Commit Graph

232441 Commits

Author SHA1 Message Date
Vladislav Zolotarov
711c914688 bnx2x: Duplication in promisc mode
Prevent packets duplication for frames targeting FCoE L2 ring:
packets were arriving to stack from both L2 RSS and from FCoE
L2 in a promiscuous mode.

Configure FCoE L2 ring to DROP_ALL rx mode, when interface is
configured to PROMISC, and to accept only unicast frames, when
interface is configured to ALL_MULTI.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06 11:21:49 -08:00
Jesper Juhl
bf1f9ae050 sis900: Fix mem leak in sis900_rx error path
Fix memory leak in error path of sis900_rx(). If we don't do this we'll
leak the skb we dev_alloc_skb()'ed just a few lines above when the
variable goes out of scope.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-05 18:08:57 -08:00
Ajit Khaparde
e45ff01d3f benet: Avoid potential null deref in be_cmd_get_seeprom_data()
Found by: Jesper Juhl <jj@chaosbits.net>

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-05 17:58:18 -08:00
Vasiliy Kulikov
1e6d93e45b net: can: janz-ican3: world-writable sysfs termination file
Don't allow everybody to set terminator via sysfs.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04 13:06:27 -08:00
Vasiliy Kulikov
fef52b0171 net: can: at91_can: world-writable sysfs files
Don't allow everybody to write to mb0_id file.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04 13:06:27 -08:00
Ajit Khaparde
fea3af6780 MAINTAINERS: update email ids of the be2net driver maintainers.
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04 13:03:35 -08:00
Pavel Emelyanov
1158f762e5 bridge: Don't put partly initialized fdb into hash
The fdb_create() puts a new fdb into hash with only addr set. This is
not good, since there are callers, that search the hash w/o the lock
and access all the other its fields.

Applies to current netdev tree.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04 13:02:36 -08:00
Francois Romieu
f60ac8e7ab r8169: prevent RxFIFO induced loops in the irq handler.
While the RxFIFO interruption is masked for most 8168, nothing prevents
it to appear in the irq status word. This is no excuse to crash.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Ivan Vecera <ivecera@redhat.com>
Cc: Hayes <hayeswang@realtek.com>
2011-02-04 10:38:18 +01:00
Francois Romieu
1519e57fe8 r8169: RxFIFO overflow oddities with 8168 chipsets.
Some experiment-based action to prevent my 8168 chipsets locking-up hard
in the irq handler under load (pktgen ~1Mpps). Apparently a reset is not
always mandatory (is it at all ?).

- RTL_GIGA_MAC_VER_12
- RTL_GIGA_MAC_VER_25
  Missed ~55% packets. Note:
  - this is an old SiS 965L motherboard
  - the 8168 chipset emits (lots of) control frames towards the sender

- RTL_GIGA_MAC_VER_26
  The chipset does not go into a frenzy of mac control pause when it
  crashes yet but it can still be crashed. It needs more work.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Ivan Vecera <ivecera@redhat.com>
Cc: Hayes <hayeswang@realtek.com>
2011-02-04 10:38:10 +01:00
Ivan Vecera
b5ba6d12bd r8169: use RxFIFO overflow workaround for 8168c chipset.
I found that one of the 8168c chipsets (concretely XID 1c4000c0) starts
generating RxFIFO overflow errors. The result is an infinite loop in
interrupt handler as the RxFIFOOver is handled only for ...MAC_VER_11.
With the workaround everything goes fine.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes <hayeswang@realtek.com>
2011-02-04 10:38:06 +01:00
Julia Lawall
38db9e1db1 include/net/genetlink.h: Allow genlmsg_cancel to accept a NULL argument
nlmsg_cancel can accept NULL as its second argument, so for similarity,
this patch extends genlmsg_cancel to be able to accept a NULL second
argument as well.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-03 20:47:08 -08:00
David S. Miller
e2d57766e6 net: Provide compat support for SIOCGETMIFCNT_IN6 and SIOCGETSGCNT_IN6.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-03 18:05:29 -08:00
David S. Miller
ca6b8bb097 net: Support compat SIOCGETVIFCNT ioctl in ipv4.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-03 17:24:28 -08:00
David S. Miller
0033d5ad27 net: Fix bug in compat SIOCGETSGCNT handling.
Commit 709b46e8d9 ("net: Add compat
ioctl support for the ipv4 multicast ioctl SIOCGETSGCNT") added the
correct plumbing to handle SIOCGETSGCNT properly.

However, whilst definiting a proper "struct compat_sioc_sg_req" it
isn't actually used in ipmr_compat_ioctl().

Correct this oversight.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-03 17:21:31 -08:00
David S. Miller
9690c636ac niu: Fix races between up/down and get_stats.
As reported by Flavio Leitner, there is no synchronization to protect
NIU's get_stats method from seeing a NULL pointer in either
np->rx_rings or np->tx_rings.  In fact, as far as ->ndo_get_stats
is concerned, these values are set completely asynchronously.

Flavio attempted to fix this using a RW semaphore, which in fact
works most of the time.  However, dev_get_stats() can be invoked
from non-sleepable contexts in some cases, so this fix doesn't
work in all cases.

So instead, control the visibility of the np->{rx,tx}_ring pointers
when the device is being brough up, and use properties of the device
down sequence to our advantage.

In niu_get_stats(), return immediately if netif_running() is false.
The device shutdown sequence first marks the device as not running (by
clearing the __LINK_STATE_START bit), then it performans a
synchronize_rcu() (in dev_deactive_many()), and then finally it
invokes the driver ->ndo_stop() method.

This guarentees that all invocations of niu_get_stats() either see
netif_running() as false, or they see the channel pointers before
->ndo_stop() clears them out.

If netif_running() is true, protect against startup races by loading
the np->{rx,tx}_rings pointer into a local variable, and punting if
it is NULL.  Use ACCESS_ONCE to prevent the compiler from reloading
the pointer on us.

Also, during open, control the order in which the pointers and the
ring counts become visible globally using SMP write memory barriers.
We make sure the np->num_{rx,tx}_rings value is stable and visible
before np->{rx,tx}_rings is.

Such visibility control is not necessary on the niu_free_channels()
side because of the RCU sequencing that happens during device down as
described above.  We are always guarenteed that all niu_get_stats
calls are finished, or will see netif_running() false, by the time
->ndo_stop is invoked.

Reported-by: Flavio Leitner <fleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-03 16:12:50 -08:00
David S. Miller
0bc0be7f20 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6 2011-02-02 15:52:23 -08:00
Peter Chubb
34a6ef381d tcp_ecn is an integer not a boolean
There was some confusion at LCA as to why the sysctl tcp_ecn took one
of three values when it was documented as a Boolean.  This patch fixes
the documentation.

Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02 15:39:58 -08:00
Chuck Ebbert
94dde7e451 atl1c: Add missing PCI device ID
Commit 8f574b35f2 ("atl1c: Add AR8151 v2
support and change L0s/L1 routine") added support for a new adapter
but failed to add it to the PCI device table.

Signed-Off-By: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02 15:02:08 -08:00
Stefan Weil
08b018327c s390: Fix possibly wrong size in strncmp (smsgiucv)
This error was reported by cppcheck:
drivers/s390/net/smsgiucv.c:63: error: Using sizeof for array given as
function argument returns the size of pointer.

Although there is no runtime problem as long as sizeof(u8 *) == 8,
this misleading code should get fixed.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02 15:00:02 -08:00
Stefan Weil
5df979d692 s390: Fix wrong size in memcmp (netiucv)
This error was reported by cppcheck:
drivers/s390/net/netiucv.c:568: error: Using sizeof for array given
as function argument returns the size of pointer.

sizeof(ipuser) did not result in 16 (as many programmers would have
expected) but sizeof(u8 *), so it is 4 or 8, too small here.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02 15:00:02 -08:00
Ursula Braun
d0ff1f5236 qeth: allow OSA CHPARM change in suspend state
For OSA the CHPARM-definition determines the number of available
outbound queues.
A CHPARM-change may occur while a Linux system with probed
OSA device is in suspend state. This patch enables proper
resuming of an OSA device in this case.

Signed-off-by: Ursula braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02 15:00:01 -08:00
Ursula Braun
8b2e18f662 qeth: allow HiperSockets framesize change in suspend
For HiperSockets the framesize-definition determines the selected
mtu-size and the size of the allocated qdio buffers.
A framesize-change may occur while a Linux system with probed
HiperSockets device is in suspend state. This patch enables proper
resuming of a HiperSockets device in this case.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02 15:00:00 -08:00
Frank Blaschka
9853b97bcc qeth: add more strict MTU checking
HiperSockets and OSA hardware report a maximum MTU size. Add checking
to reject larger MTUs than allowed by hardware.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02 15:00:00 -08:00
Ursula Braun
221c17fe87 qeth: show new mac-address if its setting fails
Setting of a MAC-address may fail because an already used MAC-address
is to bet set or because of authorization problems. In those cases
qeth issues a message, but the mentioned MAC-address is not the
new MAC-address to be set, but the actual MAC-address. This patch
chooses now the new MAC-address to be set for the error messages.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02 14:59:59 -08:00
Andy Gospodarek
6d152e23ad gro: reset skb_iif on reuse
Like Herbert's change from a few days ago:

66c46d741e gro: Reset dev pointer on reuse

this may not be necessary at this point, but we should still clean up
the skb->skb_iif.  If not we may end up with an invalid valid for
skb->skb_iif when the skb is reused and the check is done in
__netif_receive_skb.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-02 14:53:25 -08:00
Ajit Khaparde
9b6cefd659 be2net: remove netif_stop_queue being called before register_netdev.
It is illegal to call netif_stop_queue before register_netdev.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01 15:41:59 -08:00
Ajit Khaparde
a89e828397 be2net: fix a crash seen during insmod/rmmod test
While running insmod/rmood in a loop, an unnecessary netif_stop_queue
causes the system to crash. Remove the netif_stop_queue call
and netif_start_queue in the link status update path.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01 15:41:13 -08:00
Stefan Weil
a29ae23f68 isdn: icn: Fix potentially wrong string handling
This warning was reported by cppcheck:
drivers/isdn/icn/icn.c:1641: error: Dangerous usage of 'rev' (strncpy doesn't always 0-terminate it)

If strncpy copied 20 bytes, the destination string rev was not terminated.
The patch adds one more byte to rev and makes sure that this byte is
always 0.

Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01 14:17:51 -08:00
Vladislav Zolotarov
d9c8f498c3 bnx2x: multicasts in NPAR mode
The chip was erroneously configured to accept all multicast frames
in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings
when in an NPAR mode. This caused packet duplication for every received multicast
frame in this mode.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01 14:05:30 -08:00
Alan Cox
f97f3057fd depca: Fix warnings
Replace the rather weird use of ++ with + 1 as the value is being assigned

Signed-off-by: Alan Cox <alan@linux.intel.com>
2011-02-01 13:19:07 -08:00
David S. Miller
2ba5e1feaa Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2011-02-01 13:08:59 -08:00
David S. Miller
62175c75fb Merge branch 'vhost-net' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost 2011-02-01 12:56:11 -08:00
Stefan Weil
48bc9a2cce vxge: Fix wrong boolean operator
This error is reported by cppcheck:
drivers/net/vxge/vxge-config.c:3693: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead?

It looks like cppcheck is correct, so fix this. No test was run.

Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com>
Cc: Sivakumar Subramani <sivakumar.subramani@exar.com>
Cc: Sreenivasa Honnur <sreenivasa.honnur@exar.com>
Cc: Jon Mason <jon.mason@exar.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Acked-by: Ram Vepa <ram.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01 12:30:23 -08:00
Mohammed Shafi Shajakhan
479600777b ath9k: Fix memory leak due to failed PAPRD frames
free the skb's when the Tx of PAPRD frames fails and also add a debug
message indicating that.

Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-01 11:06:00 -05:00
Pablo Neira Ayuso
3db7e93d33 netfilter: ecache: always set events bits, filter them later
For the following rule:

iptables -I PREROUTING -t raw -j CT --ctevents assured

The event delivered looks like the following:

 [UPDATE] tcp      6 src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED]

Note that the TCP protocol state is not included. For that reason
the CT event filtering is not very useful for conntrackd.

To resolve this issue, instead of conditionally setting the CT events
bits based on the ctmask, we always set them and perform the filtering
in the late stage, just before the delivery.

Thus, the event delivered looks like the following:

 [UPDATE] tcp      6 432000 ESTABLISHED src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED]

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-02-01 16:06:30 +01:00
Pablo Neira Ayuso
9d0db8b6b1 netfilter: arpt_mangle: fix return values of checkentry
In 135367b "netfilter: xtables: change xt_target.checkentry return type",
the type returned by checkentry was changed from boolean to int, but the
return values where not adjusted.

arptables: Input/output error

This broke arptables with the mangle target since it returns true
under success, which is interpreted by xtables as >0, thus
returning EIO.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-02-01 16:03:46 +01:00
Michael S. Tsirkin
5e18247b02 vhost: rcu annotation fixup
When built with rcu checks enabled, vhost triggers
bogus warnings as vhost features are read without
dev->mutex sometimes, and private pointer is read
with our kind of rcu where work serves as a
read side critical section.

Fixing it properly is not trivial.
Disable the warnings by stubbing out the checks for now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-02-01 16:48:46 +02:00
Stefan Weil
fca540ab5f enc28j60: Fix reading of transmit status vector
This error was reported by cppcheck:
drivers/net/enc28j60.c:815: error: Using sizeof for array given as function argument returns the size of pointer.

The original code reads 4 or 8 bytes instead of TSV_SIZE (= 100) bytes.
I just fixed the code, but did not run any tests.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31 20:56:54 -08:00
Eric W. Biederman
bf36076a67 net: Fix ipv6 neighbour unregister_sysctl_table warning
In my testing of 2.6.37 I was occassionally getting a warning about
sysctl table entries being unregistered in the wrong order.  Digging
in it turns out this dates back to the last great sysctl reorg done
where Al Viro introduced the requirement that sysctl directories
needed to be created before and destroyed after the files in them.

It turns out that in that great reorg /proc/sys/net/ipv6/neigh was
overlooked.  So this patch fixes that oversight and makes an annoying
warning message go away.

>------------[ cut here ]------------
>WARNING: at kernel/sysctl.c:1992 unregister_sysctl_table+0x134/0x164()
>Pid: 23951, comm: kworker/u:3 Not tainted 2.6.37-350888.2010AroraKernelBeta.fc14.x86_64 #1
>Call Trace:
> [<ffffffff8103e034>] warn_slowpath_common+0x80/0x98
> [<ffffffff8103e061>] warn_slowpath_null+0x15/0x17
> [<ffffffff810452f8>] unregister_sysctl_table+0x134/0x164
> [<ffffffff810e7834>] ? kfree+0xc4/0xd1
> [<ffffffff813439b2>] neigh_sysctl_unregister+0x22/0x3a
> [<ffffffffa02cd14e>] addrconf_ifdown+0x33f/0x37b [ipv6]
> [<ffffffff81331ec2>] ? skb_dequeue+0x5f/0x6b
> [<ffffffffa02ce4a5>] addrconf_notify+0x69b/0x75c [ipv6]
> [<ffffffffa02eb953>] ? ip6mr_device_event+0x98/0xa9 [ipv6]
> [<ffffffff813d2413>] notifier_call_chain+0x32/0x5e
> [<ffffffff8105bdea>] raw_notifier_call_chain+0xf/0x11
> [<ffffffff8133cdac>] call_netdevice_notifiers+0x45/0x4a
> [<ffffffff8133d2b0>] rollback_registered_many+0x118/0x201
> [<ffffffff8133d3af>] unregister_netdevice_many+0x16/0x6d
> [<ffffffff8133d571>] default_device_exit_batch+0xa4/0xb8
> [<ffffffff81337c42>] ? cleanup_net+0x0/0x194
> [<ffffffff81337a2a>] ops_exit_list+0x4e/0x56
> [<ffffffff81337d36>] cleanup_net+0xf4/0x194
> [<ffffffff81053318>] process_one_work+0x187/0x280
> [<ffffffff8105441b>] worker_thread+0xff/0x19f
> [<ffffffff8105431c>] ? worker_thread+0x0/0x19f
> [<ffffffff8105776d>] kthread+0x7d/0x85
> [<ffffffff81003824>] kernel_thread_helper+0x4/0x10
> [<ffffffff810576f0>] ? kthread+0x0/0x85
> [<ffffffff81003820>] ? kernel_thread_helper+0x0/0x10
>---[ end trace 8a7e9310b35e9486 ]---

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31 20:54:17 -08:00
Ken Kawasaki
785e8cc39b axnet_cs: reduce delay time at ei_rx_overrun
axnet_cs:
    mdelay of 10ms is too long at ei_rx_overrun.
    It should be reduced to 2ms.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31 20:53:20 -08:00
Tom Herbert
8587523640 net: Check rps_flow_table when RPS map length is 1
In get_rps_cpu, add check that the rps_flow_table for the device is
NULL when trying to take fast path when RPS map length is one.
Without this, RFS is effectively disabled if map length is one which
is not correct.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31 16:23:42 -08:00
Chuck Ebbert
cc09b5f646 CAN: softing driver depends on IOMEM
Without this dependency the softing driver will be buildable on s390,
where it fails.

Signed-Off-By: Chuck Ebbert <cebbert@redhat.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31 13:20:21 -08:00
Roland Dreier
ec831ea72e net: Add default_mtu() methods to blackhole dst_ops
When an IPSEC SA is still being set up, __xfrm_lookup() will return
-EREMOTE and so ip_route_output_flow() will return a blackhole route.
This can happen in a sndmsg call, and after d33e455337 ("net: Abstract
default MTU metric calculation behind an accessor.") this leads to a
crash in ip_append_data() because the blackhole dst_ops have no
default_mtu() method and so dst_mtu() calls a NULL pointer.

Fix this by adding default_mtu() methods (that simply return 0, matching
the old behavior) to the blackhole dst_ops.

The IPv4 part of this patch fixes a crash that I saw when using an IPSEC
VPN; the IPv6 part is untested because I don't have an IPv6 VPN, but it
looks to be needed as well.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31 13:16:00 -08:00
Mathias Krause
9b00b4157f wl12xx: fix use after free
When DEBUG_SPI is included in the debug log level wl1271_spi_reset()
will dump the already freed memory instead of the SPI buffer.

This bug was spotted by the semantic patch tool coccinelle using the
script found at scripts/coccinelle/free/kfree.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-31 14:48:15 -05:00
Yaniv Rosner
c4c9310674 bnx2x: Update bnx2x version to 1.62.00-5
Update bnx2x version to 1.62.00-5

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30 22:26:17 -08:00
Yaniv Rosner
5866df6d07 bnx2x: Fix potential link loss in multi-function mode
All functions on a port should be set to take the MDC/MDIO lock to avoid contention on the bus

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30 22:26:16 -08:00
Yaniv Rosner
c8e64df48a bnx2x: Fix port swap for BCM8073
Fix link on BCM57712 + BCM8073 when port swap is enabled. Common PHY reset was done on the wrong port.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30 22:26:16 -08:00
Yaniv Rosner
53eda06def bnx2x: Fix LED blink rate on BCM84823
Fix blink rate of activity LED of the BCM84823 on 10G link

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30 22:26:15 -08:00
Yaniv Rosner
81a3516c4c bnx2x: Remove setting XAUI low-power for BCM8073
A rare link issue with the BCM8073 PHY may occur due to setting XAUI low power mode, while the PHY microcode already does that.
The fix is not to set set XAUI low power mode for this PHY.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30 22:26:15 -08:00
David S. Miller
81c2bdb688 Merge branch 'batman-adv/merge-oopsonly' of git://git.open-mesh.org/ecsv/linux-merge 2011-01-30 22:16:34 -08:00