In enic_ethtool.c there is no need to use static const variables to store
array sizes when a macro can be used instead.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20240912005039.10797-2-neescoba@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
net: fib_rules: Add DSCP selector support
Currently, the kernel rejects IPv4 FIB rules that try to match on the
upper three DSCP bits:
# ip -4 rule add tos 0x1c table 100
# ip -4 rule add tos 0x3c table 100
Error: Invalid tos.
The reason for that is that historically users of the FIB lookup API
only populated the lower three DSCP bits in the TOS field of the IPv4
flow key ('flowi4_tos'), which fits the TOS definition from the initial
IPv4 specification (RFC 791).
This is not very useful nowadays and instead some users want to be able
to match on the six bits DSCP field, which replaced the TOS and IP
precedence fields over 25 years ago (RFC 2474). In addition, the current
behavior differs between IPv4 and IPv6 which does allow users to match
on the entire DSCP field using the TOS selector.
Recent patchsets made sure that callers of the FIB lookup API now
populate the entire DSCP field in the IPv4 flow key. Therefore, it is
now possible to extend FIB rules to match on DSCP.
This is done by adding a new DSCP attribute which is implemented for
both IPv4 and IPv6 to provide user space programs a consistent behavior
between both address families.
The behavior of the old TOS selector is unchanged and IPv4 FIB rules
using it will only match on the lower three DSCP bits. The kernel will
reject rules that try to use both selectors.
Patch #1 adds the new DSCP attribute but rejects its usage.
Patches #2-#3 implement IPv4 and IPv6 support.
Patch #4 allows user space to use the new attribute.
Patches #5-#6 add selftests.
====================
Link: https://patch.msgid.link/20240911093748.3662015-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that locally generated traffic from a socket that specifies a DS
Field using the IP_TOS / IPV6_TCLASS socket options is correctly
redirected using a FIB rule that matches on DSCP. Add negative tests to
verify that the rule is not it when it should not. Test with both IPv4
and IPv6 and with both TCP and UDP sockets.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests for the new FIB rule DSCP selector. Test with both IPv4 and
IPv6 and with both input and output routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that both IPv4 and IPv6 support the new DSCP selector, enable user
space to configure FIB rules that make use of it by changing the policy
of the new DSCP attribute so that it accepts values in the range of [0,
63].
Use NLA_U8 rather than NLA_UINT as the field is of fixed size.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement support for the new DSCP selector that allows IPv6 FIB rules
to match on the entire DSCP field. This is done despite the fact that
the above can be achieved using the existing TOS selector, so that user
space program will be able to work with IPv4 and IPv6 rules in the same
way.
Differentiate between both selectors by adding a new bit in the IPv6 FIB
rule structure that is only set when the 'FRA_DSCP' attribute is
specified by user space. Reject rules that use both selectors.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement support for the new DSCP selector that allows IPv4 FIB rules
to match on the entire DSCP field, unlike the existing TOS selector that
only matches on the three lower DSCP bits.
Differentiate between both selectors by adding a new bit in the IPv4 FIB
rule structure (in an existing one byte hole) that is only set when the
'FRA_DSCP' attribute is specified by user space. Reject rules that use
both selectors.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The FIB rule TOS selector is implemented differently between IPv4 and
IPv6. In IPv4 it is used to match on the three "Type of Services" bits
specified in RFC 791, while in IPv6 is it is used to match on the six
DSCP bits specified in RFC 2474.
Add a new FIB rule attribute to allow matching on DSCP. The attribute
will be used to implement a 'dscp' selector in ip-rule with a consistent
behavior between IPv4 and IPv6.
For now, set the type of the attribute to 'NLA_REJECT' so that user
space will not be able to configure it. This restriction will be lifted
once both IPv4 and IPv6 support the new attribute.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During the firmware flashing process, notifications are sent to user
space to provide progress updates. When an error occurs, an error
message is sent to indicate what went wrong.
In some cases, appropriate error messages are missing.
Add relevant error messages where applicable, allowing user space to better
understand the issues encountered.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240910091044.3044568-1-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PCI vendor ID for Cadence is defined in pci_ids.h. Use it.
While at it, move to PCI_VDEVICE() macro and usual pattern for
PCI device ID.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240913125146.3628751-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clang static checker (scan-build) warning:
net/tipc/bcast.c:305:4:
The expression is an uninitialized value. The computed value will also
be garbage [core.uninitialized.Assign]
305 | (*cong_link_cnt)++;
| ^~~~~~~~~~~~~~~~~~
tipc_rcast_xmit() will increase cong_link_cnt's value, but cong_link_cnt
is uninitialized. Although it won't really cause a problem, it's better
to fix it.
Fixes: dca4a17d24 ("tipc: fix potential hanging after b/rcast changing")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://patch.msgid.link/20240912110119.2025503-1-suhui@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enetc driver uses ifdefs when checking whether
CONFIG_FSL_ENETC_PTP_CLOCK is enabled in a number of places. This works
if the driver is built-in but fails if the driver is available as a
kernel module. Replace the instances of ifdef with use of the IS_ENABLED
macro, that will evaluate as true when this feature is built as a kernel
module and follows the kernel's coding style.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240912173742.484549-1-martyn.welch@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver calls netif_napi_set_irq() and then calls netif_napi_add(),
which calls netif_napi_add_weight(). At the end of
netif_napi_add_weight() is a call to netif_napi_set_irq(napi, -1), which
clears the previously set napi->irq value. Fix this by calling
netif_napi_set_irq() after calling netif_napi_add().
This was found when reviewing another patch and I have no way to test
this, but the fix seemed relatively straight forward.
Fixes: bc6107771b ("eth: fbnic: Allocate a netdevice and napi vectors with queues")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20240912174922.10550-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a missing end of phrase in the documentation. It describes the
ETHTOOL_A_C33_PSE_ACTUAL_PW attribute, which was not fully explained.
Also, fix grammar issues by using simple present tense instead of
present continuous.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240912090550.743174-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Free the skb before returning from rpl_input when skb_cow_head() fails.
Use a "drop" label and goto instructions.
Fixes: a7a29f9c36 ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240911174557.11536-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
En-Wei reported that traffic breaks if cable is unplugged for more
than 3s and then re-plugged. This was supposed to be fixed by
621735f590 ("r8169: fix rare issue with broken rx after link-down on
RTL8125"). But apparently this didn't fix the issue for everybody.
The 3s threshold rang a bell, as this is the delay after which ALDPS
kicks in. And indeed disabling ALDPS fixes the issue for this user.
Maybe this fixes the issue in general. In a follow-up step we could
remove the first fix attempt and see whether anybody complains.
Fixes: f1bce4ad2f ("r8169: add support for RTL8125")
Tested-by: En-Wei WU <en-wei.wu@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/778b9d86-05c4-4856-be59-cde4487b9e52@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "err" is always zero, so the following branch can never be executed:
if (err) {
ndev->stats.rx_dropped++;
kfree_skb(skb);
}
Therefore, the "if" statement can be removed.
Use "ndev->stats.rx_errors" to count "napi_build_skb()" failure
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/20240911135828.378317-1-usama.anjum@collabora.com
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Link: https://patch.msgid.link/20240913014731.149739-1-qianqiang.liu@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
-----BEGIN PGP SIGNATURE-----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=ZAan
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
* tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits)
Bluetooth: btintel_pcie: Allocate memory for driver private data
Bluetooth: btusb: Fix not handling ZPL/short-transfer
Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
Bluetooth: btsdio: Do not bind to non-removable CYW4373
Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED
Bluetooth: replace deprecated strncpy with strscpy_pad
Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED
Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B
Bluetooth: Use led_set_brightness() in LED trigger activate() callback
Bluetooth: btrtl: Use kvmemdup to simplify the code
Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
Bluetooth: btrtl: Add the support for RTL8922A
Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
Bluetooth: hci_conn: Remove redundant memset after kzalloc
Bluetooth: L2CAP: Remove unused declarations
dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855
Bluetooth: btnxpuart: Add support for ISO packets
Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h
Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
...
====================
Link: https://patch.msgid.link/20240912214317.3054060-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During the introduction of struct bpf_net_context handling for
XDP-redirect, the netkit driver has been missed, which also requires it
because NETKIT_REDIRECT invokes skb_do_redirect() which is accessing the
per-CPU variables. Otherwise we see the following crash:
BUG: kernel NULL pointer dereference, address: 0000000000000038
bpf_redirect()
netkit_xmit()
dev_hard_start_xmit()
Set the bpf_net_context before invoking netkit_xmit() program within the
netkit driver.
Fixes: 401cb7dae8 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20240912155620.1334587-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In cases when synchronizing DMA operations is necessary,
xsk_buff_alloc_batch() returns a single buffer instead of the requested
count. This puts the pressure on drivers that use batch API as they have
to check for this corner case on their side and take care of allocations
by themselves, which feels counter productive. Let us improve the core
by looping over xp_alloc() @max times when slow path needs to be taken.
Another issue with current interface, as spotted and fixed by Dries, was
that when driver called xsk_buff_alloc_batch() with @max == 0, for slow
path case it still allocated and returned a single buffer, which should
not happen. By introducing the logic from first paragraph we kill two
birds with one stone and address this problem as well.
Fixes: 47e4075df3 ("xsk: Batched buffer allocation for the pool")
Reported-and-tested-by: Dries De Winter <ddewinter@synamedia.com>
Co-developed-by: Dries De Winter <ddewinter@synamedia.com>
Signed-off-by: Dries De Winter <ddewinter@synamedia.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20240911191019.296480-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=i+4X
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.11-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Prevent a possible deadlock (reported by lockdep) when a driver
relinquishes a pci_dev, another driver claims it, and one uses
managed pcim_enable_device() and the other doesn't (Philipp Stanner)
* tag 'pci-v6.11-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Fix potential deadlock in pcim_intx()
A few last minute fixes for v6.11, they're all individually unremarkable
and only last minute due to when they came in.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbkhAUACgkQJNaLcl1U
h9BpZwf+KiV2aTGSouHZsIM2hNcZr8Nm+DH8aJgRWzeddqZ2JD6Hwi1YaUckd1sC
rbXz6jMvjeG4EbVAokLyb3NudKa5GSoWmMKKeod620bX0Q9PAv+HpRiPK5/i5IFH
HFHlpjRScpchc/vISgPk0ELgc5eq0jdRZHS5vUWw2tdkc6dmwjb5nPNO4lHxpbYx
/ETQup7iPW9kfe5fUwWFhvD1MxHIwe1CGUtQLLZQPJdVaHWRD9AIZMTPu7DX0C6V
PLckCBwzZN+fWUX3xnxfveYG++pdNWaVFFjuRZdKVbNT7SgF7VawTaIK7BxCuqeV
fNuwheKH/lfzmdXlYGFVLjvyfVfSww==
=W3IJ
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few last minute fixes for v6.11, they're all individually
unremarkable and only last minute due to when they came in"
* tag 'spi-fix-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: nxp-fspi: fix the KASAN report out-of-bounds bug
spi: geni-qcom: Fix incorrect free_irq() sequence
spi: geni-qcom: Undo runtime PM changes at driver exit time
When CONFIG_TRACEPOINTS=y but CONFIG_PAGE_POOL=n, we end up with this
build failure that is reported by the 0-day bot:
ld: vmlinux.o: in function `mp_dmabuf_devmem_alloc_netmems':
>> (.text+0xc37286): undefined reference to `__tracepoint_page_pool_state_hold'
>> ld: (.text+0xc3729a): undefined reference to `__SCT__tp_func_page_pool_state_hold'
>> ld: vmlinux.o:(__jump_table+0x10c48): undefined reference to `__tracepoint_page_pool_state_hold'
>> ld: vmlinux.o:(.static_call_sites+0xb824): undefined reference to `__SCK__tp_func_page_pool_state_hold'
The root cause is that in this configuration, traces are enabled but the
page_pool specific trace_page_pool_state_hold is not registered.
There is no reason to build the dmabuf memory provider when
CONFIG_PAGE_POOL is not present, as it's really a provider to the
page_pool.
In fact the whole NET_DEVMEM is RX path-only at the moment, so we can
make the entire config dependent on the PAGE_POOL.
Note that this may need to be revisited after/while devmem TX is
added, as devmem TX likely does not need CONFIG_PAGE_POOL. For now this
build fix is sufficient.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409131239.ysHQh4Tv-lkp@intel.com/
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20240913060746.2574191-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Revert of earlier fix sent for non-continuous port map programming
which caused regression on Intel platforms
-----BEGIN PGP SIGNATURE-----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=jVK0
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.11-fixes_2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Revert of earlier fix sent for non-continuous port map programming
which caused regression on Intel platforms
* tag 'soundwire-6.11-fixes_2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: Revert "soundwire: stream: fix programming slave ports for non-continous port maps"
dma-buf/heaps:
- fix off by one in CMA heap fault handler
syncobj:
- fix syncobj leak in drm_syncobj_eventfd_ioctl
amdgpu:
- Avoid races between set_drr() functions and dc_state_destruct()
- Fix regerssion related to zpos
- Fix regression related to overlay cursor
- SMU 14.x updates
- JPEG fixes
- Silence an UBSAN warning
amdkfd:
- Fetch cacheline size from IP discovery
i915:
- Prevent a possible int overflow in wq offsets
xe:
- Remove a double include
- Fix null checks and UAF
- Fix access_ok check in user_fence_create
- Fix compat IS_DISPLAY_STEP() range
- OA fix
- Fixes in show_meminfo
nouveau:
- fix GP10x regression on boot
stm:
- add COMMON_CLK dep
rockchip:
- iommu api change
tegra:
- iommu api change
-----BEGIN PGP SIGNATURE-----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=YpZO
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-09-13' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular fixes pull, the amdgpu JPEG engine fixes are probably the
biggest, they look to block some register accessing, otherwise there
are just minor fixes and regression fixes all over.
nouveau had a regression report going back a few kernels that finally
got fixed, Not entirely happy with so many changes so late, but they
all seem quite benign apart from the jpeg one.
dma-buf/heaps:
- fix off by one in CMA heap fault handler
syncobj:
- fix syncobj leak in drm_syncobj_eventfd_ioctl
amdgpu:
- Avoid races between set_drr() functions and dc_state_destruct()
- Fix regerssion related to zpos
- Fix regression related to overlay cursor
- SMU 14.x updates
- JPEG fixes
- Silence an UBSAN warning
amdkfd:
- Fetch cacheline size from IP discovery
i915:
- Prevent a possible int overflow in wq offsets
xe:
- Remove a double include
- Fix null checks and UAF
- Fix access_ok check in user_fence_create
- Fix compat IS_DISPLAY_STEP() range
- OA fix
- Fixes in show_meminfo
nouveau:
- fix GP10x regression on boot
stm:
- add COMMON_CLK dep
rockchip:
- iommu api change
tegra:
- iommu api change"
* tag 'drm-fixes-2024-09-13' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
drm/amd/display: Do not reset planes based on crtc zpos_changed
drm/amd/display: Avoid race between dcn35_set_drr() and dc_state_destruct()
drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct()
drm/amdkfd: Add cache line size info
drm/tegra: Use iommu_paging_domain_alloc()
drm/rockchip: Use iommu_paging_domain_alloc()
...
_regulator_get() contains a lot of common code doing checks prior to the
regulator lookup and housekeeping work after the lookup. Almost all the
code could be shared with a OF-specific variant of _regulator_get().
Split out the common parts so that they can be reused. The OF-specific
version of _regulator_get() will be added in a subsequent patch.
No functional changes were made.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240911072751.365361-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add calibration related kcontrol for speaker impedance calibration and
speaker leakage check for Chromebook.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240911232739.1509-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series moves common Soundwire endpoint parsing and dai
creation logic to common placeholder from Intel generic SoundWire
machine driver code to make it generic. AMD SoundWire machine driver
code is refactored to use these functions for SoundWire endpoint
parsing and dai creation logic.
Link: https://github.com/thesofproject/linux/pull/5171
Another device has been reported to be unreliable if we have more than
one outstanding command. In this new case, data corruption may occur.
Since we have two devices now needing this quirky behavior, make a
generic quirk flag.
The same Apple quirk is clearly not "temporary", so update the comment
while moving it.
Link: https://lore.kernel.org/linux-nvme/191d810a4e3.fcc6066c765804.973611676137075390@collabora.com/
Reported-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Christoph Hellwig hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Move SoundWire endpoint parsing helper functions to common place holder.
These functions will be used by other platform machine driver code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move Soundwire endpoint and dai link structures from Intel generic machine
driver code to common place holder(soc_sdw_utils.h). These structures will
be used in other platform SoundWire machine driver code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename SoundWire parsing helper functions with 'asoc_sdw' tag
to make it generic.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename SoundWire endpoint and dai link structures with asoc tag to make it
generic.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new cmpxchg_emu_u8() to emulate one-byte cmpxchg() on xtensa.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Drop two-byte support per Arnd Bergmann feedback. ]
[ Apply Geert Uytterhoeven feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Use the new cmpxchg_emu_u8() to emulate one-byte cmpxchg() on sh.
[ paulmck: Drop two-byte support per Arnd Bergmann feedback. ]
[ paulmck: Apply feedback from Naresh Kamboju. ]
[ Apply Geert Uytterhoeven feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-sh@vger.kernel.org>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Avoid removing these controls, as doing so can cause issues if the stream
is initiated from another control. Ensure these controls remain intact when
the stream is started or finished. Instead of removing them, return an
-EBUSY error code to indicate that the controller is busy, especially when
the audio filter and the SINC filter are in use.
[andrei.simion@microchip.com: Reword the commit title and the commit
message. Replace spinlock and busy variable with atomic_t busy_stream.]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20240913120621.79088-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some comments here are referring to a non-existent
regulator_ops::get_voltage_vsel() where ::get_voltage_sel() is meant,
and similar for ::set_voltage_vsel() / ::set_voltage_sel().
Update the comments.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20240913-regulator-typos-v1-1-92781c93f638@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use irq_get_trigger_type() to replace irq_get_irq_data() and then
irqd_get_trigger_type(), if the irq data is NULL it will return 0.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240913013503.3754712-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case vmmc or vqmmc regulator is not available yet, use dev_err_probe
in order to set a deferred probe reason. This is a helpful hint in
/sys/kernel/debug/devices_deferred
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240911090910.3060749-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 9094e53ff5 ("pmdomain: core: Use dev_name() instead of
kobject_get_path() in debugfs") severely shortened the names of devices
in a PM Domain. Now the most common format[1] consists of a 32-bit
unit-address (8 characters), followed by a dot and a node name (20
characters for "air-pollution-sensor" and "interrupt-controller", which
are the longest generic node names documented in the Devicetree
Specification), for a typical maximum of 29 characters.
This offers a good opportunity to reduce the table width of the debug
summary:
- Reduce the device name field width from 50 to 30 characters, which
matches the PM Domain name width,
- Reduce the large inter-column space between the "performance" and
"managed by" columns.
Visual impact:
- The "performance" column now starts at a position that is a
multiple of 16, just like the "status" and "children" columns,
- All of the "/device", "runtime status", and "managed by" columns are
now indented 4 characters more than the columns right above them,
- Everything fits in (one less than) 80 characters again ;-)
[1] Note that some device names (e.g. TI AM335x interconnect target
modules) do not follow this convention, and may be much longer, but
these didn't fit in the old 50-character column width either.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f8e1821364b6d5d11350447c128f6d2b470f33fe.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Move mode_status_str() below perf_status_str(), to make declaration
order match calling order of the various *_status_str() helpers.
While at it, add a blank line for consistency among the three helpers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/18ed6fb2bb92860f3af1bc7e5e4a01e9dacf2126.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The "performance" column contains variable-width values. Hence when
their printed values contain more than one digit, all values in
successive columns become misaligned.
Fix this by formatting it as a fixed-width field. Adjust successive
spaces and field widths to retain the exiting layout.
Fixes: 0155aaf95a ("PM: domains: Add the domain HW-managed mode to the summary")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e004f9d2a75e9a49c269507bb8a4514001751e85.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The inter-column space in the debug summary is two spaces. However, in
one case, the extra space is handled implicitly in a field width
specifier. Make inter-column space explicit to ease future maintenance.
Fixes: 45fbc464b0 ("PM: domains: Add "performance" column to debug summary")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ae61eb363621b981edde878e1e74d701702a579f.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The size of the mux stride was off by one, which could result in
invalid pin configuration on the device side or invalid state
readings on the software side.
While on it also update the code and:
- Increase the mux stride size to 16
- Align the virtual muxed regmap range to 16
- Start the regmap window at the selector
- Mark reserved registers as not-readable
Fixes: 8670de9fae ("pinctrl: cy8c95x0: Use regmap ranges")
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reported-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/20240902072859.583490-1-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
