.c:387: warning: Function parameter or member 'qp' not described in 'qib_check_send_wqe'
drivers/infiniband/hw/qib/qib_qp.c:387: warning: Function parameter or member 'wqe' not described in 'qib_check_send_wqe'
drivers/infiniband/hw/qib/qib_qp.c:387: warning: Function parameter or member 'call_send' not described in 'qib_check_send_wqe'
drivers/infiniband/hw/qib/qib_qp.c:425: warning: Function parameter or member 's' not described in 'qib_qp_iter_print'
drivers/infiniband/hw/qib/qib_qp.c:425: warning: Function parameter or member 'iter' not described in 'qib_qp_iter_print'
Link: https://lore.kernel.org/r/20210121094519.2044049-13-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_pcie.c:190: warning: Function parameter or member 'dd' not described in 'qib_cache_msi_info'
drivers/infiniband/hw/qib/qib_pcie.c:190: warning: Function parameter or member 'pos' not described in 'qib_cache_msi_info'
Link: https://lore.kernel.org/r/20210121094519.2044049-12-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_intr.c:48: warning: Function parameter or member 'msg' not described in 'qib_format_hwmsg'
drivers/infiniband/hw/qib/qib_intr.c:48: warning: Function parameter or member 'msgl' not described in 'qib_format_hwmsg'
drivers/infiniband/hw/qib/qib_intr.c:48: warning: Function parameter or member 'hwmsg' not described in 'qib_format_hwmsg'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'hwerrs' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'hwerrmsgs' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'nhwerrmsgs' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'msg' not described in 'qib_format_hwerrors'
drivers/infiniband/hw/qib/qib_intr.c:64: warning: Function parameter or member 'msgl' not described in 'qib_format_hwerrors'
Link: https://lore.kernel.org/r/20210121094519.2044049-11-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_mad.c:896: warning: Function parameter or member 'ppd' not described in 'rm_pkey'
drivers/infiniband/hw/qib/qib_mad.c:896: warning: Excess function parameter 'dd' description in 'rm_pkey'
drivers/infiniband/hw/qib/qib_mad.c:926: warning: Function parameter or member 'ppd' not described in 'add_pkey'
drivers/infiniband/hw/qib/qib_mad.c:926: warning: Excess function parameter 'dd' description in 'add_pkey'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'in' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'out' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'out_mad_size' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Function parameter or member 'out_mad_pkey_index' not described in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Excess function parameter 'in_mad' description in 'qib_process_mad'
drivers/infiniband/hw/qib/qib_mad.c:2365: warning: Excess function parameter 'out_mad' description in 'qib_process_mad'
Link: https://lore.kernel.org/r/20210121094519.2044049-10-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_eeprom.c:55: warning: Function parameter or member 'buff' not described in 'qib_eeprom_read'
drivers/infiniband/hw/qib/qib_eeprom.c:55: warning: Excess function parameter 'buffer' description in 'qib_eeprom_read'
drivers/infiniband/hw/qib/qib_eeprom.c:102: warning: Function parameter or member 'buff' not described in 'qib_eeprom_write'
drivers/infiniband/hw/qib/qib_eeprom.c:102: warning: Excess function parameter 'buffer' description in 'qib_eeprom_write'
Link: https://lore.kernel.org/r/20210121094519.2044049-9-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/sw/rdmavt/vt.c:300: warning: Function parameter or member 'context' not described in 'rvt_dealloc_ucontext'
Link: https://lore.kernel.org/r/20210121094519.2044049-8-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/qib/qib_driver.c:165: warning: Function parameter or member 'ppd' not described in 'qib_wait_linkstate'
drivers/infiniband/hw/qib/qib_driver.c:165: warning: Excess function parameter 'dd' description in 'qib_wait_linkstate'
Link: https://lore.kernel.org/r/20210121094519.2044049-7-lee.jones@linaro.org
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Intel <ibsupport@intel.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hns/hns_roce_mr.c:1003: warning: Function parameter or member 'hr_dev' not described in 'hns_roce_mtr_create'
Link: https://lore.kernel.org/r/20210121094519.2044049-6-lee.jones@linaro.org
Cc: Lijun Ou <oulijun@huawei.com>
Cc: Weihang Li <liweihang@huawei.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1398: warning: Function parameter or member 'dereset' not described in 'hns_roce_v1_reset'
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1398: warning: Excess function parameter 'enable' description in 'hns_roce_v1_reset'
Link: https://lore.kernel.org/r/20210121094519.2044049-5-lee.jones@linaro.org
Cc: Lijun Ou <oulijun@huawei.com>
Cc: Weihang Li <liweihang@huawei.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Wei Hu <xavier.huwei@huawei.com>
Cc: Nenglong Zhao <zhaonenglong@hisilicon.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/efa/efa_com.c:801: warning: Excess function parameter 'note' description in 'efa_com_admin_q_comp_intr_handler'
Link: https://lore.kernel.org/r/20210121094519.2044049-4-lee.jones@linaro.org
Cc: Gal Pressman <galpress@amazon.com>
Cc: Yossi Leybovich <sleybo@amazon.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/mlx5/qp.c:5384: warning: Function parameter or member 'qp' not described in 'mlx5_ib_qp_set_counter'
drivers/infiniband/hw/mlx5/qp.c:5384: warning: Function parameter or member 'counter' not described in 'mlx5_ib_qp_set_counter'
Link: https://lore.kernel.org/r/20210121094519.2044049-3-lee.jones@linaro.org
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'dev' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'pfault' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'wqe' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'wqe_end' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'bytes_mapped' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'total_wqe_bytes' not described in 'pagefault_data_segments'
drivers/infiniband/hw/mlx5/odp.c:1062: warning: Function parameter or member 'receive_queue' not described in 'pagefault_data_segments'
Link: https://lore.kernel.org/r/20210121094519.2044049-2-lee.jones@linaro.org
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An INI QP doesn't require receive CQ, the creation flow sets the recv counts
to zero:
if (cmd->qp_type == IB_QPT_XRC_INI) {
cmd->max_recv_wr = 0;
cmd->max_recv_sge = 0;
The new IOCTL path also does not set the rcq, so make things the same.
Link: https://lore.kernel.org/r/20201216071755.149449-1-yangx.jy@cn.fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement the new driver method 'reg_user_mr_dmabuf'. Utilize the core
functions to import dma-buf based memory region and update the mappings.
Add code to handle dma-buf related page fault.
Link: https://lore.kernel.org/r/1608067636-98073-5-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement a new uverbs ioctl method for memory registration with file
descriptor as an extra parameter.
Link: https://lore.kernel.org/r/1608067636-98073-4-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Dma-buf based memory region requires one extra parameter and is processed
quite differently. Adding a separate method allows clean separation from
regular memory regions.
Link: https://lore.kernel.org/r/1608067636-98073-3-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Dma-buf is a standard cross-driver buffer sharing mechanism that can be
used to support peer-to-peer access from RDMA devices.
Device memory exported via dma-buf is associated with a file descriptor.
This is passed to the user space as a property associated with the buffer
allocation. When the buffer is registered as a memory region, the file
descriptor is passed to the RDMA driver along with other parameters.
Implement the common code for importing dma-buf object and mapping dma-buf
pages.
Link: https://lore.kernel.org/r/1608067636-98073-2-git-send-email-jianxin.xiong@intel.com
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Acked-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian Koenig <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This reverts commit b2d2440430.
It's true that creating rxe on top of 802.1q interfaces doesn't work.
Thus, commit fd49ddaf7e ("RDMA/rxe: prevent rxe creation on top of vlan
interface") was absolutely correct.
But b2d2440430 was incorrect assuming that with this change, RDMA and
VLAN don't work togehter at all. It just has to be set up
differently. Rather than creating rxe on top of the VLAN interface, rxe
must be created on top of the physical interface. RDMA then works just
fine through VLAN interfaces on top of that physical interface, via the
"upper device" logic.
This is hard to see in the rxe logic because it never talks about vlan,
but instead rxe carefully selects upper vlan netdevices when working with
packets which in turn imply certain vlan tagging. This is all done
correctly and interacts with the gid table with VLAN support the same as
real HW does.
b2d2440430 broke this setup deliberately and should thus be
reverted. Also, b2d2440430 removed rxe_dma_device(), so adapt the revert
to discard that hunk.
Fixes: b2d2440430 ("RDMA/rxe: Remove VLAN code leftovers from RXE")
Link: https://lore.kernel.org/r/20210120161913.7347-1-mwilck@suse.com
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/iwpm_msg.c:402: warning: Function parameter or member 'skb' not described in 'iwpm_register_pid_cb'
drivers/infiniband/core/iwpm_msg.c:475: warning: Function parameter or member 'skb' not described in 'iwpm_add_mapping_cb'
drivers/infiniband/core/iwpm_msg.c:553: warning: Function parameter or member 'skb' not described in 'iwpm_add_and_query_mapping_cb'
drivers/infiniband/core/iwpm_msg.c:636: warning: Function parameter or member 'skb' not described in 'iwpm_remote_info_cb'
drivers/infiniband/core/iwpm_msg.c:716: warning: Function parameter or member 'skb' not described in 'iwpm_mapping_info_cb'
drivers/infiniband/core/iwpm_msg.c:773: warning: Function parameter or member 'skb' not described in 'iwpm_ack_mapping_info_cb'
drivers/infiniband/core/iwpm_msg.c:803: warning: Function parameter or member 'skb' not described in 'iwpm_mapping_error_cb'
drivers/infiniband/core/iwpm_msg.c:851: warning: Function parameter or member 'skb' not described in 'iwpm_hello_cb'
Link: https://lore.kernel.org/r/20210118223929.512175-21-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/iwpm_util.c:138: warning: Function parameter or member 'local_sockaddr' not described in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:138: warning: Function parameter or member 'mapped_sockaddr' not described in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:138: warning: Excess function parameter 'local_addr' description in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:138: warning: Excess function parameter 'mapped_addr' description in 'iwpm_create_mapinfo'
drivers/infiniband/core/iwpm_util.c:185: warning: Function parameter or member 'local_sockaddr' not described in 'iwpm_remove_mapinfo'
drivers/infiniband/core/iwpm_util.c:185: warning: Excess function parameter 'local_addr' description in 'iwpm_remove_mapinfo'
Link: https://lore.kernel.org/r/20210118223929.512175-20-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'dev' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'port' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'on' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:36: warning: Function parameter or member 'mask' not described in 'rdma_counter_set_auto_mode'
drivers/infiniband/core/counters.c:238: warning: Function parameter or member 'qp' not described in 'rdma_get_counter_auto_mode'
drivers/infiniband/core/counters.c:238: warning: Function parameter or member 'port' not described in 'rdma_get_counter_auto_mode'
drivers/infiniband/core/counters.c:282: warning: Function parameter or member 'qp' not described in 'rdma_counter_bind_qp_auto'
drivers/infiniband/core/counters.c:282: warning: Function parameter or member 'port' not described in 'rdma_counter_bind_qp_auto'
drivers/infiniband/core/counters.c:320: warning: Function parameter or member 'qp' not described in 'rdma_counter_unbind_qp'
drivers/infiniband/core/counters.c:388: warning: Function parameter or member 'dev' not described in 'rdma_counter_get_hwstat_value'
drivers/infiniband/core/counters.c:388: warning: Function parameter or member 'port' not described in 'rdma_counter_get_hwstat_value'
drivers/infiniband/core/counters.c:388: warning: Function parameter or member 'index' not described in 'rdma_counter_get_hwstat_value'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'dev' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'port' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'qp_num' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:444: warning: Function parameter or member 'counter_id' not described in 'rdma_counter_bind_qpn'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'dev' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'port' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'qp_num' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:494: warning: Function parameter or member 'counter_id' not described in 'rdma_counter_bind_qpn_alloc'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'dev' not described in 'rdma_counter_unbind_qpn'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'port' not described in 'rdma_counter_unbind_qpn'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'qp_num' not described in 'rdma_counter_unbind_qpn'
drivers/infiniband/core/counters.c:541: warning: Function parameter or member 'counter_id' not described in 'rdma_counter_unbind_qpn'
Link: https://lore.kernel.org/r/20210118223929.512175-19-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_verbs.c:273: warning: Excess function parameter 'iwdev' description in 'i40iw_free_qp_resources'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:273: warning: Excess function parameter 'qp_num' description in 'i40iw_free_qp_resources'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:307: warning: Function parameter or member 'udata' not described in 'i40iw_destroy_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Function parameter or member 'iwdev' not described in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Function parameter or member 'iwqp' not described in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Excess function parameter 'dev' description in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:348: warning: Excess function parameter 'qp' description in 'i40iw_setup_virt_qp'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1248: warning: Function parameter or member 'pg_size' not described in 'i40iw_check_mem_contiguous'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1264: warning: Function parameter or member 'pg_size' not described in 'i40iw_check_mr_contiguous'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1539: warning: Function parameter or member 'sg_offset' not described in 'i40iw_map_mr_sg'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1886: warning: Function parameter or member 'udata' not described in 'i40iw_dereg_mr'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'dev' not described in 'hw_rev_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'attr' not described in 'hw_rev_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1953: warning: Function parameter or member 'buf' not described in 'hw_rev_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'dev' not described in 'hca_type_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'attr' not described in 'hca_type_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1967: warning: Function parameter or member 'buf' not described in 'hca_type_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'dev' not described in 'board_id_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'attr' not described in 'board_id_show'
drivers/infiniband/hw/i40iw/i40iw_verbs.c:1977: warning: Function parameter or member 'buf' not described in 'board_id_show'
Link: https://lore.kernel.org/r/20210118223929.512175-18-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/restrack.c:209: warning: Function parameter or member 'res' not described in 'rdma_restrack_new'
drivers/infiniband/core/restrack.c:209: warning: Function parameter or member 'type' not described in 'rdma_restrack_new'
Link: https://lore.kernel.org/r/20210118223929.512175-17-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_utils.c:66: warning: Function parameter or member 'ipv4' not described in 'i40iw_arp_table'
drivers/infiniband/hw/i40iw/i40iw_utils.c:148: warning: Function parameter or member 'notifier' not described in 'i40iw_inetaddr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:148: warning: Excess function parameter 'notfier' description in 'i40iw_inetaddr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:224: warning: Function parameter or member 'notifier' not described in 'i40iw_inet6addr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:224: warning: Excess function parameter 'notfier' description in 'i40iw_inet6addr_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:273: warning: Function parameter or member 'notifier' not described in 'i40iw_net_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:273: warning: Excess function parameter 'notfier' description in 'i40iw_net_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:320: warning: Function parameter or member 'notifier' not described in 'i40iw_netdevice_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:320: warning: Excess function parameter 'notfier' description in 'i40iw_netdevice_event'
drivers/infiniband/hw/i40iw/i40iw_utils.c:663: warning: Function parameter or member 'desc' not described in 'i40iw_debug_buf'
drivers/infiniband/hw/i40iw/i40iw_utils.c:792: warning: Function parameter or member 'sdinfo' not described in 'i40iw_cqp_sds_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:792: warning: Excess function parameter 'sd_info' description in 'i40iw_cqp_sds_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:895: warning: Function parameter or member 't' not described in 'i40iw_terminate_timeout'
drivers/infiniband/hw/i40iw/i40iw_utils.c:895: warning: Excess function parameter 'context' description in 'i40iw_terminate_timeout'
drivers/infiniband/hw/i40iw/i40iw_utils.c:953: warning: Function parameter or member 'dev' not described in 'i40iw_cqp_spawn_worker'
drivers/infiniband/hw/i40iw/i40iw_utils.c:953: warning: Excess function parameter 'iwdev' description in 'i40iw_cqp_spawn_worker'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1058: warning: Function parameter or member 'dev' not described in 'i40iw_cqp_query_fpm_values_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1058: warning: Excess function parameter 'iwdev' description in 'i40iw_cqp_query_fpm_values_cmd'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1120: warning: Function parameter or member 'dev' not described in 'i40iw_vf_wait_vchnl_resp'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1120: warning: Excess function parameter 'iwdev' description in 'i40iw_vf_wait_vchnl_resp'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1467: warning: Function parameter or member 't' not described in 'i40iw_hw_stats_timeout'
drivers/infiniband/hw/i40iw/i40iw_utils.c:1467: warning: Excess function parameter 'vsi' description in 'i40iw_hw_stats_timeout'
Link: https://lore.kernel.org/r/20210118223929.512175-16-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:132: warning: Function parameter or member 'rsrc_type' not described in 'vchnl_vf_send_add_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:132: warning: Function parameter or member 'start_index' not described in 'vchnl_vf_send_add_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:132: warning: Function parameter or member 'rsrc_count' not described in 'vchnl_vf_send_add_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:170: warning: Function parameter or member 'rsrc_type' not described in 'vchnl_vf_send_del_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:170: warning: Function parameter or member 'start_index' not described in 'vchnl_vf_send_del_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:170: warning: Function parameter or member 'rsrc_count' not described in 'vchnl_vf_send_del_hmc_objs_req'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:230: warning: Function parameter or member 'hmc_fcn' not described in 'vchnl_pf_send_get_hmc_fcn_resp'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:283: warning: Function parameter or member 'op_ret_code' not described in 'vchnl_pf_send_error_resp'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Function parameter or member 'dev' not described in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Function parameter or member 'callback_param' not described in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Function parameter or member 'cqe_info' not described in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Excess function parameter 'cqp_req_param' description in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:305: warning: Excess function parameter 'not_used' description in 'pf_cqp_get_hmc_fcn_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:337: warning: Function parameter or member 'work_vf_dev' not described in 'pf_add_hmc_obj_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:337: warning: Excess function parameter 'vf_dev' description in 'pf_add_hmc_obj_callback'
drivers/infiniband/hw/i40iw/i40iw_virtchnl.c:412: warning: Function parameter or member 'dev' not described in 'i40iw_vf_init_pestat'
Link: https://lore.kernel.org/r/20210118223929.512175-15-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_uk.c:129: warning: Function parameter or member 'total_size' not described in 'i40iw_qp_get_next_send_wqe'
drivers/infiniband/hw/i40iw/i40iw_uk.c:129: warning: Function parameter or member 'wr_id' not described in 'i40iw_qp_get_next_send_wqe'
drivers/infiniband/hw/i40iw/i40iw_uk.c:724: warning: Excess function parameter 'post_cq' description in 'i40iw_cq_poll_completion'
drivers/infiniband/hw/i40iw/i40iw_uk.c:1058: warning: Function parameter or member 'queue' not described in 'i40iw_clean_cq'
Link: https://lore.kernel.org/r/20210118223929.512175-14-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'client' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'sa_dev' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'device' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'port_num' not described in 'opa_pr_query_possible'
drivers/infiniband/core/sa_query.c:1449: warning: Function parameter or member 'rec' not described in 'opa_pr_query_possible'
Link: https://lore.kernel.org/r/20210118223929.512175-13-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/multicast.c:739: warning: Function parameter or member 'rec' not described in 'ib_init_ah_from_mcmember'
Link: https://lore.kernel.org/r/20210118223929.512175-12-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_puda.c:517: warning: Function parameter or member 'dev' not described in 'i40iw_puda_qp_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:517: warning: Function parameter or member 'qp' not described in 'i40iw_puda_qp_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:517: warning: Excess function parameter 'rsrc' description in 'i40iw_puda_qp_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:629: warning: Function parameter or member 'dev' not described in 'i40iw_puda_cq_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:629: warning: Function parameter or member 'cq' not described in 'i40iw_puda_cq_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:629: warning: Excess function parameter 'rsrc' description in 'i40iw_puda_cq_wqe'
drivers/infiniband/hw/i40iw/i40iw_puda.c:792: warning: Function parameter or member 'vsi' not described in 'i40iw_puda_dele_resources'
drivers/infiniband/hw/i40iw/i40iw_puda.c:792: warning: Excess function parameter 'dev' description in 'i40iw_puda_dele_resources'
drivers/infiniband/hw/i40iw/i40iw_puda.c:884: warning: Function parameter or member 'vsi' not described in 'i40iw_puda_create_rsrc'
drivers/infiniband/hw/i40iw/i40iw_puda.c:884: warning: Excess function parameter 'dev' description in 'i40iw_puda_create_rsrc'
drivers/infiniband/hw/i40iw/i40iw_puda.c:1135: warning: Function parameter or member 'pfpdu' not described in 'i40iw_ieq_create_pbufl'
drivers/infiniband/hw/i40iw/i40iw_puda.c:1442: warning: Function parameter or member 'vsi' not described in 'i40iw_ieq_receive'
drivers/infiniband/hw/i40iw/i40iw_puda.c:1442: warning: Excess function parameter 'dev' description in 'i40iw_ieq_receive'
Link: https://lore.kernel.org/r/20210118223929.512175-11-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_pble.c:60: warning: Function parameter or member 'dev' not described in 'i40iw_destroy_pble_pool'
drivers/infiniband/hw/i40iw/i40iw_pble.c:120: warning: Function parameter or member 'pble_rsrc' not described in 'get_sd_pd_idx'
drivers/infiniband/hw/i40iw/i40iw_pble.c:120: warning: Function parameter or member 'idx' not described in 'get_sd_pd_idx'
Link: https://lore.kernel.org/r/20210118223929.512175-10-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/roce_gid_mgmt.c:511: warning: Function parameter or member 'ib_dev' not described in 'rdma_roce_rescan_device'
drivers/infiniband/core/roce_gid_mgmt.c:511: warning: Excess function parameter 'device' description in 'rdma_roce_rescan_device'
Link: https://lore.kernel.org/r/20210118223929.512175-9-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_main.c:192: warning: Function parameter or member 't' not described in 'i40iw_dpc'
drivers/infiniband/hw/i40iw/i40iw_main.c:192: warning: Excess function parameter 'data' description in 'i40iw_dpc'
drivers/infiniband/hw/i40iw/i40iw_main.c:206: warning: Function parameter or member 't' not described in 'i40iw_ceq_dpc'
drivers/infiniband/hw/i40iw/i40iw_main.c:206: warning: Excess function parameter 'data' description in 'i40iw_ceq_dpc'
drivers/infiniband/hw/i40iw/i40iw_main.c:236: warning: Function parameter or member 'free_hwcqp' not described in 'i40iw_destroy_cqp'
drivers/infiniband/hw/i40iw/i40iw_main.c:236: warning: Excess function parameter 'create_done' description in 'i40iw_destroy_cqp'
drivers/infiniband/hw/i40iw/i40iw_main.c:264: warning: Function parameter or member 'msix_vec' not described in 'i40iw_disable_irq'
drivers/infiniband/hw/i40iw/i40iw_main.c:264: warning: Excess function parameter 'msic_vec' description in 'i40iw_disable_irq'
drivers/infiniband/hw/i40iw/i40iw_main.c:407: warning: Function parameter or member 'dev' not described in 'i40iw_close_hmc_objects_type'
drivers/infiniband/hw/i40iw/i40iw_main.c:407: warning: Function parameter or member 'hmc_info' not described in 'i40iw_close_hmc_objects_type'
drivers/infiniband/hw/i40iw/i40iw_main.c:407: warning: Excess function parameter 'iwdev' description in 'i40iw_close_hmc_objects_type'
drivers/infiniband/hw/i40iw/i40iw_main.c:443: warning: Function parameter or member 'irq' not described in 'i40iw_ceq_handler'
drivers/infiniband/hw/i40iw/i40iw_main.c:1786: warning: Function parameter or member 'reset' not described in 'i40iw_close'
Link: https://lore.kernel.org/r/20210118223929.512175-8-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Intel Corporation <e1000-rdma@lists.sourceforge.net>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_hw.c:172: warning: Function parameter or member 'iwcq' not described in 'i40iw_iwarp_ce_handler'
drivers/infiniband/hw/i40iw/i40iw_hw.c:172: warning: Excess function parameter 'iwcp' description in 'i40iw_iwarp_ce_handler'
drivers/infiniband/hw/i40iw/i40iw_hw.c:529: warning: Function parameter or member 'ipv4' not described in 'i40iw_manage_arp_cache'
drivers/infiniband/hw/i40iw/i40iw_hw.c:592: warning: Excess function parameter 'user_pri' description in 'i40iw_manage_qhash'
Link: https://lore.kernel.org/r/20210118223929.512175-7-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/cache.c:688: warning: Function parameter or member 'ib_dev' not described in 'rdma_find_gid_by_port'
drivers/infiniband/core/cache.c:688: warning: Function parameter or member 'port' not described in 'rdma_find_gid_by_port'
drivers/infiniband/core/cache.c:688: warning: Excess function parameter 'device' description in 'rdma_find_gid_by_port'
drivers/infiniband/core/cache.c:688: warning: Excess function parameter 'port_num' description in 'rdma_find_gid_by_port'
drivers/infiniband/core/cache.c:741: warning: Function parameter or member 'ib_dev' not described in 'rdma_find_gid_by_filter'
drivers/infiniband/core/cache.c:741: warning: Function parameter or member 'context' not described in 'rdma_find_gid_by_filter'
drivers/infiniband/core/cache.c:741: warning: Excess function parameter 'device' description in 'rdma_find_gid_by_filter'
drivers/infiniband/core/cache.c:1263: warning: Excess function parameter 'num_entries' description in 'rdma_query_gid_table'
Link: https://lore.kernel.org/r/20210118223929.512175-6-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_cm.c:76: warning: Function parameter or member 'bufp' not described in 'i40iw_free_sqbuf'
drivers/infiniband/hw/i40iw/i40iw_cm.c:76: warning: Excess function parameter 'buf' description in 'i40iw_free_sqbuf'
drivers/infiniband/hw/i40iw/i40iw_cm.c:737: warning: Function parameter or member 'start_addr' not described in 'i40iw_build_mpa_v1'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1059: warning: Function parameter or member 'cm_node' not described in 'i40iw_schedule_cm_timer'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1211: warning: Function parameter or member 't' not described in 'i40iw_cm_timer_tick'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1211: warning: Excess function parameter 'pass' description in 'i40iw_cm_timer_tick'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1475: warning: Function parameter or member 'vlan_id' not described in 'i40iw_find_listener'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1527: warning: Function parameter or member 'port' not described in 'i40iw_find_port'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1527: warning: Excess function parameter 'accelerated_list' description in 'i40iw_find_port'
drivers/infiniband/hw/i40iw/i40iw_cm.c:1843: warning: Function parameter or member 'listener' not described in 'i40iw_dec_refcnt_listen'
drivers/infiniband/hw/i40iw/i40iw_cm.c:2037: warning: Function parameter or member 'src_addr' not described in 'i40iw_get_dst_ipv6'
drivers/infiniband/hw/i40iw/i40iw_cm.c:2037: warning: Function parameter or member 'dst_addr' not described in 'i40iw_get_dst_ipv6'
drivers/infiniband/hw/i40iw/i40iw_cm.c:2061: warning: Function parameter or member 'src' not described in 'i40iw_addr_resolve_neigh_ipv6'
drivers/infiniband/hw/i40iw/i40iw_cm.c:2061: warning: Function parameter or member 'dest' not described in 'i40iw_addr_resolve_neigh_ipv6'
drivers/infiniband/hw/i40iw/i40iw_cm.c:2061: warning: Excess function parameter 'dst_ip' description in 'i40iw_addr_resolve_neigh_ipv6'
drivers/infiniband/hw/i40iw/i40iw_cm.c:3011: warning: Function parameter or member 'pdata' not described in 'i40iw_cm_reject'
drivers/infiniband/hw/i40iw/i40iw_cm.c:3011: warning: Excess function parameter 'pdate' description in 'i40iw_cm_reject'
drivers/infiniband/hw/i40iw/i40iw_cm.c:4312: warning: Function parameter or member 'nfo' not described in 'i40iw_cm_teardown_connections'
drivers/infiniband/hw/i40iw/i40iw_cm.c:4312: warning: Excess function parameter 'ipv4' description in 'i40iw_cm_teardown_connections'
drivers/infiniband/hw/i40iw/i40iw_cm.c:4367: warning: Function parameter or member 'netdev' not described in 'i40iw_if_notify'
Link: https://lore.kernel.org/r/20210118223929.512175-5-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:193: warning: Function parameter or member 'obj_info' not described in 'i40iw_sc_decode_fpm_query'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:193: warning: Excess function parameter 'info' description in 'i40iw_sc_decode_fpm_query'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:218: warning: Function parameter or member 'hmc_info' not described in 'i40iw_sc_parse_fpm_query_buf'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:218: warning: Excess function parameter 'info' description in 'i40iw_sc_parse_fpm_query_buf'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:784: warning: Function parameter or member 'compl_info' not described in 'i40iw_sc_poll_for_cqp_op_done'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:784: warning: Excess function parameter 'info' description in 'i40iw_sc_poll_for_cqp_op_done'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:947: warning: Function parameter or member 'commit_fpm_mem' not described in 'i40iw_sc_commit_fpm_values'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:1032: warning: Function parameter or member 'dev' not described in 'i40iw_get_rdma_features'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:1468: warning: Function parameter or member 'ignore_ref_count' not described in 'i40iw_sc_del_local_mac_ipaddr_entry'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:2314: warning: Function parameter or member 'scratch' not described in 'i40iw_sc_cq_modify'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:3682: warning: Function parameter or member 'info' not described in 'cqp_sds_wqe_fill'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:4894: warning: Function parameter or member 'stats' not described in 'i40iw_hw_stats_read_32'
drivers/infiniband/hw/i40iw/i40iw_ctrl.c:4894: warning: Excess function parameter 'stat' description in 'i40iw_hw_stats_read_32'
Link: https://lore.kernel.org/r/20210118223929.512175-4-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/core/device.c:1896: warning: Function parameter or member 'ibdev' not described in 'ib_get_client_nl_info'
drivers/infiniband/core/device.c:1896: warning: Function parameter or member 'client_name' not described in 'ib_get_client_nl_info'
drivers/infiniband/core/device.c:1896: warning: Function parameter or member 'res' not described in 'ib_get_client_nl_info'
drivers/infiniband/core/device.c:2328: warning: Function parameter or member 'nldev_cb' not described in 'ib_enum_all_devs'
drivers/infiniband/core/device.c:2328: warning: Function parameter or member 'skb' not described in 'ib_enum_all_devs'
Link: https://lore.kernel.org/r/20210118223929.512175-3-lee.jones@linaro.org
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/i40iw/i40iw_hmc.c:64: warning: Function parameter or member 'idx' not described in 'i40iw_find_sd_index_limit'
drivers/infiniband/hw/i40iw/i40iw_hmc.c:64: warning: Excess function parameter 'index' description in 'i40iw_find_sd_index_limit'
drivers/infiniband/hw/i40iw/i40iw_hmc.c:94: warning: Function parameter or member 'pd_idx' not described in 'i40iw_find_pd_index_limit'
drivers/infiniband/hw/i40iw/i40iw_hmc.c:94: warning: Excess function parameter 'pd_index' description in 'i40iw_find_pd_index_limit'
Link: https://lore.kernel.org/r/20210118223929.512175-2-lee.jones@linaro.org
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In commit e28bf1f03b ("RDMA: Convert various random sprintf sysfs _show
uses to sysfs_emit") I mistakenly used len = sysfs_emit_at to overwrite
the last trailing space of potentially multiple entry output.
Instead use a more common style by removing the trailing space from the
output formats and adding a prefixing space to the contination formats and
converting the final terminating output newline from the defective
len = sysfs_emit_at(buf, len, "\n");
to the now appropriate and typical
len += sysfs_emit_at(buf, len, "\n");
Fixes: e28bf1f03b ("RDMA: Convert various random sprintf sysfs _show uses to sysfs_emit")
Link: https://lore.kernel.org/r/5eb794b9c9bca0494d94b2b209f1627fa4e7b555.camel@perches.com
Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This reverts commit fbdd0049d9.
Due to commit in fixes tag, netdevice events were received only in one net
namespace of mlx5_core_dev. Due to this when netdevice events arrive in
net namespace other than net namespace of mlx5_core_dev, they are missed.
This results in empty GID table due to RDMA device being detached from its
net device.
Hence, revert back to receive netdevice events in all net namespaces to
restore back RDMA functionality in non init_net net namespace. The
deadlock will have to be addressed in another patch.
Fixes: fbdd0049d9 ("RDMA/mlx5: Fix devlink deadlock on net namespace deletion")
Link: https://lore.kernel.org/r/20210117092633.10690-1-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
GFP_KERNEL may cause ida_alloc_range() to sleep, but the spinlock covering
this function is not allowed to sleep, so the spinlock needs to be changed
to mutex.
As there is a certain chance of memory allocation failure, GFP_ATOMIC is
not suitable for QP allocation scenarios.
Fixes: 71586dd200 ("RDMA/hns: Create QP with selected QPN for bank load balance")
Link: https://lore.kernel.org/r/1611048513-28663-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The PVRDMA device HW interface defines network_hdr_type according to an
old definition of the internal kernel rdma_network_type enum that has
since changed, resulting in the wrong rdma_network_type being reported.
Fix this by explicitly defining the enum used by the PVRDMA device and
adding a function to convert the pvrdma_network_type to rdma_network_type
enum.
Cc: stable@vger.kernel.org # 5.10+
Fixes: 1c15b4f2a4 ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type")
Link: https://lore.kernel.org/r/1611026189-17943-1-git-send-email-bryantan@vmware.com
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5_query_mad_ifc_smp_attr_node_info() is internal to mad.c Hence, make
it static.
Link: https://lore.kernel.org/r/20210113121703.559778-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reduce the number of instructions made for setting protection caps. No
need to do bitwise OR with 0 since we can zero the return value in the
beginning of the function.
Link: https://lore.kernel.org/r/20210111145754.56727-5-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove the check from the module_init function.
Link: https://lore.kernel.org/r/20210111145754.56727-3-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
No need to add semicolon after closing bracket.
Link: https://lore.kernel.org/r/20210111145754.56727-2-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
Be more strict with DEVX get/set operations for the obj_id.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'devx_set_get':
RDMA/mlx5: Use strict get/set operations for obj_id
RDMA/mlx5: Use the correct obj_id upon DEVX TIR creation
net/mlx5: Expose ifc bits for query modify header
Use strict get/set operations for obj_id based on the specific object
type. This comes to prevent any miss match between the general header to
the legacy header commands.
Link: https://lore.kernel.org/r/20201230130121.180350-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the correct obj_id upon DEVX TIR creation by strictly taking the tirn
24 bits and not the general obj_id which is 32 bits.
Fixes: 7efce3691d ("IB/mlx5: Add obj create and destroy functionality")
Link: https://lore.kernel.org/r/20201230130121.180350-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The max_recv_sge value is wrongly reported when calling query_qp, This is
happening due to a typo when assigning the max_recv_sge value, the value
of sq_max_sges was assigned instead of rq_max_sges.
Fixes: 3e5c02c9ef ("iw_cxgb4: Support query_qp() verb")
Link: https://lore.kernel.org/r/20210114191423.423529-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use if/else clause instead of "condition ? val1 : val2" to make the code
cleaner and simpler.
Link: https://lore.kernel.org/r/20210110111903.486681-3-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
No need to add semicolon after closing bracket.
Link: https://lore.kernel.org/r/20210110111903.486681-2-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The Linux convention is to have only 1 new line between functions.
Link: https://lore.kernel.org/r/20210110111903.486681-1-mgurtovoy@nvidia.com
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allow users to create bigger MRs. Remove the check that prevented creating
MRs with number of pages more than 512.
Link: https://lore.kernel.org/r/1610012608-14528-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Refactor code that populates MR page buffer list. Instead of allocating a
pbl_tbl to hold the buffer list, pass the struct ib_umem directly to
bnxt_qplib_alloc_init_hwq() as done for other user space memories. Fix
the PBL level to handle the above mentioned change.
Also, remove an unwanted flag from the input to bnxt_qplib_reg_mr()
function.
Link: https://lore.kernel.org/r/1610012608-14528-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to improve performance by balancing the load between different
banks of cache, the CQC cache is desigend to choose one of 4 banks
according to lower 2 bits of CQN. The hns driver needs to count the number
of CQ on each bank and then assigns the CQ being created to the bank with
the minimum load first.
Link: https://lore.kernel.org/r/1610008589-35770-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The bounded counter can't be reconfigured to be in auto mode, in attempt
to do it, the user will get an error, but without any hint why. Update
nldev interface to return an error message through extack mechanism.
Link: https://lore.kernel.org/r/20201230130240.180737-1-leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix up wr_avail accounting. if wr_cnt is 0, then we do SIGNAL for first
wr, in completion we add queue_depth back, which is not right in the
sense of tracking for available wr.
So fix it by init wr_cnt to 1.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-19-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We do not need to wait for REG_MR completion, so remove the
SIGNAL flag.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-18-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We may want to add new flags, so it's better to use bitmask to check flags.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-17-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For HB, there is no need to generate signal for completion.
Also remove a comment accordingly.
Fixes: c0894b3ea6 ("RDMA/rtrs: core: lib functions shared between client and server modules")
Link: https://lore.kernel.org/r/20201217141915.56989-16-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reported-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make all failure cases go to the common path to avoid duplicate code.
And some issued existed before.
1. clt need to be freed to avoid memory leak.
2. return ERR_PTR(-ENOMEM) if kobject_create_and_add fails, because
rtrs_clt_open checks the return value of by call "IS_ERR(clt)".
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-15-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We had a few places wr_cqe is not set, which could lead to NULL pointer
deref or GPF in error case.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-14-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Let's rename it to rtrs_clt_change_state since the previous one is
killed.
Also update the comment to make it more clear.
Link: https://lore.kernel.org/r/20201217141915.56989-13-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is just a wrapper of rtrs_clt_change_state_get_old, and we can reuse
rtrs_clt_change_state_get_old with add the checking of 'old_state' is
valid or not.
Link: https://lore.kernel.org/r/20201217141915.56989-12-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is not needed since the label is just after the place.
Link: https://lore.kernel.org/r/20201217141915.56989-11-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Let's wait the inflight permits before free it.
Link: https://lore.kernel.org/r/20201217141915.56989-10-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Since the two functions are called together, let's consolidate them in
a new function rtrs_clt_destroy_sysfs_root.
Link: https://lore.kernel.org/r/20201217141915.56989-9-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Per the comment of kobject_init_and_add, we need to free the memory
by call kobject_put.
Fixes: 215378b838 ("RDMA/rtrs: client: sysfs interface functions")
Fixes: 91b11610af ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20201217141915.56989-8-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rtrs_iu_free is called in rtrs_iu_alloc if memory is limited, so we
don't need to free the same iu again.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-7-jinpu.wang@cloud.ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently rtrs when create_qp use a coarse numbers (bigger in general),
which leads to hardware create more resources which only waste memory
with no benefits.
- SERVICE con,
For max_send_wr/max_recv_wr, it's 2 times SERVICE_CON_QUEUE_DEPTH + 2
- IO con
For max_send_wr/max_recv_wr, it's sess->queue_depth * 3 + 1
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-6-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove self first to avoid deadlock, we don't want to
use close_work to remove sess sysfs.
Fixes: 91b11610af ("RDMA/rtrs: server: sysfs interface functions")
Link: https://lore.kernel.org/r/20201217141915.56989-5-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Tested-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In this error case, we don't need hold mutex to call close_sess.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20201217141915.56989-4-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Tested-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rtrs does not have same limit for both max_send_wr and max_recv_wr,
To allow client and server set different values, export in a separate
parameter for rtrs_cq_qp_create.
Also fix the type accordingly, u32 should be used instead of u16.
Fixes: c0894b3ea6 ("RDMA/rtrs: core: lib functions shared between client and server modules")
Link: https://lore.kernel.org/r/20201217141915.56989-2-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In default_roce_mode_store(), we took a reference to cma_dev, but didn't
return it with cma_dev_put in the error flow.
Fixes: 1c15b4f2a4 ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type")
Link: https://lore.kernel.org/r/20210113130214.562108-1-leon@kernel.org
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the allocation of the fast path blue flame register fails, the driver
should free the regular blue flame register allocated a statement above,
not the one that it just failed to allocate.
Fixes: 16c1975f10 ("IB/mlx5: Create profile infrastructure to add and remove stages")
Link: https://lore.kernel.org/r/20210113121703.559778-6-leon@kernel.org
Reported-by: Hans Petter Selasky <hanss@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rounddown_pow_of_two() is undefined when the input is 0. Therefore we need
to avoid it in ib_umem_find_best_pgsz and return 0. Otherwise, it could
result in not rejecting an invalid page size which eventually causes a
kernel oops due to the logical inconsistency.
Fixes: 3361c29e92 ("RDMA/umem: Use simpler logic for ib_umem_find_best_pgsz()")
Link: https://lore.kernel.org/r/20210113121703.559778-2-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix a race in rxe_mcast.c that occurs when two QPs try at the same time to
attach a multicast address. Both QPs lookup the mgid address in a pool of
multicast groups and if they do not find it create a new group elem.
Fix this by locking the lookup/alloc/add key sequence and using the
unlocked APIs added in this patch set.
Link: https://lore.kernel.org/r/20201216231550.27224-8-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The existing pool APIs use the rw_lock pool_lock to protect critical
sections that change the pool state. This does not correctly implement a
typical sequence like the following
elem = <lookup key in pool>
if found use elem else
elem = <alloc new elem in pool>
<add key to elem>
Which is racy if multiple threads are attempting to perform this at the
same time. We want the second thread to use the elem created by the first
thread not create two equivalent elems.
This patch adds new APIs that are the same as existing APIs but do not
take the pool_lock. A caller can then take the lock and perform a sequence
of pool operations and then release the lock.
Link: https://lore.kernel.org/r/20201216231550.27224-7-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace 'void *' parameters with 'struct rxe_pool_entry *' and use a macro
to allow:
rxe_add_index,
rxe_drop_index,
rxe_add_key,
rxe_drop_key and
rxe_add_to_pool
APIs to be type safe against changing the position of pelem in the
objects.
Link: https://lore.kernel.org/r/20201216231550.27224-6-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The allocate, lookup index, lookup key and cleanup routines in rxe_pool.c
currently are not type safe against relocating the pelem field in the
objects. Planned changes to move allocation of objects into rdma-core make
addressing this a requirement.
Use the elem_offset field in rxe_type_info make these APIs safe against
moving the pelem field.
Link: https://lore.kernel.org/r/20201216231550.27224-5-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The rxe verbs objects each include an rdma-core object 'ib_xxx'
and a rxe_pool_entry 'pelem' in addition to rxe specific data.
Originally these all had pelem first and ib_xxx second. Currently
about half have ib_xxx first and half have pelem first. Saving
the offset of the pelem field in rxe_type info will enable making
the rxe_pool APIs type safe as the pelem field continues to vary.
Link: https://lore.kernel.org/r/20201216231550.27224-4-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allow both indices and keys to exist for objects in pools. Previously you
were limited to one or the other.
This is required for later implementing rxe memory windows.
Link: https://lore.kernel.org/r/20201216231550.27224-3-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove RXE_POOL_ATOMIC flag from rxe_type_info for AH objects. These
objects are now allocated by rdma/core so there is no further reason for
this flag.
Link: https://lore.kernel.org/r/20201216231550.27224-2-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current rdma_rxe only supports five QP types, attempting to create any
others should return an error - the type check was missed.
Link: https://lore.kernel.org/r/20201216071755.149449-2-yangx.jy@cn.fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
During connection setup, the application may choose to zero-size inbound
and outbound READ queues, as well as the Receive queue. This patch fixes
handling of zero-sized queues, but not prevents it.
Kamal Heib says in an initial error report:
When running the blktests over siw the following shift-out-of-bounds is
reported, this is happening because the passed IRD or ORD from the ulp
could be zero which will lead to unexpected behavior when calling
roundup_pow_of_two(), fix that by blocking zero values of ORD or IRD.
UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 20 PID: 3957 Comm: kworker/u64:13 Tainted: G S 5.10.0-rc6 #2
Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
dump_stack+0x99/0xcb
ubsan_epilogue+0x5/0x40
__ubsan_handle_shift_out_of_bounds.cold.11+0xb4/0xf3
? down_write+0x183/0x3d0
siw_qp_modify.cold.8+0x2d/0x32 [siw]
? __local_bh_enable_ip+0xa5/0xf0
siw_accept+0x906/0x1b60 [siw]
? xa_load+0x147/0x1f0
? siw_connect+0x17a0/0x17a0 [siw]
? lock_downgrade+0x700/0x700
? siw_get_base_qp+0x1c2/0x340 [siw]
? _raw_spin_unlock_irqrestore+0x39/0x40
iw_cm_accept+0x1f4/0x430 [iw_cm]
rdma_accept+0x3fa/0xb10 [rdma_cm]
? check_flush_dependency+0x410/0x410
? cma_rep_recv+0x570/0x570 [rdma_cm]
nvmet_rdma_queue_connect+0x1a62/0x2680 [nvmet_rdma]
? nvmet_rdma_alloc_cmds+0xce0/0xce0 [nvmet_rdma]
? lock_release+0x56e/0xcc0
? lock_downgrade+0x700/0x700
? lock_downgrade+0x700/0x700
? __xa_alloc_cyclic+0xef/0x350
? __xa_alloc+0x2d0/0x2d0
? rdma_restrack_add+0xbe/0x2c0 [ib_core]
? __ww_mutex_die+0x190/0x190
cma_cm_event_handler+0xf2/0x500 [rdma_cm]
iw_conn_req_handler+0x910/0xcb0 [rdma_cm]
? _raw_spin_unlock_irqrestore+0x39/0x40
? trace_hardirqs_on+0x1c/0x150
? cma_ib_handler+0x8a0/0x8a0 [rdma_cm]
? __kasan_kmalloc.constprop.7+0xc1/0xd0
cm_work_handler+0x121c/0x17a0 [iw_cm]
? iw_cm_reject+0x190/0x190 [iw_cm]
? trace_hardirqs_on+0x1c/0x150
process_one_work+0x8fb/0x16c0
? pwq_dec_nr_in_flight+0x320/0x320
worker_thread+0x87/0xb40
? __kthread_parkme+0xd1/0x1a0
? process_one_work+0x16c0/0x16c0
kthread+0x35f/0x430
? kthread_mod_delayed_work+0x180/0x180
ret_from_fork+0x22/0x30
Fixes: a531975279 ("rdma/siw: main include file")
Fixes: f29dd55b02 ("rdma/siw: queue pair methods")
Fixes: 8b6a361b8c ("rdma/siw: receive path")
Fixes: b9be6f18cf ("rdma/siw: transmit path")
Fixes: 303ae1cdfd ("rdma/siw: application interface")
Link: https://lore.kernel.org/r/20210108125845.1803-1-bmt@zurich.ibm.com
Reported-by: Kamal Heib <kamalheib1@gmail.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In ocrdma_dealloc_ucontext_pd() uctx->cntxt_pd is assigned to the variable
pd and then after uctx->cntxt_pd is freed, the variable pd is passed to
function _ocrdma_dealloc_pd() which dereferences pd directly or through
its call to ocrdma_mbx_dealloc_pd().
Reorder the free using the variable pd.
Cc: stable@vger.kernel.org
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20201230024653.1516495-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If usnic_ib_qp_grp_create() fails at the first call, dev_list
will not be freed on error, which leads to memleak.
Fixes: e3cf00d0a8 ("IB/usnic: Add Cisco VIC low-level hardware driver")
Link: https://lore.kernel.org/r/20201226074248.2893-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The parameter of kfree function is NULL, so kfree code is useless, delete
it. Therefore, goto expression is no longer needed, so simplify
it. cma_dev_group is always pre-zero'd before reaching make_cma_ports, so
the NULL set to cma_dev_group->ports is unneeded too.
Link: https://lore.kernel.org/r/20201216080219.18184-1-zhengyongjun3@huawei.com
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
See Documentation/core-api/printk-formats.rst. h should no longer be used
in the format specifier for printk.
Link: https://lore.kernel.org/r/20201215183509.2072517-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This change fixes the checkpatch warning described in
commit cbacb5ab0a ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless so
do not encourage the use of %hh[xudi] or %h[xudi].
Link: https://lore.kernel.org/r/20201223193041.122850-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
xa_alloc_cyclic() call returns positive number if ID allocation
succeeded but wrapped. It is not an error, so normalize the "ret"
variable to zero as marker of not-an-error.
drivers/infiniband/core/restrack.c:261 rdma_restrack_add()
warn: 'ret' can be either negative or positive
Fixes: fd47c2f99f ("RDMA/restrack: Convert internal DB from hash to XArray")
Link: https://lore.kernel.org/r/20201216100753.1127638-1-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The destruction flow is very complicated here because the cm_id can be
destroyed from the event handler at any time if the device is
hot-removed. This leaves behind a partial ctx with no cm_id in the
xarray, and will let user space leak memory.
Make everything consistent in this flow in all places:
- Return the xarray back to XA_ZERO_ENTRY before beginning any
destruction. The thread that reaches this first is responsible to
kfree, everyone else does nothing.
- Test the xarray during the special hot-removal case to block the
queue_work, this has much simpler locking and doesn't require a
'destroying'
- Fix the ref initialization so that it is only positive if cm_id !=
NULL, then rely on that to guide the destruction process in all cases.
Now the new ucma_destroy_private_ctx() can be called in all places that
want to free the ctx, including all the error unwinds, and none of the
details are missed.
Fixes: a1d33b70db ("RDMA/ucma: Rework how new connections are passed through event delivery")
Link: https://lore.kernel.org/r/20210105111327.230270-1-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Previously the rnbd client requested the rtrs to allocate rnbd_iu
just after the rtrs_iu. So the rnbd client passes the size of
rnbd_iu for rtrs_clt_open() and rtrs creates an array of
rnbd_iu and rtrs_iu.
For IO handling, rnbd_iu exists after the request because we pass
the size of rnbd_iu when setting the tag-set. Therefore we do not
use the rnbd_iu allocated by rtrs for IO handling.
We only use the rnbd_iu allocated by rtrs when doing session
initialization. Almost all rnbd_iu allocated by rtrs are wasted.
By this patch the rnbd client does not request rnbd_iu allocation
to rtrs but allocate it for itself when doing session initialization.
Also remove unused rtrs_permit_to_pdu from rtrs.
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A smaller set of patches, nothing stands out as being particularly major
this cycle:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw, cxgb4,
mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl/aNXUACgkQOG33FX4g
mxqlMQ/+O6UhxKnDAnMB+HzDGvOm+KXNHOQBuzxz4ZWXqtUrW8WU5ca3PhXovc4z
/QX0HhMhQmVsva5mjp1OGVATxQ2E+yasqFLg4QXAFWFR3N7s0u/sikE9i1DoPvOC
lsmLTeRauCFaE4mJD5nvYwm+riECX0GmyVVW7v6V05xwAp0hwdhyU7Kb6Yh3lxsE
umTz+onPNJcD6Tc4snziyC5QEp5ebEjAaj4dVI1YPR5X0c2RwC5E1CIDI6u4OQ2k
j7/+Kvo8LNdYNERGiR169x6c1L7WS6dYnGMMeXRgyy0BVbVdRGDnvCV9VRmF66w5
99fHfDjNMNmqbGNt/4/gwNdVrR9aI4jMZWCh7SmsguX6XwNOlhYldy3x3WnlkfkQ
e4O0huJceJqcB2Uya70GqufnAetRXsbjzcvWxpR5YAwRmcRkm1f6aGK3BxPjWEbr
BbYRpiKMxxT4yTe65BuuThzx6g4pNQHe0z3BM/dzMJQAX+PZcs1CPQR8F8PbCrZR
Ad7qw4HJ587PoSxPi3toVMpYZRP6cISh1zx9q/JCj8cxH9Ri4MovUCS3cF63Ny3B
1LJ2q0x8FuLLjgZJogKUyEkS8OO6q7NL8WumjvrYWWx19+jcYsV81jTRGSkH3bfY
F7Esv5K2T1F2gVsCe1ZFFplQg6ja1afIcc+LEl8cMJSyTdoSub4=
=9t8b
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A smaller set of patches, nothing stands out as being particularly
major this cycle. The biggest item would be the new HIP09 HW support
from HNS, otherwise it was pretty quiet for new work here:
- Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw,
cxgb4, mlx4 and mlx5
- Bug fixes and polishing for the new rts ULP
- Cleanup of uverbs checking for allowed driver operations
- Use sysfs_emit all over the place
- Lots of bug fixes and clarity improvements for hns
- hip09 support for hns
- NDR and 50/100Gb signaling rates
- Remove dma_virt_ops and go back to using the IB DMA wrappers
- mlx5 optimizations for contiguous DMA regions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits)
RDMA/cma: Don't overwrite sgid_attr after device is released
RDMA/mlx5: Fix MR cache memory leak
RDMA/rxe: Use acquire/release for memory ordering
RDMA/hns: Simplify AEQE process for different types of queue
RDMA/hns: Fix inaccurate prints
RDMA/hns: Fix incorrect symbol types
RDMA/hns: Clear redundant variable initialization
RDMA/hns: Fix coding style issues
RDMA/hns: Remove unnecessary access right set during INIT2INIT
RDMA/hns: WARN_ON if get a reserved sl from users
RDMA/hns: Avoid filling sl in high 3 bits of vlan_id
RDMA/hns: Do shift on traffic class when using RoCEv2
RDMA/hns: Normalization the judgment of some features
RDMA/hns: Limit the length of data copied between kernel and userspace
RDMA/mlx4: Remove bogus dev_base_lock usage
RDMA/uverbs: Fix incorrect variable type
RDMA/core: Do not indicate device ready when device enablement fails
RDMA/core: Clean up cq pool mechanism
RDMA/core: Update kernel documentation for ib_create_named_qp()
MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address
...
This series consists of the usual driver updates (ufs, qla2xxx,
smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of
cleanups, a major power management rework and a load of assorted minor
updates. There are a few core updates (formatting fixes being the big
one) but nothing major this cycle.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX9o0KSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbOZAP9D5NTN
J7dJUo2MIMy84YBu+d9ag7yLlNiRWVY2yw5vHwD/Z7JjAVLwz/tzmyjU9//o2J6w
hwhOv6Uto89gLCWSEz8=
=KUPT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
power management rework and a load of assorted minor updates.
There are a few core updates (formatting fixes being the big one) but
nothing major this cycle"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: mpt3sas: Update driver version to 36.100.00.00
scsi: mpt3sas: Handle trigger page after firmware update
scsi: mpt3sas: Add persistent MPI trigger page
scsi: mpt3sas: Add persistent SCSI sense trigger page
scsi: mpt3sas: Add persistent Event trigger page
scsi: mpt3sas: Add persistent Master trigger page
scsi: mpt3sas: Add persistent trigger pages support
scsi: mpt3sas: Sync time periodically between driver and firmware
scsi: qla2xxx: Update version to 10.02.00.104-k
scsi: qla2xxx: Fix device loss on 4G and older HBAs
scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
scsi: qla2xxx: Fix the call trace for flush workqueue
scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
scsi: qla2xxx: Fix N2N and NVMe connect retry failure
scsi: qla2xxx: Fix FW initialization error on big endian machines
scsi: qla2xxx: Fix crash during driver load on big endian machines
scsi: qla2xxx: Fix compilation issue in PPC systems
scsi: qla2xxx: Don't check for fw_started while posting NVMe command
scsi: qla2xxx: Tear down session if FW say it is down
...
If the MR cache entry invalidation failed, then we detach this entry from
the cache, therefore we must to free the memory as well.
Allcation backtrace for the leaker:
[<00000000d8e423b0>] alloc_cache_mr+0x23/0xc0 [mlx5_ib]
[<000000001f21304c>] create_cache_mr+0x3f/0xf0 [mlx5_ib]
[<000000009d6b45dc>] mlx5_ib_alloc_implicit_mr+0x41/0×210 [mlx5_ib]
[<00000000879d0d68>] mlx5_ib_reg_user_mr+0x9e/0×6e0 [mlx5_ib]
[<00000000be74bf89>] create_qp+0x2fc/0xf00 [ib_uverbs]
[<000000001a532d22>] ib_uverbs_handler_UVERBS_METHOD_COUNTERS_READ+0x1d9/0×230 [ib_uverbs]
[<0000000070f46001>] rdma_alloc_commit_uobject+0xb5/0×120 [ib_uverbs]
[<000000006d8a0b38>] uverbs_alloc+0x2b/0xf0 [ib_uverbs]
[<00000000075217c9>] ksysioctl+0x234/0×7d0
[<00000000eb5c120b>] __x64_sys_ioctl+0x16/0×20
[<00000000db135b48>] do_syscall_64+0x59/0×2e0
Fixes: 1769c4c575 ("RDMA/mlx5: Always remove MRs from the cache before destroying them")
Link: https://lore.kernel.org/r/20201213132940.345554-2-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change work and completion queues to use smp_load_acquire() and
smp_store_release() to synchronize between driver and users. This commit
goes with a matching series of commits in the rxe user space provider.
Link: https://lore.kernel.org/r/20201210174258.5234-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to get queue number repeatly for different queues from an
AEQE entity, as they are the same. Furthermore, redefine the AEQE
structure to make the codes more readable.
In addition, HNS_ROCE_EVENT_TYPE_CEQ_OVERFLOW is removed because the
hardware never reports this event.
Link: https://lore.kernel.org/r/1607650657-35992-12-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Some %d in print format string should be %u, and some prints miss the
useful errno or are in nonstandard format. Just fix above issues.
Link: https://lore.kernel.org/r/1607650657-35992-11-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Types of some fields, variables and parameters of some functions should be
unsigned.
Link: https://lore.kernel.org/r/1607650657-35992-10-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to initialize some variable because they will be assigned
with a value later.
Link: https://lore.kernel.org/r/1607650657-35992-9-git-send-email-liweihang@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Just format the code without modifying anything, including fixing some
redundant and missing blanks and spaces and changing the variable
definition order.
Link: https://lore.kernel.org/r/1607650657-35992-8-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As the qp access right is checked and setted in common function
hns_roce_v2_set_opt_fields(), there is no need to set again for a special
case INIT2INIT.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Fixes: 7db82697b8 ("RDMA/hns: Add support for extended atomic in userspace")
Link: https://lore.kernel.org/r/1607650657-35992-7-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the RoCE v1 specification, the sl (service level) 0-7 are
mapped directly to priorities 0-7 respectively, sl 8-15 are reserved. The
driver should verify whether the value of sl is larger than 7, if so, an
exception should be returned.
Link: https://lore.kernel.org/r/1607650657-35992-6-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Only the low 12 bits of vlan_id is valid, and service level has been
filled in Address Vector. So there is no need to fill sl in vlan_id in
Address Vector.
Fixes: 7406c0036f ("RDMA/hns: Only record vlan info for HIP08")
Link: https://lore.kernel.org/r/1607650657-35992-5-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The high 6 bits of traffic class in GRH is DSCP (Differentiated Services
Codepoint), the driver should shift it before the hardware gets it when
using RoCEv2.
Fixes: 606bf89e98 ("RDMA/hns: Refactor for hns_roce_v2_modify_qp function")
Fixes: fba429fcf9 ("RDMA/hns: Fix missing fields in address vector")
Link: https://lore.kernel.org/r/1607650657-35992-4-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Whether to enable the these features should better depend on the enable
flags, not the value of related fields.
Fixes: 5c1f167af1 ("RDMA/hns: Init SRQ table for hip08")
Fixes: 3cb2c996c9 ("RDMA/hns: Add support for SCCC in size of 64 Bytes")
Link: https://lore.kernel.org/r/1607650657-35992-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For ib_copy_from_user(), the length of udata may not be the same as that
of cmd. For ib_copy_to_user(), the length of udata may not be the same as
that of resp. So limit the length to prevent out-of-bounds read and write
operations from ib_copy_from_user() and ib_copy_to_user().
Fixes: de77503a59 ("RDMA/hns: RDMA/hns: Assign rq head pointer when enable rq record db")
Fixes: 633fb4d9fd ("RDMA/hns: Use structs to describe the uABI instead of opencoding")
Fixes: ae85bf92ef ("RDMA/hns: Optimize qp param setup flow")
Fixes: 6fd610c573 ("RDMA/hns: Support 0 hop addressing for SRQ buffer")
Fixes: 9d9d4ff788 ("RDMA/hns: Update the kernel header file of hns")
Link: https://lore.kernel.org/r/1607650657-35992-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It is not clear what this lock protects. If the authors wanted to ensure
that "dev" does not disappear, that is impossible, given the following
code path:
mlx4_ib_netdev_event (under RTNL mutex)
-> mlx4_ib_scan_netdevs
-> mlx4_ib_update_qps
Also, the dev_base_lock does not protect dev->dev_addr either.
So it serves no purpose here. Remove it.
Link: https://lore.kernel.org/r/20201208193928.1500893-1-vladimir.oltean@nxp.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix incorrect type of max_entries in UVERBS_METHOD_QUERY_GID_TABLE -
max_entries is of type size_t although it can take negative values.
The following static check revealed it:
drivers/infiniband/core/uverbs_std_types_device.c:338 ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE() warn: 'max_entries' unsigned <= 0
Fixes: 9f85cbe50a ("RDMA/uverbs: Expose the new GID query API to user space")
Link: https://lore.kernel.org/r/20201208073545.9723-4-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In procedure ib_register_device, procedure kobject_uevent is called
(advertising that the device is ready for userspace usage) even when
device_enable_and_get() returned an error.
As a result, various RDMA modules attempted to register for the device
even while the device driver was preparing to unregister the device.
Fix this by advertising the device availability only after enabling the
device succeeds.
Fixes: e7a5b4aafd ("RDMA/device: Don't fire uevent before device is fully initialized")
Link: https://lore.kernel.org/r/20201208073545.9723-3-leon@kernel.org
Suggested-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The CQ pool mechanism had two problems:
1. The CQ pool lists were uninitialized in the device registration error
flow. As a result, all the list pointers remained NULL. This caused
the kernel to crash (in procedure ib_cq_pool_destroy) when that error
flow was taken (and unregister called). The stack trace snippet:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0×0000) ? not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
. . .
RIP: 0010:ib_cq_pool_destroy+0x1b/0×70 [ib_core]
. . .
Call Trace:
disable_device+0x9f/0×130 [ib_core]
__ib_unregister_device+0x35/0×90 [ib_core]
ib_register_device+0x529/0×610 [ib_core]
__mlx5_ib_add+0x3a/0×70 [mlx5_ib]
mlx5_add_device+0x87/0×1c0 [mlx5_core]
mlx5_register_interface+0x74/0xc0 [mlx5_core]
do_one_initcall+0x4b/0×1f4
do_init_module+0x5a/0×223
load_module+0x1938/0×1d40
2. At device unregister, when cleaning up the cq pool, the cq's in the
pool lists were freed, but the cq entries were left in the list.
The fix for the first issue is to initialize the cq pool lists when the
ib_device structure is allocated for a new device (in procedure
_ib_alloc_device).
The fix for the second problem is to delete cq entries from the pool lists
when cleaning up the cq pool.
In addition, procedure ib_cq_pool_destroy() is renamed to the more
appropriate name ib_cq_pool_cleanup().
Fixes: 4aa1615268 ("RDMA/core: Fix ordering of CQ pool destruction")
Link: https://lore.kernel.org/r/20201208073545.9723-2-leon@kernel.org
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit 66f57b871e ("RDMA/restrack: Support all QP types") extends
ib_create_qp() to a named ib_create_named_qp(), which takes the caller's
name as argument, but it did not add the new argument description to the
function's kerneldoc.
make htmldocs warns:
./drivers/infiniband/core/verbs.c:1206: warning: Function parameter or member 'caller' not described in 'ib_create_named_qp'
Add a description for this new argument based on the description of the
same argument in other related functions.
Fixes: 66f57b871e ("RDMA/restrack: Support all QP types")
Link: https://lore.kernel.org/r/20201207173255.13355-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Saeed Mahameed says:
====================
mlx5-next auxbus support
This pull request is targeting net-next and rdma-next branches.
This series provides mlx5 support for auxiliary bus devices.
It starts with a merge commit of tag 'auxbus-5.11-rc1' from
gregkh/driver-core into mlx5-next, then the mlx5 patches that will convert
mlx5 ulp devices (netdev, rdma, vdpa) to use the proper auxbus
infrastructure instead of the internal mlx5 device and interface management
implementation, which Leon is deleting at the end of this patchset.
Link: https://lore.kernel.org/alsa-devel/20201026111849.1035786-1-leon@kernel.org/
Thanks to everyone for the joint effort !
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
RDMA/mlx5: Remove IB representors dead code
net/mlx5: Simplify eswitch mode check
net/mlx5: Delete custom device management logic
RDMA/mlx5: Convert mlx5_ib to use auxiliary bus
net/mlx5e: Connect ethernet part to auxiliary bus
vdpa/mlx5: Connect mlx5_vdpa to auxiliary bus
net/mlx5: Register mlx5 devices to auxiliary virtual bus
vdpa/mlx5: Make hardware definitions visible to all mlx5 devices
net/mlx5_core: Clean driver version and name
net/mlx5: Properly convey driver version to firmware
driver core: auxiliary bus: minor coding style tweaks
driver core: auxiliary bus: make remove function return void
driver core: auxiliary bus: move slab.h from include file
Add auxiliary bus support
====================
Link: https://lore.kernel.org/r/20201207053349.402772-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The query_gid_table ioctl skips non IB/RoCE ports, which as a result
returns an empty gid table for devices such as EFA which have a GID table,
but are not IB/RoCE.
Fixes: c4b4d548fa ("RDMA/core: Introduce new GID table query API")
Link: https://lore.kernel.org/r/20201206153238.34878-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iser_initialize_task_headers() uses in_interrupt() to find out if it is
safe to acquire a mutex.
in_interrupt() is deprecated as it is ill defined and does not provide
what it suggests. Aside of that it covers only parts of the contexts in
which a mutex may not be acquired.
The following callchains exist:
iscsi_queuecommand() *locks* iscsi_session::frwd_lock
-> iscsi_prep_scsi_cmd_pdu()
-> session->tt->init_task() (iscsi_iser_task_init())
-> iser_initialize_task_headers()
-> iscsi_iser_task_xmit() (iscsi_transport::xmit_task)
-> iscsi_iser_task_xmit_unsol_data()
-> iser_send_data_out()
-> iser_initialize_task_headers()
iscsi_data_xmit() *locks* iscsi_session::frwd_lock
-> iscsi_prep_mgmt_task()
-> session->tt->init_task() (iscsi_iser_task_init())
-> iser_initialize_task_headers()
-> iscsi_prep_scsi_cmd_pdu()
-> session->tt->init_task() (iscsi_iser_task_init())
-> iser_initialize_task_headers()
__iscsi_conn_send_pdu() caller has iscsi_session::frwd_lock
-> iscsi_prep_mgmt_task()
-> session->tt->init_task() (iscsi_iser_task_init())
-> iser_initialize_task_headers()
-> session->tt->xmit_task() (
The only callchain that is close to be invoked in preemptible context:
iscsi_xmitworker() worker
-> iscsi_data_xmit()
-> iscsi_xmit_task()
-> conn->session->tt->xmit_task() (iscsi_iser_task_xmit()
In iscsi_iser_task_xmit() there is this check:
if (!task->sc)
return iscsi_iser_mtask_xmit(conn, task);
so it does end up in iser_initialize_task_headers() and
iser_initialize_task_headers() relies on iscsi_task::sc == NULL.
Remove conditional locking of iser_conn::state_mutex because there is no
call chain to do so. Remove the goto label and return early now that there
is no clean up needed.
Link: https://lore.kernel.org/r/20201204174256.62xfcvudndt7oufl@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Max Gurtovoy <maxg@nvidia.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, DM MR registration flow doesn't set the mlx5_ib_dev pointer and
can cause a NULL pointer dereference if userspace dumps the MR via rdma
tool.
Assign the IB device together with the other fields and remove the
redundant reference of mlx5_ib_dev from mlx5_ib_mr.
Cc: stable@vger.kernel.org
Fixes: 6c29f57ea4 ("IB/mlx5: Device memory mr registration support")
Link: https://lore.kernel.org/r/20201203190807.127189-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These flags will be returned to the userspace through ABI, so they should
be defined in hns-abi.h. Furthermore, there is no need to include
hns-abi.h in every source files, it just needs to be included in the
common header file.
Link: https://lore.kernel.org/r/1606872560-17823-1-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
While creating qps, the driver adds one extra entry to the sq size passed
by the ULPs in order to avoid queue full condition. When ULPs creates QPs
with max_qp_wr reported, driver creates QP with 1 more than the max_wqes
supported by HW. Create QP fails in this case. To avoid this error, reduce
1 entry in max_qp_wqes and report it to the stack.
Link: https://lore.kernel.org/r/1606741986-16477-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is all a giant train wreck of error handling, in many cases the MR is
left in some corrupted state where continuing on is going to lead to
chaos, or various unwinds/order is missed.
rereg had three possible completely different actions, depending on flags
and various details about the MR. Split the three actions into three
functions, and call the right action from the start.
For each action carefully design the error handling to fit the action:
- UMR access/PD update is a simple UMR, if it fails the MR isn't changed,
so do nothing
- PAS update over UMR is multiple UMR operations. To keep everything sane
revoke access to the MKey while it is being changed and restore it once
the MR is correct.
- Recreating the mkey should completely build a parallel MR with a fully
loaded PAS then swap and destroy the old one. If it fails the original
should be left untouched. This is handled in the core code. Directly
call the normal MR creation functions, possibly re-using the existing
umem.
Add support for working with ODP MRs. The READ/WRITE access flags can be
changed by UMR and we can trivially convert to/from ODP MRs using the
logic to build a completely new MR.
This new logic also fixes various problems with MRs continuing to work
while their PAS lists are no longer valid, eg during a page size change.
Link: https://lore.kernel.org/r/20201130075839.278575-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This function handles an ODP and regular MR flow all mushed together, even
though the two flows are quite different. Split them into two dedicated
functions.
Link: https://lore.kernel.org/r/20201130075839.278575-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5 has an ugly flow where it tries to allocate a new MR and replace the
existing MR in the same memory during rereg. This is very complicated and
buggy. Instead of trying to replace in-place inside the driver, provide
support from uverbs to change the entire HW object assigned to a handle
during rereg_mr.
Since destroying a MR is allowed to fail (ie if a MW is pointing at it)
and can't be detected in advance, the algorithm creates a completely new
uobject to hold the new MR and swaps the IDR entries of the two objects.
The old MR in the temporary IDR entry is destroyed, and if it fails
rereg_mr succeeds and destruction is deferred to FD release. This
complexity is why this cannot live in a driver safely.
Link: https://lore.kernel.org/r/20201130075839.278575-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
No reason only one caller checks this. This properly blocks ODP
from the rereg flow if the device does not support ODP.
Link: https://lore.kernel.org/r/20201130075839.278575-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Unknown flags should be EOPNOTSUPP, only zero flags is EINVAL. Flags is
actually the rereg action to perform.
The checking of the start/hca_va/etc is also redundant and ib_umem_get()
does these checks and returns proper error codes.
Fixes: 7e6edb9b2e ("IB/core: Add user MR re-registration support")
Link: https://lore.kernel.org/r/20201130075839.278575-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Provide mlx5_core device instead of "priv" pointer while checking
eswith mode.
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
The conversion to auxiliary bus solves long standing issue with
existing mlx5_ib<->mlx5_core coupling. It required to have both
modules in initramfs if one of them needed for the boot.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Use dma_set_mask_and_coherent() instead of pci_set_dma_mask() followed by
a pci_set_consistent_dma_mask().
Link: https://lore.kernel.org/r/20201201091811.37984-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The variable 'cnt' is used to represent the max number of sge an SQ WQE
can use at first, then it means how many extended sge an SQ has. In
addition, this function has no need to return a value. So refactor and
encapsulate the parts of getting number of extended sge a WQE can use to
make it easier to understand.
Link: https://lore.kernel.org/r/1606558959-48510-4-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Page alignment is required when setting the number of extended sge
according to the hardware's achivement. If the space of needed extended
sge is greater than one page, the roundup_pow_of_two() can ensure
that. But if the needed extended sge isn't 0 and can not be filled in a
whole page, the driver should align it specifically.
Fixes: 54d6638765 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1606558959-48510-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
One RC SQ WQE can store 2 sges but UD can't, so ignore 2 valid sges of
wr.sglist for RC which have been filled in WQE before setting extended
sge. Either of RC and UD can not contain 0-length sges, so these 0-length
sges should be skipped.
Fixes: 54d6638765 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1606558959-48510-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The local variables cur_state and new_state hold the state that should be
used for the modify QP operation instead of the ones in the ib_qp_attr
struct.
Fixes: 40909f664d ("RDMA/efa: Add EFA verbs implementation")
Link: https://lore.kernel.org/r/20201201091724.37016-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The push feature does not work as expected in x722 and has historically
been disabled in the driver.
Purge all remaining code related to the push feature in i40iw.
Link: https://lore.kernel.org/r/20201125005616.1800-3-shiraz.saleem@intel.com
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl/EM9oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/3kH/RNkFyTlHlUkZpJx
8Ks2yWgUln7YhZcmOaG/IcIyWnhCgo3l35kiaH7XxM+rPMZzidp51MHUllaTAQDc
u+5EFHMJsmTWUfE8ocHPb1cPdYEDSoVr6QUsixbL9+uADpRz+VZVtWMb89EiyMrC
wvLIzpnqY5UNriWWBxD0hrmSsT4g9XCsauer4k2KB+zvebwg6vFOMCFLFc2qz7fb
ABsrPFqLZOMp+16chGxyHP7LJ6ygI/Hwf7tPW8ppv4c+hes4HZg7yqJxXhV02QbJ
s10s6BTcEWMqKg/T6L/VoScsMHWUcNdvrr3uuPQhgup240XdmB1XO8rOKddw27e7
VIjrjNw=
=4ZaP
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rc6' into rdma.git for-next
For dependencies in following patches
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stash is a mechanism that uses the core information carried by the ARM AXI
bus to access the L3 cache. It can be used to improve the performance by
increasing the hit ratio of L3 cache. QPs need to enable stash by default.
Link: https://lore.kernel.org/r/1606374251-21512-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stash is a mechanism that uses the core information carried by the ARM AXI
bus to access the L3 cache. It can be used to improve the performance by
increasing the hit ratio of L3 cache. CQs need to enable stash by default.
Link: https://lore.kernel.org/r/1606374251-21512-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to improve performance by balancing the load between different
banks of cache, the QPC cache is desigend to choose one of 8 banks
according to lower 3 bits of QPN. The hns driver needs to count the number
of QP on each bank and then assigns the QP being created to the bank with
the minimum load first.
Link: https://lore.kernel.org/r/1606220649-1465-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
