When CONFIG_QUOTA is enabled, if we failed to mount the filesystem due
to some error happens behind ext4_orphan_cleanup(), it will end up
triggering a after free issue of super_block. The problem is that
ext4_orphan_cleanup() will set SB_ACTIVE flag if CONFIG_QUOTA is
enabled, after we cleanup the truncated inodes, the last iput() will put
them into the lru list, and these inodes' pages may probably dirty and
will be write back by the writeback thread, so it could be raced by
freeing super_block in the error path of mount_bdev().
After check the setting of SB_ACTIVE flag in ext4_orphan_cleanup(), it
was used to ensure updating the quota file properly, but evict inode and
trash data immediately in the last iput does not affect the quotafile,
so setting the SB_ACTIVE flag seems not required[1]. Fix this issue by
just remove the SB_ACTIVE setting.
[1] https://lore.kernel.org/linux-ext4/99cce8ca-e4a0-7301-840f-2ace67c551f3@huawei.com/T/#m04990cfbc4f44592421736b504afcc346b2a7c00
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210331033138.918975-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Block bitmap prefetching is needed for these allocator optimization
data structures to get populated and provide better group scanning
order. So, turn it on bu default. prefetch_block_bitmaps mount option
is now marked as removed and a new option no_prefetch_block_bitmaps is
added to disable block bitmap prefetching.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of traversing through groups linearly, scan groups in specific
orders at cr 0 and cr 1. At cr 0, we want to find groups that have the
largest free order >= the order of the request. So, with this patch,
we maintain lists for each possible order and insert each group into a
list based on the largest free order in its buddy bitmap. During cr 0
allocation, we traverse these lists in the increasing order of largest
free orders. This allows us to find a group with the best available cr
0 match in constant time. If nothing can be found, we fallback to cr 1
immediately.
At CR1, the story is slightly different. We want to traverse in the
order of increasing average fragment size. For CR1, we maintain a rb
tree of groupinfos which is sorted by average fragment size. Instead
of traversing linearly, at CR1, we traverse in the order of increasing
average fragment size, starting at the most optimal group. This brings
down cr 1 search complexity to log(num groups).
For cr >= 2, we just perform the linear search as before. Also, in
case of lock contention, we intermittently fallback to linear search
even in CR 0 and CR 1 cases. This allows us to proceed during the
allocation path even in case of high contention.
There is an opportunity to do optimization at CR2 too. That's because
at CR2 we only consider groups where bb_free counter (number of free
blocks) is greater than the request extent size. That's left as future
work.
All the changes introduced in this patch are protected under a new
mount option "mb_optimize_scan".
With this patchset, following experiment was performed:
Created a highly fragmented disk of size 65TB. The disk had no
contiguous 2M regions. Following command was run consecutively for 3
times:
time dd if=/dev/urandom of=file bs=2M count=10
Here are the results with and without cr 0/1 optimizations introduced
in this patch:
|---------+------------------------------+---------------------------|
| | Without CR 0/1 Optimizations | With CR 0/1 Optimizations |
|---------+------------------------------+---------------------------|
| 1st run | 5m1.871s | 2m47.642s |
| 2nd run | 2m28.390s | 0m0.611s |
| 3rd run | 2m26.530s | 0m1.255s |
|---------+------------------------------+---------------------------|
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
A few arrays in mballoc.c use the total number of valid orders as
their size. Currently, this value is set as "sb->s_blocksize_bits +
2". This makes code harder to read. So, instead add a new macro
MB_NUM_ORDERS(sb) to make the code more readable.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before this patch, the function parse_options() was returning
journal_devnum and journal_ioprio variables to the caller. This patch
generalizes that interface to allow parse_options to return any parsed
options to return back to the caller. In this patch series, it gets
used to capture the value of "mb_optimize_scan=%u" mount option.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
s_mb_buddies_generated gets used later in this patch series to
determine if the cr 0 and cr 1 optimziations should be performed or
not. Currently, s_mb_buddies_generated is protected under a
spin_lock. In the allocation path, it is better if we don't depend on
the lock and instead read the value atomically. In order to do that,
we drop s_bal_lock altogether and we convert the only two protected
fields by it s_mb_buddies_generated and s_mb_generation_time to atomic
type.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20210401172129.189766-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit <50122847007> ("ext4: fix check to prevent initializing reserved
inodes") check the block group zero and prevent initializing reserved
inodes. But in some special cases, the reserved inode may not all belong
to the group zero, it may exist into the second group if we format
filesystem below.
mkfs.ext4 -b 4096 -g 8192 -N 1024 -I 4096 /dev/sda
So, it will end up triggering a false positive report of a corrupted
file system. This patch fix it by avoid check reserved inodes if no free
inode blocks will be zeroed.
Cc: stable@kernel.org
Fixes: 5012284700 ("ext4: fix check to prevent initializing reserved inodes")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210331121516.2243099-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Matching names with casefolded encrypting directories requires
decrypting entries to confirm case since we are case preserving. We can
avoid needing to decrypt if our hash values don't match.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210319073414.1381041-3-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds support for encryption with casefolding.
Since the name on disk is case preserving, and also encrypted, we can no
longer just recompute the hash on the fly. Additionally, to avoid
leaking extra information from the hash of the unencrypted name, we use
siphash via an fscrypt v2 policy.
The hash is stored at the end of the directory entry for all entries
inside of an encrypted and casefolded directory apart from those that
deal with '.' and '..'. This way, the change is backwards compatible
with existing ext4 filesystems.
[ Changed to advertise this feature via the file:
/sys/fs/ext4/features/encrypted_casefold -- TYT ]
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210319073414.1381041-2-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmBXj1oACgkQ8vlZVpUN
gaNnAwgAqZJ0S/Hctexs+v+DNvuyMxsA84pB/9KYlK2zgbBOyK5Iftxjqxb9Sb6j
6XKQOIaP2EXYJ0MDWW/fDMUHatlJvXUp+A9kLTiOLMDaRXbobQzb5jlGg9ZB/pBj
TzISrR4widiqJbVT2RFpO9O7B75BQqlpqFNfkF/yJ9CU/ozAw9x+voPcZK7q8/Sh
+DeQCARvgfx1ZipHGTYKjJdujA0qGcDfboYJpgId/gA5Zi76tx4NlbeXAM2QmRfh
zAd1NzFhqf7JmKDAWDdUeRnrDHcje9FLcAxo7Quq7YWxRKFsOCz9LTxazL2UIoa2
HvGpMD23qmISCLUyyrfnrpGPj/mD2w==
=xcuH
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for v5.12"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: initialize ret to suppress smatch warning
ext4: stop inode update before return
ext4: fix rename whiteout with fast commit
ext4: fix timer use-after-free on failed mount
ext4: fix potential error in ext4_do_update_inode
ext4: do not try to set xattr into ea_inode if value is empty
ext4: do not iput inode under running transaction in ext4_rename()
ext4: find old entry again if failed to rename whiteout
ext4: fix error handling in ext4_end_enable_verity()
ext4: fix bh ref count on error paths
fs/ext4: fix integer overflow in s_log_groups_per_flex
ext4: add reclaim checks to xattr code
ext4: shrink race window in ext4_should_retry_alloc()
This patch adds rename whiteout support in fast commits. Note that the
whiteout object that gets created is actually char device. Which
imples, the function ext4_inode_journal_mode(struct inode *inode)
would return "JOURNAL_DATA" for this inode. This has a consequence in
fast commit code that it will make creation of the whiteout object a
fast-commit ineligible behavior and thus will fall back to full
commits. With this patch, this can be observed by running fast commits
with rename whiteout and seeing the stats generated by ext4_fc_stats
tracepoint as follows:
ext4_fc_stats: dev 254:32 fc ineligible reasons:
XATTR:0, CROSS_RENAME:0, JOURNAL_FLAG_CHANGE:0, NO_MEM:0, SWAP_BOOT:0,
RESIZE:0, RENAME_DIR:0, FALLOC_RANGE:0, INODE_JOURNAL_DATA:16;
num_commits:6, ineligible: 6, numblks: 3
So in short, this patch guarantees that in case of rename whiteout, we
fall back to full commits.
Amir mentioned that instead of creating a new whiteout object for
every rename, we can create a static whiteout object with irrelevant
nlink. That will make fast commits to not fall back to full
commit. But until this happens, this patch will ensure correctness by
falling back to full commits.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210316221921.1124955-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When filesystem mount fails because of corrupted filesystem we first
cancel the s_err_report timer reminding fs errors every day and only
then we flush s_error_work. However s_error_work may report another fs
error and re-arm timer thus resulting in timer use-after-free. Fix the
problem by first flushing the work and only after that canceling the
s_err_report timer.
Reported-by: syzbot+628472a2aac693ab0fcd@syzkaller.appspotmail.com
Fixes: 2d01ddc866 ("ext4: save error info to sb through journal if available")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210315165906.2175-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If set_large_file = 1 and errors occur in ext4_handle_dirty_metadata(),
the error code will be overridden, go to out_brelse to avoid this
situation.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Link: https://lore.kernel.org/r/20210312065051.36314-1-luoshijie1@huawei.com
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Syzbot report a warning that ext4 may create an empty ea_inode if set
an empty extent attribute to a file on the file system which is no free
blocks left.
WARNING: CPU: 6 PID: 10667 at fs/ext4/xattr.c:1640 ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
...
Call trace:
ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
ext4_xattr_block_set+0x1d0/0x1b1c fs/ext4/xattr.c:1942
ext4_xattr_set_handle+0x8a0/0xf1c fs/ext4/xattr.c:2390
ext4_xattr_set+0x120/0x1f0 fs/ext4/xattr.c:2491
ext4_xattr_trusted_set+0x48/0x5c fs/ext4/xattr_trusted.c:37
__vfs_setxattr+0x208/0x23c fs/xattr.c:177
...
Now, ext4 try to store extent attribute into an external inode if
ext4_xattr_block_set() return -ENOSPC, but for the case of store an
empty extent attribute, store the extent entry into the extent
attribute block is enough. A simple reproduce below.
fallocate test.img -l 1M
mkfs.ext4 -F -b 2048 -O ea_inode test.img
mount test.img /mnt
dd if=/dev/zero of=/mnt/foo bs=2048 count=500
setfattr -n "user.test" /mnt/foo
Reported-by: syzbot+98b881fdd8ebf45ab4ae@syzkaller.appspotmail.com
Fixes: 9c6e7853c5 ("ext4: reserve space for xattr entries/names")
Cc: stable@kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210305120508.298465-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into
directory, it ends up dropping new created whiteout inode under the
running transaction. After commit <9b88f9fb0d2> ("ext4: Do not iput inode
under running transaction"), we follow the assumptions that evict() does
not get called from a transaction context but in ext4_rename() it breaks
this suggestion. Although it's not a real problem, better to obey it, so
this patch add inode to orphan list and stop transaction before final
iput().
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we failed to add new entry on rename whiteout, we cannot reset the
old->de entry directly, because the old->de could have moved from under
us during make indexed dir. So find the old entry again before reset is
needed, otherwise it may corrupt the filesystem as below.
/dev/sda: Entry '00000001' in ??? (12) has deleted/unused inode 15. CLEARED.
/dev/sda: Unattached inode 75
/dev/sda: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
Fixes: 6b4b8e6b4a ("ext4: fix bug for rename with RENAME_WHITEOUT")
Cc: stable@vger.kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 didn't properly clean up if verity failed to be enabled on a file:
- It left verity metadata (pages past EOF) in the page cache, which
would be exposed to userspace if the file was later extended.
- It didn't truncate the verity metadata at all (either from cache or
from disk) if an error occurred while setting the verity bit.
Fix these bugs by adding a call to truncate_inode_pages() and ensuring
that we truncate the verity metadata (both from cache and from disk) in
all error paths. Also rework the code to cleanly separate the success
path from the error paths, which makes it much easier to understand.
Reported-by: Yunlei He <heyunlei@hihonor.com>
Fixes: c93d8f8858 ("ext4: add basic fs-verity support")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210302200420.137977-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ever since the addition of multipage bio_vecs BIO_MAX_PAGES has been
horribly confusingly misnamed. Rename it to BIO_MAX_VECS to stop
confusing users of the bio API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20210311110137.1132391-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot found UBSAN: shift-out-of-bounds in ext4_mb_init [1], when
1 << sbi->s_es->s_log_groups_per_flex is bigger than UINT_MAX,
where sbi->s_mb_prefetch is unsigned integer type.
32 is the maximum allowed power of s_log_groups_per_flex. Following if
check will also trigger UBSAN shift-out-of-bound:
if (1 << sbi->s_es->s_log_groups_per_flex >= UINT_MAX) {
So I'm checking it against the raw number, perhaps there is another way
to calculate UINT_MAX max power. Also use min_t as to make sure it's
uint type.
[1] UBSAN: shift-out-of-bounds in fs/ext4/mballoc.c:2713:24
shift exponent 60 is too large for 32-bit type 'int'
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x137/0x1be lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
ext4_mb_init_backend fs/ext4/mballoc.c:2713 [inline]
ext4_mb_init+0x19bc/0x19f0 fs/ext4/mballoc.c:2898
ext4_fill_super+0xc2ec/0xfbe0 fs/ext4/super.c:4983
Reported-by: syzbot+a8b4b0c60155e87e9484@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210224095800.3350002-1-snovitoll@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Syzbot is reporting that ext4 can enter fs reclaim from kvmalloc() while
the transaction is started like:
fs_reclaim_acquire+0x117/0x150 mm/page_alloc.c:4340
might_alloc include/linux/sched/mm.h:193 [inline]
slab_pre_alloc_hook mm/slab.h:493 [inline]
slab_alloc_node mm/slub.c:2817 [inline]
__kmalloc_node+0x5f/0x430 mm/slub.c:4015
kmalloc_node include/linux/slab.h:575 [inline]
kvmalloc_node+0x61/0xf0 mm/util.c:587
kvmalloc include/linux/mm.h:781 [inline]
ext4_xattr_inode_cache_find fs/ext4/xattr.c:1465 [inline]
ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1508 [inline]
ext4_xattr_set_entry+0x1ce6/0x3780 fs/ext4/xattr.c:1649
ext4_xattr_ibody_set+0x78/0x2b0 fs/ext4/xattr.c:2224
ext4_xattr_set_handle+0x8f4/0x13e0 fs/ext4/xattr.c:2380
ext4_xattr_set+0x13a/0x340 fs/ext4/xattr.c:2493
This should be impossible since transaction start sets PF_MEMALLOC_NOFS.
Add some assertions to the code to catch if something isn't working as
expected early.
Link: https://lore.kernel.org/linux-ext4/000000000000563a0205bafb7970@google.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210222171626.21884-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When generic/371 is run on kvm-xfstests using 5.10 and 5.11 kernels, it
fails at significant rates on the two test scenarios that disable
delayed allocation (ext3conv and data_journal) and force actual block
allocation for the fallocate and pwrite functions in the test. The
failure rate on 5.10 for both ext3conv and data_journal on one test
system typically runs about 85%. On 5.11, the failure rate on ext3conv
sometimes drops to as low as 1% while the rate on data_journal
increases to nearly 100%.
The observed failures are largely due to ext4_should_retry_alloc()
cutting off block allocation retries when s_mb_free_pending (used to
indicate that a transaction in progress will free blocks) is 0.
However, free space is usually available when this occurs during runs
of generic/371. It appears that a thread attempting to allocate
blocks is just missing transaction commits in other threads that
increase the free cluster count and reset s_mb_free_pending while
the allocating thread isn't running. Explicitly testing for free space
availability avoids this race.
The current code uses a post-increment operator in the conditional
expression that determines whether the retry limit has been exceeded.
This means that the conditional expression uses the value of the
retry counter before it's increased, resulting in an extra retry cycle.
The current code actually retries twice before hitting its retry limit
rather than once.
Increasing the retry limit to 3 from the current actual maximum retry
count of 2 in combination with the change described above reduces the
observed failure rate to less that 0.1% on both ext3conv and
data_journal with what should be limited impact on users sensitive to
the overhead caused by retries.
A per filesystem percpu counter exported via sysfs is added to allow
users or developers to track the number of times the retry limit is
exceeded without resorting to debugging methods. This should provide
some insight into worst case retry behavior.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20210218151132.19678-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=ccMs
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A few stragglers (and one due to me missing it originally), and fixes
for changes in this merge window mostly. In particular:
- blktrace cleanups (Chaitanya, Greg)
- Kill dead blk_pm_* functions (Bart)
- Fixes for the bio alloc changes (Christoph)
- Fix for the partition changes (Christoph, Ming)
- Fix for turning off iopoll with polled IO inflight (Jeffle)
- nbd disconnect fix (Josef)
- loop fsync error fix (Mauricio)
- kyber update depth fix (Yang)
- max_sectors alignment fix (Mikulas)
- Add bio_max_segs helper (Matthew)"
* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
block: Add bio_max_segs
blktrace: fix documentation for blk_fill_rw()
block: memory allocations in bounce_clone_bio must not fail
block: remove the gfp_mask argument to bounce_clone_bio
block: fix bounce_clone_bio for passthrough bios
block-crypto-fallback: use a bio_set for splitting bios
block: fix logging on capacity change
blk-settings: align max_sectors on "logical_block_size" boundary
block: reopen the device in blkdev_reread_part
block: don't skip empty device in in disk_uevent
blktrace: remove debugfs file dentries from struct blk_trace
nbd: handle device refs for DESTROY_ON_DISCONNECT properly
kyber: introduce kyber_depth_updated()
loop: fix I/O error on fsync() in detached loop devices
block: fix potential IO hang when turning off io_poll
block: get rid of the trace rq insert wrapper
blktrace: fix blk_rq_merge documentation
blktrace: fix blk_rq_issue documentation
blktrace: add blk_fill_rwbs documentation comment
block: remove superfluous param in blk_fill_rwbs()
...
It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the
sign to be the same. Introduce bio_max_segs() and change BIO_MAX_PAGES to
be unsigned to make it easier for the users.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cycle...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmA3qgEACgkQ8vlZVpUN
gaMHqwf+IGiMeyB3BnIbQZjcwgyxRYMMmod0tcGv4yK4bf85+rTZZMcPZm5Ioqwm
+XLnuRW+x3Do6lnzNZj9p+qnPNwX2YGupwGeAoT5puMDKl0J7HhvdqPcNi4WgucW
K+LCAxbPjVFUAkpD2gwgNgXej4Us1QP/93GGG8YhTd+jiYS7axrRbAlE+4SmCsye
83dEWpXSFDE0qXHoaPwLo26LMPySPjWM/UuiWD8ozQ+mcL0Doecw1tWJottSo+Ds
+cJtxiOPVPTFwZUJOt/qoxfPnALrqAeazS+3lGmqK5c3xbvsc9CiYqP15FUbQF08
eCDMo9bpqQdRs4WmaRSvBzV8v+/TXg==
=+amQ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Miscellaneous ext4 cleanups and bug fixes. Pretty boring this cycle..."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: add .kunitconfig fragment to enable ext4-specific tests
ext: EXT4_KUNIT_TESTS should depend on EXT4_FS instead of selecting it
ext4: reset retry counter when ext4_alloc_file_blocks() makes progress
ext4: fix potential htree index checksum corruption
ext4: factor out htree rep invariant check
ext4: Change list_for_each* to list_for_each_entry*
ext4: don't try to processed freed blocks until mballoc is initialized
ext4: use DEFINE_MUTEX() for mutex lock
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmAzoWUACgkQnJ2qBz9k
QNnFgQgAlng0JOzeCQvLpwweqFl0FCxYbOsZXC1xDyvfX3TiA6A6oiOR4tx3uhQN
cOQmJXaiMn4oCXjD1j6WZwGfy23yx0XchaoFK9jy2IqodaB/zUjkiWYYqt0G3XIX
ud35mxjLAGS12BCD0c+vHy2RMsUFl5ep+5aBHRHZJJhCcYbl7e5ctXZ3xB1Q0mgI
r639gD8JhH3ICdu9W0NaMvqOrVhJFNmhSGATKL/N96+oKub2x2ycYE4L2OXegxy3
mnFf26LjA8jt7K+KfHloTvkC6D4HVnnvKFvKiIbGKafiWhAE7q57ZO6BPCMajGue
3UHIhWGmwKXRU72+nW6N+089GbcO/g==
=1e+z
-----END PGP SIGNATURE-----
Merge tag 'lazytime_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull lazytime updates from Jan Kara:
"Cleanups of the lazytime handling in the writeback code making rules
for calling ->dirty_inode() filesystem handlers saner"
* tag 'lazytime_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext4: simplify i_state checks in __ext4_update_other_inode_time()
gfs2: don't worry about I_DIRTY_TIME in gfs2_fsync()
fs: improve comments for writeback_single_inode()
fs: drop redundant check from __writeback_single_inode()
fs: clean up __mark_inode_dirty() a bit
fs: pass only I_DIRTY_INODE flags to ->dirty_inode
fs: don't call ->dirty_inode for lazytime timestamp updates
fat: only specify I_DIRTY_TIME when needed in fat_update_time()
fs: only specify I_DIRTY_TIME when needed in generic_update_time()
fs: correctly document the inode dirty flags
-----BEGIN PGP SIGNATURE-----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=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
- Adjust the final parameter of iomap_dio_rw.
- Add a new flag to request that iomap directio writes return EAGAIN if
the write is not a pure overwrite within EOF; this will be used to
reduce lock contention with unaligned direct writes on XFS.
- Amend XFS' directio code to eliminate exclusive locking for unaligned
direct writes if the circumstances permit
-----BEGIN PGP SIGNATURE-----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=AR07
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.12-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"The big change in this cycle is some new code to make it possible for
XFS to try unaligned directio overwrites without taking locks. If the
block is fully written and within EOF (i.e. doesn't require any
further fs intervention) then we can let the unlocked write proceed.
If not, we fall back to synchronizing direct writes.
Summary:
- Adjust the final parameter of iomap_dio_rw.
- Add a new flag to request that iomap directio writes return EAGAIN
if the write is not a pure overwrite within EOF; this will be used
to reduce lock contention with unaligned direct writes on XFS.
- Amend XFS' directio code to eliminate exclusive locking for
unaligned direct writes if the circumstances permit"
* tag 'iomap-5.12-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: reduce exclusive locking on unaligned dio
xfs: split the unaligned DIO write code out
xfs: improve the reflink_bounce_dio_write tracepoint
xfs: simplify the read/write tracepoints
xfs: remove the buffered I/O fallback assert
xfs: cleanup the read/write helper naming
xfs: make xfs_file_aio_write_checks IOCB_NOWAIT-aware
xfs: factor out a xfs_ilock_iocb helper
iomap: add a IOMAP_DIO_OVERWRITE_ONLY flag
iomap: pass a flags argument to iomap_dio_rw
iomap: rename the flags variable in __iomap_dio_rw
As of [1], we no longer want EXT4_KUNIT_TESTS and others to `select`
their deps. This means it can get harder to get all the right things
selected as we gain more tests w/ more deps over time.
This patch (and [2]) proposes we store kunitconfig fragments in-tree to
represent sets of tests. (N.B. right now we only have one ext4 test).
There's still a discussion to be had about how to have a hierarchy of
these files (e.g. if one wanted to test all of fs/, not just fs/ext4).
But this fragment would likely be a leaf node and isn't blocked on
deciding if we want `import` statements and the like.
Usage
=====
Before [2] (on its way to being merged):
$ cp fs/ext4/.kunitconfig .kunit/
$ ./tools/testing/kunit/kunit.py run
After [2]:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig
".kunitconfig" vs "kunitconfig"
===============================
See also: commit 14ee5cfd45 ("kunit: Rename 'kunitconfig' to '.kunitconfig'").
* The bit about .gitignore exluding it by default is now a con, however.
* But there are a lot of directories with files that begin with "k" and
so this could cause some annoyance w/ tab completion*
* This is the name kunit.py expects right now, so some people are used
to .kunitconfig over "kunitconfig"
[1] https://lore.kernel.org/linux-ext4/20210122110234.2825685-1-geert@linux-m68k.org/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/commit/?h=kunit&id=243180f5924ed27ea417db39feb7f9691777688e
* 372/5556 directories isn't too much, but still not a small number:
$ find -type f -name 'k*' | xargs dirname | sort -u | wc -l
372
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Link: https://lore.kernel.org/r/20210210013206.136227-1-dlatypov@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
EXT4_KUNIT_TESTS selects EXT4_FS, thus enabling an optional feature the
user may not want to enable. Fix this by making the test depend on
EXT4_FS instead.
Fixes: 1cbeab1b24 ("ext4: add kunit test for decoding extended timestamps")
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210122110234.2825685-1-geert@linux-m68k.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Change the retry policy in ext4_alloc_file_blocks() to allow for a full
retry cycle whenever a portion of an allocation request has been
fulfilled. A large allocation request often results in multiple calls
to ext4_map_blocks(), each of which is potentially subject to a
temporary ENOSPC condition and retry cycle. The current code only
allows for a single retry cycle.
This patch does not address a known bug or reported complaint.
However, it should make block allocation for fallocate and zero range
more robust.
In addition, simplify the conditional controlling the allocation while
loop, where testing len alone is sufficient. Remove the assignment to
ret2 in the error path after the call to ext4_map_blocks() since its
value isn't subsequently used.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20210113221403.18258-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add an ioctl FS_IOC_READ_VERITY_METADATA which will allow reading verity
metadata from a file that has fs-verity enabled, including:
- The Merkle tree
- The fsverity_descriptor (not including the signature if present)
- The built-in signature, if present
This ioctl has similar semantics to pread(). It is passed the type of
metadata to read (one of the above three), and a buffer, offset, and
size. It returns the number of bytes read or an error.
Separate patches will add support for each of the above metadata types.
This patch just adds the ioctl itself.
This ioctl doesn't make any assumption about where the metadata is
stored on-disk. It does assume the metadata is in a stable format, but
that's basically already the case:
- The Merkle tree and fsverity_descriptor are defined by how fs-verity
file digests are computed; see the "File digest computation" section
of Documentation/filesystems/fsverity.rst. Technically, the way in
which the levels of the tree are ordered relative to each other wasn't
previously specified, but it's logical to put the root level first.
- The built-in signature is the value passed to FS_IOC_ENABLE_VERITY.
This ioctl is useful because it allows writing a server program that
takes a verity file and serves it to a client program, such that the
client can do its own fs-verity compatible verification of the file.
This only makes sense if the client doesn't trust the server and if the
server needs to provide the storage for the client.
More concretely, there is interest in using this ability in Android to
export APK files (which are protected by fs-verity) to "protected VMs".
This would use Protected KVM (https://lwn.net/Articles/836693), which
provides an isolated execution environment without having to trust the
traditional "host". A "guest" VM can boot from a signed image and
perform specific tasks in a minimum trusted environment using files that
have fs-verity enabled on the host, without trusting the host or
requiring that the guest has its own trusted storage.
Technically, it would be possible to duplicate the metadata and store it
in separate files for serving. However, that would be less efficient
and would require extra care in userspace to maintain file consistency.
In addition to the above, the ability to read the built-in signatures is
useful because it allows a system that is using the in-kernel signature
verification to migrate to userspace signature verification.
Link: https://lore.kernel.org/r/20210115181819.34732-4-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
In the case where we need to do an interior node split, and
immediately afterwards, we are unable to allocate a new directory leaf
block due to ENOSPC, the directory index checksum's will not be filled
in correctly (and indeed, will not be correctly journalled).
This looks like a bug that was introduced when we added largedir
support. The original code doesn't make any sense (and should have
been caught in code review), but it was hidden because most of the
time, the index node checksum will be set by do_split(). But if
do_split bails out due to ENOSPC, then ext4_handle_dirty_dx_node()
won't get called, and so the directory index checksum field will not
get set, leading to:
EXT4-fs error (device sdb): dx_probe:858: inode #6635543: block 4022: comm nfsd: Directory index failed checksum
Google-Bug-Id: 176345532
Fixes: e08ac99fa2 ("ext4: add largedir feature")
Cc: Artem Blagodarenko <artem.blagodarenko@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch moves some debugging code which is used to validate the
hash tree node when doing a binary search of an htree node into a
separate function, which is disabled by default (since it is only used
by developers when they are modifying the htree code paths).
In addition to cleaning up the code to make it more maintainable, it
silences a Clang compiler warning when -Wunreachable-code-aggressive
is enabled. (There is no plan to enable this warning by default, since
there it has far too many false positives; nevertheless, this commit
reduces one of the many false positives by one.)
Signed-off-by: Vinicius Tinti <viniciustinti@gmail.com>
Link: https://lore.kernel.org/r/20210202162837.129631-1-viniciustinti@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we try to make any changes via the journal between when the journal
is initialized, but before the multi-block allocated is initialized,
we will end up deferencing a NULL pointer when the journal commit
callback function calls ext4_process_freed_data().
The proximate cause of this failure was commit 2d01ddc866 ("ext4:
save error info to sb through journal if available") since file system
corruption problems detected before the call to ext4_mb_init() would
result in a journal commit before we aborted the mount of the file
system.... and we would then trigger the NULL pointer deref.
Link: https://lore.kernel.org/r/YAm8qH/0oo2ofSMR@mit.edu
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no point in allocating memory for a synchronous flush.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable idmapped mounts for ext4. All dedicated helpers we need for this
exist. So this basically just means we're passing down the
user_namespace argument from the VFS methods to the relevant helpers.
Let's create simple example where we idmap an ext4 filesystem:
root@f2-vm:~# truncate -s 5G ext4.img
root@f2-vm:~# mkfs.ext4 ./ext4.img
mke2fs 1.45.5 (07-Jan-2020)
Discarding device blocks: done
Creating filesystem with 1310720 4k blocks and 327680 inodes
Filesystem UUID: 3fd91794-c6ca-4b0f-9964-289a000919cf
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736
Allocating group tables: done
Writing inode tables: done
Creating journal (16384 blocks): done
Writing superblocks and filesystem accounting information: done
root@f2-vm:~# losetup -f --show ./ext4.img
/dev/loop0
root@f2-vm:~# mount /dev/loop0 /mnt
root@f2-vm:~# ls -al /mnt/
total 24
drwxr-xr-x 3 root root 4096 Oct 28 13:34 .
drwxr-xr-x 30 root root 4096 Oct 28 13:22 ..
drwx------ 2 root root 16384 Oct 28 13:34 lost+found
# Let's create an idmapped mount at /idmapped1 where we map uid and gid
# 0 to uid and gid 1000
root@f2-vm:/# ./mount-idmapped --map-mount b:0:1000:1 /mnt/ /idmapped1/
root@f2-vm:/# ls -al /idmapped1/
total 24
drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 13:34 .
drwxr-xr-x 30 root root 4096 Oct 28 13:22 ..
drwx------ 2 ubuntu ubuntu 16384 Oct 28 13:34 lost+found
# Let's create an idmapped mount at /idmapped2 where we map uid and gid
# 0 to uid and gid 2000
root@f2-vm:/# ./mount-idmapped --map-mount b:0:2000:1 /mnt/ /idmapped2/
root@f2-vm:/# ls -al /idmapped2/
total 24
drwxr-xr-x 3 2000 2000 4096 Oct 28 13:34 .
drwxr-xr-x 31 root root 4096 Oct 28 13:39 ..
drwx------ 2 2000 2000 16384 Oct 28 13:34 lost+found
Let's create another example where we idmap the rootfs filesystem
without a mapping for uid 0 and gid 0:
# Create an idmapped mount of for a full POSIX range of rootfs under
# /mnt but without a mapping for uid 0 to reduce attack surface
root@f2-vm:/# ./mount-idmapped --map-mount b:1:1:65536 / /mnt/
# Since we don't have a mapping for uid and gid 0 all files owned by
# uid and gid 0 should show up as uid and gid 65534:
root@f2-vm:/# ls -al /mnt/
total 664
drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 .
drwxr-xr-x 31 root root 4096 Oct 28 13:39 ..
lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 bin -> usr/bin
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 13:17 boot
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:48 dev
drwxr-xr-x 81 nobody nogroup 4096 Oct 28 04:00 etc
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 home
lrwxrwxrwx 1 nobody nogroup 7 Aug 25 07:44 lib -> usr/lib
lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib32 -> usr/lib32
lrwxrwxrwx 1 nobody nogroup 9 Aug 25 07:44 lib64 -> usr/lib64
lrwxrwxrwx 1 nobody nogroup 10 Aug 25 07:44 libx32 -> usr/libx32
drwx------ 2 nobody nogroup 16384 Aug 25 07:47 lost+found
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 media
drwxr-xr-x 31 nobody nogroup 4096 Oct 28 13:39 mnt
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 opt
drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 proc
drwx--x--x 6 nobody nogroup 4096 Oct 28 13:34 root
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:46 run
lrwxrwxrwx 1 nobody nogroup 8 Aug 25 07:44 sbin -> usr/sbin
drwxr-xr-x 2 nobody nogroup 4096 Aug 25 07:44 srv
drwxr-xr-x 2 nobody nogroup 4096 Apr 15 2020 sys
drwxrwxrwt 10 nobody nogroup 4096 Oct 28 13:19 tmp
drwxr-xr-x 14 nobody nogroup 4096 Oct 20 13:00 usr
drwxr-xr-x 12 nobody nogroup 4096 Aug 25 07:45 var
# Since we do have a mapping for uid and gid 1000 all files owned by
# uid and gid 1000 should simply show up as uid and gid 1000:
root@f2-vm:/# ls -al /mnt/home/ubuntu/
total 40
drwxr-xr-x 3 ubuntu ubuntu 4096 Oct 28 00:43 .
drwxr-xr-x 4 nobody nogroup 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 2936 Oct 28 12:26 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
Link: https://lore.kernel.org/r/20210121131959.646623-39-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-ext4@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The generic_fillattr() helper fills in the basic attributes associated
with an inode. Enable it to handle idmapped mounts. If the inode is
accessed through an idmapped mount map it into the mount's user
namespace before we store the uid and gid. If the initial user namespace
is passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The posix acl permission checking helpers determine whether a caller is
privileged over an inode according to the acls associated with the
inode. Add helpers that make it possible to handle acls on idmapped
mounts.
The vfs and the filesystems targeted by this first iteration make use of
posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to
translate basic posix access and default permissions such as the
ACL_USER and ACL_GROUP type according to the initial user namespace (or
the superblock's user namespace) to and from the caller's current user
namespace. Adapt these two helpers to handle idmapped mounts whereby we
either map from or into the mount's user namespace depending on in which
direction we're translating.
Similarly, cap_convert_nscap() is used by the vfs to translate user
namespace and non-user namespace aware filesystem capabilities from the
superblock's user namespace to the caller's user namespace. Enable it to
handle idmapped mounts by accounting for the mount's user namespace.
In addition the fileystems targeted in the first iteration of this patch
series make use of the posix_acl_chmod() and, posix_acl_update_mode()
helpers. Both helpers perform permission checks on the target inode. Let
them handle idmapped mounts. These two helpers are called when posix
acls are set by the respective filesystems to handle this case we extend
the ->set() method to take an additional user namespace argument to pass
the mount's user namespace down.
Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
