Currently there seems to be three page frag implementations
which all try to allocate order 3 page, if that fails, it
then fail back to allocate order 0 page, and each of them
all allow order 3 page allocation to fail under certain
condition by using specific gfp bits.
The gfp bits for order 3 page allocation are different
between different implementation, __GFP_NOMEMALLOC is
or'd to forbid access to emergency reserves memory for
__page_frag_cache_refill(), but it is not or'd in other
implementions, __GFP_DIRECT_RECLAIM is masked off to avoid
direct reclaim in vhost_net_page_frag_refill(), but it is
not masked off in __page_frag_cache_refill().
This patch unifies the gfp bits used between different
implementions by or'ing __GFP_NOMEMALLOC and masking off
__GFP_DIRECT_RECLAIM for order 3 page allocation to avoid
possible pressure for mm.
Leave the gfp unifying for page frag implementation in sock.c
for now as suggested by Paolo Abeni.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
napi_alloc_frag_align() and netdev_alloc_frag_align() accept
align as an argument, and they are thin wrappers around the
__napi_alloc_frag_align() and __netdev_alloc_frag_align() APIs
doing the alignment checking and align mask conversion, in order
to call page_frag_alloc_align() directly. The intention here is
to keep the alignment checking and the alignmask conversion in
in-line wrapper to avoid those kind of operations during execution
time since it can usually be handled during compile time.
We are going to use page_frag_alloc_align() in vhost_net.c, it
need the same kind of alignment checking and alignmask conversion,
so split up page_frag_alloc_align into an inline wrapper doing the
above operation, and add __page_frag_alloc_align() which is passed
with the align mask the original function expected as suggested by
Alexander.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The PARTIAL_NODE slab_state has gone with SLAB removed, so just
remove it.
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
We will save allocated tag in the object header to indicate that it's
allocated.
handle |= OBJ_ALLOCATED_TAG;
So the object header needs to reserve LSB for this tag bit.
But the handle itself doesn't need to reserve LSB to save tag, since it's
only used to find the position of object, by (pfn + obj_idx). So remove
LSB reserve from handle, one more bit can be used as obj_idx.
Link: https://lkml.kernel.org/r/20240228023854.3511239-1-chengming.zhou@linux.dev
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
do_numa_page() is reading from the same page table entry, twice, while
holding the page table lock: once while checking that the pte hasn't
changed, and again in order to modify the pte.
Instead, just read the pte once, and save it in the same old_pte variable
that already exists. This has no effect on behavior, other than to
provide a tiny potential improvement to performance, by avoiding the
redundant memory read (which the compiler cannot elide, due to
READ_ONCE()).
Also improve the associated comments nearby.
Link: https://lkml.kernel.org/r/20240228034151.459370-1-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alloc_contig_migrate_range has every information to be able to understand
big contiguous allocation latency. For example, how many pages are
migrated, how many times they were needed to unmap from page tables.
This patch adds the trace event to collect the allocation statistics. In
the field, it was quite useful to understand CMA allocation latency.
[akpm@linux-foundation.org: a/trace_mm_alloc_config_migrate_range_info_enabled/trace_mm_alloc_contig_migrate_range_info_enabled]
Link: https://lkml.kernel.org/r/20240228051127.2859472-1-richardycc@google.com
Signed-off-by: Richard Chang <richardycc@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org.
Cc: Martin Liu <liumartin@google.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We already have a folio; use it instead of the head page where reasonable.
Saves a couple of calls to compound_head() and elimimnates a few
references to page->mapping.
Link: https://lkml.kernel.org/r/20240228164326.1355045-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All but one caller already has a folio, so convert
free_page_and_swap_cache() to have a folio and remove the call to
page_folio().
Link: https://lkml.kernel.org/r/20240227174254.710559-19-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These pages are all chained together through the lru list, so we know
they're folios. Use the folio APIs to save three hidden calls to
compound_head().
Link: https://lkml.kernel.org/r/20240227174254.710559-18-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Process the pages in batch-sized quantities instead of all-at-once.
Link: https://lkml.kernel.org/r/20240227174254.710559-17-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All callers now use free_unref_folios() so we can delete this function.
Link: https://lkml.kernel.org/r/20240227174254.710559-15-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All users have been converted to mem_cgroup_uncharge_folios() so we can
remove this API.
Link: https://lkml.kernel.org/r/20240227174254.710559-14-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The few folios which can't be moved to the LRU list (because their
refcount dropped to zero) used to be returned to the caller to dispose of.
Make this simpler to call by freeing the folios directly through
free_unref_folios().
Link: https://lkml.kernel.org/r/20240227174254.710559-13-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use free_unref_page_batch() to free the folios. This may increase the
number of IPIs from calling try_to_unmap_flush() more often, but that's
going to be very workload-dependent. It may even reduce the number of
IPIs as we now batch-free large folios instead of freeing them one at a
time.
Link: https://lkml.kernel.org/r/20240227174254.710559-12-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hugetlb folios still get special treatment, but normal large folios can
now be freed by free_unref_folios(). This should have a reasonable
performance impact, TBD.
Link: https://lkml.kernel.org/r/20240227174254.710559-11-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Call folio_undo_large_rmappable() if needed. free_unref_page_prepare()
destroys the ability to call folio_order(), so stash the order in
folio->private for the benefit of the second loop.
Link: https://lkml.kernel.org/r/20240227174254.710559-10-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pass a pointer to the lruvec so we can take advantage of the
folio_lruvec_relock_irqsave(). Adjust the calling convention of
folio_lruvec_relock_irqsave() to suit and add a page_cache_release()
wrapper.
Link: https://lkml.kernel.org/r/20240227174254.710559-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Break up the list of folios into batches here so that the folios are more
likely to be cache hot when doing the rest of the processing.
Link: https://lkml.kernel.org/r/20240227174254.710559-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of putting the interesting folios on a list, delete the
uninteresting one from the folio_batch.
Link: https://lkml.kernel.org/r/20240227174254.710559-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Almost identical to mem_cgroup_uncharge_list(), except it takes a
folio_batch instead of a list_head.
Link: https://lkml.kernel.org/r/20240227174254.710559-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There's no need to indirect through release_pages() and iterate over this
batch of folios an extra time; we can just use the batch that we have.
Link: https://lkml.kernel.org/r/20240227174254.710559-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Iterate over a folio_batch rather than a linked list. This is easier for
the CPU to prefetch and has a batch count naturally built in so we don't
need to track it. Again, this lowers the maximum lock hold time from
32 folios to 15, but I do not expect this to have a significant effect.
Link: https://lkml.kernel.org/r/20240227174254.710559-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Most of its callees are not yet ready to accept a folio, but we know all
of the pages passed in are actually folios because they're linked through
->lru.
Link: https://lkml.kernel.org/r/20240227174254.710559-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Rearrange batched folio freeing", v3.
Other than the obvious "remove calls to compound_head" changes, the
fundamental belief here is that iterating a linked list is much slower
than iterating an array (5-15x slower in my testing). There's also an
associated belief that since we iterate the batch of folios three times,
we do better when the array is small (ie 15 entries) than we do with a
batch that is hundreds of entries long, which only gives us the
opportunity for the first pages to fall out of cache by the time we get to
the end.
It is possible we should increase the size of folio_batch. Hopefully the
bots let us know if this introduces any performance regressions.
This patch (of 3):
By making release_pages() call folios_put(), we can get rid of the calls
to compound_head() for the callers that already know they have folios. We
can also get rid of the lock_batch tracking as we know the size of the
batch is limited by folio_batch. This does reduce the maximum number of
pages for which the lruvec lock is held, from SWAP_CLUSTER_MAX (32) to
PAGEVEC_SIZE (15). I do not expect this to make a significant difference,
but if it does, we can increase PAGEVEC_SIZE to 31.
Link: https://lkml.kernel.org/r/20240227174254.710559-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20240227174254.710559-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, we removed the mm from mm_slot and dropped mm_count
if the MMF_THP_DISABLE flag was set. However, we didn't re-add
the mm back after clearing the MMF_THP_DISABLE flag. Additionally,
We add a check for the MMF_THP_DISABLE flag in hugepage_vma_revalidate().
Link: https://lkml.kernel.org/r/20240227035135.54593-1-ioworker0@gmail.com
Fixes: 879c6000e1 ("mm/khugepaged: bypassing unnecessary scans with MMF_DISABLE_THP check")
Signed-off-by: Lance Yang <ioworker0@gmail.com>
Suggested-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: remove total_mapcount()", v2.
Let's remove the remaining user from mm/memfd.c so we can get rid of
total_mapcount().
This patch (of 2):
Both functions are the remaining users of total_mapcount(). Let's get rid
of the calls by converting the code to folios.
As it turns out, the code is unnecessarily complicated, especially:
1) We can query the number of pagecache references for a folio simply via
folio_nr_pages(). This will handle other folio sizes in the future
correctly.
2) The xas_set(xas, page->index + cache_count) call to increment the
iterator for large folios is not required. Remove it.
Further, simplify the XA_CHECK_SCHED check, counting each entry exactly
once.
Memfd pages can be swapped out when using shmem; leave xa_is_value()
checks in place.
Link: https://lkml.kernel.org/r/20240226141324.278526-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240226141324.278526-2-david@redhat.com
Co-developed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is used to test split_huge_page_to_list_to_order for pagecache THPs.
Also add test cases for split_huge_page_to_list_to_order via both debugfs.
[ziy@nvidia.com: fix issue discovered with NFS]
Link: https://lkml.kernel.org/r/262E4DAA-4A78-4328-B745-1355AE356A07@nvidia.com
Link: https://lkml.kernel.org/r/20240226205534.1603748-9-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Tested-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To split a THP to any lower order pages, we need to reform THPs on
subpages at given order and add page refcount based on the new page order.
Also we need to reinitialize page_deferred_list after removing the page
from the split_queue, otherwise a subsequent split will see list
corruption when checking the page_deferred_list again.
Note: Anonymous order-1 folio is not supported because _deferred_list,
which is used by partially mapped folios, is stored in subpage 2 and an
order-1 folio only has subpage 0 and 1. File-backed order-1 folios are
fine, since they do not use _deferred_list.
[ziy@nvidia.com: fixup per discussion with Ryan]
Link: https://lkml.kernel.org/r/494F48CD-1F0F-4CAD-884E-6D48F40AF990@nvidia.com
Link: https://lkml.kernel.org/r/20240226205534.1603748-8-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It adds a new_order parameter to set new page order in page owner. It
prepares for upcoming changes to support split huge page to any lower
order.
Link: https://lkml.kernel.org/r/20240226205534.1603748-7-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It sets memcg information for the pages after the split. A new parameter
new_order is added to tell the order of subpages in the new page, always 0
for now. It prepares for upcoming changes to support split huge page to
any lower order.
Link: https://lkml.kernel.org/r/20240226205534.1603748-6-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We do not have non power of two pages, using nr is error prone if nr is
not power-of-two. Use page order instead.
Link: https://lkml.kernel.org/r/20240226205534.1603748-5-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We do not have non power of two pages, using nr is error prone if nr is
not power-of-two. Use page order instead.
Link: https://lkml.kernel.org/r/20240226205534.1603748-4-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Folios of order 1 have no space to store the deferred list. This is not a
problem for the page cache as file-backed folios are never placed on the
deferred list. All we need to do is prevent the core MM from touching the
deferred list for order 1 folios and remove the code which prevented us
from allocating order 1 folios.
Link: https://lore.kernel.org/linux-mm/90344ea7-4eec-47ee-5996-0c22f42d6a6a@google.com/
Link: https://lkml.kernel.org/r/20240226205534.1603748-3-zi.yan@sent.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Split a folio to any lower order folios", v5.
File folio supports any order and multi-size THP is upstreamed[1], so both
file and anonymous folios can be >0 order. Currently, split_huge_page()
only splits a huge page to order-0 pages, but splitting to orders higher
than 0 might better utilize large folios, if done properly. In addition,
Large Block Sizes in XFS support would benefit from it during truncate[2].
This patchset adds support for splitting a large folio to any lower order
folios.
In addition to this implementation of split_huge_page_to_list_to_order(),
a possible optimization could be splitting a large folio to arbitrary
smaller folios instead of a single order. As both Hugh and Ryan pointed
out [3,5] that split to a single order might not be optimal, an order-9
folio might be better split into 1 order-8, 1 order-7, ..., 1 order-1, and
2 order-0 folios, depending on subsequent folio operations. Leave this as
future work.
[1] https://lore.kernel.org/all/20231207161211.2374093-1-ryan.roberts@arm.com/
[2] https://lore.kernel.org/linux-mm/20240226094936.2677493-1-kernel@pankajraghav.com/
[3] https://lore.kernel.org/linux-mm/9dd96da-efa2-5123-20d4-4992136ef3ad@google.com/
[4] https://lore.kernel.org/linux-mm/cbb1d6a0-66dd-47d0-8733-f836fe050374@arm.com/
[5] https://lore.kernel.org/linux-mm/20240213215520.1048625-1-zi.yan@sent.com/
This patch (of 8):
As multi-size THP support is added, not all THPs are PMD-mapped, thus
during a huge page split, there is no need to always split PMD mapping in
unmap_folio(). Make it conditional.
Link: https://lkml.kernel.org/r/20240226205534.1603748-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20240226205534.1603748-2-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Koutny <mkoutny@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While doing MADV_PAGEOUT, the current code will clear PTE young so that
vmscan won't read young flags to allow the reclamation of madvised folios
to go ahead. It seems we can do it by directly ignoring references, thus
we can remove tlb flush in madvise and rmap overhead in vmscan.
Regarding the side effect, in the original code, if a parallel thread runs
side by side to access the madvised memory with the thread doing madvise,
folios will get a chance to be re-activated by vmscan (though the time gap
is actually quite small since checking PTEs is done immediately after
clearing PTEs young). But with this patch, they will still be reclaimed.
But this behaviour doing PAGEOUT and doing access at the same time is
quite silly like DoS. So probably, we don't need to care. Or ignoring
the new access during the quite small time gap is even better.
For DAMON's DAMOS_PAGEOUT based on physical address region, we still keep
its behaviour as is since a physical address might be mapped by multiple
processes. MADV_PAGEOUT based on virtual address is actually much more
aggressive on reclamation. To untouch paddr's DAMOS_PAGEOUT, we simply
pass ignore_references as false in reclaim_pages().
A microbench as below has shown 6% decrement on the latency of
MADV_PAGEOUT,
#define PGSIZE 4096
main()
{
int i;
#define SIZE 512*1024*1024
volatile long *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
for (i = 0; i < SIZE/sizeof(long); i += PGSIZE / sizeof(long))
p[i] = 0x11;
madvise(p, SIZE, MADV_PAGEOUT);
}
w/o patch w/ patch
root@10:~# time ./a.out root@10:~# time ./a.out
real 0m49.634s real 0m46.334s
user 0m0.637s user 0m0.648s
sys 0m47.434s sys 0m44.265s
Link: https://lkml.kernel.org/r/20240226005739.24350-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Address the additional feedback since 4e76c8cc33 kasan: add atomic tests
(""kasan: add atomic tests") by removing an explicit cast and fixing the
size as well as the check of the allocation of `a2`.
Link: https://lkml.kernel.org/r/20240224105414.211995-1-paul.heidekrueger@tum.de
Link: https://lore.kernel.org/all/20240131210041.686657-1-paul.heidekrueger@tum.de/T/#u
Fixes: 4e76c8cc33 ("kasan: add atomic tests")
Signed-off-by: Paul Heidekrüger <paul.heidekrueger@tum.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=214055
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current implementation of the mark_victim tracepoint provides only the
process ID (pid) of the victim process. This limitation poses challenges
for userspace tools requiring real-time OOM analysis and intervention.
Although this information is available from the kernel logs, it’s not
the appropriate format to provide OOM notifications. In Android, BPF
programs are used with the mark_victim trace events to notify userspace of
an OOM kill. For consistency, update the trace event to include the same
information about the OOMed victim as the kernel logs.
- UID
In Android each installed application has a unique UID. Including
the `uid` assists in correlating OOM events with specific apps.
- Process Name (comm)
Enables identification of the affected process.
- OOM Score
Will allow userspace to get additional insight of the relative kill
priority of the OOM victim. In Android, the oom_score_adj is used to
categorize app state (foreground, background, etc.), which aids in
analyzing user-perceptible impacts of OOM events [1].
- Total VM, RSS Stats, and pgtables
Amount of memory used by the victim that will, potentially, be freed up
by killing it.
[1] 246dc8fc95:frameworks/base/services/core/java/com/android/server/am/ProcessList.java;l=188-283
Signed-off-by: Carlos Galo <carlosgalo@google.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hugetlb can now safely handle faults under the VMA lock, so allow it to do
so.
This patch may cause ltp hugemmap10 to "fail". Hugemmap10 tests hugetlb
counters, and expects the counters to remain unchanged on failure to
handle a fault.
In hugetlb_no_page(), vmf_anon_prepare() may bailout with no anon_vma
under the VMA lock after allocating a folio for the hugepage. In
free_huge_folio(), this folio is completely freed on bailout iff there is
a surplus of hugetlb pages. This will remove a folio off the freelist and
decrement the number of hugepages while ltp expects these counters to
remain unchanged on failure.
Originally this could only happen due to OOM failures, but now it may also
occur after we allocate a hugetlb folio without a suitable anon_vma under
the VMA lock. This should only happen for the first freshly allocated
hugepage in this vma.
Link: https://lkml.kernel.org/r/20240221234732.187629-6-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
hugetlb_no_page() and hugetlb_wp() call anon_vma_prepare(). In
preparation for hugetlb to safely handle faults under the VMA lock, use
vmf_anon_prepare() here instead.
Additionally, passing hugetlb_wp() the vm_fault struct from
hugetlb_fault() works toward cleaning up the hugetlb code and function
stack.
Link: https://lkml.kernel.org/r/20240221234732.187629-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that hugetlb_fault() has a struct vm_fault, have
hugetlb_handle_userfault() use it instead of creating one of its own.
This lets us reduce the number of arguments passed to
hugetlb_handle_userfault() from 7 to 3, cleaning up the code and stack.
Link: https://lkml.kernel.org/r/20240221234732.187629-4-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
hugetlb_fault() currently defines a vm_fault to pass to the generic
handle_userfault() function. We can move this definition to the top of
hugetlb_fault() so that it can be used throughout the rest of the hugetlb
fault path.
This will help cleanup a number of excess variables and function arguments
throughout the stack. Also, since vm_fault already has space to store the
page offset, use that instead and get rid of idx.
Link: https://lkml.kernel.org/r/20240221234732.187629-3-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Handle hugetlb faults under the VMA lock", v2.
It is generally safe to handle hugetlb faults under the VMA lock. The
only time this is unsafe is when no anon_vma has been allocated to this
vma yet, so we can use vmf_anon_prepare() instead of anon_vma_prepare() to
bailout if necessary. This should only happen for the first hugetlb page
in the vma.
Additionally, this patchset begins to use struct vm_fault within
hugetlb_fault(). This works towards cleaning up hugetlb code, and should
significantly reduce the number of arguments passed to functions.
The last patch in this series may cause ltp hugemmap10 to "fail". This is
because vmf_anon_prepare() may bailout with no anon_vma under the VMA lock
after allocating a folio for the hugepage. In free_huge_folio(), this
folio is completely freed on bailout iff there is a surplus of hugetlb
pages. This will remove a folio off the freelist and decrement the number
of hugepages while ltp expects these counters to remain unchanged on
failure. The rest of the ltp testcases pass.
This patch (of 2):
In order to handle hugetlb faults under the VMA lock, hugetlb can use
vmf_anon_prepare() to ensure we can safely prepare an anon_vma. Change it
to be a non-static function so it can be used within hugetlb as well.
Link: https://lkml.kernel.org/r/20240221234732.187629-6-vishal.moola@gmail.com
Link: https://lkml.kernel.org/r/20240221234732.187629-2-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make check_new_page() return bool like check_new_pages()
Link: https://lkml.kernel.org/r/20240222091932.54799-1-gehao@kylinos.cn
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 44b414c871 ("mm/util.c: add warning if
__vm_enough_memory fails") adds debug information which gives the process
id and executable name should __vm_enough_memory() fail. Adding the
number of pages to the failure message would benefit application
developers and system administrators in debugging overambitious memory
requests by providing a point of reference to the amount of memory causing
__vm_enough_memory() to fail.
1. Set appropriate kernel tunable to reach code path for failure
message:
# echo 2 > /proc/sys/vm/overcommit_memory
2. Test program to generate failure - requests 1 gibibyte per
iteration:
#include <stdlib.h>
#include <stdio.h>
int main(int argc, char **argv) {
for(;;) {
if(malloc(1<<30) == NULL)
break;
printf("allocated 1 GiB\n");
}
return 0;
}
3. Output:
Before:
__vm_enough_memory: pid: 1218, comm: a.out, not enough memory
for the allocation
After:
__vm_enough_memory: pid: 1137, comm: a.out, bytes: 1073741824,
not enough memory for the allocation
Link: https://lkml.kernel.org/r/20240222194617.1255-1-mcassell411@gmail.com
Signed-off-by: Matthew Cassell <mcassell411@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All zswap entries will take a reference of zswap_pool when zswap_store(),
and drop it when free. Change it to use the percpu_ref is better for
scalability performance.
Although percpu_ref use a bit more memory which should be ok for our use
case, since we almost have only one zswap_pool to be using. The
performance gain is for zswap_store/load hotpath.
Testing kernel build (32 threads) in tmpfs with memory.max=2GB. (zswap
shrinker and writeback enabled with one 50GB swapfile, on a 128 CPUs
x86-64 machine, below is the average of 5 runs)
mm-unstable zswap-global-lru
real 63.20 63.12
user 1061.75 1062.95
sys 268.74 264.44
[chengming.zhou@linux.dev: fix zswap_pools_lock usages after changing to percpu_ref]
Link: https://lkml.kernel.org/r/20240228154954.3028626-1-chengming.zhou@linux.dev
Link: https://lkml.kernel.org/r/20240210-zswap-global-lru-v3-2-200495333595@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/zswap: optimize for dynamic zswap_pools", v3.
Dynamic pool creation has been supported for a long time, which maybe not
used so much in practice. But with the per-memcg lru merged, the current
structure of zswap_pool's lru and shrinker become less optimal.
In the current structure, each zswap_pool has its own lru, shrinker and
shrink_work, but only the latest zswap_pool will be the current used.
1. When memory has pressure, all shrinkers of zswap_pools will try to
shrink its lru list, there is no order between them.
2. When zswap limit hit, only the last zswap_pool's shrink_work will
try to shrink its own lru, which is inefficient.
A more natural way is to have a global zswap lru shared between all
zswap_pools, and so is the shrinker. The code becomes much simpler too.
Another optimization is changing zswap_pool kref to percpu_ref, which will
be taken reference by every zswap entry. So the scalability is better.
Testing kernel build (32 threads) in tmpfs with memory.max=2GB. (zswap
shrinker and writeback enabled with one 50GB swapfile, on a 128 CPUs
x86-64 machine, below is the average of 5 runs)
mm-unstable zswap-global-lru
real 63.20 63.12
user 1061.75 1062.95
sys 268.74 264.44
This patch (of 3):
Dynamic zswap_pool creation may create/reuse to have multiple zswap_pools
in a list, only the first will be current used.
Each zswap_pool has its own lru and shrinker, which is not necessary and
has its problem:
1. When memory has pressure, all shrinker of zswap_pools will
try to shrink its own lru, there is no order between them.
2. When zswap limit hit, only the last zswap_pool's shrink_work
will try to shrink its lru list. The rationale here was to
try and empty the old pool first so that we can completely
drop it. However, since we only support exclusive loads now,
the LRU ordering should be entirely decided by the order of
stores, so the oldest entries on the LRU will naturally be
from the oldest pool.
Anyway, having a global lru and shrinker shared by all zswap_pools is
better and efficient.
Link: https://lkml.kernel.org/r/20240210-zswap-global-lru-v3-0-200495333595@bytedance.com
Link: https://lkml.kernel.org/r/20240210-zswap-global-lru-v3-1-200495333595@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When debugging issues with a workload using SysV shmem, Michal Hocko has
come up with a reproducer that shows how a series of mprotect() operations
can result in an elevated shm_nattch and thus leak of the resource.
The problem is caused by wrong assumptions in vma_merge() commit
714965ca82 ("mm/mmap: start distinguishing if vma can be removed in
mergeability test"). The shmem vmas have a vma_ops->close callback that
decrements shm_nattch, and we remove the vma without calling it.
vma_merge() has thus historically avoided merging vma's with
vma_ops->close and commit 714965ca82 was supposed to keep it that way.
It relaxed the checks for vma_ops->close in can_vma_merge_after() assuming
that it is never called on a vma that would be a candidate for removal.
However, the vma_merge() code does also use the result of this check in
the decision to remove a different vma in the merge case 7.
A robust solution would be to refactor vma_merge() code in a way that the
vma_ops->close check is only done for vma's that are actually going to be
removed, and not as part of the preliminary checks. That would both solve
the existing bug, and also allow additional merges that the checks
currently prevent unnecessarily in some cases.
However to fix the existing bug first with a minimized risk, and for
easier stable backports, this patch only adds a vma_ops->close check to
the buggy case 7 specifically. All other cases of vma removal are covered
by the can_vma_merge_before() check that includes the test for
vma_ops->close.
The reproducer code, adapted from Michal Hocko's code:
int main(int argc, char *argv[]) {
int segment_id;
size_t segment_size = 20 * PAGE_SIZE;
char * sh_mem;
struct shmid_ds shmid_ds;
key_t key = 0x1234;
segment_id = shmget(key, segment_size,
IPC_CREAT | IPC_EXCL | S_IRUSR | S_IWUSR);
sh_mem = (char *)shmat(segment_id, NULL, 0);
mprotect(sh_mem + 2*PAGE_SIZE, PAGE_SIZE, PROT_NONE);
mprotect(sh_mem + PAGE_SIZE, PAGE_SIZE, PROT_WRITE);
mprotect(sh_mem + 2*PAGE_SIZE, PAGE_SIZE, PROT_WRITE);
shmdt(sh_mem);
shmctl(segment_id, IPC_STAT, &shmid_ds);
printf("nattch after shmdt(): %lu (expected: 0)\n", shmid_ds.shm_nattch);
if (shmctl(segment_id, IPC_RMID, 0))
printf("IPCRM failed %d\n", errno);
return (shmid_ds.shm_nattch) ? 1 : 0;
}
Link: https://lkml.kernel.org/r/20240222215930.14637-2-vbabka@suse.cz
Fixes: 714965ca82 ("mm/mmap: start distinguishing if vma can be removed in mergeability test")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After ptep_clear_flush(), if we find that src_folio is pinned we will fail
UFFDIO_MOVE and put src_folio back to src_pte entry, but the change to
src_folio->{mapping,index} is not restored in this process. This is not
what we expected, so fix it.
This can cause the rmap for that page to be invalid, possibly resulting
in memory corruption. At least swapout+migration would no longer work,
because we might fail to locate the mappings of that folio.
Link: https://lkml.kernel.org/r/20240222080815.46291-1-zhengqi.arch@bytedance.com
Fixes: adef440691 ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sven reports an infinite loop in __alloc_pages_slowpath() for costly order
__GFP_RETRY_MAYFAIL allocations that are also GFP_NOIO. Such combination
can happen in a suspend/resume context where a GFP_KERNEL allocation can
have __GFP_IO masked out via gfp_allowed_mask.
Quoting Sven:
1. try to do a "costly" allocation (order > PAGE_ALLOC_COSTLY_ORDER)
with __GFP_RETRY_MAYFAIL set.
2. page alloc's __alloc_pages_slowpath tries to get a page from the
freelist. This fails because there is nothing free of that costly
order.
3. page alloc tries to reclaim by calling __alloc_pages_direct_reclaim,
which bails out because a zone is ready to be compacted; it pretends
to have made a single page of progress.
4. page alloc tries to compact, but this always bails out early because
__GFP_IO is not set (it's not passed by the snd allocator, and even
if it were, we are suspending so the __GFP_IO flag would be cleared
anyway).
5. page alloc believes reclaim progress was made (because of the
pretense in item 3) and so it checks whether it should retry
compaction. The compaction retry logic thinks it should try again,
because:
a) reclaim is needed because of the early bail-out in item 4
b) a zonelist is suitable for compaction
6. goto 2. indefinite stall.
(end quote)
The immediate root cause is confusing the COMPACT_SKIPPED returned from
__alloc_pages_direct_compact() (step 4) due to lack of __GFP_IO to be
indicating a lack of order-0 pages, and in step 5 evaluating that in
should_compact_retry() as a reason to retry, before incrementing and
limiting the number of retries. There are however other places that
wrongly assume that compaction can happen while we lack __GFP_IO.
To fix this, introduce gfp_compaction_allowed() to abstract the __GFP_IO
evaluation and switch the open-coded test in try_to_compact_pages() to use
it.
Also use the new helper in:
- compaction_ready(), which will make reclaim not bail out in step 3, so
there's at least one attempt to actually reclaim, even if chances are
small for a costly order
- in_reclaim_compaction() which will make should_continue_reclaim()
return false and we don't over-reclaim unnecessarily
- in __alloc_pages_slowpath() to set a local variable can_compact,
which is then used to avoid retrying reclaim/compaction for costly
allocations (step 5) if we can't compact and also to skip the early
compaction attempt that we do in some cases
Link: https://lkml.kernel.org/r/20240221114357.13655-2-vbabka@suse.cz
Fixes: 3250845d05 ("Revert "mm, oom: prevent premature OOM killer invocation for high order request"")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Sven van Ashbrook <svenva@chromium.org>
Closes: https://lore.kernel.org/all/CAG-rBihs_xMKb3wrMO1%2B-%2Bp4fowP9oy1pa_OTkfxBzPUVOZF%2Bg@mail.gmail.com/
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Curtis Malainey <cujomalainey@chromium.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This empty wrapped exists only for !CONFIG_MEMCG_KMEM and seems it was
never used. Probably a leftover from development of a series.
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
We already have the inc_slabs_node() after kmem_cache_node->node[node]
initialized in early_kmem_cache_node_alloc(), this special case of
inc_slabs_node() can be removed. Then we don't need to consider the
existence of kmem_cache_node in inc_slabs_node() anymore.
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Use the form of *@param which kernel-doc recognizes now.
This resolves the warnings from "make htmldocs" as reported in [1].
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: [1] https://lore.kernel.org/r/20240223153636.41358be5@canb.auug.org.au/
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
or aren't considered appropriate for backporting.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZd5oIgAKCRDdBJ7gKXxA
jhf8AQDGZsGgDK3CB+5x/fQr4lFqG8FuhJaHaQml+Xxm1WbEowEAy/lk/dw2isQI
niVq8BqSlLBpEnRpYNtaO902zkVD3gM=
=iLqf
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-02-27-14-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Six hotfixes. Three are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-27-14-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
mm: cachestat: fix folio read-after-free in cache walk
MAINTAINERS: add memory mapping entry with reviewers
mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index
kasan: revert eviction of stack traces in generic mode
stackdepot: use variable size records for non-evictable entries
The SLAB_KASAN flag prevents merging of caches in some configurations,
which is handled in a rather complicated way via kasan_never_merge().
Since we now have a generic SLAB_NO_MERGE flag, we can instead use it
for KASAN caches in addition to SLAB_KASAN in those configurations,
and simplify the SLAB_NEVER_MERGE handling.
Tested-by: Xiongwei Song <xiongwei.song@windriver.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The values of SLAB_ cache creation flags are defined by hand, which is
tedious and error-prone. Use an enum to assign the bit number and a
__SLAB_FLAG_BIT() macro to #define the final flags.
This renumbers the flag values, which is OK as they are only used
internally.
Also define a __SLAB_FLAG_UNUSED macro to assign value to flags disabled
by their respective config options in a unified and sparse-friendly way.
Reviewed-and-tested-by: Xiongwei Song <xiongwei.song@windriver.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The SLAB_MEM_SPREAD flag used to be implemented in SLAB, which was
removed. SLUB instead relies on the page allocator's NUMA policies.
Change the flag's value to 0 to free up the value it had, and mark it
for full removal once all users are gone.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Closes: https://lore.kernel.org/all/20240131172027.10f64405@gandalf.local.home/
Reviewed-and-tested-by: Xiongwei Song <xiongwei.song@windriver.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZdpH9gAKCRDfioYZHlFs
ZwZlAQDE+PxTJnjCXDVnDylVF4yeJF2G/wSkH1CFVFVxa0OjhAD/ZFScS/nz/76l
1IYYiiLqmVO5DdmJtfKtq16m7e1cZwc=
=PuPF
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A collection of significant fixes for the CXL subsystem.
The largest change in this set, that bordered on "new development", is
the fix for the fact that the location of the new qos_class attribute
did not match the Documentation. The fix ends up deleting more code
than it added, and it has a new unit test to backstop basic errors in
this interface going forward. So the "red-diff" and unit test saved
the "rip it out and try again" response.
In contrast, the new notification path for firmware reported CXL
errors (CXL CPER notifications) has a locking context bug that can not
be fixed with a red-diff. Given where the release cycle stands, it is
not comfortable to squeeze in that fix in these waning days. So, that
receives the "back it out and try again later" treatment.
There is a regression fix in the code that establishes memory NUMA
nodes for platform CXL regions. That has an ack from x86 folks. There
are a couple more fixups for Linux to understand (reassemble) CXL
regions instantiated by platform firmware. The policy around platforms
that do not match host-physical-address with system-physical-address
(i.e. systems that have an address translation mechanism between the
address range reported in the ACPI CEDT.CFMWS and endpoint decoders)
has been softened to abort driver load rather than teardown the memory
range (can cause system hangs). Lastly, there is a robustness /
regression fix for cases where the driver would previously continue in
the face of error, and a fixup for PCI error notification handling.
Summary:
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9"
* tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Fix load failures due to single window creation failure
acpi/ghes: Remove CXL CPER notifications
cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
cxl/test: Add support for qos_class checking
cxl: Fix sysfs export of qos_class for memdev
cxl: Remove unnecessary type cast in cxl_qos_class_verify()
cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf'
cxl/region: Allow out of order assembly of autodiscovered regions
cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
x86/numa: Fix the sort compare func used in numa_fill_memblks()
x86/numa: Fix the address overlap check in numa_fill_memblks()
cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
Use the new writeback_iter() directly instead of indirecting through a
callback.
[hch@lst.de: ported to the while based iter style]
Link: https://lkml.kernel.org/r/20240215063649.2164017-15-hch@lst.de
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Refactor the code left in write_cache_pages into an iterator that the file
system can call to get the next folio for a writeback operation:
struct folio *folio = NULL;
while ((folio = writeback_iter(mapping, wbc, folio, &error))) {
error = <do per-folio writeback>;
}
The twist here is that the error value is passed by reference, so that the
iterator can restore it when breaking out of the loop.
Handling of the magic AOP_WRITEPAGE_ACTIVATE value stays outside the
iterator and needs is just kept in the write_cache_pages legacy wrapper.
in preparation for eventually killing it off.
Heavily based on a for_each* based iterator from Matthew Wilcox.
Link: https://lkml.kernel.org/r/20240215063649.2164017-14-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move the loop for should-we-write-this-folio to writeback_get_folio.
[hch@lst.de: fold loop into existing helper instead of a separate one per Jan]
Link: https://lkml.kernel.org/r/20240215063649.2164017-13-hch@lst.de
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of keeping our own local iterator variable, use the one just added
to folio_batch.
Link: https://lkml.kernel.org/r/20240215063649.2164017-12-hch@lst.de
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Collapse the two nested loops into one. This is needed as a step towards
turning this into an iterator.
Note that this drops the "index <= end" check in the previous outer loop
and just relies on filemap_get_folios_tag() to return 0 entries when index
> end. This actually has a subtle implication when end == -1 because then
the returned index will be -1 as well and thus if there is page present on
index -1, we could be looping indefinitely. But as the comment in
filemap_get_folios_tag documents this as already broken anyway we should
not worry about it here either. The fix for that would probably a change
to the filemap_get_folios_tag() calling convention.
[hch@lst.de: update the commit log per Jan]
Link: https://lkml.kernel.org/r/20240215063649.2164017-10-hch@lst.de
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This simple helper will be the basis of the writeback iterator. To make
this work, we need to remember the current index and end positions in
writeback_control.
[hch@lst.de: heavily rebased, add helpers to get the tag and end index, don't keep the end index in struct writeback_control]
Link: https://lkml.kernel.org/r/20240215063649.2164017-9-hch@lst.de
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reduce write_cache_pages() by about 30 lines; much of it is commentary,
but it all bundles nicely into an obvious function.
[hch@lst.de: rename should_writeback_folio to folio_prepare_writeback per Jan]
Link: https://lkml.kernel.org/r/20240215063649.2164017-8-hch@lst.de
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rework the way we deal with the cleanup after the writepage call.
First handle the magic AOP_WRITEPAGE_ACTIVATE separately from real error
returns to get it out of the way of the actual error handling path.
The split the handling on intgrity vs non-integrity branches first, and
return early using a goto for the non-ingegrity early loop condition to
remove the need for the done and done_index local variables, and for
assigning the error to ret when we can just return error directly.
Link: https://lkml.kernel.org/r/20240215063649.2164017-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mapping->writeback_index is only [1] used as the starting point for
range_cyclic writeback, so there is no point in updating it for other
types of writeback.
[1] except for btrfs_defrag_file which does really odd things with
mapping->writeback_index. But btrfs doesn't use write_cache_pages at all,
so this isn't relevant here.
Link: https://lkml.kernel.org/r/20240215063649.2164017-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When exiting write_cache_pages early due to a non-integrity write failure,
wbc->nr_to_write currently doesn't account for the folio we just failed to
write. This doesn't matter because the callers always ingore the value on
a failure, but moving the update to common code will allow to simplify the
code, so do it.
Link: https://lkml.kernel.org/r/20240215063649.2164017-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When write_cache_pages finishes writing out a folio, it fails to update
done_index to account for the number of pages in the folio just written.
That means when range_cyclic writeback is restarted, it will be restarted
at this folio instead of after it as it should. Fix that by updating
done_index before breaking out of the loop.
Link: https://lkml.kernel.org/r/20240215063649.2164017-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "convert write_cache_pages() to an iterator", v8.
This is an evolution of the series Matthew Wilcox originally sent in June
2023, which has changed quite a bit since and now has a while based
iterator.
This patch (of 14):
mapping_set_error should only be called on 0 returns (which it ignores) or
a negative error code.
writepage_cb ends up being able to call writepage_cb on the magic
AOP_WRITEPAGE_ACTIVATE return value from ->writepage which means success
but the caller needs to unlock the page. Ignore that and just call
mapping_set_error on negative errors.
(no fixes tag as this goes back more than 20 years over various renames
and refactors so I've given up chasing down the original introduction)
Link: https://lkml.kernel.org/r/20240215063649.2164017-1-hch@lst.de
Link: https://lkml.kernel.org/r/20240215063649.2164017-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The purpose is stopping splitting large folios whose mapcount are 2 or
above. Folios whose estimated_shares = 0 should be still perfect and even
better candidates than estimated_shares = 1.
Consider a pte-mapped large folio with 16 subpages, if we unmap 1-15, the
current code will split folios and reclaim them while madvise goes on this
folio; but if we unmap subpage 0, we will keep this folio and break. This
is weird.
For pmd-mapped large folios, we can still use "= 1" as the condition as
anyway we have the entire map for it. So this patch doesn't change the
condition for pmd-mapped large folios. This also explains why we had been
using "= 1" for both pmd-mapped and pte-mapped large folios before commit
07e8c82b5e ("madvise: convert madvise_cold_or_pageout_pte_range() to use
folios"), because in the past, we used the mapcount of the specific
subpage, since the subpage had pte present, its mapcount wouldn't be 0.
The problem can be quite easily reproduced by writing a small program,
unmapping the first subpage of a pte-mapped large folio vs. unmapping
anyone other than the first subpage.
Link: https://lkml.kernel.org/r/20240221085036.105621-1-21cnbao@gmail.com
Fixes: 2f406263e3 ("madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The code is quite hard to read, we are still writing swap_map after
errors happen. Though the written value is as before,
has_cache = count & SWAP_HAS_CACHE;
count &= ~SWAP_HAS_CACHE;
[snipped]
WRITE_ONCE(p->swap_map[offset], count | has_cache);
It would be better to entirely drop the WRITE_ONCE for both
performance and readability.
[akpm@linux-foundation.org: avoid using goto]
Link: https://lkml.kernel.org/r/20240221091028.123122-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Report quota options among the set of mount options. This allows proper
user visibility into whether quotas are enabled or not.
Link: https://lkml.kernel.org/r/20240129120131.21145-1-jack@suse.cz
Fixes: e09764cff4 ("shmem: quota support")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During migration in a memory compaction, free pages are placed in an array
of page lists based on their order. But the desired free page order
(i.e., the order of a source page) might not be always present, thus
leading to migration failures and premature compaction termination. Split
a high order free pages when source migration page has a lower order to
increase migration successful rate.
Note: merging free pages when a migration fails and a lower order free
page is returned via compaction_free() is possible, but there is too much
work. Since the free pages are not buddy pages, it is hard to identify
these free pages using existing PFN-based page merging algorithm.
Link: https://lkml.kernel.org/r/20240220183220.1451315-5-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Before last commit, memory compaction only migrates order-0 folios and
skips >0 order folios. Last commit splits all >0 order folios during
compaction. This commit migrates >0 order folios during compaction by
keeping isolated free pages at their original size without splitting them
into order-0 pages and using them directly during migration process.
What is different from the prior implementation:
1. All isolated free pages are kept in a NR_PAGE_ORDERS array of page
lists, where each page list stores free pages in the same order.
2. All free pages are not post_alloc_hook() processed nor buddy pages,
although their orders are stored in first page's private like buddy
pages.
3. During migration, in new page allocation time (i.e., in
compaction_alloc()), free pages are then processed by post_alloc_hook().
When migration fails and a new page is returned (i.e., in
compaction_free()), free pages are restored by reversing the
post_alloc_hook() operations using newly added
free_pages_prepare_fpi_none().
Step 3 is done for a latter optimization that splitting and/or merging
free pages during compaction becomes easier.
Note: without splitting free pages, compaction can end prematurely due to
migration will return -ENOMEM even if there is free pages. This happens
when no order-0 free page exist and compaction_alloc() return NULL.
Link: https://lkml.kernel.org/r/20240220183220.1451315-4-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
migrate_pages() supports >0 order folio migration and during compaction,
even if compaction_alloc() cannot provide >0 order free pages,
migrate_pages() can split the source page and try to migrate the base
pages from the split. It can be a baseline and start point for adding
support for compacting >0 order folios.
Link: https://lkml.kernel.org/r/20240220183220.1451315-3-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Suggested-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Enable >0 order folio memory compaction", v7.
This patchset enables >0 order folio memory compaction, which is one of
the prerequisitions for large folio support[1].
I am aware of that split free pages is necessary for folio migration in
compaction, since if >0 order free pages are never split and no order-0
free page is scanned, compaction will end prematurely due to migration
returns -ENOMEM. Free page split becomes a must instead of an
optimization.
lkp ncompare results (on a 8-CPU (Intel Xeon E5-2650 v4 @2.20GHz) 16G VM)
for default LRU (-no-mglru) and CONFIG_LRU_GEN are shown at the bottom,
copied from V3[4]. In sum, most of vm-scalability applications do not see
performance change, and the others see ~4% to ~26% performance boost under
default LRU and ~2% to ~6% performance boost under CONFIG_LRU_GEN.
Overview
===
To support >0 order folio compaction, the patchset changes how free pages
used for migration are kept during compaction. Free pages used to be
split into order-0 pages that are post allocation processed (i.e.,
PageBuddy flag cleared, page order stored in page->private is zeroed, and
page reference is set to 1). Now all free pages are kept in a
NR_PAGE_ORDER array of page lists based on their order without post
allocation process. When migrate_pages() asks for a new page, one of the
free pages, based on the requested page order, is then processed and given
out. And THP <2MB would need this feature.
[1] https://lore.kernel.org/linux-mm/f8d47176-03a8-99bf-a813-b5942830fd73@arm.com/
[2] https://lore.kernel.org/linux-mm/20231113170157.280181-1-zi.yan@sent.com/
[3] https://lore.kernel.org/linux-mm/20240123034636.1095672-1-zi.yan@sent.com/
[4] https://lore.kernel.org/linux-mm/20240202161554.565023-1-zi.yan@sent.com/
[5] https://lore.kernel.org/linux-mm/20240212163510.859822-1-zi.yan@sent.com/
[6] https://lore.kernel.org/linux-mm/20240214220420.1229173-1-zi.yan@sent.com/
[7] https://lore.kernel.org/linux-mm/20240216170432.1268753-1-zi.yan@sent.com/
This patch (of 4):
Commit 0a54864f8d ("kasan: remove PG_skip_kasan_poison flag") removes
the use of fpi_flags in should_skip_kasan_poison() and fpi_flags is only
passed to should_skip_kasan_poison() in free_pages_prepare(). Remove the
unused parameter.
Link: https://lkml.kernel.org/r/20240220183220.1451315-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20240220183220.1451315-2-zi.yan@sent.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Actually we seldom use the class_idx returned from get_zspage_mapping(),
only the zspage->fullness is useful, just use zspage->fullness to remove
this helper.
Note zspage->fullness is not stable outside pool->lock, remove redundant
"VM_BUG_ON(fullness != ZS_INUSE_RATIO_0)" in async_free_zspage() since we
already have the same VM_BUG_ON() in __free_zspage(), which is safe to
access zspage->fullness with pool->lock held.
Link: https://lkml.kernel.org/r/20240220-b4-zsmalloc-cleanup-v1-3-5c5ee4ccdd87@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We must remove_zspage() from its current fullness list, then use
insert_zspage() to update its fullness and insert to new fullness list.
Obviously, remove_zspage() doesn't need the fullness parameter.
Link: https://lkml.kernel.org/r/20240220-b4-zsmalloc-cleanup-v1-2-5c5ee4ccdd87@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/zsmalloc: some cleanup for get/set_zspage_mapping()".
The discussion[1] with Sergey shows there are some cleanup works to do
in get/set_zspage_mapping():
- the fullness returned from get_zspage_mapping() is not stable outside
pool->lock, this usage pattern is confusing, but should be ok in this
free_zspage path.
- we seldom use the class_idx returned from get_zspage_mapping(), only
free_zspage path use to get its class.
- set_zspage_mapping() always set the zspage->class, but it's never
changed after zspage allocated.
[1] https://lore.kernel.org/all/a6c22e30-cf10-4122-91bc-ceb9fb57a5d6@bytedance.com/
This patch (of 3):
We only need to update zspage->fullness when insert_zspage(), since
zspage->class is never changed after allocated.
Link: https://lkml.kernel.org/r/20240220-b4-zsmalloc-cleanup-v1-0-5c5ee4ccdd87@bytedance.com
Link: https://lkml.kernel.org/r/20240220-b4-zsmalloc-cleanup-v1-1-5c5ee4ccdd87@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
No need to continue try compact memory if pending fatal signal, allow loop
termination earlier in compact_nodes().
The existing fatal_signal_pending() check does make compact_zone()
break out of the while loop, but it still enters the next zone/next
nid, and some unnecessary functions(eg, lru_add_drain) are called.
There was no observable benefit from the new test, it is just found
from code inspection when refactoring compact_node().
Link: https://lkml.kernel.org/r/20240208022508.1771534-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We used to rely on the returned -ENOSPC of zpool_malloc() to increase
reject_compress_poor. But the code wouldn't get to there after commit
744e188592 ("crypto: scomp - fix req->dst buffer overflow") as the new
code will goto out immediately after the special compression case happens.
So there might be no longer a chance to execute zpool_malloc now. We are
incorrectly increasing zswap_reject_compress_fail instead. Thus, we need
to fix the counters handling right after compressions return ENOSPC. This
patch also centralizes the counters handling for all of compress_poor,
compress_fail and alloc_fail.
Link: https://lkml.kernel.org/r/20240219211935.72394-1-21cnbao@gmail.com
Fixes: 744e188592 ("crypto: scomp - fix req->dst buffer overflow")
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The comment is confusing that Pool lock should be held as this function
accesses first_num above the __encode_handle() because first_num is the
element of z3fold_header which is protected by z3fold_header->page_lock.
I found the same comment for encode_handle() in zbud.c by accident ,Pool
lock should be held as this function accesses first|last_chunks, which is
the element of zbud_header and it does not have any lock, so pool lock
should be held.
Z3fold is based on zbud, maybe the comment come from zbud, but it was
wrong, so fix it.
Link: https://lkml.kernel.org/r/20240219024453.2240147-1-hezhongkun.hzk@bytedance.com
Signed-off-by: Zhongkun He <hezhongkun.hzk@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The zspage->isolated is not used anywhere, we don't need to maintain it,
which needs to hold the heavy pool lock to update it, so just remove it.
Link: https://lkml.kernel.org/r/20240219-b4-szmalloc-migrate-v1-3-34cd49c6545b@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The migrate write lock is to protect the race between zspage migration and
zspage objects' map users.
We only need to lock out the map users of src zspage, not dst zspage,
which is safe to map by users concurrently, since we only need to do
obj_malloc() from dst zspage.
So we can remove the migrate_write_lock_nested() use case.
As we are here, cleanup the __zs_compact() by moving putback_zspage()
outside of migrate_write_unlock since we hold pool lock, no malloc or free
users can come in.
Link: https://lkml.kernel.org/r/20240219-b4-szmalloc-migrate-v1-2-34cd49c6545b@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/zsmalloc: fix and optimize objects/page migration".
This series is to fix and optimize the zsmalloc objects/page migration.
This patch (of 3):
migrate_write_lock() is a empty function when !CONFIG_COMPACTION, in which
case zs_compact() can be triggered from shrinker reclaim context. (Maybe
it's better to rename it to zs_shrink()?)
And zspage map object users rely on this migrate_read_lock() so object
won't be migrated elsewhere.
Fix it by always implementing the migrate_write_lock() related functions.
Link: https://lkml.kernel.org/r/20240219-b4-szmalloc-migrate-v1-0-34cd49c6545b@bytedance.com
Link: https://lkml.kernel.org/r/20240219-b4-szmalloc-migrate-v1-1-34cd49c6545b@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Support the PSI-driven quota self-tuning from DAMON_RECLAIM by introducing
yet another parameter, 'quota_mem_pressure_us'. Users can set the desired
amount of memory pressure stall time per each quota reset interval using
the parameter. Then DAMON_RECLAIM monitor the memory pressure stall time,
specifically system-wide memory 'some' PSI value that increased during the
given time interval, and self-tune the quota using the DAMOS core logic.
Link: https://lkml.kernel.org/r/20240219194431.159606-20-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS supports user-feedback driven quota auto-tuning, but only DAMON
sysfs interface is using it. Add support of the feature on DAMON_RECLAIM
by adding one more input parameter, namely 'quota_autotune_feedback', for
providing the user feedback to DAMON_RECLAIM. It assumes the target value
of the feedback is 10,000.
Link: https://lkml.kernel.org/r/20240219194431.159606-19-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend DAMON sysfs interface to support the PSI-based quota auto-tuning by
adding a new file, 'target_metric' under the quota goal directory. Old
users don't get any behavioral changes since the default value of the
metric is 'user input'.
Link: https://lkml.kernel.org/r/20240219194431.159606-15-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend DAMOS quota goal metric with system wide memory pressure stall
time. Specifically, the system level 'some' PSI for memory is used. The
target value can be set in microseconds. DAMOS measures the increased
amount of the PSI metric in last quota_reset_interval and use the ratio of
it versus the user-specified target PSI value as the score for the
auto-tuning feedback loop.
Link: https://lkml.kernel.org/r/20240219194431.159606-14-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS quota auto-tuning asks users to assess the current tuned quota and
provide the feedback in a manual and repeated way. It allows users
generate the feedback from a source that the kernel cannot access, and
writing a script or a function for doing the manual and repeated feeding
is not a big deal. However, additional works are additional works, and it
could be more efficient if DAMOS could do the fetch itself, especially in
case of DAMON sysfs interface use case, since it can avoid the context
switches between the user-space and the kernel-space, though the overhead
would be only trivial in most cases. Also in many cases, feedbacks could
be made from kernel-accessible sources, such as PSI, CPU usage, etc. Make
the quota goal to support multiple types of metrics including such ones.
Link: https://lkml.kernel.org/r/20240219194431.159606-13-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS quota auto-tuning feature let users to set the goal by providing a
function for getting the current score of the tuned quota. It allows
flexible goal setup, but only simple user-set quota is currently being
used. As a result, the only user of the DAMOS quota auto-tuning is using
a silly void pointer casting based score value passing function. Simplify
the interface and the user code by letting user directly set the target
and the current value.
Link: https://lkml.kernel.org/r/20240219194431.159606-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS quota auto-tuning feature supports static signle goal and dynamic
multiple goals via DAMON kernel API, specifically via ->goal and ->goals
fields of damos_quota struct, respectively. All in-tree DAMOS kernel API
users are using only the dynamic multiple goals now. Remove the unsued
static single goal interface.
Link: https://lkml.kernel.org/r/20240219194431.159606-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface implements multiple quota auto-tuning goals on its
level since the DAMOS core logic was supporting only single goal. Now the
core logic supports multiple goals on its level. Update DAMON sysfs
interface to reuse the core logic and drop unnecessary duplicated multiple
goals implementation.
Link: https://lkml.kernel.org/r/20240219194431.159606-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The feedback-driven DAMOS quota auto-tuning feature allows only single
goal to the DAMON kernel API users. The API users could implement
multiple goals for the end-users on their level, and that's what DAMON
sysfs interface is doing. More DAMON kernel API users such as
DAMON_RECLAIM would need to do similar work. To reduce unnecessary future
duplciated efforts, support multiple goals from DAMOS core layer. To make
the support in minimum non-destructive change, keep the old single goal
setup interface, and add multiple goals setup. The single goal will
treated as one of the multiple goals, so old API users are not required to
make any change.
Link: https://lkml.kernel.org/r/20240219194431.159606-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'struct damos_quota' is not small now. Split out fields for quota goal to
a separate struct for easier reading.
Link: https://lkml.kernel.org/r/20240219194431.159606-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement yet another kdamond 'state' file input command, namely
'update_schemes_effective_quotas'. If it is written, the
'effective_bytes' files of the kdamond will be updated to provide the
current effective size quota of each scheme in bytes.
Link: https://lkml.kernel.org/r/20240219194431.159606-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface allows users to set two types of quotas, namely time
quota and size quota. DAMOS converts time quota to a size quota and use
smaller one among the resulting two size quotas. The resulting effective
size quota can be helpful for debugging and analysis, but not exposed to
the user. The recently added feedback-driven quota auto-tuning is making
it even more mysterious.
Implement a DAMON sysfs interface read-only empty file, namely
'effective_bytes', under the quota goal DAMON sysfs directory. It will be
extended to expose the effective quota to the end user.
Link: https://lkml.kernel.org/r/20240219194431.159606-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
