* Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
* Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
* Disagregation of the vcpu flags in separate sets to better track
their use model.
* A fix for the GICv2-on-v3 selftest
* A small set of cosmetic fixes
RISC-V:
* Track ISA extensions used by Guest using bitmap
* Added system instruction emulation framework
* Added CSR emulation framework
* Added gfp_custom flag in struct kvm_mmu_memory_cache
* Added G-stage ioremap() and iounmap() functions
* Added support for Svpbmt inside Guest
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
x86:
* Permit guests to ignore single-bit ECC errors
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Use try_cmpxchg64 instead of cmpxchg64
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* Allow NX huge page mitigation to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
* Miscellaneous cleanups:
** MCE MSR emulation
** Use separate namespaces for guest PTEs and shadow PTEs bitmasks
** PIO emulation
** Reorganize rmap API, mostly around rmap destruction
** Do not workaround very old KVM bugs for L0 that runs with nesting enabled
** new selftests API for CPUID
Generic:
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmLnyo4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMtQQf/XjVWiRcWLPR9dqzRM/vvRXpiG+UL
jU93R7m6ma99aqTtrxV/AE+kHgamBlma3Cwo+AcWk9uCVNbIhFjv2YKg6HptKU0e
oJT3zRYp+XIjEo7Kfw+TwroZbTlG6gN83l1oBLFMqiFmHsMLnXSI2mm8MXyi3dNB
vR2uIcTAl58KIprqNNsYJ2dNn74ogOMiXYx9XzoA9/5Xb6c0h4rreHJa5t+0s9RO
Gz7Io3PxumgsbJngjyL1Ve5oxhlIAcZA8DU0PQmjxo3eS+k6BcmavGFd45gNL5zg
iLpCh4k86spmzh8CWkAAwWPQE4dZknK6jTctJc0OFVad3Z7+X7n0E8TFrA==
=PM8o
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Quite a large pull request due to a selftest API overhaul and some
patches that had come in too late for 5.19.
ARM:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete rewrite
of the vgic-v3 view to allign with the rest of the infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
RISC-V:
- Track ISA extensions used by Guest using bitmap
- Added system instruction emulation framework
- Added CSR emulation framework
- Added gfp_custom flag in struct kvm_mmu_memory_cache
- Added G-stage ioremap() and iounmap() functions
- Added support for Svpbmt inside Guest
s390:
- add an interface to provide a hypervisor dump for secure guests
- improve selftests to use TAP interface
- enable interpretive execution of zPCI instructions (for PCI
passthrough)
- First part of deferred teardown
- CPU Topology
- PV attestation
- Minor fixes
x86:
- Permit guests to ignore single-bit ECC errors
- Intel IPI virtualization
- Allow getting/setting pending triple fault with
KVM_GET/SET_VCPU_EVENTS
- PEBS virtualization
- Simplify PMU emulation by just using PERF_TYPE_RAW events
- More accurate event reinjection on SVM (avoid retrying
instructions)
- Allow getting/setting the state of the speaker port data bit
- Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
are inconsistent
- "Notify" VM exit (detect microarchitectural hangs) for Intel
- Use try_cmpxchg64 instead of cmpxchg64
- Ignore benign host accesses to PMU MSRs when PMU is disabled
- Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
- Allow NX huge page mitigation to be disabled on a per-vm basis
- Port eager page splitting to shadow MMU as well
- Enable CMCI capability by default and handle injected UCNA errors
- Expose pid of vcpu threads in debugfs
- x2AVIC support for AMD
- cleanup PIO emulation
- Fixes for LLDT/LTR emulation
- Don't require refcounted "struct page" to create huge SPTEs
- Miscellaneous cleanups:
- MCE MSR emulation
- Use separate namespaces for guest PTEs and shadow PTEs bitmasks
- PIO emulation
- Reorganize rmap API, mostly around rmap destruction
- Do not workaround very old KVM bugs for L0 that runs with nesting enabled
- new selftests API for CPUID
Generic:
- Fix races in gfn->pfn cache refresh; do not pin pages tracked by
the cache
- new selftests API using struct kvm_vcpu instead of a (vm, id)
tuple"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
selftests: kvm: set rax before vmcall
selftests: KVM: Add exponent check for boolean stats
selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
selftests: KVM: Check stat name before other fields
KVM: x86/mmu: remove unused variable
RISC-V: KVM: Add support for Svpbmt inside Guest/VM
RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
RISC-V: KVM: Add extensible CSR emulation framework
RISC-V: KVM: Add extensible system instruction emulation framework
RISC-V: KVM: Factor-out instruction emulation into separate sources
RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
RISC-V: KVM: Fix variable spelling mistake
RISC-V: KVM: Improve ISA extension by using a bitmap
KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
KVM: x86: Do not block APIC write for non ICR registers
...
One of the goals is to reduce the overhead of using ->read_iter()
and ->write_iter() instead of ->read()/->write(); new_sync_{read,write}()
has a surprising amount of overhead, in particular inside iocb_flags().
That's why the beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYurGOQAKCRBZ7Krx/gZQ
6ysyAP91lvBfMRepcxpd9kvtuzWkU8A3rfSziZZteEHANB9Q7QEAiPn2a2OjWkcZ
uAyUWfCkHCNx+dSMkEvUgR5okQ0exAM=
=9UCV
-----END PGP SIGNATURE-----
Merge tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs iov_iter updates from Al Viro:
"Part 1 - isolated cleanups and optimizations.
One of the goals is to reduce the overhead of using ->read_iter() and
->write_iter() instead of ->read()/->write().
new_sync_{read,write}() has a surprising amount of overhead, in
particular inside iocb_flags(). That's the explanation for the
beginning of the series is in this pile; it's not directly
iov_iter-related, but it's a part of the same work..."
* tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
first_iovec_segment(): just return address
iov_iter: massage calling conventions for first_{iovec,bvec}_segment()
iov_iter: first_{iovec,bvec}_segment() - simplify a bit
iov_iter: lift dealing with maxpages out of first_{iovec,bvec}_segment()
iov_iter_get_pages{,_alloc}(): cap the maxsize with MAX_RW_COUNT
iov_iter_bvec_advance(): don't bother with bvec_iter
copy_page_{to,from}_iter(): switch iovec variants to generic
keep iocb_flags() result cached in struct file
iocb: delay evaluation of IS_SYNC(...) until we want to check IOCB_DSYNC
struct file: use anonymous union member for rcuhead and llist
btrfs: use IOMAP_DIO_NOSYNC
teach iomap_dio_rw() to suppress dsync
No need of likely/unlikely on calls of check_copy_size()
Hi Linus,
Please, pull the following treewide patch that replaces zero-length arrays
with flexible-array members in UAPI. This patch has been baking in
linux-next for 5 weeks now.
-fstrict-flex-arrays=3 is coming and we need to land these changes
to prevent issues like these in the short future:
../fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0,
but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly zero. If
this breaks anything, we can use a union with a new member name.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=8yMq
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-transformations-UAPI-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull uapi flexible array update from Gustavo Silva:
"A treewide patch that replaces zero-length arrays with flexible-array
members in UAPI. This has been baking in linux-next for 5 weeks now.
'-fstrict-flex-arrays=3' is coming and we need to land these changes
to prevent issues like these in the short future:
fs/minix/dir.c:337:3: warning: 'strcpy' will always overflow; destination buffer has size 0, but the source string has length 2 (including NUL byte) [-Wfortify-source]
strcpy(de3->name, ".");
^
Since these are all [0] to [] changes, the risk to UAPI is nearly
zero. If this breaks anything, we can use a union with a new member
name"
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
* tag 'flexible-array-transformations-UAPI-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: uapi: Replace zero-length arrays with flexible-array members
-----BEGIN PGP SIGNATURE-----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=Zy3d
-----END PGP SIGNATURE-----
Merge tag 'random-6.0-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Though there's been a decent amount of RNG-related development during
this last cycle, not all of it is coming through this tree, as this
cycle saw a shift toward tackling early boot time seeding issues,
which took place in other trees as well.
Here's a summary of the various patches:
- The CONFIG_ARCH_RANDOM .config option and the "nordrand" boot
option have been removed, as they overlapped with the more widely
supported and more sensible options, CONFIG_RANDOM_TRUST_CPU and
"random.trust_cpu". This change allowed simplifying a bit of arch
code.
- x86's RDRAND boot time test has been made a bit more robust, with
RDRAND disabled if it's clearly producing bogus results. This would
be a tip.git commit, technically, but I took it through random.git
to avoid a large merge conflict.
- The RNG has long since mixed in a timestamp very early in boot, on
the premise that a computer that does the same things, but does so
starting at different points in wall time, could be made to still
produce a different RNG state. Unfortunately, the clock isn't set
early in boot on all systems, so now we mix in that timestamp when
the time is actually set.
- User Mode Linux now uses the host OS's getrandom() syscall to
generate a bootloader RNG seed and later on treats getrandom() as
the platform's RDRAND-like faculty.
- The arch_get_random_{seed_,}_long() family of functions is now
arch_get_random_{seed_,}_longs(), which enables certain platforms,
such as s390, to exploit considerable performance advantages from
requesting multiple CPU random numbers at once, while at the same
time compiling down to the same code as before on platforms like
x86.
- A small cleanup changing a cmpxchg() into a try_cmpxchg(), from
Uros.
- A comment spelling fix"
More info about other random number changes that come in through various
architecture trees in the full commentary in the pull request:
https://lore.kernel.org/all/20220731232428.2219258-1-Jason@zx2c4.com/
* tag 'random-6.0-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: correct spelling of "overwrites"
random: handle archrandom with multiple longs
um: seed rng using host OS rng
random: use try_cmpxchg in _credit_init_bits
timekeeping: contribute wall clock to rng on time change
x86/rdrand: Remove "nordrand" flag in favor of "random.trust_cpu"
random: remove CONFIG_ARCH_RANDOM
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYulqTBQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5SBBAP9nbAW1SPa/hDqbrclHdDrS59VkSVwv
6ZO2yAmxJAptHwD+JzyJpJiZsqVN/Tu85V1PqeAt9c8az8f3CfDBp2+w7AA=
=Ad+c
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Aside from the one EVM cleanup patch, all the other changes are kexec
related.
On different architectures different keyrings are used to verify the
kexec'ed kernel image signature. Here are a number of preparatory
cleanup patches and the patches themselves for making the keyrings -
builtin_trusted_keyring, .machine, .secondary_trusted_keyring, and
.platform - consistent across the different architectures"
* tag 'integrity-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
kexec, KEYS, s390: Make use of built-in and secondary keyring for signature verification
arm64: kexec_file: use more system keyrings to verify kernel image signature
kexec, KEYS: make the code in bzImage64_verify_sig generic
kexec: clean up arch_kexec_kernel_verify_sig
kexec: drop weak attribute from functions
kexec_file: drop weak attribute from functions
evm: Use IS_ENABLED to initialize .enabled
- lockdep: Fix a handful of the more complex lockdep_init_map_*() primitives
that can lose the lock_type & cause false reports. No such mishap was
observed in the wild.
- jump_label improvements: simplify the cross-arch support of
initial NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmLn3jERHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hzeg/7BTC90XeMANhTiL23iiH7dOYZwqdFeB12
VBqdaPaGC8i+mJzVAdGyPFwCFDww6Ak6P33PcHkemuIO5+DhWis8hfw5krHEOO1k
AyVSMOZuWJ8/g6ZenjgNFozQ8C+3NqURrpdqN55d7jhMazPWbsNLLqUgvSSqo6DY
Ah2O+EKrDfGNCxT6/YaTAmUryctotxafSyFDQxv3RKPfCoIIVv9b3WApYqTOqFIu
VYTPr+aAcMsU20hPMWQI4kbQaoCxFqr3bZiZtAiS/IEunqi+PlLuWjrnCUpLwVTC
+jOCkNJHt682FPKTWelUnCnkOg9KhHRujRst5mi1+2tWAOEvKltxfe05UpsZYC3b
jhzddREMwBt3iYsRn65LxxsN4AMK/C/41zjejHjZpf+Q5kwDsc6Ag3L5VifRFURS
KRwAy9ejoVYwnL7CaVHM2zZtOk4YNxPeXmiwoMJmOufpdmD1LoYbNUbpSDf+goIZ
yPJpxFI5UN8gi8IRo3DMe4K2nqcFBC3wFn8tNSAu+44gqDwGJAJL6MsLpkLSZkk8
3QN9O11UCRTJDkURjoEWPgRRuIu9HZ4GKNhiblDy6gNM/jDE/m5OG4OYfiMhojgc
KlMhsPzypSpeApL55lvZ+AzxH8mtwuUGwm8lnIdZ2kIse1iMwapxdWXWq9wQr8eW
jLWHgyZ6rcg=
=4B89
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"This was a fairly quiet cycle for the locking subsystem:
- lockdep: Fix a handful of the more complex lockdep_init_map_*()
primitives that can lose the lock_type & cause false reports. No
such mishap was observed in the wild.
- jump_label improvements: simplify the cross-arch support of initial
NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous"
* tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix lockdep_init_map_*() confusion
jump_label: make initial NOP patching the special case
jump_label: mips: move module NOP patching into arch code
jump_label: s390: avoid pointless initial NOP patching
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
- Prevent relatively slow PRNO TRNG random number operation
from being called from interrupt context. That could for
example cause some network loads to timeout.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCYt/ishccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8DbGAP9O4BV4hAtjiOG+l3WSKprzwNKZ
EpOmd8ivJyvox3GAMAEAziwGuBogmIhXsyiz7wrMUGaFpBkST3yVI7WMV4qaMAU=
=mAUq
-----END PGP SIGNATURE-----
Merge tag 's390-5.19-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fix from Alexander GordeevL
- Prevent relatively slow PRNO TRNG random number operation from being
called from interrupt context. That could for example cause some
network loads to timeout.
* tag 's390-5.19-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/archrandom: prevent CPACF trng invocations in interrupt context
The archrandom interface was originally designed for x86, which supplies
RDRAND/RDSEED for receiving random words into registers, resulting in
one function to generate an int and another to generate a long. However,
other architectures don't follow this.
On arm64, the SMCCC TRNG interface can return between one and three
longs. On s390, the CPACF TRNG interface can return arbitrary amounts,
with four longs having the same cost as one. On UML, the os_getrandom()
interface can return arbitrary amounts.
So change the api signature to take a "max_longs" parameter designating
the maximum number of longs requested, and then return the number of
longs generated.
Since callers need to check this return value and loop anyway, each arch
implementation does not bother implementing its own loop to try again to
fill the maximum number of longs. Additionally, all existing callers
pass in a constant max_longs parameter. Taken together, these two things
mean that the codegen doesn't really change much for one-word-at-a-time
platforms, while performance is greatly improved on platforms such as
s390.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This patch slightly reworks the s390 arch_get_random_seed_{int,long}
implementation: Make sure the CPACF trng instruction is never
called in any interrupt context. This is done by adding an
additional condition in_task().
Justification:
There are some constrains to satisfy for the invocation of the
arch_get_random_seed_{int,long}() functions:
- They should provide good random data during kernel initialization.
- They should not be called in interrupt context as the TRNG
instruction is relatively heavy weight and may for example
make some network loads cause to timeout and buck.
However, it was not clear what kind of interrupt context is exactly
encountered during kernel init or network traffic eventually calling
arch_get_random_seed_long().
After some days of investigations it is clear that the s390
start_kernel function is not running in any interrupt context and
so the trng is called:
Jul 11 18:33:39 t35lp54 kernel: [<00000001064e90ca>] arch_get_random_seed_long.part.0+0x32/0x70
Jul 11 18:33:39 t35lp54 kernel: [<000000010715f246>] random_init+0xf6/0x238
Jul 11 18:33:39 t35lp54 kernel: [<000000010712545c>] start_kernel+0x4a4/0x628
Jul 11 18:33:39 t35lp54 kernel: [<000000010590402a>] startup_continue+0x2a/0x40
The condition in_task() is true and the CPACF trng provides random data
during kernel startup.
The network traffic however, is more difficult. A typical call stack
looks like this:
Jul 06 17:37:07 t35lp54 kernel: [<000000008b5600fc>] extract_entropy.constprop.0+0x23c/0x240
Jul 06 17:37:07 t35lp54 kernel: [<000000008b560136>] crng_reseed+0x36/0xd8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b5604b8>] crng_make_state+0x78/0x340
Jul 06 17:37:07 t35lp54 kernel: [<000000008b5607e0>] _get_random_bytes+0x60/0xf8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b56108a>] get_random_u32+0xda/0x248
Jul 06 17:37:07 t35lp54 kernel: [<000000008aefe7a8>] kfence_guarded_alloc+0x48/0x4b8
Jul 06 17:37:07 t35lp54 kernel: [<000000008aeff35e>] __kfence_alloc+0x18e/0x1b8
Jul 06 17:37:07 t35lp54 kernel: [<000000008aef7f10>] __kmalloc_node_track_caller+0x368/0x4d8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b611eac>] kmalloc_reserve+0x44/0xa0
Jul 06 17:37:07 t35lp54 kernel: [<000000008b611f98>] __alloc_skb+0x90/0x178
Jul 06 17:37:07 t35lp54 kernel: [<000000008b6120dc>] __napi_alloc_skb+0x5c/0x118
Jul 06 17:37:07 t35lp54 kernel: [<000000008b8f06b4>] qeth_extract_skb+0x13c/0x680
Jul 06 17:37:07 t35lp54 kernel: [<000000008b8f6526>] qeth_poll+0x256/0x3f8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b63d76e>] __napi_poll.constprop.0+0x46/0x2f8
Jul 06 17:37:07 t35lp54 kernel: [<000000008b63dbec>] net_rx_action+0x1cc/0x408
Jul 06 17:37:07 t35lp54 kernel: [<000000008b937302>] __do_softirq+0x132/0x6b0
Jul 06 17:37:07 t35lp54 kernel: [<000000008abf46ce>] __irq_exit_rcu+0x13e/0x170
Jul 06 17:37:07 t35lp54 kernel: [<000000008abf531a>] irq_exit_rcu+0x22/0x50
Jul 06 17:37:07 t35lp54 kernel: [<000000008b922506>] do_io_irq+0xe6/0x198
Jul 06 17:37:07 t35lp54 kernel: [<000000008b935826>] io_int_handler+0xd6/0x110
Jul 06 17:37:07 t35lp54 kernel: [<000000008b9358a6>] psw_idle_exit+0x0/0xa
Jul 06 17:37:07 t35lp54 kernel: ([<000000008ab9c59a>] arch_cpu_idle+0x52/0xe0)
Jul 06 17:37:07 t35lp54 kernel: [<000000008b933cfe>] default_idle_call+0x6e/0xd0
Jul 06 17:37:07 t35lp54 kernel: [<000000008ac59f4e>] do_idle+0xf6/0x1b0
Jul 06 17:37:07 t35lp54 kernel: [<000000008ac5a28e>] cpu_startup_entry+0x36/0x40
Jul 06 17:37:07 t35lp54 kernel: [<000000008abb0d90>] smp_start_secondary+0x148/0x158
Jul 06 17:37:07 t35lp54 kernel: [<000000008b935b9e>] restart_int_handler+0x6e/0x90
which confirms that the call is in softirq context. So in_task() covers exactly
the cases where we want to have CPACF trng called: not in nmi, not in hard irq,
not in soft irq but in normal task context and during kernel init.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Link: https://lore.kernel.org/r/20220713131721.257907-1-freude@linux.ibm.com
Fixes: e4f7440030 ("s390/archrandom: simplify back to earlier design and initialize earlier")
[agordeev@linux.ibm.com changed desc, added Fixes and Link, removed -stable]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Scattered across the archs are 3 basic forms of tlb_{start,end}_vma().
Provide two new MMU_GATHER_knobs to enumerate them and remove the per
arch tlb_{start,end}_vma() implementations.
- MMU_GATHER_NO_FLUSH_CACHE indicates the arch has flush_cache_range()
but does *NOT* want to call it for each VMA.
- MMU_GATHER_MERGE_VMAS indicates the arch wants to merge the
invalidate across multiple VMAs if possible.
With these it is possible to capture the three forms:
1) empty stubs;
select MMU_GATHER_NO_FLUSH_CACHE and MMU_GATHER_MERGE_VMAS
2) start: flush_cache_range(), end: empty;
select MMU_GATHER_MERGE_VMAS
3) start: flush_cache_range(), end: flush_tlb_range();
default
Obviously, if the architecture does not have flush_cache_range() then
it also doesn't need to select MMU_GATHER_NO_FLUSH_CACHE.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During a subsystem reset the Topology-Change-Report is cleared.
Let's give userland the possibility to clear the MTCR in the case
of a subsystem reset.
To migrate the MTCR, we give userland the possibility to
query the MTCR state.
We indicate KVM support for the CPU topology facility with a new
KVM capability: KVM_CAP_S390_CPU_TOPOLOGY.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20220714194334.127812-1-pmorel@linux.ibm.com>
Link: https://lore.kernel.org/all/20220714194334.127812-1-pmorel@linux.ibm.com/
[frankja@linux.ibm.com: Simple conflict resolution in Documentation/virt/kvm/api.rst]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
We report a topology change to the guest for any CPU hotplug.
The reporting to the guest is done using the Multiprocessor
Topology-Change-Report (MTCR) bit of the utility entry in the guest's
SCA which will be cleared during the interpretation of PTF.
On every vCPU creation we set the MCTR bit to let the guest know the
next time it uses the PTF with command 2 instruction that the
topology changed and that it should use the STSI(15.1.x) instruction
to get the topology details.
STSI(15.1.x) gives information on the CPU configuration topology.
Let's accept the interception of STSI with the function code 15 and
let the userland part of the hypervisor handle it when userland
supports the CPU Topology facility.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220714101824.101601-2-pmorel@linux.ibm.com
Message-Id: <20220714101824.101601-2-pmorel@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
We can check if SIIF is enabled by testing the sclp_info struct
instead of testing the sie control block eca variable as that
facility is always enabled if available.
Also let's cleanup all the ipte related struct member accesses
which currently happen by referencing the KVM struct via the
VCPU struct.
Making the KVM struct the parameter to the ipte_* functions
removes one level of indirection which makes the code more readable.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/all/20220711084148.25017-2-pmorel@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
When the SIGP interpretation facility is present and a VCPU sends an
ecall to another VCPU in enabled wait, the sending VCPU receives a 56
intercept (partial execution), so KVM can wake up the receiving CPU.
Note that the SIGP interpretation facility will take care of the
interrupt delivery and KVM's only job is to wake the receiving VCPU.
For PV, the sending VCPU will receive a 108 intercept (pv notify) and
should continue like in the non-PV case, i.e. wake the receiving VCPU.
For PV and non-PV guests the interrupt delivery will occur through the
SIGP interpretation facility on SIE entry when SIE finds the X bit in
the status field set.
However, in handle_pv_notification(), there was no special handling for
SIGP, which leads to interrupt injection being requested by KVM for the
next SIE entry. This results in the interrupt being delivered twice:
once by the SIGP interpretation facility and once by KVM through the
IICTL.
Add the necessary special handling in handle_pv_notification(), similar
to handle_partial_execution(), which simply wakes the receiving VCPU and
leave interrupt delivery to the SIGP interpretation facility.
In contrast to external calls, emergency calls are not interpreted but
also cause a 108 intercept, which is why we still need to call
handle_instruction() for SIGP orders other than ecall.
Since kvm_s390_handle_sigp_pei() is now called for all SIGP orders which
cause a 108 intercept - even if they are actually handled by
handle_instruction() - move the tracepoint in kvm_s390_handle_sigp_pei()
to avoid possibly confusing trace messages.
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 5.7
Fixes: da24a0cc58 ("KVM: s390: protvirt: Instruction emulation")
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220718130434.73302-1-nrb@linux.ibm.com
Message-Id: <20220718130434.73302-1-nrb@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Move the Destroy Secure Configuration UVC before the loop to destroy
the memory. If the protected VM has memory, it will be cleaned up and
made accessible by the Destroy Secure Configuration UVC. The struct
page for the relevant pages will still have the protected bit set, so
the loop is still needed to clean that up.
Switching the order of those two operations does not change the
outcome, but it is significantly faster.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-13-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-13-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Refactor kvm_s390_pv_deinit_vm to improve readability and simplify the
improvements that are coming in subsequent patches.
No functional change intended.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-12-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-12-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Dropped commit message line regarding review]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
When ptep_get_and_clear_full is called for a mm teardown, we will now
attempt to destroy the secure pages. This will be faster than export.
In case it was not a teardown, or if for some reason the destroy page
UVC failed, we try with an export page, like before.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-11-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-11-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add an mmu_notifier for protected VMs. The callback function is
triggered when the mm is torn down, and will attempt to convert all
protected vCPUs to non-protected. This allows the mm teardown to use
the destroy page UVC instead of export.
Also make KVM select CONFIG_MMU_NOTIFIER, needed to use mmu_notifiers.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-10-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-10-imbrenda@linux.ibm.com>
[frankja@linux.ibm.com: Conflict resolution for mmu_notifier.h include
and struct kvm_s390_pv]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
When RDRAND was introduced, there was much discussion on whether it
should be trusted and how the kernel should handle that. Initially, two
mechanisms cropped up, CONFIG_ARCH_RANDOM, a compile time switch, and
"nordrand", a boot-time switch.
Later the thinking evolved. With a properly designed RNG, using RDRAND
values alone won't harm anything, even if the outputs are malicious.
Rather, the issue is whether those values are being *trusted* to be good
or not. And so a new set of options were introduced as the real
ones that people use -- CONFIG_RANDOM_TRUST_CPU and "random.trust_cpu".
With these options, RDRAND is used, but it's not always credited. So in
the worst case, it does nothing, and in the best case, maybe it helps.
Along the way, CONFIG_ARCH_RANDOM's meaning got sort of pulled into the
center and became something certain platforms force-select.
The old options don't really help with much, and it's a bit odd to have
special handling for these instructions when the kernel can deal fine
with the existence or untrusted existence or broken existence or
non-existence of that CPU capability.
Simplify the situation by removing CONFIG_ARCH_RANDOM and using the
ordinary asm-generic fallback pattern instead, keeping the two options
that are actually used. For now it leaves "nordrand" for now, as the
removal of that will take a different route.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
commit e23a8020ce ("s390/kexec_file: Signature verification prototype")
adds support for KEXEC_SIG verification with keys from platform keyring
but the built-in keys and secondary keyring are not used.
Add support for the built-in keys and secondary keyring as x86 does.
Fixes: e23a8020ce ("s390/kexec_file: Signature verification prototype")
Cc: stable@vger.kernel.org
Cc: Philipp Rudo <prudo@linux.ibm.com>
Cc: kexec@lists.infradead.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
As requested
(http://lkml.kernel.org/r/87ee0q7b92.fsf@email.froward.int.ebiederm.org),
this series converts weak functions in kexec to use the #ifdef approach.
Quoting the 3e35142ef9 ("kexec_file: drop weak attribute from
arch_kexec_apply_relocations[_add]") changelog:
: Since commit d1bcae833b32f1 ("ELF: Don't generate unused section symbols")
: [1], binutils (v2.36+) started dropping section symbols that it thought
: were unused. This isn't an issue in general, but with kexec_file.c, gcc
: is placing kexec_arch_apply_relocations[_add] into a separate
: .text.unlikely section and the section symbol ".text.unlikely" is being
: dropped. Due to this, recordmcount is unable to find a non-weak symbol in
: .text.unlikely to generate a relocation record against.
This patch (of 2);
Drop __weak attribute from functions in kexec_file.c:
- arch_kexec_kernel_image_probe()
- arch_kimage_file_post_load_cleanup()
- arch_kexec_kernel_image_load()
- arch_kexec_locate_mem_hole()
- arch_kexec_kernel_verify_sig()
arch_kexec_kernel_image_load() calls into kexec_image_load_default(), so
drop the static attribute for the latter.
arch_kexec_kernel_verify_sig() is not overridden by any architecture, so
drop the __weak attribute.
Link: https://lkml.kernel.org/r/cover.1656659357.git.naveen.n.rao@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/2cd7ca1fe4d6bb6ca38e3283c717878388ed6788.1656659357.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Suggested-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Future changes make it necessary to call this function from pv.c.
While we are at it, let's properly document kvm_s390_cpus_from_pv() and
kvm_s390_cpus_to_pv().
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-9-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-9-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Do not use memset to clean the whole struct kvm_s390_pv; instead,
explicitly clear the fields that need to be cleared.
Upcoming patches will introduce new fields in the struct kvm_s390_pv
that will not need to be cleared.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-8-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-8-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Due to upcoming changes, it will be possible to temporarily have
multiple protected VMs in the same address space, although only one
will be actually active.
In that scenario, it is necessary to perform an export of every page
that is to be imported, since the hardware does not allow a page
belonging to a protected guest to be imported into a different
protected guest.
This also applies to pages that are shared, and thus accessible by the
host.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-7-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-7-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Use the new protected_count field as a counter instead of the old
is_protected flag. This will be used in upcoming patches.
Increment the counter when a secure configuration is created, and
decrement it when it is destroyed. Previously the flag was set when the
set secure parameters UVC was performed.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-6-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-6-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Refactor s390_reset_acc so that it can be reused in upcoming patches.
We don't want to hold all the locks used in a walk_page_range for too
long, and the destroy page UVC does take some time to complete.
Therefore we quickly gather the pages to destroy, and then destroy them
without holding all the locks.
The new refactored function optionally allows to return early without
completing if a fatal signal is pending (and return and appropriate
error code). Two wrappers are provided to call the new function.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-5-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-5-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
With upcoming patches, normal guests might touch secure pages.
This patch extends the existing exception handler to convert the pages
to non secure also when the exception is triggered by a normal guest.
This can happen for example when a secure guest reboots; the first
stage of a secure guest is non secure, and in general a secure guest
can reboot into non-secure mode.
If the secure memory of the previous boot has not been cleared up
completely yet (which will be allowed to happen in an upcoming patch),
a non-secure guest might touch secure memory, which will need to be
handled properly.
This means that gmap faults must be handled and not cause termination
of the process. The handling is the same as userspace accesses, it's
enough to translate the gmap address to a user address and then let the
normal user fault code handle it.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-4-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-4-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
A secure storage violation is triggered when a protected guest tries to
access secure memory that has been mapped erroneously, or that belongs
to a different protected guest or to the ultravisor.
With upcoming patches, protected guests will be able to trigger secure
storage violations in normal operation. This happens for example if a
protected guest is rebooted with deferred destroy enabled and the new
guest is also protected.
When the new protected guest touches pages that have not yet been
destroyed, and thus are accounted to the previous protected guest, a
secure storage violation is raised.
This patch adds handling of secure storage violations for protected
guests.
This exception is handled by first trying to destroy the page, because
it is expected to belong to a defunct protected guest where a destroy
should be possible. Note that a secure page can only be destroyed if
its protected VM does not have any CPUs, which only happens when the
protected VM is being terminated. If that fails, a normal export of
the page is attempted.
This means that pages that trigger the exception will be made
non-secure (in one way or another) before attempting to use them again
for a different secure guest.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-3-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-3-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Each secure guest must have a unique ASCE (address space control
element); we must avoid that new guests use the same page for their
ASCE, to avoid errors.
Since the ASCE mostly consists of the address of the topmost page table
(plus some flags), we must not return that memory to the pool unless
the ASCE is no longer in use.
Only a successful Destroy Secure Configuration UVC will make the ASCE
reusable again.
If the Destroy Configuration UVC fails, the ASCE cannot be reused for a
secure guest (either for the ASCE or for other memory areas). To avoid
a collision, it must not be used again. This is a permanent error and
the page becomes in practice unusable, so we set it aside and leak it.
On failure we already leak other memory that belongs to the ultravisor
(i.e. the variable and base storage for a guest) and not leaking the
topmost page table was an oversight.
This error (and thus the leakage) should not happen unless the hardware
is broken or KVM has some unknown serious bug.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: 29b40f105e ("KVM: s390: protvirt: Add initial vm and cpu lifecycle handling")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628135619.32410-2-imbrenda@linux.ibm.com
Message-Id: <20220628135619.32410-2-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
z16 also provides facility 197 (The processor-activity-instrumentation
extension 1). Let's add it to KVM.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220711115108.6494-1-borntraeger@linux.ibm.com
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Commit 4efd417f29 ("s390: raise minimum supported machine generation
to z10") removed the usage of alternatives and lowcore in expolines
macros. Remove unneeded header includes as well.
With that, expoline.S doesn't require asm-offsets.h and
expoline_prepare target dependency could be removed.
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://lore.kernel.org/r/patch-2.thread-d13b6c.git-d13b6c96fb5f.your-ad-here.call-01656331067-ext-4899@work.hours
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When CONFIG_EXPOLINE_EXTERN is used expoline thunks are generated
from arch/s390/lib/expoline.S and postlinked into every module.
This is also true for external modules. Add expoline.o build to
the modules_prepare target.
Fixes: 1d2ad08480 ("s390/nospec: add an option to use thunk-extern")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Tested-by: C. Erastus Toe <ctoe@redhat.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Link: https://lore.kernel.org/r/patch-1.thread-d13b6c.git-a2387a74dc49.your-ad-here.call-01656331067-ext-4899@work.hours
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
remove the duplicate includes. While at it sort the includes.
Reported-by: kernel test robot <yujie.liu@intel.com>
Fixes: 73f91b0043 ("KVM: s390: pci: enable host forwarding of Adapter Event Notifications")
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
We have information about the supported attestation header version
and plaintext attestation flag bits.
Let's expose it via the sysfs files.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/lkml/20220601100245.3189993-1-seiden@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
there is an unexpected word 'and' in the comments that need to be dropped
file: arch/s390/kvm/interrupt.c
line: 705
* Subsystem damage are the only two and and are indicated by
changed to:
* Subsystem damage are the only two and are indicated by
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/lkml/20220622140720.7617-1-jiangjian@cdjrlc.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add the necessary code in s390 base, pci and KVM to enable interpretion
of PCI pasthru.
-----BEGIN PGP SIGNATURE-----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=YD+W
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-pci-5.20' into kernelorgnext
KVM: s390/pci: enable zPCI for interpretive execution
Add the necessary code in s390 base, pci and KVM to enable interpretion
of PCI pasthru.
The KVM_S390_ZPCI_OP ioctl provides a mechanism for managing
hardware-assisted virtualization features for s390x zPCI passthrough.
Add the first 2 operations, which can be used to enable/disable
the specified device for Adapter Event Notification interpretation.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20220606203325.110625-21-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
These routines will be invoked at the time an s390x vfio-pci device is
associated with a KVM (or when the association is removed), allowing
the zPCI device to enable or disable load/store intepretation mode;
this requires the host zPCI device to inform firmware of the unique
token (GISA designation) that is associated with the owning KVM.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-17-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
These routines will be wired into a kvm ioctl in order to respond to
requests to enable / disable a device for Adapter Event Notifications /
Adapter Interuption Forwarding.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-16-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The guest must have access to certain facilities in order to allow
interpretive execution of zPCI instructions and adapter event
notifications. However, there are some cases where a guest might
disable interpretation -- provide a mechanism via which we can defer
enabling the associated zPCI interpretation facilities until the guest
indicates it wishes to use them.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-15-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
In cases where interrupts are not forwarded to the guest via firmware,
KVM is responsible for ensuring delivery. When an interrupt presents
with the forwarding bit, we must process the forwarding tables until
all interrupts are delivered.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-14-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Initial setup for Adapter Event Notification Interpretation for zPCI
passthrough devices. Specifically, allocate a structure for forwarding of
adapter events and pass the address of this structure to firmware.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-13-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
This structure will be used to carry kvm passthrough information related to
zPCI devices.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-12-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Store information about what IOAT designation types are supported by
underlying hardware as well as the largest store block size allowed.
These values will be needed by passthrough.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-10-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
For passthrough devices, we will need to know the GISA designation of the
guest if interpretation facilities are to be used. Setup to stash this in
the zdev and set a default of 0 (no GISA designation) for now; a subsequent
patch will set a valid GISA designation for passthrough devices.
Also, extend mpcific routines to specify this stashed designation as part
of the mpcific command.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-9-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
A subsequent patch will be issuing SIC from KVM -- export the necessary
routine and make the operation control definitions available from a header.
Because the routine will now be exported, let's rename __zpci_set_irq_ctrl
to zpci_set_irq_ctrl and get rid of the zero'd iib wrapper function of
the same name.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-8-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
When doing device passthrough where interrupts are being forwarded from
host to guest, we wish to use a pinned section of guest memory as the
vector (the same memory used by the guest as the vector). To accomplish
this, add a new parameter for airq_iv_create which allows passing an
existing vector to be used instead of allocating a new one. The caller
is responsible for ensuring the vector is pinned in memory as well as for
unpinning the memory when the vector is no longer needed.
A subsequent patch will use this new parameter for zPCI interpretation.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-7-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
A subsequent patch will introduce an airq handler that requires additional
TPI information beyond directed vs floating, so pass the entire tpi_info
structure via the handler. Only pci actually uses this information today,
for the other airq handlers this is effectively a no-op.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20220606203325.110625-6-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
