Commit Graph

118 Commits

Author SHA1 Message Date
Herbert Xu
3a01d0ee2b crypto: skcipher - Remove top-level givcipher interface
This patch removes the old crypto_grab_skcipher helper and replaces
it with crypto_grab_skcipher2.

As this is the final entry point into givcipher this patch also
removes all traces of the top-level givcipher interface, including
all implicit IV generators such as chainiv.

The bottom-level givcipher interface remains until the drivers
using it are converted.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-18 17:35:46 +08:00
Salvatore Benedetto
3c4b23901a crypto: ecdh - Add ECDH software support
* Implement ECDH under kpp API
 * Provide ECC software support for curve P-192 and
   P-256.
 * Add kpp test for ECDH with data generated by OpenSSL

Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23 18:29:57 +08:00
Salvatore Benedetto
802c7f1c84 crypto: dh - Add DH software implementation
* Implement MPI based Diffie-Hellman under kpp API
 * Test provided uses data generad by OpenSSL

Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23 18:29:56 +08:00
Salvatore Benedetto
4e5f2c4007 crypto: kpp - Key-agreement Protocol Primitives API (KPP)
Add key-agreement protocol primitives (kpp) API which allows to
implement primitives required by protocols such as DH and ECDH.
The API is composed mainly by the following functions
 * set_secret() - It allows the user to set his secret, also
   referred to as his private key, along with the parameters
   known to both parties involved in the key-agreement session.
 * generate_public_key() - It generates the public key to be sent to
   the other counterpart involved in the key-agreement session. The
   function has to be called after set_params() and set_secret()
 * generate_secret() - It generates the shared secret for the session

Other functions such as init() and exit() are provided for allowing
cryptographic hardware to be inizialized properly before use

Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-23 18:29:56 +08:00
Jeff Garzik
53964b9ee6 crypto: sha3 - Add SHA-3 hash algorithm
This patch adds the implementation of SHA3 algorithm
in software and it's based on original implementation
pushed in patch https://lwn.net/Articles/518415/ with
additional changes to match the padding rules specified
in SHA-3 specification.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-06-20 19:25:01 +08:00
Baolin Wang
735d37b542 crypto: engine - Introduce the block request crypto engine framework
Now block cipher engines need to implement and maintain their own queue/thread
for processing requests, moreover currently helpers provided for only the queue
itself (in crypto_enqueue_request() and crypto_dequeue_request()) but they
don't help with the mechanics of driving the hardware (things like running the
request immediately, DMA map it or providing a thread to process the queue in)
even though a lot of that code really shouldn't vary that much from device to
device.

Thus this patch provides a mechanism for pushing requests to the hardware
as it becomes free that drivers could use. And this framework is patterned
on the SPI code and has worked out well there.
(https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/
 drivers/spi/spi.c?id=ffbbdd21329f3e15eeca6df2d4bc11c04d9d91c0)

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-02-01 22:27:02 +08:00
Herbert Xu
a7c58ac062 crypto: crc32 - Rename generic implementation
The generic crc32 implementation is currently called crc32.  This
is a problem because it clashes with the lib implementation of crc32.

This patch renames the crypto crc32 to crc32_generic so that it is
consistent with crc32c.  An alias for the driver is also added.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-30 22:11:22 +08:00
Joonsoo Kim
110492183c crypto: compress - remove unused pcomp interface
It is unused now, so remove it.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-27 20:36:24 +08:00
Andrzej Zaborowski
3d5b1ecdea crypto: rsa - RSA padding algorithm
This patch adds PKCS#1 v1.5 standard RSA padding as a separate template.
This way an RSA cipher with padding can be obtained by instantiating
"pkcs1pad(rsa)".  The reason for adding this is that RSA is almost
never used without this padding (or OAEP) so it will be needed for
either certificate work in the kernel or the userspace, and I also hear
that it is likely implemented by hardware RSA in which case hardware
implementations of the whole of pkcs1pad(rsa) can be provided.

Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-12-09 20:03:57 +08:00
Stephan Mueller
1c49678e8a crypto: keywrap - enable compilation
Hook keywrap source code into Kconfig and Makefile

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-15 21:05:06 +08:00
Tadeusz Struk
22287b0b59 crypto: akcipher - Changes to asymmetric key API
Setkey function has been split into set_priv_key and set_pub_key.
Akcipher requests takes sgl for src and dst instead of void *.
Users of the API i.e. two existing RSA implementation and
test mgr code have been updated accordingly.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-10-14 22:23:16 +08:00
Herbert Xu
7a7ffe65c8 crypto: skcipher - Add top-level skcipher interface
This patch introduces the crypto skcipher interface which aims
to replace both blkcipher and ablkcipher.

It's very similar to the existing ablkcipher interface.  The
main difference is the removal of the givcrypt interface.  In
order to make the transition easier for blkcipher users, there
is a helper SKCIPHER_REQUEST_ON_STACK which can be used to place
a request on the stack for synchronous transforms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-21 22:21:19 +08:00
Herbert Xu
a26bcb0486 crypto: null - Use NULL2 in Makefile
The Kconfig option NULL2 has been added as CRYPTO_MANAGER now
depends indirectly on NULL2.  However, the Makefile was not updated
to use the new option, resulting in potential build failures when
only NULL2 is enabled.

Fixes: 149a39717d ("crypto: aead - Add type-safe geniv init/exit helpers")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 19:49:13 +08:00
Stephan Mueller
dfc9fa9193 crypto: jitterentropy - avoid compiler warnings
The core of the Jitter RNG is intended to be compiled with -O0. To
ensure that the Jitter RNG can be compiled on all architectures,
separate out the RNG core into a stand-alone C file that can be compiled
with -O0 which does not depend on any kernel include file.

As no kernel includes can be used in the C file implementing the core
RNG, any dependencies on kernel code must be extracted.

A second file provides the link to the kernel and the kernel crypto API
that can be compiled with the regular compile options of the kernel.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-25 23:18:32 +08:00
Tadeusz Struk
cfc2bb32b3 crypto: rsa - add a new rsa generic implementation
Add a new rsa generic SW implementation.
This implements only cryptographic primitives.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>

Added select on ASN1.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-17 17:03:53 +08:00
Tadeusz Struk
3c339ab83f crypto: akcipher - add PKE API
Add Public Key Encryption API.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>

Made CRYPTO_AKCIPHER invisible like other type config options.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-17 17:03:14 +08:00
Stephan Mueller
fbb145bc0a crypto: drbg - use pragmas for disabling optimization
Replace the global -O0 compiler flag from the Makefile with GCC
pragmas to mark only the functions required to be compiled without
optimizations.

This patch also adds a comment describing the rationale for the
functions chosen to be compiled without optimizations.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-09 22:26:00 +08:00
Herbert Xu
a5b151d11c crypto: rng - Remove krng
This patch removes krng so that DRBG can take its place.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04 15:05:02 +08:00
Martin Willi
71ebc4d1b2 crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539
This AEAD uses a chacha20 ablkcipher and a poly1305 ahash to construct the
ChaCha20-Poly1305 AEAD as defined in RFC7539. It supports both synchronous and
asynchronous operations, even if we currently have no async chacha20 or poly1305
drivers.

Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04 15:04:52 +08:00
Martin Willi
f979e014c5 crypto: poly1305 - Add a generic Poly1305 authenticator implementation
Poly1305 is a fast message authenticator designed by Daniel J. Bernstein.
It is further defined in RFC7539 as a building block for the ChaCha20-Poly1305
AEAD for use in IETF protocols.

This is a portable C implementation of the algorithm without architecture
specific optimizations, based on public domain code by Daniel J. Bernstein and
Andrew Moon.

Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04 15:04:50 +08:00
Martin Willi
c08d0e6473 crypto: chacha20 - Add a generic ChaCha20 stream cipher implementation
ChaCha20 is a high speed 256-bit key size stream cipher algorithm designed by
Daniel J. Bernstein. It is further specified in RFC7539 for use in IETF
protocols as a building block for the ChaCha20-Poly1305 AEAD.

This is a portable C implementation without any architecture specific
optimizations. It uses a 16-byte IV, which includes the 12-byte ChaCha20 nonce
prepended by the initial block counter. Some algorithms require an explicit
counter value, for example the mentioned AEAD construction.

Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04 15:04:49 +08:00
Stephan Mueller
bb5530e408 crypto: jitterentropy - add jitterentropy RNG
The CPU Jitter RNG provides a source of good entropy by
collecting CPU executing time jitter. The entropy in the CPU
execution time jitter is magnified by the CPU Jitter Random
Number Generator. The CPU Jitter Random Number Generator uses
the CPU execution timing jitter to generate a bit stream
which complies with different statistical measurements that
determine the bit stream is random.

The CPU Jitter Random Number Generator delivers entropy which
follows information theoretical requirements. Based on these
studies and the implementation, the caller can assume that
one bit of data extracted from the CPU Jitter Random Number
Generator holds one bit of entropy.

The CPU Jitter Random Number Generator provides a decentralized
source of entropy, i.e. every caller can operate on a private
state of the entropy pool.

The RNG does not have any dependencies on any other service
in the kernel. The RNG only needs a high-resolution time
stamp.

Further design details, the cryptographic assessment and
large array of test results are documented at
http://www.chronox.de/jent.html.

CC: Andreas Steffen <andreas.steffen@strongswan.org>
CC: Theodore Ts'o <tytso@mit.edu>
CC: Sandy Harris <sandyinchina@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-27 17:51:54 +08:00
Herbert Xu
a10f554fa7 crypto: echainiv - Add encrypted chain IV generator
This patch adds a new AEAD IV generator echainiv.  It is intended
to replace the existing skcipher IV generator eseqiv.

If the underlying AEAD algorithm is using the old AEAD interface,
then echainiv will simply use its IV generator.

Otherwise, echainiv will encrypt a counter just like eseqiv but
it'll first xor it against a previously stored IV similar to
chainiv.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-22 11:25:56 +08:00
Stephan Mueller
44cac4fce9 crypto: algif - enable AEAD interface compilation
Enable compilation of the AEAD AF_ALG support and provide a Kconfig
option to compile the AEAD AF_ALG support.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-04 22:12:39 +13:00
Stephan Mueller
2f3755381d crypto: algif_rng - enable RNG interface compilation
Enable compilation of the RNG AF_ALG support and provide a Kconfig
option to compile the RNG AF_ALG support.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-12-29 21:39:27 +11:00
Tim Chen
1e65b81a90 crypto: sha-mb - multibuffer crypto infrastructure
This patch introduces the multi-buffer crypto daemon which is responsible
for submitting crypto jobs in a work queue to the responsible multi-buffer
crypto algorithm.  The idea of the multi-buffer algorihtm is to put
data streams from multiple jobs in a wide (AVX2) register and then
take advantage of SIMD instructions to do crypto computation on several
buffers simultaneously.

The multi-buffer crypto daemon is also responsbile for flushing the
remaining buffers to complete the computation if no new buffers arrive
for a while.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-08-25 20:32:25 +08:00
Herbert Xu
f2c89a10de crypto: drbg - Use Kconfig to ensure at least one RNG option is set
This patch removes the build-time test that ensures at least one RNG
is set.  Instead we will simply not build drbg if no options are set
through Kconfig.

This also fixes a typo in the name of the Kconfig option CRYTPO_DRBG
(should be CRYPTO_DRBG).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-07-04 22:15:08 +08:00
Stephan Mueller
5bfcf65b38 crypto: drbg - compile the DRBG code
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-06-20 21:26:10 +08:00
Tim Chen
06e5a1f298 CRC32C: Add soft module dependency to load other accelerated crc32c modules
We added the soft module dependency of crc32c module alias
to generic crc32c module so other hardware accelerated crc32c
modules could get loaded and used before the generic version.
We also renamed the crypto/crc32c.c containing the generic
crc32c crypto computation to crypto/crc32c_generic.c according
to convention.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-02-25 19:45:04 +08:00
Cesar Eduardo Barros
fe8c8a1268 crypto: more robust crypto_memneq
Disabling compiler optimizations can be fragile, since a new
optimization could be added to -O0 or -Os that breaks the assumptions
the code is making.

Instead of disabling compiler optimizations, use a dummy inline assembly
(based on RELOC_HIDE) to block the problematic kinds of optimization,
while still allowing other optimizations to be applied to the code.

The dummy inline assembly is added after every OR, and has the
accumulator variable as its input and output. The compiler is forced to
assume that the dummy inline assembly could both depend on the
accumulator variable and change the accumulator variable, so it is
forced to compute the value correctly before the inline assembly, and
cannot assume anything about its value after the inline assembly.

This change should be enough to make crypto_memneq work correctly (with
data-independent timing) even if it is inlined at its call sites. That
can be done later in a followup patch.

Compile-tested on x86_64.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.eti.br>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-12-05 21:28:41 +08:00
Linus Torvalds
26b265cd29 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 - Made x86 ablk_helper generic for ARM
 - Phase out chainiv in favour of eseqiv (affects IPsec)
 - Fixed aes-cbc IV corruption on s390
 - Added constant-time crypto_memneq which replaces memcmp
 - Fixed aes-ctr in omap-aes
 - Added OMAP3 ROM RNG support
 - Add PRNG support for MSM SoC's
 - Add and use Job Ring API in caam
 - Misc fixes

[ NOTE! This pull request was sent within the merge window, but Herbert
  has some questionable email sending setup that makes him public enemy
  #1 as far as gmail is concerned.  So most of his emails seem to be
  trapped by gmail as spam, resulting in me not seeing them.  - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (49 commits)
  crypto: s390 - Fix aes-cbc IV corruption
  crypto: omap-aes - Fix CTR mode counter length
  crypto: omap-sham - Add missing modalias
  padata: make the sequence counter an atomic_t
  crypto: caam - Modify the interface layers to use JR API's
  crypto: caam - Add API's to allocate/free Job Rings
  crypto: caam - Add Platform driver for Job Ring
  hwrng: msm - Add PRNG support for MSM SoC's
  ARM: DT: msm: Add Qualcomm's PRNG driver binding document
  crypto: skcipher - Use eseqiv even on UP machines
  crypto: talitos - Simplify key parsing
  crypto: picoxcell - Simplify and harden key parsing
  crypto: ixp4xx - Simplify and harden key parsing
  crypto: authencesn - Simplify key parsing
  crypto: authenc - Export key parsing helper function
  crypto: mv_cesa: remove deprecated IRQF_DISABLED
  hwrng: OMAP3 ROM Random Number Generator support
  crypto: sha256_ssse3 - also test for BMI2
  crypto: mv_cesa - Remove redundant of_match_ptr
  crypto: sahara - Remove redundant of_match_ptr
  ...
2013-11-23 16:18:25 -08:00
Dmitry Kasatkin
ee08997fee crypto: provide single place for hash algo information
This patch provides a single place for information about hash algorithms,
such as hash sizes and kernel driver names, which will be used by IMA
and the public key code.

Changelog:
- Fix sparse and checkpatch warnings
- Move hash algo enums to uapi for userspace signing functions.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-10-25 17:14:03 -04:00
James Yonan
6bf37e5aa9 crypto: crypto_memneq - add equality testing of memory regions w/o timing leaks
When comparing MAC hashes, AEAD authentication tags, or other hash
values in the context of authentication or integrity checking, it
is important not to leak timing information to a potential attacker,
i.e. when communication happens over a network.

Bytewise memory comparisons (such as memcmp) are usually optimized so
that they return a nonzero value as soon as a mismatch is found. E.g,
on x86_64/i5 for 512 bytes this can be ~50 cyc for a full mismatch
and up to ~850 cyc for a full match (cold). This early-return behavior
can leak timing information as a side channel, allowing an attacker to
iteratively guess the correct result.

This patch adds a new method crypto_memneq ("memory not equal to each
other") to the crypto API that compares memory areas of the same length
in roughly "constant time" (cache misses could change the timing, but
since they don't reveal information about the content of the strings
being compared, they are effectively benign). Iow, best and worst case
behaviour take the same amount of time to complete (in contrast to
memcmp).

Note that crypto_memneq (unlike memcmp) can only be used to test for
equality or inequality, NOT for lexicographical order. This, however,
is not an issue for its use-cases within the crypto API.

We tried to locate all of the places in the crypto API where memcmp was
being used for authentication or integrity checking, and convert them
over to crypto_memneq.

crypto_memneq is declared noinline, placed in its own source file,
and compiled with optimizations that might increase code size disabled
("Os") because a smart compiler (or LTO) might notice that the return
value is always compared against zero/nonzero, and might then
reintroduce the same early-return optimization that we are trying to
avoid.

Using #pragma or __attribute__ optimization annotations of the code
for disabling optimization was avoided as it seems to be considered
broken or unmaintained for long time in GCC [1]. Therefore, we work
around that by specifying the compile flag for memneq.o directly in
the Makefile. We found that this seems to be most appropriate.

As we use ("Os"), this patch also provides a loop-free "fast-path" for
frequently used 16 byte digests. Similarly to kernel library string
functions, leave an option for future even further optimized architecture
specific assembler implementations.

This was a joint work of James Yonan and Daniel Borkmann. Also thanks
for feedback from Florian Weimer on this and earlier proposals [2].

  [1] http://gcc.gnu.org/ml/gcc/2012-07/msg00211.html
  [2] https://lkml.org/lkml/2013/2/10/131

Signed-off-by: James Yonan <james@openvpn.net>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-10-07 14:17:06 +08:00
Ard Biesheuvel
a62b01cd6c crypto: create generic version of ablk_helper
Create a generic version of ablk_helper so it can be reused
by other architectures.

Acked-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-24 06:02:24 +10:00
Herbert Xu
26052f9b9b crypto: crct10dif - Add fallback for broken initrds
Unfortunately, even with a softdep some distros fail to include
the necessary modules in the initrd.  Therefore this patch adds
a fallback path to restore existing behaviour where we cannot
load the new crypto crct10dif algorithm.

In order to do this, the underlying crct10dif has been split out
from the crypto implementation so that it can be used on the
fallback path.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-12 15:31:34 +10:00
Herbert Xu
68411521cc Reinstate "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"
This patch reinstates commits
	67822649d7
	39761214ee
	0b95a7f857
	31d939625a
	2d31e518a4

Now that module softdeps are in the kernel we can use that to resolve
the boot issue which cause the revert.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-07 12:56:26 +10:00
Linus Torvalds
b48a97be8e Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 "This push fixes a memory corruption issue in caam, as well as
  reverting the new optimised crct10dif implementation as it breaks boot
  on initrd systems.

  Hopefully crct10dif will be reinstated once the supporting code is
  added so that it doesn't break boot"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"
  crypto: caam - Fixed the memory out of bound overwrite issue
2013-07-24 11:05:18 -07:00
Herbert Xu
e70308ec0e Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"
This reverts commits
    67822649d7
    39761214ee
    0b95a7f857
    31d939625a
    2d31e518a4

Unfortunately this change broke boot on some systems that used an
initrd which does not include the newly created crct10dif modules.
As these modules are required by sd_mod under certain configurations
this is a serious problem.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-07-24 17:04:16 +10:00
Chanho Min
0ea8530dcf crypto: add lz4 Cryptographic API
Add support for lz4 and lz4hc compression algorithm using the lib/lz4/*
codebase.

[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Chanho Min <chanho.min@lge.com>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Herbert Xu <herbert@gondor.hengli.com.au>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:30 -07:00
Tim Chen
2d31e518a4 crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework
When CRC T10 DIF is calculated using the crypto transform framework, we
wrap the crc_t10dif function call to utilize it.  This allows us to
take advantage of any accelerated CRC T10 DIF transform that is
plugged into the crypto framework.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-05-20 20:11:01 +08:00
Jussi Kivilinna
93b5e86a6d crypto: add CMAC support to CryptoAPI
Patch adds support for NIST recommended block cipher mode CMAC to CryptoAPI.

This work is based on Tom St Denis' earlier patch,
 http://marc.info/?l=linux-crypto-vger&m=135877306305466&w=2

Cc: Tom St Denis <tstdenis@elliptictech.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-25 21:01:47 +08:00
Alexander Boyko
78c37d191d crypto: crc32 - add crc32 pclmulqdq implementation and wrappers for table implementation
This patch adds crc32 algorithms to shash crypto api. One is wrapper to
gerneric crc32_le function. Second is crc32 pclmulqdq implementation. It
use hardware provided PCLMULQDQ instruction to accelerate the CRC32 disposal.
This instruction present from Intel Westmere and AMD Bulldozer CPUs.

For intel core i5 I got 450MB/s for table implementation and 2100MB/s
for pclmulqdq implementation.

Signed-off-by: Alexander Boyko <alexander_boyko@xyratex.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-01-20 10:16:45 +11:00
Jussi Kivilinna
044ab52578 crypto: cast5/cast6 - move lookup tables to shared module
CAST5 and CAST6 both use same lookup tables, which can be moved shared module
'cast_common'.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-12-06 17:16:26 +08:00
Linus Torvalds
d25282d1c9 Merge branch 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module signing support from Rusty Russell:
 "module signing is the highlight, but it's an all-over David Howells frenzy..."

Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG.

* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits)
  X.509: Fix indefinite length element skip error handling
  X.509: Convert some printk calls to pr_devel
  asymmetric keys: fix printk format warning
  MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
  MODSIGN: Make mrproper should remove generated files.
  MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs
  MODSIGN: Use the same digest for the autogen key sig as for the module sig
  MODSIGN: Sign modules during the build process
  MODSIGN: Provide a script for generating a key ID from an X.509 cert
  MODSIGN: Implement module signature checking
  MODSIGN: Provide module signing public keys to the kernel
  MODSIGN: Automatically generate module signing keys if missing
  MODSIGN: Provide Kconfig options
  MODSIGN: Provide gitignore and make clean rules for extra files
  MODSIGN: Add FIPS policy
  module: signature checking hook
  X.509: Add a crypto key parser for binary (DER) X.509 certificates
  MPILIB: Provide a function to read raw data into an MPI
  X.509: Add an ASN.1 decoder
  X.509: Add simple ASN.1 grammar compiler
  ...
2012-10-14 13:39:34 -07:00
David Howells
964f3b3bf4 KEYS: Implement asymmetric key type
Create a key type that can be used to represent an asymmetric key type for use
in appropriate cryptographic operations, such as encryption, decryption,
signature generation and signature verification.

The key type is "asymmetric" and can provide access to a variety of
cryptographic algorithms.

Possibly, this would be better as "public_key" - but that has the disadvantage
that "public key" is an overloaded term.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-08 13:50:12 +10:30
Seth Jennings
35a1fc1873 powerpc/crypto: add 842 crypto driver
This patch add the 842 cryptographic API driver that
submits compression requests to the 842 hardware compression
accelerator driver (nx-compress).

If the hardware accelerator goes offline for any reason
(dynamic disable, migration, etc...), this driver will use LZO
as a software failover for all future compression requests.
For decompression requests, the 842 hardware driver contains
a software implementation of the 842 decompressor to support
the decompression of data that was compressed before the accelerator
went offline.

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-01 17:47:56 +08:00
Johannes Goetzfried
2b49b90672 crypto: cast6 - prepare generic module for optimized implementations
Rename cast6 module to cast6_generic to allow autoloading of optimized
implementations. Generic functions and s-boxes are exported to be able to use
them within optimized implementations.

Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-01 17:47:30 +08:00
Johannes Goetzfried
270b0c6b40 crypto: cast5 - prepare generic module for optimized implementations
Rename cast5 module to cast5_generic to allow autoloading of optimized
implementations. Generic functions and s-boxes are exported to be able to use
them within optimized implementations.

Signed-off-by: Johannes Goetzfried <Johannes.Goetzfried@informatik.stud.uni-erlangen.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-01 17:47:29 +08:00
Jussi Kivilinna
617ae7c7a1 crypto: camellia - rename camellia.c to camellia_generic.c
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-03-14 17:25:55 +08:00
Jussi Kivilinna
075e39df67 crypto: camellia - rename camellia module to camellia_generic
Rename camellia module to camellia_generic to allow optimized assembler
implementations to autoload with module-alias.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-03-14 17:25:55 +08:00