Commit Graph

908 Commits

Author SHA1 Message Date
Ewan D. Milne
279afdfe78 [SCSI] Generate uevents on certain unit attention codes
Generate a uevent when the following Unit Attention ASC/ASCQ
codes are received:

    2A/01  MODE PARAMETERS CHANGED
    2A/09  CAPACITY DATA HAS CHANGED
    38/07  THIN PROVISIONING SOFT THRESHOLD REACHED
    3F/03  INQUIRY DATA HAS CHANGED
    3F/0E  REPORTED LUNS DATA HAS CHANGED

Log kernel messages when the following Unit Attention ASC/ASCQ
codes are received that are not as specific as those above:

    2A/xx  PARAMETERS CHANGED
    3F/xx  TARGET OPERATING CONDITIONS HAVE CHANGED

Added logic to set expecting_lun_change for other LUNs on the target
after REPORTED LUNS DATA HAS CHANGED is received, so that duplicate
uevents are not generated, and clear expecting_lun_change when a
REPORT LUNS command completes, in accordance with the SPC-3
specification regarding reporting of the 3F 0E ASC/ASCQ UA.

[jejb: remove SPC3 test in scsi_report_lun_change and some docbook fixes and
       unused variable fix, both reported by Fengguang Wu]
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-26 18:52:27 +04:00
Adheer Chandravanshi
f8525eb4cf [SCSI] libiscsi: Exporting new attrs for iscsi session and connection in sysfs
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23 13:10:16 -04:00
Adheer Chandravanshi
ae542edb11 [SCSI] scsi_transport_iscsi: Exporting new attrs for iscsi session and connection in sysfs
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23 13:08:30 -04:00
Hannes Reinecke
7e782af576 [SCSI] Return ENODATA on medium error
When a medium error is detected the SCSI stack should return
ENODATA to the upper layers.

[jejb: fix whitespace error]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23 12:54:53 -04:00
Hannes Reinecke
a9d6ceb838 [SCSI] return ENOSPC on thin provisioning failure
When the thin provisioning hard threshold is reached we
should return ENOSPC to inform upper layers about this fact.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23 12:43:54 -04:00
Hannes Reinecke
87f14e658f [SCSI] Set hostbyte status in scsi_check_sense()
We should be modifying the host_byte status in scsi_check_sense()
directly; this saves us to introduce a special return code for
each and every condition.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23 12:34:56 -04:00
Eddie Wai
3b9373e95a [SCSI] libiscsi: Added new boot entries in the session sysfs
This is the kernel part of the modification to extract the net params
from the ibft sysfs to the iface struct used for the connection
request upon sync_session in the open-iscsi util.

Three new session sysfs params are defined:
boot_root - holds the name of the /sys/firmware/ibft or iscsi_rootN
boot_nic  - holds the ethernetN name
boot_target - holds the targetN name

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26 18:04:11 -07:00
Martin K. Petersen
56f2a8016e [SCSI] Workaround for disks that report bad optimal transfer length
Not all disks fill out the VPD pages correctly. Add a blacklist flag
that allows us ignore the SBC-3 VPD pages for a given device. The
BLIST_SKIP_VPD_PAGES flag triggers our existing skip_vpd_pages
scsi_device parameter to bypass VPD scanning.

Also blacklist the offending Seagate drive model.

Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24 13:00:10 -07:00
Martin K. Petersen
0816c9251a [SCSI] Allow error handling timeout to be specified
Introduce eh_timeout which can be used for error handling purposes. This
was previously hardcoded to 10 seconds in the SCSI error handling
code. However, for some fast-fail scenarios it is necessary to be able
to tune this as it can take several iterations (bus device, target, bus,
controller) before we give up.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-04 11:16:24 -07:00
James Bottomley
e73823f7a2 [SCSI] libsas: implement > 16 byte CDB support
Remove the arbitrary expectation in libsas that all SCSI commands are 16 bytes
or less.  Instead do all copies via cmd->cmd_len (and use a pointer to this in
the libsas task instead of a copy).  Note that this still doesn't enable > 16
byte CDB support in the underlying drivers because their internal format has
to be fixed and the wire format of > 16 byte CDBs according to the SAS spec is
different.  the libsas drivers (isci, aic94xx, mvsas and pm8xxx are all
updated for this change.

Cc: Lukasz Dorau <lukasz.dorau@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jack Wang <xjtuwjp@gmail.com>
Cc: Lindar Liu <lindar_liu@usish.com>
Cc: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-04 11:15:59 -07:00
James Bottomley
297b8a0734 Merge branch 'postmerge' into for-linus
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10 07:54:01 -07:00
James Bottomley
832e77bc11 Merge branch 'misc' into for-linus
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10 07:53:40 -07:00
Mike Christie
8526cb114f [SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used
This fixes a bug where the iscsi class/driver did not do a put_device
when a sess/conn device was found. This also simplifies the interface
by not having to pass in some arguments that were duplicated and did
not need to be exported.

Reported-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10 07:47:53 -07:00
James Bottomley
aa9f8328fc [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
These enums have been separate since the dawn of SAS, mainly because the
latter is a procotol only enum and the former includes additional state
for libsas.  The dichotomy causes endless confusion about which one you
should use where and leads to pointless warnings like this:

drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo':
drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare]

Fix by eliminating one of them.  The one kept is effectively the sas.h
one, but call it sas_device_type and make sure the enums are all
properly namespaced with the SAS_ prefix.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10 07:47:52 -07:00
Lin Ming
9b21493c45 [SCSI] sd: use REQ_PM in sd's runtime suspend operation
With the introduction of REQ_PM, modify sd's runtime suspend operation
functions to use that flag so that the operations to put the device into
runtime suspended state(i.e. sync cache and stop device) will not affect
its runtime PM status.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-06 12:48:17 -07:00
Dan Carpenter
631d706e68 [SCSI] libosd: remover duplicate __bitwise annotation
__be32 is already a __bitwise type so we don't need the second __bitwise
here.  It causes a Sparse error:
include/scsi/osd_protocol.h:110:26: error: invalid modifier

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02 12:15:10 -07:00
Linus Torvalds
20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
Linus Torvalds
5f56886521 Merge branch 'akpm' (incoming from Andrew)
Merge third batch of fixes from Andrew Morton:
 "Most of the rest.  I still have two large patchsets against AIO and
  IPC, but they're a bit stuck behind other trees and I'm about to
  vanish for six days.

   - random fixlets
   - inotify
   - more of the MM queue
   - show_stack() cleanups
   - DMI update
   - kthread/workqueue things
   - compat cleanups
   - epoll udpates
   - binfmt updates
   - nilfs2
   - hfs
   - hfsplus
   - ptrace
   - kmod
   - coredump
   - kexec
   - rbtree
   - pids
   - pidns
   - pps
   - semaphore tweaks
   - some w1 patches
   - relay updates
   - core Kconfig changes
   - sysrq tweaks"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits)
  Documentation/sysrq: fix inconstistent help message of sysrq key
  ethernet/emac/sysrq: fix inconstistent help message of sysrq key
  sparc/sysrq: fix inconstistent help message of sysrq key
  powerpc/xmon/sysrq: fix inconstistent help message of sysrq key
  ARM/etm/sysrq: fix inconstistent help message of sysrq key
  power/sysrq: fix inconstistent help message of sysrq key
  kgdb/sysrq: fix inconstistent help message of sysrq key
  lib/decompress.c: fix initconst
  notifier-error-inject: fix module names in Kconfig
  kernel/sys.c: make prctl(PR_SET_MM) generally available
  UAPI: remove empty Kbuild files
  menuconfig: print more info for symbol without prompts
  init/Kconfig: re-order CONFIG_EXPERT options to fix menuconfig display
  kconfig menu: move Virtualization drivers near other virtualization options
  Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
  relay: use macro PAGE_ALIGN instead of FIX_SIZE
  kernel/relay.c: move FIX_SIZE macro into relay.c
  kernel/relay.c: remove unused function argument actor
  drivers/w1/slaves/w1_ds2760.c: fix the error handling in w1_ds2760_add_slave()
  drivers/w1/slaves/w1_ds2781.c: fix the error handling in w1_ds2781_add_slave()
  ...
2013-04-30 17:37:43 -07:00
David Howells
22145aa1f6 UAPI: remove empty Kbuild files
Remove empty Kbuild files as they cause problems with the patch program which
removes files that become empty.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:09 -07:00
Adheer Chandravanshi
2902eb495d [SCSI] scsi_transport_iscsi: Declare portal type string macros for generic use
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-11 15:34:33 -07:00
Adheer Chandravanshi
adaf6990dd [SCSI] libiscsi: export function iscsi_switch_str_param
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-11 15:26:48 -07:00
Adheer Chandravanshi
c6a4bb2ef5 [SCSI] scsi_transport_iscsi: Add flash node mgmt support
This patch allows iscsiadm to manage iSCSI target information stored on
adapter flash on per host basis.

The sysfs entries will look as cited below:
	/sys/bus/iscsi_flashnode/devices/flashnode_sess-<host_no>:<flashnode_id>/<session attrs>
	/sys/bus/iscsi_flashnode/devices/flashnode_conn-<host_no>:<flashnode_id>:<conn_id>/<conn attrs>

Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com>
Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-11 15:19:35 -07:00
Al Viro
70ef457dc9 scsi: bury ->proc_info()
all users converted to ->show_info()/->write_info()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:29 -04:00
Al Viro
0ffddfbb83 scsi: saner replacements for ->proc_info()
It's still an obsolete interface; don't introduce those in new drivers.
However, it's saner than the ->proc_info() and commits after this one
will convert the existing ->proc_info() users to it.

The read side is ->show_info(seq_file *, struct Scsi_Host *); use
seq_... for generating contents.

The write side is ->write_info(struct Scsi_Host *, char *, int).

Again, this is driven by procfs needs; we are going to kill ->write_proc()
and ->read_proc() and this is the main obstacle to burying that piece of
shit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:14 -04:00
Robert Love
0807619d3c libfc, fcoe, bnx2fc: Split fc_disc_init into fc_disc_{init, config}
Split discovery initialization in code that is setup once (fcoe_disc_init)
and code that can be re-configured (fcoe_disc_config).

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Jack Morgan <jack.morgan@intel.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25 16:03:03 -07:00
Robert Love
8a9a713812 libfc, fcoe, bnx2fc: Always use fcoe_disc_init for discovery layer initialization
Currently libfcoe is doing some libfc discovery layer initialization outside of
libfc. This patch moves this code into libfc and sets up a split in discovery
(one time) initialization code and (re-configurable) settings that will come in
the next patch.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Jack Morgan <jack.morgan@intel.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25 16:01:10 -07:00
Linus Torvalds
426d266c12 SCSI for-linus on 20130301
This is an assorted set of stragglers into the merge window with driver
 updates for qla2xxx, megaraid_sas, storvsc and ufs.  It also includes pulls of
 the uapi tree (all the remaining SCSI pieces) and the fcoe tree (updates to
 fcoe and libfc)
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRMHJHAAoJEDeqqVYsXL0M9tAH/2YG3TCfy0RFAejGgLfX9OGH
 6eFe71m7Z8nfIEneAnm5BuKjCx3QFRp5UFjJZdFHLP1Qv0TbpKs4FnZyeSGTxLQp
 S1fZc5sTWmsb5qYxLaukKopC6sFx+hNI2dvB+rgKcd+nWy1RzG7lGqbS4CRNE76q
 UNByqlfqJxn5cfQw7dg2zOUKlGaGL2jSyFf0QFXR2IZzO33PeyBPfKDFeJC6b+oc
 XTy9MK9V5u6ne3XimDTU2hP4lPAsZaJtcqsv1Gvv2y+BHalQiPqfL6bZMvN3Zbfq
 hfT+i2xnYy85858gxtyIhzHwU14zF7I0HEWiVpddsF9NDK7iNKvK8aWHaTs7qis=
 =hvGQ
 -----END PGP SIGNATURE-----

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is an assorted set of stragglers into the merge window with
  driver updates for qla2xxx, megaraid_sas, storvsc and ufs.

  It also includes pulls of the uapi tree (all the remaining SCSI
  pieces) and the fcoe tree (updates to fcoe and libfc)"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (81 commits)
  [SCSI] ufs: Separate PCI code into glue driver
  [SCSI] ufs: Segregate PCI Specific Code
  [SCSI] scsi: fix lpfc build when wmb() is defined as mb()
  [SCSI] storvsc: Handle dynamic resizing of the device
  [SCSI] storvsc: Restructure error handling code on command completion
  [SCSI] storvsc: avoid usage of WRITE_SAME
  [SCSI] aacraid: suppress two GCC warnings
  [SCSI] hpsa: check for dma_mapping_error in hpsa_passthru ioctls
  [SCSI] hpsa: reorganize error handling in hpsa_passthru_ioctl
  [SCSI] hpsa: check for dma_mapping_error in hpsa_map_sg_chain_block
  [SCSI] hpsa: Check for dma_mapping_error for all code paths using fill_cmd
  [SCSI] hpsa: Check for dma_mapping_error in hpsa_map_one
  [SCSI] dc395x: uninitialized variable in device_alloc()
  [SCSI] Fix range check in scsi_host_dif_capable()
  [SCSI] storvsc: Initialize the sglist
  [SCSI] mpt2sas: Add support for OEM specific controller
  [SCSI] ipr: Fix oops while resetting an ipr adapter
  [SCSI] fnic: Fnic Trace Utility
  [SCSI] fnic: New debug flags and debug log messages
  [SCSI] fnic: fnic driver may hit BUG_ON on device reset
  ...
2013-03-02 11:42:16 -08:00
James Bottomley
3e34c1fc2b FCoE Updates for 3.9
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRI992AAoJEEajxTw9cn4HCAcQAI0yWjsDYkTZUAN3vcU7Xh83
 e1Qt1dAWjY+sFspo54p4ndK7gkBQzBlzIPf1MdcTQOSBWSA2QYnvukpZuRm99OjH
 /60xky0TgGtvGUbNgCRG9zhrPQ+/rTvuenZrZa9ibWeIMM8RgyWBV76REDyetd3b
 K6q2Cz75MKDZwgwJpp7FPF7SJYQVgVbhbVJFIvN5rtS2xEUZI7Ltj/stW0QoJfkD
 R1XAlGCJETV+pzG0VY7aycxCGhN3HM7QYiA1EiKCfBkLzfFosf+oozWTgIkLm1PE
 UKO8b6RNR0d7BHXBkIgP0C18Wx9BrLWS5woNoiDANBK3FTJIgL/D32tiJJXhLFGP
 zzY4OXDT0OEUsn1oc8ldI5/LqALdvDJGzUBbiA1wTiXsJyHVAsBajJc3pP9btnom
 Z91xB4nRLQx/doJqaKOZiQJRCSeG7b/lQM06jOEHFAO7Ah9sRSqbelHd1+tmSV6J
 NfDhkZsi5rPZ9My23J5Nkcfy4Vi8hpyqNC0KZR7PTUYJwi1LrTKRSTkek53b5K3O
 Ee7ZtQ1cY3v90QuG2bNieWaLUKINX/nTKF5DIKH1l9dfxmcpHystPpjRZ06D5wUY
 vsH+9wNAq0v6+tAT8yvoc5qrZb2OEO/xkgCNIN8c5pNGiw0hjeXzhg5bZBGjNmGK
 ixtSPIR5QoaU1XFq62JH
 =r8PC
 -----END PGP SIGNATURE-----

[SCSI] Merge tag 'fcoe-02-19-13' into for-linus

FCoE Updates for 3.9

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-03-01 09:10:08 +00:00
James Bottomley
c157750a90 UAPI Disintegration 2012-12-19
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUNHsNROxKuMESys7AQI4IQ/+JPKimJOyp3uMp2IJxUeXEaBb/6dgE7Nc
 6zonRbFY/Mr/RvpokzZCSSncIGo7o+TlnWLK8tuAc69wsliAA4z7KdesxCheFFl9
 dZtoSxuPlD9CvVIZQoL8JeA1PDtdMnDekbeEvtxXDq/Xkogiur3/UuuEaV045vnY
 7x044iLBKb+wEM675oF+KypwnGg6jOybCwe3KywdfzqHNz6e3ZOfsJgd4/Wx8Bo4
 tPQo2VvlZ79oqjluCgDH/UOGAHGSSqJ9T2z3JH0aTEzWn+dPeGlFFAcsrTkZDQEN
 0zGFKq8rnPb54Q1wUNI0haUyx1Bwteima5cAEoE4Gnr+ui3PKmlZ1ueTsJQN8eFY
 aij4NKHCUiPxl2Edbu+dFEizZy3VEwrn72OJPYOZVfMku4fD0ghvg9rASXf8xzt6
 hkL22F6vecMlg1XA5C8DZNGMYEth3S+lBYKY0rhii/6End+QhVZuxDSfGYnc47Fk
 aI16tI0by1RL0PGg+P8PnrjqX+R8wQ3s6YlQrqVGgbZOdAeO1qu3swoCKmCGSGZj
 giU1vpZcxAlyynNVsqOwgHI1VMbmWSVv5wW3AMRH/a837Hj+YilOXekpMB1wQRw3
 n1PReGvFgZxQNuNtbovgeXTn6AtRGA43QCAvtqJLeQ9CxVbPJc7DCe+2Xp4oIU0f
 6lhKaokc5P8=
 =12jb
 -----END PGP SIGNATURE-----

Merge tag 'uapi-20121219' into for-linus

UAPI Disintegration 2012-12-19

This is the remaining SCSI part of the UAPI

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-03-01 09:08:44 +00:00
Martin K. Petersen
4d24834dfd [SCSI] Fix range check in scsi_host_dif_capable()
The range checking from fe542396 was bad. We would still end up walking
beyond the array as Type 3 is defined to be 4 in the protection
bitmask. Instead use ARRAY_SIZE() for the range check.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24 09:26:18 +00:00
Aaron Lu
44ec657be0 [SCSI] remove can_power_off flag from scsi_device
Commit 166a2967b4 "libata: tell scsi layer
device supports runtime power off" introduced the can_power_off flag for
scsi_device and is used to support ZPODD implementation in SCSI layer.
Since ZPODD is now implemented in ATA layer, that flag is no longer
needed, so remove it.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-25 15:36:50 -05:00
Aaron Lu
6f4c827e68 [libata] scsi: no poll when ODD is powered off
When the ODD is powered off, any action the user did to the ODD that
would generate a media event will trigger an ACPI interrupt, so the
poll for media event is no longer necessary. And the poll will also
cause a runtime status change, which will stop the ODD from staying in
powered off state, so the poll should better be stopped.

But since we don't have access to the gendisk structure in LLDs, here
comes the disk_events_disable_depth for scsi device. This field is a
hint set by LLDs to convey information to upper layer drivers. A value
of 0 means media poll is necessary for the device, while values above 0
means media poll is not needed and should better be skipped. So we can
increase its value when we are to power off the ODD in ATA layer and
decrease its value when the ODD is powered on, effectively silence the
media events poll.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-25 15:36:43 -05:00
David Howells
cf02820041 UAPI: (Scripted) Disintegrate include/scsi/fc
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2013-01-07 14:58:36 -08:00
David Howells
ee7afd717c UAPI: (Scripted) Disintegrate include/scsi
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
2012-12-19 16:07:23 +00:00
Yi Zou
57c2728fa8 libfcoe, fcoe: consolidate the fcoe_ctlr_get_lesb/fcoe_get_lesb
Similarly they can be moved into libfcoe instead of being private to fcoe now.
Also add comments particularly on the term LESB to the corresponding function.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14 10:38:55 -08:00
Yi Zou
03702689fc libfcoe, fcoe: move fcoe_link_speed_update() to libfcoe and export it
With the previous patch, fcoe_link_speed_update() can be moved into libfcoe and
exported to used by fcoe, bnx2fc, and etc.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14 10:38:55 -08:00
Yi Zou
66524ec9d0 fcoe: add support to the get_netdev() for fcoe_interface
Adds support to fcoe_port's newly added get_netdev fucntion pointer.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14 10:38:55 -08:00
Yi Zou
8106fb4790 fcoe: prep work to start consolidate the usage of fcoe_netdev
Currently, in the default kernel fcoe driver, it is needed to get to the underlying
private per fcoe transport's private structure, e.g., fcoe_interface in
fcoe.ko, and returns the associated netdev. The similar logic exists in other
fcoe drivers, e.g., bnx2fc, so we add a function pointer into the common
fcoe_port struct to allow individual fcoe transport implementaion (fcoe
and bnx2fc) to get the corresponding netdev associated with a give lport.

Then a inline fcoe_get_netdev() is added as part of libfcoe for all underlying
fcoe transport drivers to use regardless of its individual fcoe transport
driver, and also allows move more common code such as fcoe_link_speed_update or
fcoe_ctlr_get_lesb to be in libfcoe, rather than specific to fcoe.

This patch is a prep work that adds aforementioned fucntion pointer, and
followed by the actual code changes to make use of it.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14 10:38:55 -08:00
Robert Love
6a891b071b libfcoe, fcoe, bnx2fc: Add new fcoe control interface
This patch does a few things.

1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces.
   These interfaces take an <ifname> and will either
   create an FCoE Controller or destroy an FCoE
   Controller depending on which file is written to.

   The new FCoE Controller will start in a DISABLED
   state and will not do discovery or login until it
   is ENABLED. This pause will allow us to configure
   the FCoE Controller before enabling it.

2) Makes the 'mode' attribute of a fcoe_ctlr_device
   writale. This allows the user to configure the mode
   in which the FCoE Controller will start in when it
   is ENABLED.

   Possible modes are 'Fabric', or 'VN2VN'.

   The default mode for a fcoe_ctlr{,_device} is 'Fabric'.
   Drivers must implement the set_fcoe_ctlr_mode routine
   to support this feature.

   libfcoe offers an exported routine to set a FCoE
   Controller's mode. The mode can only be changed
   when the FCoE Controller is DISABLED.

   This patch also removes the get_fcoe_ctlr_mode pointer
   in the fcoe_sysfs function template, the code in
   fcoe_ctlr.c to get the mode and the assignment of
   the fcoe_sysfs function pointer to the fcoe_ctlr.c
   implementation (in fcoe and bnx2fc). fcoe_sysfs can
   return that value for the mode without consulting the
   LLD.

3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a
   read, fcoe_sysfs will return the attribute's value. On
   a write, fcoe_sysfs will call the LLD (if there is a
   callback) to notifiy that the enalbed state has changed.

This patch maintains the old FCoE control interfaces as
module parameters, but it adds comments pointing out that
the old interfaces are deprecated.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-12-14 10:38:54 -08:00
Linus Torvalds
e777d192ff SCSI misc on 20121212
This patch set includes two large new drivers: mpt3sas (for the next gen
 fusion SAS hardware) and csiostor a FCoE offload driver for the Chelsio
 converged network cards (this includes some net changes which I've OK'd with
 DaveM).
 
 The rest of the patch is driver updates (qla2xxx, lpfc, hptiop, be2iscsi) plus
 a few assorted updates and bug fixes.
 
 We also have a Power Management rework in the Upper Layer Drivers preparatory
 to doing ACPI zero power optical devices, but the actual enabler is still
 being worked on.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJQyE9RAAoJEDeqqVYsXL0Mf2oIAL+B2R7hM4RhZrVI0dq1x+og
 o/B4JOnDXC7gFJTJXRjejEuAqmJRN7O1mxFV9sEo/zRa++Sd9YVPwQlcCFdesw0a
 xU8aCAcy9hLlTcDK2pwhKN6i/anyIvl1Qec/574y9UhFxUsQz+7G9IvT7UmBqaYt
 zVTvd4zX4ZHRBIyMTNzkSLGUHcJzKeMOrTFekJwQNDQpHXPJknOCqNiokhLPv0ET
 Cl1JZS/jlF7g4FcePhmYyL/nGHfXp1/WYKneDVT7PFWNJc2RPTBDP3PfdN4mBJfc
 bQXl/vRLtAjYDpHUJ4IKJbdtfFLkm4KS9ET3kwTkpZ2K6U3c9NklmBK3or2Vo1I=
 =Gw2O
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "This patch set includes two large new drivers: mpt3sas (for the next
  gen fusion SAS hardware) and csiostor a FCoE offload driver for the
  Chelsio converged network cards (this includes some net changes which
  I've OK'd with DaveM).

  The rest of the patch is driver updates (qla2xxx, lpfc, hptiop,
  be2iscsi) plus a few assorted updates and bug fixes.

  We also have a Power Management rework in the Upper Layer Drivers
  preparatory to doing ACPI zero power optical devices, but the actual
  enabler is still being worked on.

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (72 commits)
  [SCSI] mpt3sas: add new driver supporting 12GB SAS
  [SCSI] scsi_transport_sas: add 12GB definitions for mpt3sas
  [SCSI] miscdevice: Adding support for MPT3SAS_MINOR(222)
  [SCSI] csiostor: remove unneeded memset()
  [SCSI] csiostor: Fix sparse warnings.
  [SCSI] qla2xxx: Display that driver is operating in legacy interrupt mode.
  [SCSI] qla2xxx: Dont clear drv active on iospace config failure.
  [SCSI] qla2xxx: Fix typo in qla2xxx driver.
  [SCSI] qla2xxx: Update ql2xextended_error_logging parameter description with new option.
  [SCSI] qla2xxx: Parameterize the link speed of hba rather than fcport.
  [SCSI] qla2xxx: Add 16Gb/s case to get port speed capability.
  [SCSI] qla2xxx: Move marking fcport online ahead of setting iiDMA speed.
  [SCSI] qla2xxx: Add acquiring of risc semaphore before doing ISP reset.
  [SCSI] qla2xxx: Ignore driver ack bit if corresponding presence bit is not set.
  [SCSI] qla2xxx: Fix typo in qla83xx_fw_dump function.
  [SCSI] qla2xxx: Add Gen3 PCIe speed 8GT/s to the log message.
  [SCSI] qla2xxx: Use correct Request-Q-Out register during bidirectional request processing
  [SCSI] qla2xxx: Move noisy Start scsi failed messages to verbose logging level.
  [SCSI] qla2xxx: Fix coccinelle warnings in qla2x00_relogin.
  [SCSI] qla2xxx: No fcport FC-4 type assignment in GA_NXT response.
  ...
2012-12-13 19:20:31 -08:00
Linus Torvalds
f132c54e3a First batch of InfiniBand/RDMA changes for the 3.8 merge window:
- A good chunk of Bart Van Assche's SRP fixes
  - UAPI disintegration from David Howells
  - mlx4 support for "64-byte CQE" hardware feature from Or Gerlitz
  - Other miscellaneous fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJQxstjAAoJEENa44ZhAt0hURUQAJd7HumReKTdRqzIzXPc+rgl
 pRR5eqplPY2anfJMqLDiFphVjfCiKyhudomdo+RUbBFFnUVLlBzk80A0/IZ3g3PZ
 MHOT+pX4PGDd+3FQxV2AaQCMwgGbvC0haInXyQDVZGm0fbMjRd699yGVWBiA8rOI
 VNhUi5WMmynSINYokM8UxrhfoUfy3QxsOvZBZ3XUD1zjJB0IMd5HRdiDUG7ur0q+
 rfpWKv51DXT81ux36MXbdPBhLRbzx4B7EwuPWOFPqJe1KwK2cD8iA6DwEKC9KMxS
 Kj2+CxB5Bfpfz8bhLi2VZcMgAKiSIQDXUtiKz8h0yFVhvADYZLU7zdGN49mCqKcY
 9dwX8+0aIVez6WB2jH+ir2FSG65NsnvqESwQ4LLQ9bhArgf9fapVGlypHwcKi5hh
 3j2ipO/RyT56nLQeI0gz1P5mQneFSWlY96CD8WP+9OxO/mVnxViajzevSwT/cLE6
 IOMks8DPhsQK88JXSx0XKVxn3zrJ9SXbYDhRWJ6f4w/fxraRXlFdQi0UfcsAajkX
 5qmM4e8Oy97TJYiY1RkAmb7aV182xMWVjtDx2FFTQ5ukgDea/DklIM/JNQ475027
 N7zMW1tP6+gnnDyMEkteVuPdbl1fzwI3RdXCh0mFZHZ5tvegkdxbw0XxERcevnQN
 LZfME8wCuC7+RtmE38Li
 =TQK2
 -----END PGP SIGNATURE-----

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

Pull infiniband upate from Roland Dreier:
 "First batch of InfiniBand/RDMA changes for the 3.8 merge window:
   - A good chunk of Bart Van Assche's SRP fixes
   - UAPI disintegration from David Howells
   - mlx4 support for "64-byte CQE" hardware feature from Or Gerlitz
   - Other miscellaneous fixes"

Fix up trivial conflict in mellanox/mlx4 driver.

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (33 commits)
  RDMA/nes: Fix for crash when registering zero length MR for CQ
  RDMA/nes: Fix for terminate timer crash
  RDMA/nes: Fix for BUG_ON due to adding already-pending timer
  IB/srp: Allow SRP disconnect through sysfs
  srp_transport: Document sysfs attributes
  srp_transport: Simplify attribute initialization code
  srp_transport: Fix attribute registration
  IB/srp: Document sysfs attributes
  IB/srp: send disconnect request without waiting for CM timewait exit
  IB/srp: destroy and recreate QP and CQs when reconnecting
  IB/srp: Eliminate state SRP_TARGET_DEAD
  IB/srp: Introduce the helper function srp_remove_target()
  IB/srp: Suppress superfluous error messages
  IB/srp: Process all error completions
  IB/srp: Introduce srp_handle_qp_err()
  IB/srp: Simplify SCSI error handling
  IB/srp: Keep processing commands during host removal
  IB/srp: Eliminate state SRP_TARGET_CONNECTING
  IB/srp: Increase block layer timeout
  RDMA/cm: Change return value from find_gid_port()
  ...
2012-12-13 19:19:09 -08:00
Sreekanth Reddy
d84fd392bd [SCSI] scsi_transport_sas: add 12GB definitions for mpt3sas
[jejb: split this core change into a separate patch]
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-12-01 10:08:41 +00:00
Bart Van Assche
dc1bdbd9b8 IB/srp: Allow SRP disconnect through sysfs
Make it possible to disconnect the IB RC connection used by the SRP
protocol to communicate with a target.

Have the SRP transport layer create a sysfs "delete" attribute for
initiator drivers that support this functionality.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-30 17:40:33 -08:00
Jason J. Herne
53ad570be6 [SCSI] sd: Use SCSI read/write(16) with > 32-bit LBA drives
Force large capacity (> 0xFFFFFFFF blocks) drives to use READ/WRITE(16) instead
of READ/WRITE(10). Some(most/all?) USB enclosures do not like READ(10) commands
when a large capacity drive is installed. This issue was reported and discussed
here: http://marc.info/?l=linux-usb&m=135247705222324

Signed-off-by: Jason J. Herne <hernejj@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-27 09:00:38 +04:00
Martin K. Petersen
5db44863b6 [SCSI] sd: Implement support for WRITE SAME
Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk
driver.

 - We set the default maximum to 0xFFFF because there are several
   devices out there that only support two-byte block counts even with
   WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the
   device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK
   LIMITS VPD.

 - max_write_same_blocks can be overriden per-device basis in sysfs.

 - The UNMAP discovery heuristics remain unchanged but the discard
   limits are tweaked to match the "real" WRITE SAME commands.

 - In the error handling logic we now distinguish between WRITE SAME
   with and without UNMAP set.

The discovery process heuristics are:

 - If the device reports a SCSI level of SPC-3 or greater we'll issue
   READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is
   supported. If that's the case we will use it.

 - If the device supports the block limits VPD and reports a MAXIMUM
   WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16).

 - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond
   0xFFFFFFFF or the block count exceeds 0xFFFF.

 - no_write_same is set for ATA, FireWire and USB.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-13 22:45:42 -08:00
Martin K. Petersen
3c6bdaeab4 [SCSI] Add a report opcode helper
The REPORT SUPPORTED OPERATION CODES command can be used to query
whether a given opcode is supported by a device. Add a helper function
that allows us to look up commands.

We only issue RSOC if the device reports compliance with SPC-3 or
later. But to err on the side of caution we disable the command for ATA,
FireWire and USB.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-13 21:11:31 -08:00
Linus Torvalds
6a5a3d6a4a SCSI misc on 20121012
This is an assorted set of stragglers into the merge window with driver
 updates for megaraid_sas, lpfc, bfi and mvumi. It also includes some fairly
 major fixes for virtio-scsi (scatterlist init), scsi_debug (off by one error),
 storvsc (use after free) and qla2xxx (potential deadlock).
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJQeJfDAAoJEDeqqVYsXL0MhqgH/Rq7ebKJvKcUoKsTJKsZ2H0V
 iaK5wBvhPBXLxYF5fMEnOwOPT34ry4SWJ7IqTKQqZItx1kqZuG4OTUjmueUCxaMb
 7ELFWqyV1z7lyt+XAvNt/RTdMFl3n2SkOxgQJ8kzTPYzEHcE8GCH+dtuqzxoOUqx
 styM6DE9Y5cQR1ozacj/QDMv4gn2jclclYgaxR2OTqzqQFeTMzn5KfRH4b6vYtos
 ZuYlFE4uaAQhsUGeOqTcGlMvot4tyz4KGO4oy4xkHRQXRVQ52Ve8slRr1z4EUJ3H
 rOpz869Y97vnSDFyXuJDa8PpbDd5KOU1uJBxE/3LlCoXIQj4u71hDXETRtq8jtg=
 =T50d
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull misc SCSI updates from James Bottomley:
 "This is an assorted set of stragglers into the merge window with
  driver updates for megaraid_sas, lpfc, bfi and mvumi.  It also
  includes some fairly major fixes for virtio-scsi (scatterlist init),
  scsi_debug (off by one error), storvsc (use after free) and qla2xxx
  (potential deadlock).

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (49 commits)
  [SCSI] storvsc: Account for in-transit packets in the RESET path
  [SCSI] qla2xxx: fix potential deadlock on ha->hardware_lock
  [SCSI] scsi_debug: Fix off-by-one bug when unmapping region
  [SCSI] Shorten the path length of scsi_cmd_to_driver()
  [SCSI] virtio-scsi: support online resizing of disks
  [SCSI] virtio-scsi: fix LUNs greater than 255
  [SCSI] virtio-scsi: initialize scatterlist structure
  [SCSI] megaraid_sas: Version, Changelog, Copyright update
  [SCSI] megaraid_sas: Remove duplicate code
  [SCSI] megaraid_sas: Add SystemPD FastPath support
  [SCSI] megaraid_sas: Add array boundary check for SystemPD
  [SCSI] megaraid_sas: Load io_request DataLength in bytes
  [SCSI] megaraid_sas: Add module param for configurable MSI-X vector count
  [SCSI] megaraid_sas: Remove un-needed completion_lock spinlock calls
  [SCSI] lpfc 8.3.35: Update lpfc version for 8.3.35 driver release
  [SCSI] lpfc 8.3.35: Fixed not reporting logical link speed to SCSI midlayer when QoS not on
  [SCSI] lpfc 8.3.35: Fix error with fabric service parameters causing performance issues
  [SCSI] lpfc 8.3.35: Fixed SCSI host create showing wrong link speed on SLI3 HBA ports
  [SCSI] lpfc 8.3.35: Fixed not checking solicition in progress bit when verifying FCF record for use
  [SCSI] lpfc 8.3.35: Fixed messages for misconfigured port errors
  ...
2012-10-13 10:57:01 +09:00
Li Zhong
329a402cb0 [SCSI] Shorten the path length of scsi_cmd_to_driver()
This patch tries to shorten the path length of scsi_cmd_to_driver(). As only
REQ_TYPE_BLOCK_PC commands can be submitted without a driver, so we could
avoid the related NULL checking, as long as we make sure we don't use it for
REQ_TYPE_BLOCK_PC type commands. Plus, this fixes a bug where you get
different behaviors from REQ_TYPE_BLOCK_PC commands when a driver is and isn't
attached.

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09 12:04:42 +01:00
Yi Zou
3b64b18811 [SCSI] libfc: fix lun reset failure bugs in fc_fcp_resp handling of FCP_RSP_INFO
In LUN RESET testing involving NetApp targets, it is observed that LUN
RESET is failing. The fc_fcp_resp() is not completing the completion
for the LUN RESET task since fc_fcp_resp assumes that the FCP_RSP_INFO
is 8 bytes with the 4 byte reserved field, where in case of NetApp targets
the FCP_RSP to LUN RESET only has 4 bytes of FCP_RSP_INFO. This leads
fc_fcp_resp to error out w/o completing the task completion, eventually
causing LUN RESET to be escalated to host reset, which is not very nice.

Per FCP-3 r04, clause 9.5.15 and Table 23, the FCP_RSP_INFO field can be either
4 bytes or 8 bytes, with the last 4 bytes as "Reserved (if any)". Therefore it
is valid to have 4 bytes FCP_RSP_INFO like some of the NetApp targets behave.
Fixing this by validating the FCP_RSP_INFO against both the two spec allowed
length.

Reported-by: Frank Zhang <frank_1.zhang@intel.com>
Signed-off-by: Yi Zou <yi.zou@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07 11:52:55 +01:00
Neerav Parikh
31c37a6f21 [SCSI] fcoe: Fix write errors on NPIV ports
SCSI errors were generated while writing to LUNs
connected via NPIV ports.

Debugging this it was found that the FCoE packets
transmitted via the NPIV ports were not tagged with
correct user priority as negotiated with peer by DCB
agent. This resulted in FCoE traffic going with priority
zero(0) that did not have priority flow control (PFC)
enabled for it. The initiator after transferring data
to the target never saw any reply indicating the transfer
was complete. This resulted in error recovery (ABTS) and
SCSI command retries by the scsi-mid layer; eventually
resulting in I/O errors.

This patch fixes this issue by keeping the FCoE user
priority information in the fcoe_interface instance
that is common for both the physical port as well as
NPIV ports connected to that physical port; instead
of storing it in fcoe_port structure that has a per
port instance.

Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com>
Acked-by: Yi Zou <yi.zou@intel.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-07 11:49:34 +01:00