In the buffered write path, the dirty page owns the qgroup reserve until
it creates an ordered_extent.
Therefore, any errors that occur before the ordered_extent is created
must free that reservation, or else the space is leaked. The fstest
generic/475 exercises various IO error paths, and is able to trigger
errors in cow_file_range where we fail to get to allocating the ordered
extent. Note that because we *do* clear delalloc, we are likely to
remove the inode from the delalloc list, so the inodes/pages to not have
invalidate/launder called on them in the commit abort path.
This results in failures at the unmount stage of the test that look like:
BTRFS: error (device dm-8 state EA) in cleanup_transaction:2018: errno=-5 IO failure
BTRFS: error (device dm-8 state EA) in btrfs_replace_file_extents:2416: errno=-5 IO failure
BTRFS warning (device dm-8 state EA): qgroup 0/5 has unreleased space, type 0 rsv 28672
------------[ cut here ]------------
WARNING: CPU: 3 PID: 22588 at fs/btrfs/disk-io.c:4333 close_ctree+0x222/0x4d0 [btrfs]
Modules linked in: btrfs blake2b_generic libcrc32c xor zstd_compress raid6_pq
CPU: 3 PID: 22588 Comm: umount Kdump: loaded Tainted: G W 6.10.0-rc7-gab56fde445b8 #21
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:close_ctree+0x222/0x4d0 [btrfs]
RSP: 0018:ffffb4465283be00 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffffa1a1818e1000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffb4465283bbe0 RDI: ffffa1a19374fcb8
RBP: ffffa1a1818e13c0 R08: 0000000100028b16 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000003 R12: ffffa1a18ad7972c
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f9168312b80(0000) GS:ffffa1a4afcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f91683c9140 CR3: 000000010acaa000 CR4: 00000000000006f0
Call Trace:
<TASK>
? close_ctree+0x222/0x4d0 [btrfs]
? __warn.cold+0x8e/0xea
? close_ctree+0x222/0x4d0 [btrfs]
? report_bug+0xff/0x140
? handle_bug+0x3b/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? close_ctree+0x222/0x4d0 [btrfs]
generic_shutdown_super+0x70/0x160
kill_anon_super+0x11/0x40
btrfs_kill_super+0x11/0x20 [btrfs]
deactivate_locked_super+0x2e/0xa0
cleanup_mnt+0xb5/0x150
task_work_run+0x57/0x80
syscall_exit_to_user_mode+0x121/0x130
do_syscall_64+0xab/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f916847a887
---[ end trace 0000000000000000 ]---
BTRFS error (device dm-8 state EA): qgroup reserved space leaked
Cases 2 and 3 in the out_reserve path both pertain to this type of leak
and must free the reserved qgroup data. Because it is already an error
path, I opted not to handle the possible errors in
btrfs_free_qgroup_data.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
In the buffered write path, dirty pages can be said to "own" the qgroup
reservation until they create an ordered_extent. It is possible for
there to be outstanding dirty pages when a transaction is aborted, in
which case there is no cancellation path for freeing this reservation
and it is leaked.
We do already walk the list of outstanding delalloc inodes in
btrfs_destroy_delalloc_inodes() and call invalidate_inode_pages2() on them.
This does *not* call btrfs_invalidate_folio(), as one might guess, but
rather calls launder_folio() and release_folio(). Since this is a
reservation associated with dirty pages only, rather than something
associated with the private bit (ordered_extent is cancelled separately
already in the cleanup transaction path), implementing this release
should be done via launder_folio.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently sctx->stat.last_physical only got updated in the following
cases:
- When the last stripe of a non-RAID56 chunk is scrubbed
This implies a pitfall, if the last stripe is at the chunk boundary,
and we finished the scrub of the whole chunk, we won't update
last_physical at all until the next chunk.
- When a P/Q stripe of a RAID56 chunk is scrubbed
This leads the following two problems:
- sctx->stat.last_physical is not updated for a almost full chunk
This is especially bad, affecting scrub resume, as the resume would
start from last_physical, causing unnecessary re-scrub.
- "btrfs scrub status" will not report any progress for a long time
Fix the problem by properly updating @last_physical after each stripe is
scrubbed.
And since we're here, for the sake of consistency, use spin lock to
protect the update of @last_physical, just like all the remaining
call sites touching sctx->stat.
Reported-by: Michel Palleau <michel.palleau@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAMFk-+igFTv2E8svg=cQ6o3e6CrR5QwgQ3Ok9EyRaEvvthpqCQ@mail.gmail.com/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there are two locations which need to calculate the real
length of a stripe (which can be at the end of a chunk, and the chunk
size may not always be 64K aligned).
Factor them into a helper as we're going to have a third user soon.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When using the shadow call stack sanitizer, all code must be compiled
with the -ffixed-x18 flag, but this flag is not currently being passed
to Rust. This results in crashes that are extremely difficult to debug.
To ensure that nobody else has to go through the same debugging session
that I had to, prevent configurations that enable both SHADOW_CALL_STACK
and RUST.
It is rather common for people to backport 724a75ac95 ("arm64: rust:
Enable Rust support for AArch64"), so I recommend applying this fix all
the way back to 6.1.
Cc: stable@vger.kernel.org # 6.1 and later
Fixes: 724a75ac95 ("arm64: rust: Enable Rust support for AArch64")
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20240729-shadow-call-stack-v4-1-2a664b082ea4@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A number of Arm Ltd CPUs suffer from errata whereby an MSR to the SSBS
special-purpose register does not affect subsequent speculative
instructions, permitting speculative store bypassing for a window of
time.
We worked around this for a number of CPUs in commits:
* 7187bb7d0b ("arm64: errata: Add workaround for Arm errata 3194386 and 3312417")
* 75b3c43eab ("arm64: errata: Expand speculative SSBS workaround")
Since then, similar errata have been published for a number of other Arm
Ltd CPUs, for which the same mitigation is sufficient. This is described
in their respective Software Developer Errata Notice (SDEN) documents:
* Cortex-A76 (MP052) SDEN v31.0, erratum 3324349
https://developer.arm.com/documentation/SDEN-885749/3100/
* Cortex-A77 (MP074) SDEN v19.0, erratum 3324348
https://developer.arm.com/documentation/SDEN-1152370/1900/
* Cortex-A78 (MP102) SDEN v21.0, erratum 3324344
https://developer.arm.com/documentation/SDEN-1401784/2100/
* Cortex-A78C (MP138) SDEN v16.0, erratum 3324346
https://developer.arm.com/documentation/SDEN-1707916/1600/
* Cortex-A78C (MP154) SDEN v10.0, erratum 3324347
https://developer.arm.com/documentation/SDEN-2004089/1000/
* Cortex-A725 (MP190) SDEN v5.0, erratum 3456106
https://developer.arm.com/documentation/SDEN-2832921/0500/
* Cortex-X1 (MP077) SDEN v21.0, erratum 3324344
https://developer.arm.com/documentation/SDEN-1401782/2100/
* Cortex-X1C (MP136) SDEN v16.0, erratum 3324346
https://developer.arm.com/documentation/SDEN-1707914/1600/
* Neoverse-N1 (MP050) SDEN v32.0, erratum 3324349
https://developer.arm.com/documentation/SDEN-885747/3200/
* Neoverse-V1 (MP076) SDEN v19.0, erratum 3324341
https://developer.arm.com/documentation/SDEN-1401781/1900/
Note that due to the manner in which Arm develops IP and tracks errata,
some CPUs share a common erratum number and some CPUs have multiple
erratum numbers for the same HW issue.
On parts without SB, it is necessary to use ISB for the workaround. The
spec_bar() macro used in the mitigation will expand to a "DSB SY; ISB"
sequence in this case, which is sufficient on all affected parts.
Enable the existing mitigation by adding the relevant MIDRs to
erratum_spec_ssbs_list. The list is sorted alphanumerically (involving
moving Neoverse-V3 after Neoverse-V2) so that this is easy to audit and
potentially extend again in future. The Kconfig text is also updated to
clarify the set of affected parts and the mitigation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240801101803.1982459-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add cputype definitions for Cortex-A725. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-A725 TRM:
https://developer.arm.com/documentation/107652/0001/
... in table A-247 ("MIDR_EL1 bit descriptions").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add cputype definitions for Cortex-X1C. These will be used for errata
detection in subsequent patches.
These values can be found in the Cortex-X1C TRM:
https://developer.arm.com/documentation/101968/0002/
... in section B2.107 ("MIDR_EL1, Main ID Register, EL1").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240801101803.1982459-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Sometimes the hotplug cpu stalls at the arch_cpu_idle() for a while after
workqueue_online_cpu(). When cpu stalls at the idle loop, the reschedule
IPI is pending. However the enable bit is not enabled yet so the cpu stalls
at WFI until watchdog timeout. Therefore enable the IPI before the
workqueue_online_cpu() to fix the issue.
Fixes: 63c5484e74 ("workqueue: Add multiple affinity scopes and interface to select them")
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240717031714.1946036-1-nick.hu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Handle VM_FAULT_SIGSEGV in the page fault path so that we correctly
kill the process and we don't BUG() the kernel.
Fixes: 07037db5d4 ("RISC-V: Paging and MMU")
Signed-off-by: Zhe Qiao <qiaozhe@iscas.ac.cn>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240731084547.85380-1-qiaozhe@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
It is required to check event type before checking event config.
Events with the different types can have the same config.
This check is missed for legacy mode code
For such perf usage:
sysctl -w kernel.perf_user_access=2
perf stat -e cycles,L1-dcache-loads --
driver will try to force both events to CYCLE counter.
This commit implements event type check before forcing
events on the special counters.
Signed-off-by: Shifrin Dmitry <dmitry.shifrin@syntacore.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Fixes: cc4c07c89a ("drivers: perf: Implement perf event mmap support in the SBI backend")
Link: https://lore.kernel.org/r/20240729125858.630653-1-dmitry.shifrin@syntacore.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This has a bunch of {read,write}q() calls, so it won't work on 32-bit
systems. I don't think there's any 32-bit StarFive systems, so for now
just require 64-bit.
Fixes: cabff60ca7 ("cache: Add StarFive StarLink cache management")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20240722154519.25375-2-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When alignment handling is delegated to the kernel, everything must be
word-aligned in purgatory, since the trap handler is then set to the
kexec one. Without the alignment, hitting the exception would
ultimately crash. On other occasions, the kernel's handler would take
care of exceptions.
This has been tested on a JH7110 SoC with oreboot and its SBI delegating
unaligned access exceptions and the kernel configured to handle them.
Fixes: 736e30af58 ("RISC-V: Add purgatory")
Signed-off-by: Daniel Maslowski <cyrevolt@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240719170437.247457-1-cyrevolt@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Compile-testing the crypto/caam driver on alpha showed a pre-existing
problem on alpha with iowrite64be() missing:
ERROR: modpost: "iowrite64be" [drivers/crypto/caam/caam_jr.ko] undefined!
The prototypes were added a while ago when we started using asm-generic/io.h,
but the implementation was still missing. At some point the ioread64/iowrite64
helpers were added, but the big-endian versions are still missing, and
the generic version (using readq/writeq) is would not work here.
Change it to wrap ioread64()/iowrite64() instead.
Fixes: beba3771d9 ("crypto: caam: Make CRYPTO_DEV_FSL_CAAM dependent of COMPILE_TEST")
Fixes: e19d4ebc53 ("alpha: add full ioread64/iowrite64 implementation")
Fixes: 7e772dad99 ("alpha: Use generic <asm-generic/io.h>")
Closes: https://lore.kernel.org/all/CAHk-=wgEyzSxTs467NDOVfBSzWvUS6ztcwhiy=M3xog==KBmTw@mail.gmail.com/
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
While x86_64 has PMD aligned text sections, i386 does not have this
luxery. Notably ALIGN_ENTRY_TEXT_END is empty and _etext has PAGE
alignment.
This means that text on i386 can be page granular at the tail end,
which in turn means that the PTI text clones should consistently
account for this.
Make pti_clone_entry_text() consistent with pti_clone_kernel_text().
Fixes: 16a3fe634f ("x86/mm/pti: Clone kernel-image on PTE level for 32 bit")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Guenter reported dodgy crashes on an i386-nosmp build using GCC-11
that had the form of endless traps until entry stack exhaust and then
#DF from the stack guard.
It turned out that pti_clone_pgtable() had alignment assumptions on
the start address, notably it hard assumes start is PMD aligned. This
is true on x86_64, but very much not true on i386.
These assumptions can cause the end condition to malfunction, leading
to a 'short' clone. Guess what happens when the user mapping has a
short copy of the entry text?
Use the correct increment form for addr to avoid alignment
assumptions.
Fixes: 16a3fe634f ("x86/mm/pti: Clone kernel-image on PTE level for 32 bit")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240731163105.GG33588@noisy.programming.kicks-ass.net
If a client sends out a cap update dropping caps with the prior 'seq'
just before an incoming cap revoke request, then the client may drop
the revoke because it believes it's already released the requested
capabilities.
This causes the MDS to wait indefinitely for the client to respond
to the revoke. It's therefore always a good idea to ack the cap
revoke request with the bumped up 'seq'.
Currently if the cap->issued equals to the newcaps the check_caps()
will do nothing, we should force flush the caps.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/61782
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Matthieu Baerts says:
====================
mptcp: fix duplicate data handling
In some cases, the subflow-level's copied_seq counter was incorrectly
increased, leading to an unexpected subflow reset.
Patch 1/2 fixes the RCVPRUNED MIB counter that was attached to the wrong
event since its introduction in v5.14, backported to v5.11.
Patch 2/2 fixes the copied_seq counter issues, is present since v5.10.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
====================
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-dup-data-v1-0-bde833fa628a@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a subflow receives and discards duplicate data, the mptcp
stack assumes that the consumed offset inside the current skb is
zero.
With multiple subflows receiving data simultaneously such assertion
does not held true. As a result the subflow-level copied_seq will
be incorrectly increased and later on the same subflow will observe
a bad mapping, leading to subflow reset.
Address the issue taking into account the skb consumed offset in
mptcp_subflow_discard_data().
Fixes: 04e4cd4f7c ("mptcp: cleanup mptcp_subflow_discard_data()")
Cc: stable@vger.kernel.org
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/501
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since its introduction, the mentioned MIB accounted for the wrong
event: wake-up being skipped as not-needed on some edge condition
instead of incoming skb being dropped after landing in the (subflow)
receive queue.
Move the increment in the correct location.
Fixes: ce599c5163 ("mptcp: properly account bulk freed memory")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmaqq6cACgkQ1V2XiooU
IOR9fg//Zb6OdwN7+mC8xeR+1nj1mOBiyaTvldLKR/Y2SS2bYX7zlSH/98RQo80f
d5gogzAhbg/Rpy0hul0ZffPjdxo4X1Mr14YjGHRLRW2v6Xe1hNrl38Y+YLiSaJi2
jJpnWlbW/VS6CY16ETZEuEE+tGyPC920aTpMgRLdFODWiSJtGz/YR+2nonW7yYc5
joOS64liAV1ZIXUlkrcipMwgLlYQyUntREvrwmuESMP5pLzQR7x4csUSu3OqZc8L
PJ/0vLj24w1LSlCowpkHK4bB+fyXYru5mDspebFOvFFdOmA+oWKS3KCrbZc8loaR
Gs667lkk5KAyu45Smro0TAJLfzZdh+xEps0Va2+ZY/ZfrH16QDmJjkbNcGAFLf5W
pweViM2DxmW4PnbCzxD1ZUtCcPdMjS6i/aIz+nQRUJF4Wy+irrxATRcUAxQaVXmD
szrPBLxka44GhtvgSfKdOlBn49ytT5ZBfy+vIf+N53obIYHL+onVoEsLfck0Ps3Y
sLvRQ9WBuDgnzhSqwE4Fg9Y3HsZrUOw/fo+9nTH4EHIREpUJJvHFirnfR1umkkoj
oBRplQmT7ULe0TVicRxtsluSEIpeWNogig/RgO6272e14/+AieFTZ5Q2WIWrjqnN
/Vc8GMq8+5cbSKm029drGlEv1+ZjZo2LTZGGvrrF4woYBWa/xbE=
=dTVS
-----END PGP SIGNATURE-----
Merge tag 'nf-24-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Fix a possible null-ptr-deref sometimes triggered by iptables-restore at
boot time. Register iptables {ipv4,ipv6} nat table pernet in first place
to fix this issue. Patch #1 and #2 from Kuniyuki Iwashima.
netfilter pull request 24-07-31
* tag 'nf-24-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().
netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().
====================
Link: https://patch.msgid.link/20240731213046.6194-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current logic only works if the PIO is between two
other ND user options. This fixes it so that the PIO
can also be either before or after other ND user options
(for example the first or last option in the RA).
side note: there's actually Android tests verifying
a portion of the old broken behaviour, so:
https://android-review.googlesource.com/c/kernel/tests/+/3196704
fixes those up.
Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Patrick Rohr <prohr@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Fixes: 048c796beb ("ipv6: adjust ndisc_is_useropt() to also return true for PIO")
Link: https://patch.msgid.link/20240730001748.147636-1-maze@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.
TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.
To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().
Fixes: d3750076d4 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To the best of my knowledge, Alex Elder is not being paid to support
Qualcomm IPA networking drivers, so drop the status from "supported" to
"maintained".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Alex Elder <elder@kernel.org>
Link: https://patch.msgid.link/20240730104016.22103-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Received frame from QMC contains the CRC.
Upper layers don't need this CRC and tcpdump mentioned trailing junk
data due to this CRC presence.
As some other HDLC driver, simply discard this CRC.
Fixes: d0f2258e79 ("net: wan: Add support for QMC HDLC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063133.179598-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The carrier_lock spinlock protects the carrier detection. While it is
held, framer_get_status() is called which in turn takes a mutex.
This is not correct and can lead to a deadlock.
A run with PROVE_LOCKING enabled detected the issue:
[ BUG: Invalid wait context ]
...
c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78
other info that might help us debug this:
context-{4:4}
2 locks held by ifconfig/146:
#0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664
#1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98
Avoid the spinlock usage and convert carrier_lock to a mutex.
Fixes: 54762918ca ("net: wan: fsl_qmc_hdlc: Add framer support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063104.179553-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5 misc fixes 2024-07-30
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
====================
Link: https://patch.msgid.link/20240730061638.1831002-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the documentation for mlx5_toggle_port_link states that it should
only be used after setting the port register, we add a check for the
return value from mlx5_port_set_eth_ptys to ensure the register was
successfully set before calling it.
Fixes: 667daedaec ("net/mlx5e: Toggle link only after modifying port parameters")
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit allocates a new modify header to replace the old
one when updating CT entry. But if failed to allocate a new one, eg.
exceed the max number firmware can support, modify header will be
an error pointer that will trigger a panic when deallocating it. And
the old modify header point is copied to old attr. When the old
attr is freed, the old modify header is lost.
Fix it by restoring the old attr to attr when failed to allocate a
new modify header context. So when the CT entry is freed, the right
modify header context will be freed. And the panic of accessing
error pointer is also fixed.
Fixes: 94ceffb48e ("net/mlx5e: Implement CT entry update")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Require mlx5 classifier action support when creating IPSec chains in
offload path. MLX5_IPSEC_CAP_PRIO should only be set if CONFIG_MLX5_CLS_ACT
is enabled. If CONFIG_MLX5_CLS_ACT=n and MLX5_IPSEC_CAP_PRIO is set,
configuring IPsec offload will fail due to the mlxx5 ipsec chain rules
failing to be created due to lack of classifier action support.
Fixes: fa5aa2f890 ("net/mlx5e: Use chains for IPsec policy priority offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit didn't change the body of the loop as it should.
It shouldn't be using MLX5_LAG_P1.
Fixes: 7e978e7714 ("net/mlx5: Lag, use actual number of lag ports")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch reduces the size of hw_ste_arr_optimized array that is
allocated on stack from 640 bytes (5 match STEs + 5 action STES)
to 448 bytes (2 match STEs + 5 action STES).
This fixes the 'stack guard page was hit' issue, while still fitting
majority of the usecases (up to 2 match STEs).
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case mlx5_irq_alloc fails, the previously allocated index remains
in the XArray, which could lead to inconsistencies.
Fix it by adding error handling that erases the allocated index
from the XArray if mlx5_irq_alloc returns an error.
Fixes: c36326d38d ("net/mlx5: Round-Robin EQs over IRQs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no point in recovery during device shutdown. if health
work started need to wait for it to avoid races and NULL pointer
access.
Hence, drain health WQ on shutdown callback.
Fixes: 1958fc2f07 ("net/mlx5: SF, Add auxiliary device driver")
Fixes: d2aa060d40 ("net/mlx5: Cancel health poll before sending panic teardown command")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The network maintainers need to be copied if the skbuff.h is touched.
This also helps git-send-email to figure out the proper maintainers when
touching the file.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730161404.2028175-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The skb isn't consumed in case of NETDEV_TX_BUSY, therefore don't
increment the tx_dropped counter.
Fixes: 188f4af046 ("r8169: use NETDEV_TX_{BUSY/OK}")
Cc: stable@vger.kernel.org
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/bbba9c48-8bac-4932-9aa1-d2ed63bc9433@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZqohDAAKCRDbK58LschI
g77FAQC4073GlQovH1d0owAjEbTllWAiZo7WYp/qY8GcJO5GqAEAyuefutwMQA8Z
7WxoXVrnOGxAGg/HzXJmY/w0GCaVRg8=
=nVz5
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-31
We've added 2 non-merge commits during the last 2 day(s) which contain
a total of 2 files changed, 2 insertions(+), 2 deletions(-).
The main changes are:
1) Fix BPF selftest build after tree sync with regards to a _GNU_SOURCE
macro redefined compilation error, from Stanislav Fomichev.
2) Fix a wrong test in the ASSERT_OK() check in uprobe_syscall BPF selftest,
from Jiri Olsa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/selftests: Fix ASSERT_OK condition check in uprobe_syscall test
selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp
====================
Link: https://patch.msgid.link/20240731115706.19677-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a buffer is evicted for memory pressure or TTM evict all,
the placement is set to the eviction domain, this means the
buffer never gets revalidated on the next exec to the correct domain.
I think this should be fine to use the initial domain from the
object creation, as least with VM_BIND this won't change after
init so this should be the correct answer.
Fixes: b88baab828 ("drm/nouveau: implement new VM_BIND uAPI")
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240515025542.2156774-1-airlied@gmail.com
ip6table_nat_table_init() accesses net->gen->ptr[ip6table_nat_net_ops.id],
but the function is exposed to user space before the entry is allocated
via register_pernet_subsys().
Let's call register_pernet_subsys() before xt_register_template().
Fixes: fdacd57c79 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit in Fixes was added as a catch-all for cases where the cmdline is
parsed before being merged with the builtin one.
And promptly one issue appeared, see Link below. The microcode loader
really needs to parse it that early, but the merging happens later.
Reshuffling the early boot nightmare^W code to handle that properly would
be a painful exercise for another day so do the chicken thing and parse the
builtin cmdline too before it has been merged.
Fixes: 0c40b1c7a8 ("x86/setup: Warn when option parsing is done too early")
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240730152108.GAZqkE5Dfi9AuKllRw@fat_crate.local
Link: https://lore.kernel.org/r/20240722152330.GCZp55ck8E_FT4kPnC@fat_crate.local
Allow userspace to use damage clips with atomic async flips. Damage
clips are useful for partial plane updates, which can be helpful for
clients that want to do flips asynchronously.
Fixes: 0e26cc72c7 ("drm: Refuse to async flip with atomic prop changes")
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702212215.109696-2-andrealmeid@igalia.com
Allow userspace to use explicit synchronization with atomic async flips.
That means that the flip will wait for some hardware fence, and then
will flip as soon as possible (async) in regard of the vblank.
Fixes: 0e26cc72c7 ("drm: Refuse to async flip with atomic prop changes")
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702212215.109696-1-andrealmeid@igalia.com
The Python finished() helper currently exits with KSFT_FAIL when there
are only passed and skipped tests. Fix the logic to exit with KSFT_PASS
instead, making it consistent with its C and bash counterparts
(ksft_finished() and ktap_finished() respectively).
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Fixes: dacf1d7a78 ("kselftest: Add test to verify probe of devices from discoverable buses")
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The recent regression report revealed that the use of WC pages for AMD
HDMI device together with AMD IOMMU leads to unexpected truncation or
noises. The issue seems triggered by the change in the kernel core
memory allocation that enables IOMMU driver to use always S/G
buffers. Meanwhile, the use of WC pages has been a workaround for the
similar issue with standard pages in the past. So, now we need to
apply the workaround conditionally, namely, only when IOMMU isn't in
place.
This patch modifies the workaround code to check the DMA ops at first
and apply the snoop-off only when needed.
Fixes: f5ff79fddf ("dma-mapping: remove CONFIG_DMA_REMAP")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219087
Link: https://patch.msgid.link/20240731170521.31714-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Laight pointed out that we should deal with the min3() and max3()
mess too, which still does excessive expansion.
And our current macros are actually rather broken.
In particular, the macros did this:
#define min3(x, y, z) min((typeof(x))min(x, y), z)
#define max3(x, y, z) max((typeof(x))max(x, y), z)
and that not only is a nested expansion of possibly very complex
arguments with all that involves, the typing with that "typeof()" cast
is completely wrong.
For example, imagine what happens in max3() if 'x' happens to be a
'unsigned char', but 'y' and 'z' are 'unsigned long'. The types are
compatible, and there's no warning - but the result is just random
garbage.
No, I don't think we've ever hit that issue in practice, but since we
now have sane infrastructure for doing this right, let's just use it.
It fixes any excessive expansion, and also avoids these kinds of broken
type issues.
Requested-by: David Laight <David.Laight@aculab.com>
Acked-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Linux-internal Xlinuxenvcfg ISA extension is omitted from the
riscv_isa_ext array because it has no DT binding and should not appear
in /proc/cpuinfo. The logic added in commit 625034abd5 ("riscv: add
ISA extensions validation callback") assumes all extensions are included
in riscv_isa_ext, and so riscv_resolve_isa() wrongly drops Xlinuxenvcfg
from the final ISA string. Instead, accept such Linux-internal ISA
extensions as if they have no validation callback.
Fixes: 625034abd5 ("riscv: add ISA extensions validation callback")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240718213011.2600150-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
