Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
Fix help text typos for DIMLIB.
Fixes: 4f75da3666 ("linux/dim: Move implementation to .c files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Tal Gilboa <talgi@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to Tal Gilboa the only benefit from DIM comes from a driver
that uses it. So it doesn't make sense to make this symbol user visible,
instead all drivers that use it should select it (as is already the case
AFAICT).
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch series "arm64: untag user pointers passed to the kernel", v19.
=== Overview
arm64 has a feature called Top Byte Ignore, which allows to embed pointer
tags into the top byte of each pointer. Userspace programs (such as
HWASan, a memory debugging tool [1]) might use this feature and pass
tagged user pointers to the kernel through syscalls or other interfaces.
Right now the kernel is already able to handle user faults with tagged
pointers, due to these patches:
1. 81cddd65 ("arm64: traps: fix userspace cache maintenance emulation on a
tagged pointer")
2. 7dcd9dd8 ("arm64: hw_breakpoint: fix watchpoint matching for tagged
pointers")
3. 276e9327 ("arm64: entry: improve data abort handling of tagged
pointers")
This patchset extends tagged pointer support to syscall arguments.
As per the proposed ABI change [3], tagged pointers are only allowed to be
passed to syscalls when they point to memory ranges obtained by anonymous
mmap() or sbrk() (see the patchset [3] for more details).
For non-memory syscalls this is done by untaging user pointers when the
kernel performs pointer checking to find out whether the pointer comes
from userspace (most notably in access_ok). The untagging is done only
when the pointer is being checked, the tag is preserved as the pointer
makes its way through the kernel and stays tagged when the kernel
dereferences the pointer when perfoming user memory accesses.
The mmap and mremap (only new_addr) syscalls do not currently accept
tagged addresses. Architectures may interpret the tag as a background
colour for the corresponding vma.
Other memory syscalls (mprotect, etc.) don't do user memory accesses but
rather deal with memory ranges, and untagged pointers are better suited to
describe memory ranges internally. Thus for memory syscalls we untag
pointers completely when they enter the kernel.
=== Other approaches
One of the alternative approaches to untagging that was considered is to
completely strip the pointer tag as the pointer enters the kernel with
some kind of a syscall wrapper, but that won't work with the countless
number of different ioctl calls. With this approach we would need a
custom wrapper for each ioctl variation, which doesn't seem practical.
An alternative approach to untagging pointers in memory syscalls prologues
is to inspead allow tagged pointers to be passed to find_vma() (and other
vma related functions) and untag them there. Unfortunately, a lot of
find_vma() callers then compare or subtract the returned vma start and end
fields against the pointer that was being searched. Thus this approach
would still require changing all find_vma() callers.
=== Testing
The following testing approaches has been taken to find potential issues
with user pointer untagging:
1. Static testing (with sparse [2] and separately with a custom static
analyzer based on Clang) to track casts of __user pointers to integer
types to find places where untagging needs to be done.
2. Static testing with grep to find parts of the kernel that call
find_vma() (and other similar functions) or directly compare against
vm_start/vm_end fields of vma.
3. Static testing with grep to find parts of the kernel that compare
user pointers with TASK_SIZE or other similar consts and macros.
4. Dynamic testing: adding BUG_ON(has_tag(addr)) to find_vma() and running
a modified syzkaller version that passes tagged pointers to the kernel.
Based on the results of the testing the requried patches have been added
to the patchset.
=== Notes
This patchset is meant to be merged together with "arm64 relaxed ABI" [3].
This patchset is a prerequisite for ARM's memory tagging hardware feature
support [4].
This patchset has been merged into the Pixel 2 & 3 kernel trees and is
now being used to enable testing of Pixel phones with HWASan.
Thanks!
[1] http://clang.llvm.org/docs/HardwareAssistedAddressSanitizerDesign.html
[2] 5f960cb10f
[3] https://lkml.org/lkml/2019/6/12/745
[4] https://community.arm.com/processors/b/blog/posts/arm-a-profile-architecture-2018-developments-armv85a
This patch (of 11)
This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.
strncpy_from_user and strnlen_user accept user addresses as arguments, and
do not go through the same path as copy_from_user and others, so here we
need to handle the case of tagged user addresses separately.
Untag user pointers passed to these functions.
Note, that this patch only temporarily untags the pointers to perform
validity checks, but then uses them as is to perform user memory accesses.
[andreyknvl@google.com: fix sparc4 build]
Link: http://lkml.kernel.org/r/CAAeHK+yx4a-P0sDrXTUxMvO2H0CJZUFPffBrg_cU7oJOZyC7ew@mail.gmail.com
Link: http://lkml.kernel.org/r/c5a78bcad3e94d6cda71fcaa60a423231ae71e4c.1563904656.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix an unaligned access which breaks on platforms where this is not
permitted (e.g., Sparc).
Link: http://lkml.kernel.org/r/20190912145502.35229-1-dave.rodgman@arm.com
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Cc: Dave Rodgman <dave.rodgman@arm.com>
Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The original clean up of "cut here" missed the WARN_ON() case (that does
not have a printk message), which was fixed recently by adding an explicit
printk of "cut here". This had the downside of adding a printk() to every
WARN_ON() caller, which reduces the utility of using an instruction
exception to streamline the resulting code. By making this a new BUGFLAG,
all of these can be removed and "cut here" can be handled by the exception
handler.
This was very pronounced on PowerPC, but the effect can be seen on x86 as
well. The resulting text size of a defconfig build shows some small
savings from this patch:
text data bss dec hex filename
19691167 5134320 1646664 26472151 193eed7 vmlinux.before
19676362 5134260 1663048 26473670 193f4c6 vmlinux.after
This change also opens the door for creating something like BUG_MSG(),
where a custom printk() before issuing BUG(), without confusing the "cut
here" line.
Link: http://lkml.kernel.org/r/201908200943.601DD59DCE@keescook
Fixes: 6b15f678fb ("include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9012d01166 ("compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING") allowed all architectures to enable this
option. A couple of build errors were reported by randconfig, but all of
them have been ironed out.
Towards the goal of removing CONFIG_OPTIMIZE_INLINING entirely (and it
will simplify the 'inline' macro in compiler_types.h), this commit changes
it to always-on option. Going forward, the compiler will always be
allowed to not inline functions marked 'inline'.
This is not a problem for x86 since it has been long used by
arch/x86/configs/{x86_64,i386}_defconfig.
I am keeping the config option just in case any problem crops up for other
architectures.
The code clean-up will be done after confirming this is solid.
Link: http://lkml.kernel.org/r/20190830034304.24259-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm seeing a bunch of debug prints from a user of print_hex_dump_bytes()
in my kernel logs, but I don't have CONFIG_DYNAMIC_DEBUG enabled nor do I
have DEBUG defined in my build. The problem is that
print_hex_dump_bytes() calls a wrapper function in lib/hexdump.c that
calls print_hex_dump() with KERN_DEBUG level. There are three cases to
consider here
1. CONFIG_DYNAMIC_DEBUG=y --> call dynamic_hex_dum()
2. CONFIG_DYNAMIC_DEBUG=n && DEBUG --> call print_hex_dump()
3. CONFIG_DYNAMIC_DEBUG=n && !DEBUG --> stub it out
Right now, that last case isn't detected and we still call
print_hex_dump() from the stub wrapper.
Let's make print_hex_dump_bytes() only call print_hex_dump_debug() so that
it works properly in all cases.
Case #1, print_hex_dump_debug() calls dynamic_hex_dump() and we get same
behavior. Case #2, print_hex_dump_debug() calls print_hex_dump() with
KERN_DEBUG and we get the same behavior. Case #3, print_hex_dump_debug()
is a nop, changing behavior to what we want, i.e. print nothing.
Link: http://lkml.kernel.org/r/20190816235624.115280-1-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building with W=1, a number of warnings are issued:
CC lib/extable.o
lib/extable.c:63:6: warning: no previous prototype for 'sort_extable' [-Wmissing-prototypes]
63 | void sort_extable(struct exception_table_entry *start,
| ^~~~~~~~~~~~
lib/extable.c:75:6: warning: no previous prototype for 'trim_init_extable' [-Wmissing-prototypes]
75 | void trim_init_extable(struct module *m)
| ^~~~~~~~~~~~~~~~~
lib/extable.c:115:1: warning: no previous prototype for 'search_extable' [-Wmissing-prototypes]
115 | search_extable(const struct exception_table_entry *base,
| ^~~~~~~~~~~~~~
Add the missing #include for the prototypes.
Link: http://lkml.kernel.org/r/45574.1565235784@turing-police
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building with W=1, we get some warnings:
l CC lib/generic-radix-tree.o
lib/generic-radix-tree.c:39:10: warning: no previous prototype for 'genradix_root_to_depth' [-Wmissing-prototypes]
39 | unsigned genradix_root_to_depth(struct genradix_root *r)
| ^~~~~~~~~~~~~~~~~~~~~~
lib/generic-radix-tree.c:44:23: warning: no previous prototype for 'genradix_root_to_node' [-Wmissing-prototypes]
44 | struct genradix_node *genradix_root_to_node(struct genradix_root *r)
| ^~~~~~~~~~~~~~~~~~~~~
They're not used anywhere else, so make them static inline.
Link: http://lkml.kernel.org/r/46923.1565236485@turing-police
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
core-api should show all the various string functions including the newly
added stracpy and stracpy_pad.
Miscellanea:
o Update the Returns: value for strscpy
o fix a defect with %NUL)
[joe@perches.com: correct return of -E2BIG descriptions]
Link: http://lkml.kernel.org/r/29f998b4c1a9d69fbeae70500ba0daa4b340c546.1563889130.git.joe@perches.com
Link: http://lkml.kernel.org/r/224a6ebf39955f4107c0c376d66155d970e46733.1563841972.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Nitin Gote <nitin.r.gote@intel.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add RB_DECLARE_CALLBACKS_MAX, which generates augmented rbtree callbacks
for the case where the augmented value is a scalar whose definition
follows a max(f(node)) pattern. This actually covers all present uses of
RB_DECLARE_CALLBACKS, and saves some (source) code duplication in the
various RBCOMPUTE function definitions.
[walken@google.com: fix mm/vmalloc.c]
Link: http://lkml.kernel.org/r/CANN689FXgK13wDYNh1zKxdipeTuALG4eKvKpsdZqKFJ-rvtGiQ@mail.gmail.com
[walken@google.com: re-add check to check_augmented()]
Link: http://lkml.kernel.org/r/20190727022027.GA86863@google.com
Link: http://lkml.kernel.org/r/20190703040156.56953-3-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: remove quicklist page table caches".
A while ago Nicholas proposed to remove quicklist page table caches [1].
I've rebased his patch on the curren upstream and switched ia64 and sh to
use generic versions of PTE allocation.
[1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com
This patch (of 3):
Remove page table allocator "quicklists". These have been around for a
long time, but have not got much traction in the last decade and are only
used on ia64 and sh architectures.
The numbers in the initial commit look interesting but probably don't
apply anymore. If anybody wants to resurrect this it's in the git
history, but it's unhelpful to have this code and divergent allocator
behaviour for minor archs.
Also it might be better to instead make more general improvements to page
allocator if this is still so slow.
Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Make working with compound pages easier", v2.
These three patches add three helpers and convert the appropriate
places to use them.
This patch (of 3):
It's unnecessarily hard to find out the size of a potentially huge page.
Replace 'PAGE_SIZE << compound_order(page)' with page_size(page).
Link: http://lkml.kernel.org/r/20190721104612.19120-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In several places we need to be able to operate on pointers which have
gone via a roundtrip:
virt -> {phys,page} -> virt
With KASAN_SW_TAGS, we can't preserve the tag for SLUB objects, and the
{phys,page} -> virt conversion will use KASAN_TAG_KERNEL.
This patch adds tests to ensure that this works as expected, without
false positives which have recently been spotted [1,2] in testing.
[1] https://lore.kernel.org/linux-arm-kernel/20190819114420.2535-1-walter-zh.wu@mediatek.com/
[2] https://lore.kernel.org/linux-arm-kernel/20190819132347.GB9927@lakrids.cambridge.arm.com/
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190821153927.28630-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add memory corruption identification at bug report for software tag-based
mode. The report shows whether it is "use-after-free" or "out-of-bound"
error instead of "invalid-access" error. This will make it easier for
programmers to see the memory corruption problem.
We extend the slab to store five old free pointer tag and free backtrace,
we can check if the tagged address is in the slab record and make a good
guess if the object is more like "use-after-free" or "out-of-bound".
therefore every slab memory corruption can be identified whether it's
"use-after-free" or "out-of-bound".
[aryabinin@virtuozzo.com: simplify & clenup code]
Link: https://lkml.kernel.org/r/3318f9d7-a760-3cc8-b700-f06108ae745f@virtuozzo.com]
Link: http://lkml.kernel.org/r/20190821180332.11450-1-aryabinin@virtuozzo.com
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are some machines with slow disk and fast CPUs. When they are under
memory pressure, it could take a long time to swap before the OOM kicks in
to free up some memory. As the results, it needs a large mem pool for
kmemleak or suffering from higher chance of a kmemleak metadata allocation
failure. 524288 proves to be the good number for all architectures here.
Increase the upper bound to 1M to leave some room for the future.
Link: http://lkml.kernel.org/r/1565807572-26041-1-git-send-email-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently kmemleak uses a static early_log buffer to trace all memory
allocation/freeing before the slab allocator is initialised. Such early
log is replayed during kmemleak_init() to properly initialise the kmemleak
metadata for objects allocated up that point. With a memory pool that
does not rely on the slab allocator, it is possible to skip this early log
entirely.
In order to remove the early logging, consider kmemleak_enabled == 1 by
default while the kmem_cache availability is checked directly on the
object_cache and scan_area_cache variables. The RCU callback is only
invoked after object_cache has been initialised as we wouldn't have any
concurrent list traversal before this.
In order to reduce the number of callbacks before kmemleak is fully
initialised, move the kmemleak_init() call to mm_init().
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: remove WARN_ON(), per Catalin]
Link: http://lkml.kernel.org/r/20190812160642.52134-4-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current default value (400) is too low on many systems (e.g. some
ARM64 platform takes up 1000+ entries).
syzbot uses 16000 as default value, and has proved to be enough on beefy
configurations, so let's pick that value.
This consumes more RAM on boot (each entry is 160 bytes, so in total
~2.5MB of RAM), but the memory would later be freed (early_log is
__initdata).
Link: http://lkml.kernel.org/r/20190730154027.101525-1-drinkcat@chromium.org
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Summary of modules changes for the 5.4 merge window:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing kernel
developers to better manage the export surface, allow subsystem
maintainers to explicitly state that usage of some exported symbols
should only be limited to certain users (think: inter-module or
inter-driver symbols, debugging symbols, etc), as well as more easily
limiting the availability of namespaced symbols to other parts of the
kernel. With the module import requirement, it is also easier to spot
the misuse of exported symbols during patch review. Two new macros are
introduced: EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL(). The API is
thoroughly documented in Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there.
-----BEGIN PGP SIGNATURE-----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=72Uy
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"The main bulk of this pull request introduces a new exported symbol
namespaces feature. The number of exported symbols is increasingly
growing with each release (we're at about 31k exports as of 5.3-rc7)
and we currently have no way of visualizing how these symbols are
"clustered" or making sense of this huge export surface.
Namespacing exported symbols allows kernel developers to more
explicitly partition and categorize exported symbols, as well as more
easily limiting the availability of namespaced symbols to other parts
of the kernel. For starters, we have introduced the USB_STORAGE
namespace to demonstrate the API's usage. I have briefly summarized
the feature and its main motivations in the tag below.
Summary:
- Introduce exported symbol namespaces.
This new feature allows subsystem maintainers to partition and
categorize their exported symbols into explicit namespaces. Module
authors are now required to import the namespaces they need.
Some of the main motivations of this feature include: allowing
kernel developers to better manage the export surface, allow
subsystem maintainers to explicitly state that usage of some
exported symbols should only be limited to certain users (think:
inter-module or inter-driver symbols, debugging symbols, etc), as
well as more easily limiting the availability of namespaced symbols
to other parts of the kernel.
With the module import requirement, it is also easier to spot the
misuse of exported symbols during patch review.
Two new macros are introduced: EXPORT_SYMBOL_NS() and
EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in
Documentation/kbuild/namespaces.rst.
- Some small code and kbuild cleanups here and there"
* tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Remove leftover '#undef' from export header
module: remove unneeded casts in cmp_name()
module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES
module: remove redundant 'depends on MODULES'
module: Fix link failure due to invalid relocation on namespace offset
usb-storage: export symbols in USB_STORAGE namespace
usb-storage: remove single-use define for debugging
docs: Add documentation for Symbol Namespaces
scripts: Coccinelle script for namespace dependencies.
modpost: add support for generating namespace dependencies
export: allow definition default namespaces in Makefiles or sources
module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
modpost: add support for symbol namespaces
module: add support for symbol namespaces.
export: explicitly align struct kernel_symbol
module: support reading multiple values per modinfo tag
gcc 9+ (and gcc 8.3, 7.5) provides a way to override the otherwise
crude heuristic that gcc uses to estimate the size of the code
represented by an asm() statement. From the gcc docs
If you use 'asm inline' instead of just 'asm', then for inlining
purposes the size of the asm is taken as the minimum size, ignoring
how many instructions GCC thinks it is.
For compatibility with older compilers, we obviously want a
#if [understands asm inline]
#define asm_inline asm inline
#else
#define asm_inline asm
#endif
But since we #define the identifier inline to attach some attributes,
we have to use an alternate spelling of that keyword. gcc provides
both __inline__ and __inline, and we currently #define both to inline,
so they all have the same semantics. We have to free up one of
__inline__ and __inline, and the latter is by far the easiest.
The two x86 changes cause smaller code gen differences than I'd
expect, but I think we do want the asm_inline thing available sooner
or later, so this is just to get the ball rolling.
-----BEGIN PGP SIGNATURE-----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=+BVw
-----END PGP SIGNATURE-----
Merge tag 'compiler-attributes-for-linus-v5.4' of git://github.com/ojeda/linux
Pull asm inline support from Miguel Ojeda:
"Make use of gcc 9's "asm inline()" (Rasmus Villemoes):
gcc 9+ (and gcc 8.3, 7.5) provides a way to override the otherwise
crude heuristic that gcc uses to estimate the size of the code
represented by an asm() statement. From the gcc docs
If you use 'asm inline' instead of just 'asm', then for inlining
purposes the size of the asm is taken as the minimum size, ignoring
how many instructions GCC thinks it is.
For compatibility with older compilers, we obviously want a
#if [understands asm inline]
#define asm_inline asm inline
#else
#define asm_inline asm
#endif
But since we #define the identifier inline to attach some attributes,
we have to use an alternate spelling of that keyword. gcc provides
both __inline__ and __inline, and we currently #define both to inline,
so they all have the same semantics.
We have to free up one of __inline__ and __inline, and the latter is
by far the easiest.
The two x86 changes cause smaller code gen differences than I'd
expect, but I think we do want the asm_inline thing available sooner
or later, so this is just to get the ball rolling"
* tag 'compiler-attributes-for-linus-v5.4' of git://github.com/ojeda/linux:
x86: bug.h: use asm_inline in _BUG_FLAGS definitions
x86: alternative.h: use asm_inline for all alternative variants
compiler-types.h: add asm_inline definition
compiler_types.h: don't #define __inline
lib/zstd/mem.h: replace __inline by inline
staging: rtl8723bs: replace __inline by inline
-----BEGIN PGP SIGNATURE-----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=Ui4A
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Fix off-by-one error when calculating messages that might fit into
kmsg buffer. It causes occasional omitting of the last message.
- Add missing pointer check in %pD format modifier handling.
- Some clean up
* tag 'printk-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
ABI: Update dev-kmsg documentation to match current kernel behaviour
printk: Replace strncmp() with str_has_prefix()
lib/test_printf: Remove obvious comments from %pd and %pD tests
lib/test_printf: Add test of null/invalid pointer dereference for dentry
vsprintf: Prevent crash when dereferencing invalid pointers for %pD
printk: Do not lose last line in kmsg buffer dump
Pull networking updates from David Miller:
1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski.
2) Use bio_vec in the networking instead of custom skb_frag_t, from
Matthew Wilcox.
3) Make use of xmit_more in r8169 driver, from Heiner Kallweit.
4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen.
5) Support all variants of 5750X bnxt_en chips, from Michael Chan.
6) More RTNL avoidance work in the core and mlx5 driver, from Vlad
Buslov.
7) Add TCP syn cookies bpf helper, from Petar Penkov.
8) Add 'nettest' to selftests and use it, from David Ahern.
9) Add extack support to drop_monitor, add packet alert mode and
support for HW drops, from Ido Schimmel.
10) Add VLAN offload to stmmac, from Jose Abreu.
11) Lots of devm_platform_ioremap_resource() conversions, from
YueHaibing.
12) Add IONIC driver, from Shannon Nelson.
13) Several kTLS cleanups, from Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits)
mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer
mlxsw: spectrum: Register CPU port with devlink
mlxsw: spectrum_buffers: Prevent changing CPU port's configuration
net: ena: fix incorrect update of intr_delay_resolution
net: ena: fix retrieval of nonadaptive interrupt moderation intervals
net: ena: fix update of interrupt moderation register
net: ena: remove all old adaptive rx interrupt moderation code from ena_com
net: ena: remove ena_restore_ethtool_params() and relevant fields
net: ena: remove old adaptive interrupt moderation code from ena_netdev
net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*()
net: ena: enable the interrupt_moderation in driver_supported_features
net: ena: reimplement set/get_coalesce()
net: ena: switch to dim algorithm for rx adaptive interrupt moderation
net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it
net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable
ethtool: implement Energy Detect Powerdown support via phy-tunable
xen-netfront: do not assume sk_buff_head list is empty in error handling
s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb”
net: ena: don't wake up tx queue when down
drop_monitor: Better sanitize notified packets
...
Pull crypto updates from Herbert Xu:
"API:
- Add the ability to abort a skcipher walk.
Algorithms:
- Fix XTS to actually do the stealing.
- Add library helpers for AES and DES for single-block users.
- Add library helpers for SHA256.
- Add new DES key verification helper.
- Add surrounding bits for ESSIV generator.
- Add accelerations for aegis128.
- Add test vectors for lzo-rle.
Drivers:
- Add i.MX8MQ support to caam.
- Add gcm/ccm/cfb/ofb aes support in inside-secure.
- Add ofb/cfb aes support in media-tek.
- Add HiSilicon ZIP accelerator support.
Others:
- Fix potential race condition in padata.
- Use unbound workqueues in padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (311 commits)
crypto: caam - Cast to long first before pointer conversion
crypto: ccree - enable CTS support in AES-XTS
crypto: inside-secure - Probe transform record cache RAM sizes
crypto: inside-secure - Base RD fetchcount on actual RD FIFO size
crypto: inside-secure - Base CD fetchcount on actual CD FIFO size
crypto: inside-secure - Enable extended algorithms on newer HW
crypto: inside-secure: Corrected configuration of EIP96_TOKEN_CTRL
crypto: inside-secure - Add EIP97/EIP197 and endianness detection
padata: remove cpu_index from the parallel_queue
padata: unbind parallel jobs from specific CPUs
padata: use separate workqueues for parallel and serial work
padata, pcrypt: take CPU hotplug lock internally in padata_alloc_possible
crypto: pcrypt - remove padata cpumask notifier
padata: make padata_do_parallel find alternate callback CPU
workqueue: require CPU hotplug read exclusion for apply_workqueue_attrs
workqueue: unconfine alloc/apply/free_workqueue_attrs()
padata: allocate workqueue internally
arm64: dts: imx8mq: Add CAAM node
random: Use wait_event_freezable() in add_hwgenerator_randomness()
crypto: ux500 - Fix COMPILE_TEST warnings
...
Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIT1g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym9lwCgrHZlMMvfYNVm6GQ5ge58JJsVTL4AoNatTcL4
hfVMA6pCHWBjV65xVSf6
=Tijw
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
habanalabs: correctly cast variable to __le32
habanalabs: show correct id in error print
habanalabs: stop using the acronym KMD
habanalabs: display card name as sensors header
habanalabs: add uapi to retrieve aggregate H/W events
habanalabs: add uapi to retrieve device utilization
habanalabs: Make the Coresight timestamp perpetual
habanalabs: explicitly set the queue-id enumerated numbers
habanalabs: print to kernel log when reset is finished
habanalabs: replace __le32_to_cpu with le32_to_cpu
habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
habanalabs: Handle HW_IP_INFO if device disabled or in reset
habanalabs: Expose devices after initialization is done
habanalabs: improve security in Debug IOCTL
habanalabs: use default structure for user input in Debug IOCTL
habanalabs: Add descriptive name to PSOC app status register
habanalabs: Add descriptive names to PSOC scratch-pad registers
habanalabs: create two char devices per ASIC
habanalabs: change device_setup_cdev() to be more generic
...
-----BEGIN PGP SIGNATURE-----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=QTT+
-----END PGP SIGNATURE-----
Merge tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- a new sensor driver for ov5675
- a new platform driver for Allwinner A10 sensor interface
- some new remote controller keymaps
- some cosmetic changes at V4L2 core in order to avoid #ifdefs and to
merge two core modules into one
- removal of bcm2048 radio driver from staging
- removal of davinci_vpfe video driver from staging
- regression fix since Kernel 5.1 at the legacy VideoBuffer version 1
core
- added some documentation for remote controller protocols
- pixel format documentation was split on two files
- lots of other driver improvements and cleanups
* tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits)
media: videobuf-core.c: poll_wait needs a non-NULL buf pointer
media: sun4i: Make sun4i_csi_formats static
media: imx: remove unused including <linux/version.h>
media: stm32-dcmi: Delete an unnecessary of_node_put() call in dcmi_probe()
media: pvrusb2: qctrl.flag will be uninitlaized if cx2341x_ctrl_query() returns error code
media: em28xx: Fix exception handling in em28xx_alloc_urbs()
media: don't do a 31 bit shift on a signed int
media: use the BIT() macro
media: ov9650: add a sanity check
media: aspeed-video: address a protential usage of an unitialized var
media: vicodec: make life easier for static analyzers
media: remove include stdarg.h from some drivers
v4l2-core: fix coding style for the two new c files
media: v4l2-core: Remove BUG() from i2c and spi helpers
media: v4l2-core: introduce a helper to unregister a i2c subdev
media: v4l2-core: introduce a helper to unregister a spi subdev
media: v4l2-core: move i2c helpers out of v4l2-common.c
media: v4l2-core: move spi helpers out of v4l2-common.c
media: v4l2-core: Module re-organization
media: usbvision: Remove dead code
...
-----BEGIN PGP SIGNATURE-----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=Qt+h
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Two NVMe pull requests:
- ana log parse fix from Anton
- nvme quirks support for Apple devices from Ben
- fix missing bio completion tracing for multipath stack devices
from Hannes and Mikhail
- IP TOS settings for nvme rdma and tcp transports from Israel
- rq_dma_dir cleanups from Israel
- tracing for Get LBA Status command from Minwoo
- Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
- Some consolidation between the fabrics transports for handling
the CAP register
- reset race with ns scanning fix for fabrics (move fabrics
commands to a dedicated request queue with a different lifetime
from the admin request queue)."
- controller reset and namespace scan races fixes
- nvme discovery log change uevent support
- naming improvements from Keith
- multiple discovery controllers reject fix from James
- some regular cleanups from various people
- Series fixing (and re-fixing) null_blk debug printing and nr_devices
checks (André)
- A few pull requests from Song, with fixes from Andy, Guoqing,
Guilherme, Neil, Nigel, and Yufen.
- REQ_OP_ZONE_RESET_ALL support (Chaitanya)
- Bio merge handling unification (Christoph)
- Pick default elevator correctly for devices with special needs
(Damien)
- Block stats fixes (Hou)
- Timeout and support devices nbd fixes (Mike)
- Series fixing races around elevator switching and device add/remove
(Ming)
- sed-opal cleanups (Revanth)
- Per device weight support for BFQ (Fam)
- Support for blk-iocost, a new model that can properly account cost of
IO workloads. (Tejun)
- blk-cgroup writeback fixes (Tejun)
- paride queue init fixes (zhengbin)
- blk_set_runtime_active() cleanup (Stanley)
- Block segment mapping optimizations (Bart)
- lightnvm fixes (Hans/Minwoo/YueHaibing)
- Various little fixes and cleanups
* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
null_blk: format pr_* logs with pr_fmt
null_blk: match the type of parameter nr_devices
null_blk: do not fail the module load with zero devices
block: also check RQF_STATS in blk_mq_need_time_stamp()
block: make rq sector size accessible for block stats
bfq: Fix bfq linkage error
raid5: use bio_end_sector in r5_next_bio
raid5: remove STRIPE_OPS_REQ_PENDING
md: add feature flag MD_FEATURE_RAID0_LAYOUT
md/raid0: avoid RAID0 data corruption due to layout confusion.
raid5: don't set STRIPE_HANDLE to stripe which is in batch list
raid5: don't increment read_errors on EILSEQ return
nvmet: fix a wrong error status returned in error log page
nvme: send discovery log page change events to userspace
nvme: add uevent variables for controller devices
nvme: enable aen regardless of the presence of I/O queues
nvme-fabrics: allow discovery subsystems accept a kato
nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
nvme: Remove redundant assignment of cq vector
nvme: Assign subsys instance from first ctrl
...
Pull core timer updates from Thomas Gleixner:
"Timers and timekeeping updates:
- A large overhaul of the posix CPU timer code which is a preparation
for moving the CPU timer expiry out into task work so it can be
properly accounted on the task/process.
An update to the bogus permission checks will come later during the
merge window as feedback was not complete before heading of for
travel.
- Switch the timerqueue code to use cached rbtrees and get rid of the
homebrewn caching of the leftmost node.
- Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
single function
- Implement the separation of hrtimers to be forced to expire in hard
interrupt context even when PREEMPT_RT is enabled and mark the
affected timers accordingly.
- Implement a mechanism for hrtimers and the timer wheel to protect
RT against priority inversion and live lock issues when a (hr)timer
which should be canceled is currently executing the callback.
Instead of infinitely spinning, the task which tries to cancel the
timer blocks on a per cpu base expiry lock which is held and
released by the (hr)timer expiry code.
- Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
resulting in faster access to timekeeping functions.
- Updates to various clocksource/clockevent drivers and their device
tree bindings.
- The usual small improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
posix-cpu-timers: Fix permission check regression
posix-cpu-timers: Always clear head pointer on dequeue
hrtimer: Add a missing bracket and hide `migration_base' on !SMP
posix-cpu-timers: Make expiry_active check actually work correctly
posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
tick: Mark sched_timer to expire in hard interrupt context
hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
posix-cpu-timers: Utilize timerqueue for storage
posix-cpu-timers: Move state tracking to struct posix_cputimers
posix-cpu-timers: Deduplicate rlimit handling
posix-cpu-timers: Remove pointless comparisons
posix-cpu-timers: Get rid of 64bit divisions
posix-cpu-timers: Consolidate timer expiry further
posix-cpu-timers: Get rid of zero checks
rlimit: Rewrite non-sensical RLIMIT_CPU comment
posix-cpu-timers: Respect INFINITY for hard RTTIME limit
posix-cpu-timers: Switch thread group sampling to array
posix-cpu-timers: Restructure expiry array
posix-cpu-timers: Remove cputime_expires
...
Pull CPU hotplug updates from Thomas Gleixner:
"A small update for the SMP hotplug code code:
- Track "booted once" CPUs in a cpumask so the x86 APIC code has an
easy way to decide whether broadcast IPIs are safe to use or not.
- Implement a cpumask_or_equal() helper for the IPI broadcast
evaluation.
The above two changes have been also pulled into the x86/apic
branch for implementing the conditional IPI broadcast feature.
- Cache the number of online CPUs instead of reevaluating it over and
over. num_online_cpus() is an unreliable snapshot anyway except
when it is used outside a cpu hotplug locked region. The cached
access is not changing this, but it's definitely faster than
calculating the bitmap wheight especially in hot paths"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Cache number of online CPUs
cpumask: Implement cpumask_or_equal()
smp/hotplug: Track booted once CPUs in a cpumask
Pull x86 cpu-feature updates from Ingo Molnar:
- Rework the Intel model names symbols/macros, which were decades of
ad-hoc extensions and added random noise. It's now a coherent, easy
to follow nomenclature.
- Add new Intel CPU model IDs:
- "Tiger Lake" desktop and mobile models
- "Elkhart Lake" model ID
- and the "Lightning Mountain" variant of Airmont, plus support code
- Add the new AVX512_VP2INTERSECT instruction to cpufeatures
- Remove Intel MPX user-visible APIs and the self-tests, because the
toolchain (gcc) is not supporting it going forward. This is the
first, lowest-risk phase of MPX removal.
- Remove X86_FEATURE_MFENCE_RDTSC
- Various smaller cleanups and fixes
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/cpu: Update init data for new Airmont CPU model
x86/cpu: Add new Airmont variant to Intel family
x86/cpu: Add Elkhart Lake to Intel family
x86/cpu: Add Tiger Lake to Intel family
x86: Correct misc typos
x86/intel: Add common OPTDIFFs
x86/intel: Aggregate microserver naming
x86/intel: Aggregate big core graphics naming
x86/intel: Aggregate big core mobile naming
x86/intel: Aggregate big core client naming
x86/cpufeature: Explain the macro duplication
x86/ftrace: Remove mcount() declaration
x86/PCI: Remove superfluous returns from void functions
x86/msr-index: Move AMD MSRs where they belong
x86/cpu: Use constant definitions for CPU models
lib: Remove redundant ftrace flag removal
x86/crash: Remove unnecessary comparison
x86/bitops: Use __builtin_constant_p() directly instead of IS_IMMEDIATE()
x86: Remove X86_FEATURE_MFENCE_RDTSC
x86/mpx: Remove MPX APIs
...
Currently, compiler_types.h #defines __inline as inline (and further
#defines inline to automatically attach some attributes), so this does
not change functionality. It serves as preparation for removing the
#define of __inline.
While at it, also remove the __attribute__((unused)) - it's already
included in the definition of the inline macro, and "open-coded"
__attribute__(()) should be avoided.
Since commit a95b37e20d (kbuild: get <linux/compiler_types.h> out of
<linux/kconfig.h>), compiler_types.h is automatically included by all
kernel C code - i.e., the definition of inline including the unused
attribute is guaranteed to be in effect whenever ZSTD_STATIC is
expanded.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
When CONFIG_MODULES is disabled, CONFIG_UNUSED_SYMBOLS is pointless,
thus it should be invisible.
Instead of adding "depends on MODULES", I moved it to the sub-menu
"Enable loadable module support", which is a better fit. I put it
close to TRIM_UNUSED_KSYMS because it depends on !UNUSED_SYMBOLS.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Keep the "Library routines" menu intact by moving OBJAGG into it.
Otherwise OBJAGG is displayed/presented as an orphan in the
various config menus.
Fixes: 0a020d416d ("lib: introduce initial implementation of object aggregation manager")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Ido Schimmel <idosch@mellanox.com>
Cc: David S. Miller <davem@davemloft.net>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add the ability to use unaligned chunks in the AF_XDP umem. By
relaxing where the chunks can be placed, it allows to use an
arbitrary buffer size and place whenever there is a free
address in the umem. Helps more seamless DPDK AF_XDP driver
integration. Support for i40e, ixgbe and mlx5e, from Kevin and
Maxim.
2) Addition of a wakeup flag for AF_XDP tx and fill rings so the
application can wake up the kernel for rx/tx processing which
avoids busy-spinning of the latter, useful when app and driver
is located on the same core. Support for i40e, ixgbe and mlx5e,
from Magnus and Maxim.
3) bpftool fixes for printf()-like functions so compiler can actually
enforce checks, bpftool build system improvements for custom output
directories, and addition of 'bpftool map freeze' command, from Quentin.
4) Support attaching/detaching XDP programs from 'bpftool net' command,
from Daniel.
5) Automatic xskmap cleanup when AF_XDP socket is released, and several
barrier/{read,write}_once fixes in AF_XDP code, from Björn.
6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf
inclusion as well as libbpf versioning improvements, from Andrii.
7) Several new BPF kselftests for verifier precision tracking, from Alexei.
8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya.
9) And more BPF kselftest improvements all over the place, from Stanislav.
10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub.
11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan.
12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni.
13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin.
14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar.
15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari,
Peter, Wei, Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
lib/crypto/sha256.c and include/crypto/sha256_base.h define
99% identical functions to init a sha256_state struct for sha224 or
sha256 use.
This commit moves the functions from lib/crypto/sha256.c to
include/crypto/sha.h (making them static inline) and makes the
sha224/256_base_init static inline functions from
include/crypto/sha256_base.h wrappers around the now also
static inline include/crypto/sha.h functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The generic sha256 implementation from lib/crypto/sha256.c uses data
structs defined in crypto/sha.h, so lets move the function prototypes
there too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add test config into_buf to allow request_firmware_into_buf to be
called instead of request_firmware/request_firmware_direct. The number
of parameters differ calling request_firmware_into_buf and support
has not been added to test such api in test_firmware until now.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190822184005.901-2-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit dfe2a77fd2 ("kfifo: fix kfifo_alloc() and kfifo_init()") made
the kfifo code round the number of elements up. That was good for
__kfifo_alloc(), but it's actually wrong for __kfifo_init().
The difference? __kfifo_alloc() will allocate the rounded-up number of
elements, but __kfifo_init() uses an allocation done by the caller. We
can't just say "use more elements than the caller allocated", and have
to round down.
The good news? All the normal cases will be using power-of-two arrays
anyway, and most users of kfifo's don't use kfifo_init() at all, but one
of the helper macros to declare a KFIFO that enforce the proper
power-of-two behavior. But it looks like at least ibmvscsis might be
affected.
The bad news? Will Deacon refers to an old thread and points points out
that the memory ordering in kfifo's is questionable. See
https://lore.kernel.org/lkml/20181211034032.32338-1-yuleixzhang@tencent.com/
for more.
Fixes: dfe2a77fd2 ("kfifo: fix kfifo_alloc() and kfifo_init()")
Reported-by: laokz <laokz@foxmail.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lib/crypto/sha256.c / lib/crypto/libsha256.o may end up being a module,
so it needs a MODULE_LICENSE() line, add this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Fixed RCU usage in logical PIO
- Added a function to unregister a logical PIO range in logical PIO
to support the fixes in the hisi-lpc driver
- Fixed and optimized hisi-lpc driver to avoid potential use-after-free
and driver unbind crash
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BnY2
-----END PGP SIGNATURE-----
Merge tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/fixes
Hisilicon fixes for v5.3-rc
- Fixed RCU usage in logical PIO
- Added a function to unregister a logical PIO range in logical PIO
to support the fixes in the hisi-lpc driver
- Fixed and optimized hisi-lpc driver to avoid potential use-after-free
and driver unbind crash
* tag 'hisi-fixes-for-5.3' of git://github.com/hisilicon/linux-hisi:
bus: hisi_lpc: Add .remove method to avoid driver unbind crash
bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
lib: logic_pio: Add logic_pio_unregister_range()
lib: logic_pio: Avoid possible overlap for unregistering regions
lib: logic_pio: Fix RCU usage
Link: https://lore.kernel.org/r/5D562335.7000902@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add sha224 support to the lib/crypto/sha256 library code. This will allow
us to replace both the sha256 and sha224 parts of crypto/sha256_generic.c
when we remove the code duplication in further patches in this series.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before this commit lib/crypto/sha256.c has only been used in the s390 and
x86 purgatory code, make it suitable for generic use:
* Export interesting symbols
* Add -D__DISABLE_EXPORTS to CFLAGS_sha256.o for purgatory builds to
avoid the exports for the purgatory builds
* Add to lib/crypto/Makefile and crypto/Kconfig
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use get/put_unaligned_be32 in lib/crypto/sha256.c to load / store data
so that it can be used with unaligned buffers too, making it more generic.
And use memzero_explicit for better clearing of sensitive data.
Note unlike other patches in this series this commit actually makes
functional changes to the sha256 code as used by the purgatory code.
This fully aligns the lib/crypto/sha256.c sha256 implementation with the
one from crypto/sha256_generic.c allowing us to remove the latter in
further patches in this series.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Generic crypto implementations belong under lib/crypto not directly in
lib, likewise the header should be in include/crypto, not include/linux.
Note that the code in lib/crypto/sha256.c is not yet available for
generic use after this commit, it is still only used by the s390 and x86
purgatory code. Making it suitable for generic use is done in further
patches in this series.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For some reason after the first 15 steps the last statement of each
step ends with "t1+t2", missing spaces around the "+". This commit
fixes this. This was done with a 's/= t1+t2/= t1 + t2/' to make sure
no functional changes are introduced.
Note the main goal of this is to make lib/sha256.c's sha256_transform
and its helpers identical in formatting too the duplcate implementation
in crypto/sha256_generic.c so that "diff -u" can be used to compare them
to prove that no functional changes are made when further patches in
this series consolidate the 2 implementations into 1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
