DAMON keeps the number of regions under max_nr_regions by skipping regions
split operations when doing so can make the number higher than the limit.
It works well for preventing violation of the limit. But, if somehow the
violation happens, it cannot recovery well depending on the situation. In
detail, if the real number of regions having different access pattern is
higher than the limit, the mechanism cannot reduce the number below the
limit. In such a case, the system could suffer from high monitoring
overhead of DAMON.
The violation can actually happen. For an example, the user could reduce
max_nr_regions while DAMON is running, to be lower than the current number
of regions. Fix the problem by repeating the merge operations with
increasing aggressiveness in kdamond_merge_regions() for the case, until
the limit is met.
[sj@kernel.org: increase regions merge aggressiveness while respecting min_nr_regions]
Link: https://lkml.kernel.org/r/20240626164753.46270-1-sj@kernel.org
[sj@kernel.org: ensure max threshold attempt for max_nr_regions violation]
Link: https://lkml.kernel.org/r/20240627163153.75969-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240624175814.89611-1-sj@kernel.org
Fixes: b9a6ac4e4e ("mm/damon: adaptively adjust regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The problem is that there are systems where cpu_possible_mask has gaps
between set CPUs, for example SPARC. In this scenario addr_to_vb_xa()
hash function can return an index which accesses to not-possible and not
setup CPU area using per_cpu() macro. This results in an oops on SPARC.
A per-cpu vmap_block_queue is also used as hash table, incorrectly
assuming the cpu_possible_mask has no gaps. Fix it by adjusting an index
to a next possible CPU.
Link: https://lkml.kernel.org/r/20240626140330.89836-1-urezki@gmail.com
Fixes: 062eacf57a ("mm: vmalloc: remove a global vmap_blocks xarray")
Reported-by: Nick Bowler <nbowler@draconx.ca>
Closes: https://lore.kernel.org/linux-kernel/ZntjIE6msJbF8zTa@MiWiFi-R3L-srv/T/
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hailong.Liu <hailong.liu@oppo.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Unify all conditions for initial readahead to simplify goto logic in
page_cache_sync_ra(). No functional changes.
Link: https://lkml.kernel.org/r/20240625101909.12234-10-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
try_context_readahead() has a single caller page_cache_sync_ra(). Fold
the function there to make ra state modifications more obvious. No
functional changes.
Link: https://lkml.kernel.org/r/20240625101909.12234-9-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both async and sync readahead are handled by ondemand_readahead()
function. However there isn't actually much in common. Just move async
related parts into page_cache_ra_async() and sync related parts to
page_cache_ra_sync(). No functional changes.
Link: https://lkml.kernel.org/r/20240625101909.12234-8-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ondemand_readahead() scales up the readahead window if the current read
would hit the readahead mark placed by itself. However the condition is
mostly dead code because:
a) In case of async readahead we always increase ra->start so ra->start
== index is never true.
b) In case of sync readahead we either go through
try_context_readahead() in which case ra->async_size == 1 < ra->size or
we go through initial_readahead where ra->async_size == ra->size iff
ra->size == max_pages.
So the only practical effect is reducing async_size for large initial
reads. Make the code more obvious.
Link: https://lkml.kernel.org/r/20240625101909.12234-7-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
page_cache_ra_order() scales folio order down so that is fully fits within
readahead window. Thus the code handling the case where we walked past
the readahead window is a dead code. Remove it.
Link: https://lkml.kernel.org/r/20240625101909.12234-6-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current index to readahead is tracked in readahead_control and properly
updated by page_cache_ra_unbounded() (read_pages() in fact). So there's
no need to track the index separately in force_page_cache_ra().
Link: https://lkml.kernel.org/r/20240625101909.12234-4-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When we succeed in creating some folios in page_cache_ra_order() but then
need to fallback to single page folios, we don't shorten the amount to
read passed to do_page_cache_ra() by the amount we've already read. This
then results in reading more and also in placing another readahead mark in
the middle of the readahead window which confuses readahead code. Fix the
problem by properly reducing number of pages to read.
Link: https://lkml.kernel.org/r/20240625101909.12234-3-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
page_cache_next_miss() should return value outside of the specified range
when no hole is found. However currently it will return the last index
*in* the specified range confusing ondemand_readahead() to think there's a
hole in the searched range and upsetting readahead logic.
Link: https://lkml.kernel.org/r/20240625101909.12234-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: Fix various readahead quirks".
When we were internally testing performance of recent kernels, we have
noticed quite variable performance of readahead arising from various
quirks in readahead code. So I went on a cleaning spree there. This is a
batch of patches resulting out of that. A quick testing in my test VM
with the following fio job file:
[global]
direct=0
ioengine=sync
invalidate=1
blocksize=4k
size=10g
readwrite=read
[reader]
numjobs=1
shows that this patch series improves the throughput from variable one in
310-340 MB/s range to rather stable one at 350 MB/s. As a side effect
these cleanups also address the issue noticed by Bruz Zhang [1].
[1] https://lore.kernel.org/all/20240618114941.5935-1-zhangpengpeng0808@gmail.com/
Zhang Peng reported:
: I test this batch of patch with fio, it indeed has a huge sppedup
: in sequential read when block size is 4KiB. The result as follow,
: for async read, iodepth is set to 128, and other settings
: are self-evident.
:
: casename upstream withFix speedup
: ---------------- -------- -------- -------
: randread-4k-sync 48991 47
: seqread-4k-sync 1162758 14229
: seqread-1024k-sync 1460208 1452522
: randread-4k-libaio 47467 4730
: randread-4k-posixaio 49190 49512
: seqread-4k-libaio 1085932 1234635
: seqread-1024k-libaio 1423341 1402214 -1
: seqread-4k-posixaio 1165084 1369613 1
: seqread-1024k-posixaio 1435422 1408808 -1.8
This patch (of 10):
page_cache_sync_ra() is called when a folio we want to read is not in the
page cache. It is expected that it creates the folio (and perhaps the
following folios as well) and submits reads for them unless some error
happens. However if index == ra->start + ra->size, ondemand_readahead()
will treat the call as another async readahead hit. Thus ra->start will
be advanced and we create pages and queue reads from ra->start + ra->size
further. Consequentially the page at 'index' is not created and
filemap_get_pages() has to always go through filemap_create_folio() path.
This behavior has particularly unfortunate consequences when we have two
IO threads sequentially reading from a shared file (as is the case when
NFS serves sequential reads). In that case what can happen is:
suppose ra->size == ra->async_size == 128, ra->start = 512
T1 T2
reads 128 pages at index 512
- hits async readahead mark
filemap_readahead()
ondemand_readahead()
if (index == expected ...)
ra->start = 512 + 128 = 640
ra->size = 128
ra->async_size = 128
page_cache_ra_order()
blocks in ra_alloc_folio()
reads 128 pages at index 640
- no page found
page_cache_sync_readahead()
ondemand_readahead()
if (index == expected ...)
ra->start = 640 + 128 = 768
ra->size = 128
ra->async_size = 128
page_cache_ra_order()
submits reads from 768
- still no page found at index 640
filemap_create_folio()
- goes on to index 641
page_cache_sync_readahead()
ondemand_readahead()
- founds ra is confused,
trims is to small size
finds pages were already inserted
And as a result read performance suffers.
Fix the problem by triggering async readahead case in ondemand_readahead()
only if we are calling the function because we hit the readahead marker.
In any other case we need to read the folio at 'index' and thus we cannot
really use the current ra state.
Note that the above situation could be viewed as a special case of
file->f_ra state corruption. In fact two thread reading using the shared
file can also seemingly corrupt file->f_ra in interesting ways due to
concurrent access. I never saw that in practice and the fix is going to
be much more complex so for now at least fix this practical problem while
we ponder about the theoretically correct solution.
Link: https://lkml.kernel.org/r/20240625100859.15507-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20240625101909.12234-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/migrate: move NUMA hinting fault folio isolation + checks
under PTL".
Let's just return 0 on success, which is less confusing.
... especially because we got it wrong in the migrate.h stub where we
have "return -EAGAIN; /* can't migrate now */" instead of "return 0;".
Likely this wrong return value doesn't currently matter, but it certainly
adds confusion.
We'll add migrate_misplaced_folio_prepare() next, where we want to use the
same "return 0 on success" approach, so let's just clean this up.
Link: https://lkml.kernel.org/r/20240620212935.656243-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240620212935.656243-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 2b5067a814 ("mm: mmap_lock: add tracepoints around lock
acquisition") introduced TRACE_MMAP_LOCK_EVENT() macro using
preempt_disable() in order to let get_mm_memcg_path() return a percpu
buffer exclusively used by normal, softirq, irq and NMI contexts
respectively.
Commit 832b507253 ("mm: mmap_lock: use local locks instead of disabling
preemption") replaced preempt_disable() with local_lock(&memcg_paths.lock)
based on an argument that preempt_disable() has to be avoided because
get_mm_memcg_path() might sleep if PREEMPT_RT=y.
But syzbot started reporting
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
and
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
messages, for local_lock() does not disable IRQ.
We could replace local_lock() with local_lock_irqsave() in order to
suppress these messages. But this patch instead replaces percpu buffers
with on-stack buffer, for the size of each buffer returned by
get_memcg_path_buf() is only 256 bytes which is tolerable for allocating
from current thread's kernel stack memory.
Link: https://lkml.kernel.org/r/ef22d289-eadb-4ed9-863b-fbc922b33d8d@I-love.SAKURA.ne.jp
Reported-by: syzbot <syzbot+40905bca570ae6784745@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=40905bca570ae6784745
Fixes: 832b507253 ("mm: mmap_lock: use local locks instead of disabling preemption")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
sparse complains that __user pointers are being passed to functions that
expect non-__user ones. In all cases, these functions are in fact working
with user pointers, only the tag is missing. Add it.
Link: https://lkml.kernel.org/r/20240627145754.27333-2-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406272033.KejtfLkw-lkp@intel.com/
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On s390 the virtual address 0 is valid (current CPU's lowcore is mapped
there), therefore KMSAN should not complain about it.
Disable the respective check on s390. There doesn't seem to be a Kconfig
option to describe this situation, so explicitly check for s390.
Link: https://lkml.kernel.org/r/20240621113706.315500-22-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMSAN warns about check_canary() accessing the canary.
The reason is that, even though set_canary() is properly instrumented and
sets shadow, slub explicitly poisons the canary's address range
afterwards.
Unpoisoning the canary is not the right thing to do: only check_canary()
is supposed to ever touch it. Instead, disable KMSAN checks around canary
read accesses.
Link: https://lkml.kernel.org/r/20240621113706.315500-20-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Even though the KMSAN warnings generated by memchr_inv() are suppressed by
metadata_access_enable(), its return value may still be poisoned.
The reason is that the last iteration of memchr_inv() returns `*start !=
value ? start : NULL`, where *start is poisoned. Because of this,
somewhat counterintuitively, the shadow value computed by
visitSelectInst() is equal to `(uintptr_t)start`.
One possibility to fix this, since the intention behind guarding
memchr_inv() behind metadata_access_enable() is to touch poisoned metadata
without triggering KMSAN, is to unpoison its return value. However, this
approach is too fragile. So simply disable the KMSAN checks in the
respective functions.
Link: https://lkml.kernel.org/r/20240621113706.315500-19-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Building the kernel with CONFIG_SLUB_DEBUG and CONFIG_KMSAN causes KMSAN
to complain about touching redzones in kfree().
Fix by extending the existing KASAN-related metadata_access_enable() and
metadata_access_disable() functions to KMSAN.
Link: https://lkml.kernel.org/r/20240621113706.315500-18-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMSAN_WARN_ON() is required for implementing s390-specific KMSAN
functions, but right now it's available only to the KMSAN internal
functions. Expose it to subsystems through <linux/kmsan.h>.
Link: https://lkml.kernel.org/r/20240621113706.315500-17-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
x86's alloc_node_data() rounds up node data size to PAGE_SIZE. It's not
explained why it's needed, but it's most likely for performance reasons,
since the padding bytes are not used anywhere. Some other architectures
do it as well, e.g., mips rounds it up to the cache line size.
kmsan_init_shadow() initializes metadata for each node data and assumes
the x86 rounding, which does not match other architectures. This may
cause the range end to overshoot the end of available memory, in turn
causing virt_to_page_or_null() in kmsan_init_alloc_meta_for_range() to
return NULL, which leads to kernel panic shortly after.
Since the padding bytes are not used, drop the rounding.
Link: https://lkml.kernel.org/r/20240621113706.315500-16-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Improve the readability by replacing the custom aligning logic with
ALIGN_DOWN(). Unlike other places where a similar sequence is used, there
is no size parameter that needs to be adjusted, so the standard macro
fits.
Link: https://lkml.kernel.org/r/20240621113706.315500-15-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Avoid false KMSAN negatives with SLUB_DEBUG by allowing kmsan_slab_free()
to poison the freed memory, and by preventing init_object() from
unpoisoning new allocations by using __memset().
There are two alternatives to this approach. First, init_object() can be
marked with __no_sanitize_memory. This annotation should be used with
great care, because it drops all instrumentation from the function, and
any shadow writes will be lost. Even though this is not a concern with
the current init_object() implementation, this may change in the future.
Second, kmsan_poison_memory() calls may be added after memset() calls.
The downside is that init_object() is called from free_debug_processing(),
in which case poisoning will erase the distinction between simply
uninitialized memory and UAF.
Link: https://lkml.kernel.org/r/20240621113706.315500-14-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Like for KASAN, it's useful to temporarily disable KMSAN checks around,
e.g., redzone accesses. Introduce kmsan_disable_current() and
kmsan_enable_current(), which are similar to their KASAN counterparts.
Make them reentrant in order to handle memory allocations in interrupt
context. Repurpose the allow_reporting field for this.
Link: https://lkml.kernel.org/r/20240621113706.315500-12-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When building the kmsan test as a module, modpost fails with the following
error message:
ERROR: modpost: "panic_on_kmsan" [mm/kmsan/kmsan_test.ko] undefined!
Export panic_on_kmsan in order to improve the KMSAN usability for
modules.
Link: https://lkml.kernel.org/r/20240621113706.315500-11-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Each s390 CPU has lowcore pages associated with it. Each CPU sees its own
lowcore at virtual address 0 through a hardware mechanism called
prefixing. Additionally, all lowcores are mapped to non-0 virtual
addresses stored in the lowcore_ptr[] array.
When lowcore is accessed through virtual address 0, one needs to resolve
metadata for lowcore_ptr[raw_smp_processor_id()].
Expose kmsan_get_metadata() to make it possible to do this from the arch
code.
Link: https://lkml.kernel.org/r/20240621113706.315500-10-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace the x86-specific asm/pgtable_64_types.h #include with the
linux/pgtable.h one, which all architectures have.
While at it, sort the headers alphabetically for the sake of consistency
with other KMSAN code.
Link: https://lkml.kernel.org/r/20240621113706.315500-9-iii@linux.ibm.com
Fixes: f80be4571b ("kmsan: add KMSAN runtime core")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The value assigned to prot is immediately overwritten on the next line
with PAGE_KERNEL. The right hand side of the assignment has no
side-effects.
Link: https://lkml.kernel.org/r/20240621113706.315500-8-iii@linux.ibm.com
Fixes: b073d7f8ae ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Comparing pointers with TASK_SIZE does not make sense when kernel and
userspace overlap. Assume that we are handling user memory access in this
case.
Link: https://lkml.kernel.org/r/20240621113706.315500-7-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reported-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Comparing pointers with TASK_SIZE does not make sense when kernel and
userspace overlap. Skip the comparison when this is the case.
Link: https://lkml.kernel.org/r/20240621113706.315500-6-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMSAN relies on memblock returning all available pages to it (see
kmsan_memblock_free_pages()). It partitions these pages into 3
categories: pages available to the buddy allocator, shadow pages and
origin pages. This partitioning is static.
If new pages appear after kmsan_init_runtime(), it is considered an error.
DEFERRED_STRUCT_PAGE_INIT causes this, so mark it as incompatible with
KMSAN.
Link: https://lkml.kernel.org/r/20240621113706.315500-4-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's useful to have both tests and kmsan.panic=1 during development, but
right now the warnings, that the tests cause, lead to kernel panics.
Temporarily set kmsan.panic=0 for the duration of the KMSAN testing.
Link: https://lkml.kernel.org/r/20240621113706.315500-3-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the callers are converted to use nr_pages naming, use it inside too.
Link: https://lkml.kernel.org/r/20240618091242.2140164-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use nr_pages instead of pages_per_huge_page and move the address alignment
from copy_user_large_folio() into the callers since it is only needed when
we don't know which address will be accessed.
Link: https://lkml.kernel.org/r/20240618091242.2140164-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Directly use folio in struct copy_subpage_arg.
Link: https://lkml.kernel.org/r/20240618091242.2140164-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: improve clear and copy user folio", v2.
Some folio conversions. An improvement is to move address alignment into
the caller as it is only needed if we don't know which address will be
accessed when clearing/copying user folios.
This patch (of 4):
Replace clear_huge_page() with folio_zero_user(), and take a folio
instead of a page. Directly get number of pages by folio_nr_pages()
to remove pages_per_huge_page argument, furthermore, move the address
alignment from folio_zero_user() to the callers since the alignment
is only needed when we don't know which address will be accessed.
Link: https://lkml.kernel.org/r/20240618091242.2140164-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20240618091242.2140164-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For page with order O, we are checking its order (O + 1)'s buddy. If it
is free, we would like to put it to the tail and expect it would be merged
to a page with order (O + 2).
Reword the comment to reflect it.
Link: https://lkml.kernel.org/r/20240619010612.20740-4-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The GFP flags used to choose the zonelist is __GFP_THISNODE.
Let's change it to what exactly it should be.
Link: https://lkml.kernel.org/r/20240619010612.20740-3-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current check on MAX_ZONELISTS is wrapped in CONFIG_DEBUG_MEMORY_INIT,
which may not be triggered all the time.
Let's move it out to a more general place.
Link: https://lkml.kernel.org/r/20240619010612.20740-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Function subsection_map_init() is only used in free_area_init() in the
loop of for_each_mem_pfn_range(). And we are sure in each iteration of
for_each_mem_pfn_range(), start_pfn < end_pfn.
So nr_pages is not possible to be 0 and we can remove the check.
Link: https://lkml.kernel.org/r/20240619010612.20740-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Logs from memory_failure and other memory-failure.c code follow the
format:
"Memory failure: 0x{pfn}: ${lower_case_message}"
Convert the logs in unpoison_memory to follow similar format:
"Unpoison: 0x${pfn}: ${lower_case_message}"
For example (from local test):
[ 1331.938397] Unpoison: 0x144bc8: page was already unpoisoned
No functional change in this commit.
Link: https://lkml.kernel.org/r/20240619063355.171313-1-jiaqiyan@google.com
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently ppc64 and x86 are mentioned as architectures where a 65536 value
is reasonable but arm64 isn't listed and it is also a 64-bit architecture.
The help text says that for "arm" the value should be no higher than 32768
but it's only talking about 32-bit ARM. Adding arm64 to the above list
can make this more clear and avoid confusing users who may think that the
32k limit would also apply to 64-bit ARM.
Link: https://lkml.kernel.org/r/20240619083047.114613-1-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: Brian Masney <bmasney@redhat.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The folio_test_anon(folio)==false cases has been relocated to
folio_add_new_anon_rmap(). Additionally, four other callers consistently
pass anonymous folios.
stack 1:
remove_migration_pmd
-> folio_add_anon_rmap_pmd
-> __folio_add_anon_rmap
stack 2:
__split_huge_pmd_locked
-> folio_add_anon_rmap_ptes
-> __folio_add_anon_rmap
stack 3:
remove_migration_pmd
-> folio_add_anon_rmap_pmd
-> __folio_add_anon_rmap (RMAP_LEVEL_PMD)
stack 4:
try_to_merge_one_page
-> replace_page
-> folio_add_anon_rmap_pte
-> __folio_add_anon_rmap
__folio_add_anon_rmap() only needs to handle the cases
folio_test_anon(folio)==true now.
We can remove the !folio_test_anon(folio)) path within
__folio_add_anon_rmap() now.
Link: https://lkml.kernel.org/r/20240617231137.80726-4-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Tested-by: Shuai Yuan <yuanshuai@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For the !folio_test_anon(folio) case, we can now invoke
folio_add_new_anon_rmap() with the rmap flags set to either EXCLUSIVE or
non-EXCLUSIVE. This action will suppress the VM_WARN_ON_FOLIO check
within __folio_add_anon_rmap() while initiating the process of bringing up
mTHP swapin.
static __always_inline void __folio_add_anon_rmap(struct folio *folio,
struct page *page, int nr_pages, struct vm_area_struct *vma,
unsigned long address, rmap_t flags, enum rmap_level level)
{
...
if (unlikely(!folio_test_anon(folio))) {
VM_WARN_ON_FOLIO(folio_test_large(folio) &&
level != RMAP_LEVEL_PMD, folio);
}
...
}
It also improves the code's readability. Currently, all new anonymous
folios calling folio_add_anon_rmap_ptes() are order-0. This ensures that
new folios cannot be partially exclusive; they are either entirely
exclusive or entirely shared.
A useful comment from Hugh's fix:
: Commit "mm: use folio_add_new_anon_rmap() if folio_test_anon(folio)==
: false" has extended folio_add_new_anon_rmap() to use on non-exclusive
: folios, already visible to others in swap cache and on LRU.
:
: That renders its non-atomic __folio_set_swapbacked() unsafe: it risks
: overwriting concurrent atomic operations on folio->flags, losing bits
: added or restoring bits cleared. Since it's only used in this risky way
: when folio_test_locked and !folio_test_anon, many such races are excluded;
: but, for example, isolations by folio_test_clear_lru() are vulnerable, and
: setting or clearing active.
:
: It could just use the atomic folio_set_swapbacked(); but this function
: does try to avoid atomics where it can, so use a branch instead: just
: avoid setting swapbacked when it is already set, that is good enough.
: (Swapbacked is normally stable once set: lazyfree can undo it, but only
: later, when found anon in a page table.)
:
: This fixes a lot of instability under compaction and swapping loads:
: assorted "Bad page"s, VM_BUG_ON_FOLIO()s, apparently even page double
: frees - though I've not worked out what races could lead to the latter.
[akpm@linux-foundation.org: comment fixes, per David and akpm]
[v-songbaohua@oppo.com: lock the folio to avoid race]
Link: https://lkml.kernel.org/r/20240622032002.53033-1-21cnbao@gmail.com
[hughd@google.com: folio_add_new_anon_rmap() careful __folio_set_swapbacked()]
Link: https://lkml.kernel.org/r/f3599b1d-8323-0dc5-e9e0-fdb3cfc3dd5a@google.com
Link: https://lkml.kernel.org/r/20240617231137.80726-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Tested-by: Shuai Yuan <yuanshuai@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()", v2.
This patchset is preparatory work for mTHP swapin.
folio_add_new_anon_rmap() assumes that new anon rmaps are always
exclusive. However, this assumption doesn’t hold true for cases like
do_swap_page(), where a new anon might be added to the swapcache and is
not necessarily exclusive.
The patchset extends the rmap flags to allow folio_add_new_anon_rmap() to
handle both exclusive and non-exclusive new anon folios. The
do_swap_page() function is updated to use this extended API with rmap
flags. Consequently, all new anon folios now consistently use
folio_add_new_anon_rmap(). The special case for !folio_test_anon() in
__folio_add_anon_rmap() can be safely removed.
In conclusion, new anon folios always use folio_add_new_anon_rmap(),
regardless of exclusivity. Old anon folios continue to use
__folio_add_anon_rmap() via folio_add_anon_rmap_pmd() and
folio_add_anon_rmap_ptes().
This patch (of 3):
In the case of a swap-in, a new anonymous folio is not necessarily
exclusive. This patch updates the rmap flags to allow a new anonymous
folio to be treated as either exclusive or non-exclusive. To maintain the
existing behavior, we always use EXCLUSIVE as the default setting.
[akpm@linux-foundation.org: cleanup and constifications per David and akpm]
[v-songbaohua@oppo.com: fix missing doc for flags of folio_add_new_anon_rmap()]
Link: https://lkml.kernel.org/r/20240619210641.62542-1-21cnbao@gmail.com
[v-songbaohua@oppo.com: enhance doc for extend rmap flags arguments for folio_add_new_anon_rmap]
Link: https://lkml.kernel.org/r/20240622030256.43775-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240617231137.80726-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240617231137.80726-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Tested-by: Shuai Yuan <yuanshuai@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'vmap allocation for size %lu failed: use vmalloc=<size> to increase size'
The above warning is seen in the kernel functionality for allocation of
the restricted virtual memory range till exhaustion.
This message is misleading because 'vmalloc=' is supported on arm32, x86
platforms and is not a valid kernel parameter on a number of other
platforms (in particular its not supported on arm64, alpha, loongarch,
arc, csky, hexagon, microblaze, mips, nios2, openrisc, parisc, m64k,
powerpc, riscv, sh, um, xtensa, s390, sparc). With the update, the output
gets modified to include the function parameters along with the start and
end of the virtual memory range allowed.
The warning message after fix on kernel version 6.10.0-rc1+:
vmalloc_node_range for size 33619968 failed: Address range restricted between 0xffff800082640000 - 0xffff800084650000
Backtrace with the misleading error message:
vmap allocation for size 33619968 failed: use vmalloc=<size> to increase size
insmod: vmalloc error: size 33554432, vm_struct allocation failed, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 46 PID: 1977 Comm: insmod Tainted: G E 6.10.0-rc1+ #79
Hardware name: INGRASYS Yushan Server iSystem TEMP-S000141176+10/Yushan Motherboard, BIOS 2.10.20230517 (SCP: xxx) yyyy/mm/dd
Call trace:
dump_backtrace+0xa0/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x78/0x90
dump_stack+0x18/0x28
warn_alloc+0x12c/0x1b8
__vmalloc_node_range_noprof+0x28c/0x7e0
custom_init+0xb4/0xfff8 [test_driver]
do_one_initcall+0x60/0x290
do_init_module+0x68/0x250
load_module+0x236c/0x2428
init_module_from_file+0x8c/0xd8
__arm64_sys_finit_module+0x1b4/0x388
invoke_syscall+0x78/0x108
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x130
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x190/0x198
[Shubhang@os.amperecomputing.com: v5]
Link: https://lkml.kernel.org/r/CH2PR01MB5894B0182EA0B28DF2EFB916F5C72@CH2PR01MB5894.prod.exchangelabs.com
Link: https://lkml.kernel.org/r/MN2PR01MB59025CC02D1D29516527A693F5C62@MN2PR01MB5902.prod.exchangelabs.com
Signed-off-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Reviewed-by: Christoph Lameter (Ampere) <cl@linux.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Xiongwei Song <xiongwei.song@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We currently have a hack for virtio-mem in place to handle memory
offlining with PageOffline pages for which we already adjusted the managed
page count.
Let's enlighten memory offlining code so we can get rid of that hack, and
document the situation.
Link: https://lkml.kernel.org/r/20240607090939.89524-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Marco Elver <elver@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We currently initialize the memmap such that PG_reserved is set and the
refcount of the page is 1. In virtio-mem code, we have to manually clear
that PG_reserved flag to make memory offlining with partially hotplugged
memory blocks possible: has_unmovable_pages() would otherwise bail out on
such pages.
We want to avoid PG_reserved where possible and move to typed pages
instead. Further, we want to further enlighten memory offlining code
about PG_offline: offline pages in an online memory section. One example
is handling managed page count adjustments in a cleaner way during memory
offlining.
So let's initialize the pages with PG_offline instead of PG_reserved.
generic_online_page()->__free_pages_core() will now clear that flag before
handing that memory to the buddy.
Note that the page refcount is still 1 and would forbid offlining of such
memory except when special care is take during GOING_OFFLINE as currently
only implemented by virtio-mem.
With this change, we can now get non-PageReserved() pages in the XEN
balloon list. From what I can tell, that can already happen via
decrease_reservation(), so that should be fine.
HV-balloon should not really observe a change: partial online memory
blocks still cannot get surprise-offlined, because the refcount of these
PageOffline() pages is 1.
Update virtio-mem, HV-balloon and XEN-balloon code to be aware that
hotplugged pages are now PageOffline() instead of PageReserved() before
they are handed over to the buddy.
We'll leave the ZONE_DEVICE case alone for now.
Note that self-hosted vmemmap pages will no longer be marked as
reserved. This matches ordinary vmemmap pages allocated from the buddy
during memory hotplug. Now, really only vmemmap pages allocated from
memblock during early boot will be marked reserved. Existing
PageReserved() checks seem to be handling all relevant cases correctly
even after this change.
Link: https://lkml.kernel.org/r/20240607090939.89524-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de> [generic memory-hotplug bits]
Cc: Alexander Potapenko <glider@google.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Marco Elver <elver@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/memory_hotplug: use PageOffline() instead of
PageReserved() for !ZONE_DEVICE".
This can be a considered a long-overdue follow-up to some parts of [1].
The patches are based on [2], but they are not strictly required -- just
makes it clearer why we can use adjust_managed_page_count() for memory
hotplug without going into details about highmem.
We stop initializing pages with PageReserved() in memory hotplug code --
except when dealing with ZONE_DEVICE for now. Instead, we use
PageOffline(): all pages are initialized to PageOffline() when onlining a
memory section, and only the ones actually getting exposed to the
system/page allocator will get PageOffline cleared.
This way, we enlighten memory hotplug more about PageOffline() pages and
can cleanup some hacks we have in virtio-mem code.
What about ZONE_DEVICE? PageOffline() is wrong, but we might just stop
using PageReserved() for them later by simply checking for
is_zone_device_page() at suitable places. That will be a separate patch
set / proposal.
This primarily affects virtio-mem, HV-balloon and XEN balloon. I only
briefly tested with virtio-mem, which benefits most from these cleanups.
[1] https://lore.kernel.org/all/20191024120938.11237-1-david@redhat.com/
[2] https://lkml.kernel.org/r/20240607083711.62833-1-david@redhat.com
This patch (of 3):
In preparation for further changes, let's teach __free_pages_core() about
the differences of memory hotplug handling.
Move the memory hotplug specific handling from generic_online_page() to
__free_pages_core(), use adjust_managed_page_count() on the memory hotplug
path, and spell out why memory freed via memblock cannot currently use
adjust_managed_page_count().
[david@redhat.com: add missed CONFIG_DEFERRED_STRUCT_PAGE_INIT]
Link: https://lkml.kernel.org/r/b72e6efd-fb0a-459c-b1a0-88a98e5b19e2@redhat.com
[david@redhat.com: fix up the memblock comment, per Oscar]
Link: https://lkml.kernel.org/r/2ed64218-7f3b-4302-a5dc-27f060654fe2@redhat.com
[david@redhat.com: add the parameter name also in the declaration]
Link: https://lkml.kernel.org/r/ca575956-f0dd-4fb9-a307-6b7621681ed9@redhat.com
Link: https://lkml.kernel.org/r/20240607090939.89524-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240607090939.89524-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Marco Elver <elver@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are no more users of page_mkclean(), remove it and update the
document and comment.
Link: https://lkml.kernel.org/r/20240604114822.2089819-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's simply reinitialize the page->_mapcount directly. We can now get
rid of page_mapcount_reset().
Link: https://lkml.kernel.org/r/20240529111904.2069608-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> [zram/zsmalloc workloads]
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's clean it up: use a proper page type and store our data (offset into
a page) in the lower 16 bit as documented.
We won't be able to support 256 KiB base pages, which is acceptable.
Teach Kconfig to handle that cleanly using a new CONFIG_HAVE_ZSMALLOC.
Based on this, we should do a proper "struct zsdesc" conversion, as
proposed in [1].
This removes the last _mapcount/page_type offender.
[1] https://lore.kernel.org/all/20231130101242.2590384-1-42.hyeyoo@gmail.com/
Link: https://lkml.kernel.org/r/20240529111904.2069608-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> [zram/zsmalloc workloads]
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix used-uninitialized of `page'.
Fixes: dce7d10be4 ("mm/madvise: optimize lazyfreeing with mTHP in madvise_free")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406260514.SLhNM9kQ-lkp@intel.com
Cc: Lance Yang <ioworker0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The dirty throttling logic is interspersed with assumptions that dirty
limits in PAGE_SIZE units fit into 32-bit (so that various multiplications
fit into 64-bits). If limits end up being larger, we will hit overflows,
possible divisions by 0 etc. Fix these problems by never allowing so
large dirty limits as they have dubious practical value anyway. For
dirty_bytes / dirty_background_bytes interfaces we can just refuse to set
so large limits. For dirty_ratio / dirty_background_ratio it isn't so
simple as the dirty limit is computed from the amount of available memory
which can change due to memory hotplug etc. So when converting dirty
limits from ratios to numbers of pages, we just don't allow the result to
exceed UINT_MAX.
This is root-only triggerable problem which occurs when the operator
sets dirty limits to >16 TB.
Link: https://lkml.kernel.org/r/20240621144246.11148-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-By: Zach O'Keefe <zokeefe@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: Avoid possible overflows in dirty throttling".
Dirty throttling logic assumes dirty limits in page units fit into
32-bits. This patch series makes sure this is true (see patch 2/2 for
more details).
This patch (of 2):
This reverts commit 9319b64790.
The commit is broken in several ways. Firstly, the removed (u64) cast
from the multiplication will introduce a multiplication overflow on 32-bit
archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the
default settings with 4GB of RAM will trigger this). Secondly, the
div64_u64() is unnecessarily expensive on 32-bit archs. We have
div64_ul() in case we want to be safe & cheap. Thirdly, if dirty
thresholds are larger than 1<<32 pages, then dirty balancing is going to
blow up in many other spectacular ways anyway so trying to fix one
possible overflow is just moot.
Link: https://lkml.kernel.org/r/20240621144017.30993-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20240621144246.11148-1-jack@suse.cz
Fixes: 9319b64790 ("mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-By: Zach O'Keefe <zokeefe@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Link: https://lkml.kernel.org/r/20240618014517.25954-1-lihongfu@kylinos.cn
Signed-off-by: Hongfu Li <lihongfu@kylinos.cn>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 21fbd59136 ("ksm: add the ksm prefix to the names of the
ksm private structures"), we could directly use KMEM_CACHE().
Link: https://lkml.kernel.org/r/20240618081201.134985-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT contains code for handling of online DAMON parameters
update edge cases. It is no more necessary since damon_commit_ctx() takes
care of the cases. Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT manually manipulates the DAMON context struct for online
parameters update. Since the struct contains not only input parameters
but also internal status and operation results, it is not that simple.
Indeed, we found and fixed a few bugs in the code. Now DAMON core layer
provides a function for the usage, namely damon_commit_ctx(). Replace the
manual manipulation logic with the function. The core layer function
could have its own bugs, but this change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM contains code for handling of online DAMON parameters update
edge cases. It is no more necessary since damon_commit_ctx() takes care
of the cases. Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_RECLAIM manually manipulates the DAMON context struct for online
parameters update. Since the struct contains not only input parameters
but also internal status and operation results, it is not that simple.
Indeed, we found and fixed a few bugs in the code. Now DAMON core layer
provides a function for the usage, namely damon_commit_ctx(). Replace the
manual manipulation logic with the function. The core layer function
could have its own bugs, but this change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The functions were for updating DAMON structs that may or may not be
partially populated. Hence it was not for only adding items, but also
removing unnecessary items and updating items in-place. A previous commit
has changed the functions to assume the structs are not partially
populated, and do only adding items. Make the names better explain the
behavior.
Link: https://lkml.kernel.org/r/20240618181809.82078-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon/sysfs-schemes.c contains code for handling of online DAMON
parameters update edge cases. The logics are no more necessary since
damon_commit_ctx() and damon_commit_quota_goals() takes care of the cases.
Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function was for updating DAMON structs that may or may not be
partially populated. Hence it was not for only adding items, but also
removing unnecessary items and updating items in-place. A previous commit
has changed the function to assume the structs are not partially
populated, and do only adding items. Make the function name better
explain the behavior.
Link: https://lkml.kernel.org/r/20240618181809.82078-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon/sysfs.c contains code for handling of online DAMON parameters update
edge cases. It is no more necessary since damon_commit_ctx() takes care
of the cases. Remove the unnecessary code.
Link: https://lkml.kernel.org/r/20240618181809.82078-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS manually manipulates the DAMOS quota structs for online quotal
goals parameter update. Since the struct contains not only input
parameters but also internal status and operation results, it is not that
simple. Now DAMON core layer provides a function for the usage, namely
damon_commit_quota_goals(). Replace the manual manipulation logic with
the function. The core layer function could have its own bugs, but this
change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS manually manipulates DAMON context structs for online
parameters update. Since the struct contains not only input parameters
but also internal status and operation results, it is not that simple.
Indeed, we found and fixed a few bugs in the code. Now DAMON core layer
provides a function for the usage, namely damon_commit_ctx(). Replace the
manual manipulation logic with the function. The core layer function
could have its own bugs, but this change removes a source of bugs.
Link: https://lkml.kernel.org/r/20240618181809.82078-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement functions for supporting online DAMON context level parameters
update. The function receives two DAMON context structs. One is the
struct that currently being used by a kdamond and therefore to be updated.
The other one contains the parameters to be applied to the first one.
The function applies the new parameters to the destination struct while
keeping/updating the internal status and operation results. The function
should be called from DAMON context-update-safe place, like DAMON
callbacks.
Link: https://lkml.kernel.org/r/20240618181809.82078-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: introduce DAMON parameters online commit function".
DAMON context struct (damon_ctx) contains user requests (parameters),
internal status, and operation results. For flexible usages, DAMON API
users are encouraged to manually manipulate the struct. That works well
for simple use cases. However, it has turned out that it is not that
simple at least for online parameters udpate. It is easy to forget
properly maintaining internal status and operation results. Also, such
manual manipulation for online tuning is implemented multiple times on
DAMON API users including DAMON sysfs interface, DAMON_RECLAIM and
DAMON_LRU_SORT. As a result, we have multiple sources of bugs for same
problem. Actually we found and fixed a few bugs from online parameter
updating of DAMON API users.
Implement a function for online DAMON parameters update in core layer, and
replace DAMON API users' manual manipulation code for the use case. The
core layer function could still have bugs, but this change reduces the
source of bugs for the problem to one place.
This patch (of 12):
Implement functions for supporting online DAMOS quota goals parameters
update. The function receives two DAMOS quota structs. One is the struct
that currently being used by a kdamond and therefore to be updated. The
other one contains the parameters to be applied to the first one. The
function applies the new parameters to the destination struct while
keeping/updating the internal status. The function should be called from
parameters-update safe place, like DAMON callbacks.
Link: https://lkml.kernel.org/r/20240618181809.82078-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240618181809.82078-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mem_cgroup_migrate() will clear the memcg data of the old folio,
therefore, the callers must make sure the old folio is no longer on the
LRU list, otherwise the old folio can not get the correct lruvec object
without the memcg data, which could lead to potential problems [1].
Thus adding a VM_BUG_ON_FOLIO() to catch this issue.
[1] https://lore.kernel.org/all/5ab860d8ee987955e917748f9d6da525d3b52690.1718326003.git.baolin.wang@linux.alibaba.com/
Link: https://lkml.kernel.org/r/66d181c41b7ced35dbd39ffd3f5774a11aef266a.1718327124.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch introduces DAMOS_MIGRATE_HOT action, which is similar to
DAMOS_MIGRATE_COLD, but proritizes hot pages.
It migrates pages inside the given region to the 'target_nid' NUMA node
in the sysfs.
Here is one of the example usage of this 'migrate_hot' action.
$ cd /sys/kernel/mm/damon/admin/kdamonds/<N>
$ cat contexts/<N>/schemes/<N>/action
migrate_hot
$ echo 0 > contexts/<N>/schemes/<N>/target_nid
$ echo commit > state
$ numactl -p 2 ./hot_cold 500M 600M &
$ numastat -c -p hot_cold
Per-node process memory usage (in MBs)
PID Node 0 Node 1 Node 2 Total
-------------- ------ ------ ------ -----
701 (hot_cold) 501 0 601 1101
Link: https://lkml.kernel.org/r/20240614030010.751-7-honggyu.kim@sk.com
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch introduces DAMOS_MIGRATE_COLD action, which is similar to
DAMOS_PAGEOUT, but migrate folios to the given 'target_nid' in the sysfs
instead of swapping them out.
The 'target_nid' sysfs knob informs the migration target node ID.
Here is one of the example usage of this 'migrate_cold' action.
$ cd /sys/kernel/mm/damon/admin/kdamonds/<N>
$ cat contexts/<N>/schemes/<N>/action
migrate_cold
$ echo 2 > contexts/<N>/schemes/<N>/target_nid
$ echo commit > state
$ numactl -p 0 ./hot_cold 500M 600M &
$ numastat -c -p hot_cold
Per-node process memory usage (in MBs)
PID Node 0 Node 1 Node 2 Total
-------------- ------ ------ ------ -----
701 (hot_cold) 501 0 601 1101
Since there are some common routines with pageout, many functions have
similar logics between pageout and migrate cold.
damon_pa_migrate_folio_list() is a minimized version of
shrink_folio_list().
Link: https://lkml.kernel.org/r/20240614030010.751-6-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch adds target_nid under
/sys/kernel/mm/damon/admin/kdamonds/<N>/contexts/<N>/schemes/<N>/
The 'target_nid' can be used as the destination node for DAMOS actions
such as DAMOS_MIGRATE_{HOT,COLD} in the follow up patches.
[sj@kernel.org: document target_nid file]
Link: https://lkml.kernel.org/r/20240618213630.84846-3-sj@kernel.org
Link: https://lkml.kernel.org/r/20240614030010.751-4-honggyu.kim@sk.com
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The alloc_demote_folio can also be used for general migration including
both demotion and promotion so it'd be better to rename it from
alloc_demote_folio to alloc_migrate_folio.
Link: https://lkml.kernel.org/r/20240614030010.751-3-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "DAMON based tiered memory management for CXL memory", v6.
Introduction
============
With the advent of CXL/PCIe attached DRAM, which will be called simply as
CXL memory in this cover letter, some systems are becoming more
heterogeneous having memory systems with different latency and bandwidth
characteristics. They are usually handled as different NUMA nodes in
separate memory tiers and CXL memory is used as slow tiers because of its
protocol overhead compared to local DRAM.
In this kind of systems, we need to be careful placing memory pages on
proper NUMA nodes based on the memory access frequency. Otherwise, some
frequently accessed pages might reside on slow tiers and it makes
performance degradation unexpectedly. Moreover, the memory access
patterns can be changed at runtime.
To handle this problem, we need a way to monitor the memory access
patterns and migrate pages based on their access temperature. The
DAMON(Data Access MONitor) framework and its DAMOS(DAMON-based Operation
Schemes) can be useful features for monitoring and migrating pages. DAMOS
provides multiple actions based on DAMON monitoring results and it can be
used for proactive reclaim, which means swapping cold pages out with
DAMOS_PAGEOUT action, but it doesn't support migration actions such as
demotion and promotion between tiered memory nodes.
This series supports two new DAMOS actions; DAMOS_MIGRATE_HOT for
promotion from slow tiers and DAMOS_MIGRATE_COLD for demotion from fast
tiers. This prevents hot pages from being stuck on slow tiers, which
makes performance degradation and cold pages can be proactively demoted to
slow tiers so that the system can increase the chance to allocate more hot
pages to fast tiers.
The DAMON provides various tuning knobs but we found that the proactive
demotion for cold pages is especially useful when the system is running
out of memory on its fast tier nodes.
Our evaluation result shows that it reduces the performance slowdown
compared to the default memory policy from 11% to 3~5% when the system
runs under high memory pressure on its fast tier DRAM nodes.
DAMON configuration
===================
The specific DAMON configuration doesn't have to be in the scope of this
patch series, but some rough idea is better to be shared to explain the
evaluation result.
The DAMON provides many knobs for fine tuning but its configuration file
is generated by HMSDK[3]. It includes gen_config.py script that generates
a json file with the full config of DAMON knobs and it creates multiple
kdamonds for each NUMA node when the DAMON is enabled so that it can run
hot/cold based migration for tiered memory.
Evaluation Workload
===================
The performance evaluation is done with redis[4], which is a widely used
in-memory database and the memory access patterns are generated via
YCSB[5]. We have measured two different workloads with zipfian and latest
distributions but their configs are slightly modified to make memory usage
higher and execution time longer for better evaluation.
The idea of evaluation using these migrate_{hot,cold} actions covers
system-wide memory management rather than partitioning hot/cold pages of a
single workload. The default memory allocation policy creates pages to
the fast tier DRAM node first, then allocates newly created pages to the
slow tier CXL node when the DRAM node has insufficient free space. Once
the page allocation is done then those pages never move between NUMA
nodes. It's not true when using numa balancing, but it is not the scope
of this DAMON based tiered memory management support.
If the working set of redis can be fit fully into the DRAM node, then the
redis will access the fast DRAM only. Since the performance of DRAM only
is faster than partially accessing CXL memory in slow tiers, this
environment is not useful to evaluate this patch series.
To make pages of redis be distributed across fast DRAM node and slow CXL
node to evaluate our migrate_{hot,cold} actions, we pre-allocate some cold
memory externally using mmap and memset before launching redis-server. We
assumed that there are enough amount of cold memory in datacenters as
TMO[6] and TPP[7] papers mentioned.
The evaluation sequence is as follows.
1. Turn on DAMON with DAMOS_MIGRATE_COLD action for DRAM node and
DAMOS_MIGRATE_HOT action for CXL node. It demotes cold pages on DRAM
node and promotes hot pages on CXL node in a regular interval.
2. Allocate a huge block of cold memory by calling mmap and memset at
the fast tier DRAM node, then make the process sleep to make the fast
tier has insufficient space for redis-server.
3. Launch redis-server and load prebaked snapshot image, dump.rdb. The
redis-server consumes 52GB of anon pages and 33GB of file pages, but
due to the cold memory allocated at 2, it fails allocating the entire
memory of redis-server on the fast tier DRAM node so it partially
allocates the remaining on the slow tier CXL node. The ratio of
DRAM:CXL depends on the size of the pre-allocated cold memory.
4. Run YCSB to make zipfian or latest distribution of memory accesses to
redis-server, then measure its execution time when it's completed.
5. Repeat 4 over 50 times to measure the average execution time for each
run.
6. Increase the cold memory size then repeat goes to 2.
For each test at 4 took about a minute so repeating it 50 times almost
took about 1 hour for each test with a specific cold memory from 440GB to
500GB in 10GB increments for each evaluation. So it took about more than
10 hours for both zipfian and latest workloads to get the entire
evaluation results. Repeating the same test set multiple times doesn't
show much difference so I think it might be enough to make the result
reliable.
Evaluation Results
==================
All the result values are normalized to DRAM-only execution time because
the workload cannot be faster than DRAM-only unless the workload hits the
peak bandwidth but our redis test doesn't go beyond the bandwidth limit.
So the DRAM-only execution time is the ideal result without affected by
the gap between DRAM and CXL performance difference. The NUMA node
environment is as follows.
node0 - local DRAM, 512GB with a CPU socket (fast tier)
node1 - disabled
node2 - CXL DRAM, 96GB, no CPU attached (slow tier)
The following is the result of generating zipfian distribution to
redis-server and the numbers are averaged by 50 times of execution.
1. YCSB zipfian distribution read only workload
memory pressure with cold memory on node0 with 512GB of local DRAM.
====================+================================================+=========
| cold memory occupied by mmap and memset |
| 0G 440G 450G 460G 470G 480G 490G 500G |
====================+================================================+=========
Execution time normalized to DRAM-only values | GEOMEAN
--------------------+------------------------------------------------+---------
DRAM-only | 1.00 - - - - - - - | 1.00
CXL-only | 1.19 - - - - - - - | 1.19
default | - 1.00 1.05 1.08 1.12 1.14 1.18 1.18 | 1.11
DAMON tiered | - 1.03 1.03 1.03 1.03 1.03 1.07 *1.05 | 1.04
DAMON lazy | - 1.04 1.03 1.04 1.05 1.06 1.06 *1.06 | 1.05
====================+================================================+=========
CXL usage of redis-server in GB | AVERAGE
--------------------+------------------------------------------------+---------
DRAM-only | 0.0 - - - - - - - | 0.0
CXL-only | 51.4 - - - - - - - | 51.4
default | - 0.6 10.6 20.5 30.5 40.5 47.6 50.4 | 28.7
DAMON tiered | - 0.6 0.5 0.4 0.7 0.8 7.1 5.6 | 2.2
DAMON lazy | - 0.5 3.0 4.5 5.4 6.4 9.4 9.1 | 5.5
====================+================================================+=========
Each test result is based on the execution environment as follows.
DRAM-only: redis-server uses only local DRAM memory.
CXL-only: redis-server uses only CXL memory.
default: default memory policy(MPOL_DEFAULT).
numa balancing disabled.
DAMON tiered: DAMON enabled with DAMOS_MIGRATE_COLD for DRAM
nodes and DAMOS_MIGRATE_HOT for CXL nodes.
DAMON lazy: same as DAMON tiered, but turn on DAMON just
before making memory access request via YCSB.
The above result shows the "default" execution time goes up as the size of
cold memory is increased from 440G to 500G because the more cold memory
used, the more CXL memory is used for the target redis workload and this
makes the execution time increase.
However, "DAMON tiered" and other DAMON results show less slowdown because
the DAMOS_MIGRATE_COLD action at DRAM node proactively demotes
pre-allocated cold memory to CXL node and this free space at DRAM
increases more chance to allocate hot or warm pages of redis-server to
fast DRAM node. Moreover, DAMOS_MIGRATE_HOT action at CXL node also
promotes hot pages of redis-server to DRAM node actively.
As a result, it makes more memory of redis-server stay in DRAM node
compared to "default" memory policy and this makes the performance
improvement.
Please note that the result numbers of "DAMON tiered" and "DAMON lazy" at
500G are marked with * stars, which means their test results are replaced
with reproduced tests that didn't have OOM issue.
That was needed because sometimes the test processes get OOM when DRAM has
insufficient space. The DAMOS_MIGRATE_HOT doesn't kick reclaim but just
gives up migration when there is not enough space at DRAM side. The
problem happens when there is competition between normal allocation and
migration and the migration is done before normal allocation, then the
completely unrelated normal allocation can trigger reclaim, which incurs
OOM.
Because of this issue, I have also tested more cases with
"demotion_enabled" flag enabled to make such reclaim doesn't trigger OOM,
but just demote reclaimed pages. The following test results show more
tests with "kswapd" marked.
2. YCSB zipfian distribution read only workload (with demotion_enabled true)
memory pressure with cold memory on node0 with 512GB of local DRAM.
====================+================================================+=========
| cold memory occupied by mmap and memset |
| 0G 440G 450G 460G 470G 480G 490G 500G |
====================+================================================+=========
Execution time normalized to DRAM-only values | GEOMEAN
--------------------+------------------------------------------------+---------
DAMON tiered | - 1.03 1.03 1.03 1.03 1.03 1.07 1.05 | 1.04
DAMON lazy | - 1.04 1.03 1.04 1.05 1.06 1.06 1.06 | 1.05
DAMON tiered kswapd | - 1.03 1.03 1.03 1.03 1.02 1.02 1.03 | 1.03
DAMON lazy kswapd | - 1.04 1.04 1.04 1.03 1.05 1.04 1.05 | 1.04
====================+================================================+=========
CXL usage of redis-server in GB | AVERAGE
--------------------+------------------------------------------------+---------
DAMON tiered | - 0.6 0.5 0.4 0.7 0.8 7.1 5.6 | 2.2
DAMON lazy | - 0.5 3.0 4.5 5.4 6.4 9.4 9.1 | 5.5
DAMON tiered kswapd | - 0.0 0.0 0.4 0.5 0.1 0.8 1.0 | 0.4
DAMON lazy kswapd | - 4.2 4.6 5.3 1.7 6.8 8.1 5.8 | 5.2
====================+================================================+=========
Each test result is based on the exeuction environment as follows.
DAMON tiered: same as before
DAMON lazy: same as before
DAMON tiered kswapd: same as DAMON tiered, but turn on
/sys/kernel/mm/numa/demotion_enabled to make
kswapd or direct reclaim does demotion.
DAMON lazy kswapd: same as DAMON lazy, but turn on
/sys/kernel/mm/numa/demotion_enabled to make
kswapd or direct reclaim does demotion.
The "DAMON tiered kswapd" and "DAMON lazy kswapd" didn't trigger OOM at
all unlike other tests because kswapd and direct reclaim from DRAM node
can demote reclaimed pages to CXL node independently from DAMON actions
and their results are slightly better than without having
"demotion_enabled".
In summary, the evaluation results show that DAMON memory management with
DAMOS_MIGRATE_{HOT,COLD} actions reduces the performance slowdown compared
to the "default" memory policy from 11% to 3~5% when the system runs with
high memory pressure on its fast tier DRAM nodes.
Having these DAMOS_MIGRATE_HOT and DAMOS_MIGRATE_COLD actions can make
tiered memory systems run more efficiently under high memory pressures.
This patch (of 7):
The alloc_demote_folio can be used out of vmscan.c so it'd be better to
remove static keyword from it.
Link: https://lkml.kernel.org/r/20240614030010.751-1-honggyu.kim@sk.com
Link: https://lkml.kernel.org/r/20240614030010.751-2-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Function deferred_[init|free]_pages are only used in
deferred_init_maxorder(), which makes sure the range to init/free is
within MAX_ORDER_NR_PAGES size.
With this knowledge, we can simplify these two functions. Since
* only the first pfn could be IS_MAX_ORDER_ALIGNED()
Also since the range passed to deferred_[init|free]_pages is always from
memblock.memory for those we have already allocated memmap to cover,
pfn_valid() always return true. Then we can remove related check.
[richard.weiyang@gmail.com: adjust function declaration indention per David]
Link: https://lkml.kernel.org/r/20240613114525.27528-1-richard.weiyang@gmail.com
Link: https://lkml.kernel.org/r/20240612020421.31975-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dirty swap cache page could live both in page table (not page cache) and
swap cache when freshly swapped in. Correct comment.
Link: https://lkml.kernel.org/r/20240612071835.157004-14-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When user sets SIGBUS to SIG_IGN, it won't cause loop now. For action
required mce error, SIGBUS cannot be blocked. Also when a hwpoisoned page
is re-accessed, kill_accessing_process() will be called to kill the
process.
Link: https://lkml.kernel.org/r/20240612071835.157004-13-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When return value is 0, it could also means the page is free hugetlb page
or free buddy page. Fix the corresponding comment.
Link: https://lkml.kernel.org/r/20240612071835.157004-12-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are some functions only used inside mm. Move them into internal.h.
No functional change intended.
Link: https://lkml.kernel.org/r/20240612071835.157004-11-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405251049.hxjwX7zO-lkp@intel.com/
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use helper macro task_pid_nr() to get the pid of a task. No functional
change intended.
Link: https://lkml.kernel.org/r/20240612071835.157004-9-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When CONFIG_HWPOISON_INJECT is not enabled, there is no user of the
hwpoison_filter() outside memory-failure. So there is no need to export
it in that case.
Link: https://lkml.kernel.org/r/20240612071835.157004-8-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406070136.hGQwVbsv-lkp@intel.com/
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's meaningless and confusing to init local variable count to 1. Remove
it. No functional change intended.
Link: https://lkml.kernel.org/r/20240612071835.157004-7-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use local variable folio directly to save a page_folio() call. Also use
folio_mapped() to save more page_folio() calls. No functional change
intended.
Link: https://lkml.kernel.org/r/20240612071835.157004-5-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: kernel test robot <lkp@intel.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Some cleanups for memory-failure", v3.
This series contains a few cleanup patches to avoid exporting unused
function, add helper macro, fix some obsolete comments and so on. More
details can be found in the respective changelogs.
This patch (of 13):
Remove unneeded page != NULL check. pfn_to_page() won't return NULL. No
functional change intended.
Link: https://lkml.kernel.org/r/20240612071835.157004-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20240612071835.157004-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The previous patch has already reconstructed the cftype attributes based
on the templates and saved them in dfl_cftypes and legacy_cftypes. then
remove the old procedure and switch to the new cftypes.
Link: https://lkml.kernel.org/r/20240612092409.2027592-4-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Unlike other cgroup subsystems, the hugetlb cgroup does not provide a
static array of cftype that explicitly displays the properties, handling
functions, etc., of each file. Instead, it dynamically creates the
attribute of cftypes based on the hstate during the startup procedure.
This reduces the readability of the code.
To fix this issue, introduce two templates of cftypes, and rebuild the
attributes according to the hstate to make it ready to be added to cgroup
framework.
Link: https://lkml.kernel.org/r/20240612092409.2027592-3-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: kernel test robot <oliver.sang@intel.com>
From: Xiu Jianfeng <xiujianfeng@huawei.com>
Subject: mm/hugetlb_cgroup: register lockdep key for cftype
Date: Tue, 18 Jun 2024 07:19:22 +0000
When CONFIG_DEBUG_LOCK_ALLOC is enabled, the following commands can
trigger a bug,
mount -t cgroup2 none /sys/fs/cgroup
cd /sys/fs/cgroup
echo "+hugetlb" > cgroup.subtree_control
The log is as below:
BUG: key ffff8880046d88d8 has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 3 PID: 226 at kernel/locking/lockdep.c:4945 lockdep_init_map_type+0x185/0x220
Modules linked in:
CPU: 3 PID: 226 Comm: bash Not tainted 6.10.0-rc4-next-20240617-g76db4c64526c #544
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:lockdep_init_map_type+0x185/0x220
Code: 00 85 c0 0f 84 6c ff ff ff 8b 3d 6a d1 85 01 85 ff 0f 85 5e ff ff ff 48 c7 c6 21 99 4a 82 48 c7 c7 60 29 49 82 e8 3b 2e f5
RSP: 0018:ffffc9000083fc30 EFLAGS: 00000282
RAX: 0000000000000000 RBX: ffffffff828dd820 RCX: 0000000000000027
RDX: ffff88803cd9cac8 RSI: 0000000000000001 RDI: ffff88803cd9cac0
RBP: ffff88800674fbb0 R08: ffffffff828ce248 R09: 00000000ffffefff
R10: ffffffff8285e260 R11: ffffffff828b8eb8 R12: ffff8880046d88d8
R13: 0000000000000000 R14: 0000000000000000 R15: ffff8880067281c0
FS: 00007f68601ea740(0000) GS:ffff88803cd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005614f3ebc740 CR3: 000000000773a000 CR4: 00000000000006f0
Call Trace:
<TASK>
? __warn+0x77/0xd0
? lockdep_init_map_type+0x185/0x220
? report_bug+0x189/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? lockdep_init_map_type+0x185/0x220
__kernfs_create_file+0x79/0x100
cgroup_addrm_files+0x163/0x380
? find_held_lock+0x2b/0x80
? find_held_lock+0x2b/0x80
? find_held_lock+0x2b/0x80
css_populate_dir+0x73/0x180
cgroup_apply_control_enable+0x12f/0x3a0
cgroup_subtree_control_write+0x30b/0x440
kernfs_fop_write_iter+0x13a/0x1f0
vfs_write+0x341/0x450
ksys_write+0x64/0xe0
do_syscall_64+0x4b/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f68602d9833
Code: 8b 15 61 26 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 64 8b 04 25 18 00 00 00 85 c0 75 14 b8 01 00 00 00 08
RSP: 002b:00007fff9bbdf8e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f68602d9833
RDX: 0000000000000009 RSI: 00005614f3ebc740 RDI: 0000000000000001
RBP: 00005614f3ebc740 R08: 000000000000000a R09: 0000000000000008
R10: 00005614f3db6ba0 R11: 0000000000000246 R12: 0000000000000009
R13: 00007f68603bd6a0 R14: 0000000000000009 R15: 00007f68603b8880
For lockdep, there is a sanity check in lockdep_init_map_type(), the
lock-class key must either have been allocated statically or must
have been registered as a dynamic key. However the commit e18df2889ff9
("mm/hugetlb_cgroup: prepare cftypes based on template") has changed
the cftypes from static allocated objects to dynamic allocated objects,
so the cft->lockdep_key must be registered proactively.
[xiujianfeng@huawei.com: fix BUG()]
Link: https://lkml.kernel.org/r/20240619015527.2212698-1-xiujianfeng@huawei.com
Link: https://lkml.kernel.org/r/20240618071922.2127289-1-xiujianfeng@huawei.com
Link: https://lore.kernel.org/all/602186b3-5ce3-41b3-90a3-134792cc2a48@samsung.com/
Fixes: e18df2889ff9 ("mm/hugetlb_cgroup: prepare cftypes based on template")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406181046.8d8b2492-oliver.sang@intel.com
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: SeongJae Park <sj@kernel.org>
Closes: https://lore.kernel.org/20240618233608.400367-1-sj@kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/hugetlb_cgroup: rework on cftypes", v3.
This patchset provides an intuitive view of the control files through
static templates of cftypes. This improves the readability of the code.
This patch (of 3):
Currently the numa_stat file encodes 1 into .private using the micro
MEMFILE_PRIVATE() to identify the legacy. Actually, we can use
cgroup_subsys_on_dfl() instead. This is helpful to handle .private in the
static templates in the next patch.
Link: https://lkml.kernel.org/r/20240612092409.2027592-1-xiujianfeng@huawei.com
Link: https://lkml.kernel.org/r/20240612092409.2027592-2-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Today, we do not have any observability of per-page metadata and how much
it takes away from the machine capacity. Thus, we want to describe the
amount of memory that is going towards per-page metadata, which can vary
depending on build configuration, machine architecture, and system use.
This patch adds 2 fields to /proc/vmstat that can used as shown below:
Accounting per-page metadata allocated by boot-allocator:
/proc/vmstat:nr_memmap_boot * PAGE_SIZE
Accounting per-page metadata allocated by buddy-allocator:
/proc/vmstat:nr_memmap * PAGE_SIZE
Accounting total Perpage metadata allocated on the machine:
(/proc/vmstat:nr_memmap_boot +
/proc/vmstat:nr_memmap) * PAGE_SIZE
Utility for userspace:
Observability: Describe the amount of memory overhead that is going to
per-page metadata on the system at any given time since this overhead is
not currently observable.
Debugging: Tracking the changes or absolute value in struct pages can help
detect anomalies as they can be correlated with other metrics in the
machine (e.g., memtotal, number of huge pages, etc).
page_ext overheads: Some kernel features such as page_owner
page_table_check that use page_ext can be optionally enabled via kernel
parameters. Having the total per-page metadata information helps users
precisely measure impact. Furthermore, page-metadata metrics will reflect
the amount of struct pages reliquished (or overhead reduced) when
hugetlbfs pages are reserved which will vary depending on whether hugetlb
vmemmap optimization is enabled or not.
For background and results see:
lore.kernel.org/all/20240220214558.3377482-1-souravpanda@google.com
Link: https://lkml.kernel.org/r/20240605222751.1406125-1-souravpanda@google.com
Signed-off-by: Sourav Panda <souravpanda@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chen Linxuan <chenlinxuan@uniontech.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tomas Mudrunka <tomas.mudrunka@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
nid may be equal to NUMA_NO_NODE=-1. Prevent accessing node_data array by
invalid index with check for nid.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lkml.kernel.org/r/20240606080659.18525-1-abelova@astralinux.ru
Fixes: e83a437faa ("mm/memory_hotplug: introduce "auto-movable" online policy")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's make folio_mlock_step() simply a wrapper around folio_pte_batch(),
which will greatly reduce the cost of ptep_get() when scanning a range of
contptes.
Link: https://lkml.kernel.org/r/20240611010418.70797-1-ioworker0@gmail.com
Signed-off-by: Lance Yang <ioworker0@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: Barry Song <21cnbao@gmail.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: Bang Li <libang.li@antgroup.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Zswap does not support storing or loading large folios. Until proper
support is added, attempts to load large folios from zswap are a bug.
For example, if a swapin fault observes that contiguous PTEs are pointing
to contiguous swap entries and tries to swap them in as a large folio,
swap_read_folio() will pass in a large folio to zswap_load(), but
zswap_load() will only effectively load the first page in the folio. If
the first page is not in zswap, the folio will be read from disk, even
though other pages may be in zswap.
In both cases, this will lead to silent data corruption. Proper support
needs to be added before large folio swapins and zswap can work together.
Looking at callers of swap_read_folio(), it seems like they are either
allocated from __read_swap_cache_async() or do_swap_page() in the
SWP_SYNCHRONOUS_IO path. Both of which allocate order-0 folios, so
everything is fine for now.
However, there is ongoing work to add to support large folio swapins [1].
To make sure new development does not break zswap (or get broken by
zswap), add minimal handling of incorrect loads of large folios to zswap.
First, move the call folio_mark_uptodate() inside zswap_load().
If a large folio load is attempted, and zswap was ever enabled on the
system, return 'true' without calling folio_mark_uptodate(). This will
prevent the folio from being read from disk, and will emit an IO error
because the folio is not uptodate (e.g. do_swap_fault() will return
VM_FAULT_SIGBUS). It may not be reliable recovery in all cases, but it is
better than nothing.
This was tested by hacking the allocation in __read_swap_cache_async() to
use order 2 and __GFP_COMP.
In the future, to handle this correctly, the swapin code should:
(a) Fall back to order-0 swapins if zswap was ever used on the
machine, because compressed pages remain in zswap after it is
disabled.
(b) Add proper support to swapin large folios from zswap (fully or
partially).
Probably start with (a) then followup with (b).
[1]https://lore.kernel.org/linux-mm/20240304081348.197341-6-21cnbao@gmail.com/
Link: https://lkml.kernel.org/r/20240611024516.1375191-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Barry Song <baohua@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add zswap_never_enabled() to skip the xarray lookup in zswap_load() if
zswap was never enabled on the system. It is implemented using static
branches for efficiency, as enabling zswap should be a rare event. This
could shave some cycles off zswap_load() when CONFIG_ZSWAP is used but
zswap is never enabled.
However, the real motivation behind this patch is two-fold:
- Incoming large folio swapin work will need to fallback to order-0
folios if zswap was ever enabled, because any part of the folio could be
in zswap, until proper handling of large folios with zswap is added.
- A warning and recovery attempt will be added in a following change in
case the above was not done incorrectly. Zswap will fail the read if
the folio is large and it was ever enabled.
Expose zswap_never_enabled() in the header for the swapin work to use
it later.
[yosryahmed@google.com: expose zswap_never_enabled() in the header]
Link: https://lkml.kernel.org/r/Zmjf0Dr8s9xSW41X@google.com
Link: https://lkml.kernel.org/r/20240611024516.1375191-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for introducing a similar function, rename
is_zswap_enabled() to use zswap_* prefix like other zswap functions.
Link: https://lkml.kernel.org/r/20240611024516.1375191-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current call flow looks like this:
start_kernel
mm_core_init
mem_init
mem_init_print_info
rest_init
kernel_init
kernel_init_freeable
page_alloc_init_late
deferred_init_memmap
If CONFIG_DEFERRED_STRUCT_PAGE_INIT, the time mem_init_print_info()
calls, pages are not totally initialized and freed to buddy.
This has one issue
* nr_free_pages() just contains partial free pages in the system,
which is not we expect.
Let's print the mem info after defer_init is done.
Also this would help changing totalram_pages accounting, since we plan
to move the accounting into __free_pages_core().
Link: https://lkml.kernel.org/r/20240611145223.16872-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Setting 'limit' variable to 0 might seem like it means "no limit". But in
the memblock API, 0 actually means the 'MEMBLOCK_ALLOC_ACCESSIBLE' enum,
which limits the physical address range end based on
'memblock.current_limit'. This could be confusing.
Use the enum instead of 0 to make it clear.
Link: https://lkml.kernel.org/r/20240610151528.943680-1-lsahn@wewakecorp.com
Signed-off-by: Leesoo Ahn <lsahn@ooseel.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the user no longer requires the pages, they would use
madvise(MADV_FREE) to mark the pages as lazy free. Subsequently, they
typically would not re-write to that memory again.
During memory reclaim, if we detect that the large folio and its PMD are
both still marked as clean and there are no unexpected references (such as
GUP), so we can just discard the memory lazily, improving the efficiency
of memory reclamation in this case.
On an Intel i5 CPU, reclaiming 1GiB of lazyfree THPs using
mem_cgroup_force_empty() results in the following runtimes in seconds
(shorter is better):
--------------------------------------------
| Old | New | Change |
--------------------------------------------
| 0.683426 | 0.049197 | -92.80% |
--------------------------------------------
[ioworker0@gmail.com: minor changes per David]
Link: https://lkml.kernel.org/r/20240622100057.3352-1-ioworker0@gmail.com
Link: https://lkml.kernel.org/r/20240614015138.31461-4-ioworker0@gmail.com
Signed-off-by: Lance Yang <ioworker0@gmail.com>
Suggested-by: Zi Yan <ziy@nvidia.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Bang Li <libang.li@antgroup.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Fangrui Song <maskray@google.com>
Cc: Jeff Xie <xiehuan09@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for supporting try_to_unmap_one() to unmap PMD-mapped
folios, start the pagewalk first, then call split_huge_pmd_address() to
split the folio.
Link: https://lkml.kernel.org/r/20240614015138.31461-3-ioworker0@gmail.com
Signed-off-by: Lance Yang <ioworker0@gmail.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Bang Li <libang.li@antgroup.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Fangrui Song <maskray@google.com>
Cc: Jeff Xie <xiehuan09@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Reclaim lazyfree THP without splitting", v8.
This series adds support for reclaiming PMD-mapped THP marked as lazyfree
without needing to first split the large folio via
split_huge_pmd_address().
When the user no longer requires the pages, they would use
madvise(MADV_FREE) to mark the pages as lazy free. Subsequently, they
typically would not re-write to that memory again.
During memory reclaim, if we detect that the large folio and its PMD are
both still marked as clean and there are no unexpected references(such as
GUP), so we can just discard the memory lazily, improving the efficiency
of memory reclamation in this case.
Performance Testing
===================
On an Intel i5 CPU, reclaiming 1GiB of lazyfree THPs using
mem_cgroup_force_empty() results in the following runtimes in seconds
(shorter is better):
--------------------------------------------
| Old | New | Change |
--------------------------------------------
| 0.683426 | 0.049197 | -92.80% |
--------------------------------------------
This patch (of 8):
Introduce the labels walk_done and walk_abort as exit points to eliminate
duplicated exit code in the pagewalk loop.
Link: https://lkml.kernel.org/r/20240614015138.31461-1-ioworker0@gmail.com
Link: https://lkml.kernel.org/r/20240614015138.31461-2-ioworker0@gmail.com
Signed-off-by: Lance Yang <ioworker0@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Cc: Bang Li <libang.li@antgroup.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Jeff Xie <xiehuan09@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Most of the work done in folio_start_writeback is reversed in
folio_end_writeback. For e.g. NR_WRITEBACK and NR_ZONE_WRITE_PENDING are
incremented in start_writeback and decremented in end_writeback. Calling
end_writeback immediately after start_writeback (separated by
folio_unlock) cancels the affect of most of the work done in start hence
can be removed.
There is some extra work done in folio_end_writeback, however it is
incorrect/not applicable to zswap:
- folio_end_writeback incorrectly increments NR_WRITTEN counter,
eventhough the pages aren't written to disk, hence this change
corrects this behaviour.
- folio_end_writeback calls folio_rotate_reclaimable, but that only
makes sense for async writeback pages, while for zswap pages are
synchronously reclaimed.
Link: https://lkml.kernel.org/r/20240612100109.1616626-1-usamaarif642@gmail.com
Link: https://lkml.kernel.org/r/20240610143037.812955-1-usamaarif642@gmail.com
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch leverages the new pte_needs_soft_dirty_wp() helper to optimize
a scenario where softdirty is enabled, but the softdirty flag has already
been set in do_swap_page(). In this situation, we can use pte_mkwrite
instead of applying write-protection since we don't depend on write
faults.
Link: https://lkml.kernel.org/r/20240607211358.4660-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and
utilize them", v2.
This patchset introduces the pte_need_soft_dirty_wp and
pmd_need_soft_dirty_wp helpers to determine if write protection is
required for softdirty tracking. These helpers enhance code readability
and improve the overall appearance.
They are then utilized in gup, mprotect, swap, and other related
functions.
This patch (of 2):
This patch introduces the pte_needs_soft_dirty_wp and
pmd_needs_soft_dirty_wp helpers to determine if write protection is
required for softdirty tracking. This can enhance code readability and
improve its overall appearance. These new helpers are then utilized in
gup, huge_memory, and mprotect.
Link: https://lkml.kernel.org/r/20240607211358.4660-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240607211358.4660-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit [1] introduced IO polling support duding swapin to reduce swap read
latency for block devices that can be polled. However later commit [2]
removed polling support. Commit [3] removed the remnants of polling
support from read_swap_cache_async() and __read_swap_cache_async().
However, it left behind some remnants in swap_read_folio(), the
'synchronous' argument.
swap_read_folio() reads the folio synchronously if synchronous=true or if
SWP_SYNCHRONOUS_IO is set in swap_info_struct. The only caller that
passes synchronous=true is in do_swap_page() in the SWP_SYNCHRONOUS_IO
case.
Hence, the argument is redundant, it is only set to true when the swap
read would have been synchronous anyway. Remove it.
[1] Commit 23955622ff ("swap: add block io poll in swapin path")
[2] Commit 9650b453a3 ("block: ignore RWF_HIPRI hint for sync dio")
[3] Commit b243dcbf2f ("swap: remove remnants of polling from read_swap_cache_async")
Link: https://lkml.kernel.org/r/20240607045515.1836558-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It looks rather weird that totalhigh_pages() returns an "unsigned long"
but nr_free_highpages() returns an "unsigned int".
Let's return an "unsigned long" from nr_free_highpages() to be consistent.
While at it, use a plain "0" instead of a "0UL" in the !CONFIG_HIGHMEM
totalhigh_pages() implementation, to make these look alike as well.
Link: https://lkml.kernel.org/r/20240607083711.62833-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/highmem: don't track highmem pages manually".
Let's remove highmem special-casing from adjust_managed_page_count(), to
result in less confusion why memblock manually adjusts totalram_pages, and
__free_pages_core() only adjusts the zone's managed pages -- what about
the highmem pages that adjust_managed_page_count() updates?
Now, we only maintain totalram_pages and a zone's managed pages
independent of highmem support. We can derive the number of highmem pages
simply by looking at the relevant zone's managed pages. I don't think
there is any particular fast path that needs a maximum-efficient
totalhigh_pages() implementation.
Note that highmem memory is currently initialized using
free_highmem_page()->free_reserved_page(), not __free_pages_core(). In
the future we might want to also use __free_pages_core() to initialize
highmem memory, to make that less special, and consider moving
totalram_pages updates into __free_pages_core() [1], so we can just use
adjust_managed_page_count() in there as well.
Booting a simple kernel in QEMU reveals no highmem accounting change:
Before:
Memory: 3095448K/3145208K available (14802K kernel code, 2073K rwdata,
5000K rodata, 740K init, 556K bss, 49760K reserved, 0K cma-reserved,
2244488K highmem)
After:
Memory: 3095276K/3145208K available (14802K kernel code, 2073K rwdata,
5000K rodata, 740K init, 556K bss, 49932K reserved, 0K cma-reserved,
2244488K highmem)
[1] https://lkml.kernel.org/r/20240601133402.2675-1-richard.weiyang@gmail.com
This patch (of 2):
Can we get rid of the highmem ifdef in adjust_managed_page_count()?
Likely yes: we don't have that many totalhigh_pages() users, and they all
don't seem to be very performance critical.
So let's implement totalhigh_pages() like nr_free_highpages(), collecting
information from all zones. This is now similar to what we do in
si_meminfo_node() to collect the per-node highmem page count.
In the common case (single node, 3-4 zones), we really shouldn't care. We
could optimize a bit further (only walk ZONE_HIGHMEM and ZONE_MOVABLE if
required), but there doesn't seem a real need for that.
[david@redhat.com: fix build bot complaint]
Link: https://lkml.kernel.org/r/b57e5bc4-eb72-40e3-add4-57dfa6e03df6@redhat.com
Link: https://lkml.kernel.org/r/20240607083711.62833-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240607083711.62833-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After swapping out, we perform a swap-in operation. If we first read and
then write, we encounter a major fault in do_swap_page for reading, along
with additional minor faults in do_wp_page for writing. However, the
latter appears to be unnecessary and inefficient. Instead, we can
directly reuse in do_swap_page and completely eliminate the need for
do_wp_page.
This patch achieves that optimization specifically for exclusive folios.
The following microbenchmark demonstrates the significant reduction in
minor faults.
#define DATA_SIZE (2UL * 1024 * 1024)
#define PAGE_SIZE (4UL * 1024)
static void *read_write_data(char *addr)
{
char tmp;
for (int i = 0; i < DATA_SIZE; i += PAGE_SIZE) {
tmp = *(volatile char *)(addr + i);
*(volatile char *)(addr + i) = tmp;
}
}
int main(int argc, char **argv)
{
struct rusage ru;
char *addr = mmap(NULL, DATA_SIZE, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
memset(addr, 0x11, DATA_SIZE);
do {
long old_ru_minflt, old_ru_majflt;
long new_ru_minflt, new_ru_majflt;
madvise(addr, DATA_SIZE, MADV_PAGEOUT);
getrusage(RUSAGE_SELF, &ru);
old_ru_minflt = ru.ru_minflt;
old_ru_majflt = ru.ru_majflt;
read_write_data(addr);
getrusage(RUSAGE_SELF, &ru);
new_ru_minflt = ru.ru_minflt;
new_ru_majflt = ru.ru_majflt;
printf("minor faults:%ld major faults:%ld\n",
new_ru_minflt - old_ru_minflt,
new_ru_majflt - old_ru_majflt);
} while(0);
return 0;
}
w/o patch,
/ # ~/a.out
minor faults:512 major faults:512
w/ patch,
/ # ~/a.out
minor faults:0 major faults:512
Minor faults decrease to 0!
Link: https://lkml.kernel.org/r/20240602004502.26895-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The call for memblock_phys_free() in try_remove_memory() does not balance
any call to memblock_alloc() (or memblock_reserve() for that matter).
There are no memblock_reserve() calls in mm/memory_hotplug.c, no memblock
allocations possible after mm_core_init(), and even if memblock_add_node()
called from add_memory_resource() would need to allocate memory, that
memory would ba allocated from slab.
The patch f9126ab924 ("memory-hotplug: fix wrong edge when hot add a new
node") that introduced that call to memblock_free() does not provide
adequate description why that was required and tinkering with memblock in
the context of memory hotplug on x86 seems bogus because x86 never kept
memblock after boot anyway.
Drop memblock_phys_free() call in try_remove_memory().
[rppt@kernel.org: rewrite the commit message]
Link: https://lkml.kernel.org/r/20240605082049.973242-1-rppt@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add mTHP counters for anonymous shmem.
[baolin.wang@linux.alibaba.com: update Documentation/admin-guide/mm/transhuge.rst]
Link: https://lkml.kernel.org/r/d86e2e7f-4141-432b-b2ba-c6691f36ef0b@linux.alibaba.com
Link: https://lkml.kernel.org/r/4fd9e467d49ae4a747e428bcd821c7d13125ae67.1718090413.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lance Yang <ioworker0@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Although the top-level hugepage allocation can be turned off, anonymous
shmem can still use mTHP by configuring the sysfs interface located at
'/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled'.
Therefore, add alignment for mTHP size to provide a suitable alignment
address in shmem_get_unmapped_area().
Link: https://lkml.kernel.org/r/0c549b57cf7db07503af692d8546ecfad0fcce52.1718090413.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Lance Yang <ioworker0@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 19eaf44954 adds multi-size THP (mTHP) for anonymous pages, that
can allow THP to be configured through the sysfs interface located at
'/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled'.
However, the anonymous shmem will ignore the anonymous mTHP rule
configured through the sysfs interface, and can only use the PMD-mapped
THP, that is not reasonable. Users expect to apply the mTHP rule for all
anonymous pages, including the anonymous shmem, in order to enjoy the
benefits of mTHP. For example, lower latency than PMD-mapped THP, smaller
memory bloat than PMD-mapped THP, contiguous PTEs on ARM architecture to
reduce TLB miss etc. In addition, the mTHP interfaces can be extended to
support all shmem/tmpfs scenarios in the future, especially for the shmem
mmap() case.
The primary strategy is similar to supporting anonymous mTHP. Introduce a
new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled',
which can have almost the same values as the top-level
'/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new
additional "inherit" option and dropping the testing options 'force' and
'deny'. By default all sizes will be set to "never" except PMD size,
which is set to "inherit". This ensures backward compatibility with the
anonymous shmem enabled of the top level, meanwhile also allows
independent control of anonymous shmem enabled for each mTHP.
Link: https://lkml.kernel.org/r/65796c1e72e51e15f3410195b5c2d5b6c160d411.1718090413.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To support the use of mTHP with anonymous shmem, add a new sysfs interface
'shmem_enabled' in the '/sys/kernel/mm/transparent_hugepage/hugepages-kB/'
directory for each mTHP to control whether shmem is enabled for that mTHP,
with a value similar to the top level 'shmem_enabled', which can be set
to: "always", "inherit (to inherit the top level setting)", "within_size",
"advise", "never". An 'inherit' option is added to ensure compatibility
with these global settings, and the options 'force' and 'deny' are
dropped, which are rather testing artifacts from the old ages.
By default, PMD-sized hugepages have enabled="inherit" and all other
hugepage sizes have enabled="never" for
'/sys/kernel/mm/transparent_hugepage/hugepages-xxkB/shmem_enabled'.
In addition, if top level value is 'force', then only PMD-sized hugepages
have enabled="inherit", otherwise configuration will be failed and vice
versa. That means now we will avoid using non-PMD sized THP to override
the global huge allocation.
[baolin.wang@linux.alibaba.com: fix transhuge.rst indentation]
Link: https://lkml.kernel.org/r/b189d815-998b-4dfd-ba89-218ff51313f8@linux.alibaba.com
[akpm@linux-foundation.org: reflow transhuge.rst addition to 80 cols]
[baolin.wang@linux.alibaba.com: move huge_shmem_orders_lock under CONFIG_SYSFS]
Link: https://lkml.kernel.org/r/eb34da66-7f12-44f3-a39e-2bcc90c33354@linux.alibaba.com
[akpm@linux-foundation.org: huge_memory.c needs mm_types.h]
Link: https://lkml.kernel.org/r/ffddfa8b3cb4266ff963099ab78cfd7184c57ac7.1718090413.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order to extend support for mTHP, add THP validation for PMD-mapped THP
related statistics to avoid statistical confusion.
Link: https://lkml.kernel.org/r/c4b04cbd51e6951cc2436a87be8eaa4a1516faec.1718090413.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Barry Song <v-songbaohua@oppo.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "add mTHP support for anonymous shmem", v5.
Anonymous pages have already been supported for multi-size (mTHP)
allocation through commit 19eaf44954, that can allow THP to be
configured through the sysfs interface located at
'/sys/kernel/mm/transparent_hugepage/hugepage-XXkb/enabled'.
However, the anonymous shmem will ignore the anonymous mTHP rule
configured through the sysfs interface, and can only use the PMD-mapped
THP, that is not reasonable. Many implement anonymous page sharing
through mmap(MAP_SHARED | MAP_ANONYMOUS), especially in database usage
scenarios, therefore, users expect to apply an unified mTHP strategy for
anonymous pages, also including the anonymous shared pages, in order to
enjoy the benefits of mTHP. For example, lower latency than PMD-mapped
THP, smaller memory bloat than PMD-mapped THP, contiguous PTEs on ARM
architecture to reduce TLB miss etc.
As discussed in the bi-weekly MM meeting[1], the mTHP controls should
control all of shmem, not only anonymous shmem, but support will be added
iteratively. Therefore, this patch set starts with support for anonymous
shmem.
The primary strategy is similar to supporting anonymous mTHP. Introduce a
new interface '/mm/transparent_hugepage/hugepage-XXkb/shmem_enabled',
which can have almost the same values as the top-level
'/sys/kernel/mm/transparent_hugepage/shmem_enabled', with adding a new
additional "inherit" option and dropping the testing options 'force' and
'deny'. By default all sizes will be set to "never" except PMD size,
which is set to "inherit". This ensures backward compatibility with the
anonymous shmem enabled of the top level, meanwhile also allows
independent control of anonymous shmem enabled for each mTHP.
Use the page fault latency tool to measure the performance of 1G anonymous shmem
with 32 threads on my machine environment with: ARM64 Architecture, 32 cores,
125G memory:
base: mm-unstable
user-time sys_time faults_per_sec_per_cpu faults_per_sec
0.04s 3.10s 83516.416 2669684.890
mm-unstable + patchset, anon shmem mTHP disabled
user-time sys_time faults_per_sec_per_cpu faults_per_sec
0.02s 3.14s 82936.359 2630746.027
mm-unstable + patchset, anon shmem 64K mTHP enabled
user-time sys_time faults_per_sec_per_cpu faults_per_sec
0.08s 0.31s 678630.231 17082522.495
From the data above, it is observed that the patchset has a minimal impact
when mTHP is not enabled (some fluctuations observed during testing).
When enabling 64K mTHP, there is a significant improvement of the page
fault latency.
[1] https://lore.kernel.org/all/f1783ff0-65bd-4b2b-8952-52b6822a0835@redhat.com/
This patch (of 6):
Add large folio mapping establishment support for finish_fault() as a
preparation, to support multi-size THP allocation of anonymous shmem pages
in the following patches.
Keep the same behavior (per-page fault) for non-anon shmem to avoid
inflating the RSS unintentionally, and we can discuss what size of mapping
to build when extending mTHP to control non-anon shmem in the future.
[baolin.wang@linux.alibaba.com: avoid going beyond the PMD pagetable size]
Link: https://lkml.kernel.org/r/b0e6a8b1-a32c-459e-ae67-fde5d28773e6@linux.alibaba.com
[baolin.wang@linux.alibaba.com: use 'PTRS_PER_PTE' instead of 'PTRS_PER_PTE - 1']
Link: https://lkml.kernel.org/r/e1f5767a-2c9b-4e37-afe6-1de26fe54e41@linux.alibaba.com
Link: https://lkml.kernel.org/r/cover.1718090413.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/3a190892355989d42f59cf9f2f98b94694b0d24d.1718090413.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Nobody checks the error flag any more, so setting it accomplishes nothing.
Remove the obsolete parts of this comment; it hasn't been true since
errseq_t was used to track writeback errors in 2017.
Link: https://lkml.kernel.org/r/20240531032938.2712870-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace PFNs with addresses in readahead window calculation. This
simplified the logic and reduce the code line number.
No functionality change is expected.
Link: https://lkml.kernel.org/r/20240531081230.310128-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When VMA based swap readahead is introduced in commit ec560175c0 ("mm,
swap: VMA based swap readahead"), "struct vma_swap_readahead" is defined
to describe the readahead window. Because we wanted to save the PTE
entries in the struct at that time. But after commit 4f8fcf4ced
("mm/swap: swap_vma_readahead() do the pte_offset_map()"), we no longer
save PTE entries in the struct. The size of the struct becomes so small,
that it's better to use the fields of the struct directly. This can
simplify the code to improve the code readability. The line number of
source code reduces too.
No functionality change is expected in this patch.
Link: https://lkml.kernel.org/r/20240531081230.310128-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm,swap: cleanup VMA based swap readahead window
calculation".
When VMA based swap readahead is introduced in commit ec560175c0 ("mm,
swap: VMA based swap readahead"), "struct vma_swap_readahead" is defined
to describe the readahead window. Because we wanted to save the PTE
entries in the struct at that time. But after commit 4f8fcf4ced
("mm/swap: swap_vma_readahead() do the pte_offset_map()"), we no longer
save PTE entries in the struct. The size of the struct becomes so small,
that it's better to use the fields of the struct directly. This can
simplify the code to improve the code readability. The line number of
source code reduces too.
A theoretical underflow issue and some related code cleanup is done in the
series too.
This patch (of 3):
In swap readahead window calculation, if the fault PFN is smaller than the
readahead window size, underflow may occurs. This is only possible in
theory, because the start of the virtual address space will not be used
for anonymous pages in practice. Even if underflow occurs, there will be
no functional bugs. In the worst cases, some swap entries may be swapped
in incorrectly and some pages may be allocate on the wrong nodes.
Anyway, we still needs to fix the issue via some underflow checking.
Link: https://lkml.kernel.org/r/20240531081230.310128-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20240531081230.310128-2-ying.huang@intel.com
Fixes: ec560175c0 ("mm, swap: VMA based swap readahead")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use existing swap() function rather than duplicating its implementation.
./mm/userfaultfd.c:1006:13-14: WARNING opportunity for swap()
Link: https://lkml.kernel.org/r/20240531091643.67778-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9266
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Consistently name the return variable with an _nr suffix, whenever calling
pfn_to_section_nr(), to avoid confusion with a (struct mem_section *).
Link: https://lkml.kernel.org/r/20240531124144.240399-1-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a regression test to ensure that kmsan_unpoison_memory() works the
same as an unpoisoning operation added by the instrumentation.
The test has two subtests: one that checks the instrumentation, and one
that checks kmsan_unpoison_memory(). Each subtest initializes the first
byte of a 4-byte buffer, then checks that the other 3 bytes are
uninitialized.
[glider@google.com: change description, remove comment about failing test case]
Link: https://lkml.kernel.org/r/20240528104807.738758-2-glider@google.com
Signed-off-by: Brian Johannesmeyer <bjohannesmeyer@gmail.com>
Link: https://lore.kernel.org/lkml/20240524232804.1984355-1-bjohannesmeyer@gmail.com/T/
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By using a folio in scan_movable_pages() we convert the last user of the
page-based hugetlb information macro functions to the folio version.
After this conversion, we can safely remove the page-based definitions
from include/linux/hugetlb.h.
Link: https://lkml.kernel.org/r/20240530171427.242018-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a large folio is found in the swapcache, the current implementation
requires calling do_swap_page() nr_pages times, resulting in nr_pages page
faults. This patch opts to map the entire large folio at once to minimize
page faults. Additionally, redundant checks and early exits for ARM64 MTE
restoring are removed.
Link: https://lkml.kernel.org/r/20240529082824.150954-7-21cnbao@gmail.com
Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com>
Co-developed-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function should_try_to_free_swap() operates under the assumption that
swap-in always occurs at the normal page granularity, i.e.,
folio_nr_pages() = 1. However, in reality, for large folios,
add_to_swap_cache() will invoke folio_ref_add(folio, nr). To accommodate
large folio swap-in, this patch eliminates this assumption.
Link: https://lkml.kernel.org/r/20240529082824.150954-6-21cnbao@gmail.com
Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com>
Co-developed-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Should do_swap_page() have the capability to directly map a large folio,
metadata restoration becomes necessary for a specified number of pages
denoted as nr. It's important to highlight that metadata restoration is
solely required by the SPARC platform, which, however, does not enable
THP_SWAP. Consequently, in the present kernel configuration, there exists
no practical scenario where users necessitate the restoration of nr
metadata. Platforms implementing THP_SWAP might invoke this function with
nr values exceeding 1, subsequent to do_swap_page() successfully mapping
an entire large folio. Nonetheless, their arch_do_swap_page_nr()
functions remain empty.
Link: https://lkml.kernel.org/r/20240529082824.150954-5-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There could arise a necessity to obtain the first pte_t from a swap pte_t
located in the middle. For instance, this may occur within the context of
do_swap_page(), where a page fault can potentially occur in any PTE of a
large folio. To address this, the following patch introduces
pte_move_swp_offset(), a function capable of bidirectional movement by a
specified delta argument. Consequently, pte_next_swp_offset() will
directly invoke it with delta = 1.
Link: https://lkml.kernel.org/r/20240529082824.150954-4-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To streamline maintenance efforts, we propose removing the implementation
of swap_free(). Instead, we can simply invoke swap_free_nr() with nr set
to 1. swap_free_nr() is designed with a bitmap consisting of only one
long, resulting in overhead that can be ignored for cases where nr equals
1.
A prime candidate for leveraging swap_free_nr() lies within
kernel/power/swap.c. Implementing this change facilitates the adoption of
batch processing for hibernation.
Link: https://lkml.kernel.org/r/20240529082824.150954-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "large folios swap-in: handle refault cases first", v5.
This patchset is extracted from the large folio swapin series[1],
primarily addressing the handling of scenarios involving large folios in
the swap cache. Currently, it is particularly focused on addressing the
refaulting of mTHP, which is still undergoing reclamation. This approach
aims to streamline code review and expedite the integration of this
segment into the MM tree.
It relies on Ryan's swap-out series[2], leveraging the helper function
swap_pte_batch() introduced by that series.
Presently, do_swap_page only encounters a large folio in the swap cache
before the large folio is released by vmscan. However, the code should
remain equally useful once we support large folio swap-in via
swapin_readahead(). This approach can effectively reduce page faults and
eliminate most redundant checks and early exits for MTE restoration in
recent MTE patchset[3].
The large folio swap-in for SWP_SYNCHRONOUS_IO and swapin_readahead() will
be split into separate patch sets and sent at a later time.
[1] https://lore.kernel.org/linux-mm/20240304081348.197341-1-21cnbao@gmail.com/
[2] https://lore.kernel.org/linux-mm/20240408183946.2991168-1-ryan.roberts@arm.com/
[3] https://lore.kernel.org/linux-mm/20240322114136.61386-1-21cnbao@gmail.com/
This patch (of 6):
While swapping in a large folio, we need to free swaps related to the
whole folio. To avoid frequently acquiring and releasing swap locks, it
is better to introduce an API for batched free. Furthermore, this new
function, swap_free_nr(), is designed to efficiently handle various
scenarios for releasing a specified number, nr, of swap entries.
Link: https://lkml.kernel.org/r/20240529082824.150954-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240529082824.150954-2-21cnbao@gmail.com
Signed-off-by: Chuanhua Han <hanchuanhua@oppo.com>
Co-developed-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A lot of intricacies go into updating the stats when adding or removing
mappings: which stat index to use and which function. Abstract this away
into a new static helper in rmap.c, __folio_mod_stat().
This adds an unnecessary call to folio_test_anon() in
__folio_add_anon_rmap() and __folio_add_file_rmap(). However, the folio
struct should already be in the cache at this point, so it shouldn't cause
any noticeable overhead.
No functional change intended.
[hughd@google.com: fix /proc/meminfo]
Link: https://lkml.kernel.org/r/49914517-dfc7-e784-fde0-0e08fafbecc2@google.com
Link: https://lkml.kernel.org/r/20240506211333.346605-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A variable name 'page' is used in zswap_is_folio_same_filled() and
zswap_fill_page() to point at the kmapped data in a folio. Use 'data'
instead to avoid confusion and stop it from showing up when searching
for 'page' references in mm/zswap.c.
While we are at it, move the kmap/kunmap calls into zswap_fill_page(),
make it take in a folio, and rename it to zswap_fill_folio().
Link: https://lkml.kernel.org/r/20240524033819.1953587-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eliminate the last explicit 'struct page' reference in mm/zswap.c.
Link: https://lkml.kernel.org/r/20240524033819.1953587-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: zswap: trivial folio conversions".
Some trivial folio conversions in zswap code.
This patch (of 3):
sg_set_folio() is equivalent to sg_set_page() for order-0 folios, which
are the only ones supported by zswap. Now zswap_decompress() can take in
a folio directly.
Link: https://lkml.kernel.org/r/20240524033819.1953587-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20240524033819.1953587-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 2916ecc0f9 ("mm/migrate: new migrate mode MIGRATE_SYNC_NO_COPY")
introduce a new MIGRATE_SYNC_NO_COPY mode to allow to offload the copy to
a device DMA engine, which is only used __migrate_device_pages() to decide
whether or not copy the old page, and the MIGRATE_SYNC_NO_COPY mode only
set in hmm, as the MIGRATE_SYNC_NO_COPY set is removed by previous
cleanup, it seems that we could remove the unnecessary
MIGRATE_SYNC_NO_COPY.
Link: https://lkml.kernel.org/r/20240524052843.182275-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
migrate_folio_extra() is only called in migrate.c now, convert it a static
function and take a new src_private argument which could be shared by
migrate_folio() and filemap_migrate_folio() to simplify code a bit.
Link: https://lkml.kernel.org/r/20240524052843.182275-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The __migrate_device_pages() won't copy page so MIGRATE_SYNC_NO_COPY
passed into migrate_folio()/migrate_folio_extra(), actually a easy way is
just to call folio_migrate_mapping()/folio_migrate_flags(), converting it
to unify and simplify the migrate device pages, which also remove the only
call for MIGRATE_SYNC_NO_COPY.
Link: https://lkml.kernel.org/r/20240524052843.182275-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use a newfolio instead of newpage and convert to more folio api in
__migrate_device_pages().
Link: https://lkml.kernel.org/r/20240524052843.182275-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: cleanup MIGRATE_SYNC_NO_COPY mode".
Commit 2916ecc0f9 ("mm/migrate: new migrate mode MIGRATE_SYNC_NO_COPY")
introduce a new MIGRATE_SYNC_NO_COPY mode to allow to offload the copy to
a device DMA engine, which is only used __migrate_device_pages() to decide
whether or not copy the old page, and the MIGRATE_SYNC_NO_COPY mode only
used in hmm, a easy way is just to call the folio_migrate_mapping() and
folio_migrate_flags(), which help to remove the MIGRATE_SYNC_NO_COPY mode.
This patch (of 5):
Use filemap_migrate_folio() helper to simplify __buffer_migrate_folio().
Link: https://lkml.kernel.org/r/20240524052843.182275-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20240524052843.182275-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page_memcg() only called by mod_memcg_page_state(), so squash it to
cleanup page_memcg().
Link: https://lkml.kernel.org/r/20240524014950.187805-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change the llist_for_each_entry_safe function to the llist_for_each_entry
function and delete the next variable. Because the linked list is not
modified,the llist_for_each_entry_safe function is not required. No
functional changes are intended.
Link: https://lkml.kernel.org/r/20240513075830.2611-1-liyifei28@huawei.com
Signed-off-by: Yifei Li <liyifei28@huawei.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: add missing MODULE_DESCRIPTION() macros".
This fixes the instances of "WARNING: modpost: missing
MODULE_DESCRIPTION()" that I'm seeing in mm/.
This patch (of 4):
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in mm/hwpoison-inject.o
Link: https://lkml.kernel.org/r/20240513-mm-md-v1-0-8c20e7d26842@quicinc.com
Link: https://lkml.kernel.org/r/20240513-mm-md-v1-1-8c20e7d26842@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Execs of dynamically linked binaries at 20-ish cores are bottlenecked on
the i_mmap_rwsem semaphore, while the biggest singular contributor is
free_pgd_range inducing the lock acquire back-to-back for all consecutive
mappings of a given file.
Tracing the count of said acquires while building the kernel shows:
[1, 2) 799579 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[2, 3) 0 | |
[3, 4) 3009 | |
[4, 5) 3009 | |
[5, 6) 326442 |@@@@@@@@@@@@@@@@@@@@@ |
So in particular there were 326442 opportunities to coalesce 5 acquires
into 1.
Doing so increases execs per second by 4% (~50k to ~52k) when running
the benchmark linked below.
The lock remains the main bottleneck, I have not looked at other spots
yet.
Bench can be found here:
http://apollo.backplane.com/DFlyMisc/doexec.c
$ cc -O2 -o shared-doexec doexec.c
$ ./shared-doexec $(nproc)
Note this particular test makes sure binaries are separate, but the
loader is shared.
Stats collected on the patched kernel (+ "noinline") with:
bpftrace -e 'kprobe:unlink_file_vma_batch_process
{ @ = lhist(((struct unlink_vma_file_batch *)arg0)->count, 0, 8, 1); }'
Link: https://lkml.kernel.org/r/20240521234321.359501-1-mjguzik@gmail.com
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While handling hwpoison in a THP page, it is possible that
try_to_split_thp_page() fails. For example, when the THP page has been
RDMA pinned. At this point, the kernel cannot isolate the poisoned THP
page, all it could do is to send a SIGBUS to the user process with
meaningful payload to give user-level recovery a chance.
Link: https://lkml.kernel.org/r/20240524215306.2705454-6-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <oalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move hwpoison_filter() higher up as there is no need to spend a lot cycles
only to find out later that the page is supposed to be skipped from
hwpoison handling.
Link: https://lkml.kernel.org/r/20240524215306.2705454-5-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <oalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Added two explicit MF_MSG messages describing failure in
get_hwpoison_page. Attemped to document the definition of various action
names, and made a few adjustment to the action_result() calls.
Link: https://lkml.kernel.org/r/20240524215306.2705454-4-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <oalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The soft hwpoison injector via madvise(MADV_HWPOISON) operates in a
synchrous way in a sense, the injector is also a process under test, and
should it have the poisoned page mapped in its address space, it should
get killed as much as in a real UE situation. Doing so align with what
the madvise(2) man page says: " "This operation may result in the calling
process receiving a SIGBUS and the page being unmapped."
Link: https://lkml.kernel.org/r/20240524215306.2705454-3-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Oscar Salvador <oalvador@suse.de>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Enhance soft hwpoison handling and injection", v4.
This series is aimed at the following enhancements:
- Let one hwpoison injector, that is, madvise(MADV_HWPOISON) to behave
more like as if a real UE occurred. Because the other two injectors
such as hwpoison-inject and the 'einj' on x86 can't, and it seems to me
we need a better simulation to real UE scenario.
- For years, if the kernel is unable to unmap a hwpoisoned page, it send
a SIGKILL instead of SIGBUS to prevent user process from potentially
accessing the page again. But in doing so, the user process also lose
important information: vaddr, for recovery. Fortunately, the kernel
already has code to kill process re-accessing a hwpoisoned page, so
remove the '!unmap_success' check.
- Right now, if a thp page under GUP longterm pin is hwpoisoned, and
kernel cannot split the thp page, memory-failure simply ignores the UE
and returns. That's not ideal, it could deliver a SIGBUS with useful
information for userspace recovery.
This patch (of 5):
For years when it comes down to kill a process due to hwpoison, a SIGBUS
is delivered only if unmap has been successful. Otherwise, a SIGKILL is
delivered. And the reason for that is to prevent the involved process
from accessing the hwpoisoned page again.
Since then a lot has changed, a hwpoisoned page is marked and upon being
re-accessed, the memory-failure handler invokes kill_accessing_process()
to kill the process immediately. So let's take out the '!unmap_success'
factor and try to deliver SIGBUS if possible.
Link: https://lkml.kernel.org/r/20240524215306.2705454-1-jane.chu@oracle.com
Link: https://lkml.kernel.org/r/20240524215306.2705454-2-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <oalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let us simplify the code by update_mmu_tlb_range().
Link: https://lkml.kernel.org/r/20240522061204.117421-4-libang.li@antgroup.com
Signed-off-by: Bang Li <libang.li@antgroup.com>
Reviewed-by: Lance Yang <ioworker0@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For now we only get the (small) zeropage mapped to user space in four
cases (excluding VM_PFNMAP mappings, such as /proc/vmstat):
(1) Read page faults in anonymous VMAs (MAP_PRIVATE|MAP_ANON):
do_anonymous_page() will not refcount it and map it pte_mkspecial()
(2) UFFDIO_ZEROPAGE on anonymous VMA or COW mapping of shmem
(MAP_PRIVATE). mfill_atomic_pte_zeropage() will not refcount it and
map it pte_mkspecial().
(3) KSM in mergeable VMA (anonymous VMA or COW mapping).
cmp_and_merge_page() will not refcount it and map it
pte_mkspecial().
(4) FSDAX as an optimization for holes.
vmf_insert_mixed()->__vm_insert_mixed() might end up calling
insert_page() without CONFIG_ARCH_HAS_PTE_SPECIAL, refcounting the
zeropage and not mapping it pte_mkspecial(). With
CONFIG_ARCH_HAS_PTE_SPECIAL, we'll call insert_pfn() where we will
not refcount it and map it pte_mkspecial().
In case (4), we might not have VM_MIXEDMAP set: while fs/fuse/dax.c sets
VM_MIXEDMAP, we removed it for ext4 fsdax in commit e1fb4a0864 ("dax:
remove VM_MIXEDMAP for fsdax and device dax") and for XFS in commit
e1fb4a0864 ("dax: remove VM_MIXEDMAP for fsdax and device dax").
Without CONFIG_ARCH_HAS_PTE_SPECIAL and with VM_MIXEDMAP, vm_normal_page()
would currently return the zeropage. We'll refcount the zeropage when
mapping and when unmapping.
Without CONFIG_ARCH_HAS_PTE_SPECIAL and without VM_MIXEDMAP,
vm_normal_page() would currently refuse to return the zeropage. So we'd
refcount it when mapping but not when unmapping it ... do we have fsdax
without CONFIG_ARCH_HAS_PTE_SPECIAL in practice? Hard to tell.
Independent of that, we should never refcount the zeropage when we might
be holding that reference for a long time, because even without an
accounting imbalance we might overflow the refcount. As there is interest
in using the zeropage also in other VM_MIXEDMAP mappings, let's add clean
support for that in the cases where it makes sense:
(A) Never refcount the zeropage when mapping it:
In insert_page(), special-case the zeropage, do not refcount it, and use
pte_mkspecial(). Don't involve insert_pfn(), adjusting insert_page()
looks cleaner than branching off to insert_pfn().
(B) Never refcount the zeropage when unmapping it:
In vm_normal_page(), also don't return the zeropage in a VM_MIXEDMAP
mapping without CONFIG_ARCH_HAS_PTE_SPECIAL. Add a VM_WARN_ON_ONCE()
sanity check if we'd ever return the zeropage, which could happen if
someone forgets to set pte_mkspecial() when mapping the zeropage.
Document that.
(C) Allow the zeropage only where reasonable
s390x never wants the zeropage in some processes running legacy KVM guests
that make use of storage keys. So disallow that.
Further, using the zeropage in COW mappings is unproblematic (just what we
do for other COW mappings), because FAULT_FLAG_UNSHARE can just unshare it
and GUP with FOLL_LONGTERM would work as expected.
Similarly, mappings that can never have writable PTEs (implying no write
faults) are also not problematic, because nothing could end up mapping the
PTE writable by mistake later. But in case we could have writable PTEs,
we'll only allow the zeropage in FSDAX VMAs, that are incompatible with
GUP and are blocked there completely.
We'll always require the zeropage to be mapped with pte_special().
GUP-fast will reject the zeropage that way, but GUP-slow will allow it.
(Note that GUP does not refcount the zeropage with FOLL_PIN, because there
were issues with overflowing the refcount in the past).
Add sanity checks to can_change_pte_writable() and wp_page_reuse(), to
catch early during testing if we'd ever find a zeropage unexpectedly in
code that wants to upgrade write permissions.
Convert the BUG_ON in vm_mixed_ok() to an ordinary check and simply fail
with VM_FAULT_SIGBUS, like we do for other sanity checks. Drop the stale
comment regarding reserved pages from insert_page().
Note that:
* we won't mess with VM_PFNMAP mappings for now. remap_pfn_range() and
vmf_insert_pfn() would allow the zeropage in some cases and
not refcount it.
* vmf_insert_pfn*() will reject the zeropage in VM_MIXEDMAP
mappings and we'll leave that alone for now. People can simply use
one of the other interfaces.
* we won't bother with the huge zeropage for now. It's never
PTE-mapped and also GUP does not special-case it yet.
Link: https://lkml.kernel.org/r/20240522125713.775114-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/memory: cleanly support zeropage in vm_insert_page*(),
vm_map_pages*() and vmf_insert_mixed()", v2.
There is interest in mapping zeropages via vm_insert_pages() [1] into
MAP_SHARED mappings.
For now, we only get zeropages in MAP_SHARED mappings via
vmf_insert_mixed() from FSDAX code, and I think it's a bit shaky in some
cases because we refcount the zeropage when mapping it but not necessarily
always when unmapping it ... and we should actually never refcount it.
It's all a bit tricky, especially how zeropages in MAP_SHARED mappings
interact with GUP (FOLL_LONGTERM), mprotect(), write-faults and s390x
forbidding the shared zeropage (rewrite [2] s now upstream).
This series tries to take the careful approach of only allowing the
zeropage where it is likely safe to use (which should cover the existing
FSDAX use case and [1]), preventing that it could accidentally get mapped
writable during a write fault, mprotect() etc, and preventing issues with
FOLL_LONGTERM in the future with other users.
Tested with a patch from Vincent that uses the zeropage in context of
[1].
[1] https://lkml.kernel.org/r/20240430111354.637356-1-vdonnefort@google.com
[2] https://lkml.kernel.org/r/20240411161441.910170-1-david@redhat.com
This patch (of 3):
We'll now also cover the case where insert_page() is called from
__vm_insert_mixed(), which sounds like the right thing to do.
Link: https://lkml.kernel.org/r/20240522125713.775114-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently we use one swap_address_space for every 64M chunk to reduce lock
contention, this is like having a set of smaller swap files inside one
swap device. But when doing swap cache look up or insert, we are still
using the offset of the whole large swap device. This is OK for
correctness, as the offset (key) is unique.
But Xarray is specially optimized for small indexes, it creates the radix
tree levels lazily to be just enough to fit the largest key stored in one
Xarray. So we are wasting tree nodes unnecessarily.
For 64M chunk it should only take at most 3 levels to contain everything.
But if we are using the offset from the whole swap device, the offset
(key) value will be way beyond 64M, and so will the tree level.
Optimize this by using a new helper swap_cache_index to get a swap entry's
unique offset in its own 64M swap_address_space.
I see a ~1% performance gain in benchmark and actual workload with high
memory pressure.
Test with `time memhog 128G` inside a 8G memcg using 128G swap (ramdisk
with SWP_SYNCHRONOUS_IO dropped, tested 3 times, results are stable. The
test result is similar but the improvement is smaller if
SWP_SYNCHRONOUS_IO is enabled, as swap out path can never skip swap
cache):
Before:
6.07user 250.74system 4:17.26elapsed 99%CPU (0avgtext+0avgdata 8373376maxresident)k
0inputs+0outputs (55major+33555018minor)pagefaults 0swaps
After (1.8% faster):
6.08user 246.09system 4:12.58elapsed 99%CPU (0avgtext+0avgdata 8373248maxresident)k
0inputs+0outputs (54major+33555027minor)pagefaults 0swaps
Similar result with MySQL and sysbench using swap:
Before:
94055.61 qps
After (0.8% faster):
94834.91 qps
Radix tree slab usage is also very slightly lower.
Link: https://lkml.kernel.org/r/20240521175854.96038-12-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are two helpers for retrieving the index within address space for
mixed usage of swap cache and page cache:
- page_index
- folio_index
This commit drops page_index, as we have eliminated all users, and
converts folio_index's helper __page_file_index to use folio to avoid the
page conversion.
Link: https://lkml.kernel.org/r/20240521175854.96038-11-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
folio_file_pos and page_file_offset are for mixed usage of swap cache and
page cache, it can't be page cache here, so introduce a new helper to get
the swap offset in swap device directly.
Need to include swapops.h in mm/swap.h to ensure swp_offset is always
defined before use.
Link: https://lkml.kernel.org/r/20240521175854.96038-9-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Factor out wb_dirty_freerun to remove more repeated freerun code.
Link: https://lkml.kernel.org/r/20240514125254.142203-6-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Factor out code of freerun into new helper functions domain_poll_intv and
domain_dirty_freerun to remove repeated code.
Link: https://lkml.kernel.org/r/20240514125254.142203-5-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Factor out domain_over_bg_thresh from wb_over_bg_thresh to remove repeated
code.
Link: https://lkml.kernel.org/r/20240514125254.142203-4-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add general function domain_dirty_avail to calculate dirty and avail for
either dirty limit or background writeback in either global domain or wb
domain.
Link: https://lkml.kernel.org/r/20240514125254.142203-3-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Add helper functions to remove repeated code and improve
readability of cgroup writeback", v2.
This series adds a lot of helpers to remove repeated code between domain
and wb; dirty limit and dirty background; global domain and wb domain.
The helpers also improve readability. More details can be found in the
respective patches.
A simple domain hierarchy is tested:
global domain (> 20G)
|
cgroup domain1(10G)
|
wb1
|
fio
Test steps:
/* make it easy to observe */
echo 300000 > /proc/sys/vm/dirty_expire_centisecs
echo 3000 > /proc/sys/vm/dirty_writeback_centisecs
/* create cgroup domain */
cd /sys/fs/cgroup
echo "+memory +io" > cgroup.subtree_control
mkdir group1
cd group1
echo 10G > memory.high
echo 10G > memory.max
echo $$ > cgroup.procs
mkfs.ext4 -F /dev/vdb
mount /dev/vdb /bdi1/
/* run fio to generate dirty pages */
fio -name test -filename=/bdi1/file -size=xxx -ioengine=libaio -bs=4K \
-iodepth=1 -rw=write -direct=0 --time_based -runtime=600 -invalidate=0
When fio size is 1G, the wb is in freerun state and dirty pages are only
written back when dirty inode is expired after 30 seconds. When fio size
is 2G, the dirty pages keep being written back and bandwidth of fio is
limited.
This patch (of 8):
Similar to wb_dirty_limits which calculates dirty and thresh of wb,
wb_bg_dirty_limits calculates background dirty and background thresh of
wb. With wb_bg_dirty_limits, we could remove repeated code in
wb_over_bg_thresh.
Link: https://lkml.kernel.org/r/20240514125254.142203-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20240514125254.142203-2-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The commit 6be5e186fd65 ("mm: vmscan: restore incremental cgroup
iteration") added a retry reclaim heuristic to iterate all the cgroups
before returning an unsuccessful reclaim but missed to reset the
sc->priority. Let's fix it.
Link: https://lkml.kernel.org/r/20240529154911.3008025-1-shakeel.butt@linux.dev
Fixes: 6be5e186fd65 ("mm: vmscan: restore incremental cgroup iteration")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reported-by: syzbot+17416257cb95200cba44@syzkaller.appspotmail.com
Tested-by: syzbot+17416257cb95200cba44@syzkaller.appspotmail.com
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, reclaim always walks the entire cgroup tree in order to ensure
fairness between groups. While overreclaim is limited in shrink_lruvec(),
many of our systems have a sizable number of active groups, and an even
bigger number of idle cgroups with cache left behind by previous jobs; the
mere act of walking all these cgroups can impose significant latency on
direct reclaimers.
In the past, we've used a save-and-restore iterator that enabled
incremental tree walks over multiple reclaim invocations. This ensured
fairness, while keeping the work of individual reclaimers small.
However, in edge cases with a lot of reclaim concurrency, individual
reclaimers would sometimes not see enough of the cgroup tree to make
forward progress and (prematurely) declare OOM. Consequently we switched
to comprehensive walks in 1ba6fc9af3 ("mm: vmscan: do not share cgroup
iteration between reclaimers").
To address the latency problem without bringing back the premature OOM
issue, reinstate the shared iteration, but with a restart condition to do
the full walk in the OOM case - similar to what we do for memory.low
enforcement and active page protection.
In the worst case, we do one more full tree walk before declaring
OOM. But the vast majority of direct reclaim scans can then finish
much quicker, while fairness across the tree is maintained:
- Before this patch, we observed that direct reclaim always takes more
than 100us and most direct reclaim time is spent in reclaim cycles
lasting between 1ms and 1 second. Almost 40% of direct reclaim time
was spent on reclaim cycles exceeding 100ms.
- With this patch, almost all page reclaim cycles last less than 10ms,
and a good amount of direct page reclaim finishes in under 100us. No
page reclaim cycles lasting over 100ms were observed anymore.
The shared iterator state is maintaned inside the target cgroup, so
fair and incremental walks are performed during both global reclaim
and cgroup limit reclaim of complex subtrees.
Link: https://lkml.kernel.org/r/20240514202641.2821494-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Rik van Riel <riel@surriel.com>
Reported-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Facebook Kernel Team <kernel-team@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's change shmem_alloc_folio() to take a order and use
folio_alloc_mpol() helper, then directly use it for normal or large folio
to cleanup code.
Link: https://lkml.kernel.org/r/20240515070709.78529-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert to use folio_alloc_mpol() to make vma_alloc_folio_noprof() to use
folio throughout.
Link: https://lkml.kernel.org/r/20240515070709.78529-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert to use folio_alloc_mpol_noprof() to make vma_alloc_folio_noprof()
to use folio throughout.
Link: https://lkml.kernel.org/r/20240515070709.78529-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit d67e32f267 ("hugetlb: restructure pool allocations"), the
parameter node_alloc_noretry from alloc_fresh_hugetlb_folio() is not used,
so drop it.
Link: https://lkml.kernel.org/r/20240516081035.5651-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 49fd9b6df5 ("mm/vmscan: fix a lot of comments") renamed
shrink_page_list() to shrink_folio_list(). Fix up the remaining
references to the old name in comments and documentation.
Link: https://lkml.kernel.org/r/20240517091348.1185566-1-illia@yshyn.com
Signed-off-by: Illia Ostapyshyn <illia@yshyn.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The sysctl core is preparing to only expose instances of struct ctl_table
as "const". This will also affect the ctl_table argument of sysctl
handlers.
As the function prototype of all sysctl handlers throughout the tree
needs to stay consistent that change will be done in one commit.
To reduce the size of that final commit, switch utility functions which
are not bound by "typedef proc_handler" to "const struct ctl_table".
No functional change.
Link: https://lkml.kernel.org/r/20240518-sysctl-const-handler-hugetlb-v1-1-47e34e2871b2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The dirty throttling logic is interspersed with assumptions that dirty
limits in PAGE_SIZE units fit into 32-bit (so that various multiplications
fit into 64-bits). If limits end up being larger, we will hit overflows,
possible divisions by 0 etc. Fix these problems by never allowing so
large dirty limits as they have dubious practical value anyway. For
dirty_bytes / dirty_background_bytes interfaces we can just refuse to set
so large limits. For dirty_ratio / dirty_background_ratio it isn't so
simple as the dirty limit is computed from the amount of available memory
which can change due to memory hotplug etc. So when converting dirty
limits from ratios to numbers of pages, we just don't allow the result to
exceed UINT_MAX.
This is root-only triggerable problem which occurs when the operator
sets dirty limits to >16 TB.
Link: https://lkml.kernel.org/r/20240621144246.11148-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-By: Zach O'Keefe <zokeefe@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: Avoid possible overflows in dirty throttling".
Dirty throttling logic assumes dirty limits in page units fit into
32-bits. This patch series makes sure this is true (see patch 2/2 for
more details).
This patch (of 2):
This reverts commit 9319b64790.
The commit is broken in several ways. Firstly, the removed (u64) cast
from the multiplication will introduce a multiplication overflow on 32-bit
archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the
default settings with 4GB of RAM will trigger this). Secondly, the
div64_u64() is unnecessarily expensive on 32-bit archs. We have
div64_ul() in case we want to be safe & cheap. Thirdly, if dirty
thresholds are larger than 1<<32 pages, then dirty balancing is going to
blow up in many other spectacular ways anyway so trying to fix one
possible overflow is just moot.
Link: https://lkml.kernel.org/r/20240621144017.30993-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20240621144246.11148-1-jack@suse.cz
Fixes: 9319b64790 ("mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-By: Zach O'Keefe <zokeefe@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dedicated caches are available for fixed size allocations via
kmem_cache_alloc(), but for dynamically sized allocations there is only
the global kmalloc API's set of buckets available. This means it isn't
possible to separate specific sets of dynamically sized allocations into
a separate collection of caches.
This leads to a use-after-free exploitation weakness in the Linux
kernel since many heap memory spraying/grooming attacks depend on using
userspace-controllable dynamically sized allocations to collide with
fixed size allocations that end up in same cache.
While CONFIG_RANDOM_KMALLOC_CACHES provides a probabilistic defense
against these kinds of "type confusion" attacks, including for fixed
same-size heap objects, we can create a complementary deterministic
defense for dynamically sized allocations that are directly user
controlled. Addressing these cases is limited in scope, so isolating these
kinds of interfaces will not become an unbounded game of whack-a-mole. For
example, many pass through memdup_user(), making isolation there very
effective.
In order to isolate user-controllable dynamically-sized
allocations from the common system kmalloc allocations, introduce
kmem_buckets_create(), which behaves like kmem_cache_create(). Introduce
kmem_buckets_alloc(), which behaves like kmem_cache_alloc(). Introduce
kmem_buckets_alloc_track_caller() for where caller tracking is
needed. Introduce kmem_buckets_valloc() for cases where vmalloc fallback
is needed. Note that these caches are specifically flagged with
SLAB_NO_MERGE, since merging would defeat the entire purpose of the
mitigation.
This can also be used in the future to extend allocation profiling's use
of code tagging to implement per-caller allocation cache isolation[1]
even for dynamic allocations.
Memory allocation pinning[2] is still needed to plug the Use-After-Free
cross-allocator weakness (where attackers can arrange to free an
entire slab page and have it reallocated to a different cache),
but that is an existing and separate issue which is complementary
to this improvement. Development continues for that feature via the
SLAB_VIRTUAL[3] series (which could also provide guard pages -- another
complementary improvement).
Link: https://lore.kernel.org/lkml/202402211449.401382D2AF@keescook [1]
Link: https://googleprojectzero.blogspot.com/2021/10/how-simple-linux-kernel-memory.html [2]
Link: https://lore.kernel.org/lkml/20230915105933.495735-1-matteorizzo@google.com/ [3]
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Plumb kmem_buckets arguments through kvmalloc_node_noprof() so it is
possible to provide an API to perform kvmalloc-style allocations with
a particular set of buckets. Introduce kvmalloc_buckets_node() that takes a
kmem_buckets argument.
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Introduce CONFIG_SLAB_BUCKETS which provides the infrastructure to
support separated kmalloc buckets (in the following kmem_buckets_create()
patches and future codetag-based separation). Since this will provide
a mitigation for a very common case of exploits, it is recommended to
enable this feature for general purpose distros. By default, the new
Kconfig will be enabled if CONFIG_SLAB_FREELIST_HARDENED is enabled (and
it is added to the hardening.config Kconfig fragment).
To be able to choose which buckets to allocate from, make the buckets
available to the internal kmalloc interfaces by adding them as the
second argument, rather than depending on the buckets being chosen from
the fixed set of global buckets. Where the bucket is not available,
pass NULL, which means "use the default system kmalloc bucket set"
(the prior existing behavior), as implemented in kmalloc_slab().
To avoid adding the extra argument when !CONFIG_SLAB_BUCKETS, only the
top-level macros and static inlines use the buckets argument (where
they are stripped out and compiled out respectively). The actual extern
functions can then be built without the argument, and the internals
fall back to the global kmalloc buckets unconditionally.
Co-developed-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Encapsulate the concept of a single set of kmem_caches that are used
for the kmalloc size buckets. Redefine kmalloc_caches as an array
of these buckets (for the different global cache buckets).
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Slab allocators have been guaranteeing natural alignment for
power-of-two sizes since commit 59bb47985c ("mm, sl[aou]b: guarantee
natural alignment for kmalloc(power-of-two)"), while any other sizes are
guaranteed to be aligned only to ARCH_KMALLOC_MINALIGN bytes (although
in practice are aligned more than that in non-debug scenarios).
Rust's allocator API specifies size and alignment per allocation, which
have to satisfy the following rules, per Alice Ryhl [1]:
1. The alignment is a power of two.
2. The size is non-zero.
3. When you round up the size to the next multiple of the alignment,
then it must not overflow the signed type isize / ssize_t.
In order to map this to kmalloc()'s guarantees, some requested
allocation sizes have to be padded to the next power-of-two size [2].
For example, an allocation of size 96 and alignment of 32 will be padded
to an allocation of size 128, because the existing kmalloc-96 bucket
doesn't guarantee alignent above ARCH_KMALLOC_MINALIGN. Without slab
debugging active, the layout of the kmalloc-96 slabs however naturally
align the objects to 32 bytes, so extending the size to 128 bytes is
wasteful.
To improve the situation we can extend the kmalloc() alignment
guarantees in a way that
1) doesn't change the current slab layout (and thus does not increase
internal fragmentation) when slab debugging is not active
2) reduces waste in the Rust allocator use case
3) is a superset of the current guarantee for power-of-two sizes.
The extended guarantee is that alignment is at least the largest
power-of-two divisor of the requested size. For power-of-two sizes the
largest divisor is the size itself, but let's keep this case documented
separately for clarity.
For current kmalloc size buckets, it means kmalloc-96 will guarantee
alignment of 32 bytes and kmalloc-196 will guarantee 64 bytes.
This covers the rules 1 and 2 above of Rust's API as long as the size is
a multiple of the alignment. The Rust layer should now only need to
round up the size to the next multiple if it isn't, while enforcing the
rule 3.
Implementation-wise, this changes the alignment calculation in
create_boot_cache(). While at it also do the calulation only for caches
with the SLAB_KMALLOC flag, because the function is also used to create
the initial kmem_cache and kmem_cache_node caches, where no alignment
guarantee is necessary.
In the Rust allocator's krealloc_aligned(), remove the code that padded
sizes to the next power of two (suggested by Alice Ryhl) as it's no
longer necessary with the new guarantees.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/all/CAH5fLggjrbdUuT-H-5vbQfMazjRDpp2%2Bk3%3DYhPyS17ezEqxwcw@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAH5fLghsZRemYUwVvhk77o6y1foqnCeDzW4WZv6ScEWna2+_jw@mail.gmail.com/ [2]
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Since arch_pick_mmap_layout() is an inline for non-MMU systems, disable
this test there.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406160505.uBge6TMY-lkp@intel.com/
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
opening for write performs:
if (f->f_mode & FMODE_WRITE) {
[snip]
smp_mb();
if (filemap_nr_thps(inode->i_mapping)) {
[snip]
}
}
filemap_nr_thps on kernels built without CONFIG_READ_ONLY_THP_FOR
expands to 0, allowing the compiler to eliminate the entire thing, with
exception of the fence (and the branch leading there).
So happens required synchronisation between i_writecount and nr_thps
changes is already provided by the full fence coming from
get_write_access -> atomic_inc_unless_negative, thus the smp_mb instance
above can be removed regardless of CONFIG_READ_ONLY_THP_FOR.
While I updated commentary in places claiming to match the now-removed
fence, I did not try to patch them to act on the compile option.
I did not bother benchmarking it, not issuing a spurious full fence in
the fast path does not warrant justification from perf standpoint.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240624085402.493630-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
The requirement that the head page be passed to do_set_pmd() was added in
commit ef37b2ea08 ("mm/memory: page_add_file_rmap() ->
folio_add_file_rmap_[pte|pmd]()") and prevents pmd-mapping in the
finish_fault() and filemap_map_pages() paths if the page to be inserted is
anything but the head page for an otherwise suitable vma and pmd-sized
page.
Matthew said:
: We're going to stop using PMDs to map large folios unless the fault is
: within the first 4KiB of the PMD. No idea how many workloads that
: affects, but it only needs to be backported as far as v6.8, so we may
: as well backport it.
Link: https://lkml.kernel.org/r/20240611153216.2794513-1-abrestic@rivosinc.com
Fixes: ef37b2ea08 ("mm/memory: page_add_file_rmap() -> folio_add_file_rmap_[pte|pmd]()")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit 5d0a661d80 ("mm/page_alloc: use only one PCP list for
THP-sized allocations") no longer differentiates the migration type of
pages in THP-sized PCP list, it's possible that non-movable allocation
requests may get a CMA page from the list, in some cases, it's not
acceptable.
If a large number of CMA memory are configured in system (for example, the
CMA memory accounts for 50% of the system memory), starting a virtual
machine with device passthrough will get stuck. During starting the
virtual machine, it will call pin_user_pages_remote(..., FOLL_LONGTERM,
...) to pin memory. Normally if a page is present and in CMA area,
pin_user_pages_remote() will migrate the page from CMA area to non-CMA
area because of FOLL_LONGTERM flag. But if non-movable allocation
requests return CMA memory, migrate_longterm_unpinnable_pages() will
migrate a CMA page to another CMA page, which will fail to pass the check
in check_and_migrate_movable_pages() and cause migration endless.
Call trace:
pin_user_pages_remote
--__gup_longterm_locked // endless loops in this function
----_get_user_pages_locked
----check_and_migrate_movable_pages
------migrate_longterm_unpinnable_pages
--------alloc_migration_target
This problem will also have a negative impact on CMA itself. For example,
when CMA is borrowed by THP, and we need to reclaim it through cma_alloc()
or dma_alloc_coherent(), we must move those pages out to ensure CMA's
users can retrieve that contigous memory. Currently, CMA's memory is
occupied by non-movable pages, meaning we can't relocate them. As a
result, cma_alloc() is more likely to fail.
To fix the problem above, we add one PCP list for THP, which will not
introduce a new cacheline for struct per_cpu_pages. THP will have 2 PCP
lists, one PCP list is used by MOVABLE allocation, and the other PCP list
is used by UNMOVABLE allocation. MOVABLE allocation contains GPF_MOVABLE,
and UNMOVABLE allocation contains GFP_UNMOVABLE and GFP_RECLAIMABLE.
Link: https://lkml.kernel.org/r/1718845190-4456-1-git-send-email-yangge1116@126.com
Fixes: 5d0a661d80 ("mm/page_alloc: use only one PCP list for THP-sized allocations")
Signed-off-by: yangge <yangge1116@126.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As Ying pointed out in [1], stats->nr_thp_failed needs to be updated to
avoid stats inconsistency between MIGRATE_SYNC and MIGRATE_ASYNC when
calling migrate_pages_batch().
Because if not, when migrate_pages_batch() is called via
migrate_pages(MIGRATE_ASYNC), nr_thp_failed will not be increased and when
migrate_pages_batch() is called via migrate_pages(MIGRATE_SYNC*),
nr_thp_failed will be increase in migrate_pages_sync() by
stats->nr_thp_failed += astats.nr_thp_split.
[1] https://lore.kernel.org/linux-mm/87msnq7key.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lkml.kernel.org/r/20240620012712.19804-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20240618134151.29214-1-zi.yan@sent.com
Fixes: 7262f208ca ("mm/migrate: split source folio if it is on deferred split list")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 29d7355a9d ("kasan: save alloc stack traces for mempool") messed
up one of the calls to unpoison_slab_object: the last two arguments are
supposed to be GFP flags and whether to init the object memory.
Fix the call.
Without this fix, __kasan_mempool_unpoison_object provides the object's
size as GFP flags to unpoison_slab_object, which can cause LOCKDEP reports
(and probably other issues).
Link: https://lkml.kernel.org/r/20240614143238.60323-1-andrey.konovalov@linux.dev
Fixes: 29d7355a9d ("kasan: save alloc stack traces for mempool")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: Brad Spengler <spender@grsecurity.net>
Acked-by: Marco Elver <elver@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During compaction isolated free pages are marked allocated so that they
can be split and/or freed. For that, post_alloc_hook() is used inside
split_map_pages() and release_free_list(). split_map_pages() marks free
pages allocated, splits the pages and then lets
alloc_contig_range_noprof() free those pages. release_free_list() marks
free pages and immediately frees them. This usage of post_alloc_hook()
affect memory allocation profiling because these functions might not be
called from an instrumented allocator, therefore current->alloc_tag is
NULL and when debugging is enabled (CONFIG_MEM_ALLOC_PROFILING_DEBUG=y)
that causes warnings. To avoid that, wrap such post_alloc_hook() calls
into an instrumented function which acts as an allocator which will be
charged for these fake allocations. Note that these allocations are very
short lived until they are freed, therefore the associated counters should
usually read 0.
Link: https://lkml.kernel.org/r/20240614230504.3849136-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
