Ensure that we do return errors from nfs4_proc_layoutget() and that we
don't mark the layout as having failed if the error was due to a
signal or resource problem on the client side.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
we have encountered a bug whereby reading a lot of files (copying
fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused
a general protection fault in xdr_shrink_bufhead. this function is
called when decoding the response from LAYOUTGET. the decoding is done
by a worker thread, and the caller of LAYOUTGET waits for the worker
thread to complete.
hitting Ctrl+C caused the synchronous wait to end and the next thing the
caller does is to free the pages, so when the worker thread calls
xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these
pages has been moved to nfs4_layoutget_release.
Signed-off-by: Idan Kedar <idank@tonian.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch exports symbols needed by the v4 module. In addition, I also
switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or
CONFIG_NFS_V4_MODULE are set.
The module (nfs4.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v4.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
mark_matching_lsegs_invalid() resets the mds_threshold counters and can
dereference the layout hdr on an initial empty plh_segs list. It returns 0 both
in the case of an initial empty list and in a non-emtpy list that was cleared
by calls to mark_lseg_invalid.
Don't send a LAYOUTRETURN if the list was initially empty.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When the file layout driver is fencing a DS, _pnfs_return_layout can be
called mulitple times per inode due to in-flight i/o referencing lsegs on it's
plh_segs list.
Remember that LAYOUTRETURN has been called, and do not call it again.
Allow LAYOUTRETURNs after a subsequent LAYOUTGET.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
pNFS needs to select a write function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing writes.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
pNFS needs to select a read function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing reads.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The call to try_module_get() dereferences ld_type outside the
spin locks, which means that it may be pointing to garbage if
a module unload was in progress.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently there is a 'chicken and egg' issue when the DS is also the mounted
MDS. The nfs_match_client() reference from nfs4_set_ds_client bumps the
cl_count, the nfs_client is not freed at umount, and nfs4_deviceid_purge_client
is not called to dereference the MDS usage of a deviceid which holds a
reference to the DS nfs_client. The result is the umount program returns,
but the nfs_client is not freed, and the cl_session hearbeat continues.
The MDS (and all other nfs mounts) lose their last nfs_client reference in
nfs_free_server when the last nfs_server (fsid) is umounted.
The file layout DS lose their last nfs_client reference in destroy_ds
when the last deviceid referencing the data server is put and destroy_ds is
called. This is triggered by a call to nfs4_deviceid_purge_client which
removes references to a pNFS deviceid used by an MDS mount.
The fix is to track how many pnfs enabled filesystems are mounted from
this server, and then to purge the device id cache once that count reaches
zero.
Reported-by: Jorge Mora <Jorge.Mora@netapp.com>
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Keep track of the number of bytes read or written via buffered, direct, and
mem-mapped i/o for use by mdsthreshold size_io hints.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The "invalid layout" class of errors is handled by destroying the layout and
getting a new layout from the server. Currently, the layout must be
destroyed before a new layout can be obtained.
This means that all references (e.g.lsegs) to the "to be destroyed" layout
header must be dropped before it can be destroyed. This in turn means waiting
for all in flight RPC's using the old layout as well as draining the data
server session slot table wait queue.
Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for
the old layout to be destroyed.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Let the MDS know that you are redirecting I/O from pNFS to MDS.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This prevents the use of any layout for i/o that references the deviceid.
I/O is redirected through the MDS.
Redirect the unhandled failed I/O to the MDS without marking either the
layout or the deviceid invalid.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the error handling for nfs_generic_pagein() into a single function.
Ditto for nfs_generic_flush().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
If the allocation of nfs_write_header fails, the list of nfs_pages that
needs to be cleaned up is still on desc->pg_list...
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Fred Isaman <iisaman@netapp.com>
The coalesce code made assumptions that will no longer be true once
non-page aligned io occurs. This introduces no change in
current behavior, but allows for more general situations to come.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Factors out the code that will need to change when directio
starts using these code paths. This will allow directio to use
the generic pagein and flush routines
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Decouple nfs_pgio_header and nfs_write_data, and have (possibly
multiple) nfs_write_datas each take a refcount on nfs_pgio_header.
For the moment keeps nfs_write_header as a way to preallocate a single
nfs_write_data with the nfs_pgio_header. The code doesn't need this,
and would be prettier without, but given the amount of churn I am
already introducing I didn't want to play with tuning new mempools.
This also fixes bug in pnfs_ld_handle_write_error. In the case of
desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing
replay attempt to do nothing.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Decouple nfs_pgio_header and nfs_read_data, and have (possibly
multiple) nfs_read_datas each take a refcount on nfs_pgio_header.
For the moment keeps nfs_read_header as a way to preallocate a single
nfs_read_data with the nfs_pgio_header. The code doesn't need this,
and would be prettier without, but given the amount of churn I am
already introducing I didn't want to play with tuning new mempools.
This also fixes bug in pnfs_ld_handle_read_error. In the case of
desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing
replay attempt to do nothing.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In order to avoid duplicating all the data in nfs_read_data whenever we
split it up into multiple RPC calls (either due to a short read result
or due to rsize < PAGE_SIZE), we split out the bits that are the same
per RPC call into a separate "header" structure.
The goal this patch moves towards is to have a single header
refcounted by several rpc_data structures. Thus, want to always refer
from rpc_data to the header, and not the other way. This patch comes
close to that ideal, but the directio code currently needs some
special casing, isolated in the nfs_direct_[read_write]hdr_release()
functions. This will be dealt with in a future patch.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The two functions had diverged quite a bit, with the write function
being a bit more robust than the read.
However, these still break badly in the desc->pg_bsize < PAGE_CACHE_SIZE case,
as then there is nothing hanging on the data->pages list, and the resend
ends up doing nothing. This will be fixed in a patch later in the series.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move more pnfs-isms out of the generic commit code.
Bugfixes:
- filelayout_scan_commit_lists doesn't need to get/put the lseg.
In fact since it is run under the inode->i_lock, the lseg_put()
can deadlock.
- Ensure that we distinguish between what needs to be done for
commit-to-data server and what needs to be done for commit-to-MDS
using the new flag PG_COMMIT_TO_DS. Otherwise we may end up calling
put_lseg() on a bucket for a struct nfs_page that got written
through the MDS.
- Fix a case where we were using list_del() on an nfs_page->wb_list
instead of list_del_init().
- filelayout_initiate_commit needs to call filelayout_commit_release
on error instead of the mds_ops->rpc_release(). Otherwise it won't
clear the commit lock.
Cleanups:
- Let the files layout manage the commit lists for the pNFS case.
Don't expose stuff like pnfs_choose_commit_list, and the fact
that the commit buckets hold references to the layout segment
in common code.
- Cast out the put_lseg() calls for the struct nfs_read/write_data->lseg
into the pNFS layer from whence they came.
- Let the pNFS layer manage the NFS_INO_PNFS_COMMIT bit.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
Replace the union with the common struct stateid4 as defined in both
RFC3530 and RFC5661. This makes it easier to access the sequence id,
which will again make implementing support for parallel OPEN calls
easier.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFS4CLNT_LAYOUTRECALL tests in pnfs_layout_process and
pnfs_update_layout are redundant.
In the case of a bulk layout recall, we're always testing for
the NFS_LAYOUT_BULK_RECALL flay anyway.
In the case of a file or segment recall, the call to
pnfs_set_layout_stateid() updates the layout_header 'barrier'
sequence id, which triggers the test in pnfs_layoutgets_blocked()
and is less race-prone than NFS4CLNT_LAYOUTRECALL anyway.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch addresses printks that have some context to show that they are
from fs/nfs/, but for the sake of consistency now start with NFS:
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We have no business doing any this in the standard write release path.
Get rid of it, and put it in the pNFS layer.
Also, while we're at it, get rid of the completely bogus unlock/relock
semantics that were present in nfs_writeback_release_full(). It is
not only unnecessary, but actually dangerous to release the write lock
just in order to take it again in nfs_page_async_flush(). Better just
to open code the pgio operations in a pnfs helper.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
As mandated by the standard. In case of an IO error, a pNFS
objects layout driver must return it's layout. This is because
all device errors are reported to the server as part of the
layout return buffer.
This is implemented the same way PNFS_LAYOUTRET_ON_SETATTR
is done, through a bit flag on the pnfs_layoutdriver_type->flags
member. The flag is set by the layout driver that wants a
layout_return preformed at pnfs_ld_{write,read}_done in case
of an error.
(Though I have not defined a wrapper like pnfs_ld_layoutret_on_setattr
because this code is never called outside of pnfs.c and pnfs IO
paths)
Without this patch 3.[0-2] Kernels leak memory and have an annoying
WARN_ON after every IO error utilizing the pnfs-obj driver.
[This patch is for 3.2 Kernel. 3.1/0 Kernels need a different patch]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Revert pnfs ugliness from the generic NFS read code path
SUNRPC: destroy freshly allocated transport in case of sockaddr init error
NFS: Fix a regression in the referral code
nfs: move nfs_file_operations declaration to bottom of file.c (try #2)
nfs: when attempting to open a directory, fall back on normal lookup (try #5)
pNFS-specific code belongs in the pnfs layer. It should not be
hijacking generic NFS read or write code paths.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
Revert "tracing: Include module.h in define_trace.h"
irq: don't put module.h into irq.h for tracking irqgen modules.
bluetooth: macroize two small inlines to avoid module.h
ip_vs.h: fix implicit use of module_get/module_put from module.h
nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
include: replace linux/module.h with "struct module" wherever possible
include: convert various register fcns to macros to avoid include chaining
crypto.h: remove unused crypto_tfm_alg_modname() inline
uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
pm_runtime.h: explicitly requires notifier.h
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
miscdevice.h: fix up implicit use of lists and types
stop_machine.h: fix implicit use of smp.h for smp_processor_id
of: fix implicit use of errno.h in include/linux/of.h
of_platform.h: delete needless include <linux/module.h>
acpi: remove module.h include from platform/aclinux.h
miscdevice.h: delete unnecessary inclusion of module.h
device_cgroup.h: delete needless include <linux/module.h>
net: sch_generic remove redundant use of <linux/module.h>
net: inet_timewait_sock doesnt need <linux/module.h>
...
Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
- drivers/media/dvb/frontends/dibx000_common.c
- drivers/media/video/{mt9m111.c,ov6650.c}
- drivers/mfd/ab3550-core.c
- include/linux/dmaengine.h
Some files were using the complete module.h infrastructure without
actually including the header at all. Fix them up in advance so
once the implicit presence is removed, we won't get failures like this:
CC [M] fs/nfsd/nfssvc.o
fs/nfsd/nfssvc.c: In function 'nfsd_create_serv':
fs/nfsd/nfssvc.c:335: error: 'THIS_MODULE' undeclared (first use in this function)
fs/nfsd/nfssvc.c:335: error: (Each undeclared identifier is reported only once
fs/nfsd/nfssvc.c:335: error: for each function it appears in.)
fs/nfsd/nfssvc.c: In function 'nfsd':
fs/nfsd/nfssvc.c:555: error: implicit declaration of function 'module_put_and_exit'
make[3]: *** [fs/nfsd/nfssvc.o] Error 1
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Current pnfs_layoutcommit_inode can not handle parallel layoutcommit.
And as Trond suggested , there is no need for client to optimize for
parallel layoutcommit. So add NFS_INO_LAYOUTCOMMITTING flag to
mark inflight layoutcommit and serialize lalyoutcommit with it.
Also mark_inode_dirty_sync if pnfs_layoutcommit_inode fails to issue
layoutcommit.
Reported-by: Vitaliy Gusev <gusev.vitaliy@nexenta.com>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to
mds.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to
mds.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
file layout and block layout both use it to set mark layout io failure
bit. So make it generic.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This gives layout driver a chance to cleanup structures they put in at
encode_layoutcommit.
Signed-off-by: Andy Adamson <andros@netapp.com>
[fixup layout header pointer for layoutcommit]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To allow layout driver to issue getdevicelist at mount time, and clean up
at umount time.
[fixup non NFS_V4_1 set_pnfs_layoutdriver definition]
[pnfs: pass mntfh down the init_pnfs path]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There can be multiple lseg per file, so layoutcommit should be
able to handle it.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
No need to save it for every lseg.
No need to save it at every pnfs_set_layoutcommit.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
No need to save it for every lseg.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use nfs_pageio_reset_read_mds and nfs_pageio_reset_write_mds instead of
completely reinitialising the struct nfs_pageio_descriptor.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
...and ensure that we recoalese to take into account differences in
differences in block sizes when falling back to write through the MDS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
