Commit Graph

585 Commits

Author SHA1 Message Date
Tomer Tayar
795f93e650 accel/habanalabs: revise print on EQ heartbeat failure
Don't print the "previous EQ index" value in case of a EQ heartbeat
failure, because it is incremented along with the EQ CI and therefore
redundant.

In addition, as the CPU-CP PI is zeroed when it reaches a value that is
twice the queue size, add a value of the CI with a similar wrap around,
to make it easier to compare the values.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:32 +03:00
Farah Kassabri
9ee446f9b5 accel/habanalabs: add more info upon cpu pkt timeout
In order to have better debuggability upon encountering FW issues,
We are adding additional info once CPU packet timeout expires.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:32 +03:00
Ilia Levi
fda92282b0 accel/habanalabs: additional print in device-in-use info
When device release triggers a hard reset, there is a printout of
the cause. Currently listed causes (that increment context refcount)
are active command submissions and exported DMA buffer objects. In
any other case, the printout emits "unknown reason". We identify and
print another reason - allocated command buffers.

Signed-off-by: Ilia Levi <illevi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:32 +03:00
Ofir Bitton
f8422017b2 accel/habanalbs/gaudi2: reduce interrupt count to 128
Some systems allow a maximum number of 128 MSI-X interrupts.
Hence we reduce the interrupt count to 128 instead of 512.

Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:07 +03:00
Tal Cohen
61f4f624ea accel/habanalabs: disable EQ interrupt after disabling pci
When sending disable pci msg towards firmware, there is a
possibility that an EQ packet is already pending,
disabling EQ interrupt will prevent this from happening.
The interrupt will be re-enabled after reset.

Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:05 +03:00
Farah Kassabri
52fbab90ed accel/habanalabs: change the heartbeat scheduling point
Currently we schedule the heartbeat thread at late init, only then
we set the INTS_REGISTER packet which enables events to be received
from firmware.

Init may take some time and we want to give firmware 2 full cycles of
heartbeat thread after it received INTS_REGISTER.

The patch will move the heartbeat thread scheduling to be after driver
is done with all initializations.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:04 +03:00
Rakesh Ughreja
3309887c6f accel/habanalabs/gaudi2: unsecure edma max outstanding register
Netowrk EDMAs uses more outstanding transfers so this needs to be
programmed by EDMA firmware.

Signed-off-by: Rakesh Ughreja <rughreja@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:04 +03:00
Ofir Bitton
2214cafd10 accel/habanalabs: remove timestamp registration debug prints
There are several timestamp registration debug prints which
spams the kernel log whenever dyn debug is enabled.
Remove those prints.

Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:04 +03:00
Vitaly Margolin
cebb64f933 accel/habanalabs: add cpld ts cpld_timestamp cpucp
Add cpld_timestamp field to cpucp_info structure and return cpld
timestamp as part of cpld version

Signed-off-by: Vitaly Margolin <vmargolin@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:04 +03:00
Tomer Tayar
3d613b0cb5 accel/habanalabs: add a common handler for clock change events
As the new dynamic EQ includes clock change events which are common and
not ASIC-specific, add a common handler for these events.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:04 +03:00
Farah Kassabri
cbac6f4088 accel/habanalabs/gaudi2: add GAUDI2D revision support
Gaudi2 with PCI revision ID with the value of '4' represents Gaudi2D
device and should be detected and initialized as Gaudi2.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:04 +03:00
Tomer Tayar
93a296dde1 accel/habanalabs: move hl_eq_heartbeat_event_handle() to common code
hl_eq_heartbeat_event_handle() doesn't have ASIC specific code, and
therefore can be moved from Gaudi2-only code to common code, and
possibly used for other ASICs.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:04 +03:00
Tomer Tayar
5f6ad3c64a accel/habanalabs: add an EQ size ASIC property
Future supported ASICs might use the dynamic EQ mechanism with the
firmware, and in that case the EQ size won't be equal to the default
HL_EQ_SIZE_IN_BYTES value.
Add an ASIC property to enable overriding this value.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:04 +03:00
Tomer Tayar
c8c10dcaca accel/habanalabs/gaudi2: assume hard-reset by FW upon MC SEI severe error
FW initiates a hard reset upon an MC SEI severe error.
Align the driver to expect this reset and avoid accessing the device
until the reset is done.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:03 +03:00
Tomer Tayar
c754bcf9dd accel/habanalabs/gaudi2: revise return value handling in gaudi2_hbm_sei_handle_read_err()
The return value in gaudi2_hbm_sei_handle_read_err() is boolean and not
a bitmask, so there is need for "|= true".
In addition, rename the 'rc' variable, as no "return code" is returned
here but an indication if a hard reset is required.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:03 +03:00
Ariel Suller
990e0d91bf accel/habanalabs/gaudi2: align interrupt names to table
when reporting tpc events, the dcore and tpc in dcore should
be reported and propagated, and not the generatl tpc number

Signed-off-by: Ariel Suller <asuller@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:03 +03:00
Farah Kassabri
b94488be08 accel/habanalabs: check for errors after preboot is ready
Driver should check and report any fatal errors detected by preboot,
before it attempts to load the boot fit.
Some errors may cause the driver to stop the boot process and mark
the device as unusable.
This check will allow the driver to fail and print the error reported
by preboot and skip the time wasting attempt of trying to load the
boot fit, which will fail due to the error.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:03 +03:00
Igal Zeltser
25abbe7ac1 accel/habanalabs: use msg_header instead of desc_header
Struct comms_desc_header is deprecated and replaced by struct
comms_msg_header. As a preparation for removing comms_desc_header
from FW, all it's usage in code is replaced by comms_msg_header.

Signed-off-by: Igal Zeltser <izeltser@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:53:03 +03:00
Farah Kassabri
31bd26931d accel/habanalabs: add heartbeat debug info
It is hard to debug the reason for heartbeat check failures.
As an attempt to ease this task, this patch will provide more
information when this failure happens.
Heartbeat checks the communication with FW, so printing
the CPU queue pi/ci and the counter of how many times that event
was received would help in debugging the issue.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:52:53 +03:00
Ohad Sharabi
42f04ca65c accel/habanalabs: add device name to invalidation failure msg
This addition helps log parsers better define the error without the need
to go back and search the device name on former log lines.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:46:14 +03:00
Tal Risin
26250af92f accel/habanalabs: expose server type in debugfs
Exposing server type through debugfs to enable easier access via
scripts.

Signed-off-by: Tal Risin <trisin@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:46:07 +03:00
Tomer Tayar
3d4bd5e292 accel/habanalabs: use parent device for trace events
Trace events might still be recorded after the accel device is released,
while the device name is no longer available.
Modify the trace functions to use the parent device instead, which is
available at that point and still informative as the device name.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:45:59 +03:00
Ohad Sharabi
ecda35d461 accel/habanalabs: no CPUCP prints on heartbeat failure
If we detected heartbet event while some daemon in the background send
(via driver interface) CPUCP messages the dmesg will be flooded.

Instead, a slight refactor in hl_fw_send_cpu_message() returns -EAGAIN
when CPU is disabled (i.e. heartbeat failure) and only then.

Later, all calling functions that may be invoked by user space can issue
prints only if the error code is not -EAGAIN.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:45:51 +03:00
Ofir Bitton
467cfe9456 accel/habanalabs/gaudi2: align embedded specs headers
Align embedded headers to latest release.

Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:44:45 +03:00
Ohad Sharabi
705e520dc5 accel/habanalabs: restructure function that checks heartbeat received
The function returned an error code which isn't propagated up the stack
(nor is it printed).

The return value is only checked for =0 or !=0 which implies bool return
value.

The function signature is updated accordingly, renamed, and slightly
refactored.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:44:25 +03:00
Farah Kassabri
5a558f369e accel/habanalabs/gaudi2: update interrupts related headers
Align the interrupts related headers to latest release.

Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:44:17 +03:00
Dani Liberman
241fa91e7c accel/habanalabs: add device name to error print
The extra info will help in better traceability and debug.

Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:44:08 +03:00
Ohad Sharabi
892bc64827 accel/habanalabs/gaudi2: use single function to compare FW versions
Currently, the code contains 2 types of FW version comparison functions:
- hl_is_fw_sw_ver_[below/equal_or_greater]()
- gaudi2 specific function of the type
  gaudi2_is_fw_ver_[below/above]x_y_z()

Moreover, some functions use the inner FW version which shuold be only
stage during development but not version dependencies.

Finally, some tests are done to deprecated FW version to which LKD
should hold no compatibility.

This commit aligns all APIs to a single function that just compares the
version and return an integers indicator (similar in some way to
strcmp()).

In addition, this generic function now considers also the sub-minor FW
version and also remove dead code resulting in deprecated FW versions
compatibility.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Ofir Bitton <obitton@habana.ai>
Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23 09:42:24 +03:00
Linus Torvalds
61307b7be4 The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.  Notable
 series include:
 
 - Lucas Stach has provided some page-mapping
   cleanup/consolidation/maintainability work in the series "mm/treewide:
   Remove pXd_huge() API".
 
 - In the series "Allow migrate on protnone reference with
   MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
   MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
   test.
 
 - In their series "Memory allocation profiling" Kent Overstreet and
   Suren Baghdasaryan have contributed a means of determining (via
   /proc/allocinfo) whereabouts in the kernel memory is being allocated:
   number of calls and amount of memory.
 
 - Matthew Wilcox has provided the series "Various significant MM
   patches" which does a number of rather unrelated things, but in largely
   similar code sites.
 
 - In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
   Weiner has fixed the page allocator's handling of migratetype requests,
   with resulting improvements in compaction efficiency.
 
 - In the series "make the hugetlb migration strategy consistent" Baolin
   Wang has fixed a hugetlb migration issue, which should improve hugetlb
   allocation reliability.
 
 - Liu Shixin has hit an I/O meltdown caused by readahead in a
   memory-tight memcg.  Addressed in the series "Fix I/O high when memory
   almost met memcg limit".
 
 - In the series "mm/filemap: optimize folio adding and splitting" Kairui
   Song has optimized pagecache insertion, yielding ~10% performance
   improvement in one test.
 
 - Baoquan He has cleaned up and consolidated the early zone
   initialization code in the series "mm/mm_init.c: refactor
   free_area_init_core()".
 
 - Baoquan has also redone some MM initializatio code in the series
   "mm/init: minor clean up and improvement".
 
 - MM helper cleanups from Christoph Hellwig in his series "remove
   follow_pfn".
 
 - More cleanups from Matthew Wilcox in the series "Various page->flags
   cleanups".
 
 - Vlastimil Babka has contributed maintainability improvements in the
   series "memcg_kmem hooks refactoring".
 
 - More folio conversions and cleanups in Matthew Wilcox's series
 
 	"Convert huge_zero_page to huge_zero_folio"
 	"khugepaged folio conversions"
 	"Remove page_idle and page_young wrappers"
 	"Use folio APIs in procfs"
 	"Clean up __folio_put()"
 	"Some cleanups for memory-failure"
 	"Remove page_mapping()"
 	"More folio compat code removal"
 
 - David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
   functions to work on folis".
 
 - Code consolidation and cleanup work related to GUP's handling of
   hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
 
 - Rick Edgecombe has developed some fixes to stack guard gaps in the
   series "Cover a guard gap corner case".
 
 - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
   "mm/ksm: fix ksm exec support for prctl".
 
 - Baolin Wang has implemented NUMA balancing for multi-size THPs.  This
   is a simple first-cut implementation for now.  The series is "support
   multi-size THP numa balancing".
 
 - Cleanups to vma handling helper functions from Matthew Wilcox in the
   series "Unify vma_address and vma_pgoff_address".
 
 - Some selftests maintenance work from Dev Jain in the series
   "selftests/mm: mremap_test: Optimizations and style fixes".
 
 - Improvements to the swapping of multi-size THPs from Ryan Roberts in
   the series "Swap-out mTHP without splitting".
 
 - Kefeng Wang has significantly optimized the handling of arm64's
   permission page faults in the series
 
 	"arch/mm/fault: accelerate pagefault when badaccess"
 	"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
 
 - GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
   GUP-fast".
 
 - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
   use struct vm_fault".
 
 - selftests build fixes from John Hubbard in the series "Fix
   selftests/mm build without requiring "make headers"".
 
 - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
   series "Improved Memory Tier Creation for CPUless NUMA Nodes".  Fixes
   the initialization code so that migration between different memory types
   works as intended.
 
 - David Hildenbrand has improved follow_pte() and fixed an errant driver
   in the series "mm: follow_pte() improvements and acrn follow_pte()
   fixes".
 
 - David also did some cleanup work on large folio mapcounts in his
   series "mm: mapcount for large folios + page_mapcount() cleanups".
 
 - Folio conversions in KSM in Alex Shi's series "transfer page to folio
   in KSM".
 
 - Barry Song has added some sysfs stats for monitoring multi-size THP's
   in the series "mm: add per-order mTHP alloc and swpout counters".
 
 - Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
   and limit checking cleanups".
 
 - Matthew Wilcox has been looking at buffer_head code and found the
   documentation to be lacking.  The series is "Improve buffer head
   documentation".
 
 - Multi-size THPs get more work, this time from Lance Yang.  His series
   "mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
   the freeing of these things.
 
 - Kemeng Shi has added more userspace-visible writeback instrumentation
   in the series "Improve visibility of writeback".
 
 - Kemeng Shi then sent some maintenance work on top in the series "Fix
   and cleanups to page-writeback".
 
 - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
   series "Improve anon_vma scalability for anon VMAs".  Intel's test bot
   reported an improbable 3x improvement in one test.
 
 - SeongJae Park adds some DAMON feature work in the series
 
 	"mm/damon: add a DAMOS filter type for page granularity access recheck"
 	"selftests/damon: add DAMOS quota goal test"
 
 - Also some maintenance work in the series
 
 	"mm/damon/paddr: simplify page level access re-check for pageout"
 	"mm/damon: misc fixes and improvements"
 
 - David Hildenbrand has disabled some known-to-fail selftests ni the
   series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
 
 - memcg metadata storage optimizations from Shakeel Butt in "memcg:
   reduce memory consumption by memcg stats".
 
 - DAX fixes and maintenance work from Vishal Verma in the series
   "dax/bus.c: Fixups for dax-bus locking".
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
 jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
 nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
 =V3R/
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull mm updates from Andrew Morton:
 "The usual shower of singleton fixes and minor series all over MM,
  documented (hopefully adequately) in the respective changelogs.
  Notable series include:

   - Lucas Stach has provided some page-mapping cleanup/consolidation/
     maintainability work in the series "mm/treewide: Remove pXd_huge()
     API".

   - In the series "Allow migrate on protnone reference with
     MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
     MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
     one test.

   - In their series "Memory allocation profiling" Kent Overstreet and
     Suren Baghdasaryan have contributed a means of determining (via
     /proc/allocinfo) whereabouts in the kernel memory is being
     allocated: number of calls and amount of memory.

   - Matthew Wilcox has provided the series "Various significant MM
     patches" which does a number of rather unrelated things, but in
     largely similar code sites.

   - In his series "mm: page_alloc: freelist migratetype hygiene"
     Johannes Weiner has fixed the page allocator's handling of
     migratetype requests, with resulting improvements in compaction
     efficiency.

   - In the series "make the hugetlb migration strategy consistent"
     Baolin Wang has fixed a hugetlb migration issue, which should
     improve hugetlb allocation reliability.

   - Liu Shixin has hit an I/O meltdown caused by readahead in a
     memory-tight memcg. Addressed in the series "Fix I/O high when
     memory almost met memcg limit".

   - In the series "mm/filemap: optimize folio adding and splitting"
     Kairui Song has optimized pagecache insertion, yielding ~10%
     performance improvement in one test.

   - Baoquan He has cleaned up and consolidated the early zone
     initialization code in the series "mm/mm_init.c: refactor
     free_area_init_core()".

   - Baoquan has also redone some MM initializatio code in the series
     "mm/init: minor clean up and improvement".

   - MM helper cleanups from Christoph Hellwig in his series "remove
     follow_pfn".

   - More cleanups from Matthew Wilcox in the series "Various
     page->flags cleanups".

   - Vlastimil Babka has contributed maintainability improvements in the
     series "memcg_kmem hooks refactoring".

   - More folio conversions and cleanups in Matthew Wilcox's series:
	"Convert huge_zero_page to huge_zero_folio"
	"khugepaged folio conversions"
	"Remove page_idle and page_young wrappers"
	"Use folio APIs in procfs"
	"Clean up __folio_put()"
	"Some cleanups for memory-failure"
	"Remove page_mapping()"
	"More folio compat code removal"

   - David Hildenbrand chipped in with "fs/proc/task_mmu: convert
     hugetlb functions to work on folis".

   - Code consolidation and cleanup work related to GUP's handling of
     hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".

   - Rick Edgecombe has developed some fixes to stack guard gaps in the
     series "Cover a guard gap corner case".

   - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
     series "mm/ksm: fix ksm exec support for prctl".

   - Baolin Wang has implemented NUMA balancing for multi-size THPs.
     This is a simple first-cut implementation for now. The series is
     "support multi-size THP numa balancing".

   - Cleanups to vma handling helper functions from Matthew Wilcox in
     the series "Unify vma_address and vma_pgoff_address".

   - Some selftests maintenance work from Dev Jain in the series
     "selftests/mm: mremap_test: Optimizations and style fixes".

   - Improvements to the swapping of multi-size THPs from Ryan Roberts
     in the series "Swap-out mTHP without splitting".

   - Kefeng Wang has significantly optimized the handling of arm64's
     permission page faults in the series
	"arch/mm/fault: accelerate pagefault when badaccess"
	"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"

   - GUP cleanups from David Hildenbrand in "mm/gup: consistently call
     it GUP-fast".

   - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
     path to use struct vm_fault".

   - selftests build fixes from John Hubbard in the series "Fix
     selftests/mm build without requiring "make headers"".

   - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
     series "Improved Memory Tier Creation for CPUless NUMA Nodes".
     Fixes the initialization code so that migration between different
     memory types works as intended.

   - David Hildenbrand has improved follow_pte() and fixed an errant
     driver in the series "mm: follow_pte() improvements and acrn
     follow_pte() fixes".

   - David also did some cleanup work on large folio mapcounts in his
     series "mm: mapcount for large folios + page_mapcount() cleanups".

   - Folio conversions in KSM in Alex Shi's series "transfer page to
     folio in KSM".

   - Barry Song has added some sysfs stats for monitoring multi-size
     THP's in the series "mm: add per-order mTHP alloc and swpout
     counters".

   - Some zswap cleanups from Yosry Ahmed in the series "zswap
     same-filled and limit checking cleanups".

   - Matthew Wilcox has been looking at buffer_head code and found the
     documentation to be lacking. The series is "Improve buffer head
     documentation".

   - Multi-size THPs get more work, this time from Lance Yang. His
     series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
     optimizes the freeing of these things.

   - Kemeng Shi has added more userspace-visible writeback
     instrumentation in the series "Improve visibility of writeback".

   - Kemeng Shi then sent some maintenance work on top in the series
     "Fix and cleanups to page-writeback".

   - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
     the series "Improve anon_vma scalability for anon VMAs". Intel's
     test bot reported an improbable 3x improvement in one test.

   - SeongJae Park adds some DAMON feature work in the series
	"mm/damon: add a DAMOS filter type for page granularity access recheck"
	"selftests/damon: add DAMOS quota goal test"

   - Also some maintenance work in the series
	"mm/damon/paddr: simplify page level access re-check for pageout"
	"mm/damon: misc fixes and improvements"

   - David Hildenbrand has disabled some known-to-fail selftests ni the
     series "selftests: mm: cow: flag vmsplice() hugetlb tests as
     XFAIL".

   - memcg metadata storage optimizations from Shakeel Butt in "memcg:
     reduce memory consumption by memcg stats".

   - DAX fixes and maintenance work from Vishal Verma in the series
     "dax/bus.c: Fixups for dax-bus locking""

* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
  memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
  selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
  mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
  mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
  selftests: cgroup: add tests to verify the zswap writeback path
  mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
  mm/damon/core: fix return value from damos_wmark_metric_value
  mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
  selftests: cgroup: remove redundant enabling of memory controller
  Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
  Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
  Docs/mm/damon/design: use a list for supported filters
  Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
  Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
  selftests/damon: classify tests for functionalities and regressions
  selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
  selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
  selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
  mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
  selftests/damon: add a test for DAMOS quota goal
  ...
2024-05-19 09:21:03 -07:00
Kent Overstreet
0069455bcb fix missing vmalloc.h includes
Patch series "Memory allocation profiling", v6.

Overview:
Low overhead [1] per-callsite memory allocation profiling. Not just for
debug kernels, overhead low enough to be deployed in production.

Example output:
  root@moria-kvm:~# sort -rn /proc/allocinfo
   127664128    31168 mm/page_ext.c:270 func:alloc_page_ext
    56373248     4737 mm/slub.c:2259 func:alloc_slab_page
    14880768     3633 mm/readahead.c:247 func:page_cache_ra_unbounded
    14417920     3520 mm/mm_init.c:2530 func:alloc_large_system_hash
    13377536      234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs
    11718656     2861 mm/filemap.c:1919 func:__filemap_get_folio
     9192960     2800 kernel/fork.c:307 func:alloc_thread_stack_node
     4206592        4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable
     4136960     1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start
     3940352      962 mm/memory.c:4214 func:alloc_anon_folio
     2894464    22613 fs/kernfs/dir.c:615 func:__kernfs_new_node
     ...

Usage:
kconfig options:
 - CONFIG_MEM_ALLOC_PROFILING
 - CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT
 - CONFIG_MEM_ALLOC_PROFILING_DEBUG
   adds warnings for allocations that weren't accounted because of a
   missing annotation

sysctl:
  /proc/sys/vm/mem_profiling

Runtime info:
  /proc/allocinfo

Notes:

[1]: Overhead
To measure the overhead we are comparing the following configurations:
(1) Baseline with CONFIG_MEMCG_KMEM=n
(2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
    CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n)
(3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
    CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y)
(4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y &&
    CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1)
(5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT
(6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
    CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n)  && CONFIG_MEMCG_KMEM=y
(7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
    CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y

Performance overhead:
To evaluate performance we implemented an in-kernel test executing
multiple get_free_page/free_page and kmalloc/kfree calls with allocation
sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU
affinity set to a specific CPU to minimize the noise. Below are results
from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on
56 core Intel Xeon:

                        kmalloc                 pgalloc
(1 baseline)            6.764s                  16.902s
(2 default disabled)    6.793s  (+0.43%)        17.007s (+0.62%)
(3 default enabled)     7.197s  (+6.40%)        23.666s (+40.02%)
(4 runtime enabled)     7.405s  (+9.48%)        23.901s (+41.41%)
(5 memcg)               13.388s (+97.94%)       48.460s (+186.71%)
(6 def disabled+memcg)  13.332s (+97.10%)       48.105s (+184.61%)
(7 def enabled+memcg)   13.446s (+98.78%)       54.963s (+225.18%)

Memory overhead:
Kernel size:

   text           data        bss         dec         diff
(1) 26515311	      18890222    17018880    62424413
(2) 26524728	      19423818    16740352    62688898    264485
(3) 26524724	      19423818    16740352    62688894    264481
(4) 26524728	      19423818    16740352    62688898    264485
(5) 26541782	      18964374    16957440    62463596    39183

Memory consumption on a 56 core Intel CPU with 125GB of memory:
Code tags:           192 kB
PageExts:         262144 kB (256MB)
SlabExts:           9876 kB (9.6MB)
PcpuExts:            512 kB (0.5MB)

Total overhead is 0.2% of total memory.

Benchmarks:

Hackbench tests run 100 times:
hackbench -s 512 -l 200 -g 15 -f 25 -P
      baseline       disabled profiling           enabled profiling
avg   0.3543         0.3559 (+0.0016)             0.3566 (+0.0023)
stdev 0.0137         0.0188                       0.0077


hackbench -l 10000
      baseline       disabled profiling           enabled profiling
avg   6.4218         6.4306 (+0.0088)             6.5077 (+0.0859)
stdev 0.0933         0.0286                       0.0489

stress-ng tests:
stress-ng --class memory --seq 4 -t 60
stress-ng --class cpu --seq 4 -t 60
Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/

[2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/


This patch (of 37):

The next patch drops vmalloc.h from a system header in order to fix a
circular dependency; this adds it to all the files that were pulling it in
implicitly.

[kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c]
  Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev
[surenb@google.com: fix arch/x86/mm/numa_32.c]
  Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com
[kent.overstreet@linux.dev: a few places were depending on sizes.h]
  Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev
[arnd@arndb.de: fix mm/kasan/hw_tags.c]
  Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org
[surenb@google.com: fix arc build]
  Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-04-25 20:55:49 -07:00
Jani Nikula
33d5ae6cac drm/print: drop include debugfs.h and include where needed
Surprisingly many places depend on debugfs.h to be included via
drm_print.h. Fix them.

v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe

v2: Also fix ivpu and vmwgfx

Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-1-jani.nikula@intel.com
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm
Acked-by: Matt Coster <matt.coster@imgtec.com> # drm/imagination
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Robert Foss <rfoss@kernel.org> #drm/bridge
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25 17:05:48 +03:00
Dave Airlie
0208ca55aa Linux 6.9-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmYlapoeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGJLgH/RFrsXefpxAWACJv
 wRmIx/YFjI3Z4nypBZPXysX/JOuf/cf4bR22jMHC1vhQDtxVgB7eUpEYx0C0Y5RD
 ll7cunAZCpP+PB725/bOWbaF94eigl8xC4RrKPon4tG1CS9NAvCJFDyNgWpqh48s
 sSKKae68a16zMtIX5Za8nvmsBQOeD67ZFBgI4m7wIDDhTXY3XlG84r8Rz/ZwcdE/
 rExFkDMUqjpoJVAMBtETQNk4pvKZVMrW2B0f/xZSR+IKXw5l2FO0raXkIG/6TERs
 CxJvCuUjKIosqFLIK2O/cU9G+5V2axZ/WD8YRwDr2vlnnOPht+dFQzyPcuSqezbG
 ShIhQo8=
 =GI5F
 -----END PGP SIGNATURE-----

Backmerge tag 'v6.9-rc5' into drm-next

Linux 6.9-rc5

I've had a persistent msm failure on clang, and the fix is in fixes
so just pull it back to fix that.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-04-22 14:35:52 +10:00
Arnd Bergmann
42d34193f9 accel/qaic: mark debugfs stub functions as static inline
The alternative stub functions are listed as global, which produces
a build failure in some configs:

In file included from drivers/accel/qaic/qaic_drv.c:31:
drivers/accel/qaic/qaic_debugfs.h:16:5: error: no previous prototype for 'qaic_bootlog_register' [-Werror=missing-prototypes]
   16 | int qaic_bootlog_register(void) { return 0; }
      |     ^~~~~~~~~~~~~~~~~~~~~
drivers/accel/qaic/qaic_debugfs.h:17:6: error: no previous prototype for 'qaic_bootlog_unregister' [-Werror=missing-prototypes]
   17 | void qaic_bootlog_unregister(void) {}
      |      ^~~~~~~~~~~~~~~~~~~~~~~
drivers/accel/qaic/qaic_debugfs.h:18:6: error: no previous prototype for 'qaic_debugfs_init' [-Werror=missing-prototypes]
   18 | void qaic_debugfs_init(struct qaic_drm_device *qddev) {}
      |      ^~~~~~~~~~~~~~~~~

Make them static inline as intended.

Fixes: 5f8df5c6de ("accel/qaic: Add bootlog debugfs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409133945.2976190-1-arnd@kernel.org
2024-04-12 09:53:28 -06:00
Jeffrey Hugo
76b801aa21 accel/qaic: Add Sahara implementation for firmware loading
The AIC100 secondary bootloader uses the Sahara protocol for two
purposes - loading the runtime firmware images from the host, and
offloading crashdumps to the host. The crashdump functionality is only
invoked when the AIC100 device encounters a crash and dumps are enabled.
Also the collection of the dump is optional - the host can reject
collecting the dump.

The Sahara protocol contains many features and modes including firmware
upload, crashdump download, and client commands. For simplicity,
implement the parts of the protocol needed for loading firmware to the
device.

Fundamentally, the Sahara protocol is an embedded file transfer
protocol. Both sides negotiate a connection through a simple exchange of
hello messages. After handshaking through a hello message, the device
either sends a message requesting images, or a message advertising the
memory dump available for the host. For image transfer, the remote device
issues a read data request that provides an image (by ID), an offset, and
a length. The host has an internal mapping of image IDs to filenames. The
host is expected to access the image and transfer the requested chunk to
the device. The device can issue additional read requests, or signal that
it has consumed enough data from this image with an end of image message.
The host confirms the end of image, and the device can proceed with
another image by starting over with the hello exchange again.

Some images may be optional, and only provided as part of a provisioning
flow. The host is not aware of this information, and thus should report
an error to the device when an image is not available. The device will
evaluate if the image is required or not, and take the appropriate
action.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322034917.3522388-1-quic_jhugo@quicinc.com
2024-04-12 09:49:31 -06:00
Jacek Lawrynowicz
fd7726e759 accel/ivpu: Fix deadlock in context_xa
ivpu_device->context_xa is locked both in kernel thread and IRQ context.
It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization
otherwise the lock could be acquired from a thread and interrupted by
an IRQ that locks it for the second time causing the deadlock.

This deadlock was reported by lockdep and observed in internal tests.

Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-9-jacek.lawrynowicz@linux.intel.com
2024-04-08 10:55:01 +02:00
Jacek Lawrynowicz
0d298e2329 accel/ivpu: Fix missed error message after VPU rename
Change "VPU" to "NPU" in ivpu_suspend() so it matches all other error
messages.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-8-jacek.lawrynowicz@linux.intel.com
2024-04-08 10:55:01 +02:00
Jacek Lawrynowicz
c52c35e5b4 accel/ivpu: Return max freq for DRM_IVPU_PARAM_CORE_CLOCK_RATE
DRM_IVPU_PARAM_CORE_CLOCK_RATE returns current NPU frequency which
could be 0 if device was sleeping. This value isn't really useful to
the user space, so return max freq instead which can be used to estimate
NPU performance.

Fixes: c39dc15191 ("accel/ivpu: Read clock rate only if device is up")
Cc: <stable@vger.kernel.org> # v6.7
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-7-jacek.lawrynowicz@linux.intel.com
2024-04-08 10:54:21 +02:00
Wachowski, Karol
3556f92261 accel/ivpu: Improve clarity of MMU error messages
This patch improves readability and clarity of MMU error messages.
Previously, the error strings were somewhat confusing and could lead to
ambiguous interpretations, making it difficult to diagnose issues.

Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-6-jacek.lawrynowicz@linux.intel.com
2024-04-08 10:54:21 +02:00
Jacek Lawrynowicz
875bc9cd1b accel/ivpu: Put NPU back to D3hot after failed resume
Put NPU in D3hot after ivpu_resume() fails to power up the device.
This will assure that D3->D0 power cycle will be performed before
the next resume and also will minimize power usage in this corner case.

Fixes: 28083ff18d ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-5-jacek.lawrynowicz@linux.intel.com
2024-04-08 10:54:21 +02:00
Wachowski, Karol
3534eacbf1 accel/ivpu: Fix PCI D0 state entry in resume
In case of failed power up we end up left in PCI D3hot
state making it impossible to access NPU registers on retry.
Enter D0 state on retry before proceeding with power up sequence.

Fixes: 28083ff18d ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-4-jacek.lawrynowicz@linux.intel.com
2024-04-08 10:54:11 +02:00
Jacek Lawrynowicz
e3caadf1f9 accel/ivpu: Remove d3hot_after_power_off WA
Always enter D3hot after entering D0i3 an all platforms.
This minimizes power usage.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-3-jacek.lawrynowicz@linux.intel.com
2024-04-08 10:53:20 +02:00
Wachowski, Karol
f0cf7ffcd0 accel/ivpu: Check return code of ipc->lock init
Return value of drmm_mutex_init(ipc->lock) was unchecked.

Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-2-jacek.lawrynowicz@linux.intel.com
2024-04-08 10:53:19 +02:00
Jeffrey Hugo
e495e523b8 accel/qaic: Add fifo queued debugfs
When debugging functional issues with workload input processing, it is
useful to know if requests are backing up in the fifo, or perhaps
getting stuck elsewhere. To answer the question of how many requests are
in the fifo, implement a "queued" debugfs entry per-dbc that returns the
number of pending requests when read.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322175730.3855440-4-quic_jhugo@quicinc.com
2024-04-05 09:47:56 -06:00
Jeffrey Hugo
b05d357244 accel/qaic: Add fifo size debugfs
Each DMA Bridge Channel (dbc) has a unique configured fifo size which is
specified by the userspace client of that dbc. Since the fifo is
circular, it is useful to know the configured size when debugging
issues.

Add a per-dbc subdirectory in debugfs and in each subdirectory add a
fifo_size entry that will display the size of that dbc's fifo when read.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322175730.3855440-3-quic_jhugo@quicinc.com
2024-04-05 09:47:19 -06:00
Jeffrey Hugo
5f8df5c6de accel/qaic: Add bootlog debugfs
During the boot process of AIC100, the bootloaders (PBL and SBL) log
messages to device RAM. During SBL, if the host opens the QAIC_LOGGING
channel, SBL will offload the contents of the log buffer to the host,
and stream any new messages that SBL logs.

This log of the boot process can be very useful for an initial triage of
any boot related issues. For example, if SBL rejects one of the runtime
firmware images for a validation failure, SBL will log a reason why.

Add the ability of the driver to open the logging channel, receive the
messages, and store them. Also define a debugfs entry called "bootlog"
by hooking into the DRM debugfs framework. When the bootlog debugfs
entry is read, the current contents of the log that the host is caching
is displayed to the user. The driver will retain the cache until it
detects that the device has rebooted.  At that point, the cache will be
freed, and the driver will wait for a new log. With this scheme, the
driver will only have a cache of the log from the current device boot.
Note that if the driver initializes a device and it is already in the
runtime state (QSM), no bootlog will be available through this mechanism
because the driver and SBL have not communicated.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322175730.3855440-2-quic_jhugo@quicinc.com
2024-04-05 09:41:50 -06:00
Linus Torvalds
480e035fc4 drm for 6.9:
core:
 - EDID cleanups
 - scheduler error handling fixes
 - managed: add drmm_release_action() with tests
 - add ratelimited drm debug print
 - DPCD PSR early transport macro
 - DP tunneling and bandwidth allocation helpers
 - remove built-in edids
 - dp: Avoid AUX transfers on powered-down displays
 - dp: Add VSC SDP helpers
 
 cross drivers:
 - use new drm print helpers
 - switch to ->read_edid callback
 - gem: add stats for shared buffers plus updates to amdgpu, i915, xe
 
 syncobj:
 - fixes to waiting and sleeping
 
 ttm:
 - add tests
 - fix errno codes
 - simply busy-placement handling
 - fix page decryption
 
 media:
 - tc358743: fix v4l device registration
 
 video:
 - move all kernel parameters for video behind CONFIG_VIDEO
 
 sound:
 - remove <drm/drm_edid.h> include from header
 
 ci:
 - add tests for msm
 - fix apq8016 runner
 
 efifb:
 - use copy of global screen_info state
 
 vesafb:
 - use copy of global screen_info state
 
 simplefb:
 - fix logging
 
 bridge:
 - ite-6505: fix DP link-training bug
 - samsung-dsim: fix error checking in probe
 - samsung-dsim: add bsh-smm-s2/pro boards
 - tc358767: fix regmap usage
 - imx: add i.MX8MP HDMI PVI plus DT bindings
 - imx: add i.MX8MP HDMI TX plus DT bindings
 - sii902x: fix probing and unregistration
 - tc358767: limit pixel PLL input range
 - switch to new drm_bridge_read_edid() interface
 
 panel:
 - ltk050h3146w: error-handling fixes
 - panel-edp: support delay between power-on and enable; use put_sync in
   unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49 V8.0,
   BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
 - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
 - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
 - add BOE TH101MB31IG002-28A plus DT bindings
 - add EDT ETML1010G3DRA plus DT bindings
 - add Novatek NT36672E LCD DSI plus DT bindings
 - nt36523: support 120Hz timings, fix includes
 - simple: fix display timings on RK32FN48H
 - visionox-vtdr6130: fix initialization
 - add Powkiddy RGB10MAX3 plus DT bindings
 - st7703: support panel rotation plus DT bindings
 - add Himax HX83112A plus DT bindings
 - ltk500hd1829: add support for ltk101b4029w and admatec 9904370
 - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs
 
 panel-orientation-quirks:
 - GPD Win Mini
 
 amdgpu:
 - Validate DMABuf imports in compute VMs
 - Add RAS ACA framework
 - PSP 13 fixes
 - Misc code cleanups
 - Replay fixes
 - Atom interpretor PS, WS bounds checking
 - DML2 fixes
 - Audio fixes
 - DCN 3.5 Z state fixes
 - Remove deprecated ida_simple usage
 - UBSAN fixes
 - RAS fixes
 - Enable seq64 infrastructure
 - DC color block enablement
 - Documentation updates
 - DC documentation updates
 - DMCUB updates
 - ATHUB 4.1 support
 - LSDMA 7.0 support
 - JPEG DPG support
 - IH 7.0 support
 - HDP 7.0 support
 - VCN 5.0 support
 - SMU 13.0.6 updates
 - NBIO 7.11 updates
 - SDMA 6.1 updates
 - MMHUB 3.3 updates
 - DCN 3.5.1 support
 - NBIF 6.3.1 support
 - VPE 6.1.1 support
 
 amdkfd:
 - Validate DMABuf imports in compute VMs
 - SVM fixes
 - Trap handler updates and enhancements
 - Fix cache size reporting
 - Relocate the trap handler
 
 radeon:
 - Atom interpretor PS, WS bounds checking
 - Misc code cleanups
 
 xe:
 - new query for GuC submission version
 - Remove unused persistent exec_queues
 - Add vram frequency sysfs attributes
 - Add the flag XE_VM_BIND_FLAG_DUMPABLE
 - Drop pre-production workarounds
 - Drop kunit tests for unsupported platforms
 - Start pumbling SR-IOV support with memory based interrupts for VF
 - Allow to map BO in GGTT with PAT index corresponding to
   XE_CACHE_UC to work with memory based interrupts
 - Add GuC Doorbells Manager as prep work SR-IOV
 - Implement additional workarounds for xe2 and MTL
 - Program a few registers according to perfomance guide spec for Xe2
 - Fix remaining 32b build issues and enable it back
 - Fix build with CONFIG_DEBUG_FS=n
 - Fix warnings from GuC ABI headers
 - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
 - Release mmap mappings on rpm suspend
 - Disable mid-thread preemption when not properly supported by hardware
 - Fix xe_exec by reserving extra fence slot for CPU bind
 - Fix xe_exec with full long running exec queue
 - Canonicalize addresses where needed for Xe2 and add to devcoredum
 - Toggle USM support for Xe2
 - Only allow 1 ufence per exec / bind IOCTL
 - Add GuC firmware loading for Lunar Lake
 - Add XE_VMA_PTE_64K VMA flag
 
 i915:
 - Add more ADL-N PCI IDs
 - Enable fastboot also on older platforms
 - Early transport for panel replay and PSR
 - New ARL PCI IDs
 - DP TPS4 PHY test pattern support
 - Unify and improve VSC SDP for PSR and non-PSR cases
 - Refactor memory regions and improve debug logging
 - Rework global state serialization
 - Remove unused CDCLK divider fields
 - Unify HDCP connector logging format
 - Use display instead of graphics version in display code
 - Move VBT and opregion debugfs next to the implementation
 - Abstract opregion interface, use opaque type
 - MTL fixes
 - HPD handling fixes
 - Add GuC submission interface version query
 - Atomically invalidate userptr on mmu-notifier
 - Update handling of MMIO triggered reports
 - Don't make assumptions about intel_wakeref_t type
 - Extend driver code of Xe_LPG to Xe_LPG+
 - Add flex arrays to struct i915_syncmap
 - Allow for very slow HuC loading
 - DP tunneling and bandwidth allocation support
 
 msm:
 - Correct bindings for MSM8976 and SM8650 platforms
 - Start migration of MDP5 platforms to DPU driver
 - X1E80100 MDSS support
 - DPU:
 - Improve DSC allocation, fixing several important corner cases
 - Add support for SDM630/SDM660 platforms
 - Simplify dpu_encoder_phys_ops
 - Apply fixes targeting DSC support with a single DSC encoder
 - Apply fixes for HCTL_EN timing configuration
 - X1E80100 support
 - Add support for YUV420 over DP
 - GPU:
 - fix sc7180 UBWC config
 - fix a7xx LLC config
 - new gpu support: a305B, a750, a702
 - machine support: SM7150 (different power levels than other a618)
 - a7xx devcoredump support
 
 habanalabs:
 - configure IRQ affinity according to NUMA node
 - move HBM MMU page tables inside the HBM
 - improve device reset
 - check extended PCIe errors
 
 ivpu:
 - updates to firmware API
 - refactor BO allocation
 
 imx:
 - use devm_ functions during init
 
 hisilicon:
 - fix EDID includes
 
 mgag200:
 - improve ioremap usage
 - convert to struct drm_edid
 - Work around PCI write bursts
 
 nouveau:
 - disp: use kmemdup()
 - fix EDID includes
 - documentation fixes
 
 qaic:
 - fixes to BO handling
 - make use of DRM managed release
 - fix order of remove operations
 
 rockchip:
 - analogix_dp: get encoder port from DT
 - inno_hdmi: support HDMI for RK3128
 - lvds: error-handling fixes
 
 ssd130x:
 - support SSD133x plus DT bindings
 
 tegra:
 - fix error handling
 
 tilcdc:
 - make use of DRM managed release
 
 v3d:
 - show memory stats in debugfs
 - Support display MMU page size
 
 vc4:
 - fix error handling in plane prepare_fb
 - fix framebuffer test in plane helpers
 
 virtio:
 - add venus capset defines
 
 vkms:
 - fix OOB access when programming the LUT
 - Kconfig improvements
 
 vmwgfx:
 - unmap surface before changing plane state
 - fix memory leak in error handling
 - documentation fixes
 - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
 - fix null-pointer deref in execbuf
 - refactor display-mode probing
 - fix fencing for creating cursor MOBs
 - fix cursor-memory lifetime
 
 xlnx:
 - fix live video input for ZynqMP DPSUB
 
 lima:
 - fix memory leak
 
 loongson:
 - fail if no VRAM present
 
 meson:
 - switch to new drm_bridge_read_edid() interface
 
 renesas:
 - add RZ/G2L DU support plus DT bindings
 
 mxsfb:
 - Use managed mode config
 
 sun4i:
 - HDMI: updates to atomic mode setting
 
 mediatek:
 - Add display driver for MT8188 VDOSYS1
 - DSI driver cleanups
 - Filter modes according to hardware capability
 - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip
 
 etnaviv:
 - enhancements for NPU and MRT support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmXxI+AACgkQDHTzWXnE
 hr5isxAApZ+DxesDbV8bd91KXL03vTfJtM5xVQuZoDzrr20KdTvu2EfQcCFnAUjl
 YtY05U9arDT4Txq5nX70Xc6I5M9HN6lqSUfsWhI6xUcR9TUollPbYwEu8IdoMaCG
 TRnspkiheye+DLFY6omLNH2aG1/k1IIefVWKaClFpbNPaaSHREDiY7/rkmErMBIS
 hrN13+6IVzX7+6fmNgHugUfdyawDJ8J9Nsc8T3Zlioljq3p+VbtStLsGeABTHSEJ
 MX18FwbGllI+QcXvaXM8gIg8NYKvSx/ZtlvKTpyPpTjZT3i3BpY+7yJqWDRQhiGM
 VTX7di1f90yWgzlYE5T33MW7Imvw3q04N7qYJ+Z1LHD/A8VyjwPUKLeul8P9ousT
 0qQLSQsnuXH5AMLDh8IeLG/i0hAMWJ2UbProFSAFhd/UQHP7QOm2mmCsf79me9It
 qKFn6QZKvAKGZk/myTbQIVAmQWrDCpKq4i1aoKXEvcEuQUtM1lPvmMVsStVEfG+y
 ACaI24zSJACViH6rfhVzr74giwZX/ay0NSXqwRXfD5kX8fXb050LxLGW93iYZoHv
 FpdT2C8oTS1A5nsZpoxwVP35euUsp7D4J5YYbrZder2m0s0DDCVLMqdFrSVNdWDM
 4ZQRiY3wCiJjSS8dpwppW0uaVGjtnGQnjQ5sQrIw0vKkwxee0TQ=
 =WLj9
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel

Pull drm updates from Dave Airlie:
 "Highlights are usual, more AMD IP blocks for future hw, i915/xe
  changes, Displayport tunnelling support for i915, msm YUV over DP
  changes, new tests for ttm, but its mostly a lot of stuff all over the
  place from lots of people.

  core:
   - EDID cleanups
   - scheduler error handling fixes
   - managed: add drmm_release_action() with tests
   - add ratelimited drm debug print
   - DPCD PSR early transport macro
   - DP tunneling and bandwidth allocation helpers
   - remove built-in edids
   - dp: Avoid AUX transfers on powered-down displays
   - dp: Add VSC SDP helpers

  cross drivers:
   - use new drm print helpers
   - switch to ->read_edid callback
   - gem: add stats for shared buffers plus updates to amdgpu, i915, xe

  syncobj:
   - fixes to waiting and sleeping

  ttm:
   - add tests
   - fix errno codes
   - simply busy-placement handling
   - fix page decryption

  media:
   - tc358743: fix v4l device registration

  video:
   - move all kernel parameters for video behind CONFIG_VIDEO

  sound:
   - remove <drm/drm_edid.h> include from header

  ci:
   - add tests for msm
   - fix apq8016 runner

  efifb:
   - use copy of global screen_info state

  vesafb:
   - use copy of global screen_info state

  simplefb:
   - fix logging

  bridge:
   - ite-6505: fix DP link-training bug
   - samsung-dsim: fix error checking in probe
   - samsung-dsim: add bsh-smm-s2/pro boards
   - tc358767: fix regmap usage
   - imx: add i.MX8MP HDMI PVI plus DT bindings
   - imx: add i.MX8MP HDMI TX plus DT bindings
   - sii902x: fix probing and unregistration
   - tc358767: limit pixel PLL input range
   - switch to new drm_bridge_read_edid() interface

  panel:
   - ltk050h3146w: error-handling fixes
   - panel-edp: support delay between power-on and enable; use put_sync
     in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
     V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
   - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
   - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
   - add BOE TH101MB31IG002-28A plus DT bindings
   - add EDT ETML1010G3DRA plus DT bindings
   - add Novatek NT36672E LCD DSI plus DT bindings
   - nt36523: support 120Hz timings, fix includes
   - simple: fix display timings on RK32FN48H
   - visionox-vtdr6130: fix initialization
   - add Powkiddy RGB10MAX3 plus DT bindings
   - st7703: support panel rotation plus DT bindings
   - add Himax HX83112A plus DT bindings
   - ltk500hd1829: add support for ltk101b4029w and admatec 9904370
   - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs

  panel-orientation-quirks:
   - GPD Win Mini

  amdgpu:
   - Validate DMABuf imports in compute VMs
   - Add RAS ACA framework
   - PSP 13 fixes
   - Misc code cleanups
   - Replay fixes
   - Atom interpretor PS, WS bounds checking
   - DML2 fixes
   - Audio fixes
   - DCN 3.5 Z state fixes
   - Remove deprecated ida_simple usage
   - UBSAN fixes
   - RAS fixes
   - Enable seq64 infrastructure
   - DC color block enablement
   - Documentation updates
   - DC documentation updates
   - DMCUB updates
   - ATHUB 4.1 support
   - LSDMA 7.0 support
   - JPEG DPG support
   - IH 7.0 support
   - HDP 7.0 support
   - VCN 5.0 support
   - SMU 13.0.6 updates
   - NBIO 7.11 updates
   - SDMA 6.1 updates
   - MMHUB 3.3 updates
   - DCN 3.5.1 support
   - NBIF 6.3.1 support
   - VPE 6.1.1 support

  amdkfd:
   - Validate DMABuf imports in compute VMs
   - SVM fixes
   - Trap handler updates and enhancements
   - Fix cache size reporting
   - Relocate the trap handler

  radeon:
   - Atom interpretor PS, WS bounds checking
   - Misc code cleanups

  xe:
   - new query for GuC submission version
   - Remove unused persistent exec_queues
   - Add vram frequency sysfs attributes
   - Add the flag XE_VM_BIND_FLAG_DUMPABLE
   - Drop pre-production workarounds
   - Drop kunit tests for unsupported platforms
   - Start pumbling SR-IOV support with memory based interrupts for VF
   - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
     to work with memory based interrupts
   - Add GuC Doorbells Manager as prep work SR-IOV
   - Implement additional workarounds for xe2 and MTL
   - Program a few registers according to perfomance guide spec for Xe2
   - Fix remaining 32b build issues and enable it back
   - Fix build with CONFIG_DEBUG_FS=n
   - Fix warnings from GuC ABI headers
   - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
   - Release mmap mappings on rpm suspend
   - Disable mid-thread preemption when not properly supported by
     hardware
   - Fix xe_exec by reserving extra fence slot for CPU bind
   - Fix xe_exec with full long running exec queue
   - Canonicalize addresses where needed for Xe2 and add to devcoredum
   - Toggle USM support for Xe2
   - Only allow 1 ufence per exec / bind IOCTL
   - Add GuC firmware loading for Lunar Lake
   - Add XE_VMA_PTE_64K VMA flag

  i915:
   - Add more ADL-N PCI IDs
   - Enable fastboot also on older platforms
   - Early transport for panel replay and PSR
   - New ARL PCI IDs
   - DP TPS4 PHY test pattern support
   - Unify and improve VSC SDP for PSR and non-PSR cases
   - Refactor memory regions and improve debug logging
   - Rework global state serialization
   - Remove unused CDCLK divider fields
   - Unify HDCP connector logging format
   - Use display instead of graphics version in display code
   - Move VBT and opregion debugfs next to the implementation
   - Abstract opregion interface, use opaque type
   - MTL fixes
   - HPD handling fixes
   - Add GuC submission interface version query
   - Atomically invalidate userptr on mmu-notifier
   - Update handling of MMIO triggered reports
   - Don't make assumptions about intel_wakeref_t type
   - Extend driver code of Xe_LPG to Xe_LPG+
   - Add flex arrays to struct i915_syncmap
   - Allow for very slow HuC loading
   - DP tunneling and bandwidth allocation support

  msm:
   - Correct bindings for MSM8976 and SM8650 platforms
   - Start migration of MDP5 platforms to DPU driver
   - X1E80100 MDSS support
   - DPU:
      - Improve DSC allocation, fixing several important corner cases
      - Add support for SDM630/SDM660 platforms
      - Simplify dpu_encoder_phys_ops
      - Apply fixes targeting DSC support with a single DSC encoder
      - Apply fixes for HCTL_EN timing configuration
      - X1E80100 support
      - Add support for YUV420 over DP
   - GPU:
      - fix sc7180 UBWC config
      - fix a7xx LLC config
      - new gpu support: a305B, a750, a702
      - machine support: SM7150 (different power levels than other a618)
      - a7xx devcoredump support

  habanalabs:
   - configure IRQ affinity according to NUMA node
   - move HBM MMU page tables inside the HBM
   - improve device reset
   - check extended PCIe errors

  ivpu:
   - updates to firmware API
   - refactor BO allocation

  imx:
   - use devm_ functions during init

  hisilicon:
   - fix EDID includes

  mgag200:
   - improve ioremap usage
   - convert to struct drm_edid
   - Work around PCI write bursts

  nouveau:
   - disp: use kmemdup()
   - fix EDID includes
   - documentation fixes

  qaic:
   - fixes to BO handling
   - make use of DRM managed release
   - fix order of remove operations

  rockchip:
   - analogix_dp: get encoder port from DT
   - inno_hdmi: support HDMI for RK3128
   - lvds: error-handling fixes

  ssd130x:
   - support SSD133x plus DT bindings

  tegra:
   - fix error handling

  tilcdc:
   - make use of DRM managed release

  v3d:
   - show memory stats in debugfs
   - Support display MMU page size

  vc4:
   - fix error handling in plane prepare_fb
   - fix framebuffer test in plane helpers

  virtio:
   - add venus capset defines

  vkms:
   - fix OOB access when programming the LUT
   - Kconfig improvements

  vmwgfx:
   - unmap surface before changing plane state
   - fix memory leak in error handling
   - documentation fixes
   - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
   - fix null-pointer deref in execbuf
   - refactor display-mode probing
   - fix fencing for creating cursor MOBs
   - fix cursor-memory lifetime

  xlnx:
   - fix live video input for ZynqMP DPSUB

  lima:
   - fix memory leak

  loongson:
   - fail if no VRAM present

  meson:
   - switch to new drm_bridge_read_edid() interface

  renesas:
   - add RZ/G2L DU support plus DT bindings

  mxsfb:
   - Use managed mode config

  sun4i:
   - HDMI: updates to atomic mode setting

  mediatek:
   - Add display driver for MT8188 VDOSYS1
   - DSI driver cleanups
   - Filter modes according to hardware capability
   - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip

  etnaviv:
   - enhancements for NPU and MRT support"

* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
  drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
  drm/amd/pm: wait for completion of the EnableGfxImu message
  drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
  drm/amdgpu: add smu 14.0.1 support
  drm/amdgpu: add VPE 6.1.1 discovery support
  drm/amdgpu/vpe: add VPE 6.1.1 support
  drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
  drm/amdgpu/vpe: add collaborate mode support for VPE
  drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
  drm/amdgpu/vpe: add multi instance VPE support
  drm/amdgpu/discovery: add nbif v6_3_1 ip block
  drm/amdgpu: Add nbif v6_3_1 ip block support
  drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
  drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
  arch/powerpc: Remove <linux/fb.h> from backlight code
  macintosh/via-pmu-backlight: Include <linux/backlight.h>
  fbdev/chipsfb: Include <linux/backlight.h>
  drm/etnaviv: Restore some id values
  drm/amdkfd: make kfd_class constant
  drm/amdgpu: add ring timeout information in devcoredump
  ...
2024-03-13 18:34:05 -07:00
Linus Torvalds
07abb19a9b Power management updates for 6.9-rc1
- Allow the Energy Model to be updated dynamically (Lukasz Luba).
 
  - Add support for LZ4 compression algorithm to the hibernation image
    creation and loading code (Nikhil V).
 
  - Fix and clean up system suspend statistics collection (Rafael
    Wysocki).
 
  - Simplify device suspend and resume handling in the power management
    core code (Rafael Wysocki).
 
  - Fix PCI hibernation support description (Yiwei Lin).
 
  - Make hibernation take set_memory_ro() return values into account as
    appropriate (Christophe Leroy).
 
  - Set mem_sleep_current during kernel command line setup to avoid an
    ordering issue with handling it (Maulik Shah).
 
  - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
    driver's system suspend callback (Qingliang Li).
 
  - Simplify pm_runtime_get_if_active() usage and add a replacement for
    pm_runtime_put_autosuspend() (Sakari Ailus).
 
  - Add a tracepoint for runtime_status changes tracking (Vilas Bhat).
 
  - Fix section title markdown in the runtime PM documentation (Yiwei
    Lin).
 
  - Enable preferred core support in the amd-pstate cpufreq driver (Meng
    Li).
 
  - Fix min_perf assignment in amd_pstate_adjust_perf() and make the
    min/max limit perf values in amd-pstate always stay within the
    (highest perf, lowest perf) range (Tor Vic, Meng Li).
 
  - Allow intel_pstate to assign model-specific values to strings used in
    the EPP sysfs interface and make it do so on Meteor Lake (Srinivas
    Pandruvada).
 
  - Drop long-unused cpudata::prev_cummulative_iowait from the
    intel_pstate cpufreq driver (Jiri Slaby).
 
  - Prevent scaling_cur_freq from exceeding scaling_max_freq when the
    latter is an inefficient frequency (Shivnandan Kumar).
 
  - Change default transition delay in cpufreq to 2ms (Qais Yousef).
 
  - Remove references to 10ms minimum sampling rate from comments in the
    cpufreq code (Pierre Gondois).
 
  - Honour transition_latency over transition_delay_us in cpufreq (Qais
    Yousef).
 
  - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar).
 
  - General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
    Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
    Belova).
 
  - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan).
 
  - Make the SCMI cpufreq driver get a transition delay value from
    firmware (Pierre Gondois).
 
  - Prevent the haltpoll cpuidle governor from shrinking guest
    poll_limit_ns below grow_start (Parshuram Sangle).
 
  - Avoid potential overflow in integer multiplication when computing
    cpuidle state parameters (C Cheng).
 
  - Adjust MWAIT hint target C-state computation in the ACPI cpuidle
    driver and in intel_idle to return a correct value for C0 (He
    Rongguang).
 
  - Address multiple issues in the TPMI RAPL driver and add support for
    new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui).
 
  - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
    Lezcano).
 
  - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li).
 
  - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
    Norway Ananda).
 
  - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil).
 
  - Fix a couple of warnings in the OPP core code related to W=1
    builds (Viresh Kumar).
 
  - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
    Kumar).
 
  - Extend dev_pm_opp_data with turbo support (Sibi Sankar).
 
  - dt-bindings: drop maxItems from inner items (David Heidelberg).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmXvI/ISHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx24sP/jxg6fOGme8raHQvpTXG3/H56wlGzQ4P
 YUvvKUXnfD3yf1zNISsUl7VQebZqDt8rygkwSdymXlUVZX1eubN0RpCFc0F8GZuc
 THG/YQhYQr/9zro3FpKhfDj5evk21PCQzjf+dGvfQF9qVMxNPG1JzEFK6PnolT5X
 2BvkonY1XFWZjCMbZ83B/jt35lTDb0cmeNbCpfD5UJgcnxmMOtZYpORdyfPWTJpG
 GVCwmAFVVXxXlust/AIpt3mmOpKzSA9GnrtJkhtQe5GN+Y4OjnJiFJmTC7EfCctj
 JlWgVUA716mtFMUrjXgjfI54firF2oQpqaSa2HG/V/A96JWQqjarGz5dAV1IrPEt
 ZmYpvMe4E90S411wF1OWyrEqjXUuDnH1OWUvUdWSt4E7DhFw3esDi/jLW2tyVKAT
 hIy+/O4wzbDSTX/h9Cgt1Qjhew6lKUIwvhEXclB3fuJ+JoviWNkC9lnK93e2H0A3
 VYfkd/lpUD74035l0FrCJ/49MjX9kqrsn+TipHsIlSXAi8ZRdKbVvxOTD8RYudcI
 GvCiDDrkMgNwGlyedgbtTBUepCvSg93b+vVmRj7YMPtBhioOUo3qCn6wpqhxfnth
 9BCnPW7JxqUw/NJdlk9hKumaUZq+MK8G+kdYcIDg6xmAkWSUVP2QKlWavfMCxqRP
 +dN6T2iHsKFe
 =UePT
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "From the functional perspective, the most significant change here is
  the addition of support for Energy Models that can be updated
  dynamically at run time.

  There is also the addition of LZ4 compression support for hibernation,
  the new preferred core support in amd-pstate, new platforms support in
  the Intel RAPL driver, new model-specific EPP handling in intel_pstate
  and more.

  Apart from that, the cpufreq default transition delay is reduced from
  10 ms to 2 ms (along with some related adjustments), the system
  suspend statistics code undergoes a significant rework and there is a
  usual bunch of fixes and code cleanups all over.

  Specifics:

   - Allow the Energy Model to be updated dynamically (Lukasz Luba)

   - Add support for LZ4 compression algorithm to the hibernation image
     creation and loading code (Nikhil V)

   - Fix and clean up system suspend statistics collection (Rafael
     Wysocki)

   - Simplify device suspend and resume handling in the power management
     core code (Rafael Wysocki)

   - Fix PCI hibernation support description (Yiwei Lin)

   - Make hibernation take set_memory_ro() return values into account as
     appropriate (Christophe Leroy)

   - Set mem_sleep_current during kernel command line setup to avoid an
     ordering issue with handling it (Maulik Shah)

   - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
     driver's system suspend callback (Qingliang Li)

   - Simplify pm_runtime_get_if_active() usage and add a replacement for
     pm_runtime_put_autosuspend() (Sakari Ailus)

   - Add a tracepoint for runtime_status changes tracking (Vilas Bhat)

   - Fix section title markdown in the runtime PM documentation (Yiwei
     Lin)

   - Enable preferred core support in the amd-pstate cpufreq driver
     (Meng Li)

   - Fix min_perf assignment in amd_pstate_adjust_perf() and make the
     min/max limit perf values in amd-pstate always stay within the
     (highest perf, lowest perf) range (Tor Vic, Meng Li)

   - Allow intel_pstate to assign model-specific values to strings used
     in the EPP sysfs interface and make it do so on Meteor Lake
     (Srinivas Pandruvada)

   - Drop long-unused cpudata::prev_cummulative_iowait from the
     intel_pstate cpufreq driver (Jiri Slaby)

   - Prevent scaling_cur_freq from exceeding scaling_max_freq when the
     latter is an inefficient frequency (Shivnandan Kumar)

   - Change default transition delay in cpufreq to 2ms (Qais Yousef)

   - Remove references to 10ms minimum sampling rate from comments in
     the cpufreq code (Pierre Gondois)

   - Honour transition_latency over transition_delay_us in cpufreq (Qais
     Yousef)

   - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)

   - General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
     Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
     Belova)

   - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)

   - Make the SCMI cpufreq driver get a transition delay value from
     firmware (Pierre Gondois)

   - Prevent the haltpoll cpuidle governor from shrinking guest
     poll_limit_ns below grow_start (Parshuram Sangle)

   - Avoid potential overflow in integer multiplication when computing
     cpuidle state parameters (C Cheng)

   - Adjust MWAIT hint target C-state computation in the ACPI cpuidle
     driver and in intel_idle to return a correct value for C0 (He
     Rongguang)

   - Address multiple issues in the TPMI RAPL driver and add support for
     new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)

   - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
     Lezcano)

   - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)

   - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
     Norway Ananda)

   - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)

   - Fix a couple of warnings in the OPP core code related to W=1 builds
     (Viresh Kumar)

   - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
     Kumar)

   - Extend dev_pm_opp_data with turbo support (Sibi Sankar)

   - dt-bindings: drop maxItems from inner items (David Heidelberg)"

* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
  dt-bindings: opp: drop maxItems from inner items
  OPP: debugfs: Fix warning around icc_get_name()
  OPP: debugfs: Fix warning with W=1 builds
  cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
  OPP: Extend dev_pm_opp_data with turbo support
  Fix cpupower-frequency-info.1 man page typo
  cpufreq: scmi: Set transition_delay_us
  firmware: arm_scmi: Populate fast channel rate_limit
  firmware: arm_scmi: Populate perf commands rate_limit
  cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
  PM: sleep: wakeirq: fix wake irq warning in system suspend
  powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
  cpufreq: Don't unregister cpufreq cooling on CPU hotplug
  PM: suspend: Set mem_sleep_current during kernel command line setup
  cpufreq: Honour transition_latency over transition_delay_us
  cpufreq: Limit resolving a frequency to policy min/max
  Documentation: PM: Fix runtime_pm.rst markdown syntax
  cpufreq: amd-pstate: adjust min/max limit perf
  cpufreq: Remove references to 10ms min sampling rate
  cpufreq: intel_pstate: Update default EPPs for Meteor Lake
  ...
2024-03-13 11:40:06 -07:00
Rafael J. Wysocki
7874b581c7 Merge branch 'pm-runtime'
Merge changes related to the runtime power management of devices for
6.9-rc1:

 - Simplify pm_runtime_get_if_active() usage and add a replacement for
   pm_runtime_put_autosuspend() (Sakari Ailus).

 - Add a tracepoint for runtime_status changes tracking (Vilas Bhat).

 - Fix section title markdown in the runtime PM documentation (Yiwei
   Lin).

* pm-runtime:
  Documentation: PM: Fix runtime_pm.rst markdown syntax
  PM: runtime: add tracepoint for runtime_status changes
  PM: runtime: Add pm_runtime_put_autosuspend() replacement
  PM: runtime: Simplify pm_runtime_get_if_active() usage
2024-03-11 15:21:00 +01:00
Thomas Zimmermann
0475184905 Merge drm/drm-next into drm-misc-next
Backmerging to get drm-misc-next up to v6.8-rc6.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2024-02-26 14:20:50 +01:00
Daniel Vetter
f112b68f27 Linux 6.8-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXb0T4eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5YQH/3eCV90sNGch0Y94
 8rtTdqFrVx7QPNl0pz+Mo6OUIKUUHvTuwime16ckLxG+3x2Y3I0MjP1edd1NB99C
 Kje//JTpaZBPpTZ/jY4u8B1Shov2Drdx/J4NFnE/9rG6yXzKQBtvON/xAxXDCVHT
 mLhst2LR0FeCSMk9jAX6CoqUPEgwlylNyAetKxaDQgoHl4GTZC7FDO17WxyjpIxe
 1rVHsrV9Eq8kD4uxrzpTYWgZrwTObPmlZjvefa1JfzSwRNABIBJj/C1nra1Zc1oi
 b7xVaXS1cMOxrtuuG00fmHsPnWivu0tuND7H3/yLd1mRCZAPSsVbVvrI/KNtoeV4
 1euINlY=
 =7IFt
 -----END PGP SIGNATURE-----

Merge v6.8-rc6 into drm-next

Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2024-02-26 11:41:07 +01:00