Interrupt status read seems to be broken on some old MPU-6050 like
chips. Fix by reverting to previous driver behavior bypassing interrupt
status read. This is working because these chips are not supporting
WoM and data ready is the only interrupt source.
Fixes: 5537f653d9 ("iio: imu: inv_mpu6050: add new interrupt handler for WoM events")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # LG P880
Link: https://patch.msgid.link/20240814143735.327302-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Models AD4114/5/6 have .higher_gpio_bits = true. This is not correct as
the only models that have the GPIO bits to a higher position are AD4111/2.
Fix by removing the higher_gpio_bits = true from the AD4114/5/6 models.
Fixes: 13d12e3ad1 ("iio: adc: ad7173: Add support for AD411x devices")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Link: https://patch.msgid.link/20240809134909.26829-1-dumitru.ceclan@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The cfg pointer is set before reading the channel number that the
configuration should point to. This causes configurations to be shifted
by one channel.
For example setting bipolar to the first channel defined in the DT will
cause bipolar mode to be active on the second defined channel.
Fix by moving the cfg pointer setting after reading the channel number.
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240806085133.114547-1-dumitru.ceclan@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
With commit 7b0c9f8fa3 ("iio: adc: ad_sigma_delta: Add optional irq
selection"), we can get the irq line from struct ad_sigma_delta_info
instead of the spi device. However, in devm_ad_sd_probe_trigger(), when
getting the irq_flags with irq_get_trigger_type() we are still using
the spi device irq instead of the one used for devm_request_irq().
Fixes: 7b0c9f8fa3 ("iio: adc: ad_sigma_delta: Add optional irq selection")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240806-dev-fix-ad-sigma-delta-v1-1-aa25b173c063@analog.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove IRQF_TRIGGER_FALLING flag from irq request, this should come from
the platform firmware and should not be hard-coded into the driver.
Add IRQF_ONESHOT flag to the irq request, the interrupt should not be
re-activated in interrupt context, it should be done only after the
device irq handler run.
Fixes: a9306887eb ("iio: adc: ti-ads1119: Add driver")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviwed-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20240731140657.88265-1-francesco@dolcini.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When the scale_type is IIO_VAL_INT_PLUS_MICRO or IIO_VAL_INT_PLUS_NANO
the scale passed as argument is only applied to the fractional part of
the value. Fix it by also multiplying the integer part by the scale
provided.
Fixes: 48e44ce0f8 ("iio:inkern: Add function to read the processed value")
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240730-iio-fix-scale-v1-1-6246638c8daa@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7124_find_similar_live_cfg() computes the compare size by
substracting the address of the cfg struct from the address of the live
field. Because the live field is the first field in the struct, the
result is 0.
Also, the memcmp() call is made from the start of the cfg struct, which
includes the live and cfg_slot fields, which are not relevant for the
comparison.
Fix by grouping the relevant fields with struct_group() and use the
size of the group to compute the compare size; make the memcmp() call
from the address of the group.
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-2-46a76aa4b9be@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7124_soft_reset() function has the assumption that the chip will
assert the "power-on reset" bit in the STATUS register after a software
reset without any delay. The POR bit =0 is used to check if the chip
initialization is done.
A chip ID mismatch probe error appears intermittently when the probe
continues too soon and the ID register does not contain the expected
value.
Fix by adding a 200us delay after the software reset command is issued.
Fixes: b3af341bbd ("iio: adc: Add ad7124 support")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-1-46a76aa4b9be@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Wrong compatible strings are used for AD411x devices.
Fix by adding the missing "adi," prefix.
Fixes: 13d12e3ad1 ("iio: adc: ad7173: Add support for AD411x devices")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240723111322.324947-1-dumitru.ceclan@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If dma_get_slave_caps() fails, we need to release the dma channel before
returning an error to avoid leaking the channel.
Fixes: 2d6ca60f32 ("iio: Add a DMAengine framework based buffer")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240723-iio-fix-dmaengine-free-on-error-v1-1-2c7cbc9b92ff@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current implementation attempts to recover from an eventual glitch
in the clock by checking frstdata state after reading the first
channel's sample: If frstdata is low, it will reset the chip and
return -EIO.
This will only work in parallel mode, where frstdata pin is set low
after the 2nd sample read starts.
For the serial mode, according to the datasheet, "The FRSTDATA output
returns to a logic low following the 16th SCLK falling edge.", thus
after the Xth pulse, X being the number of bits in a sample, the check
will always be true, and the driver will not work at all in serial
mode if frstdata(optional) is defined in the devicetree as it will
reset the chip, and return -EIO every time read_sample is called.
Hence, this check must be removed for serial mode.
Fixes: b9618c0cac ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240702-cleanup-ad7606-v3-1-18d5ea18770e@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.
Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:
struct property *prop;
const __be32 *p;
u32 val;
of_property_for_each_u32(np, "xyz", prop, p, val) { ... }
to this:
u32 val;
of_property_for_each_u32(np, "xyz", val) { ... }
However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.
Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:
- drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
- drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
checks had to be replicated in a different way, making code more verbose
and somewhat uglier, but I refrained from a full rework to keep as much
of the original code untouched having no hardware to test my changes
All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.
Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
have been in linux-next for a while with no reported issues. The
Kconfig fixup went in 29 hours ago, so might have missed the latest
linux-next, but was acked by everyone involved.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
1LpTASaU6A8pN81Z1m5g
=6U1z
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
-----BEGIN PGP SIGNATURE-----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=+9tp
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.11
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
* tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits)
iio: adc: ad7173: Fix uninitialized symbol is_current_chan
iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
math.h: Add unsigned 8 bits fractional numbers type
dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
iio: common: scmi_iio: convert to dev_err_probe()
iio: backend: make use of dev_err_cast_probe()
iio: temperature: ltc2983: convert to dev_err_probe()
dev_printk: add new dev_err_probe() helpers
iio: xilinx-ams: Add labels
iio: adc: ad7944: use devm_spi_optimize_message()
Documentation: iio: Document high-speed DMABUF based API
iio: buffer-dmaengine: Support new DMABUF based userspace API
iio: buffer-dma: Enable support for DMABUFs
iio: core: Add new DMABUF interface infrastructure
MAINTAINERS: Update AD7192 driver maintainer
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
MAINTAINERS: Add AVAGO APDS9306
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
...
Move the definition down and make it a boolean that is initialized
to false.
Fixes: 13d12e3ad1 ("iio: adc: ad7173: Add support for AD411x devices")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202406232046.DKfBJq6o-lkp@intel.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a driver to support reading the Auxiliary ADC IP found in the
MediaTek MT6357, MT6358 and MT6359 Power Management ICs, featuring
a different register layout, configuration reset and ADC reading
sequence from the other already supported MediaTek SoC or PMIC
(aux)ADC HW.
This driver provides multiple ADC channels for system monitoring,
such as battery voltage, PMIC temperature, PMIC-internal voltage
regulators temperature, and others.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20240604123008.327424-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use dev_err_probe() (and variants) in the probe() path. While at it, made
some simple improvements:
* Explicitly included the err.h and errno.h headers;
* Removed some unnecessary line breaks;
* Removed a redundant 'else';
* Added some missing \n to prink.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240606-dev-add_dev_errp_probe-v3-2-51bb229edd79@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Label all the channels using names from the reference manual. Some of
the "control" channels are duplicates of other channels. The reference
manual describes it like:
> The AMS register set includes several measurement registers that are
> written to by the PS SYSMON unit using the single-channel mode
> (sequencer off). These voltage measurements are performed using the
> unipolar sampling circuit with a 0 to 3V range and do not have alarms
> or minimum/maximum registers.
So I think these really are measuring the same voltages but in a
different location. In which case, sharing labels makes sense to me.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240620204842.817237-1-sean.anderson@linux.dev
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the functions provided by the buffer-dma core to implement the
DMABUF userspace API in the buffer-dmaengine IIO buffer implementation.
Since we want to be able to transfer an arbitrary number of bytes and
not necesarily the full DMABUF, the associated scatterlist is converted
to an array of DMA addresses + lengths, which is then passed to
dmaengine_prep_slave_dma_array().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Co-developed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240620122726.41232-6-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Implement iio_dma_buffer_attach_dmabuf(), iio_dma_buffer_detach_dmabuf()
and iio_dma_buffer_transfer_dmabuf(), which can then be used by the IIO
DMA buffer implementations.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Co-developed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240620122726.41232-5-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add the necessary infrastructure to the IIO core to support a new
optional DMABUF based interface.
With this new interface, DMABUF objects (externally created) can be
attached to a IIO buffer, and subsequently used for data transfer.
A userspace application can then use this interface to share DMABUF
objects between several interfaces, allowing it to transfer data in a
zero-copy fashion, for instance between IIO and the USB stack.
The userspace application can also memory-map the DMABUF objects, and
access the sample data directly. The advantage of doing this vs. the
read() interface is that it avoids an extra copy of the data between the
kernel and userspace. This is particularly userful for high-speed
devices which produce several megabytes or even gigabytes of data per
second.
As part of the interface, 3 new IOCTLs have been added:
IIO_BUFFER_DMABUF_ATTACH_IOCTL(int fd):
Attach the DMABUF object identified by the given file descriptor to the
buffer.
IIO_BUFFER_DMABUF_DETACH_IOCTL(int fd):
Detach the DMABUF object identified by the given file descriptor from
the buffer. Note that closing the IIO buffer's file descriptor will
automatically detach all previously attached DMABUF objects.
IIO_BUFFER_DMABUF_ENQUEUE_IOCTL(struct iio_dmabuf *):
Request a data transfer to/from the given DMABUF object. Its file
descriptor, as well as the transfer size and flags are provided in the
"iio_dmabuf" structure.
These three IOCTLs have to be performed on the IIO buffer's file
descriptor, obtained using the IIO_BUFFER_GET_FD_IOCTL() ioctl.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Co-developed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240620122726.41232-4-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This makes use of the new devm_regulator_get_enable_read_voltage()
function to reduce boilerplate code.
Error messages have changed slightly since there are now fewer places
where we print an error. The rest of the logic of selecting which
supply to use as the reference voltage remains the same.
Also 1000 is replaced by MILLI in a few places for consistency.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240624124941.113010-2-alisa.roman@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Hard matching against the WhoAmI values isn't ideal for using devices
which are compatible with existing ones. Instead of raising an error,
issue a warning instead, thus allowing the driver to continue probing.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://patch.msgid.link/20240625082800.62305-1-kauschluss@disroot.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The return value of 'iio_gts_find_int_time_by_sel()' is assigned to
variable 'intg_old' but value of 'ret' is checked for error. Update to
use 'intg_old' for error checking.
Fixes: 620d1e6c7a ("iio: light: Add support for APDS9306 Light Sensor")
Signed-off-by: Mudit Sharma <muditsharma.info@gmail.com>
Reviewed-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://patch.msgid.link/20240625210203.522179-1-muditsharma.info@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It can be convenient for other in-kernel drivers to reuse IIO channel
labels. Export the iio_read_channel_label function to allow this. The
signature is different depending on where we are calling it from, so
the meat is moved to do_iio_read_channel_label.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20240624174601.1527244-2-sean.anderson@linux.dev
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use devm_regulator_get_enable_read_voltage() to simplify the code.
Error message is slightly changed since there is only one error return
now.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240621-iio-regulator-refactor-round-2-v1-10-49e50cd0b99a@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
By using a few devm_ functions, we can simplify the driver and remove
the ads8688_remove() function.
spi_set_drvdata() is removed since there are no more callers of
spi_get_drvdata().
Also use dev_err_probe() to simplify error return.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240621-iio-regulator-refactor-round-2-v1-9-49e50cd0b99a@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use devm_regulator_get_enable_read_voltage() to simplify the code.
Error message is changed since there is only one error return now.
LTC2309_INTERNAL_REF_MV macro is added to make the internal reference
voltage value self-documenting.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240621-iio-regulator-refactor-round-2-v1-5-49e50cd0b99a@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
By using a few more devm_ functions, we can remove the hx711_remove()
function in the hx711 driver.
platform_set_drvdata() is also removed since there are no more
callers of platform_get_drvdata().
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andreas Klinger <ak@it-klinger.de>
Link: https://patch.msgid.link/20240621-iio-regulator-refactor-round-2-v1-3-49e50cd0b99a@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This makes use of the devm_regulator_get_enable_read_voltage() helper
function to simplify the code.
The error return is moved closer to the function call to make it easier
to follow the logic. And a few blank lines are added for readability.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://patch.msgid.link/20240621-iio-regulator-refactor-round-2-v1-1-49e50cd0b99a@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the new auto cleanup based locks so error paths are simpler.
While at it, removed 'ret' from adis16400_write_raw() by doing
return adis_write_reg_16();
instead of
ret = adis_write_reg_16();
return ret;
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240618-dev-iio-adis-cleanup-v1-6-bd93ce7845c7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use the new auto cleanup based locks so error paths are simpler.
While at it, reduce a bit the scope of the lock as we did not needed it
protecting all the data in the switch() branch.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240618-dev-iio-adis-cleanup-v1-5-bd93ce7845c7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Split trigger handling for devices that have paging and need to
select the correct page to get the data. Although this actually
introduces more LOC, it makes the code and the locking clear. It will
also make the following move to the cleanup magic cleaner.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240618-dev-iio-adis-cleanup-v1-1-bd93ce7845c7@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add clk provider feature for the adf4350.
Even though the driver was sent as an IIO driver in most cases the
device is actually seen as a clock provider.
This patch aims to cover actual usecases requested by users in order to
completely control the output frequencies from userspace.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240621121403.47912-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADS1119 is a precision, 16-bit, analog-to-digital converter (ADC)
that features two differential or four single-ended inputs through a
flexible input multiplexer (MUX), rail-to-rail input
buffers, a programmable gain stage, a voltage reference, and an
oscillator.
Apart from normal single conversion, the driver also supports
continuous conversion mode using a triggered buffer. However, in this
mode only one channel can be scanned at a time.
Datasheet: https://www.ti.com/lit/gpn/ads1119
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20240617183905.4685-1-francesco@dolcini.it
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
