mirror of
https://github.com/torvalds/linux.git
synced 2024-09-20 23:13:00 +00:00
73d7cd542b
8160 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Andreas Hindborg
|
c462ecd659 |
null_blk: fix validation of block size
Block size should be between 512 and PAGE_SIZE and be a power of 2. The current check does not validate this, so update the check. Without this patch, null_blk would Oops due to a null pointer deref when loaded with bs=1536 [1]. Link: https://lore.kernel.org/all/87wmn8mocd.fsf@metaspace.dk/ Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20240603192645.977968-1-nmi@metaspace.dk [axboe: remove unnecessary braces and != 0 check] Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Damien Le Moal
|
b164316808 |
null_blk: Do not allow runt zone with zone capacity smaller then zone size
A zoned device with a smaller last zone together with a zone capacity smaller than the zone size does make any sense as that does not correspond to any possible setup for a real device: 1) For ZNS and zoned UFS devices, all zones are always the same size. 2) For SMR HDDs, all zones always have the same capacity. In other words, if we have a smaller last runt zone, then this zone capacity should always be equal to the zone size. Add a check in null_init_zoned_dev() to prevent a configuration to have both a smaller zone size and a zone capacity smaller than the zone size. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240530054035.491497-2-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Damien Le Moal
|
233e27b4d2 |
null_blk: Print correct max open zones limit in null_init_zoned_dev()
When changing the maximum number of open zones, print that number
instead of the total number of zones.
Fixes:
|
||
|
Damien Le Moal
|
d9ff882b54 |
null_blk: Fix return value of nullb_device_power_store()
When powering on a null_blk device that is not already on, the return
value ret that is initialized to be count is reused to check the return
value of null_add_dev(), leading to nullb_device_power_store() to return
null_add_dev() return value (0 on success) instead of "count".
So make sure to set ret to be equal to count when there are no errors.
Fixes:
|
||
Linus Torvalds
|
b4d88a60fe |
block-6.10-20240523
-----BEGIN PGP SIGNATURE-----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=Btam
-----END PGP SIGNATURE-----
Merge tag 'block-6.10-20240523' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
"Followup block updates, mostly due to NVMe being a bit late to the
party. But nothing major in there, so not a big deal.
In detail, this contains:
- NVMe pull request via Keith:
- Fabrics connection retries (Daniel, Hannes)
- Fabrics logging enhancements (Tokunori)
- RDMA delete optimization (Sagi)
- ublk DMA alignment fix (me)
- null_blk sparse warning fixes (Bart)
- Discard support for brd (Keith)
- blk-cgroup list corruption fixes (Ming)
- blk-cgroup stat propagation fix (Waiman)
- Regression fix for plugging stall with md (Yu)
- Misc fixes or cleanups (David, Jeff, Justin)"
* tag 'block-6.10-20240523' of git://git.kernel.dk/linux: (24 commits)
null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'
blk-throttle: remove unused struct 'avg_latency_bucket'
block: fix lost bio for plug enabled bio based device
block: t10-pi: add MODULE_DESCRIPTION()
blk-mq: add helper for checking if one CPU is mapped to specified hctx
blk-cgroup: Properly propagate the iostat update up the hierarchy
blk-cgroup: fix list corruption from reorder of WRITE ->lqueued
blk-cgroup: fix list corruption from resetting io stat
cdrom: rearrange last_media_change check to avoid unintentional overflow
nbd: Fix signal handling
nbd: Remove a local variable from nbd_send_cmd()
nbd: Improve the documentation of the locking assumptions
nbd: Remove superfluous casts
nbd: Use NULL to represent a pointer
brd: implement discard support
null_blk: Fix two sparse warnings
ublk_drv: set DMA alignment mask to 3
nvme-rdma, nvme-tcp: include max reconnects for reconnect logging
nvmet-rdma: Avoid o(n^2) loop in delete_ctrl
nvme: do not retry authentication failures
...
|
||
|
Linus Torvalds
|
d6a326d694 |
tracing: Remove second argument of __assign_str()
The __assign_str() macro logic of the TRACE_EVENT() macro was optimized so that it no longer needs the second argument. The __assign_str() is always matched with __string() field that takes a field name and the source for that field: __string(field, source) The TRACE_EVENT() macro logic will save off the source value and then use that value to copy into the ring buffer via the __assign_str(). Before commit |
||
|
Linus Torvalds
|
2ef32ad224 |
virtio: features, fixes, cleanups
Several new features here: - virtio-net is finally supported in vduse. - Virtio (balloon and mem) interaction with suspend is improved - vhost-scsi now handles signals better/faster. Fixes, cleanups all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmZN570PHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRp2JUH/1K3fZOHymop6Y5Z3USFS7YdlF+dniedY/vg TKyWERkXOlxq1d9DVxC0mN7tk72DweuWI0YJjLXofrEW1VuW29ecSbyFXxpeWJls b7ErffxDAFRas5jkMCngD8TuFnbEegU0mGP5kbiHpEndBydQ2hH99Gg0x7swW+cE xsvU5zonCCLwLGIP2DrVrn9qGOHtV6o8eZfVKDVXfvicn3lFBkUSxlwEYsO9RMup aKxV4FT2Pb1yBicwBK4TH1oeEXqEGy1YLEn+kAHRbgoC/5L0/LaiqrkzwzwwOIPj uPGkacf8CIbX0qZo5EzD8kvfcYL1xhU3eT9WBmpp2ZwD+4bINd4= =nax1 -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: "Several new features here: - virtio-net is finally supported in vduse - virtio (balloon and mem) interaction with suspend is improved - vhost-scsi now handles signals better/faster And fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits) virtio-pci: Check if is_avq is NULL virtio: delete vq in vp_find_vqs_msix() when request_irq() fails MAINTAINERS: add Eugenio Pérez as reviewer vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API vp_vdpa: don't allocate unused msix vectors sound: virtio: drop owner assignment fuse: virtio: drop owner assignment scsi: virtio: drop owner assignment rpmsg: virtio: drop owner assignment nvdimm: virtio_pmem: drop owner assignment wifi: mac80211_hwsim: drop owner assignment vsock/virtio: drop owner assignment net: 9p: virtio: drop owner assignment net: virtio: drop owner assignment net: caif: virtio: drop owner assignment misc: nsm: drop owner assignment iommu: virtio: drop owner assignment drm/virtio: drop owner assignment gpio: virtio: drop owner assignment firmware: arm_scmi: virtio: drop owner assignment ... |
||
Yu Kuai
|
a2db328b08 |
null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'
Writing 'power' and 'submit_queues' concurrently will trigger kernel
panic:
Test script:
modprobe null_blk nr_devices=0
mkdir -p /sys/kernel/config/nullb/nullb0
while true; do echo 1 > submit_queues; echo 4 > submit_queues; done &
while true; do echo 1 > power; echo 0 > power; done
Test result:
BUG: kernel NULL pointer dereference, address: 0000000000000148
Oops: 0000 [#1] PREEMPT SMP
RIP: 0010:__lock_acquire+0x41d/0x28f0
Call Trace:
<TASK>
lock_acquire+0x121/0x450
down_write+0x5f/0x1d0
simple_recursive_removal+0x12f/0x5c0
blk_mq_debugfs_unregister_hctxs+0x7c/0x100
blk_mq_update_nr_hw_queues+0x4a3/0x720
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_submit_queues_store+0x79/0xf0 [null_blk]
configfs_write_iter+0x119/0x1e0
vfs_write+0x326/0x730
ksys_write+0x74/0x150
This is because del_gendisk() can concurrent with
blk_mq_update_nr_hw_queues():
nullb_device_power_store nullb_apply_submit_queues
null_del_dev
del_gendisk
nullb_update_nr_hw_queues
if (!dev->nullb)
// still set while gendisk is deleted
return 0
blk_mq_update_nr_hw_queues
dev->nullb = NULL
Fix this problem by resuing the global mutex to protect
nullb_device_power_store() and nullb_update_nr_hw_queues() from configfs.
Fixes:
|
||
Steven Rostedt (Google)
|
2c92ca849f |
tracing/treewide: Remove second parameter of __assign_str()
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
|
||
Krzysztof Kozlowski
|
bdb8e2f8e8 |
virtio_blk: drop owner assignment
virtio core already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-Id: <20240331-module-owner-virtio-v2-6-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> |
||
|
Linus Torvalds
|
b6394d6f71 |
Assorted commits that had missed the last merge window...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkzp/gAKCRBZ7Krx/gZQ
63KFAQCsKv3XdcF+2BO+QuwPvR6eAvDxFjrFEcQFyyOXgFVLaAD/UMM0HcEFWxBb
PCPvyKVP22wF9PbodkrKJn8DRdtRZwM=
=jvWv
-----END PGP SIGNATURE-----
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted commits that had missed the last merge window..."
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove call_{read,write}_iter() functions
do_dentry_open(): kill inode argument
kernel_file_open(): get rid of inode argument
get_file_rcu(): no need to check for NULL separately
fd_is_open(): move to fs/file.c
close_on_exec(): pass files_struct instead of fdtable
|
||
|
Linus Torvalds
|
5ad8b6ad9a |
getting rid of bogus set_blocksize() uses, switching it
to struct file * and verifying that caller has device opened exclusively. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZkwkfQAKCRBZ7Krx/gZQ 62C3AQDW5vuXNx2+KDPma5YStjFpPLC0xtSyAS5D3YANjtyRFgD/TOcCarq7rvBt KubxHVFsfW+eu6ASeaoMRB83w5OIzwk= =Liix -----END PGP SIGNATURE----- Merge tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs blocksize updates from Al Viro: "This gets rid of bogus set_blocksize() uses, switches it over to be based on a 'struct file *' and verifies that the caller has the device opened exclusively" * tag 'pull-set_blocksize' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: make set_blocksize() fail unless block device is opened exclusive set_blocksize(): switch to passing struct file * btrfs_get_bdev_and_sb(): call set_blocksize() only for exclusive opens swsusp: don't bother with setting block size zram: don't bother with reopening - just use O_EXCL for open swapon(2): open swap with O_EXCL swapon(2)/swapoff(2): don't bother with block size pktcdvd: sort set_blocksize() calls out bcache_register(): don't bother with set_blocksize() |
||
|
Linus Torvalds
|
61307b7be4 |
The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
||
Bart Van Assche
|
e56d4b633f |
nbd: Fix signal handling
Both nbd_send_cmd() and nbd_handle_cmd() return either a negative error
number or a positive blk_status_t value. nbd_queue_rq() converts these
return values into a blk_status_t value. There is a bug in the conversion
code: if nbd_send_cmd() returns BLK_STS_RESOURCE, nbd_queue_rq() should
return BLK_STS_RESOURCE instead of BLK_STS_OK. Fix this, move the
conversion code into nbd_handle_cmd() and fix the remaining sparse warnings.
This patch fixes the following sparse warnings:
drivers/block/nbd.c:673:32: warning: incorrect type in return expression (different base types)
drivers/block/nbd.c:673:32: expected int
drivers/block/nbd.c:673:32: got restricted blk_status_t [usertype]
drivers/block/nbd.c:714:48: warning: incorrect type in return expression (different base types)
drivers/block/nbd.c:714:48: expected int
drivers/block/nbd.c:714:48: got restricted blk_status_t [usertype]
drivers/block/nbd.c:1120:21: warning: incorrect type in assignment (different base types)
drivers/block/nbd.c:1120:21: expected int [assigned] ret
drivers/block/nbd.c:1120:21: got restricted blk_status_t [usertype]
drivers/block/nbd.c:1125:16: warning: incorrect type in return expression (different base types)
drivers/block/nbd.c:1125:16: expected restricted blk_status_t
drivers/block/nbd.c:1125:16: got int [assigned] ret
Cc: Christoph Hellwig <hch@lst.de>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Fixes:
|
||
|
Bart Van Assche
|
f6cb9a2c3d |
nbd: Remove a local variable from nbd_send_cmd()
blk_rq_bytes() returns an unsigned int while 'size' has type unsigned long. This is confusing. Improve code readability by removing the local variable 'size'. Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240510202313.25209-5-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Bart Van Assche
|
2a6751e052 |
nbd: Improve the documentation of the locking assumptions
Document locking assumptions with lockdep_assert_held() instead of source code comments. The advantage of lockdep_assert_held() is that it is verified at runtime if lockdep is enabled in the kernel config. Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240510202313.25209-4-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Bart Van Assche
|
40639e9a0f |
nbd: Remove superfluous casts
In Linux kernel code it is preferred not to use a cast when converting a void pointer to another pointer type. Cc: Christoph Hellwig <hch@lst.de> Cc: Josef Bacik <jbacik@fb.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240510202313.25209-3-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Keith Busch
|
9ead7efc6f |
brd: implement discard support
The ramdisk memory utilization can only go up when data is written to new pages. Implement discard to provide the possibility to reduce memory usage for pages no longer in use. Aligned discards will free the associated pages, if any, and determinisitically return zeroed data until written again. Signed-off-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20240429102308.147627-1-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Bart Van Assche
|
25260555b1 |
null_blk: Fix two sparse warnings
Fix the following sparse warnings: drivers/block/null_blk/main.c:1243:35: warning: incorrect type in return expression (different base types) drivers/block/null_blk/main.c:1243:35: expected int drivers/block/null_blk/main.c:1243:35: got restricted blk_status_t drivers/block/null_blk/main.c:1291:30: warning: incorrect type in return expression (different base types) drivers/block/null_blk/main.c:1291:30: expected restricted blk_status_t drivers/block/null_blk/main.c:1291:30: got int Cc: Christoph Hellwig <hch@lst.de> Cc: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240510201816.24921-1-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Jens Axboe
|
928b607d1a |
ublk_drv: set DMA alignment mask to 3
By default, this will be 511, as that's the block layer default. But drivers these days can support memory alignments that aren't tied to the sector sizes, instead just being limited by what the DMA engine supports. An example is NVMe, where it's generally set to a 32-bit or 64-bit boundary. As ublk itself doesn't really care, just set it low enough that we don't run into issues with NVMe where the required O_DIRECT memory alignment is now more restrictive on ublk than it is on the underlying device. This was triggered by spurious -EINVAL returns on O_DIRECT IO on a setup with ublk managing NVMe devices, which previously worked just fine on the NVMe device itself. With the alignment relaxed, the test works fine. Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
0c9f4ac808 |
for-6.10/block-20240511
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmY/YgsQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpvi0EACwnFRtYioizBH0x7QUHTBcIr0IhACd5gfz bm+uwlDUtf6G6lupHdJT9gOVB2z2z1m2Pz//8RuUVWw3Eqw2+rfgG8iJd+yo7IaV DpX3WaM4NnBvB7FKOKHlMPvGuf7KgbZ3uPm3x8cbrn/axMmkZ6ljxTixJ3p5t4+s xRsef/lVdG71DkXIFgTKATB86yNRJNlRQTbL+sZW22vdXdtfyBbOgR1sBuFfp7Hd g/uocZM/z0ahM6JH/5R2IX2ttKXMIBZLA8HRkJdvYqg022cj4js2YyRCPU3N6jQN MtN4TpJV5I++8l6SPQOOhaDNrK/6zFtDQpwG0YBiKKj3nQDgVbWWb8ejYTIUv4MP SrEto4MVBEqg5N65VwYYhIf45rmueFyJp6z0Vqv6Owur5nuww/YIFknmoMa/WDMd V8dIU3zL72FZDbPjIBjxHeqAGz9OgzEVafled7pi0Xbw6wqiB4kZihlMGXlD+WBy Yd6xo8PX4i5+d2LLKKPxpW1X0eJlKYJ/4dnYCoFN8LmXSiPJnMx2pYrV+NqMxy4X Thr8lxswLQC7j9YBBuIeDl8NB9N5FZZLvaC6I25QKq045M2ckJ+VrounsQb3vGwJ 72nlxxBZL8wz3sasgX9Pc1Cez9AqYbM+UZahq8ezPY5y3Jh0QfRw/MOk1ZaDNC8V CNOHBH0E+Q== =HnjE -----END PGP SIGNATURE----- Merge tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux Pull block updates from Jens Axboe: - Add a partscan attribute in sysfs, fixing an issue with systemd relying on an internal interface that went away. - Attempt #2 at making long running discards interruptible. The previous attempt went into 6.9, but we ended up mostly reverting it as it had issues. - Remove old ida_simple API in bcache - Support for zoned write plugging, greatly improving the performance on zoned devices. - Remove the old throttle low interface, which has been experimental since 2017 and never made it beyond that and isn't being used. - Remove page->index debugging checks in brd, as it hasn't caught anything and prepares us for removing in struct page. - MD pull request from Song - Don't schedule block workers on isolated CPUs * tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits) blk-throttle: delay initialization until configuration blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW block: fix that util can be greater than 100% block: support to account io_ticks precisely block: add plug while submitting IO bcache: fix variable length array abuse in btree_iter bcache: Remove usage of the deprecated ida_simple_xx() API md: Revert "md: Fix overflow in is_mddev_idle" blk-lib: check for kill signal in ioctl BLKDISCARD block: add a bio_await_chain helper block: add a blk_alloc_discard_bio helper block: add a bio_chain_and_submit helper block: move discard checks into the ioctl handler block: remove the discard_granularity check in __blkdev_issue_discard block/ioctl: prefer different overflow check null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION() block: fix and simplify blkdevparts= cmdline parsing block: refine the EOF check in blkdev_iomap_begin block: add a partscan sysfs attribute for disks block: add a disk_has_partscan helper ... |
||
Zhu Yanjun
|
9e6727f824 |
null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
No functional changes intended.
Fixes:
|
||
Al Viro
|
ead083aeee |
set_blocksize(): switch to passing struct file *
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Al Viro
|
ebb0173df2 |
zram: don't bother with reopening - just use O_EXCL for open
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Al Viro
|
3a52c03d1e |
pktcdvd: sort set_blocksize() calls out
1) it doesn't make any sense to have ->open() call set_blocksize() on the device being opened - the caller will override that anyway. 2) setting block size on underlying device, OTOH, ought to be done when we are opening it exclusive - i.e. as part of pkt_open_dev(). Having it done at setup time doesn't guarantee us anything about the state at the time we start talking to it. Worse, if you happen to have the underlying device containing e.g. ext2 with 4Kb blocks that is currently mounted r/o, that set_blocksize() will confuse the hell out of filesystem. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
Uday Shankar
|
eaf4a9b19b |
ublk: remove segment count and size limits
ublk_drv currently creates block devices with the default max_segments and max_segment_size limits of BLK_MAX_SEGMENTS (128) and BLK_MAX_SEGMENT_SIZE (65536) respectively. These defaults can artificially constrain the I/O size seen by the ublk server - for example, suppose that the ublk server has configured itself to accept I/Os up to 1M and the application is also issuing 1M sized I/Os. If the I/O buffer used by the application is backed by 4K pages, the buffer could consist of up to 1M / 4K = 256 physically discontiguous segments (even if the buffer is virtually contiguous). As such, the I/O could exceed the default max_segments limit and get split. This can cause unnecessary performance issues if the ublk server is optimized to handle 1M I/Os. The block layer's segment count/size limits exist to model hardware constraints which don't exist in ublk_drv's case, so just remove those limits for the block devices created by ublk_drv. Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Riley Thomasson <riley@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20240430211623.2802036-1-ushankar@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Sergey Senozhatsky
|
34efe1c3b6 |
zram: add max_pages param to recompression
Introduce "max_pages" param to recompress device attribute which sets an upper limit on the number of entries (pages) zram attempts to recompress (in this particular recompression call). S/W recompression can be quite expensive so limiting the number of pages recompress touches can be quite helpful. Link: https://lkml.kernel.org/r/20240329094050.2815699-1-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Brian Geffon <bgeffon@google.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Zhu Yanjun
|
07d1b99825 |
null_blk: Fix missing mutex_destroy() at module removal
When a mutex lock is not used any more, the function mutex_destroy
should be called to mark the mutex lock uninitialized.
Fixes:
|
||
|
Damien Le Moal
|
e994ff5b55 |
null_blk: Simplify null_zone_write()
In null_zone_write, we do not need to first check if the target zone condition is FULL, READONLY or OFFLINE: for theses conditions, the check of the command sector against the zone write pointer will always result in the command failing. Remove these checks. We still however need to check that the target zone write pointer is not invalid for zone append operations. To do so, add the macro NULL_ZONE_INVALID_WP and use it in null_set_zone_cond() when changing a zone to READONLY or OFFLINE condition. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20240411085502.728558-4-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Damien Le Moal
|
3bdde0701e |
null_blk: Do zone resource management only if necessary
For zoned null_blk devices setup without any limit on the maximum number of open and active zones, there is no need to count the number of zones that are implicitly open, explicitly open and closed. This is indicated by the boolean field need_zone_res_mgmt of sturct nullb_device. Modify the zone management functions null_reset_zone(), null_finish_zone(), null_open_zone() and null_close_zone() to manage the zone condition counters only if the device need_zone_res_mgmt field is true. With this change, the function __null_close_zone() is removed and integrated into the 2 caller sites directly, with the null_close_imp_open_zone() call site greatly simplified as this function closes zones that are known to be in the implicit open condition. null_zone_write() is modified in a similar manner to do zone condition accouting only when the device need_zone_res_mgmt field is true. With these changes, the inline helpers null_lock_zone_res() and null_unlock_zone_res() are removed and replaced with direct calls to spin_lock()/spin_unlock(). Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20240411085502.728558-3-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Damien Le Moal
|
cb9e5273f6 |
null_blk: Have all null_handle_xxx() return a blk_status_t
Modify the null_handle_flush() and null_handle_rq() functions to return a blk_status_t instead of an errno to simplify the call sites of these functions and to be consistant with other null_handle_xxx() functions. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20240411085502.728558-2-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Damien Le Moal
|
9b3c08b90f |
block: Simplify blk_revalidate_disk_zones() interface
The only user of blk_revalidate_disk_zones() second argument was the SCSI disk driver (sd). Now that this driver does not require this update_driver_data argument, remove it to simplify the interface of blk_revalidate_disk_zones(). Also update the function kdoc comment to be more accurate (i.e. there is no gendisk ->revalidate method). Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240408014128.205141-21-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Damien Le Moal
|
f4f84586c8 |
null_blk: Introduce fua attribute
Add the fua configfs attribute and module parameter to allow configuring if the device supports FUA or not. Using this attribute has an effect on the null_blk device only if memory backing is enabled together with a write cache (cache_size option). This new attribute allows configuring a null_blk device with a write cache but without FUA support. This is convenient to test the block layer flush machinery. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240408014128.205141-18-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Damien Le Moal
|
997a1f08b4 |
null_blk: Introduce zone_append_max_sectors attribute
Add the zone_append_max_sectors configfs attribute and module parameter to allow configuring the maximum number of 512B sectors of zone append operations. This attribute is meaningful only for zoned null block devices. If not specified, the default is unchanged and the zoned device max append sectors limit is set to the device max sectors limit. If a non 0 value is used for this attribute, which is the default, then native support for zone append operations is enabled. Setting a 0 value disables native zone append operations support to instead use the block layer emulation. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240408014128.205141-17-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Damien Le Moal
|
b66f79b706 |
null_blk: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature
With zone write plugging enabled at the block layer level, a zoned device can only ever see at most a single write operation per zone. There is thus no need to request a block scheduler with strick per-zone sequential write ordering control through the ELEVATOR_F_ZBD_SEQ_WRITE feature. Removing this allows using a zoned null_blk device with any scheduler, including "none". Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240408014128.205141-16-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Damien Le Moal
|
11be0cb5fe |
ublk_drv: Do not request ELEVATOR_F_ZBD_SEQ_WRITE elevator feature
With zone write plugging enabled at the block layer level, any zone device can only ever see at most a single write operation per zone. There is thus no need to request a block scheduler with strick per-zone sequential write ordering control through the ELEVATOR_F_ZBD_SEQ_WRITE feature. Removing this allows using a zoned ublk device with any scheduler, including "none". Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Hans Holmberg <hans.holmberg@wdc.com> Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20240408014128.205141-15-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Miklos Szeredi
|
7c98f7cb8f |
remove call_{read,write}_iter() functions
These have no clear purpose. This is effectively a revert of commit |
||
|
Damien Le Moal
|
fbbd5d3ad9 |
nullblk: Fix cleanup order in null_add_dev() error path
In null_add_dev(), if an error happen after initializing the resources
for a zoned null block device, we must free these resources before
exiting the function. To ensure this, move the out_cleanup_zone label
after out_cleanup_disk as we jump to this latter label if an error
happens after calling null_init_zoned_dev().
Fixes:
|
||
Matthew Wilcox (Oracle)
|
7d8d35791b |
brd: Remove use of page->index
This debugging check will become more costly in the future when we shrink struct page. It has not proven to be useful, so simply remove it. This lets us use __xa_insert instead of __xa_cmpxchg() as we no longer need to know about the page that is currently stored in the XArray. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20240315181212.2573753-1-willy@infradead.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
e3111d9c3f |
block-6.9-20240322
-----BEGIN PGP SIGNATURE-----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=vcLT
-----END PGP SIGNATURE-----
Merge tag 'block-6.9-20240322' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Make an informative message less ominous (Keith)
- Enhanced trace decoding (Guixin)
- TCP updates (Hannes, Li)
- Fabrics connect deadlock fix (Chunguang)
- Platform API migration update (Uwe)
- A new device quirk (Jiawei)
- Remove dead assignment in fd (Yufeng)
* tag 'block-6.9-20240322' of git://git.kernel.dk/linux:
nvmet-rdma: remove NVMET_RDMA_REQ_INVALIDATE_RKEY flag
nvme: remove redundant BUILD_BUG_ON check
floppy: remove duplicated code in redo_fd_request()
nvme/tcp: Add wq_unbound modparam for nvme_tcp_wq
nvme-tcp: Export the nvme_tcp_wq to sysfs
drivers/nvme: Add quirks for device 126f:2262
nvme: parse format command's lbafu when tracing
nvme: add tracing of reservation commands
nvme: parse zns command's zsa and zrasf to string
nvme: use nvme_disk_is_ns_head helper
nvme: fix reconnection fail due to reserved tag allocation
nvmet: add tracing of zns commands
nvmet: add tracing of authentication commands
nvme-apple: Convert to platform remove callback returning void
nvmet-tcp: do not continue for invalid icreq
nvme: change shutdown timeout setting message
|
||
Yufeng Wang
|
50171b8667 |
floppy: remove duplicated code in redo_fd_request()
duplicated code in redo_fd_request(), unlock_fdc() function has the same code "do_floppy = NULL" inside. Signed-off-by: Yufeng Wang <wangyufeng@kylinos.cn> Suggested-by: Denis Efremov <efremov@linux.com> Link: https://lore.kernel.org/r/20240319014219.7812-1-wangyufeng@kylinos.cn Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
e5eb28f6d1 |
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations". - Kuan-Wei Chiu has also sped up the library sorting code in the series "lib/sort: Optimize the number of swaps and comparisons". - Alexey Gladkov has added the ability for code running within an IPC namespace to alter its IPC and MQ limits. The series is "Allow to change ipc/mq sysctls inside ipc namespace". - Geert Uytterhoeven has contributed some dhrystone maintenance work in the series "lib: dhry: miscellaneous cleanups". - Ryusuke Konishi continues nilfs2 maintenance work in the series "nilfs2: eliminate kmap and kmap_atomic calls" "nilfs2: fix kernel bug at submit_bh_wbc()" - Nathan Chancellor has updated our build tools requirements in the series "Bump the minimum supported version of LLVM to 13.0.1". - Muhammad Usama Anjum continues with the selftests maintenance work in the series "selftests/mm: Improve run_vmtests.sh". - Oleg Nesterov has done some maintenance work against the signal code in the series "get_signal: minor cleanups and fix". Plus the usual shower of singleton patches in various parts of the tree. Please see the individual changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfMnvgAKCRDdBJ7gKXxA jjKMAP4/Upq07D4wjkMVPb+QrkipbbLpdcgJ++q3z6rba4zhPQD+M3SFriIJk/Xh tKVmvihFxfAhdDthseXcIf1nBjMALwY= =8rVc -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min heap optimizations". - Kuan-Wei Chiu has also sped up the library sorting code in the series "lib/sort: Optimize the number of swaps and comparisons". - Alexey Gladkov has added the ability for code running within an IPC namespace to alter its IPC and MQ limits. The series is "Allow to change ipc/mq sysctls inside ipc namespace". - Geert Uytterhoeven has contributed some dhrystone maintenance work in the series "lib: dhry: miscellaneous cleanups". - Ryusuke Konishi continues nilfs2 maintenance work in the series "nilfs2: eliminate kmap and kmap_atomic calls" "nilfs2: fix kernel bug at submit_bh_wbc()" - Nathan Chancellor has updated our build tools requirements in the series "Bump the minimum supported version of LLVM to 13.0.1". - Muhammad Usama Anjum continues with the selftests maintenance work in the series "selftests/mm: Improve run_vmtests.sh". - Oleg Nesterov has done some maintenance work against the signal code in the series "get_signal: minor cleanups and fix". Plus the usual shower of singleton patches in various parts of the tree. Please see the individual changelogs for details. * tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) nilfs2: prevent kernel bug at submit_bh_wbc() nilfs2: fix failure to detect DAT corruption in btree and direct mappings ocfs2: enable ocfs2_listxattr for special files ocfs2: remove SLAB_MEM_SPREAD flag usage assoc_array: fix the return value in assoc_array_insert_mid_shortcut() buildid: use kmap_local_page() watchdog/core: remove sysctl handlers from public header nilfs2: use div64_ul() instead of do_div() mul_u64_u64_div_u64: increase precision by conditionally swapping a and b kexec: copy only happens before uchunk goes to zero get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig get_signal: don't abuse ksig->info.si_signo and ksig->sig const_structs.checkpatch: add device_type Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>" dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace() list: leverage list_is_head() for list_entry_is_head() nilfs2: MAINTAINERS: drop unreachable project mirror site smp: make __smp_processor_id() 0-argument macro fat: fix uninitialized field in nostale filehandles ... |
||
|
Linus Torvalds
|
902861e34c |
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is hotplugged
as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving policy
wherein we allocate memory across nodes in a weighted fashion rather
than uniformly. This is beneficial in heterogeneous memory environments
appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the process
has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown situations.
The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's series
"Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page faults.
He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction test",
Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
our handling of DAX on archiecctures which have virtually aliasing data
caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
improvements in worst-case mmap_lock hold times during certain
userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability improvements
in his series "Mitigate a vmap lock contention". It realizes a 12x
improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging of
large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages() to
an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which are
configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
=TG55
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
||
|
Linus Torvalds
|
1ddeeb2a05 |
for-6.9/block-20240310
-----BEGIN PGP SIGNATURE-----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=WlVL
-----END PGP SIGNATURE-----
Merge tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD pull requests via Song:
- Cleanup redundant checks (Yu Kuai)
- Remove deprecated headers (Marc Zyngier, Song Liu)
- Concurrency fixes (Li Lingfeng)
- Memory leak fix (Li Nan)
- Refactor raid1 read_balance (Yu Kuai, Paul Luse)
- Clean up and fix for md_ioctl (Li Nan)
- Other small fixes (Gui-Dong Han, Heming Zhao)
- MD atomic limits (Christoph)
- NVMe pull request via Keith:
- RDMA target enhancements (Max)
- Fabrics fixes (Max, Guixin, Hannes)
- Atomic queue_limits usage (Christoph)
- Const use for class_register (Ricardo)
- Identification error handling fixes (Shin'ichiro, Keith)
- Improvement and cleanup for cached request handling (Christoph)
- Moving towards atomic queue limits. Core changes and driver bits so
far (Christoph)
- Fix UAF issues in aoeblk (Chun-Yi)
- Zoned fix and cleanups (Damien)
- s390 dasd cleanups and fixes (Jan, Miroslav)
- Block issue timestamp caching (me)
- noio scope guarding for zoned IO (Johannes)
- block/nvme PI improvements (Kanchan)
- Ability to terminate long running discard loop (Keith)
- bdev revalidation fix (Li)
- Get rid of old nr_queues hack for kdump kernels (Ming)
- Support for async deletion of ublk (Ming)
- Improve IRQ bio recycling (Pavel)
- Factor in CPU capacity for remote vs local completion (Qais)
- Add shared_tags configfs entry for null_blk (Shin'ichiro
- Fix for a regression in page refcounts introduced by the folio
unification (Tony)
- Misc fixes and cleanups (Arnd, Colin, John, Kunwu, Li, Navid,
Ricardo, Roman, Tang, Uwe)
* tag 'for-6.9/block-20240310' of git://git.kernel.dk/linux: (221 commits)
block: partitions: only define function mac_fix_string for CONFIG_PPC_PMAC
block/swim: Convert to platform remove callback returning void
cdrom: gdrom: Convert to platform remove callback returning void
block: remove disk_stack_limits
md: remove mddev->queue
md: don't initialize queue limits
md/raid10: use the atomic queue limit update APIs
md/raid5: use the atomic queue limit update APIs
md/raid1: use the atomic queue limit update APIs
md/raid0: use the atomic queue limit update APIs
md: add queue limit helpers
md: add a mddev_is_dm helper
md: add a mddev_add_trace_msg helper
md: add a mddev_trace_remap helper
bcache: move calculation of stripe_size and io_opt into bcache_device_init
virtio_blk: Do not use disk_set_max_open/active_zones()
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
block: move capacity validation to blkpg_do_ioctl()
block: prevent division by zero in blk_rq_stat_sum()
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
...
|
||
|
Linus Torvalds
|
910202f00a |
vfs-6.9.super
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4DwAKCRCRxhvAZXjc
ooTRAQDRI6Qz6wJym5Yblta8BScMGbt/SgrdgkoCvT6y83MtqwD+Nv/AZQzi3A3l
9NdULtniW1reuCYkc8R7dYM8S+yAwAc=
=Y1qX
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
|
||
Uwe Kleine-König
|
d8d6608b76 |
block/swim: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/a00aea8201ea85ae726411bb0fb015ea026ff40a.1709886922.git.u.kleine-koenig@pengutronix.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Ahelenia Ziemiańska
|
6a57a21943 |
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
Found with git grep 'MODULE_AUTHOR(".*([^)]*@'
Fixed with
sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ </g;s/)"/>"/;s/)and/> and/}' \
$(git grep -l 'MODULE_AUTHOR(".*([^)]*@')
Also:
in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc";
this is what every other MODULE_AUTHOR for this company says,
and it's what the header says
in drivers/sbus/char/openprom.c normalise a double-spaced separator;
this is clearly copied from the copyright header,
where the names are aligned on consecutive lines thusly:
* Linux/SPARC PROM Configuration Driver
* Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
but the authorship branding is single-line
Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Damien Le Moal
|
0e46064ebe |
virtio_blk: Do not use disk_set_max_open/active_zones()
In virtblk_read_zoned_limits(), setting a zoned block device maximum
number of open and active zones using the functions
disk_set_max_open_zones() and disk_set_max_active_zones() is incorrect
as setting the limits for the request queue is now done atomically when
the gendisk is created (with blk_mq_alloc_disk()). The value set by the
disk_set_max_open/active_zones() functions will be overwritten.
Fix this by setting the maximum number of open and active zones directly
in the queue_limits structure passed to virtblk_read_zoned_limits().
Fixes:
|
||
Chun-Yi Lee
|
f98364e926 |
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
This patch is against CVE-2023-6270. The description of cve is:
A flaw was found in the ATA over Ethernet (AoE) driver in the Linux
kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on
`struct net_device`, and a use-after-free can be triggered by racing
between the free on the struct and the access through the `skbtxq`
global queue. This could lead to a denial of service condition or
potential code execution.
In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial
code is finished. But the net_device ifp will still be used in
later tx()->dev_queue_xmit() in kthread. Which means that the
dev_put(ifp) should NOT be called in the success path of skb
initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into
use-after-free because the net_device is freed.
This patch removed the dev_put(ifp) in the success path in
aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx().
Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes:
|
||
Christoph Hellwig
|
e6dfe748f0 |
drbd: atomically update queue limits in drbd_reconsider_queue_parameters
Switch drbd_reconsider_queue_parameters to set up the queue parameters in an on-stack queue_limits structure and apply the atomically. Remove various helpers that have become so trivial that they can be folded into drbd_reconsider_queue_parameters. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240305134041.137006-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |